Se agrega la configuracion led por matriz.

config.h

@@ -28,18 +28,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 200
 #define TAPPING_TOGGLE 2
 
-#define RGBLIGHT_LAYERS
-// #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
-// #define SPLIT_LAYER_STATE_ENABLE
-
 #ifdef RGBLIGHT_ENABLE
-    #define RGBLIGHT_EFFECT_BREATHING
-    #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+    // #define RGBLIGHT_LAYERS
+    // #define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
+    // #define RGBLIGHT_EFFECT_BREATHING
+    // #define RGBLIGHT_EFFECT_RAINBOW_MOOD
     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-    #define RGBLIGHT_EFFECT_SNAKE
-    #define RGBLIGHT_EFFECT_KNIGHT
-    #define RGBLIGHT_EFFECT_CHRISTMAS
-    #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+    // #define RGBLIGHT_EFFECT_SNAKE
+    // #define RGBLIGHT_EFFECT_KNIGHT
+    // #define RGBLIGHT_EFFECT_CHRISTMAS
+    // #define RGBLIGHT_EFFECT_STATIC_GRADIENT
     // #define RGBLIGHT_EFFECT_RGB_TEST
     // #define RGBLIGHT_EFFECT_ALTERNATING
     // #define RGBLIGHT_EFFECT_TWINKLE
@@ -49,4 +47,72 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGBLIGHT_VAL_STEP 17
 #endif
 
+#ifdef RGB_MATRIX_ENABLE
+#   define SPLIT_LED_STATE_ENABLE
+#   define SPLIT_LAYER_STATE_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+// #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 8
+#    define RGB_MATRIX_SPD_STEP 10
+
+/* Enable the animations you want/need.  You may need to enable only a small number of these because       *
+ * they take up a lot of space.  Enable and confirm that you can still successfully compile your firmware. */
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+// #    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+// #    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+// #    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+// #    define ENABLE_RGB_MATRIX_BREATHING
+// #    define ENABLE_RGB_MATRIX_BAND_SAT
+// #    define ENABLE_RGB_MATRIX_BAND_VAL
+// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+// #    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+// #    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+// #    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+// #    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+// #    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+// #    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+// #    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+// #    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+// #    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+// #    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #    define ENABLE_RGB_MATRIX_HUE_BREATHING
+// #    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+// #    define ENABLE_RGB_MATRIX_HUE_WAVE
+//// #    define ENABLE_RGB_MATRIX_PIXEL_RAIN
+//// #    define ENABLE_RGB_MATRIX_PIXEL_FLOW
+//// #    define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+// #    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+// #    define ENABLE_RGB_MATRIX_SPLASH
+// #    define ENABLE_RGB_MATRIX_MULTISPLASH
+// #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+// #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif
+
 #define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

keymap.c

@@ -161,9 +161,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      RGB_HUD, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD, RGB_MOD,                     RGB_VAD, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, RGB_M_SW,
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD, RGB_MOD,                     RGB_VAD, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, XXXXXXX, RGB_M_P,
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
                                           TT(4),  XXXXXXX,  KC_SPC,     KC_SPC, RGB_TOG, XXXXXXX
                                       //`--------------------------'  `--------------------------'
@@ -279,55 +279,26 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 #endif // OLED_ENABLE
 
 // RGB LAYER CONFIGURATION
-// LENGHTH OF LEDS
-const int firstLed = 1;
-const int lastLed = 53;
-
-// Light LEDs when caps lock is active. Hard to ignore!
-const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
-    { lastLed, 1, HSV_RED }, // Light last LEDs only
-    { firstLed, 1, HSV_RED } // Light first LEDs only 
-);
-// Light LEDs layer 1 is active
-const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
-    {firstLed, lastLed, HSV_CYAN }
-);
-// Light LEDs layer 2 is active
-const rgblight_segment_t PROGMEM my_layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS(
-    {firstLed, lastLed, HSV_YELLOW }
-);
-// Light LEDs layer 3 is active
-const rgblight_segment_t PROGMEM my_layer3_layer[] = RGBLIGHT_LAYER_SEGMENTS(
-    {firstLed, lastLed, HSV_SPRINGGREEN}
-);
-
-// Now define the array of layers. Later layers take precedence
-const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
-    my_capslock_layer,  // Overrides caps lock and Windos layer 
-    my_layer1_layer,    // Overrides other layers
-    my_layer2_layer,    // Overrides other layers
-    my_layer3_layer     // Overrides other layers
-);
-
-void keyboard_post_init_user(void) {
-    // Enable the LED layers
-    rgblight_layers = my_rgb_layers;
+void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
+    for (uint8_t i = led_min; i <= led_max; i++) {
+        switch(get_highest_layer(layer_state|default_layer_state)) {
+          case 1:
+            rgb_matrix_set_color(i, RGB_GREEN);
+            break;
+          case 2:
+            rgb_matrix_set_color(i, RGB_RED);
+            break;
+          case 3:
+            rgb_matrix_set_color(i, RGB_BLUE);
+            break;
+          default:
+            if (isWindows == false){
+              rgb_matrix_set_color(26, RGB_RED);
             }
-
-// enabling disabling layers
-bool led_update_user(led_t led_state) {
-    rgblight_set_layer_state(0, led_state.caps_lock);
-    return true;
+            if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+              rgb_matrix_set_color(53, RGB_RED);
+            }
+            break;
         }
-
-layer_state_t default_layer_state_set_user(layer_state_t state) {
-    rgblight_set_layer_state(0, layer_state_cmp(state, 0));
-    return state;
     }
-
-  layer_state_t layer_state_set_user(layer_state_t state) {
-    rgblight_set_layer_state(1, layer_state_cmp(state, 1));
-    rgblight_set_layer_state(2, layer_state_cmp(state, 2));
-    rgblight_set_layer_state(3, layer_state_cmp(state, 3));
-    return state;
 }

rules.mk

@@ -1,5 +1,6 @@
 MOUSEKEY_ENABLE = no     # Mouse keys
-RGBLIGHT_ENABLE = yes    # Enable WS2812 RGB underlight.
+RGBLIGHT_ENABLE = no    # Enable WS2812 RGB underlight.
+RGB_MATRIX_ENABLE = yes
 #VIA_ENABLE      = yes    # Enable VIA
 OLED_ENABLE     = yes
 OLED_DRIVER     = SSD1306

version.txt

@@ -1 +1 @@
-2.1.0
+3.0.0