The picker marked every pass it drew, including the one it closed in, so
for one pass after closing the dialog Escape handler still stepped aside
and a quick second Escape did nothing. The mark is now set only while the
picker stays open and cleared in the pass it closes (OK, Cancel, Escape or
a click outside); the picker also consumes the Escape it handles.
Test: the_escape_after_the_picker_closes_cancels_the_editor presses Escape
to close the picker and again in the very next pass, with no settling
frames: the editor cancels. It fails on the previous marking.
Problem: Object Matte computed its frames only on demand while rendering, so
playing a shot stalled on every untracked frame, there was no progress or way
to stop, and nothing kept the mattes once computed.
Fix: Object Matte runs through Roto Brush's job machinery (one job slot,
cancellable with roto.cancel, a worker thread on the desktop, a Web Worker in
the browser, never the UI thread). objectMatte.propagate computes the frames
around the reference frame (clipped to the layer) outward, filling the same
content-keyed segmentation cache the renderer reads; the engine's sync now
queues an instance for background tracking when its frames or prompt change.
objectMatte.freeze stores the final mattes in a new hidden Frozen parameter
(Roto Brush's FrozenCache format) under a key of the input, prompt, span,
model and matte settings; renders use them without segmenting while the key
matches; a frozen prompt is refused until objectMatte.unfreeze. Freeze is one
undo step and is dropped if the prompt changed meanwhile.
objectMatte.status reports progress, frozen state and computed frames. Effect
Controls shows Freeze / Unfreeze and Track / Stop with a status line (progress
banner). The frontend now polls Roto Brush / Object Matte jobs on their own:
before, a finished job (and so a Freeze result) was only picked up while a
Warp Stabilizer job was active. Job progress is set before the worker starts.
Tests: engine tests_roto::object_matte_background_job_cancel_and_freeze
(queued by the edit, returns at once with progress, cancel keeps a partial
result, completion computes all 25 frames, frozen renders recompute nothing,
unfreeze recomputes, undo restores); effects object_matte job_frames and
frozen-matte tests (stored pattern used, key mismatch and damaged data
ignored); ui-egui ui_object_matte Effect Controls Freeze end to end.
docs/agents.md: Object Matte section; docs/effects.md regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: Object Matte could only be applied through the objectMatte.apply
command; After Effects 26.2 picks the object directly in the viewer (click it,
or drag a box around it).
Fix: an Object Matte tool (with Roto Brush & Refine Edge in the Alt+W slot,
icon drawn in code). In the Composition viewer a click sets a point prompt and
a drag a box prompt (its centre the point) on the footage, solid or comp layer
under the pointer, converted to layer pixels through the layer's transform.
The layer's Object Matte (the selected one, else its last) is re-prompted;
Shift adds another. Everything goes through objectMatte.apply, which gained
`effect` to re-prompt an instance (point, box or no box, reference frame; the
reach kept unless given), so each prompt is one undo step; the effect is then
selected, so its point controls show in the viewer. Hover draws a crosshair
and the outline of the layer that would get the matte (a live matte preview
would need a segmentation per pointer move). Automation ids:
viewer.objectMatte.crosshair / .target / .box, tools.ObjectMatte.
Tests: ui-egui ui_object_matte (hover, click, drag box re-prompts the same
effect, Shift-click adds one, undo steps); engine
tests_roto::object_matte_reprompt_updates_the_instance. Checked with the
headless snapshot example (hover crosshair, box drag isolating a disk).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: floating panels lived inside the main window only, so on a
two-screen setup no panel could go onto the second monitor (#486).
Fix: panel menu > Move Panel to New Window (and the agent/control command
`window.panelWindow {panel, window?}`) undocks the panel if needed and shows
its floating group in a native egui viewport the user can drag to any screen;
Move Panel to Main Window or closing the window brings it back. The window's
place and size are kept in the workspace (sanitised against hostile values)
and restored on the next start. Browser and test builds, which embed
viewports, show it as an in-app window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A mouse click gives a Project row no keyboard focus, and the arrow keys
only move keyboard focus when a row already had it, so Delete /
Backspace, Cmd+D and Enter keep working for mouse users, also after an
arrow key moved the selection. Pin that down with a headless test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: with the Project panel focused the arrow keys did nothing (After
Effects selects the previous / next item, extends with Shift and opens /
closes folders with Right / Left). The custom-drawn rows, sort headers,
twirls, label swatches, proxy switches and footer buttons reached
AccessKit with no name or role, the empty list area and each row's name
cell were unnamed extra Tab stops, a Tab-focused row showed no focus
ring, and the arrows then moved egui's spatial focus instead.
Fix: Up / Down select the previous / next row (Shift extends from the
anchor), Right opens and Left closes the selected folder or selects the
parent; the moved-to row scrolls into view. A row with keyboard focus
keeps the arrows, focus follows the selection and the panel takes focus.
Rows are AccessKit tree items named "<name>, <type>" with selected,
level and expanded state; headers and row / footer buttons are named
buttons; one Tab stop per row and a focus ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: ScriptUI controls never sent mouse events to scripts.
addEventListener("mousedown" | "mouseup" | "mousemove" | "mouseover" |
"mouseout" | "click") listeners never ran, so custom-drawn controls
(onDraw + mouse, as DuScriptUI builds them) could not react to the pointer.
docs/plugins.md listed this as missing.
Fix: scriptui.js builds a ScriptUI MouseEvent (clientX/clientY relative to
the target, button, detail = click count, screenX/Y, modifier keys,
getModifierState, stopPropagation, preventDefault) and delivers it in the
capture, target and bubble phases. addEventListener takes the capture flag.
The parent walk is bounded, so a script-made parent cycle cannot hang it.
Each published control lists the mouse events a listener wants
(Widget::mouse, inherited from containers). The new scriptui.mouse
command dispatches one event with clamped, finite values and rejects
unknown types and disabled controls. The egui ScriptUI view hit-tests the
pointer over script windows and docked panels, skipping covered layers and
windows blocked by a modal dialog. It sends mouseover/mouseout,
mousemove, mousedown/mouseup with click counts, and a click carrying the
pointer details in place of the plain click, so a checkbox still toggles
once. Handlers run under the existing script limits; a throwing listener
reports an error and the window keeps working.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: After Effects 26.2 spreads a Ctrl+Alt (Cmd+Opt) hot-text scrub
over the selected layers by selection order (first unchanged, last the
whole change, the ones between even shares). Our multi-layer scrub
(#491) always moved every selected layer by the same change.
Fix: prop.set takes `proportional` (with `selected` + `offset`); each
participating layer, the scrubbed one included, gets index/(n-1) of the
change in selection order, in one undo step; the first layer is left
alone (no key added). The Timeline value editor sends it while Ctrl+Alt
(Cmd+Opt) is held; that chord no longer fine-scrubs or unlinks Scale.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: the Media Browser lists .mxf files, but File > Import's dialog
filtered them out and media::is_importable refused them, although the
pinned FilmCraft codecs behind crates/media already demux MXF (AVC,
MPEG-2 / XDCAM / D-10, VC-3 / DNxHD, ProRes, PCM audio) by content.
Fix: add "mxf" to VIDEO_EXTENSIONS and to the File > Import and Set
Proxy dialog filters. Tests check MPEG-2 4:2:2 long-GOP + 24-bit PCM and
DNxHD 36 MXF against ffmpeg frames (>35 dB, measured 64-67 dB), audio
level, and that the Import dialog offers MXF. AVI stays open: FilmCraft
has no AVI demuxer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: EffectCraft shipped only 8 original text-animator presets against
After Effects' 621; there was no Transitions category (ranked gap #7).
Fix: an original preset library, crates/engine/presets/transitions.json
(23 presets on our own Transition effects and layer opacity: fades,
directional and diagonal wipes, clock and fan reveals, blinds and slats,
pixel/mosaic dissolves, card flips, CC grid, radial scale, line sweep and
jaws wipes; In and Out). New commands anim.applyBuiltinPreset (adds the
effects with values and keyframes from the current time, one undo step,
reports any path that doesn't fit) and anim.builtinPresets. Effects &
Presets lists them under * Animation Presets > Transitions; double-click
applies. Sidecar and ATTRIBUTION.md entry; gaps/effects-parity updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: After Effects 26.3's font menu can show only variable fonts.
EffectCraft's font menus (Character panel, Properties ▸ Text) had no such
filter, and text.fonts / MCP list_fonts didn't say which families are
variable.
Fix: the font scan marks a face variable when its table directory has an
fvar table declaring axes (header read only, no extra file loading). The
font menu gets a "Variable fonts only" checkbox above the results; it
combines with the typed search, keeps the keyboard in the search field and
stays set while the app runs. text.fonts reports `variable` per family and
takes `{variable: true}`; list_fonts passes it through. Catalog rows for
ja, zh-Hans, zh-Hant and uk.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: with shape layers selected, the Tools bar's Fill Options / Stroke
Options (None, Solid Color, Linear Gradient, Radial Gradient, and the
swatch's Alt-click cycle) only changed the defaults for new shapes.
shape.fillStroke had no kind, so a selected layer's fill or stroke could
not be removed or turned into a gradient from the toolbar; it had to be
edited in the Timeline. The swatch also kept showing the tool's kind, not
the layer's.
Fix: shape.fillStroke takes fillType / strokeType. None switches the
layers' Fills and Gradient Fills (or Strokes) off; another kind switches
them on and turns them into that kind, keeping the uid and the
properties both kinds share (blend mode, opacity, width, dashes...), and
gives a group with paths and no such item one (gradients span the
group's paths). It reports the first layer's fillType / strokeType, and
the toolbar shows them. The kind picks in the options popup and the
Alt-click cycle apply to the selected shape layers, one undo step each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: Mesh Warp keeps its Distortion Mesh in a hidden text parameter,
and the viewer only draws handles for point parameters (Bezier Warp's),
so with Mesh Warp selected there was no grid and nothing to drag: the
effect could not warp anything from the UI.
Fix: with a Mesh Warp effect (or one of its parameters) selected and
layer controls shown, the viewer draws the (rows+1)x(columns+1) grid
over the layer in effect space, with a handle on every vertex
(automation id viewer.meshWarp.<fx>.<row>.<col>). Dragging a vertex
writes its offset to the `mesh` parameter through prop.set, one undo
step per drag; a mesh that does not match Rows/Columns starts from the
undistorted grid, as it renders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: After Effects 26.3 pastes copied vector artwork as shape layers. Edit ▸ Paste only
knew the app's own clipboard, so SVG markup on the system clipboard was ignored; turning SVG
into shapes needed an imported footage file and Create Shapes from Vector Layer.
Fix: a new `edit.pasteSvg {svg, name?, comp?}` command builds a shape layer from SVG text with
the same conversion as Create Shapes from Vector Layer (paths, fills, strokes, gradients, clip
masks), above the selected layer with the SVG canvas centred in the comp, as one undo step;
oversized, non-SVG or shapeless text is rejected. In the UI, Ctrl/Cmd+V (and the native Edit ▸
Paste) run it when the system clipboard holds SVG. Copying in the app already replaces the
system clipboard with a note, so SVG there is newer than the app's clipboard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Problem: dropping a PSD/PSB file on the window imported it straight away.
The drop handler always passed `importAs` (Settings > Import > Default Drag
Import As) to `file.import`, and the Import Photoshop File form only opens
when `importAs` is missing, so the dialog that File > Import > File...
shows never appeared for drops.
Fix: a drop that includes a Photoshop file leaves `importAs` out, so the
form asks (other drops keep passing the preference). For dropped files the
form's Import Kind starts at Default Drag Import As; File > Import keeps
starting at Composition. The engine already falls back to the preference
for `drag` imports without `importAs`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Settings > Appearance > UI Scale offered only 75, 100, 125, 150, 175 and
200 %, so a size between 75 and 100 wasn't possible. It is now the shared
numeric field (Kind::Int(75, 200, "%")): type or drag any whole
percentage. The engine already stored the scale as a clamped integer and
the UI applies it with set_zoom_factor, so the range, the default, live
preview, Cancel and saved preferences are unchanged; the preset list
goes.
Numeric settings now apply a typed number once it is entered (Enter or
leaving the field), not at every keystroke: typing 85 used to apply the
partial 8, clamped to 75, and resize the whole interface before the 5.
Dragging still applies as it moves.
Tests: the UI Scale test types 85 a key at a time (nothing applies and
the field keeps the keyboard until Enter), Cancel, 50 and 300 clamp to
75 and 200, 90 with OK, and a new app with the saved preferences starts
at 90 %. The GPU Information transaction test types 125.
The stop colour now uses widgets::srgb_color_button, the After Effects-style
picker every colour input opens (#638): hex field, HSB/RGB fields, OK and
Cancel, sRGB as the project stores colours. The stop keeps its alpha.
The dialog Escape handler only stepped aside for egui popups, and this
picker isn't one, so in a modal dialog Escape with the picker open closed
the dialog too. The picker now marks the pass it was open in
(color_picker::open_recently), and the handler leaves Escape to it: Escape
restores the colour the picker opened with and closes only the picker.
Tests: ui_gradient_editor clicks inside the picker's colour field over the
modal editor, types a hex code, closes the picker by clicking outside it
and saves the stop; a new test checks that Escape and the picker's Cancel
restore the stop's colour and keep the editor and its other edits. That
test fails without the Escape change. ui_color_hex still passes.
Settings > Previews > GPU Information was fixed text ("Compositing: CPU, N
threads... Display: egui on wgpu."): it never named a GPU, even while the GPU
compositor was running, so a card looked undetected. The System Report's GPU
line only said whether the compositor started.
sysinfo::gpu_summary builds the graphics lines from the session: the compositor's
adapter, or the reason compositing is on the CPU, and the adapter the window
itself got. The dialog uses it.
This does not explain why a particular card isn't used for compositing; that
needs the reporter's System Report (Help > System Report).
Tests: engine gpu_summary_names_the_adapter_or_says_why_there_is_none and UI
gpu_information_names_the_adapter_and_why_the_gpu_is_off (fails with the old
text). The six engine tests that fail on this Windows machine (relative footage
and render-queue paths) fail on main too.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Timeline's "Edit Gradient…" on a gradient property (Gradient Fill /
Gradient Stroke ▸ Colors, Gradient Overlay) only painted its label. It now
opens a Gradient Editor (prop.editGradient): opacity stops above a preview
bar and colour stops below. Click to add a stop (it takes that track's
own value there), drag or type a Location to move it, set its opacity or
colour (egui's colour picker), Delete removes it (never the last of a
track, never while typing). The tracks stay in order while editing and the
selection follows its stop.
The editor works on a draft. OK sets the property once with prop.set at
the composition time it opened, snapped to the frame, with
timeBase: "comp" (offset and stretched layers get the key where it was
opened): one undo step, and nothing at all when the draft is unchanged, so
OK adds no keyframe. Cancel and Escape change nothing; Escape with the
picker open closes only the picker. On an animated gradient only the
keyframe at that time changes; when its stop counts no longer match a
neighbouring keyframe's (gradients only blend with equal counts) the
editor says so. The draft is saved in the typed form, so one colour stop
and each stop's RGBA survive.
prop.editGradient checks its target is a gradient property before the UI
opens anything, so agents get an error for a wrong one. New Gradient
color_at / opacity_at sample one track each (sample() multiplies opacity
in, which would apply it twice to a new stop).
Tests: ui_gradient_value (fails on main: the value had no automation id),
ui_gradient_editor (11), gradient_editor and keyframe unit tests.
Preserve legacy selection repair, modifier routing, viewer lifecycle and workspace persistence through the shared docking integration. Qualify the complete workspace gate by refreshing the 18 stale Audio Spectrum hashes for the existing linear renderer, with an independent synthetic-tone regression.
widgets::keep_focus (Project panel rename and comment, Render Queue, Essential
Graphics and Timeline fields) selected the whole text whenever it saw its field
without the keyboard focus, not just on the frame the editor opened. Anything
that took the focus for a frame (an input method, another handler) then
re-selected the name, so the arrow keys seemed to do nothing and Backspace erased
the whole name, as reported on Linux. The editor now remembers the pass it was
last shown: it selects all only when it opens and otherwise just takes the
keyboard back with the caret where it was.
The harness does not reproduce the report's Linux behaviour itself (arrows reach
the field there); the tests cover the path that did: a unit test drops the focus
for a frame and checks the caret survives (and that reopening selects all), and a
kittest renames a Project item and a Timeline layer with Left / Right / Up /
Down / End and Backspace, editing part of each name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Motion-path hits were only handled for the Selection tool, so the Pen slot's
tools did nothing on a layer's motion path, and every Pen slot tool showed the
same crosshair. As in After Effects, on a motion path:
- Add Vertex (and the Pen) add a Position keyframe at the clicked frame dot,
with the path's value there (prop.addKey), so the path keeps its shape;
- Delete Vertex removes the clicked keyframe (keys.select + keys.delete);
- Convert Vertex switches it between Linear and Auto Bezier spatial
interpolation (keys.interpolation {spatial}).
motion_path now reports its frame dots for the hit test. Over the viewer the Pen
slot tools draw their own pen glyph (Pen, Add, Delete, Convert, Mask Feather) at
the pointer in place of the system cursor, and the Pen shows Add Vertex's pen over
a mask, shape or motion path it would add a point to.
Test: ui_viewer clicks a two-key motion path with each tool and checks the added
key, its spatial interpolation both ways, its removal, and the pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
On Adreno (Windows ARM64) a failed vkAllocateMemory surfaces as an internal
ERROR_INITIALIZATION_FAILED, not out-of-memory. Gpu::within_memory only scoped
OutOfMemory, and wgpu's DeviceExt::create_buffer_init maps the new buffer at
creation and panics ("Failed to get mapped range") when the allocation failed,
taking down a frame thread. Buffers with initial contents are now created unmapped
and filled through queue.write_buffer (context::buffer_init), so a failed
allocation is only an invalid buffer and an error for the caller's scope, and
within_memory scopes Internal errors too, discarding the frame for the CPU path
as it does for out-of-memory.
The device was then lost, and egui-wgpu panicked on the main thread staging the
next frame's index buffer on the dead device. Once the host reports the
presentation device lost, the app draws nothing more (no mesh to stage), auto-saves
unsaved changes, keeps the crash-recovery marker so the next launch offers them,
and closes its window.
Tests: a device with a small buffer limit gets an over-limit and an unaligned
buffer_init without a panic and sees the error in its scope; the UI harness
reports a device loss and checks the next frame has no shapes, closes the window
and wrote the auto-save.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
With several layers selected, After Effects applies a property edit to the same property of
every selected layer; we changed only the layer whose row was edited (the Properties panel
showed only the first selected layer), so a stopwatch switched on one layer and later moves
of the others had nothing to keyframe (#355), and scaling or rotating a selection changed
one layer (#491).
- Engine: `prop.set`, `prop.toggleAnimation` and `prop.toggleKey` take `selected: true`:
the change also goes to the same property (by match path, `transform/scale`,
`effects/<effect>#n/<param>`) of every other selected, unlocked layer whose value has the
same kind, in one undo step (a scrub keeps folding into it through its `merge` key). With
`offset: true` (a scrub) each layer changes by the same amount from its own value; a typed
value sets them all. Position with Separate Dimensions is handled per layer.
- The Timeline, Properties and Effect Controls panels pass `selected` (and `offset` while a
value is dragged). The Properties panel heads "(N) Selected Objects" (zh-CN / zh-TW / ja /
uk rows).
- Viewer: a bounding-box handle drag scales every selected layer by the same ratio about its
own anchor point; the Rotation tool turns them all by the same angle (one undo step).
Tests: engine test (stopwatch, scrub offset, typed value, keyframe button, one undo step,
unselected layers untouched); kittests: the Properties panel with three layers selected
(header, stopwatch on all three undone in one step, a scrub moving all three by the same
amount) and a handle drag scaling two selected layers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
A stack (the Default workspace's right column) held one panel per frame. Dropping a panel
onto the middle or the tab strip of a stacked panel inserted a new stacked frame below it,
and dropping on its top or bottom edge split the whole column.
A stacked frame now holds tabs (`StackEntry { panels, active, open, height }`):
- Center / tab strip drops add the panel as a tab of the anchor's frame and show it.
- Top / Bottom drops add a frame of its own above / below the anchor's frame only.
(Left / Right still split the column: a frame can't hold a side-by-side split.)
- Clicking a frame's shown tab (or its header bar) expands / collapses it; another tab
shows that panel. Closing a tab keeps the frame; its last tab removes it.
- Saved workspaces from before (`{"panel": …}` per frame) still load.
Tests: dock unit tests (Center / Top / Bottom on a stack, insert_tab, close, old saved
entries); a kittest dragging Effect Controls onto Properties makes a two-tab frame whose
tabs switch the shown panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Measured against After Effects 26.3 with the original
examples/ae-spatial-tangents.jsx (three paths, ten keys, even and uneven
timing): an auto-Bezier key's out tangent is (next - previous) / 6 and
the in tangent its mirror, whatever the key times; an end key uses its
one neighbour, (neighbour - key) / 6. EffectCraft gave end keys none and
scaled middle tangents by segment length, so paths with auto-Bezier keys
ran up to 28 px from AE's. All ten tangents now match; path samples are
within 0.05 px.
Tests that relied on end keys having no tangent now expect AE's: Spatial
Bezier keeps auto keys' handles (linear keys still get a third), the
motion-path handle is drawn at a sixth, and a straight loopOut path is
compared within 1e-9. docs/fidelity records the method and scores.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shape's Fill and Stroke Color (and every other colour property) in the
Timeline only had a swatch that opens the colour picker; After Effects puts
an eyedropper next to it to sample a colour from the Composition panel.
The Timeline now shows that eyedropper (`timeline.prop.<uid>.eyedropper`),
reusing Effect Controls' viewer pick: click it, then click in the
Composition panel, and the property is set to the sampled colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
The ruler scrub set the time under the pointer and never moved the visible span, so with
the timeline zoomed in a scrub couldn't go past the edge, and a preview ran the CTI out of
view. As in After Effects:
- zoomed in, a scrub held past either end of the ruler scrolls the timeline that way,
faster the further past, with the CTI riding the edge (repainting while held);
- during playback, when the CTI leaves the visible span the view pages to start at it
(not past the comp's end).
Tests: a unit test of the paging and edge speed, and a kittest that holds a scrub past the
right end (the view scrolls, the CTI stays at the edge), then past the left end, then plays
from beyond the view (it pages to the CTI). (#468's Shift+F and black-layer items need
more information and aren't part of this.)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
In the right-hand panel stack only the tab (the name plus its padding) answered clicks, so
the rest of the header bar did nothing, a small target for short names like Audio. As in
After Effects, the rest of the strip now toggles the panel too and focuses it. A stack group
holds one panel, so the bar is unambiguous; the panel menu keeps its own click. The bar
registers the automation id `panel.header.<Panel>`.
Test: a kittest clicks near the right end of Preview's header bar (collapses), its middle
(expands) and its panel menu button (stays open).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
A split's first side was sized with `f32::clamp(20.min(avail), (avail - 20).max(0))`.
`f32::clamp` panics when its lower bound exceeds its upper one, which happened for any
split with 0 < avail < 40 pt. Dragging the viewer/Timeline divider up takes the area above
it down to 40 pt, so the splits nested there (the right column's vertical split and
others) got about 36 pt and the layout panicked; no guard covers egui's update, so the app
closed with no dialog.
The split size now goes through `split_first` / `clamp_ordered`, which never panic: when
the room is too small for both minimums the lower bound wins, and non-finite sizes fall
back to it. The gutter drag uses the same clamp.
Tests: a dock unit test lays out every workspace in rects too short and too narrow for its
minimums (it panicked before) and checks `split_first` on hostile sizes; a kittest drags the
divider above the Timeline 2000 pt up and 3000 pt down.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Cause: the Roto Brush and Refine Edge diameters live in the editor state and
the roto.options command sets them, but the UI never did: the Layer panel
only painted strokes and the bottom bar only set the view mode, so the brush
size could not be changed.
Fix, as in After Effects: Cmd-drag (Ctrl-drag on Windows and Linux) in the
Layer panel resizes the active brush (Roto Brush or Refine Edge) without
painting. The circle stays at the press point, its edge follows the pointer,
and the size is shown while dragging. The tools bar shows a Diameter field
(header.roto.diameter) while a Roto Brush tool is active. Both go through
roto.options, and the next stroke uses the new radius. Diameter is in all
four interface catalogs.
Test: roto_brush_ctrl_drag_resizes_the_brush (a 20 px Cmd/Ctrl-drag makes a
40 px brush and paints nothing, the next stroke's radius is half of it, and
the Diameter field is registered).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit b4183c28eea34ba097d7a16153b84fcf7aeea045)
Cause: Apply Color LUT's only parameter, `lut`, was ParamUi::Hidden (set only
through commands), so the effect could not be used from the UI. Effect
Controls also had no widget for any ParamUi::Text parameter (only EXtractoR's
channels had one), so Cryptomatte's Selection, the OCIO effects' config file /
file / config names and Colorama's Output Cycle could not be set either.
Fix: a new ParamUi::File { filters } for paths. Effect Controls shows the
file's name (None when empty) and a Choose... button that opens the host's
file dialog with those extensions and sets the path (prop.set, so agents use
the same command). As in After Effects, applying an effect with an empty file
parameter from the UI (Effect menu, Last Effect, drops, Effects & Presets)
opens the file dialog straight away; cancelling keeps the effect without a
file. Apply Color LUT's LUT (.cube) and the OCIO Config File (.ocio) and File
(.cube/.3dl/.csp/.cc/.ccc/.cdl/.spi1d/.spi3d/.spimtx) use it. Text
parameters get a single-line field that sets the value when it loses the
focus (Esc keeps the old text). Saved projects are upgraded on open: a
Hidden or Text parameter whose spec is now a File parameter takes the File
UI and keeps its path (effects::migrate). docs/effects.md regenerated.
This covers #473's first part (the Selection field); picking mattes in the
viewer, the layer popup from the file's metadata, the GPU path and quoted
commas are separate.
Tests: effects hidden_and_text_paths_become_file_parameters (migration); ui
file_and_text_parameters_have_widgets (the LUT is asked for on apply and
inverts red to cyan, the Choose... button picks another LUT, typing into
Cryptomatte's Selection sets it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit 403863f703999d19d3a83d9976f76bdc7577e682)
Cause: SequenceOptions::from_params defaulted `sequence` to true for
file.import, so any numbered still (IMG_0001.jpg) brought its whole numbered
run from its folder, and several picked or dropped stills with a common
prefix became one sequence. Dropped files never asked, and the Import
dialog's "<format> Sequence" checkbox started ticked.
Fix, matching After Effects: file.import takes picked and dropped files as
stills unless `sequence: true` (the Import dialog's Sequence checkbox, which
now starts unticked; Force Alphabetical Order implies it), while the numbered
stills inside a picked or dropped folder still import as sequences
(SequenceOptions::folders), and `sequence: false` (Alt-drag of a folder)
imports a folder's files one by one. Replace Footage, reload, proxies and
render outputs keep detecting their sequence (SequenceOptions::default and
from_params are unchanged), and mediaBrowser.import keeps bringing a numbered
still's run unless `sequence: false`. docs/footage.md and docs/agents.md
describe the new defaults.
Tests: sequence import_takes_stills_unless_asked_for_a_sequence and engine
numbered_stills_import_as_stills_by_default (one dropped still and two picked
IMG_ stills stay stills, a dropped folder makes one sequence, the checkbox
brings the run); the existing sequence tests pass `sequence: true`; ui
import_dialog_offers_the_image_sequence_option (unticked by default: a still;
ticked: the run) and a_dropped_folder_imports_as_one_sequence_with_sequence_interpretation
(two dropped frames: two stills; the folder: one sequence).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit aa3c31db9ab3a774ee2f8ba867e1bafc1fce7aba)
The cache bars count the frames of `shown_series`, which rebuilds the
series from the frame key's scale in thousandths (333 -> 0.333). The key's
`opts` hashed the render options with the f64 scale, and the frames had been
rendered at 0.3333..., so the series never matched and the bars stayed empty
at Third (and any resolution that isn't a whole number of thousandths, such
as Custom 1/7).
`opts_hash` now hashes the scale rounded to the key's thousandths, which the
key carries anyway.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Window > Workspace > Save as New Workspace and Save Changes to this
Workspace kept the layout only in memory (`UiState::saved_workspaces` /
`saved_floating`): nothing wrote them, so they were gone after a restart.
They are now written to `workspaces.json` in the settings store (the config
folder on desktop, OPFS on the web) when a workspace is saved, renamed or
deleted, and read back when the app starts; a file that doesn't read is
ignored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
egui turns Ctrl/Cmd+wheel and a pinch into a zoom factor (zoom_delta)
rather than a scroll, and the Timeline only zoomed on Alt+wheel, so
both did nothing over the layers. They now zoom time around the
pointer, like Alt+wheel. (B stays Set Work Area Start as in After
Effects; Split Layer is Ctrl/Cmd+Shift+D.)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
tylerjenningsw