A docked ScriptUI panel only ever saw its preferredSize: the host drew
it in a scroll area at max(dock, preferred) and the script's window never
learned the dock. scriptui.resize now gives a window a size: the script's
window takes it, lays itself out again and runs onResizing / onResize.
The dock host sends it whenever the panel's dock size changes, so
window.size is the dock's, as in After Effects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drag that started on a script control stopped at the window edge:
moves outside were dropped and a release outside never reached the
control. While a button is held, the control it was pressed on now gets
the moves (with screen and control-relative coordinates) and the
release, wherever the pointer is, as in After Effects. Every MouseEvent
also carries buttons (held: 1 left, 2 right, 4 middle), so a handler can
tell a drag from a hover; scriptui.mouse accepts it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since #2107, Replace Footage keeps an item's kind by default, so
replace() on a sequence item brought the new file's whole numbered run.
In After Effects, replace() swaps in the one file and replaceWithSequence()
brings a run; replace() now asks for exactly that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Carry property, Font and Media Replacement overrides into the collapsed nested EvalCtx so nested layers render beyond the precomp frame instead of falling back to a clipped, flattened image. Key the layer cache on instance overrides to keep distinct collapsed instances isolated.
The tests now sit with the crate's other test modules under crates/script/src/tests/ and are declared in tests.rs. docs/scripting-parity.md points at the new path.
`backpressure` stopped writing at the first WouldBlock. On macOS the
accepted stream does not keep the listener's 4 KiB receive buffer (it
gets about 114 KiB), so that WouldBlock only meant the 4 KiB send buffer
was full; it drained into the peer, and the 64 KiB write in
a_write_to_a_peer_that_stops_reading_fails_after_the_timeout and
a_blocked_socket_doesnt_hold_up_the_others_and_close_interrupts_it then
succeeded instead of blocking. Both tests failed on every run.
The helper now stops only after writes have stayed blocked for 200 ms,
still within its 16 MiB and 5 s limits. The socket code is unchanged.
Upstream moved crates/ui-egui/src/menus.rs into menus/*.rs; the dynamic-menu change that
draws script folders as submenus now lives in menus/bar.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Wiggle Paths had Size, Detail, Points, Wiggles/Second, Correlation,
Temporal Phase and Random Seed, but no Spatial Phase, which After
Effects lists among its properties (ADBE Vector Spatial Phase). Spatial
Phase now moves each point's own displacement along its subpath: 360
degrees is once around, and a fraction of a point is interpolated
between neighbors. At 0 degrees a path draws as before.
A project saved without the property gets it at 0 degrees, after
Temporal Phase, when it opens. Scripts can read and set every Wiggle
Paths property by its match name.
A shape layer's Contents > Add menu had every After Effects path operation
except Wiggle Transform. It is now a shape item (layer.addShapeItem kind
wiggler, "ADBE Vector Filter - Wiggler" for scripts) with Wiggles/Second,
Correlation, Temporal Phase, Spatial Phase, Random Seed and a Transform
group whose Anchor Point, Position, Scale and Rotation set how far each
transformation wiggles.
The values come from the Wiggly selector's noise, with each Repeater copy
as one unit: the copies of a Repeater above the operation, in its group or
a nested one, wiggle independently as far as Correlation allows, and the
copies of a Repeater below it wiggle the same way. A paint above it whose
paths all move by one matrix moves its gradient and stroke scale with them.
The layer cache keys a layer with a Wiggle Transform by time.
An extension that ships several panels no longer adds one Window menu entry per panel:
`Scripts/ScriptUI Panels/Motion Kit/Animate.jsx` shows as Window > Motion Kit > Animate.jsx,
and a subfolder of `Scripts/` is a submenu of File > Scripts. Top-level scripts are unchanged.
- Script names may be `Folder/File.jsx`: exactly one folder, each part a bare name (no `..`,
`\`, NUL or empty part), never `ScriptUI Panels/...` under `Scripts/`.
- window.scriptPanel, file.runScript, file.uninstallScript, file.scripts.list and
scriptui_panels.json take such names; a panel's tab is titled after its file.
- ConfigStore::list_dirs (DirConfig, MemoryConfig) lists the subfolders.
- menus::dynamic_nodes groups a folder's entries into a MenuNode::Submenu; the egui and native
menus draw it with their submenu code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Scripts in Scripts/Startup and Scripts/Shutdown in the settings folder
were never run. The desktop and web apps now run the Startup scripts at
launch, before a project opens, and the desktop app runs the Shutdown
scripts as it quits, after the project is closed. Each folder runs in
alphabetical order with case ignored, and files larger than 16 MiB are
not run. A Startup script that fails is reported in a toast and in the
log, a Shutdown script that fails is reported in the log, and the next
one still runs.
A Startup script that waits in a modal dialog goes on when the dialog
closes, while the next scripts run. A Shutdown script's dialogs close
as if canceled. With the settings folder on disk, each script runs as
its file, so #include, $.fileName and $.evalFile resolve against the
script's own folder.
The new commands file.runStartupScripts and file.runShutdownScripts
return the scripts that ran, those still waiting in a dialog, and those
that failed. Like script.run, both are refused in confined automation
sessions, in batches and in script steps, which now read one list of
script commands (RUNS_SCRIPTS). The list also holds window.scriptPanel
and window.restoreScriptPanels, which run ScriptUI panel scripts and
were not refused on main either. The apps still call
window.restoreScriptPanels at launch. plugins.md, scripting-parity.md,
gaps.md, target-app-parity.md and agents.md describe the folders. Each script
still runs in its own global scope, so a Startup script's variables are
not available to later scripts.
Poison recovery, OsStr::to_str and char predicates only; S4325 casts are
f64 to f32 and stay.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
file.projectSettings takes frameStart (0|1), the Project Settings dialog shows Frame Count, and scripts get app.project.framesCountType and displayStartFrame. The setting was already read by the Frames and Feet + Frames time display; nothing could change it.
The setters go through `comp.settings`, which defaults to the Composition Settings dialog's
centre anchor, so `comp.width = 800` on a 400-wide comp shifted every unparented layer — and
all of its position keys — by 200 px. A script that resized a precomp then found its pixel
coordinates had moved under it.
After Effects' width and height setters only change the frame; moving the contents is what
"resize from centre" scripts do for themselves. The setters now pass `anchor: 0` (top left).
The dialog, which is where the anchor belongs, is untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- scriptui.js: replace the self-comparison NaN check (o.max === o.max) with
the explicit Number.isNaN(o.max) (S1764).
- sw.js: mark the fire-and-forget cache.put() with void and a .catch() so the
promise rejection is handled (S9383).
- prelude.js: return __err(...) from the activeCamera getter so every path
yields a value (S4275); __err always throws, so behavior is unchanged.
A 2-D point property took any array: `[1, 2, 3]` and `[1, 2, 3, 4]` were cut to `[1, 2]` and
`[1]` was broadcast to `[1, 1]`, each reported as success, so a script holding a wrong value
silently did something else instead of failing. After Effects raises "Array is not of the
correct dimension" and leaves the property unchanged.
The length must now match the property's dimension, with the one exception After Effects also
makes: two values for a 3-D property, where z stays 0, so `position.setValue([x, y])` keeps
working.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Alt/Option-drag a Project item onto a Timeline layer, or press Ctrl+Alt+/ (Cmd+Opt+/) with layers and an item selected, to swap the layer's source. The layer keeps its name, timing, transforms, keyframes, expressions, effects, masks, switches, parenting and track matte; a source with audio adds Audio properties when missing. Precompositions can't be nested inside themselves.
AVLayer.replaceSource now runs the same engine command and closes the replaceSource part of #813.
BFlat