Compare commits

..
31 Commits
Author SHA1 Message Date
Tanish Manku e1a048ba42 Stack d1: #2152: -ATTEDIT Position keeps aligned and fit text's baseline
Position set both points of a justified attribute to the pick, which left
aligned and fit text no direction or length. Both points now move by the
same offset, from the point the text is placed by.
2026-11-19 15:14:28 -07:00
Tanish Manku b713869cec Stack d1: #2368: put first_center's doc comment back on it 2026-11-19 15:14:28 -07:00
Tanish Manku bdc0c7b2a7 Stack d1: #2368: ARRAYEDIT puts a center given with a new base point where asked
center was read in the array's placement from before base or keyPoint moved
its insertion point, so the centre landed off by that move.
2026-11-19 15:14:28 -07:00
Tanish Manku bd7d94c8ea Stack d1: #2368: refuse a key point search over more than 10,000 objects
The search took the first 10,000 objects and could miss a nearer key point
on a later one; now it says so and asks for a point.
2026-11-19 15:14:28 -07:00
Tanish Manku c6e80bea8f Stack d1: #2368: refuse a keyPoint that isn't a point
A keyPoint that couldn't be read was taken as none, so ARRAYRECT,
ARRAYPOLAR and ARRAYEDIT went on with another base point.
2026-11-19 15:14:28 -07:00
Alex Ortiz 22226a08ad -ATTEDIT: Position, Height, Angle and Style one at a time (#2152)
The -ATTEDIT part of 6a86919f from #2152; its -RENAME VPort part is left
out for #2907.
2026-11-19 14:48:28 -07:00
Tanish Manku 7060a86ea6 Merge #2368: Array base points: the Key point option in ARRAYRECT, ARRAYPOLAR and ARRAYEDIT (F5) 2026-11-19 14:47:28 -07:00
Tanish Manku c4fd42bc0b Merge #2915: -LAYER stAte: save, restore, edit, rename, delete and list layer states 2026-11-19 14:46:56 -07:00
Tanish Manku 75e737e2f3 Merge #2907: -RENAME: viewport configurations, and AutoCAD's messages 2026-11-19 14:46:17 -07:00
2ez4gcxandClaude Opus 5.5 685e364381 Prompt: declare NO_OR as a slice; test the states prompt's text
This PR and #2726 each add a prompt to NO_OR and raise its array length
from 28 to 29, so with both merged the array holds 30 entries under a
length of 29 (E0308), whichever lands first. A slice has no length to
keep in step; both PRs make the same change to this line.

No test noticed "Enter states to change" missing from NO_OR, so the Esc
test now checks the toggles prompt as AutoCAD 2024 writes it, without
"or" before the keywords.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 09:29:04 +07:00
2ez4gcxandClaude Opus 5.5 2f3368f400 Merge feat/acad-layer-states, now with main fbb08380
Brings in #2910's merge of main fbb08380, which also changes that branch's
layer state reader and writer to import Tag from craft_dxf (main #3040
replaced cadcraft-dxf with craft-dxf). This merge is clean: the tree is
#2910's plus exactly this branch's own changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 11:34:01 +07:00
2ez4gcxandClaude Opus 5.5 1a918ff740 Merge main into feat/acad-layer-states
Brings the branch up to main fbb08380. The merge has no conflicts, but
since #3040 the DXF tag crate is craft-dxf from craft-libs, so the layer
state reader and writer this branch adds imports Tag from craft_dxf
instead of the removed cadcraft_dxf. Without that the merged crate doesn't
compile.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-14 11:08:27 +07:00
2ez4gcxandClaude Opus 5.5 7616ff63ea Merge main into fix/rename-vport-messages
Brings the branch up to main 6d744887, which has #2954's fix for
mtext::tests::strips_formatting, so the gate runs on a main that passes.
No conflicts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 14:06:45 +07:00
2ez4gcxandClaude Opus 5.5 9def40d174 Merge feat/acad-layer-states, now with main
Brings in #2910's merge of main 6d744887 (with #2954's fix for
mtext::tests::strips_formatting), whose dxf_raw.rs conflict is resolved
there. This merge is clean: the tree is #2910's plus exactly this branch's
own changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 11:58:51 +07:00
2ez4gcxandClaude Opus 5.5 8f039dc3fa Merge main into feat/acad-layer-states
Brings the branch up to main 6d744887, which has #2954's fix for
mtext::tests::strips_formatting. The one conflict is in
crates/io/src/dxf_raw.rs: main moved the extension-dictionary liveness test
inside its hard-owner settle passes, and this branch keeps a merged LAYER
extension dictionary's objects live there. The check now sits inside main's
closure, unchanged otherwise.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 11:22:48 +07:00
2ez4gcxandClaude Opus 5.5 2206a861f2 Merge #2910's case-folded layer state entries; fix a test comment
Brings in feat/acad-layer-states: entries of AutoCAD's dictionary whose
names differ only in case are read as one state, as AutoCAD 2024 opens them.
The JSON lookup test's comment now says where two such names can come from:
CADCraft's own record keeps the second, which AutoCAD doesn't see.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 08:31:28 +07:00
2ez4gcxandClaude Opus 5.5 cd9f8b1dd3 Layer states: entries in another case are one state, as in AutoCAD 2024
AutoCAD 2024 opens the entries S and s of one ACAD_LAYERSTATES dictionary as
a single state, named as the first entry in the dictionary and holding the
last entry's record (measured with both dictionary orders). The reader kept
two states, so a save moved the second to CADCraft's record and AutoCAD then
restored the other record than before. It now reads them as AutoCAD does;
CADCraft's own record still keeps a second spelling it wrote itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 08:20:19 +07:00
2ez4gcxandClaude Opus 5.5 b3fbfa0a3c Merge #2910's layer state reader bound; layerstate.save checks names
Brings in feat/acad-layer-states (b9d74f8f): a state holds each layer once,
a repeated entry applying over the earlier one, and copies of layers into
states share a per-file budget.

After review: the JSON layerstate.save refuses a name valid_name refuses
(empty, over 255 characters, a control character or one AutoCAD refuses),
as -LAYER stAte Save and layerstate.rename already did.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 04:32:56 +07:00
2ez4gcxandClaude Opus 5.5 10aa4e18f7 -RENAME VPort tests: *Invalid*, Enter, and the JSON form's refusals
After review: the viewport configuration test checks that "*Invalid*"
follows only a name already used, that Enter as the new name is refused,
the measured cfg1 typed for CFG1 to cfg1 row (it was run without an
assertion), and the JSON form's refusal of a name already used or invalid
and its case-only rename.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:53:36 +07:00
2ez4gcxandClaude Opus 5.5 b9d74f8feb Layer states: each layer once per state, and a bound on copied layers
Each entry of a state copied the drawing's layer, so a small file naming one
layer with a long description in many entries could take gigabytes. A state
now holds each LAYER handle once; a repeated entry applies over the earlier
one, which gives what restoring both in turn did, and AutoCAD 2024 restores
the later of two full entries (measured). New copies are charged to one
per-file budget of 256 MiB, as image-definition strings are; past it the
remaining entries are left out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 03:53:09 +07:00
2ez4gcxandClaude Opus 5.5 2cb1fcd060 Layer states: layerstate.save replaces only the state the lookups reach
f8be7d83 replaced every state whose name matched without regard to case,
so in a file holding both M2 and m2 (one AutoCAD 2024 opens), saving m2
dropped M2 too. Save now replaces the state Restore and Delete reach (the
same spelling, else another case) and leaves the other one, as AutoCAD,
which refuses the save, leaves both.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 00:14:05 +07:00
2ez4gcxandClaude Opus 5.5 f8be7d8339 Layer states: layerstate.save replaces a state named in another case
This PR makes layerstate.restore, rename and delete find a state's name
without regard to case, as AutoCAD 2024 does, but layerstate.save still
replaced only a state of the same spelling, so saving s1 next to S1 made
a second state that the lookups then had to choose between. AutoCAD
keeps one state per name in any case: its -LAYER stAte Save and
layerstate-save refuse s1 after S1 and keep S1 (measured; layerstate-has
"s1" is T). -LAYER stAte Save here already refuses; the JSON command now
replaces a state whose name differs only in case, as it replaces one of
the same spelling.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 22:47:03 +07:00
2ez4gcxandClaude Opus 5.5 60fc6e7b40 Merge feat/acad-layer-states: a frozen current layer without an entry stays frozen
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:43:25 +07:00
2ez4gcxandClaude Opus 5.5 38cab40e46 Layer state restore: a frozen current layer without an entry stays frozen
A state whose current layer (302) is frozen in the drawing made it current
whenever the mask had Frozen, even with no entry of its own to thaw it,
leaving a frozen current layer. AutoCAD 2024 keeps the current layer then
(measured: 302 = frozen B, mask 2047, no entry for B, A current -> A stays
current, B stays frozen, the other entries are restored; with an entry B
becomes current and thaws). It now takes Frozen in the mask and an entry
for that layer, matched without case as the per-layer restore matches.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:09:52 +07:00
2ez4gcxandClaude Opus 5.5 7997db2fd0 Merge feat/acad-layer-states: the layer state tests added for review on #2910
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:07:04 +07:00
2ez4gcxandClaude Opus 5.5 bcb6d6ac51 Layer states: tests for each mask bit, old records, the limit and dangling entries
- Restore: one state per remaining mask bit (Plot, VP freeze new, Linetype,
  Lineweight, Plot style, Transparency) restores only its property.
- A state of CADCraft's own record from before masks (JSON with only the
  name and the layers) reads as mask 2047, no current layer, no description.
- 100 001 states in AutoCAD's dictionary: the last one in the file is left
  out and the others come in file order.
- The LAYER table's kept extension dictionary with entries pointing at a
  handle of nothing and at 0: neither is written.
- States named "" and " " stay in CADCraft's record.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 10:36:45 +07:00
2ez4gcxandClaude Opus 5.5 50555a9110 -LAYER stAte: save, restore, edit, rename, delete and list layer states
-LAYER stAte printed "not available yet". It now runs the layer state
options with AutoCAD 2024's prompts and messages (measured with
accoreconsole): Save lists the ten "Enter states to change" toggles and
remembers them for the next Save; Edit sets a state's own mask and keeps
bits no toggle reaches; Name and Save refuse names a state has in any
case and the characters layer names refuse; unknown names re-prompt;
`?` lists names without regard to case. Import and EXport stay "not
available yet".

The layerstate.* commands find names as spelled, else in another case,
and layerstate.save takes an optional mask.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 04:03:26 +07:00
2ez4gcxandClaude Opus 5.5 5420dea6c1 -RENAME: compare the new name with the stored one; refuse layer 0 and Continuous
The old name is now kept as the drawing spells it, so a new name in another
case than that is a rename even when it is the old name as typed: AutoCAD 2024
renames viewport configuration CFG1 typed cfg1 to cfg1, and leaves it for
cfg1 to CFG1 (measured; the same for layers).

At the old-name prompt AutoCAD 2024 ends the command on names it won't
rename (measured): layer 0 and linetype Continuous ("Cannot rename ..." and
*Invalid*), linetypes ByLayer and ByBlock and block names starting with "*"
such as *Model_Space or an anonymous *U0 ("Invalid ... name.").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 00:13:16 +07:00
2ez4gcxandClaude Opus 5.5 9ed3607b72 DXF/DWG: layer states in AutoCAD's form, restored by mask and current layer
CADCraft kept saved layer states only in its own CADCRAFT_LAYERSTATES record,
so AutoCAD 2024 listed none of them ("Unknown layer state name.") and
CADCraft read none of AutoCAD's ACAD_LAYERSTATES ("No saved layer states.").

States now go into the LAYER table's extension dictionary, ACAD_LAYERSTATES,
one XRECORD each, in the layout AutoCAD 2024 writes (measured): mask, current
layer, and per layer its handle, flags, colour (92 for a true colour),
lineweight, linetype, plot style (Color_N, or the placeholder handle with
named plot styles), transparency, and 93 on an xref's layer. View layer
snapshots and names repeated in another case stay in CADCraft's record.
Reading takes AutoCAD's states, then CADCraft's own. A kept LAYER table
dictionary (layer filters) joins the one written for the states.

layerstate.restore now does what AutoCAD does: the state's current layer
first (unless left frozen), only the masked properties, never freezing the
current layer; layerstate.save records the current layer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 23:47:19 +07:00
2ez4gcxandClaude Opus 5.5 38f51899fc -RENAME: viewport configurations, and AutoCAD's messages
-RENAME's VPort option printed "not available yet". It now renames a saved
viewport configuration, every tile of it (never *Active), as AutoCAD 2024
does; the JSON form takes table "vport".

-RENAME also answers a name it can't take as AutoCAD 2024 does (measured
for blocks, dimension styles, layers, linetypes, text styles, UCSs, views
and viewport configurations), ending the command instead of asking again:
"Cannot find layer "X".", "A layer named "X" already exists." then
"*Invalid*", "Invalid layer name." (also for no name at all). A UCS is
"ucs" in the prompts and in "A ucs named", "UCS" in the other two.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 21:38:04 +07:00
Francesco BVandClaude Opus 5.5 b600293cfa arrays: the Key point option of a base point (F5)
ARRAYRECT, ARRAYPOLAR and ARRAYEDIT (Base point and REPlace) offered Key
point but only said it was not available. It now asks for a key point on
the source (or replacement) objects and takes their key point nearest the
pick (an end point, midpoint, centre, quadrant, vertex or insertion point)
as the base point; in ARRAYEDIT the source objects are searched as placed
at the item picked. The JSON forms take `keyPoint`.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-27 22:42:36 +01:00
49 changed files with 2568 additions and 758 deletions
+4 -45
View File
@@ -233,38 +233,11 @@ fn saved_window(app_ron: &str) -> bool {
ron::from_str::<std::collections::HashMap<String, String>>(app_ron).is_ok_and(|kv| kv.contains_key(WINDOW_KEY))
}
/// The window state from the last session is saved and will be restored (#2595). A saved size
/// below the minimum (seen on Windows: 64×64 points, which eframe restores un-maximized and
/// unusable) is dropped first, so the window opens at its default size.
/// The window state from the last session is saved and will be restored (#2595).
fn restores_window() -> bool {
let Some(path) = eframe::storage_dir(APP_ID).map(|dir| dir.join("app.ron")) else { return false };
let Ok(mut ron) = std::fs::read_to_string(&path) else { return false };
if let Some(fixed) = without_tiny_window(&ron)
&& std::fs::write(&path, &fixed).is_ok()
{
ron = fixed;
}
saved_window(&ron)
eframe::storage_dir(APP_ID).and_then(|dir| std::fs::read_to_string(dir.join("app.ron")).ok()).is_some_and(|ron| saved_window(&ron))
}
/// `app_ron` without its window entry when that entry's inner size is below `MIN_INNER_SIZE`;
/// `None` when there is nothing to drop (no entry, a usable size, or an unreadable file).
fn without_tiny_window(app_ron: &str) -> Option<String> {
let mut kv = ron::from_str::<std::collections::BTreeMap<String, String>>(app_ron).ok()?;
let w = kv.get(WINDOW_KEY)?;
let size = &w[w.find("inner_size_points:")?..];
let num = |k: &str| size[size.find(k)? + k.len()..].split([',', ')']).next()?.trim().parse::<f32>().ok();
let (x, y) = (num("x:")?, num("y:")?);
if x >= MIN_INNER_SIZE[0] && y >= MIN_INNER_SIZE[1] {
return None;
}
kv.remove(WINDOW_KEY);
ron::ser::to_string_pretty(&kv, ron::ser::PrettyConfig::default()).ok()
}
/// The smallest main window, in points.
const MIN_INNER_SIZE: [f32; 2] = [900.0, 560.0];
/// The main window: its size, title bar, placement and rendering needs. `restoring`: a window state
/// saved by the last session is restored instead of opening centred.
fn window_options(restoring: bool) -> eframe::NativeOptions {
@@ -272,7 +245,7 @@ fn window_options(restoring: bool) -> eframe::NativeOptions {
viewport: egui::ViewportBuilder::default()
.with_title("CADCraft")
.with_inner_size([1600.0, 1000.0])
.with_min_inner_size(MIN_INNER_SIZE)
.with_min_inner_size([900.0, 560.0])
.with_drag_and_drop(true)
.with_fullsize_content_view(true)
.with_titlebar_shown(false)
@@ -430,9 +403,6 @@ fn main() -> eframe::Result {
app.ui = ui;
}
app.set_system_cursor_default(vars.system_cursor == Switch::On);
// macOS: CADCRAFT_NO_NATIVE_MENU=1 keeps the menus inside the window.
#[cfg(target_os = "macos")]
app.set_native_menus(vars.no_native_menu != Switch::On);
if let Some(error) = &workspace_error {
eprintln!("CADCraft workspace: {error}");
app.set_status(error);
@@ -511,7 +481,7 @@ fn main() -> eframe::Result {
#[cfg(test)]
mod tests {
use super::{filters_for_save, follow_desktop, saved_window, window_options, without_tiny_window};
use super::{filters_for_save, follow_desktop, saved_window, window_options};
#[test]
fn save_dialog_offers_dwg_with_the_drawing_format_first() {
@@ -555,17 +525,6 @@ mod tests {
assert!(!saved_window("not ron at all"));
}
/// A saved 64×64 window (below the minimum) is dropped; a usable one is kept.
#[test]
fn a_tiny_saved_window_is_dropped() {
let tiny = r#"{"window": "(normal_geometry:(outer_position_pixels:Some((x:0.0,y:0.0)),scale_factor:1.25,inner_size_points:(x:64.0,y:64.0)),fullscreen:false,maximized:true)", "cadcraft.prefs": "{}"}"#;
let fixed = without_tiny_window(tiny).expect("dropped");
assert!(!saved_window(&fixed) && fixed.contains("cadcraft.prefs"));
let ok = tiny.replace("x:64.0,y:64.0)),", "x:1600.0,y:1000.0)),");
assert_eq!(without_tiny_window(&ok), None);
assert_eq!(without_tiny_window("not ron"), None);
}
/// View ▸ Theme ▸ System on Linux: winit reports no theme, so the desktop's answer stands in;
/// without one (or where winit answers and the desktop doesn't) the input is left alone.
#[test]
+39 -1
View File
@@ -931,11 +931,49 @@ pub struct Ucs {
pub y_axis: Vec3,
}
/// A saved layer state (LAYERSTATE).
/// A saved layer state (LAYERSTATE), as AutoCAD keeps one in the LAYER table's
/// `ACAD_LAYERSTATES` dictionary.
#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
#[serde(default)]
pub struct LayerState {
pub name: String,
pub layers: Vec<Layer>,
/// The properties restoring sets ([`LayerState::ON`] …): AutoCAD's mask (group 91 of the
/// state's XRECORD). Bits CADCraft doesn't use are kept as read.
pub mask: u32,
/// The layer restoring makes current; empty, or a layer the drawing doesn't have, leaves the
/// current layer as it is (AutoCAD 2024, measured).
pub current: String,
/// Group 301 of the state's XRECORD: empty as AutoCAD 2024's -LAYER saves a state; a text a
/// file holds there is kept.
pub description: String,
}
impl Default for LayerState {
fn default() -> Self {
LayerState { name: String::new(), layers: Vec::new(), mask: LayerState::ALL, current: String::new(), description: String::new() }
}
}
impl LayerState {
pub const ON: u32 = 1;
pub const FROZEN: u32 = 2;
pub const LOCKED: u32 = 4;
pub const PLOT: u32 = 8;
pub const VP_FREEZE_NEW: u32 = 16;
pub const COLOR: u32 = 32;
pub const LINETYPE: u32 = 64;
pub const LINEWEIGHT: u32 = 128;
pub const PLOT_STYLE: u32 = 256;
pub const TRANSPARENCY: u32 = 1024;
/// Every property: the mask of AutoCAD 2024's -LAYER stAte Save with its defaults (2047; bit
/// 512, which no property toggles, is always set).
pub const ALL: u32 = 2047;
/// A state of every property of `layers`, with `current` the layer restoring makes current.
pub fn new(name: impl Into<String>, layers: Vec<Layer>, current: impl Into<String>) -> Self {
LayerState { name: name.into(), layers, current: current.into(), ..LayerState::default() }
}
}
/// A named group of entities (GROUP).
-2
View File
@@ -22,7 +22,6 @@ pub(crate) mod groups;
pub(crate) mod hatch;
mod image;
mod inquiry;
pub mod interface;
mod layer;
mod layout;
mod lisp;
@@ -213,7 +212,6 @@ pub fn command_specs() -> &'static [CommandSpec] {
v.extend(inquiry::specs());
v.extend(settings::specs());
v.extend(options::specs());
v.extend(interface::specs());
v.extend(utility::specs());
v.extend(table::specs());
v.extend(tolerance::specs());
+72 -12
View File
@@ -27,6 +27,10 @@ mod edit;
/// Most preview entities drawn while the array is edited.
const PREVIEW_LIMIT: usize = 2000;
/// Most objects whose key points are searched for a Key point base point.
const MAX_KEY_OBJECTS: usize = 10_000;
/// The prompt after the Key point option of a base point.
const KEY_POINT_PROMPT: &str = "Specify key point on source objects to use as base point";
/// Keyword-only prompts: each typed token is matched on its own (no free text).
const KEYWORDS: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
@@ -41,13 +45,13 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("arrayrect", "Rectangular Array", run_arrayrect)
.menu(&["Modify", "Array", "Rectangular Array"])
.params(
"{handles?, rows, cols, rowSpacing, colSpacing, levels? (1), levelSpacing?, rowElevation?, axisAngle? (degrees), base? ([x, y], default the objects' centre), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
"{handles?, rows, cols, rowSpacing, colSpacing, levels? (1), levelSpacing?, rowElevation?, axisAngle? (degrees), base? ([x, y], default the objects' centre), keyPoint? ([x, y]: the base point is the objects' key point nearest it), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
)
.interactive(|_| Ok(Box::new(RectM::default()))),
CommandSpec::new("arraypolar", "Polar Array", run_arraypolar)
.menu(&["Modify", "Array", "Polar Array"])
.params(
"{handles?, center, count, angle? (degrees, default 360), rotate?: bool, rows? (1), rowSpacing?, rowElevation?, levels? (1), levelSpacing?, base? ([x, y], default the first object's centre), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
"{handles?, center, count, angle? (degrees, default 360), rotate?: bool, rows? (1), rowSpacing?, rowElevation?, levels? (1), levelSpacing?, base? ([x, y], default the first object's centre), keyPoint? ([x, y]: the base point is the objects' key point nearest it), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
)
.interactive(|_| Ok(Box::new(PolarM::default()))),
CommandSpec::new("-array", "Array", classic::run_classic)
@@ -246,6 +250,45 @@ fn bounds(d: &Drawing, hs: &[Handle]) -> Bounds2 {
hs.iter().filter_map(|h| d.entity(*h).map(|e| cadcraft_doc::entity_bounds(d, e, 0))).fold(Bounds2::EMPTY, |a, b| a.union(&b))
}
/// The key point of `ents`, placed by `m`, nearest `at`: one of their grips (end points,
/// midpoints, centres, vertices, insertion points). `None` when they have none. More than
/// [`MAX_KEY_OBJECTS`] objects are refused: searching only some could miss the nearest one.
pub(crate) fn nearest_key_point<'a>(ents: impl Iterator<Item = &'a Entity>, m: &Mat3, at: Vec2) -> Result<Option<Vec2>> {
if !at.is_finite() {
return Ok(None);
}
let mut best: Option<(Vec2, f64)> = None;
for (n, e) in ents.enumerate() {
if n >= MAX_KEY_OBJECTS {
return Err(other(format!("Too many objects to search for a key point (at most {MAX_KEY_OBJECTS}); specify a point.")));
}
let mut k = e.kind.clone();
k.transform(m);
for g in k.grips().into_iter().filter(|g| g.is_finite()) {
let d = g.dist(at);
if best.is_none_or(|(_, bd)| d < bd) {
best = Some((g, d));
}
}
}
Ok(best.map(|b| b.0))
}
/// `keyPoint` of a JSON form: absent or null is none; anything else must be a point, rather than
/// be taken as none and the base point found another way.
pub(crate) fn key_point_param(cmd: &str, p: &Value) -> Result<Option<Vec2>> {
match p.get("keyPoint") {
None | Some(Value::Null) => Ok(None),
Some(_) => point_param(p, "keyPoint").map(Some).ok_or_else(|| bad(cmd, "`keyPoint` must be a point [x, y]")),
}
}
/// The key point of objects `hs` in the drawing nearest `at`.
pub(crate) fn key_point_of(d: &Drawing, hs: &[Handle], at: Vec2) -> Result<Vec2> {
nearest_key_point(hs.iter().filter_map(|h| d.entity(*h)).map(|e| &**e), &Mat3::IDENTITY, at)?
.ok_or_else(|| other("The objects have no key point; specify a point."))
}
/// The centre of the first object (the point a non-rotated polar copy is moved by).
fn first_center(d: &Drawing, hs: &[Handle]) -> Option<Vec2> {
hs.first().and_then(|h| d.entity(*h)).map(|e| cadcraft_doc::entity_bounds(d, e, 0).center()).filter(|c| c.is_finite())
@@ -386,9 +429,10 @@ fn run_arrayrect(s: &mut Session, p: &Value) -> Result<Value> {
row_elevation: f64_or(p, "rowElevation", 0.0),
});
let rs = f64_or(p, "rowSpacing", 1.0);
let base = match point_param(p, "base") {
Some(b) => b,
None => Some(bounds(s.doc()?, &hs).center()).filter(|c| c.is_finite()).unwrap_or_default(),
let base = match (key_point_param("arrayrect", p)?, point_param(p, "base")) {
(Some(k), _) => key_point_of(s.doc()?, &hs, k)?,
(None, Some(b)) => b,
(None, None) => Some(bounds(s.doc()?, &hs).center()).filter(|c| c.is_finite()).unwrap_or_default(),
};
let p2 = params(kind, levels, f64_or(p, "levelSpacing", rs));
let associative = bool_or(p, "associative", assoc_default(s));
@@ -402,7 +446,10 @@ fn run_arraypolar(s: &mut Session, p: &Value) -> Result<Value> {
let rows = count_or("arraypolar", p, "rows", 1)?;
let levels = count_or("arraypolar", p, "levels", 1)?;
check_size(s, n.saturating_mul(rows).saturating_mul(levels), hs.len())?;
let base = point_param(p, "base").or_else(|| s.doc().ok().and_then(|d| first_center(d, &hs))).unwrap_or(c);
let base = match key_point_param("arraypolar", p)? {
Some(k) => key_point_of(s.doc()?, &hs, k)?,
None => point_param(p, "base").or_else(|| s.doc().ok().and_then(|d| first_center(d, &hs))).unwrap_or(c),
};
let row_spacing = f64_or(p, "rowSpacing", 1.0);
let fill = f64_or(p, "angle", 360.0);
if !(fill.abs() >= 1e-9 && fill.abs() <= 360.0 + 1e-9) {
@@ -503,6 +550,8 @@ enum RStage {
Main,
Assoc,
Base,
/// Base point: Key point (a grip of the source objects).
BaseKey,
/// COUnt: columns, then rows.
CountCols,
CountRows,
@@ -663,6 +712,7 @@ impl Interactive for RectM {
.default("eXit"),
Assoc => assoc_prompt(self.assoc),
Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
CountCols | ColsCount => cols(),
CountRows | RowsCount => rows(),
SpaceCols => dist("Specify the distance between columns", self.cs).kw(&["Unit cell"]),
@@ -712,10 +762,12 @@ impl Interactive for RectM {
self.base = self.centroid;
Main
}
(Base, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
Base
(Base, Input::Keyword(_)) => BaseKey,
(BaseKey, Input::Point(p)) => {
self.base = key_point_of(s.doc()?, &self.objs, *p)?;
Main
}
(BaseKey, Input::Enter) => Base,
(CountCols | ColsCount, _) => match count(&i, self.cols, max_count(s, self.rows.saturating_mul(self.levels), n))? {
Some(c) => {
self.cols = c;
@@ -858,6 +910,9 @@ enum PStage {
Main,
Assoc,
Base,
/// Key point of the base point asked from the center prompt, or from the main prompt.
CenterBaseKey,
BaseKey,
Items,
Between,
Fill,
@@ -1034,6 +1089,7 @@ impl Interactive for PolarM {
match self.stage {
Center => Prompt::new("Specify center point of array", Accept::POINT).kw(&["Base point", "Axis of rotation"]),
CenterBase | Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
CenterBaseKey | BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
Main => Prompt::new("Select grip to edit array", Accept::POINT)
.kw(&["ASsociative", "Base point", "Items", "Angle between", "Fill angle", "ROWs", "Levels", "ROTate items", "eXit"])
.default("eXit"),
@@ -1092,10 +1148,14 @@ impl Interactive for PolarM {
self.base = None;
if stage == CenterBase { Center } else { Main }
}
(CenterBase | Base, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
stage
(CenterBase, Input::Keyword(_)) => CenterBaseKey,
(Base, Input::Keyword(_)) => BaseKey,
(CenterBaseKey | BaseKey, Input::Point(p)) => {
self.base = Some(key_point_of(s.doc()?, &self.objs, *p)?);
if stage == CenterBaseKey { Center } else { Main }
}
(CenterBaseKey, Input::Enter) => CenterBase,
(BaseKey, Input::Enter) => Base,
(Items, _) => match count(&i, self.items, max_count(s, self.rows.saturating_mul(self.levels), n))? {
Some(c) => {
self.items = c;
+49 -10
View File
@@ -18,7 +18,9 @@ use super::super::helpers::v3;
use super::super::machines::{SelOutcome, SelectPhase, number};
use super::super::{CommandSpec, bad, bool_or, point_param, targets};
use super::{KEYWORDS, angle, check_size, count, fmt, nesting, other, yes, yes_no};
use super::{
KEY_POINT_PROMPT, KEYWORDS, angle, check_size, count, fmt, key_point_of, key_point_param, nearest_key_point, nesting, other, yes, yes_no,
};
use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
pub(super) fn specs() -> Vec<CommandSpec> {
@@ -26,7 +28,7 @@ pub(super) fn specs() -> Vec<CommandSpec> {
CommandSpec::new("arrayedit", "Edit Array", run_arrayedit)
.menu(&["Modify", "Object", "Array"])
.params(
"{handle, cols?, rows?, colSpacing?, rowSpacing?, axisAngle? (degrees), rowElevation?, levels?, levelSpacing?, items?, angle? (fill, degrees), angleBetween?, rotate?: bool, center? ([x, y]), base? ([x, y], the new base point), reset?: bool, replace?: {handles, base? ([x, y], default the objects' centre), items: [[i, j, level]…] | \"source\"}, source?: {item? ([i, j, level], default [0, 0, 0])} (places the source objects for editing; ARRAYCLOSE ends)}",
"{handle, cols?, rows?, colSpacing?, rowSpacing?, axisAngle? (degrees), rowElevation?, levels?, levelSpacing?, items?, angle? (fill, degrees), angleBetween?, rotate?: bool, center? ([x, y]), base? ([x, y], the new base point), reset?: bool, replace?: {handles, base? ([x, y], default the objects' centre), items: [[i, j, level]…] | \"source\"}, keyPoint? ([x, y]: the new base point is the source objects' key point nearest it, on the item there), replace?.keyPoint? ([x, y]: the replacement objects' key point nearest it is their base point), source?: {item? ([i, j, level], default [0, 0, 0])} (places the source objects for editing; ARRAYCLOSE ends)}",
)
.interactive(|_| Ok(Box::new(EditM::default()))),
CommandSpec::new("arrayclose", "Close Array Editing", run_arrayclose)
@@ -215,6 +217,16 @@ fn item_at(d: &Drawing, h: Handle, at: Vec2, tol: f64) -> Option<(u32, u32, u32)
best.map(|b| b.0)
}
/// ARRAYEDIT Key point: the key point of the source objects nearest `at`, with the objects as
/// placed at the item under `at` (within `tol`).
fn source_key_point(d: &Drawing, h: Handle, at: Vec2, tol: f64) -> Result<Vec2> {
let item = item_at(d, h, at, tol).ok_or_else(|| other("No array item there; specify a point on an item of the array."))?;
let (ins, blk, p) = array_of(d, h)?;
let src = d.block(&p.source).ok_or_else(|| other("The array's source block is missing."))?;
let m = ins.transform(blk.base.xy()).then_before(item_place(&p, item)?).then_before(Mat3::translate(-src.base.xy()));
nearest_key_point(src.entities.iter().map(|e| e.as_ref()), &m, at)?.ok_or_else(|| other("The source objects have no key point; specify a point."))
}
/// Move the base point of array `h` to world point `base` without moving the items.
fn rebase(s: &mut Session, h: Handle, base: Vec2) -> Result<()> {
let d = s.doc()?;
@@ -343,6 +355,9 @@ fn close_source(s: &mut Session, save: bool) -> Result<Value> {
// ---------------- JSON ----------------
/// How far outside an item's extents a JSON `keyPoint` may be.
const KEY_POINT_TOLERANCE: f64 = 1e-6;
fn item_param(v: &Value) -> Option<(u32, u32, u32)> {
let a = v.as_array()?;
let n = |k: usize| a.get(k).and_then(Value::as_u64).and_then(|x| u32::try_from(x).ok());
@@ -449,9 +464,7 @@ fn fill_from_between(b: f64, items: u32) -> Result<f64> {
fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
let h = super::super::curves::handle_param(p, "handle").ok_or_else(|| bad("arrayedit", "`handle` (the array) is required"))?;
refuse_while_editing(s)?;
let (ins, blk, _) = array_of(s.doc()?, h)?;
let w = ins.transform(blk.base.xy());
let to_local = w.inverse().ok_or_else(|| other("The array's scale is zero."))?;
array_of(s.doc()?, h)?;
if bool_or(p, "reset", false) {
let (_, _, mut a) = array_of(s.doc()?, h)?;
a.replaced.clear();
@@ -459,7 +472,10 @@ fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
}
if let Some(r) = p.get("replace").filter(|v| !v.is_null()) {
let hs = targets(s, r)?;
let base = point_param(r, "base").unwrap_or_else(|| s.doc().map(|d| centroid(d, &hs)).unwrap_or_default());
let base = match key_point_param("arrayedit", r)? {
Some(k) => key_point_of(s.doc()?, &hs, k)?,
None => point_param(r, "base").unwrap_or_else(|| s.doc().map(|d| centroid(d, &hs)).unwrap_or_default()),
};
let name = block_from(s, h, &hs, base)?;
let (_, _, mut a) = array_of(s.doc()?, h)?;
match r.get("items") {
@@ -477,7 +493,13 @@ fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
if let Some(b) = point_param(p, "base") {
rebase(s, h, b)?;
}
let (_, _, mut a) = array_of(s.doc()?, h)?;
if let Some(k) = key_point_param("arrayedit", p)? {
let at = source_key_point(s.doc()?, h, k, KEY_POINT_TOLERANCE)?;
rebase(s, h, at)?;
}
// A new base point moves the array's insertion point: read `center` in its placement after.
let (ins, blk, mut a) = array_of(s.doc()?, h)?;
let to_local = ins.transform(blk.base.xy()).inverse().ok_or_else(|| other("The array's scale is zero."))?;
let before = a.clone();
apply_params(&mut a, p, &to_local)?;
if a != before {
@@ -507,6 +529,8 @@ enum Stage {
Select,
Main,
Base,
/// Base point: Key point (of the source objects).
BaseKey,
ColsCount,
ColsSpace,
ColsTotal,
@@ -524,6 +548,8 @@ enum Stage {
/// REPlace: objects, their base point, then the items to replace.
RepSelect,
RepBase,
/// REPlace base point: Key point (of the replacement objects).
RepKey,
RepItems,
/// Source: the item whose objects are placed for editing.
SourceItem,
@@ -659,6 +685,7 @@ impl Interactive for EditM {
.kw(&["Source", "REPlace", "Base point", "Rows", "Columns", "Levels", "RESet", "eXit"])
.default("eXit"),
Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
ColsCount => Prompt::new("Enter the number of columns", Accept::NUMBER).default(cols.to_string()),
ColsSpace => dist("Specify the distance between columns", cs).kw(&["Total"]),
ColsTotal => dist("Specify the distance between the first and last column", total(cols, cs)),
@@ -687,6 +714,7 @@ impl Interactive for EditM {
Rotate => Prompt::new("Rotate arrayed items?", KEYWORDS).kw(&["Yes", "No"]).default(yes(polar.as_ref().is_none_or(|k| k.rotate))),
RepSelect => Prompt::new("Select replacement objects", Accept::SELECT),
RepBase => Prompt::new("Select base point of replacement objects", Accept::POINT).kw(&["Key point"]).default("centroid"),
RepKey => Prompt::new("Specify key point on replacement objects to use as base point", Accept::POINT),
RepItems => Prompt::new("Select an item in array to replace", Accept::POINT).kw(&["Source objects"]),
SourceItem => Prompt::new("Select item in array", Accept::POINT),
}
@@ -746,10 +774,21 @@ impl Interactive for EditM {
}
Main
}
(Base | RepBase, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
stage
(Base, Input::Keyword(_)) => BaseKey,
(RepBase, Input::Keyword(_)) => RepKey,
(BaseKey, Input::Point(p)) => {
let tol = s.pixel_size() * s.settings.pickbox;
let at = source_key_point(s.doc()?, h, *p, tol)?;
rebase(s, h, at)?;
Main
}
(BaseKey, Input::Enter) => Base,
(RepKey, Input::Point(p)) => {
let base = key_point_of(s.doc()?, &self.rep_objs, *p)?;
self.rep_block = Some(block_from(s, h, &self.rep_objs.clone(), base)?);
RepItems
}
(RepKey, Input::Enter) => RepBase,
(ColsCount | Items, _) => match count(&i, c64, self.max_for(s, r64.saturating_mul(l64)))? {
Some(n) => {
let n = super::count32(n);
+164 -6
View File
@@ -4,6 +4,7 @@
use cadcraft_doc::color::Color;
use cadcraft_doc::{AttribProps, Common, EntityKind, HAlign, Handle, Text, VAlign};
use cadcraft_geom::Vec3;
use serde_json::{Map, Value, json};
use crate::cmd::curves::KW;
@@ -153,6 +154,19 @@ fn set_value(text: &mut Text, value: String) {
}
}
/// Move `text` so the point it is placed by lands on `to`: the alignment point of justified text,
/// else the insertion point. Both points move by the same offset, so aligned and fit text keep the
/// baseline between them.
fn move_text(text: &mut Text, to: cadcraft_geom::Vec2) {
let anchor = match text.align_pt {
Some(ap) if !matches!((text.halign, text.valign), (HAlign::Left, VAlign::Baseline) | (HAlign::Aligned | HAlign::Fit, _)) => ap,
_ => text.insert,
};
let d = Vec3::new(to.x - anchor.x, to.y - anchor.y, 0.0);
text.insert = text.insert + d;
text.align_pt = text.align_pt.map(|ap| ap + d);
}
/// Change the properties set on attribute `k` of block reference `h`.
fn set_props(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut AttribProps)) -> Result<()> {
s.doc_mut()?.modify_entity(h, |e| {
@@ -165,6 +179,18 @@ fn set_props(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut Attri
Ok(())
}
/// Modify the attribute `k` of block reference `h`.
fn modify_attrib(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut cadcraft_doc::Attrib)) -> Result<()> {
s.doc_mut()?.modify_entity(h, |e| {
if let EntityKind::Insert(ins) = &mut e.kind
&& let Some(a) = ins.attribs.get_mut(k)
{
f(a);
}
})?;
Ok(())
}
/// The layer and colour attribute `k` of block reference `h` is drawn with: its own, else its
/// definition's (layer 0 is the reference's layer).
fn current_props(s: &Session, (h, k): (Handle, usize)) -> Option<(String, Color)> {
@@ -180,6 +206,14 @@ fn current_props(s: &Session, (h, k): (Handle, usize)) -> Option<(String, Color)
Some((layer, c.color))
}
/// The current text properties of attribute `k` of block reference `h`.
fn current_text(s: &Session, (h, k): (Handle, usize)) -> Option<cadcraft_doc::Text> {
let d = s.doc().ok()?;
let e = d.entity(h)?;
let EntityKind::Insert(ins) = &e.kind else { return None };
ins.attribs.get(k).map(|a| a.text.clone())
}
/// Replace every `find` in `value` with `with`, unless the result would be too long.
fn replaced(value: &str, find: &str, with: &str) -> Option<String> {
if find.is_empty() || !value.contains(find) {
@@ -292,6 +326,10 @@ enum Stage {
Select,
/// One at a time: what to do with the current attribute.
Option,
Position,
Height,
Angle,
Style,
ValueKind,
NewValue,
Layer,
@@ -365,6 +403,7 @@ impl Interactive for DashAtteditM {
}
fn prompt(&self, s: &Session) -> Prompt {
let cur = self.items.get(self.cur).and_then(|it| current_props(s, *it));
let cur_text = self.items.get(self.cur).and_then(|it| current_text(s, *it));
match self.stage {
Stage::OneAtATime => Prompt::new("Edit attributes one at a time?", KW).kw(&["Yes", "No"]).default("Y"),
Stage::VisibleOnly => Prompt::new("Edit only attributes visible on screen?", KW).kw(&["Yes", "No"]).default("Y"),
@@ -372,7 +411,31 @@ impl Interactive for DashAtteditM {
Stage::TagSpec => Prompt::new("Enter attribute tag specification", Accept::TEXT).default("*"),
Stage::ValueSpec => Prompt::new("Enter attribute value specification", Accept::TEXT).default("*"),
Stage::Select => Prompt::new("Select attributes", Accept::SELECT),
Stage::Option => Prompt::new("Enter an option", KW).kw(&["Value", "Layer", "Color", "Next"]).default("N"),
Stage::Option => {
Prompt::new("Enter an option", KW).kw(&["Value", "Position", "Height", "Angle", "Style", "Layer", "Color", "Next"]).default("N")
}
Stage::Position => Prompt::new("Enter new text insertion point", Accept::POINT),
Stage::Height => {
let p = Prompt::new("Enter new text height", Accept::POINT_OR_NUMBER);
match cur_text {
Some(t) => p.default(format!("{:.4}", t.height)),
None => p,
}
}
Stage::Angle => {
let p = Prompt::new("Enter new text rotation angle", Accept::POINT_OR_NUMBER);
match cur_text {
Some(t) => p.default(format!("{:.4}", t.rotation.to_degrees())),
None => p,
}
}
Stage::Style => {
let p = Prompt::new("Enter new text style", Accept::TEXT);
match cur_text {
Some(t) => p.default(t.style),
None => p,
}
}
Stage::ValueKind => Prompt::new("Enter type of value modification", KW).kw(&["Change", "Replace"]).default("R"),
Stage::NewValue => Prompt::new("Enter new attribute value", Accept::TEXT),
Stage::Layer => {
@@ -446,6 +509,10 @@ impl Interactive for DashAtteditM {
}
Stage::Option => match &i {
Input::Keyword(k) if k == "Value" => self.stage = Stage::ValueKind,
Input::Keyword(k) if k == "Position" => self.stage = Stage::Position,
Input::Keyword(k) if k == "Height" => self.stage = Stage::Height,
Input::Keyword(k) if k == "Angle" => self.stage = Stage::Angle,
Input::Keyword(k) if k == "Style" => self.stage = Stage::Style,
Input::Keyword(k) if k == "Layer" => self.stage = Stage::Layer,
Input::Keyword(k) if k == "Color" => self.stage = Stage::Color,
Input::Keyword(_) | Input::Enter => {
@@ -457,14 +524,105 @@ impl Interactive for DashAtteditM {
}
Input::Text(t) => {
let tl = t.trim().to_ascii_lowercase();
let later = ["Position", "Height", "Angle", "Style"];
return match later.iter().find(|k| !tl.is_empty() && k.to_ascii_lowercase().starts_with(&tl)) {
Some(k) => Err(EngineError::Other(format!("{k} is not available yet."))),
None => Err(invalid_keyword()),
};
let opts = ["Value", "Position", "Height", "Angle", "Style", "Layer", "Color", "Next"];
match opts.iter().find(|k| !tl.is_empty() && k.to_ascii_lowercase().starts_with(&tl)) {
Some(&"Value") => self.stage = Stage::ValueKind,
Some(&"Position") => self.stage = Stage::Position,
Some(&"Height") => self.stage = Stage::Height,
Some(&"Angle") => self.stage = Stage::Angle,
Some(&"Style") => self.stage = Stage::Style,
Some(&"Layer") => self.stage = Stage::Layer,
Some(&"Color") => self.stage = Stage::Color,
Some(&"Next") => {
self.cur += 1;
if self.cur >= self.items.len() {
return Ok(Step::Done);
}
self.show_current(s);
}
_ => return Err(invalid_keyword()),
}
}
_ => {}
},
Stage::Position => {
let p = match i {
Input::Point(p) => p,
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| move_text(&mut a.text, p))?;
}
self.stage = Stage::Option;
}
Stage::Height => {
let h = match &i {
Input::Point(p) => {
let cur_pt = self.items.get(self.cur).and_then(|it| current_text(s, *it)).map(|t| t.insert.xy());
match cur_pt {
Some(base) => base.dist(*p).max(1e-9),
None => p.len().max(1e-9),
}
}
Input::Text(t) if !t.trim().is_empty() => crate::units::parse_distance(t.trim())
.filter(|v| *v > 0.0)
.ok_or_else(|| EngineError::Other("Requires a positive number.".into()))?,
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.height = h;
})?;
}
self.stage = Stage::Option;
}
Stage::Angle => {
let ang = match &i {
Input::Point(p) => {
let cur_pt = self.items.get(self.cur).and_then(|it| current_text(s, *it)).map(|t| t.insert.xy());
match cur_pt {
Some(base) => base.angle_to(*p),
None => p.y.atan2(p.x),
}
}
Input::Text(t) if !t.trim().is_empty() => {
s.angle_settings().direction(t.trim()).ok_or_else(|| EngineError::Other("Requires an angle.".into()))?
}
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.rotation = ang;
})?;
}
self.stage = Stage::Option;
}
Stage::Style => {
let Some(t) = text else { return Ok(Step::Continue) };
let t = t.trim();
if !t.is_empty() {
let st =
s.doc()?.text_style(t).map(|st| st.name.clone()).ok_or_else(|| EngineError::Other(format!("Cannot find style \"{t}\".")))?;
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.style = st;
})?;
}
}
self.stage = Stage::Option;
}
Stage::ValueKind => match &i {
Input::Keyword(k) if k == "Change" => self.stage = Stage::Find,
Input::Keyword(_) | Input::Enter => self.stage = Stage::NewValue,
-134
View File
@@ -1,134 +0,0 @@
//! MENUBAR and TOOLBAR: show or hide the window's menu bar and tool bar from the command line, as
//! in AutoCAD. With the menu bar hidden on Windows and Linux (where it is the only menu), typing
//! these is the way back.
//!
//! The UI owns the bars: it reports what it shows in [`Session::bars_shown`] and applies
//! [`Session::bars_request`], which these commands set.
use serde_json::{Value, json};
use super::{CommandSpec, always, bad};
use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
/// The interface bars MENUBAR and TOOLBAR control.
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub struct InterfaceBars {
pub menubar: bool,
pub toolbar: bool,
}
impl Default for InterfaceBars {
fn default() -> Self {
InterfaceBars { menubar: true, toolbar: true }
}
}
/// A change MENUBAR or TOOLBAR asked for: only the bars a command set, so the UI leaves the other
/// as it is (it may have been changed since).
#[derive(Clone, Copy, Debug, Default, PartialEq, Eq)]
pub struct BarsRequest {
pub menubar: Option<bool>,
pub toolbar: Option<bool>,
}
pub fn specs() -> Vec<CommandSpec> {
vec![
CommandSpec::new("menubar", "Menu Bar", run_menubar)
.params("{value?: 0|1} (1 shows the in-window menu bar, 0 hides it; without it, reports it)")
.enabled(always)
.noundo()
.interactive(|s| Ok(Box::new(MenubarM { current: s.bars_shown.menubar }))),
CommandSpec::new("toolbar", "Tool Bar", run_toolbar)
.alias(&["-toolbar"])
.params("{show?: bool} (without it, reports it)")
.enabled(always)
.noundo()
.interactive(|_| Ok(Box::new(ToolbarM))),
]
}
fn set_menubar(s: &mut Session, on: bool) {
s.bars_shown.menubar = on;
s.bars_request.menubar = Some(on);
}
fn set_toolbar(s: &mut Session, show: bool) {
s.bars_shown.toolbar = show;
s.bars_request.toolbar = Some(show);
}
fn run_menubar(s: &mut Session, p: &Value) -> Result<Value> {
let v = match p.get("value") {
None | Some(Value::Null) => return Ok(json!({ "value": u8::from(s.bars_shown.menubar) })),
Some(v) => v
.as_u64()
.or_else(|| v.as_str().and_then(|t| t.trim().parse().ok()))
.filter(|v| *v <= 1)
.ok_or_else(|| bad("menubar", "`value` must be 0 or 1"))?,
};
set_menubar(s, v == 1);
Ok(json!({ "value": v }))
}
fn run_toolbar(s: &mut Session, p: &Value) -> Result<Value> {
let Some(show) = p.get("show").filter(|v| !v.is_null()) else { return Ok(json!({ "show": s.bars_shown.toolbar })) };
let show = show.as_bool().ok_or_else(|| bad("toolbar", "`show` must be true or false"))?;
set_toolbar(s, show);
Ok(json!({ "show": show }))
}
/// Typed MENUBAR: "Enter new value for MENUBAR <1>:".
struct MenubarM {
current: bool,
}
impl Interactive for MenubarM {
fn name(&self) -> &'static str {
"MENUBAR"
}
fn prompt(&self, _s: &Session) -> Prompt {
Prompt::new("Enter new value for MENUBAR", Accept::NUMBER).default(u8::from(self.current).to_string())
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
match i {
Input::Enter => Ok(Step::Done),
Input::Text(t) => match run_menubar(s, &json!({ "value": t })) {
Ok(_) => Ok(Step::Done),
Err(_) => {
s.echo("Requires 0 or 1.");
Ok(Step::Continue)
}
},
_ => Ok(Step::Continue),
}
}
}
/// Typed TOOLBAR: "Enter tool bar option [Show/Hide] <Show>:" (CADCraft has one tool bar).
struct ToolbarM;
impl Interactive for ToolbarM {
fn name(&self) -> &'static str {
"TOOLBAR"
}
fn prompt(&self, _s: &Session) -> Prompt {
Prompt::new("Enter tool bar option", Accept::TEXT).kw(&["Show", "Hide"]).default("Show")
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
let word = match &i {
Input::Enter => "show".to_string(),
Input::Keyword(k) | Input::Text(k) => k.trim().to_ascii_lowercase(),
_ => return Ok(Step::Continue),
};
let show = if !word.is_empty() && "show".starts_with(&word) {
true
} else if !word.is_empty() && "hide".starts_with(&word) {
false
} else {
s.echo("Invalid option keyword.");
return Ok(Step::Continue);
};
run_toolbar(s, &json!({ "show": show }))?;
Ok(Step::Done)
}
}
+246 -16
View File
@@ -1,6 +1,7 @@
//! Layers: LAYER (programmatic sub-ids, -LAYER prompts), layer tools (LAYMCUR, LAYISO, LAYOFF, LAYFRZ…).
mod prompts;
mod state_prompts;
use cadcraft_color::Color;
use cadcraft_doc::{Layer, Lineweight};
@@ -55,7 +56,9 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("layon", "Turn All Layers On", |s, _| all_layers(s, |l| l.on = true)),
CommandSpec::new("laythw", "Thaw All Layers", |s, _| all_layers(s, |l| l.frozen = false)),
CommandSpec::new("layerp", "Previous Layer", run_layerp).menu(&["Format", "Layer Tools", "Previous Layer"]),
CommandSpec::new("layerstate.save", "Save Layer State", run_state_save).menu(&["Format", "Layer States Manager..."]).params("{name}"),
CommandSpec::new("layerstate.save", "Save Layer State", run_state_save)
.menu(&["Format", "Layer States Manager..."])
.params("{name, mask? (properties restoring sets: 1 on, 2 frozen, 4 locked, 8 plot, 16 new viewport freeze, 32 color, 64 linetype, 128 lineweight, 256 plot style, 1024 transparency; default all)}"),
CommandSpec::new("layerstate.restore", "Restore Layer State", run_state_restore).params("{name}"),
CommandSpec::new("layerstate.list", "List Layer States", run_state_list).params("{} → states").noundo(),
CommandSpec::new("layerstate.delete", "Delete Layer State", run_state_delete).params("{name}"),
@@ -400,31 +403,108 @@ fn all_layers(s: &mut Session, f: fn(&mut Layer)) -> Result<Value> {
}
fn run_state_save(s: &mut Session, p: &Value) -> Result<Value> {
use cadcraft_doc::LayerState as S;
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.save", "`name` is required"))?.to_string();
// As -LAYER stAte Save and layerstate.rename take names: none empty, over 255 characters, with a
// control character or with one AutoCAD 2024 refuses (measured for Save).
if !valid_name(&name) {
return Err(bad("layerstate.save", "invalid name"));
}
// The properties restoring sets; bit 512, which no property toggles, is always set, as AutoCAD
// 2024 saves it (measured: On alone is 513).
let mask = match p.get("mask") {
None | Some(Value::Null) => S::ALL,
Some(v) => {
let m = v.as_u64().filter(|m| m & !u64::from(S::ALL) == 0);
m.and_then(|m| u32::try_from(m).ok()).ok_or_else(|| bad("layerstate.save", "`mask` must be a sum of layer state bits (0 to 2047)"))? | 512
}
};
let d = s.doc_mut()?;
let layers = d.layers.clone();
d.layer_states.retain(|st| st.name != name);
d.layer_states.push(cadcraft_doc::LayerState { name, layers });
let current = d.header.str("CLAYER", "0");
// Replace the state Restore and Delete reach (the same spelling, else another case), so a
// drawing keeps one state per name: AutoCAD 2024 finds states without regard to case. Its
// -LAYER stAte Save and layerstate-save refuse `s1` after `S1` (measured), as the command line
// here does; this command replaces, as it does a state of the same spelling. When a file holds
// both `S1` and `s1`, only the one spelled so is replaced.
if let Some(i) = state_index(d, &name) {
d.layer_states.remove(i);
}
d.layer_states.push(S { mask, ..S::new(name, layers, current) });
ok()
}
/// The saved state called `name`: the one spelled so, else the first whose name differs only in
/// case. AutoCAD 2024 finds layer states without regard to case (measured: Restore, Edit, Name
/// and Delete of `s1` reach `S1`); case is compared as for layers and view snapshots.
pub(super) fn state_index(d: &cadcraft_doc::Drawing, name: &str) -> Option<usize> {
d.layer_states.iter().position(|st| st.name == name).or_else(|| d.layer_states.iter().position(|st| st.name.eq_ignore_ascii_case(name)))
}
fn run_state_restore(s: &mut Session, p: &Value) -> Result<Value> {
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.restore", "`name` is required"))?;
let d = s.doc_mut()?;
let st = d.layer_states.iter().find(|st| st.name == name).cloned().ok_or_else(|| bad("layerstate.restore", "no such layer state"))?;
restore_layers(d, st.layers);
let st = state_index(d, name).and_then(|i| d.layer_states.get(i)).cloned().ok_or_else(|| bad("layerstate.restore", "no such layer state"))?;
restore_state(d, &st);
ok()
}
/// Restore a saved layer state as AutoCAD 2024 does (measured): first the current layer it
/// names, when the drawing has it and the restore doesn't leave it frozen, then on each drawing
/// layer the state names (without regard to case) the properties its mask covers. The current
/// layer is never frozen; other properties (descriptions, names) stay as they are.
pub(crate) fn restore_state(d: &mut cadcraft_doc::Drawing, st: &cadcraft_doc::LayerState) {
use cadcraft_doc::LayerState as S;
// A frozen layer only thaws with Frozen in the mask and an entry of its own: without one
// AutoCAD 2024 keeps the current layer (measured).
let thaws = |l: &Layer| st.mask & S::FROZEN != 0 && st.layers.iter().any(|saved| saved.name.eq_ignore_ascii_case(&l.name));
if let Some(l) = d.layer(&st.current).filter(|l| !l.frozen || thaws(l)) {
let name = l.name.clone();
d.header.set_str("CLAYER", &name);
}
let current = d.header.str("CLAYER", "0");
let index = layer_index(d);
let has = |bit: u32| st.mask & bit != 0;
for saved in &st.layers {
let Some(l) = index.get(&saved.name.to_ascii_lowercase()).and_then(|&i| d.layers.get_mut(i)) else { continue };
if has(S::ON) {
l.on = saved.on;
}
if has(S::FROZEN) {
l.frozen = saved.frozen && !l.name.eq_ignore_ascii_case(&current);
}
if has(S::LOCKED) {
l.locked = saved.locked;
}
if has(S::PLOT) {
l.plot = saved.plot;
}
if has(S::VP_FREEZE_NEW) {
l.vp_freeze_new = saved.vp_freeze_new;
}
if has(S::COLOR) {
l.color = saved.color;
}
if has(S::LINETYPE) {
l.linetype.clone_from(&saved.linetype);
}
if has(S::LINEWEIGHT) {
l.lineweight = saved.lineweight;
}
if has(S::PLOT_STYLE) {
l.plot_style.clone_from(&saved.plot_style);
}
if has(S::TRANSPARENCY) {
l.transparency = saved.transparency;
}
}
}
/// Put the saved layers back over the drawing's layers of the same name (without regard to case);
/// saved layers the drawing no longer has are skipped. Both lists can come from a file, so the
/// drawing's layers are looked up in an index rather than scanned per saved layer.
pub(crate) fn restore_layers(d: &mut cadcraft_doc::Drawing, saved: Vec<Layer>) {
let mut index: std::collections::HashMap<String, usize> = std::collections::HashMap::with_capacity(d.layers.len());
for (i, l) in d.layers.iter().enumerate() {
// The first of names that differ only in case, as `Drawing::layer_mut` finds it.
index.entry(l.name.to_ascii_lowercase()).or_insert(i);
}
let index = layer_index(d);
for layer in saved {
if let Some(l) = index.get(&layer.name.to_ascii_lowercase()).and_then(|&i| d.layers.get_mut(i)) {
*l = layer;
@@ -432,6 +512,16 @@ pub(crate) fn restore_layers(d: &mut cadcraft_doc::Drawing, saved: Vec<Layer>) {
}
}
/// The drawing's layers by lower-case name: the first of names that differ only in case, as
/// `Drawing::layer_mut` finds it.
fn layer_index(d: &cadcraft_doc::Drawing) -> std::collections::HashMap<String, usize> {
let mut index = std::collections::HashMap::with_capacity(d.layers.len());
for (i, l) in d.layers.iter().enumerate() {
index.entry(l.name.to_ascii_lowercase()).or_insert(i);
}
index
}
fn run_state_list(s: &mut Session, _p: &Value) -> Result<Value> {
let d = s.doc()?;
let states: Vec<Value> = d.layer_states.iter().map(|st| json!({ "name": st.name, "layers": st.layers.len() })).collect();
@@ -446,10 +536,8 @@ fn run_state_list(s: &mut Session, _p: &Value) -> Result<Value> {
fn run_state_delete(s: &mut Session, p: &Value) -> Result<Value> {
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.delete", "`name` is required"))?;
let d = s.doc_mut()?;
if !d.layer_states.iter().any(|st| st.name == name) {
return Err(bad("layerstate.delete", "no such layer state"));
}
d.layer_states.retain(|st| st.name != name);
let i = state_index(d, name).ok_or_else(|| bad("layerstate.delete", "no such layer state"))?;
d.layer_states.remove(i);
ok()
}
@@ -460,10 +548,12 @@ fn run_state_rename(s: &mut Session, p: &Value) -> Result<Value> {
return Err(bad("layerstate.rename", "invalid name"));
}
let d = s.doc_mut()?;
if d.layer_states.iter().any(|st| st.name == to) {
// A name in another case counts, the state's own too (AutoCAD 2024 refuses `S1` to `s1`,
// measured).
if d.layer_states.iter().any(|st| st.name.eq_ignore_ascii_case(&to)) {
return Err(bad("layerstate.rename", format!("layer state `{to}` already exists")));
}
let st = d.layer_states.iter_mut().find(|st| st.name == from).ok_or_else(|| bad("layerstate.rename", "no such layer state"))?;
let st = state_index(d, from).and_then(|i| d.layer_states.get_mut(i)).ok_or_else(|| bad("layerstate.rename", "no such layer state"))?;
st.name = to;
ok()
}
@@ -516,6 +606,146 @@ mod tests {
assert!(used.contains(&true) && used.contains(&false));
}
/// Restoring follows AutoCAD 2024 (measured with -LAYER stAte and states written into a DXF):
/// the current layer first, then only the properties the mask covers; the current layer stays
/// thawed; a current layer that is empty or gone leaves the current layer as it is.
#[test]
fn layer_state_restore_follows_the_mask_and_current_layer() {
use cadcraft_color::Color;
use cadcraft_doc::LayerState;
let mut s = Session::new();
s.execute("layer.new", &json!({ "name": "A", "color": 1, "current": true })).unwrap();
s.execute("layer.new", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "all" })).unwrap();
let saved = s.doc().unwrap().layer_states[0].clone();
assert_eq!((saved.mask, saved.current.as_str()), (LayerState::ALL, "A"));
// Only On: A's colour stays green, B comes back on (AutoCAD's S7, mask 513).
let d = s.doc_mut().unwrap();
d.layer_states.push(LayerState { name: "on".into(), mask: LayerState::ON | 512, ..saved.clone() });
s.execute("layer.set", &json!({ "name": "A", "color": 3 })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "on": false, "locked": true })).unwrap();
s.execute("layer.current", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "on" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
let (a, b) = (d.layer("A").unwrap(), d.layer("B").unwrap());
assert_eq!((a.color, b.on, b.locked), (Color::Index(3), true, true));
// Every property.
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.layer("B").unwrap().locked), (Color::Index(1), false));
// A state that freezes B with no current layer of its own (or one that is gone), restored
// with B current: B stays current and thawed; A is turned off.
for current in ["", "NOSUCH"] {
let mut frozen = s.doc().unwrap().layers.clone();
for l in &mut frozen {
l.frozen = l.name == "B";
l.on = l.name != "A";
}
s.doc_mut().unwrap().layer_states.push(LayerState::new(format!("f{current}"), frozen.clone(), current));
s.execute("layer.current", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": format!("f{current}") })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B", "{current:?}");
assert!(!d.layer("B").unwrap().frozen && !d.layer("A").unwrap().on, "{current:?}");
// Naming A current, it becomes current and B freezes.
s.doc_mut().unwrap().layer_states.push(LayerState::new("fA", frozen, "A"));
s.execute("layerstate.restore", &json!({ "name": "fA" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
s.doc_mut().unwrap().layer_states.retain(|st| st.name != "fA");
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
}
// A current layer the state's mask leaves frozen doesn't become current (AutoCAD's S9: On
// only, current B; restored with A current and B frozen).
let mut on_only = s.doc().unwrap().layer_states[0].clone();
(on_only.name, on_only.mask, on_only.current) = ("S9".into(), LayerState::ON | 512, "B".into());
s.doc_mut().unwrap().layer_states.push(on_only);
s.execute("layer.current", &json!({ "name": "A" })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "frozen": true })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "S9" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
// With Frozen in the mask B is thawed and made current.
let mut thaw = s.doc().unwrap().layer_states[0].clone();
(thaw.name, thaw.current) = ("thaw".into(), "B".into());
s.doc_mut().unwrap().layer_states.push(thaw);
s.execute("layerstate.restore", &json!({ "name": "thaw" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B");
assert!(!d.layer("B").unwrap().frozen);
// Frozen in the mask, but no entry for B (a state written elsewhere): nothing would thaw
// B, so A stays current and B frozen (AutoCAD 2024, measured).
let mut no_entry = s.doc().unwrap().layer_states[0].clone();
(no_entry.name, no_entry.current) = ("no entry".into(), "B".into());
no_entry.layers.retain(|l| l.name != "B");
s.doc_mut().unwrap().layer_states.push(no_entry);
s.execute("layer.current", &json!({ "name": "A" })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "frozen": true })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "no entry" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
// An entry spelled in another case is B's (layer names ignore case, as the restore of the
// properties does): B is thawed and made current.
let mut other_case = s.doc().unwrap().layer_states[0].clone();
(other_case.name, other_case.current) = ("other case".into(), "B".into());
for l in other_case.layers.iter_mut().filter(|l| l.name == "B") {
l.name = "b".into();
}
s.doc_mut().unwrap().layer_states.push(other_case);
s.execute("layerstate.restore", &json!({ "name": "other case" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B");
assert!(!d.layer("B").unwrap().frozen);
// What a state doesn't hold stays: the description.
s.execute("layer.set", &json!({ "name": "A", "description": "kept" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
assert_eq!(s.doc().unwrap().layer("A").unwrap().description, "kept");
}
/// Plotting, freezing in new viewports, linetype, lineweight, plot style and transparency each
/// come back under their own mask bit only: a state of one bit restores that property and
/// leaves the other five as they are.
#[test]
fn layer_state_restores_each_property_under_its_own_bit_only() {
use cadcraft_doc::{Drawing, LayerState as S, Lineweight};
let mut s = Session::new();
s.execute("layer.new", &json!({ "name": "A" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "all" })).unwrap();
let saved = s.doc().unwrap().layer_states[0].clone();
let props = |d: &Drawing| {
let l = d.layer("A").unwrap();
(l.plot, l.vp_freeze_new, l.linetype.clone(), l.lineweight, l.plot_style.clone(), l.transparency)
};
let change = |d: &mut Drawing| {
let l = d.layer_mut("A").unwrap();
(l.plot, l.vp_freeze_new, l.linetype, l.lineweight, l.plot_style, l.transparency) =
(false, true, "DASHED".into(), Lineweight::from_dxf(50), "Thick".into(), 40);
};
let before = props(s.doc().unwrap());
change(s.doc_mut().unwrap());
let after = props(s.doc().unwrap());
for bit in [S::PLOT, S::VP_FREEZE_NEW, S::LINETYPE, S::LINEWEIGHT, S::PLOT_STYLE, S::TRANSPARENCY] {
let name = format!("b{bit}");
s.doc_mut().unwrap().layer_states.push(S { name: name.clone(), mask: bit | 512, ..saved.clone() });
change(s.doc_mut().unwrap());
s.execute("layerstate.restore", &json!({ "name": name })).unwrap();
let mut want = after.clone();
match bit {
S::PLOT => want.0 = before.0,
S::VP_FREEZE_NEW => want.1 = before.1,
S::LINETYPE => want.2.clone_from(&before.2),
S::LINEWEIGHT => want.3 = before.3,
S::PLOT_STYLE => want.4.clone_from(&before.4),
_ => want.5 = before.5,
}
assert_eq!(props(s.doc().unwrap()), want, "mask {bit}");
}
}
#[test]
fn rejected_layer_set_changes_nothing() {
let mut s = Session::new();
+20 -7
View File
@@ -8,6 +8,7 @@ use serde_json::{Value, json};
use super::super::find_command;
use super::super::qselect::wildcard;
use super::state_prompts;
use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
const OPTIONS: &[&str] = &[
@@ -34,9 +35,9 @@ const OPTIONS: &[&str] = &[
];
/// Keyword-only: spaces separate inputs.
const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
pub(super) const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
/// A name or value: Space ends the input, as it does in AutoCAD scripts.
const NAME: Accept = Accept { number: true, ..Accept::TEXT };
pub(super) const NAME: Accept = Accept { number: true, ..Accept::TEXT };
/// A per-layer change applied to a list of layer names.
#[derive(Clone, Debug)]
@@ -111,6 +112,8 @@ enum Stage {
Layers(Change),
/// Turning the current layer off asks first.
ConfirmOff(Vec<String>),
/// stAte and its options.
State(state_prompts::Stage),
}
#[derive(Default)]
@@ -123,19 +126,19 @@ fn current_layer(s: &Session) -> String {
}
/// Run a layer command's body directly: the running command records the single undo step.
fn call(s: &mut Session, id: &str, p: &Value) -> Result<Value> {
pub(super) fn call(s: &mut Session, id: &str, p: &Value) -> Result<Value> {
let spec = find_command(id).ok_or_else(|| EngineError::UnknownCommand(id.into()))?;
(spec.run)(s, p)
}
fn message(e: &EngineError) -> String {
pub(super) fn message(e: &EngineError) -> String {
match e {
EngineError::BadParams { msg, .. } => msg.clone(),
other => other.to_string(),
}
}
fn retry(msg: impl Into<String>) -> EngineError {
pub(super) fn retry(msg: impl Into<String>) -> EngineError {
EngineError::Other(msg.into())
}
@@ -188,8 +191,9 @@ impl LayerM {
"LOck" => Stage::Layers(Change::Lock),
"Unlock" => Stage::Layers(Change::Unlock),
"Description" => Stage::Description,
"stAte" => Stage::State(state_prompts::Stage::Option),
other => {
// MATerial, stAte, rEconcile: report and stay at the option prompt.
// MATerial, rEconcile: report and stay at the option prompt.
s.echo(format!("-LAYER {other} is not available yet."));
Stage::Option
}
@@ -262,7 +266,7 @@ impl LayerM {
Ok(Step::Continue)
};
match stage {
Stage::Option => Ok(Step::Continue),
Stage::Option | Stage::State(_) => Ok(Step::Continue),
Stage::List => {
self.list(s, text.as_deref().unwrap_or("*"));
Ok(Step::Continue)
@@ -434,9 +438,18 @@ impl Interactive for LayerM {
if enter_is_current { p.default(cur) } else { p }
}
Stage::ConfirmOff(_) => Prompt::new(format!("Really want layer \"{cur}\" (the CURRENT layer) off?"), KW).kw(&["Yes", "No"]).default("N"),
Stage::State(st) => st.prompt(),
}
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
if let Stage::State(st) = &mut self.stage
&& !matches!(i, Input::Cancel)
{
if !st.input(s, &i)? {
self.stage = Stage::Option;
}
return Ok(Step::Continue);
}
match (&self.stage, &i) {
(_, Input::Cancel) => Ok(Step::Cancel),
(Stage::Option, Input::Enter) => Ok(Step::Done),
@@ -0,0 +1,256 @@
//! -LAYER stAte: save, restore, edit, rename, delete and list the drawing's layer states, with
//! AutoCAD 2024's prompts and messages (measured). Save, Restore, Name and Delete run the
//! `layerstate.*` commands; Edit changes the state's mask in place.
use cadcraft_doc::LayerState as LS;
use serde_json::{Value, json};
use super::prompts::{KW, NAME, call, message, retry};
use super::{state_index, valid_name};
use crate::{Input, Prompt, Result, Session};
/// The options after stAte. Import and EXport (layer state files) are not available yet.
const OPTIONS: &[&str] = &["?", "Save", "Restore", "Edit", "Name", "Delete", "Import", "EXport"];
/// "Enter states to change": each keyword, the name AutoCAD 2024 lists it by and its mask bit, in
/// AutoCAD's order.
const TOGGLES: [(&str, &str, u32); 10] = [
("On", "On", LS::ON),
("Frozen", "Frozen", LS::FROZEN),
("Lock", "Lock", LS::LOCKED),
("Plot", "Plot", LS::PLOT),
("Newvpfreeze", "Newvpfreeze", LS::VP_FREEZE_NEW),
("Color", "Color", LS::COLOR),
("lineType", "lineType", LS::LINETYPE),
("lineWeight", "lineWeight", LS::LINEWEIGHT),
("TRansparency", "Transparency", LS::TRANSPARENCY),
("plotStyle", "plotStyle", LS::PLOT_STYLE),
];
/// The options that ask for a saved state's name.
#[derive(Clone, Copy, Debug)]
pub(super) enum Pick {
Restore,
Edit,
Name,
Delete,
}
impl Pick {
fn verb(self) -> &'static str {
match self {
Pick::Restore => "restore",
Pick::Edit => "edit",
Pick::Name => "rename",
Pick::Delete => "delete",
}
}
}
#[derive(Clone, Debug, Default)]
pub(super) enum Stage {
#[default]
Option,
/// Save: the new state's name.
SaveName,
/// Restore, Edit, Name or Delete: the saved state's name.
Pick(Pick),
/// Name: the new name of the state called so.
RenameTo(String),
/// "Enter states to change" for the state `name`: one Save makes on Enter, or one Edit
/// changes (`edit`).
Toggles { name: String, mask: u32, edit: bool },
}
impl Stage {
pub(super) fn prompt(&self) -> Prompt {
match self {
Stage::Option => Prompt::new("Enter an option", KW).kw(OPTIONS),
Stage::SaveName | Stage::RenameTo(_) => Prompt::new("Enter new layer state name", NAME),
Stage::Pick(p) => Prompt::new(format!("Enter name of layer state to {}", p.verb()), NAME).kw(&["?"]),
Stage::Toggles { .. } => Prompt::new("Enter states to change", KW).kw(&TOGGLES.map(|t| t.0)),
}
}
/// One input. `Ok(false)`: back to -LAYER's options. An invalid input leaves the stage as it
/// is, so the prompt is asked again.
pub(super) fn input(&mut self, s: &mut Session, i: &Input) -> Result<bool> {
let text = match i {
Input::Text(t) | Input::Keyword(t) => Some(t.trim().to_string()).filter(|t| !t.is_empty()),
_ => None,
};
let next = match std::mem::take(self) {
Stage::Option => match i {
Input::Enter => return Ok(false),
Input::Keyword(k) => option(s, k),
_ => return Err(retry("Invalid option keyword.")),
},
Stage::SaveName => match text {
None => Stage::Option,
Some(n) => save_name(s, n),
},
Stage::Pick(p) => match (i, text) {
(Input::Keyword(k), _) if k == "?" => {
list(s);
Stage::Pick(p)
}
(_, None) => Stage::Option,
(_, Some(n)) => pick(s, p, &n),
},
Stage::RenameTo(from) => {
if let Some(to) = text {
rename(s, &from, &to);
}
Stage::Option
}
Stage::Toggles { name, mut mask, edit } => match i {
Input::Keyword(k) => {
if let Some(&(_, _, bit)) = TOGGLES.iter().find(|t| t.0 == k) {
mask ^= bit;
}
show(s, mask);
Stage::Toggles { name, mask, edit }
}
Input::Enter => {
finish(s, &name, mask, edit);
Stage::Option
}
_ => {
*self = Stage::Toggles { name, mask, edit };
return Err(retry("Invalid option keyword."));
}
},
};
*self = next;
Ok(true)
}
}
fn option(s: &mut Session, k: &str) -> Stage {
match k {
"?" => {
list(s);
Stage::Option
}
"Save" => Stage::SaveName,
"Restore" => Stage::Pick(Pick::Restore),
"Edit" => Stage::Pick(Pick::Edit),
"Name" => Stage::Pick(Pick::Name),
"Delete" => Stage::Pick(Pick::Delete),
other => {
s.echo(format!("-LAYER stAte {other} is not available yet."));
Stage::Option
}
}
}
/// Whether a saved state has the name `n` in any case.
fn taken(s: &Session, n: &str) -> bool {
s.doc().is_ok_and(|d| d.layer_states.iter().any(|st| st.name.eq_ignore_ascii_case(n)))
}
/// Save's name: refused (asked again) when it has a character AutoCAD 2024 refuses (the layer
/// name ones, measured one by one), is longer than 255 characters (measured 256), or is a saved
/// state's name in any case (measured `s1` after `S1`).
fn save_name(s: &mut Session, n: String) -> Stage {
if !valid_name(&n) {
s.echo(format!("\"{n}\" is an invalid layer state name."));
return Stage::SaveName;
}
if taken(s, &n) {
s.echo(format!("Layer state \"{n}\" already exists."));
return Stage::SaveName;
}
let mask = s.settings.layer_state_mask;
show(s, mask);
Stage::Toggles { name: n, mask, edit: false }
}
fn pick(s: &mut Session, p: Pick, n: &str) -> Stage {
let found = s.doc().ok().and_then(|d| state_index(d, n).and_then(|i| d.layer_states.get(i)).map(|st| (st.name.clone(), st.mask)));
let Some((name, mask)) = found else {
s.echo("Unknown layer state name.");
return Stage::Pick(p);
};
match p {
Pick::Restore => {
run(s, "layerstate.restore", &json!({ "name": name }));
Stage::Option
}
Pick::Delete => {
run(s, "layerstate.delete", &json!({ "name": name }));
Stage::Option
}
Pick::Edit => {
show(s, mask);
Stage::Toggles { name, mask, edit: true }
}
Pick::Name => Stage::RenameTo(name),
}
}
/// Name's new name. A name some state has in any case, the state's own too, is refused with
/// AutoCAD 2024's two lines (measured `S2` onto `S2`, `S1` onto `s1`). A name with a character
/// AutoCAD refuses leaves the state as it is with no message, as AutoCAD does (measured `a,b`,
/// `a<b`); AutoCAD renames to a name starting with "*" as an anonymous `*A1`, and CADCraft leaves
/// that state as it is too.
fn rename(s: &mut Session, from: &str, to: &str) {
if taken(s, to) {
s.echo("Layer state could not be renamed.");
s.echo(format!("{to} already exists."));
} else if valid_name(to) {
run(s, "layerstate.rename", &json!({ "from": from, "to": to }));
}
}
/// Enter at "Enter states to change": Save makes the state with this mask and keeps the toggles
/// for the next Save; Edit sets the state's mask and keeps the bits no toggle reaches (AutoCAD's
/// 65536 after a restore). Edit leaves the next Save's toggles alone (measured).
fn finish(s: &mut Session, name: &str, mask: u32, edit: bool) {
if !edit {
if run(s, "layerstate.save", &json!({ "name": name, "mask": mask & LS::ALL })) {
s.settings.layer_state_mask = mask & LS::ALL;
}
return;
}
// Only a changed mask touches the drawing.
let Ok(d) = s.doc() else { return };
let Some(i) = state_index(d, name).filter(|&i| d.layer_states.get(i).is_some_and(|st| st.mask != mask)) else { return };
if let Ok(d) = s.doc_mut()
&& let Some(st) = d.layer_states.get_mut(i)
{
st.mask = mask;
}
}
/// Run a `layerstate.*` command, reporting a refusal; `true` when it ran.
fn run(s: &mut Session, id: &str, p: &Value) -> bool {
match call(s, id, p) {
Ok(_) => true,
Err(e) => {
s.echo(message(&e));
false
}
}
}
/// The toggles as AutoCAD 2024 lists them before "Enter states to change".
fn show(s: &mut Session, mask: u32) {
s.echo("States");
for (_, label, bit) in TOGGLES {
s.echo(format!("{label:<20}{}", if mask & bit != 0 { "Yes" } else { "No" }));
}
}
/// `?`: every saved state by name without regard to case, as AutoCAD 2024 lists them (measured:
/// `S2`, `b`, `S1` saved in that order list as `b`, `S1`, `S2`; a name starting with "*", its
/// `*A1`, is listed too).
fn list(s: &mut Session) {
let mut names: Vec<String> = s.doc().map(|d| d.layer_states.iter().map(|st| st.name.clone()).collect()).unwrap_or_default();
names.sort_by_cached_key(|n| n.to_ascii_lowercase());
s.echo("Layer state");
s.echo("-".repeat(29));
for n in names {
s.echo(n);
}
}
+2 -2
View File
@@ -101,7 +101,7 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("rename", "Rename...", run_rename)
.menu(&["Format", "Rename..."])
.alias(&["ren", "-rename"])
.params("{table: layer|linetype|style|dimstyle|block|mleaderstyle|tablestyle|view|ucs, from, to}")
.params("{table: layer|linetype|style|dimstyle|block|mleaderstyle|tablestyle|view|ucs|vport, from, to}")
.interactive(|_| Ok(Box::new(rename::RenameM::default()))),
]
}
@@ -995,7 +995,7 @@ fn run_rename(s: &mut Session, p: &Value) -> Result<Value> {
}
"block" => rename::block(s, &from, &to)?,
"mleaderstyle" | "multileaderstyle" => rename::simple(s, "mleaderstyle", &from, &to)?,
"tablestyle" | "view" | "ucs" => rename::simple(s, &table, &from, &to)?,
"tablestyle" | "view" | "ucs" | "vport" => rename::simple(s, &table, &from, &to)?,
"style" | "textstyle" => {
run_style_rename(s, &json!({ "from": from, "to": to }))?;
}
+81 -16
View File
@@ -93,6 +93,8 @@ pub(super) fn simple(s: &mut Session, table: &str, from: &str, to: &str) -> Resu
"tablestyle" => d.table_styles.iter_mut().map(|t| &mut t.name).collect(),
"view" => d.views.iter_mut().map(|t| &mut t.name).collect(),
"ucs" => d.ucss.iter_mut().map(|t| &mut t.name).collect(),
// A saved viewport configuration, every tile of it; never the one shown (`*Active`).
"vport" => d.vports.iter_mut().filter(|v| !v.is_active()).map(|t| &mut t.name).collect(),
_ => return Err(bad("rename", "unsupported table")),
};
if !to.eq_ignore_ascii_case(from) && names.iter().any(|n| n.eq_ignore_ascii_case(&to)) {
@@ -134,35 +136,47 @@ const TYPES: &[(&str, Option<&str>, &str)] = &[
("Plotstyle", None, "plot style"),
("textStyle", Some("style"), "text style"),
("Tablestyle", Some("tablestyle"), "table style"),
("Ucs", Some("ucs"), "UCS"),
("Ucs", Some("ucs"), "ucs"),
("VIew", Some("view"), "view"),
("VPort", None, "viewport configuration"),
("VPort", Some("vport"), "viewport configuration"),
];
/// The noun in "Cannot find …" and "Invalid … name.": AutoCAD 2024 writes "UCS" there, "ucs" in
/// its prompts and in "A ucs named … already exists." (measured).
fn title(noun: &str) -> &str {
if noun == "ucs" { "UCS" } else { noun }
}
/// Keyword-only: spaces separate inputs.
const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
/// A name: Space ends the input.
const NAME: Accept = Accept { number: true, ..Accept::TEXT };
fn any_named<'a>(mut names: impl Iterator<Item = &'a String>, name: &str) -> bool {
names.any(|n| n.eq_ignore_ascii_case(name))
fn any_named<'a>(mut names: impl Iterator<Item = &'a String>, name: &str) -> Option<String> {
names.find(|n| n.eq_ignore_ascii_case(name)).cloned()
}
fn exists(d: &Drawing, table: &str, name: &str) -> bool {
/// The name as the drawing spells it of the `table` entry named `name` (without regard to case).
fn stored(d: &Drawing, table: &str, name: &str) -> Option<String> {
match table {
"block" => d.block(name).is_some(),
"layer" => d.layer(name).is_some(),
"linetype" => d.linetype(name).is_some(),
"style" => d.text_style(name).is_some(),
"dimstyle" => d.dim_style(name).is_some(),
"block" => d.block(name).map(|t| t.name.clone()),
"layer" => d.layer(name).map(|t| t.name.clone()),
"linetype" => d.linetype(name).map(|t| t.name.clone()),
"style" => d.text_style(name).map(|t| t.name.clone()),
"dimstyle" => d.dim_style(name).map(|t| t.name.clone()),
"mleaderstyle" => any_named(d.mleader_styles.iter().map(|t| &t.name), name),
"tablestyle" => any_named(d.table_styles.iter().map(|t| &t.name), name),
"view" => any_named(d.views.iter().map(|t| &t.name), name),
"ucs" => any_named(d.ucss.iter().map(|t| &t.name), name),
_ => true,
"vport" => any_named(d.vports.iter().filter(|v| !v.is_active()).map(|t| &t.name), name),
_ => Some(name.to_string()),
}
}
fn exists(d: &Drawing, table: &str, name: &str) -> bool {
stored(d, table, name).is_some()
}
#[derive(Default)]
enum Stage {
#[default]
@@ -199,6 +213,15 @@ impl Interactive for RenameM {
}
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
// No new name is an invalid one (AutoCAD 2024, measured for layers, blocks, views and
// viewport configurations).
if i == Input::Enter
&& let Stage::New(t, _) = &self.stage
&& let Some((_, Some(_), noun)) = TYPES.get(*t)
{
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
}
if matches!(i, Input::Cancel | Input::Enter) {
return Ok(if i == Input::Cancel { Step::Cancel } else { Step::Done });
}
@@ -217,12 +240,41 @@ impl Interactive for RenameM {
self.stage = Stage::Old(t);
return Ok(Step::Continue);
};
if let Some(table) = table
&& !exists(s.doc()?, table, &name)
{
self.stage = Stage::Old(t);
return Err(EngineError::Other(format!("No {noun} named \"{name}\".")));
// AutoCAD 2024 ends -RENAME on an old name it won't rename (measured): "Invalid … name."
// for a viewport configuration or block whose name starts with "*" (*Active,
// *Model_Space, an anonymous block's *U0) and for linetypes ByLayer and ByBlock;
// "Cannot rename …" and "*Invalid*" for layer 0 and linetype Continuous.
let invalid = match *table {
Some("vport" | "block") => name.starts_with('*'),
Some("linetype") => name.eq_ignore_ascii_case("bylayer") || name.eq_ignore_ascii_case("byblock"),
_ => false,
};
if invalid {
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
}
let fixed = match *table {
Some("layer") => name == "0",
Some("linetype") => name.eq_ignore_ascii_case("continuous"),
_ => false,
};
if fixed {
s.echo(format!("Cannot rename {} \"{name}\".", title(noun)));
s.echo("*Invalid*");
return Ok(Step::Done);
}
// The old name as the drawing spells it: a new name in another case than that is a
// rename, even when it is the old name as typed (AutoCAD 2024, measured).
let name = match table {
Some(table) => match stored(s.doc()?, table, &name) {
Some(n) => n,
None => {
s.echo(format!("Cannot find {} \"{name}\".", title(noun)));
return Ok(Step::Done);
}
},
None => name,
};
self.stage = Stage::New(t, name);
Ok(Step::Continue)
}
@@ -235,6 +287,19 @@ impl Interactive for RenameM {
s.echo(format!("Renaming a {noun} is not available yet."));
return Ok(Step::Done);
};
// AutoCAD 2024's messages, each ending the command (measured).
if !valid_name(&name) {
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
}
if !name.eq_ignore_ascii_case(&old) && exists(s.doc()?, table, &name) {
s.echo(format!("A {noun} named \"{name}\" already exists."));
s.echo("*Invalid*");
return Ok(Step::Done);
}
if name == old {
return Ok(Step::Done);
}
match super::run_rename(s, &json!({ "table": table, "from": old, "to": name })) {
Ok(_) => Ok(Step::Done),
Err(e) => {
+1 -1
View File
@@ -138,7 +138,7 @@ fn save(s: &mut Session, name: &str, window: Option<Bounds2>, snapshot: bool) ->
let layer_state = snapshot.then(|| {
let state = snapshot_name(name);
d.layer_states.retain(|l| !l.name.eq_ignore_ascii_case(&state));
d.layer_states.push(LayerState { name: state.clone(), layers: d.layers.clone() });
d.layer_states.push(LayerState::new(state.clone(), d.layers.clone(), ""));
state
});
if let Some(old) = &replaced {
-6
View File
@@ -156,10 +156,6 @@ pub struct Session {
lisp_last: Option<std::result::Result<lisp::value::Value, String>>,
/// What the last HATCHPICK kept (the Hatch and Gradient dialog's picks).
pub hatch_picks: Option<cmd::hatch::HatchPicks>,
/// The window's menu bar and tool bar as the UI shows them (it reports them every frame).
pub bars_shown: cmd::interface::InterfaceBars,
/// The bars MENUBAR or TOOLBAR asked to change, for the UI to apply.
pub bars_request: cmd::interface::BarsRequest,
/// The object named with a point for the input a prompt picking one object is taking
/// ([`Session::input_object`]): a pick at exactly that point picks that object
/// ([`Session::pick_object`]).
@@ -219,8 +215,6 @@ impl Session {
lisp: lisp::LispState::default(),
lisp_last: None,
hatch_picks: None,
bars_shown: Default::default(),
bars_request: Default::default(),
pick_hint: None,
}
}
+2 -1
View File
@@ -31,7 +31,7 @@ impl Accept {
/// [Truecolor/COlorbook] <BYLAYER>:". A prompt asking for something else besides its keywords has
/// it: "Enter block name or [?]:", "Specify insertion base point or [Basepoint/…]:". Read from
/// AutoCAD's command line over measured runs, where no prompt was written both ways.
const NO_OR: [&str; 28] = [
const NO_OR: &[&str] = &[
"Bring to front",
"Calculate rectangle dimensions based on",
"Choose mode for selected object conversion",
@@ -50,6 +50,7 @@ const NO_OR: [&str; 28] = [
"Enter option",
"Enter polyline linetype generation option",
"Enter property to change",
"Enter states to change",
"Enter the type of array",
"Enter type of unused objects to purge",
"Enter viewport arrangement",
+5
View File
@@ -27,6 +27,10 @@ pub struct Settings {
pub measureinit: bool,
/// -VIEW sEttings > Layer snapshot: named views save the layer settings with them.
pub view_layer_snapshot: bool,
/// -LAYER stAte Save: the properties a new layer state restores (its mask), as the last Save
/// left them. AutoCAD 2024 keeps these toggles in the registry from one Save to the next
/// (measured); Edit doesn't change them.
pub layer_state_mask: u32,
pub dynmode: bool,
/// DYNDIGRIP: which dimensions grip dimensional input shows while a grip is stretched (bits:
/// 1 resulting length, 2 length change, 4 absolute angle, 8 angle change, 16 radius); read
@@ -148,6 +152,7 @@ impl Default for Settings {
zoomfactor: 60,
measureinit: false,
view_layer_snapshot: true,
layer_state_mask: cadcraft_doc::LayerState::ALL,
dynmode: true,
dyndigrip: 31,
dyndivis: 1,
+202
View File
@@ -0,0 +1,202 @@
//! The Key point option of a base point: ARRAYRECT, ARRAYPOLAR and ARRAYEDIT (Base point and
//! REPlace) take the source objects' key point (an end point, midpoint, centre…) nearest the
//! picked point as the base point; the JSON forms take `keyPoint`.
use cadcraft_engine::Session;
use cadcraft_engine::doc::{ArrayKind, ArrayParams, EntityKind, Handle};
use cadcraft_engine::geom::Vec2;
use serde_json::json;
fn source_line(s: &mut Session) -> String {
let r = s.execute("line", &json!({"points": [[0, 0], [2, 1]]})).unwrap();
r["handle"].as_str().or_else(|| r["handles"][0].as_str()).unwrap().to_string()
}
fn handle(v: &serde_json::Value) -> Handle {
Handle::parse_hex(v["handle"].as_str().unwrap()).unwrap()
}
/// The array's insertion point (its base point) and parameters.
fn array(s: &Session, h: Handle) -> (Vec2, ArrayParams) {
let d = s.doc().unwrap();
let e = d.entity(h).unwrap();
let EntityKind::Insert(i) = &e.kind else { panic!("not an array") };
(i.insert.xy(), d.array_params(e).unwrap())
}
fn only_array(s: &Session) -> Handle {
let d = s.doc().unwrap();
let arrays: Vec<Handle> = d.model.iter().filter(|e| d.array_params(e).is_some()).map(|e| e.handle).collect();
assert_eq!(arrays.len(), 1);
arrays[0]
}
fn typed(s: &mut Session, inputs: &[&str]) {
for t in inputs {
s.cmdline(t).unwrap();
}
}
#[test]
fn arrayrect_and_arraypolar_take_a_key_point_as_the_base_point() {
let mut s = Session::new();
let l = source_line(&mut s);
let r = s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "keyPoint": [1.9, 1.05]})).unwrap();
assert!(array(&s, handle(&r)).0.near(Vec2::new(2.0, 1.0), 1e-9));
let mut s = Session::new();
let l = source_line(&mut s);
let r = s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 4, "keyPoint": [1.1, 0.4]})).unwrap();
assert!(array(&s, handle(&r)).0.near(Vec2::new(1.0, 0.5), 1e-9), "the line's midpoint");
}
#[test]
fn typed_key_points_at_arrayrect_and_arraypolar() {
let mut s = Session::new();
source_line(&mut s);
typed(&mut s, &["arrayrect", "l", "", "b", "k", "1.9,0.95", "x"]);
assert!(array(&s, only_array(&s)).0.near(Vec2::new(2.0, 1.0), 1e-9));
// Enter at the key point prompt goes back to the base point prompt.
let mut s = Session::new();
source_line(&mut s);
typed(&mut s, &["arraypolar", "l", "", "b", "k"]);
assert!(s.current_prompt().unwrap().message.contains("key point"));
typed(&mut s, &[""]);
assert!(s.current_prompt().unwrap().message.contains("base point"));
typed(&mut s, &["k", "0.1,0.1", "-10,0", "x"]);
assert!(array(&s, only_array(&s)).0.near(Vec2::new(0.0, 0.0), 1e-9));
}
#[test]
fn arrayedit_moves_the_base_point_to_a_key_point_of_an_item() {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
// Near the start of the third item: the base point goes to (10, 0), the items stay.
s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [10.2, 0.05]})).unwrap();
let (at, p) = array(&s, h);
assert!(at.near(Vec2::new(10.0, 0.0), 1e-9), "{at:?}");
assert!(matches!(p.kind, ArrayKind::Rect(r) if r.cols == 3 && r.col_spacing == 5.0));
let items = s.execute("explode", &json!({"handles": [h.hex()]})).unwrap();
assert!(items.to_string().len() > 2);
let d = s.doc().unwrap();
let mut starts: Vec<(i64, i64)> = d
.model
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Line(l) => Some(((l.a.x * 10.0).round() as i64, (l.a.y * 10.0).round() as i64)),
_ => None,
})
.collect();
starts.sort();
assert_eq!(starts, [(0, 0), (50, 0), (100, 0)]);
// Not on an item: refused.
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [3.5, 40]})).is_err());
assert!(array(&s, h).0.near(Vec2::ZERO, 1e-9));
// Typed: Base point, Key point, a point on the second item near its end.
s.set_selection(vec![h]);
typed(&mut s, &["arrayedit", "b", "k", "6.9,0.9", "x"]);
assert!(array(&s, h).0.near(Vec2::new(7.0, 1.0), 1e-9));
}
#[test]
fn replacement_objects_take_a_key_point_as_their_base_point() {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
let c = s.execute("circle", &json!({"center": [50, 50], "radius": 1})).unwrap()["handle"].clone();
// The circle's right quadrant is the base point: on item 1 (at x = 5) its centre is at x = 4.
s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [c], "keyPoint": [51.2, 50.1], "items": [[1, 0, 0]]}})).unwrap();
s.execute("explode", &json!({"handles": [h.hex()]})).unwrap();
let d = s.doc().unwrap();
// The replaced item stays a reference to the replacement block.
let centres: Vec<Vec2> = d
.model
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Insert(i) => d.block(&i.block).map(|b| (i.transform(b.base.xy()), b)),
_ => None,
})
.flat_map(|(m, b)| {
b.entities
.iter()
.filter_map(move |e| match &e.kind {
EntityKind::Circle(c) => Some(m.apply(c.center.xy())),
_ => None,
})
.collect::<Vec<_>>()
})
.collect();
assert!(centres.iter().any(|c| c.near(Vec2::new(4.0, 0.0), 1e-9)), "{centres:?}");
}
#[test]
fn hostile_key_points_never_panic() {
let mut s = Session::new();
let l = source_line(&mut s);
for kp in [json!(["a", 1]), json!([1e308, -1e308]), json!([]), json!("x"), json!(null)] {
let _ = s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "keyPoint": kp}));
let _ = s.execute("arraypolar", &json!({"handles": [l], "center": [5, 5], "count": 3, "keyPoint": kp}));
}
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
for kp in [json!([1e308, 1e308]), json!([-1e308, 0]), json!(["x"]), json!([0.5, 0.25])] {
let _ = s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": kp}));
let _ = s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [], "keyPoint": kp, "items": [[0, 0, 0]]}}));
}
// Typed key points far away or on nothing are refused without leaving the command broken.
s.set_selection(vec![h]);
typed(&mut s, &["arrayedit", "b", "k"]);
assert!(s.cmdline("1e300,1e300").is_err() || s.running.is_some());
s.cancel();
}
/// A `keyPoint` that is there but isn't a point is refused, not taken as no key point (which
/// would make the array at another base point).
#[test]
fn a_key_point_that_is_not_a_point_is_refused() {
let mut s = Session::new();
let l = source_line(&mut s);
assert!(s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "keyPoint": ["bad", 1]})).is_err());
assert!(s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 3, "keyPoint": "x"})).is_err());
assert!(s.doc().unwrap().model.iter().all(|e| s.doc().unwrap().array_params(e).is_none()), "no array made");
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [1]})).is_err());
let c = s.execute("circle", &json!({"center": [50, 50], "radius": 1})).unwrap()["handle"].clone();
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [c], "keyPoint": {}, "items": [[1, 0, 0]]}})).is_err());
}
/// More objects than the key point search takes are refused rather than searched in part, which
/// could miss the nearest key point.
#[test]
fn a_key_point_of_too_many_objects_is_refused() {
let mut s = Session::new();
// 10,001 lines; the last one ends nearest the key point.
let pts: Vec<[f64; 2]> = (0..10_002).map(|i| [f64::from(i), 0.0]).collect();
let r = s.execute("line", &json!({ "points": pts })).unwrap();
let hs: Vec<String> = s.doc().unwrap().model.iter().map(|e| e.handle.hex()).collect();
assert_eq!(hs.len(), 10_001, "{r}");
let e = s.execute("arraypolar", &json!({"handles": hs, "center": [0, -50], "count": 2, "keyPoint": [10_001.2, 0]})).unwrap_err();
assert!(e.to_string().contains("10000"), "{e}");
}
/// ARRAYEDIT with a new base point (`base` or `keyPoint`) and a polar `center` in one call puts the
/// centre where asked: the base point moves the array's insertion point, so the centre is read in
/// the array's placement after that move.
#[test]
fn arrayedit_center_with_a_new_base_point_lands_where_asked() {
for (key, at) in [("base", json!([2, 1])), ("keyPoint", json!([1.95, 0.99]))] {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 4, "base": [0, 0]})).unwrap());
s.execute("arrayedit", &json!({"handle": h.hex(), key: at, "center": [5, 0]})).unwrap();
let (ins, p) = array(&s, h);
let ArrayKind::Polar(k) = p.kind else { panic!("not polar") };
assert!(ins.near(Vec2::new(2.0, 1.0), 1e-9), "{key}: {ins:?}");
// The centre is kept relative to the insertion point.
assert!((ins + k.center).near(Vec2::new(5.0, 0.0), 1e-9), "{key}: centre at {:?}", ins + k.center);
}
}
+43 -4
View File
@@ -83,14 +83,22 @@ fn dash_attedit_one_at_a_time_edits_the_selected_attributes() {
let mut s = with_block();
let h = handle(&insert(&mut s, 100.0, json!({"T": "abc"})));
type_lines(&mut s, &["-attedit", "y", "", "T", "", "105,0", ""]);
assert!(s.prompt_text().contains("[Value/Layer/Color/Next] <N>"), "{}", s.prompt_text());
// Unsupported options say so and keep the prompt.
s.cmdline("p").unwrap();
assert!(s.log.iter().any(|l| l.contains("Position is not available yet")), "{:?}", s.log);
assert!(s.prompt_text().contains("[Value/Position/Height/Angle/Style/Layer/Color/Next] <N>"), "{}", s.prompt_text());
// Edit Position, Height, Angle, and Style
type_lines(&mut s, &["p", "10,20", "h", "2.5", "a", "45", "s", "Standard"]);
// Edit Value: change and replace
type_lines(&mut s, &["v", "c", "b", "B", "v", "r", "replaced value", "n"]);
assert!(s.running.is_none(), "{}", s.prompt_text());
assert_eq!(value(&s, h, "T"), "replaced value");
assert_eq!(value(&s, h, "U"), "u");
let EntityKind::Insert(ins) = &s.doc().unwrap().entity(h).unwrap().kind else { panic!("not an insert") };
let att = ins.attribs.iter().find(|a| a.tag == "T").unwrap();
assert!((att.text.insert.x - 10.0).abs() < 1e-6);
assert!((att.text.insert.y - 20.0).abs() < 1e-6);
assert!((att.text.height - 2.5).abs() < 1e-6);
assert!((att.text.rotation.to_degrees() - 45.0).abs() < 1e-4);
assert_eq!(att.text.style, "Standard");
}
#[test]
@@ -109,3 +117,34 @@ fn attribute_tags_match_in_any_case_and_unknown_tags_are_reported() {
let r = s.execute("attedit", &json!({"handle": h.hex(), "values": {"T": "four"}})).unwrap();
assert_eq!(r, json!({"changed": 1}));
}
/// -ATTEDIT Position moves an aligned or fit attribute without losing its baseline: both of its
/// points move by the same offset (setting both to the picked point would leave no direction or
/// length to fit the text between).
#[test]
fn dash_attedit_position_keeps_an_aligned_attributes_baseline() {
use cadcraft_doc::HAlign;
use cadcraft_geom::Vec3;
for halign in [HAlign::Aligned, HAlign::Fit] {
let mut s = with_block();
let h = handle(&insert(&mut s, 100.0, json!({"T": "abc"})));
s.doc_mut()
.unwrap()
.modify_entity(h, |e| {
if let EntityKind::Insert(i) = &mut e.kind {
for a in i.attribs.iter_mut().filter(|a| a.tag == "T") {
a.text.halign = halign;
a.text.insert = Vec3::new(100.0, 1.0, 0.0);
a.text.align_pt = Some(Vec3::new(104.0, 1.0, 0.0));
}
}
})
.unwrap();
type_lines(&mut s, &["-attedit", "y", "", "T", "", "105,0", "", "p", "10,20", "n"]);
assert!(s.running.is_none(), "{}", s.prompt_text());
let EntityKind::Insert(ins) = &s.doc().unwrap().entity(h).unwrap().kind else { panic!("not an insert") };
let t = &ins.attribs.iter().find(|a| a.tag == "T").unwrap().text;
assert!(t.insert.xy().near(cadcraft_geom::Vec2::new(10.0, 20.0), 1e-9), "{halign:?}: {:?}", t.insert);
assert!(t.align_pt.is_some_and(|p| p.xy().near(cadcraft_geom::Vec2::new(14.0, 20.0), 1e-9)), "{halign:?}: {:?}", t.align_pt);
}
}
+1 -1
View File
@@ -38,7 +38,7 @@ fn dash_attedit_sets_layer_and_colour_of_one_attribute() {
for t in ["-attedit", "y", "", "T", "", "105,0", ""] {
s.cmdline(t).unwrap();
}
assert!(s.prompt_text().contains("[Value/Layer/Color/Next] <N>"), "{}", s.prompt_text());
assert!(s.prompt_text().contains("[Value/Position/Height/Angle/Style/Layer/Color/Next] <N>"), "{}", s.prompt_text());
s.cmdline("l").unwrap();
assert!(s.prompt_text().contains("Enter new layer name <0>"), "{}", s.prompt_text());
// An unknown layer is refused and asked again.
@@ -0,0 +1,247 @@
//! -LAYER stAte: AutoCAD 2024's layer state prompts and messages (measured with accoreconsole on a
//! drawing with layers A, red, and B), and the `layerstate.*` commands they run.
use cadcraft_engine::doc::LayerState;
use cadcraft_engine::{Input, Session};
use serde_json::json;
const LABELS: [&str; 10] = ["On", "Frozen", "Lock", "Plot", "Newvpfreeze", "Color", "lineType", "lineWeight", "Transparency", "plotStyle"];
/// The toggles AutoCAD lists before "Enter states to change", with `no` the ones set to No.
fn table(no: &[&str]) -> Vec<String> {
let mut v = vec!["States".to_string()];
v.extend(LABELS.iter().map(|l| format!("{l:<20}{}", if no.contains(l) { "No" } else { "Yes" })));
v
}
/// Layers A (red) and B; the current layer stays 0.
fn drawing() -> Session {
let mut s = Session::new();
s.script("-LAYER N A,B C 1 A\n\n").unwrap();
s
}
/// Run `script` to its end and return what it wrote besides the commands' names and -LAYER's
/// "Current layer" line.
fn run(s: &mut Session, script: &str) -> Vec<String> {
let at = s.log.len();
s.script(script).unwrap();
assert!(s.running.is_none(), "{script:?} ends at: {}", s.prompt_text());
s.log[at..].iter().filter(|l| !l.starts_with("Command: ") && !l.starts_with("Current layer:")).cloned().collect()
}
fn states(s: &Session) -> Vec<(String, u32)> {
s.doc().unwrap().layer_states.iter().map(|st| (st.name.clone(), st.mask)).collect()
}
fn state(name: &str, mask: u32) -> (String, u32) {
(name.to_string(), mask)
}
#[test]
fn save_asks_the_states_and_remembers_them_for_the_next_save() {
let mut s = drawing();
// Each toggle lists the states again; On off is AutoCAD's 2046.
let out = run(&mut s, "-LAYER A S S6 ON\n\n\n\nLINE 0,0 1,0\n\n");
assert_eq!(out, [table(&[]), table(&["On"])].concat());
assert_eq!(states(&s), [state("S6", 2046)]);
assert_eq!(s.doc().unwrap().model.len(), 1, "the next command runs");
// The next Save starts from the toggles the last one left: On alone is 513, then every
// toggle once more is 2046 (AutoCAD's S7 and S8).
let out = run(&mut s, "-LAYER A S S7 ON F L P N C T W TR S\n\n\n\n");
assert_eq!(out[..11], table(&["On"]));
assert_eq!(
out[out.len() - 11..],
table(&["Frozen", "Lock", "Plot", "Newvpfreeze", "Color", "lineType", "lineWeight", "Transparency", "plotStyle"])
);
run(&mut s, "-LAYER A S S8 ON F L P N C T W TR S\n\n\n\n");
run(&mut s, "-LAYER A S S9 ON\n\n\n\n");
assert_eq!(states(&s)[1..], [state("S7", 513), state("S8", 2046), state("S9", LayerState::ALL)]);
// Edit lists and changes the state's own mask (found in any case), not the next Save's
// toggles (AutoCAD: Edit S1 to 2015, then S2 is 2047).
let out = run(&mut s, "-LAYER A E s6 ON C\n\n\n\n");
assert_eq!(out, [table(&["On"]), table(&[]), table(&["Color"])].concat());
run(&mut s, "-LAYER A S S10\n\n\n\n");
assert_eq!(states(&s)[0], state("S6", 2015));
assert_eq!(states(&s)[4], state("S10", LayerState::ALL));
// Each -LAYER is one undo step.
s.undo().unwrap();
assert_eq!(states(&s).len(), 4);
s.undo().unwrap();
assert_eq!(states(&s)[0], state("S6", 2046));
// A state from AutoCAD after a restore (mask 67583 = 2047 + 65536) named as AutoCAD names a
// state renamed to "*X": `?` lists it, and Edit keeps the bit no toggle reaches.
s.doc_mut().unwrap().layer_states.push(LayerState { name: "*A1".into(), mask: 67583, ..LayerState::default() });
assert_eq!(
run(
&mut s,
"-LAYER A ?
"
)[2],
"*A1"
);
run(
&mut s,
"-LAYER A E *a1 C
",
);
assert_eq!(states(&s)[4], state("*A1", 67583 - 32));
}
#[test]
fn names_follow_autocads_rules_and_messages() {
let mut s = drawing();
run(&mut s, "-LAYER A S S1\n\n\n\n");
// A saved name in another case is refused and asked again.
let out = run(&mut s, "-LAYER A S s1 S2\n\n\n\n");
assert_eq!(out, [vec!["Layer state \"s1\" already exists.".to_string()], table(&[])].concat());
// The layer name characters, and more than 255 characters, are refused; Enter goes back.
let long = "y".repeat(256);
let out = run(&mut s, &format!("-LAYER A S *X a<b a,b {long}\n\n\n\n"));
assert_eq!(
out,
[
"\"*X\" is an invalid layer state name.",
"\"a<b\" is an invalid layer state name.",
"\"a,b\" is an invalid layer state name.",
&format!("\"{long}\" is an invalid layer state name.")
]
);
run(&mut s, &format!("-LAYER A S {}\n\n\n\n", "x".repeat(255)));
assert_eq!(states(&s).len(), 3);
run(&mut s, &format!("-LAYER A D {}\n\n\n", "x".repeat(255)));
// `?` lists by name without regard to case.
run(&mut s, "-LAYER A S b\n\n\n\n");
let list = ["Layer state", "-----------------------------", "b", "S1", "S2"];
assert_eq!(run(&mut s, "-LAYER A ?\n\n\n"), list);
// Each name prompt lists on `?`, says an unknown name and asks again, and Enter goes back.
let out = run(&mut s, "-LAYER A R ? NOSUCH\n\nE NOSUCH\n\nN NOSUCH\n\nD NOSUCH\n\n\n\n");
assert_eq!(out[..5], list);
assert_eq!(out[5..], ["Unknown layer state name."; 4]);
// Unknown options, Import and EXport.
let out = run(&mut s, "-LAYER A XYZ I EX\n\n\n");
assert_eq!(out, ["Invalid option keyword.", "-LAYER stAte Import is not available yet.", "-LAYER stAte EXport is not available yet."]);
let out = run(&mut s, "-LAYER A S T1 XYZ\n\n\n\n");
assert_eq!(out, [table(&[]), vec!["Invalid option keyword.".to_string()]].concat());
assert_eq!(states(&s).len(), 4, "T1 is saved after the invalid toggle");
run(&mut s, "-LAYER A D T1\n\n\n");
// Name: a name some state has in any case, the state's own too, is refused with two lines.
assert_eq!(run(&mut s, "-LAYER A N S1 S2\n\n\n"), ["Layer state could not be renamed.", "S2 already exists."]);
assert_eq!(run(&mut s, "-LAYER A N S1 s1\n\n\n"), ["Layer state could not be renamed.", "s1 already exists."]);
// A name with a refused character leaves the state as it is, with no message; Enter too.
assert!(run(&mut s, "-LAYER A N S1 a,b\n\n\n").is_empty());
assert!(run(&mut s, "-LAYER A N S1\n\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S1", "S2", "b"]);
// The old name in another case.
assert!(run(&mut s, "-LAYER A N s1 S9\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S9", "S2", "b"]);
assert!(run(&mut s, "-LAYER A D s9\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S2", "b"]);
}
#[test]
fn esc_drops_the_state_being_saved_and_undo_takes_back_name_and_delete() {
let mut s = drawing();
run(
&mut s,
"-LAYER A S S1
",
);
// Esc at the toggles: that state isn't saved and the next Save's toggles stay as they were;
// what the same -LAYER did before Esc stays, as for the other -LAYER options.
s.script(
"-LAYER A S S2
S S3 C ON
",
)
.unwrap();
// AutoCAD 2024 asks for the toggles without "or" before them.
assert_eq!(
s.current_prompt().unwrap().display(),
"Enter states to change [On/Frozen/Lock/Plot/Newvpfreeze/Color/lineType/lineWeight/TRansparency/plotStyle]:"
);
s.input(Input::Cancel).unwrap();
assert!(s.running.is_none());
assert_eq!(states(&s), [state("S1", LayerState::ALL), state("S2", LayerState::ALL)]);
assert_eq!(s.settings.layer_state_mask, LayerState::ALL);
// Name and Delete are one undo step each, like Save.
run(
&mut s,
"-LAYER A N S1 S9
",
);
run(
&mut s,
"-LAYER A D S2
",
);
assert_eq!(states(&s), [state("S9", LayerState::ALL)]);
s.undo().unwrap();
assert_eq!(states(&s), [state("S9", LayerState::ALL), state("S2", LayerState::ALL)]);
s.undo().unwrap();
assert_eq!(states(&s), [state("S1", LayerState::ALL), state("S2", LayerState::ALL)]);
}
#[test]
fn restore_finds_the_state_in_any_case() {
let mut s = drawing();
run(&mut s, "-LAYER A S S1\n\n\n\n");
run(&mut s, "-LAYER C 3 A M C\n\n");
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.header.str("CLAYER", "0")), (cadcraft_color::Color::Index(3), "C".to_string()));
assert!(run(&mut s, "-LAYER A R s1\n\n\n").is_empty());
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.header.str("CLAYER", "0")), (cadcraft_color::Color::Index(1), "0".to_string()));
}
#[test]
fn json_layer_states_take_a_mask_and_find_names_in_any_case() {
let mut s = drawing();
s.execute("layerstate.save", &json!({ "name": "M" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "On", "mask": LayerState::ON })).unwrap();
for bad in [json!(4096), json!(-1), json!(1.5), json!("1")] {
assert!(s.execute("layerstate.save", &json!({ "name": "X", "mask": bad })).is_err(), "{bad}");
}
assert_eq!(states(&s), [state("M", LayerState::ALL), state("On", 513)]);
// Restore, Rename and Delete find a name in another case; a name another state has in any
// case is refused, the state's own in another case too.
s.execute("layer.set", &json!({ "name": "A", "color": "3" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "m" })).unwrap();
assert_eq!(s.doc().unwrap().layer("A").unwrap().color, cadcraft_color::Color::Index(1));
assert!(s.execute("layerstate.rename", &json!({ "from": "m", "to": "ON" })).is_err());
assert!(s.execute("layerstate.rename", &json!({ "from": "m", "to": "m" })).is_err());
s.execute("layerstate.rename", &json!({ "from": "m", "to": "M2" })).unwrap();
s.execute("layerstate.delete", &json!({ "name": "on" })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
// A name -LAYER stAte Save refuses is refused here too, and nothing is saved.
let long = "x".repeat(256);
for name in ["", " ", "a<b", "a\nb", long.as_str()] {
assert!(s.execute("layerstate.save", &json!({ "name": name })).is_err(), "{name:?}");
}
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
// Save onto a name another state has in another case replaces that state, as one spelled the
// same: AutoCAD 2024 keeps one state per name in any case.
s.execute("layerstate.save", &json!({ "name": "m2", "mask": LayerState::ON })).unwrap();
assert_eq!(states(&s), [state("m2", 513)]);
// Names that differ only in case (CADCraft's own record keeps the second of them, which AutoCAD
// 2024 doesn't see): Save and Delete take the one spelled so, though the other comes first, and
// leave the other.
s.doc_mut().unwrap().layer_states.insert(0, LayerState::new("M2", Vec::new(), ""));
s.execute("layerstate.save", &json!({ "name": "m2", "mask": LayerState::ON | LayerState::FROZEN })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL), state("m2", 515)]);
s.execute("layerstate.delete", &json!({ "name": "m2" })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
}
+2
View File
@@ -4,6 +4,7 @@ mod annotate_options;
mod annotative;
mod arc_ctrl_direction;
mod array_commands;
mod array_key_point;
mod assoc_array;
mod attdef_command;
mod attdisp_attsync;
@@ -78,6 +79,7 @@ mod join_close;
mod json_param_validation;
mod layer_cmdline;
mod layer_merge_delete;
mod layer_state_cmdline;
mod layoff_repeat;
mod layout_prompts;
mod leader_command;
+128 -6
View File
@@ -76,13 +76,135 @@ fn rename_prompts_type_old_and_new_name() {
assert!(d.block("Pump").is_some() && d.layer("New").is_some() && d.layer("Old").is_none(), "{:?}", s.log);
assert_eq!(insert_targets(d), ["Assy", "Pump", "Pump", "Pump"]);
assert_eq!(d.model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 1);
// An unknown old name re-prompts; a type CADCraft lacks reads both names and reports.
s.script("-RENAME LA Missing\nNew\nNewer\n").unwrap();
assert!(s.running.is_none(), "{}", s.prompt_text());
assert!(s.doc().unwrap().layer("Newer").is_some());
// A type CADCraft lacks reads both names and reports.
let n = s.log.len();
s.script("-RENAME VP a b\nLINE 0,0 2,0\n\n").unwrap();
s.script("-RENAME M a b\nLINE 0,0 2,0\n\n").unwrap();
assert!(s.running.is_none(), "{}", s.prompt_text());
assert!(s.log[n..].iter().any(|l| l.contains("not available yet")), "{:?}", &s.log[n..]);
assert!(s.log[n..].iter().any(|l| l.contains("Renaming a material is not available yet.")), "{:?}", &s.log[n..]);
assert_eq!(s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 2);
}
/// What `script` adds to the log; the command has ended.
fn said(s: &mut Session, script: &str) -> Vec<String> {
let n = s.log.len();
s.script(script).unwrap();
assert!(s.running.is_none(), "{script}: {}", s.prompt_text());
s.log[n..].to_vec()
}
fn says(log: &[String], text: &str) -> bool {
log.iter().any(|l| l.contains(text))
}
#[test]
fn rename_ends_on_a_name_it_cannot_take_with_autocads_messages() {
// AutoCAD 2024 (accoreconsole, measured, the same for blocks, dimension styles, layers,
// linetypes, text styles, UCSs and views): `Cannot find layer "X".` for an old name that
// doesn't exist, `A layer named "X" already exists.` and `*Invalid*` for a new name that does,
// `Invalid layer name.` for one it can't take; each ends the command.
let mut s = drawing();
for name in ["A1", "A2"] {
s.execute("layer.new", &json!({ "name": name })).unwrap();
}
let log = said(&mut s, "-RENAME LA NOSUCH\nLINE 0,0 3,0\n\n");
assert!(says(&log, "Cannot find layer \"NOSUCH\"."), "{log:?}");
// The command ended there: the next input started LINE.
assert_eq!(s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 1);
let log = said(&mut s, "-RENAME LA A1 A2\n");
assert!(says(&log, "A layer named \"A2\" already exists.") && says(&log, "*Invalid*"), "{log:?}");
let log = said(&mut s, "-RENAME LA A1 X<Y\n");
assert!(says(&log, "Invalid layer name."), "{log:?}");
// No new name at all is an invalid one too.
s.cmdline("-RENAME LA A1").unwrap();
let n = s.log.len();
s.cmdline("").unwrap();
assert!(s.running.is_none() && says(&s.log[n..], "Invalid layer name."), "{:?}", &s.log[n..]);
assert!(s.doc().unwrap().layer("A1").is_some());
said(&mut s, "-RENAME LA A1 B1\n");
assert!(s.doc().unwrap().layer("B1").is_some() && s.doc().unwrap().layer("A1").is_none());
// The old name in another case than stored, and the new name as typed: a rename to that case
// (AutoCAD 2024, measured: LAY1 typed lay1, new name lay1, gives lay1).
said(&mut s, "-RENAME LA b1 b1\n");
assert!(s.doc().unwrap().layers.iter().any(|l| l.name == "b1"));
// Old names AutoCAD 2024 won't rename (measured), each ending the command before the new name.
let lines = |s: &Session| s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count();
for (script, message) in [
("-RENAME LA 0\n", "Cannot rename layer \"0\"."),
("-RENAME LT continuous\n", "Cannot rename linetype \"continuous\"."),
("-RENAME LT ByLayer\n", "Invalid linetype name."),
("-RENAME LT byblock\n", "Invalid linetype name."),
("-RENAME LT CONTINUOUS\n", "Cannot rename linetype \"CONTINUOUS\"."),
("-RENAME B *Model_Space\n", "Invalid block name."),
("-RENAME B *U1\n", "Invalid block name."),
] {
let n = lines(&s);
let log = said(&mut s, &format!("{script}LINE 0,0 4,0\n\n"));
assert!(says(&log, message), "{script}: {log:?}");
assert_eq!(says(&log, "*Invalid*"), message.starts_with("Cannot"), "{script}: {log:?}");
assert_eq!(lines(&s), n + 1, "{script}: the next input starts a command");
}
// A UCS is "ucs" in the prompts and in "A ucs named", "UCS" in the other two.
for name in ["U1", "U2"] {
let ucs = cadcraft_engine::doc::Ucs { name: name.into(), origin: Default::default(), x_axis: Default::default(), y_axis: Default::default() };
s.doc_mut().unwrap().ucss.push(ucs);
}
s.cmdline("-RENAME U").unwrap();
assert!(s.prompt_text().contains("Enter old ucs name"), "{}", s.prompt_text());
s.cancel();
assert!(says(&said(&mut s, "-RENAME U NOSUCH\n"), "Cannot find UCS \"NOSUCH\"."));
assert!(says(&said(&mut s, "-RENAME U U1 U2\n"), "A ucs named \"U2\" already exists."));
assert!(says(&said(&mut s, "-RENAME U U1 X<Y\n"), "Invalid UCS name."));
}
#[test]
fn rename_takes_a_saved_viewport_configuration() {
// AutoCAD 2024 (measured): -RENAME VPort renames a saved configuration, every tile of it, old
// name in any case, and to another case of its own name; "*ACTIVE" (old or new), names with
// characters AutoCAD refuses and names already used are refused as for the other types.
let mut s = Session::new();
s.execute("-vports", &json!({ "option": "2", "arrangement": "vertical" })).unwrap();
s.execute("-vports", &json!({ "option": "save", "name": "CFG1" })).unwrap();
s.execute("-vports", &json!({ "option": "save", "name": "CFG3" })).unwrap();
let names = |s: &Session| -> Vec<(String, usize)> { s.doc().unwrap().vports.iter().map(|v| (v.name.clone(), v.tiles.len())).collect() };
said(&mut s, "-RENAME VP cfg1 CFG2\n");
assert_eq!(names(&s), [("*Active".to_string(), 2), ("CFG2".to_string(), 2), ("CFG3".to_string(), 2)]);
for (script, message) in [
// A refused old name ends the command before the new name is asked.
("-RENAME VP NOSUCH\n", "Cannot find viewport configuration \"NOSUCH\"."),
("-RENAME VP *ACTIVE\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 *ACTIVE\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 A<B\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 CFG3\n", "A viewport configuration named \"CFG3\" already exists."),
] {
let log = said(&mut s, script);
assert!(says(&log, message), "{script}: {log:?}");
// "*Invalid*" follows a name already used only.
assert_eq!(says(&log, "*Invalid*"), message.ends_with("already exists."), "{script}: {log:?}");
}
// No new name at all is an invalid one too (measured: CFG1, then Enter).
s.cmdline("-RENAME VP CFG2").unwrap();
let n = s.log.len();
s.cmdline("").unwrap();
assert!(s.running.is_none() && says(&s.log[n..], "Invalid viewport configuration name."), "{:?}", &s.log[n..]);
assert_eq!(names(&s), [("*Active".to_string(), 2), ("CFG2".to_string(), 2), ("CFG3".to_string(), 2)]);
said(&mut s, "-RENAME VP CFG2 cfg2\n");
assert_eq!(names(&s), [("*Active".to_string(), 2), ("cfg2".to_string(), 2), ("CFG3".to_string(), 2)]);
// The new name is compared with the stored one, not with the old name as typed (measured:
// CFG1 typed cfg1 to cfg1 gives cfg1; typed cfg1 to CFG1 changes nothing).
said(&mut s, "-RENAME VP CFG2 CFG2\n");
assert_eq!(names(&s)[1].0, "CFG2");
said(&mut s, "-RENAME VP cfg2 CFG2\n");
assert_eq!(names(&s)[1].0, "CFG2");
said(&mut s, "-RENAME VP cfg2 cfg2\n");
assert_eq!(names(&s)[1].0, "cfg2");
// The JSON form too, which never takes the configuration shown, and refuses a name already
// used (in any case) or with a character AutoCAD refuses, as for the other tables.
s.execute("rename", &json!({ "table": "vport", "from": "CFG3", "to": "Pair" })).unwrap();
assert_eq!(names(&s)[2].0, "Pair");
for to in ["Shown", "CFG2", "A<B"] {
let from = if to == "Shown" { "*Active" } else { "Pair" };
assert!(s.execute("rename", &json!({ "table": "vport", "from": from, "to": to })).is_err(), "{from} to {to}");
}
s.execute("rename", &json!({ "table": "vport", "from": "pair", "to": "PAIR" })).unwrap();
assert_eq!(names(&s), [("*Active".to_string(), 2), ("cfg2".to_string(), 2), ("PAIR".to_string(), 2)]);
}
+294
View File
@@ -0,0 +1,294 @@
//! Saved layer states as AutoCAD keeps them: the LAYER table's extension dictionary holds an
//! `ACAD_LAYERSTATES` dictionary of one XRECORD per state. Measured in AutoCAD 2024 (DXFOUT of
//! states saved with -LAYER stAte), an XRECORD holds `280 1`, the mask (91), a text (301: empty
//! as -LAYER saves it; AutoCAD keeps one a file holds through restore and DXFOUT), `290 0` and
//! the current layer's name (302), then for each layer its LAYER handle (330),
//! flags (90: 1 off, 2 frozen, 4 locked, 8 plotted, 16 frozen in new viewports), colour index
//! (62), lineweight (370), for a layer of an xref 93 (0 for a newly attached one; a file can hold
//! 1, whose meaning isn't measured), LTYPE handle (331), plot style (in a drawing of colour-dependent
//! plot styles the name `Color_N` in group 1, N its colour index; of named ones the handle of its
//! placeholder object in group 390), transparency (440: 0 opaque, else `0x02000000 | alpha`) and,
//! for a true colour, 92 (`0xC2RRGGBB`).
//!
//! States AutoCAD's dictionary can't hold stay in CADCraft's own record (`CADCRAFT_LAYERSTATES`):
//! the view layer snapshots (`*VIEW name`), and a name that repeats an earlier one in another
//! case: AutoCAD 2024 opens the entries `S` and `s` of one dictionary as one state, named as the
//! first entry and holding the last one's record (measured), and so does the reader here.
use std::collections::{HashMap, HashSet};
use cadcraft_color::{Color, Rgb};
use cadcraft_doc::{Layer, LayerState, Lineweight};
use craft_dxf::Tag;
use crate::dxf_ext::{transparency_from_dxf, transparency_to_dxf};
/// The key of the states dictionary in the LAYER table's extension dictionary.
pub(crate) const KEY: &str = "ACAD_LAYERSTATES";
/// The prefix of a true colour in group 92.
const TRUE_COLOR: u32 = 0xC200_0000;
/// The bytes of layers the states of one file may copy (CWE-400). Each entry of a state is a copy
/// of the drawing's layer, its names and description included, so without a bound a small file
/// naming one layer with a long description in a great many entries would take gigabytes.
pub(crate) const MAX_COPIED_BYTES: usize = 256 << 20;
/// Which of `states` go into AutoCAD's dictionary (the others into CADCraft's record).
pub(crate) fn in_acad(states: &[LayerState]) -> Vec<bool> {
let mut seen: HashSet<String> = HashSet::with_capacity(states.len());
states.iter().map(|st| !st.name.trim().is_empty() && !st.name.starts_with('*') && seen.insert(st.name.to_lowercase())).collect()
}
/// The states CADCraft's own record keeps (those [`in_acad`] leaves out).
pub(crate) fn own(states: &[LayerState]) -> Vec<LayerState> {
states.iter().zip(in_acad(states)).filter(|(_, acad)| !acad).map(|(st, _)| st.clone()).collect()
}
/// Handles of the objects that hold the drawing's states in AutoCAD's form.
#[derive(Default)]
pub(crate) struct Plan {
/// The LAYER table, which owns the extension dictionary.
pub table: String,
/// The LAYER table's extension dictionary.
pub xdict: String,
/// The `ACAD_LAYERSTATES` dictionary.
dict: String,
/// (index in the drawing's states, XRECORD handle).
records: Vec<(usize, String)>,
}
impl Plan {
pub fn new(states: &[LayerState], mut handle: impl FnMut() -> String) -> Self {
let acad = in_acad(states);
if !acad.contains(&true) {
return Plan::default();
}
let xdict = handle();
let dict = handle();
let records = acad.iter().enumerate().filter(|(_, a)| **a).map(|(i, _)| (i, handle())).collect();
Plan { table: String::new(), xdict, dict, records }
}
pub fn is_empty(&self) -> bool {
self.records.is_empty()
}
}
/// What the state objects need from the rest of the file.
pub(crate) struct Refs<'a> {
/// Upper-case layer name → LAYER record handle.
pub layers: &'a HashMap<String, String>,
/// Upper-case linetype name → LTYPE record handle.
pub ltypes: &'a HashMap<String, String>,
/// Upper-case plot style name → its placeholder object's handle.
pub pstyles: &'a HashMap<String, String>,
/// Plot styles by colour (`$PSTYLEMODE` 1): the plot style name is `Color_N`.
pub colour_dependent: bool,
}
/// The objects of plan `p`: the extension dictionary, the `ACAD_LAYERSTATES` dictionary and one
/// XRECORD per state. Layers the drawing no longer has are left out of a state (AutoCAD names
/// layers by handle).
pub(crate) fn objects(p: &Plan, states: &[LayerState], refs: &Refs) -> Vec<Tag> {
let mut t = Vec::new();
if p.is_empty() {
return t;
}
t.extend([Tag::s(0, "DICTIONARY"), Tag::s(5, &p.xdict), Tag::s(330, &p.table), Tag::s(100, "AcDbDictionary"), Tag::i(280, 1), Tag::i(281, 1)]);
t.extend([Tag::s(3, KEY), Tag::s(360, &p.dict)]);
t.extend([Tag::s(0, "DICTIONARY"), Tag::s(5, &p.dict), Tag::s(102, "{ACAD_REACTORS"), Tag::s(330, &p.xdict), Tag::s(102, "}")]);
t.extend([Tag::s(330, &p.xdict), Tag::s(100, "AcDbDictionary"), Tag::i(281, 1)]);
let planned = || p.records.iter().filter_map(|(i, h)| Some((states.get(*i)?, h)));
for (st, h) in planned() {
t.extend([Tag::s(3, &st.name), Tag::s(350, h)]);
}
for (st, h) in planned() {
t.extend([Tag::s(0, "XRECORD"), Tag::s(5, h), Tag::s(102, "{ACAD_REACTORS"), Tag::s(330, &p.dict), Tag::s(102, "}"), Tag::s(330, &p.dict)]);
t.extend([Tag::s(100, "AcDbXrecord"), Tag::i(280, 1), Tag::i(91, i64::from(st.mask)), Tag::s(301, &st.description), Tag::i(290, 0)]);
t.push(Tag::s(302, &st.current));
for l in &st.layers {
if let Some(lh) = refs.layers.get(&l.name.to_ascii_uppercase()) {
layer(&mut t, l, lh, refs);
}
}
}
t
}
/// One layer of a state's XRECORD.
fn layer(t: &mut Vec<Tag>, l: &Layer, handle: &str, refs: &Refs) {
let flags = i64::from(!l.on) | i64::from(l.frozen) << 1 | i64::from(l.locked) << 2 | i64::from(l.plot) << 3 | i64::from(l.vp_freeze_new) << 4;
let aci = match l.color {
Color::True(rgb) => i64::from(cadcraft_color::nearest_aci(rgb)),
c => i64::from(c.to_aci()).clamp(1, 255),
};
t.extend([Tag::s(330, handle), Tag::i(90, flags), Tag::i(62, aci), Tag::i(370, i64::from(l.lineweight.to_dxf()))]);
if crate::dxf_xref::dependent(&l.name) {
t.push(Tag::i(93, 0));
}
// A linetype the drawing no longer has: Continuous, which every drawing has.
if let Some(lt) = refs.ltypes.get(&l.linetype.to_ascii_uppercase()).or_else(|| refs.ltypes.get("CONTINUOUS")) {
t.push(Tag::s(331, lt));
}
if refs.colour_dependent {
t.push(Tag::s(1, format!("Color_{aci}")));
} else if let Some(ps) = refs.pstyles.get(&l.plot_style.trim().to_ascii_uppercase()).or_else(|| refs.pstyles.get("NORMAL")) {
t.push(Tag::s(390, ps));
}
t.push(Tag::i(440, if l.transparency == 0 { 0 } else { transparency_to_dxf(l.transparency) }));
if let Color::True(rgb) = l.color {
t.push(Tag::i(92, i64::from(i32::from_be_bytes((TRUE_COLOR | rgb.to_u32()).to_be_bytes()))));
}
}
/// What a state's handles name in the drawing being read.
pub(crate) struct Lookup<'a> {
/// The drawing's layer a LAYER handle names: a state's layer starts as a copy of it (what the
/// state doesn't hold, such as the description, is the drawing's).
pub layer: &'a dyn Fn(&str) -> Option<Layer>,
/// The linetype an LTYPE handle names.
pub ltype: &'a dyn Fn(&str) -> Option<String>,
/// The plot style a placeholder handle names.
pub pstyle: &'a dyn Fn(&str) -> Option<String>,
/// Plot styles by colour: group 1 (`Color_N`) says nothing the layer's colour doesn't.
pub colour_dependent: bool,
}
/// The state `name` from its XRECORD's groups. A layer whose record is gone (AutoCAD keeps a
/// purged layer's entry, measured) is skipped. A layer named in two entries is in the state once,
/// the later entry's groups over the earlier one's, as restoring both in turn did: AutoCAD 2024
/// restores the later one (measured with entries that each set every property). Each copy of a
/// layer is charged to `budget`, the file's [`MAX_COPIED_BYTES`]; once it is spent, the entries
/// left are left out.
pub(crate) fn read(name: &str, tags: &[Tag], lookup: &Lookup, budget: &mut usize) -> LayerState {
let mut st = LayerState { name: name.to_string(), ..LayerState::default() };
// The data follows the subclass marker (an XRECORD without one holds none).
let start = tags.iter().position(|t| t.code == 100 && t.str().trim() == "AcDbXrecord").map_or(tags.len(), |i| i + 1);
let body = tags.get(start..).unwrap_or_default();
let first = body.iter().position(|t| t.code == 330).unwrap_or(body.len());
for t in body.get(..first).unwrap_or_default() {
match t.code {
91 => st.mask = t.str().trim().parse::<u32>().unwrap_or(LayerState::ALL),
301 => st.description = t.str(),
302 => st.current = t.str(),
_ => {}
}
}
let rest = body.get(first..).unwrap_or_default();
// The index in the state of each layer by its LAYER handle.
let mut index: HashMap<String, usize> = HashMap::new();
let mut at = 0;
while let Some(group) = rest.get(at..) {
let Some(head) = group.first() else { break };
let len = group.iter().skip(1).position(|t| t.code == 330).map_or(group.len(), |n| n + 1);
at += len;
let groups = group.get(1..len).unwrap_or_default();
let key = head.str().trim().to_ascii_uppercase();
if let Some(slot) = index.get(&key).and_then(|&i| st.layers.get_mut(i)) {
entry(slot, groups, lookup);
} else if let Some(mut l) = (lookup.layer)(&head.str()) {
let Some(left) = budget.checked_sub(cost(&l)) else { break };
*budget = left;
entry(&mut l, groups, lookup);
index.insert(key, st.layers.len());
st.layers.push(l);
}
}
st
}
/// The bytes a copy of layer `l` takes.
fn cost(l: &Layer) -> usize {
std::mem::size_of::<Layer>() + l.name.len() + l.linetype.len() + l.description.len() + l.plot_style.len()
}
/// A layer's properties from the groups after its handle.
fn entry(l: &mut Layer, groups: &[Tag], lookup: &Lookup) {
let int = |t: &Tag| t.str().trim().parse::<i64>().ok();
let mut true_color = None;
for t in groups {
match t.code {
90 => {
if let Some(f) = int(t) {
(l.on, l.frozen, l.locked, l.plot, l.vp_freeze_new) = (f & 1 == 0, f & 2 != 0, f & 4 != 0, f & 8 != 0, f & 16 != 0);
}
}
62 => {
if let Some(c) = int(t).map(i64::abs).and_then(|c| u8::try_from(c).ok()).filter(|c| *c >= 1) {
l.color = Color::Index(c);
}
}
92 => true_color = int(t).and_then(|v| u32::try_from(v & 0xFFFF_FFFF).ok()).filter(|v| v & 0xFF00_0000 == TRUE_COLOR),
370 => {
if let Some(w) = int(t).and_then(|w| i16::try_from(w).ok()) {
l.lineweight = Lineweight::from_dxf(w);
}
}
331 => {
if let Some(lt) = (lookup.ltype)(&t.str()) {
l.linetype = lt;
}
}
390 => {
if let Some(ps) = (lookup.pstyle)(&t.str()) {
l.plot_style = ps;
}
}
1 if !lookup.colour_dependent => l.plot_style = t.str(),
440 => {
if let Some(v) = int(t) {
l.transparency = transparency_from_dxf(v).unwrap_or(0);
}
}
_ => {}
}
}
if let Some(v) = true_color {
l.color = Color::True(Rgb::from_u32(v & 0x00FF_FFFF));
}
}
#[cfg(test)]
mod tests {
use super::*;
/// A state's XRECORD groups with an entry per (layer handle, colour index).
fn tags(entries: &[(&str, i64)]) -> Vec<Tag> {
let mut t = vec![Tag::s(100, "AcDbXrecord"), Tag::i(280, 1), Tag::i(91, 2047), Tag::s(302, "0")];
for (h, aci) in entries {
t.extend([Tag::s(330, *h), Tag::i(90, 8)]);
// 0: no colour group.
if *aci != 0 {
t.push(Tag::i(62, *aci));
}
}
t
}
#[test]
fn a_layer_named_twice_takes_its_last_entry_and_copies_stop_at_the_budget() {
let layer = |h: &str| match h {
"A1" => Some(Layer::new("A")),
"B1" => Some(Layer::new("B")),
_ => None,
};
let none = |_: &str| None::<String>;
let lookup = Lookup { layer: &layer, ltype: &none, pstyle: &none, colour_dependent: true };
let colours = |st: &LayerState| st.layers.iter().map(|l| (l.name.clone(), l.color)).collect::<Vec<_>>();
// AutoCAD 2024 restores the last of two entries of one layer (measured: green, then blue,
// restores blue); it stays in the first one's place. A later entry without a colour keeps
// the earlier one's, as restoring both in turn did.
let mut budget = MAX_COPIED_BYTES;
let st = read("S", &tags(&[("A1", 3), ("B1", 2), ("A1", 5), ("B1", 0)]), &lookup, &mut budget);
assert_eq!(colours(&st), [("A".to_string(), Color::Index(5)), ("B".to_string(), Color::Index(2))]);
// Each new copy is charged (a repeated entry copies nothing); past the budget the rest of
// the entries, and of the file's states, are left out.
let one = cost(&Layer::new("A"));
let mut budget = one;
let st = read("S", &tags(&[("A1", 3), ("A1", 4), ("B1", 5)]), &lookup, &mut budget);
assert_eq!((colours(&st), budget), (vec![("A".to_string(), Color::Index(4))], 0));
let st = read("T", &tags(&[("B1", 2)]), &lookup, &mut budget);
assert!(st.layers.is_empty());
}
}
+77 -21
View File
@@ -36,10 +36,11 @@ const MODELLED_KEYS: &[&str] = &[
"ACAD_IMAGE_VARS",
];
/// Extension dictionary entries not kept raw: dimension associativity (CADCraft reads and
/// rewrites it), draw order and annotation scale contexts (written from their own models by the
/// changes that model them; stale copies would contradict the drawing).
const MODELLED_XDICT_KEYS: &[&str] = &["ACAD_DIMASSOC", "ACAD_SORTENTS", "ACDBCONTEXTDATAMANAGER"];
/// Extension dictionary entries not kept raw: dimension associativity and the LAYER table's layer
/// states (CADCraft reads and rewrites them), draw order and annotation scale contexts (written
/// from their own models by the changes that model them; stale copies would contradict the
/// drawing).
const MODELLED_XDICT_KEYS: &[&str] = &["ACAD_DIMASSOC", "ACAD_LAYERSTATES", "ACAD_SORTENTS", "ACDBCONTEXTDATAMANAGER"];
/// Applications whose xdata CADCraft reads and writes itself. `ACAD` holds dimension overrides
/// (DSTYLE) on dimensions and dimension styles; elsewhere it is kept.
@@ -989,20 +990,7 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
let root = objects.first().filter(|(k, _, _)| is_dictionary(k)).map(|(_, s, _)| *s);
let root_keys: HashSet<String> =
objects.iter().find(|(_, s, _)| Some(*s) == root).map(|(_, _, t)| entries(t).into_iter().map(|(k, _)| up(&k)).collect()).unwrap_or_default();
// Extension dictionaries that go on a written record (one without its own).
let mut block = String::new();
let mut attached: HashSet<String> = HashSet::new();
for r in &recs {
if r.kind == "BLOCK" {
block = up(&val(body(r), 2).unwrap_or_default());
}
if let Some(x) = extra_for(f, &xd, r, body(r), &block)
&& let Some(xd) = x.xdict
&& head(body(r)).xdict.is_none()
{
attached.insert(xd.hex());
}
}
let (mut attached, merged) = kept_dictionaries(f, &xd, &recs, tags);
for (_, t) in planned.values().flatten() {
let x = head(t.get(1..).unwrap_or(&[])).handle.and_then(|h| handle(&h)).and_then(|h| entity_extra(f, &xd, h));
attached.extend(x.and_then(|x| x.xdict).map(Handle::hex));
@@ -1050,7 +1038,7 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
if nod.contains(&owner) {
break dict_entries.get(&cur).is_some_and(|k| !root_keys.contains(&up(k))) && root.is_some();
}
if attached.contains(&cur) {
if attached.contains(&cur) || merged.contains_key(&cur) {
break true;
}
break unknown.contains(&owner) && written.contains(&owner);
@@ -1068,6 +1056,13 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
alive.insert(o.handle.hex(), format!("{next:X}"));
next = next.saturating_add(1);
}
// A merged dictionary is not written: what pointed at it points at the written one.
for (kept, own) in &merged {
if let Some(h) = alive.get_mut(kept) {
h.clone_from(own);
}
}
let merged_into: HashMap<String, &ForeignObject> = merged.iter().filter_map(|(kept, own)| Some((own.clone(), *objs.get(kept)?))).collect();
let entities: HashSet<String> = all_entities(d).map(|e| e.handle.hex()).filter(|h| written.contains(h)).collect();
let map = Map { f, alive, raw: objs.keys().cloned().collect(), roles, entities };
let mut out: Vec<Tag> = Vec::with_capacity(tags.len() + f.objects.iter().map(|o| o.tags.len() + 1).sum::<usize>());
@@ -1081,7 +1076,7 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
continue;
}
if r.kind == "ENDSEC" && r.sec == "OBJECTS" {
for o in f.objects.iter().filter(|o| map.alive.contains_key(&o.handle.hex())) {
for o in f.objects.iter().filter(|o| map.alive.contains_key(&o.handle.hex()) && !merged.contains_key(&o.handle.hex())) {
let number = is_proxy(&o.kind).then(|| renumber(class_number(o.tags.iter().map(|r| (r.code, r.value.as_str()))))).flatten();
match number {
Some(n) => {
@@ -1105,11 +1100,15 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
}
out.extend(tags.get(r.start).cloned());
let x = extra_for(f, &xd, r, b, &block);
if x.is_none() && Some(r.start) != root {
let joined = joined_into(&merged_into, b);
if x.is_none() && Some(r.start) != root && joined.is_none() {
out.extend(b.iter().cloned());
continue;
}
record(&map, r, b, x.as_deref(), None, Some(r.start) == root, &mut out);
if let Some(kept) = joined {
join_entries(&map, b, kept, &mut out);
}
}
add_appids(&mut out);
let top = max_handle(&out).saturating_add(1);
@@ -1121,6 +1120,32 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
*tags = out;
}
/// Kept extension dictionaries of written records: those that go on a record without its own,
/// and those whose entries join the one the writer gave a table (the LAYER table's, holding the
/// layer states) as kept dictionary → the written one.
fn kept_dictionaries(f: &Foreign, xd: &XdataOf, recs: &[Rec], tags: &[Tag]) -> (HashSet<String>, HashMap<String, String>) {
let body = |r: &Rec| tags.get(r.start + 1..r.end).unwrap_or(&[]);
let mut block = String::new();
let mut attached: HashSet<String> = HashSet::new();
let mut merged: HashMap<String, String> = HashMap::new();
for r in recs {
if r.kind == "BLOCK" {
block = up(&val(body(r), 2).unwrap_or_default());
}
let Some(kept) = extra_for(f, xd, r, body(r), &block).and_then(|x| x.xdict) else { continue };
match head(body(r)).xdict {
None => {
attached.insert(kept.hex());
}
Some(own) if r.sec == "TABLES" => {
merged.insert(kept.hex(), own);
}
Some(_) => {}
}
}
(attached, merged)
}
/// Complete source tables keep positional identities even when names repeat.
fn proxy_class_number(f: &Foreign, numbers: &HashMap<String, i64>, old: Option<i64>) -> Option<i64> {
if f.complete_class_table {
@@ -1352,6 +1377,37 @@ fn record(map: &Map, r: &Rec, b: &[Tag], x: Option<&ForeignExtra>, unknown: Opti
}
}
/// The kept dictionary whose entries join written dictionary `b`, if any.
fn joined_into<'a>(merged_into: &HashMap<String, &'a ForeignObject>, b: &[Tag]) -> Option<&'a ForeignObject> {
if merged_into.is_empty() {
return None;
}
head(b).handle.and_then(|h| merged_into.get(&h).copied())
}
/// The entries of kept dictionary `kept` that written dictionary `b` doesn't have (by key, without
/// regard to case), appended to it with their handles remapped; entries whose object is gone are
/// left out.
fn join_entries(map: &Map, b: &[Tag], kept: &ForeignObject, out: &mut Vec<Tag>) {
let has = |key: &str| b.iter().any(|t| t.code == 3 && up(&t.str()) == up(key));
let mut key: Option<&str> = None;
for t in kept.tags.iter().take_while(|t| t.code < 1000) {
match t.code {
3 => key = Some(t.value.as_str()),
350 | 360 => {
if let Some(k) = key.take()
&& !has(k)
&& let Some(h) = map.get(&t.value).filter(|h| h != "0")
{
out.push(Tag::s(3, k));
out.push(Tag::s(t.code, h));
}
}
_ => {}
}
}
}
/// Kept xdata of applications the record doesn't already carry, handles remapped.
fn xdata(map: &Map, x: &ForeignExtra, own: &HashSet<String>, out: &mut Vec<Tag>) {
let mut skip = false;
+96 -5
View File
@@ -8,10 +8,14 @@ use super::{Drawing, EntityKind, Group, Handle, HashMap, MLeaderStyle, PageSetup
pub(super) struct Objects {
/// Dictionary entry handle (upper case) → entry name.
names: HashMap<String, String>,
/// (dictionary handle, entry handle), both upper case, in the order the dictionaries list them.
entry_order: Vec<(String, String)>,
/// SCALE objects (the annotation scale list), in file order.
scales: Vec<cadcraft_doc::AnnoScale>,
/// XRECORD handle (upper case) → its groups.
xrecords: HashMap<String, Vec<Tag>>,
/// XRECORD handles in file order.
xrecord_order: Vec<String>,
/// TABLESTYLE objects: (handle, groups).
table_styles: Vec<(String, Vec<Tag>)>,
/// DIMASSOC objects.
@@ -50,7 +54,11 @@ impl Objects {
if let Some(n) = name.take()
&& self.names.len() < MAX_OBJECTS
{
self.names.insert(t.str().trim().to_ascii_uppercase(), n);
let entry = t.str().trim().to_ascii_uppercase();
if self.entry_order.len() < MAX_OBJECTS {
self.entry_order.push((h.clone(), entry.clone()));
}
self.names.insert(entry, n);
}
}
_ => {}
@@ -58,7 +66,9 @@ impl Objects {
}
}
"XRECORD" if self.xrecords.len() < MAX_OBJECTS => {
self.xrecords.insert(h, tags.to_vec());
if self.xrecords.insert(h.clone(), tags.to_vec()).is_none() {
self.xrecord_order.push(h);
}
}
"TABLESTYLE" if self.table_styles.len() < MAX_OBJECTS => self.table_styles.push((h, tags.to_vec())),
"DIMASSOC" if self.dimassocs.len() < MAX_OBJECTS => self.dimassocs.push(tags.to_vec()),
@@ -80,6 +90,65 @@ impl Objects {
}
}
/// The layer states of the LAYER table's `ACAD_LAYERSTATES` dictionary (its XRECORDs, in file
/// order), read with the drawing's layers and linetypes. Entries whose names differ only in case
/// are one state, as AutoCAD 2024 opens them (measured with `S` and `s` in both orders): named as
/// the first of them in the dictionary, holding the last one's record, where the first of their
/// records comes in the file.
fn acad_layer_states(&self, d: &Drawing, rx: &Rx) -> Vec<cadcraft_doc::LayerState> {
let dicts: std::collections::HashSet<&str> =
self.names.iter().filter(|(_, n)| n.eq_ignore_ascii_case(crate::dxf_layer_states::KEY)).map(|(h, _)| h.as_str()).collect();
if dicts.is_empty() {
return Vec::new();
}
let mut by_name: HashMap<String, &cadcraft_doc::Layer> = HashMap::with_capacity(d.layers.len());
for l in &d.layers {
by_name.entry(l.name.to_ascii_lowercase()).or_insert(l);
}
let layer_of =
|h: &str| rx.layers.get(&h.trim().to_ascii_uppercase()).and_then(|n| by_name.get(&n.to_ascii_lowercase())).map(|l| (*l).clone());
let ltype_of = |h: &str| rx.ltypes.get(&h.trim().to_ascii_uppercase()).cloned();
let pstyle_of = |h: &str| rx.pstyles.get(&h.trim().to_ascii_uppercase()).cloned();
let lookup = crate::dxf_layer_states::Lookup {
layer: &layer_of,
ltype: &ltype_of,
pstyle: &pstyle_of,
colour_dependent: d.header.i64("PSTYLEMODE", 1) != 0,
};
let ours = |tags: &[Tag]| owner(tags).is_some_and(|o| dicts.contains(o.as_str()));
// By lower-case name: the first entry's name and the last entry's record, in dictionary order.
let mut first: HashMap<String, &String> = HashMap::new();
let mut last: HashMap<String, &Vec<Tag>> = HashMap::new();
for (dict, h) in &self.entry_order {
if dicts.contains(dict.as_str())
&& let (Some(name), Some(tags)) = (self.names.get(h), self.xrecords.get(h))
&& ours(tags)
{
first.entry(name.to_ascii_lowercase()).or_insert(name);
last.insert(name.to_ascii_lowercase(), tags);
}
}
let mut out = Vec::new();
let mut taken = std::collections::HashSet::new();
let mut budget = crate::dxf_layer_states::MAX_COPIED_BYTES;
for h in &self.xrecord_order {
let (Some(tags), Some(name)) = (self.xrecords.get(h), self.names.get(h)) else { continue };
if out.len() >= crate::dxf_ext::MAX_LAYER_STATES {
break;
}
if !ours(tags) {
continue;
}
let key = name.to_ascii_lowercase();
if taken.insert(key.clone()) {
let name = first.get(&key).copied().unwrap_or(name);
let tags = last.get(&key).copied().unwrap_or(tags);
out.push(crate::dxf_layer_states::read(name, tags, &lookup, &mut budget));
}
}
out
}
/// The text of the CADCraft XRECORD stored under `key` in a dictionary (its 1/3 strings).
pub(super) fn xrecord_text(&self, key: &str) -> Option<String> {
let h = self.names.iter().find(|(_, n)| n.as_str() == key).map(|(h, _)| h)?;
@@ -208,10 +277,18 @@ impl Objects {
if let Some(p) = self.xrecord_text(crate::dxf_ext::ANNOTATION_KEY).and_then(|t| crate::dxf_ext::parse_anno(&t)) {
crate::dxf_ext::apply_anno(d, p);
}
// Saved layer states.
if let Some(states) = self.xrecord_text(crate::dxf_ext::LAYER_STATES_KEY).and_then(|t| crate::dxf_ext::parse_layer_states(&t)) {
d.layer_states = states;
// Saved layer states: AutoCAD's, then those of CADCraft's own record (a file of an
// earlier version keeps them all there) that AutoCAD's doesn't hold.
let mut states = self.acad_layer_states(d, rx);
if let Some(own) = self.xrecord_text(crate::dxf_ext::LAYER_STATES_KEY).and_then(|t| crate::dxf_ext::parse_layer_states(&t)) {
let mut names: std::collections::HashSet<String> = states.iter().map(|s| s.name.clone()).collect();
for st in own {
if states.len() < crate::dxf_ext::MAX_LAYER_STATES && names.insert(st.name.clone()) {
states.push(st);
}
}
}
d.layer_states = states;
// The drawing's plot style tables.
if let Some(tables) = self.xrecord_text(crate::dxf_ext::PLOT_STYLES_KEY).and_then(|t| crate::dxf_ext::parse_plot_styles(&t)) {
d.plot_style_tables = tables;
@@ -231,6 +308,20 @@ impl Objects {
}
}
/// An object's owner (its first group 330 outside a `102` group), upper case.
fn owner(tags: &[Tag]) -> Option<String> {
let mut inside = false;
for t in tags {
match t.code {
102 => inside = t.str().trim().starts_with('{'),
330 if !inside => return Some(t.str().trim().to_ascii_uppercase()),
100 => return None,
_ => {}
}
}
None
}
/// Page setup from a LAYOUT object's AcDbPlotSettings fields (sizes and margins in mm).
pub(super) fn page_setup(t: &T) -> PageSetup {
let mut p = PageSetup::default();
+2
View File
@@ -58,6 +58,8 @@ pub(super) struct Ctx {
pub(super) frozen_341: bool,
/// MTEXT columns as the legacy groups 75..79 even from R2018 (the groups AutoLISP lists).
pub(super) legacy_columns: bool,
/// Saved layer states in AutoCAD's form (the LAYER table's extension dictionary).
pub(super) layer_states: crate::dxf_layer_states::Plan,
}
impl Ctx {
+8
View File
@@ -143,10 +143,18 @@ pub(super) fn vport_table(w: &mut W, d: &Drawing, ext: Bounds2) {
}
pub(super) fn table_head(w: &mut W, name: &str, count: usize) -> String {
table_head_x(w, name, count, None)
}
/// A table's head, with its extension dictionary `xdict` when it has one.
pub(super) fn table_head_x(w: &mut W, name: &str, count: usize, xdict: Option<&str>) -> String {
let h = w.h();
w.s(0, "TABLE");
w.s(2, name);
w.s(5, h.clone());
if let Some(x) = xdict {
w.group("ACAD_XDICTIONARY", 360, &[x]);
}
w.s(330, "0");
w.s(100, "AcDbSymbolTable");
w.i(70, count as i64);
+29 -8
View File
@@ -4,7 +4,7 @@ use super::common::annotative_xdata;
use super::ctx::{AssocObj, Ctx};
use super::entity::{entity, hatch_reactors};
use super::header::{code_page, header_vars};
use super::layout::{paper_views, record_head, sheet_first, table_head, vport_table};
use super::layout::{paper_views, record_head, sheet_first, table_head, table_head_x, vport_table};
use super::objects::{cadcraft_fonts_name, group_obj, mleader_style_obj, scale_list, table_style_obj};
use super::{
Block, Color, DimStyle, DimVal, Drawing, Entity, EntityKind, EntityStore, Group, HVal, Handle, HashMap, Layout, MLeaderStyle, PageSetup, Space,
@@ -68,7 +68,7 @@ fn write_tables(w: &mut W, plan: TableWritePlan<'_>) -> HashMap<String, String>
}
}
w.s(0, "ENDTAB");
write_layer_table(w, d);
write_layer_table(w, d, &mut cx.layer_states);
// STYLE. Linetype shapes from a shape file that isn't a text style get an unnamed shape
// style record (70 bit 1) naming the file.
let mut shape_files: Vec<String> = Vec::new();
@@ -185,8 +185,12 @@ fn write_tables(w: &mut W, plan: TableWritePlan<'_>) -> HashMap<String, String>
ltype_handles
}
fn write_layer_table(w: &mut W, d: &Drawing) {
let th = table_head(w, "LAYER", d.layers.len());
/// The LAYER table; when the drawing has layer states AutoCAD can hold, the table's extension
/// dictionary holds them (written with the objects, [`crate::dxf_layer_states`]).
fn write_layer_table(w: &mut W, d: &Drawing, states: &mut crate::dxf_layer_states::Plan) {
let xdict = (!states.is_empty()).then(|| states.xdict.clone());
let th = table_head_x(w, "LAYER", d.layers.len(), xdict.as_deref());
states.table.clone_from(&th);
for l in &d.layers {
let lh = record_head(w, "LAYER", &th, "AcDbLayerTableRecord");
w.layers.insert(l.name.to_ascii_uppercase(), lh);
@@ -749,6 +753,16 @@ fn write_objects(w: &mut W, plan: ObjectWritePlan<'_>) {
write_root_group_objects(w, &plan, &groups, &group_owner, &written, &mleader_dict);
write_style_objects(w, &plan, &mleader_dict, &mleader_handles);
write_named_objects(w, &plan);
let layer_states = {
let refs = crate::dxf_layer_states::Refs {
layers: &w.layers,
ltypes: &plan.cx.ltypes,
pstyles: &w.pstyles,
colour_dependent: plan.d.header.i64("PSTYLEMODE", 1) != 0,
};
crate::dxf_layer_states::objects(&plan.cx.layer_states, &plan.d.layer_states, &refs)
};
w.t.extend(layer_states);
write_associative_objects(w, plan.cx);
write_layout_objects(w, &plan);
// Raster image definitions.
@@ -979,7 +993,9 @@ pub(super) fn tags_for(d: &Drawing, version: Version, target: Version, frozen_34
if let Some(chunks) = dxf_ext::constraint_chunks(&d.constraints, &d.parametric) {
xrecords.push((dxf_ext::CONSTRAINTS_KEY, w.h(), chunks));
}
if let Some(chunks) = dxf_ext::layer_state_chunks(&d.layer_states) {
// Saved layer states: AutoCAD's dictionary holds those it can, CADCraft's record the others.
cx.layer_states = crate::dxf_layer_states::Plan::new(&d.layer_states, || w.h());
if let Some(chunks) = dxf_ext::layer_state_chunks(&crate::dxf_layer_states::own(&d.layer_states)) {
xrecords.push((dxf_ext::LAYER_STATES_KEY, w.h(), chunks));
}
if let Some(chunks) = dxf_ext::plot_style_chunks(&d.plot_style_tables) {
@@ -991,14 +1007,19 @@ pub(super) fn tags_for(d: &Drawing, version: Version, target: Version, frozen_34
// The annotation scale list: the ACAD_SCALELIST dictionary of SCALE objects.
let scale_dict = w.h();
let scales: Vec<(&cadcraft_doc::AnnoScale, String)> = d.scales.iter().filter(|s| s.is_valid()).map(|s| (s, w.h())).collect();
// Plot style names used by layers and objects (Normal always), each a placeholder object.
// Plot style names used by layers and objects (Normal always), each a placeholder object; in
// a drawing of named plot styles also those of the layers of saved layer states, which name
// theirs by placeholder.
let pstyle_dict = w.h();
let mut pstyle_names: Vec<String> = vec![cadcraft_doc::NORMAL_STYLE.to_string()];
let named = d.layers.iter().map(|l| l.plot_style.as_str()).chain(every.iter().map(|e| e.common.plot_style.as_str()));
let mut seen: std::collections::HashSet<String> = pstyle_names.iter().map(|n| n.to_ascii_uppercase()).collect();
let named_styles = d.header.i64("PSTYLEMODE", 1) == 0;
let in_states = d.layer_states.iter().filter(|_| named_styles).flat_map(|s| s.layers.iter());
let named = d.layers.iter().chain(in_states).map(|l| l.plot_style.as_str()).chain(every.iter().map(|e| e.common.plot_style.as_str()));
for n in named {
let n = n.trim();
let logical = n.is_empty() || n.eq_ignore_ascii_case("bylayer") || n.eq_ignore_ascii_case("byblock");
if !logical && pstyle_names.len() < dxf_ext::MAX_PLOT_STYLE_NAMES && !pstyle_names.iter().any(|x| x.eq_ignore_ascii_case(n)) {
if !logical && pstyle_names.len() < dxf_ext::MAX_PLOT_STYLE_NAMES && seen.insert(n.to_ascii_uppercase()) {
pstyle_names.push(n.to_string());
}
}
+1
View File
@@ -9,6 +9,7 @@ mod dxf_raw;
mod dxf_clip;
mod dxf_ext;
mod dxf_image;
mod dxf_layer_states;
mod dxf_mleader;
mod dxf_read;
mod dxf_table;
+17 -5
View File
@@ -1856,22 +1856,24 @@ fn layer_states_roundtrip_next_to_constraints() {
description: "walls \\ hidden".into(),
..Layer::default()
});
d.layer_states.push(LayerState { name: "Plot".into(), layers: d.layers.clone() });
d.layer_states.push(LayerState::new("Plot", d.layers.clone(), "Wände"));
let mut off = d.layers.clone();
for l in &mut off {
(l.on, l.frozen, l.locked, l.plot) = (false, true, true, false);
}
d.layer_states.push(LayerState { name: "All off".into(), layers: off });
d.layer_states.push(LayerState::new("All off", off, ""));
let text = write_dxf(&d);
assert!(text.contains("CADCRAFT_LAYERSTATES"));
// AutoCAD's dictionary holds both states; CADCraft's record isn't needed.
assert!(text.contains("ACAD_LAYERSTATES") && !text.contains("CADCRAFT_LAYERSTATES"));
let back = read_dxf(text.as_bytes()).unwrap();
assert_eq!(back.layer_states, d.layer_states);
assert_eq!(back.constraints, constraints);
assert_eq!(roundtrip(&back).layer_states, d.layer_states);
#[cfg(not(target_arch = "wasm32"))]
assert_eq!(read(&write(&d, "x.dwg").unwrap(), "x.dwg").unwrap().layer_states, d.layer_states);
// Drawings without saved layer states carry no record.
assert!(!write_dxf(&Drawing::new_imperial()).contains("CADCRAFT_LAYERSTATES"));
// Drawings without saved layer states carry neither.
let none = write_dxf(&Drawing::new_imperial());
assert!(!none.contains("CADCRAFT_LAYERSTATES") && !none.contains("ACAD_LAYERSTATES"));
}
fn table_sample() -> Table {
@@ -3713,3 +3715,13 @@ fn solid_hatch_keeps_angle_scale_and_double_flag() {
assert!(f("41").is_some_and(|s| (s - 2.0).abs() < 1e-12), "{h:?}");
assert_eq!(group(h, "77"), Some("0"), "{h:?}");
}
/// A layer state of CADCraft's own record from before states had a mask, a current layer and a
/// description (its JSON holds only the name and the layers) restores every property and names no
/// current layer.
#[test]
fn a_layer_state_saved_before_masks_restores_everything() {
let states = crate::dxf_ext::parse_layer_states(r#"{"version":1,"states":[{"name":"S","layers":[]}]}"#).unwrap();
let got: Vec<(&str, u32, &str, &str)> = states.iter().map(|s| (s.name.as_str(), s.mask, s.current.as_str(), s.description.as_str())).collect();
assert_eq!(got, [("S", LayerState::ALL, "", "")]);
}
+451
View File
@@ -0,0 +1,451 @@
//! Saved layer states in AutoCAD's form: the LAYER table's extension dictionary holds an
//! `ACAD_LAYERSTATES` dictionary of one XRECORD per state. The groups below are copied from
//! AutoCAD 2024's own DXFOUT of states saved with -LAYER stAte on a self-built drawing.
use cadcraft_color::{Color, Rgb};
use cadcraft_doc::{Drawing, Layer, LayerState, Lineweight};
use cadcraft_io::{read, write_dxf};
/// `(code, value)` pairs of a DXF, trimmed.
fn pairs(dxf: &str) -> Vec<(String, String)> {
let lines: Vec<&str> = dxf.lines().collect();
lines.chunks(2).filter_map(|c| Some((c.first()?.trim().to_string(), c.get(1)?.trim().to_string()))).collect()
}
fn join(p: &[(String, String)]) -> String {
p.iter().map(|(c, v)| format!("{c}\n{v}\n")).collect()
}
fn g(c: &str, v: &str) -> (String, String) {
(c.to_string(), v.to_string())
}
/// The records of a DXF: (type, groups after the `0`).
fn records(p: &[(String, String)]) -> Vec<(String, Vec<(String, String)>)> {
let mut out: Vec<(String, Vec<(String, String)>)> = Vec::new();
for (c, v) in p {
if c == "0" {
out.push((v.clone(), Vec::new()));
} else if let Some(last) = out.last_mut() {
last.1.push((c.clone(), v.clone()));
}
}
out
}
fn value<'a>(groups: &'a [(String, String)], code: &str) -> Option<&'a str> {
groups.iter().find(|(c, _)| c == code).map(|(_, v)| v.as_str())
}
/// The handle of table record `kind` named `name`.
fn record_handle(p: &[(String, String)], kind: &str, name: &str) -> String {
let recs = records(p);
let (_, groups) = recs.iter().find(|(k, gs)| k == kind && value(gs, "2").is_some_and(|n| n.eq_ignore_ascii_case(name))).unwrap();
value(groups, "5").unwrap().to_string()
}
/// A handle above every handle of the file, plus `k`.
fn fresh(p: &[(String, String)], k: u64) -> String {
let top = p.iter().filter(|(c, _)| c == "5" || c == "105").filter_map(|(_, v)| u64::from_str_radix(v, 16).ok()).max().unwrap();
format!("{:X}", top + 0x100 + k)
}
/// `dxf` with the LAYER table given extension dictionary `xdict` and `objects` added at the end
/// of OBJECTS.
fn inject(dxf: &str, xdict: &str, objects: Vec<(String, String)>) -> String {
let mut p = pairs(dxf);
let table = p.iter().enumerate().position(|(i, (c, v))| c == "0" && v == "TABLE" && p.get(i + 1).is_some_and(|n| n.1 == "LAYER")).unwrap();
let at = table + p[table..].iter().position(|(c, _)| c == "5").unwrap() + 1;
p.splice(at..at, [g("102", "{ACAD_XDICTIONARY"), g("360", xdict), g("102", "}")]);
let objs = p.iter().position(|(c, v)| c == "2" && v == "OBJECTS").unwrap();
let end = objs + p[objs..].iter().position(|(c, v)| c == "0" && v == "ENDSEC").unwrap();
p.splice(end..end, objects);
join(&p)
}
/// Layers A (red) and B, and the DASHED linetype.
fn drawing() -> Drawing {
let mut d = Drawing::new_metric();
d.layers.push(Layer { color: Color::Index(1), ..Layer::new("A") });
d.layers.push(Layer::new("B"));
d.linetypes.push(cadcraft_doc::library::standard_linetypes().into_iter().find(|l| l.name == "DASHED").unwrap());
d
}
/// State S2 as AutoCAD 2024 wrote it after -LAYER: A true colour 10,20,30 (nearest index 168),
/// 50% transparent, 0.35 mm, DASHED, not plotted; B locked and frozen in new viewports. Then the
/// entry of a layer purged since (AutoCAD keeps it, pointing at handles that are gone).
fn s2(p: &[(String, String)], rec: &str, dict: &str) -> Vec<(String, String)> {
let (a, b, zero) = (record_handle(p, "LAYER", "A"), record_handle(p, "LAYER", "B"), record_handle(p, "LAYER", "0"));
let (cont, dashed) = (record_handle(p, "LTYPE", "Continuous"), record_handle(p, "LTYPE", "DASHED"));
let gone = fresh(p, 0x50);
let mut v =
vec![g("0", "XRECORD"), g("5", rec), g("102", "{ACAD_REACTORS"), g("330", dict), g("102", "}"), g("330", dict), g("100", "AcDbXrecord")];
v.extend([g("280", "1"), g("91", "2047"), g("301", ""), g("290", "0"), g("302", "0")]);
for (h, flags, aci, lw, lt, ps, tr) in [
(b.as_str(), "28", "7", "-3", cont.as_str(), "Color_7", "0"),
(a.as_str(), "0", "168", "35", dashed.as_str(), "Color_168", "33554559"),
(zero.as_str(), "8", "7", "-3", cont.as_str(), "Color_7", "0"),
(gone.as_str(), "8", "7", "-3", gone.as_str(), "Color_7", "0"),
] {
v.extend([g("330", h), g("90", flags), g("62", aci), g("370", lw), g("331", lt), g("1", ps), g("440", tr)]);
if h == a {
v.push(g("92", "-1039526882"));
}
}
v
}
/// State S7, saved with only On and restored once (AutoCAD then sets bit 65536), current layer A.
fn s7(p: &[(String, String)], rec: &str, dict: &str) -> Vec<(String, String)> {
let (a, b) = (record_handle(p, "LAYER", "A"), record_handle(p, "LAYER", "B"));
let cont = record_handle(p, "LTYPE", "Continuous");
let mut v =
vec![g("0", "XRECORD"), g("5", rec), g("102", "{ACAD_REACTORS"), g("330", dict), g("102", "}"), g("330", dict), g("100", "AcDbXrecord")];
v.extend([g("280", "1"), g("91", "66049"), g("301", "only on"), g("290", "0"), g("302", "A")]);
for (h, aci) in [(b.as_str(), "7"), (a.as_str(), "1")] {
v.extend([g("330", h), g("90", "8"), g("62", aci), g("370", "-3"), g("331", &cont), g("1", &format!("Color_{aci}")), g("440", "0")]);
}
v
}
/// The extension dictionary of the LAYER table and the states dictionary, with `extra` entries in
/// the extension dictionary.
fn dictionaries(p: &[(String, String)], x: &str, y: &str, states: &[(&str, &str)], extra: &[(&str, &str)]) -> Vec<(String, String)> {
let table = {
let recs = records(p);
let (_, gs) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
value(gs, "5").unwrap().to_string()
};
let mut v = vec![g("0", "DICTIONARY"), g("5", x), g("330", &table), g("100", "AcDbDictionary"), g("280", "1"), g("281", "1")];
for (k, h) in extra.iter().copied().chain([("ACAD_LAYERSTATES", y)]) {
v.extend([g("3", k), g("360", h)]);
}
v.extend([
g("0", "DICTIONARY"),
g("5", y),
g("102", "{ACAD_REACTORS"),
g("330", x),
g("102", "}"),
g("330", x),
g("100", "AcDbDictionary"),
g("281", "1"),
]);
for (name, h) in states {
v.extend([g("3", name), g("350", h)]);
}
v
}
fn autocad_file() -> String {
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, r7) = (h(1), h(2), h(3), h(4));
let mut objects = dictionaries(&p, &x, &y, &[("S2", &r2), ("S7", &r7)], &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &r7, &y));
inject(&base, &x, objects)
}
#[test]
fn reads_the_layer_states_autocad_writes() {
let d = read(autocad_file().as_bytes(), "acad.dxf").unwrap();
let names: Vec<&str> = d.layer_states.iter().map(|s| s.name.as_str()).collect();
assert_eq!(names, ["S2", "S7"]);
let s2 = &d.layer_states[0];
assert_eq!((s2.mask, s2.current.as_str(), s2.description.as_str()), (2047, "0", ""));
// The purged layer's entry is skipped.
let layers: Vec<&str> = s2.layers.iter().map(|l| l.name.as_str()).collect();
assert_eq!(layers, ["B", "A", "0"]);
let a = &s2.layers[1];
assert_eq!(a.color, Color::True(Rgb(10, 20, 30)));
assert_eq!((a.transparency, a.lineweight, a.linetype.as_str()), (50, Lineweight::from_dxf(35), "DASHED"));
assert!(a.on && !a.frozen && !a.locked && !a.plot && !a.vp_freeze_new);
// A colour-dependent drawing: the plot style stays the layer's ("Color_168" is its colour's).
assert_eq!(a.plot_style, "Normal");
let b = &s2.layers[0];
assert!(b.on && !b.frozen && b.locked && b.plot && b.vp_freeze_new, "{b:?}");
assert_eq!((b.color, b.linetype.as_str(), b.transparency), (Color::Index(7), "Continuous", 0));
let s7 = &d.layer_states[1];
assert_eq!((s7.mask, s7.current.as_str(), s7.description.as_str()), (66049, "A", "only on"));
assert_eq!(s7.layers.iter().find(|l| l.name == "A").unwrap().color, Color::Index(1));
}
#[test]
fn autocads_layer_states_are_written_back_in_its_form() {
let d = read(autocad_file().as_bytes(), "acad.dxf").unwrap();
let text = write_dxf(&d);
let p = pairs(&text);
// One states dictionary, in the LAYER table's extension dictionary, and no CADCraft copy.
assert_eq!(p.iter().filter(|(c, v)| c == "3" && v == "ACAD_LAYERSTATES").count(), 1);
assert!(!text.contains("CADCRAFT_LAYERSTATES"));
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let x = table.windows(2).find(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).unwrap();
let (_, xd) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(x.as_str())).unwrap();
assert_eq!(value(xd, "330"), value(table, "5"));
let back = read(text.as_bytes(), "back.dxf").unwrap();
assert_eq!(back.layer_states, d.layer_states);
// The XRECORD of S2 as AutoCAD writes it: B, then A.
let (a_h, b_h) = (record_handle(&p, "LAYER", "A"), record_handle(&p, "LAYER", "B"));
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
let head = rec.iter().position(|(c, _)| c == "280").unwrap();
assert_eq!(rec[head..head + 5], [("280", "1"), ("91", "2047"), ("301", ""), ("290", "0"), ("302", "0")].map(|(c, v)| g(c, v)));
let cont = record_handle(&p, "LTYPE", "Continuous");
let b = [("330", b_h.as_str()), ("90", "28"), ("62", "7"), ("370", "-3"), ("331", &cont), ("1", "Color_7"), ("440", "0")];
assert_eq!(rec[head + 5..head + 12], b.map(|(c, v)| g(c, v)));
let from = rec.iter().position(|(c, v)| c == "330" && *v == a_h).unwrap();
let a: Vec<(String, String)> = rec[from..from + 9].to_vec();
let dashed = record_handle(&p, "LTYPE", "DASHED");
let want = [
("330", a_h.as_str()),
("90", "0"),
("62", "168"),
("370", "35"),
("331", &dashed),
("1", "Color_168"),
("440", "33554559"),
("92", "-1039526882"),
];
assert_eq!(a[..8], want.map(|(c, v)| g(c, v)), "{a:?}");
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "x.dwg").unwrap();
assert_eq!(read(&dwg, "x.dwg").unwrap().layer_states, d.layer_states);
}
}
#[test]
fn layer_filters_next_to_the_states_are_kept() {
// The LAYER table's extension dictionary of a drawing with layer filters holds them next to
// the states (ACAD_LAYERFILTERS, ACLYDICTIONARY): they stay, in the dictionary CADCraft writes.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, f, fr, gone) = (h(1), h(2), h(3), h(4), h(5), h(6));
// Two entries whose objects the file doesn't have (a handle of nothing, and a null one): they
// aren't written into the table's dictionary.
let extra = [("ACAD_LAYERFILTERS", f.as_str()), ("OTHER_GONE", gone.as_str()), ("OTHER_NULL", "0")];
let mut objects = dictionaries(&p, &x, &y, &[("S2", &r2)], &extra);
objects.extend(s2(&p, &r2, &y));
objects.extend([g("0", "DICTIONARY"), g("5", &f), g("102", "{ACAD_REACTORS"), g("330", &x), g("102", "}"), g("330", &x)]);
objects.extend([g("100", "AcDbDictionary"), g("281", "1"), g("3", "Walls"), g("350", &fr)]);
objects.extend([g("0", "XRECORD"), g("5", &fr), g("102", "{ACAD_REACTORS"), g("330", &f), g("102", "}"), g("330", &f), g("100", "AcDbXrecord")]);
objects.extend([g("280", "1"), g("1", "A*")]);
let file = inject(&base, &x, objects);
let mut text = file;
for round in 0..2 {
let d = read(text.as_bytes(), "f.dxf").unwrap();
assert_eq!(d.layer_states.iter().map(|s| s.name.as_str()).collect::<Vec<_>>(), ["S2"], "round {round}");
text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let xdicts: Vec<String> = table.windows(2).filter(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).collect();
assert_eq!(xdicts.len(), 1, "round {round}");
let xd = &xdicts[0];
let (_, dict) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(xd.as_str())).unwrap();
let keys: Vec<&str> = dict.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.as_str()).collect();
assert_eq!(keys, ["ACAD_LAYERSTATES", "ACAD_LAYERFILTERS"], "round {round}");
// The filters dictionary is owned by the written one, and so is its filter by it.
let fh = dict.windows(2).find(|w| w[0] == g("3", "ACAD_LAYERFILTERS")).map(|w| w[1].1.clone()).unwrap();
let (_, fd) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(fh.as_str())).unwrap();
let owner = fd.iter().filter(|(c, _)| c == "330").map(|(_, v)| v.as_str()).collect::<Vec<_>>();
assert_eq!(owner, [xd.as_str(), xd.as_str()], "round {round}: reactor and owner");
let walls = value(fd, "350").unwrap();
let (_, wr) = recs.iter().find(|(k, gs)| k == "XRECORD" && value(gs, "5") == Some(walls)).unwrap();
assert!(wr.contains(&g("330", &fh)) && wr.contains(&g("1", "A*")), "round {round}");
// The kept dictionary itself is not written a second time.
assert_eq!(recs.iter().filter(|(k, gs)| k == "DICTIONARY" && gs.iter().any(|(c, v)| c == "3" && v == "ACAD_LAYERFILTERS")).count(), 1);
}
// With every state deleted the filters stay, in the table's own dictionary, and AutoCAD's states
// don't come back.
let mut d = read(text.as_bytes(), "f.dxf").unwrap();
d.layer_states.clear();
let text = write_dxf(&d);
assert!(!text.contains("ACAD_LAYERSTATES"));
let p = pairs(&text);
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let xd = table.windows(2).find(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).unwrap();
let (_, dict) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(xd.as_str())).unwrap();
assert_eq!(dict.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.as_str()).collect::<Vec<_>>(), ["ACAD_LAYERFILTERS"]);
assert!(read(text.as_bytes(), "g.dxf").unwrap().layer_states.is_empty());
}
#[test]
fn entries_whose_names_differ_only_in_case_open_as_one_state() {
// AutoCAD 2024 opens the entries `S` and `s` of one ACAD_LAYERSTATES dictionary as one state:
// named as the first entry in the dictionary and holding the last entry's record (measured with
// the records in one file order and the entries in both dictionary orders, so the first entry's
// record came first in the file once and last once). Here S2's record (mask 2047) comes first in
// the file, then state T's, then S7's (66049); the merged state stays where S2's record is.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, r7, rt) = (h(1), h(2), h(3), h(4), h(5));
let states = |d: &Drawing| d.layer_states.iter().map(|s| (s.name.clone(), s.mask)).collect::<Vec<_>>();
for (pair, name, mask) in [([("S", r2.as_str()), ("s", r7.as_str())], "S", 66049), ([("s", r7.as_str()), ("S", r2.as_str())], "s", 2047)] {
let entries = [pair[0], ("T", rt.as_str()), pair[1]];
let mut objects = dictionaries(&p, &x, &y, &entries, &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &rt, &y));
objects.extend(s7(&p, &r7, &y));
let d = read(inject(&base, &x, objects).as_bytes(), "case.dxf").unwrap();
let want = [(name.to_string(), mask), ("T".to_string(), 66049)];
assert_eq!(states(&d), want, "{entries:?}");
// Written back, they are the states AutoCAD opened.
let back = read(write_dxf(&d).as_bytes(), "back.dxf").unwrap();
assert_eq!(states(&back), want, "{entries:?}");
}
// A record the dictionary lists as `s` but another object owns isn't a state, and doesn't stand
// in for S's record either.
let mut objects = dictionaries(&p, &x, &y, &[("S", r2.as_str()), ("s", r7.as_str())], &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &r7, &x));
let d = read(inject(&base, &x, objects).as_bytes(), "stray.dxf").unwrap();
assert_eq!(states(&d), [("S".to_string(), 2047)]);
}
#[test]
fn view_snapshots_and_names_twice_in_another_case_stay_in_cadcrafts_record() {
let mut d = drawing();
for name in ["Plan", "*VIEW Front", "PLAN", "Wände", "WÄNDE", "", " "] {
d.layer_states.push(LayerState::new(name, d.layers.clone(), "A"));
}
let text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, states) =
recs.iter().find(|(k, gs)| k == "DICTIONARY" && gs.contains(&g("281", "1")) && gs.iter().any(|(c, v)| c == "3" && v == "Plan")).unwrap();
// (The DXF writes "ä" as \U+00E4.)
let keys: Vec<String> = states.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.replace("\\U+00E4", "ä")).collect();
assert_eq!(keys, ["Plan", "Wände"], "AutoCAD's dictionary holds the first of each name");
assert!(text.contains("CADCRAFT_LAYERSTATES"));
let back = read(text.as_bytes(), "v.dxf").unwrap();
// AutoCAD's states first, then CADCraft's own.
// (A blank name can't be a key of AutoCAD's dictionary: those stay in CADCraft's record too.)
let want: Vec<LayerState> = [0, 3, 1, 2, 4, 5, 6].iter().map(|&i| d.layer_states[i].clone()).collect();
assert_eq!(back.layer_states, want);
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "v.dwg").unwrap();
assert_eq!(read(&dwg, "v.dwg").unwrap().layer_states, want);
}
}
#[test]
fn a_layer_of_an_xref_gets_group_93() {
// AutoCAD 2024 writes 93 (0 for a newly attached xref) after the lineweight of an xref's layer
// only (measured with a self-built xref).
let mut d = drawing();
d.layers.push(Layer::new("XR|L1"));
d.layer_states.push(LayerState::new("X", d.layers.clone(), "0"));
let p = pairs(&write_dxf(&d));
let recs = records(&p);
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
let start = rec.iter().position(|(c, _)| c == "302").unwrap() + 1;
let mut with_93 = Vec::new();
let mut layer = String::new();
for (i, (c, v)) in rec.iter().enumerate().skip(start) {
match c.as_str() {
"330" => layer.clone_from(v),
"93" => {
assert_eq!((v.as_str(), rec[i - 1].0.as_str(), rec[i + 1].0.as_str()), ("0", "370", "331"));
with_93.push(layer.clone());
}
_ => {}
}
}
assert_eq!(with_93, [record_handle(&p, "LAYER", "XR|L1")]);
}
#[test]
fn named_plot_styles_are_written_by_placeholder() {
// In a drawing of named plot styles AutoCAD 2024 writes a layer's plot style as group 390, the
// handle of the style's placeholder object (measured); CADCraft reads it back by that handle.
let mut d = drawing();
d.header.set_i64("PSTYLEMODE", 0);
let a = d.layers.iter().position(|l| l.name == "A").unwrap();
d.layers[a].plot_style = "Thick".into();
d.layer_states.push(LayerState::new("N", d.layers.clone(), "0"));
// No layer uses Thick any more: its placeholder is written for the state.
d.layers[a].plot_style = "Normal".into();
let text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, names) = recs.iter().find(|(k, _)| k == "ACDBDICTIONARYWDFLT").unwrap();
let thick = names.windows(2).find(|w| w[0] == g("3", "Thick")).map(|w| w[1].1.clone()).unwrap();
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
assert!(rec.contains(&g("390", &thick)) && !rec.iter().any(|(c, _)| c == "1"), "{rec:?}");
let back = read(text.as_bytes(), "n.dxf").unwrap();
assert_eq!(back.layer_states[0].layers.iter().find(|l| l.name == "A").unwrap().plot_style, "Thick");
assert_eq!(back.layer_states, d.layer_states);
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "n.dwg").unwrap();
assert_eq!(read(&dwg, "n.dwg").unwrap().layer_states, d.layer_states);
}
}
#[test]
fn a_state_in_both_records_is_read_from_autocads() {
// A file of an earlier CADCraft keeps its states in CADCraft's record; AutoCAD then saves a state
// of the same name in its own dictionary: AutoCAD's is the one read.
let mut d = drawing();
d.layer_states.push(LayerState::new("S", d.layers.clone(), "A"));
d.layer_states.push(LayerState::new("*VIEW S", d.layers.clone(), "B"));
let text = write_dxf(&d);
assert!(text.contains("*VIEW S"));
let text = text.replace("*VIEW S", "S");
let back = read(text.as_bytes(), "both.dxf").unwrap();
assert_eq!(back.layer_states.iter().map(|s| (s.name.as_str(), s.current.as_str())).collect::<Vec<_>>(), [("S", "A")]);
}
#[test]
fn states_past_the_limit_are_left_out_and_the_rest_come_in_file_order() {
// A hostile file with one state more than the reader keeps (100 000): the last one in the file
// is left out, and the others come in file order, here the reverse of their names' order.
const LIMIT: u64 = 100_000;
let base = write_dxf(&drawing());
let p = pairs(&base);
let first = u64::from_str_radix(&fresh(&p, 0), 16).unwrap();
let h = |k: u64| format!("{:X}", first + k);
let (x, y) = (h(1), h(2));
let names: Vec<String> = (0..=LIMIT).map(|i| format!("S{:06}", LIMIT + 1 - i)).collect();
let records: Vec<String> = (0..=LIMIT).map(|i| h(3 + i)).collect();
let entries: Vec<(&str, &str)> = names.iter().map(String::as_str).zip(records.iter().map(String::as_str)).collect();
let mut objects = dictionaries(&p, &x, &y, &entries, &[]);
for r in &records {
objects.extend([g("0", "XRECORD"), g("5", r), g("330", &y), g("100", "AcDbXrecord")]);
objects.extend([g("280", "1"), g("91", "2047"), g("301", ""), g("290", "0"), g("302", "0")]);
}
let d = read(inject(&base, &x, objects).as_bytes(), "many.dxf").unwrap();
let names: Vec<&str> = d.layer_states.iter().map(|s| s.name.as_str()).collect();
assert_eq!(names.len(), 100_000);
assert_eq!((names.first().copied(), names.get(1).copied(), names.last().copied()), (Some("S100001"), Some("S100000"), Some("S000002")));
}
#[test]
fn a_record_twice_in_a_file_is_one_state() {
// A damaged file can hold an object twice under one handle: one state.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r7) = (h(1), h(2), h(4));
let mut objects = dictionaries(&p, &x, &y, &[("S7", &r7)], &[]);
objects.extend(s7(&p, &r7, &y));
objects.extend(s7(&p, &r7, &y));
let d = read(inject(&base, &x, objects).as_bytes(), "twice.dxf").unwrap();
assert_eq!(d.layer_states.iter().map(|s| s.name.as_str()).collect::<Vec<_>>(), ["S7"]);
}
#[test]
fn group_92_without_the_true_colour_prefix_is_not_a_true_colour() {
// AutoCAD 2024 writes 92 only for a true colour, 0xC2RRGGBB (measured); a value with another
// high byte (not seen from AutoCAD) leaves the colour index of group 62.
let text = autocad_file().replace("92\n-1039526882", "92\n-1023410175");
let d = read(text.as_bytes(), "c3.dxf").unwrap();
assert_eq!(d.layer_states[0].layers.iter().find(|l| l.name == "A").unwrap().color, Color::Index(168));
}
+1
View File
@@ -32,6 +32,7 @@ mod groups_roundtrip;
mod hatch_assoc_roundtrip;
mod hatch_pattern_def;
mod helix_roundtrip;
mod layer_states_acad;
mod layout_limits_roundtrip;
mod layout_paper_units;
mod layout_plot_window;
+1 -1
View File
@@ -185,7 +185,7 @@ pub(super) fn layer_states() -> Case {
layer.on = false;
layer.locked = true;
}
drawing.layer_states.push(LayerState { name: "Saved".into(), layers });
drawing.layer_states.push(LayerState::new("Saved", layers, "0"));
Case { name: "drawing/layer-state".into(), drawing }
}
+15 -5
View File
@@ -492,11 +492,16 @@ const OBJECTS: &str = "
330 61
100 AcDbXrecord
280 1
91 0
91 2047
301 Plan
8 WALLS
90 0
290 0
302 0
330 11
90 8
62 1
370 -3
1 Normal
440 0
0 DICTIONARY
5 63
330 10
@@ -803,14 +808,19 @@ fn ucs_layer_states_and_block_descriptions_are_kept() {
assert_eq!((u.origin.x, u.origin.y, u.origin.z), (1.0, 2.0, 3.0));
assert_eq!((u.x_axis.y, u.y_axis.x), (1.0, -1.0));
assert_eq!(d.block("DOOR").map(|b| b.description.as_str()), Some("A door leaf"));
let states: Vec<(&str, Vec<&str>)> =
d.layer_states.iter().map(|s| (s.name.as_str(), s.layers.iter().map(|l| l.name.as_str()).collect())).collect();
assert_eq!(states, [("Plan", vec!["WALLS"])]);
for o in [&a, &b] {
// Layer states live in the LAYER table's extension dictionary.
// Layer states live in the LAYER table's extension dictionary, each layer named by its
// handle (as AutoCAD 2024 writes them; CADCraft reads and rewrites them).
let table = o.of("TABLE").into_iter().find(|t| s(t, 2) == "LAYER").expect("LAYER table");
let [xd] = group(table, "ACAD_XDICTIONARY").try_into().expect("LAYER table extension dictionary");
let (_, dict) = o.handle(&xd).expect("dictionary");
let (_, states) = o.entry(dict, "ACAD_LAYERSTATES").expect("ACAD_LAYERSTATES");
let (_, plan) = o.entry(states, "Plan").expect("layer state Plan");
assert_eq!((s(plan, 301), s(plan, 8)), ("Plan".into(), "WALLS".into()));
let layers = plan.iter().skip_while(|t| t.code != 302).filter(|t| t.code == 330).map(Tag::str).collect::<Vec<_>>();
assert_eq!((s(plan, 301), layers), ("Plan".into(), vec![h(o.named("LAYER", "WALLS"))]));
}
}
-8
View File
@@ -308,14 +308,6 @@ fn key_from(name: &str) -> Option<egui::Key> {
}
pub fn handle(app: &mut CadApp, ctx: &egui::Context, req: &ControlRequest) -> Outcome {
let out = handle_request(app, ctx, req);
// A command the request ran may have asked for a bar (MENUBAR, TOOLBAR): apply it before
// the next request, so a later query or `ui.set` sees the bars as they are now.
app.sync_bars();
out
}
fn handle_request(app: &mut CadApp, ctx: &egui::Context, req: &ControlRequest) -> Outcome {
let p = &req.params;
let s = |k: &str| p.get(k).and_then(Value::as_str);
let f = |k: &str| p.get(k).and_then(Value::as_f64);
+1 -94
View File
@@ -316,10 +316,6 @@ pub fn command(app: &mut crate::CadApp, reset: bool, params: &Value) -> Result<V
}
/// Validate and repair the stored workspace, sync it with the app, and render the dock panels; a failed restore falls back to the default layout with a status message.
/// Draw the docked workspace: restore or fall back from the persisted layout, render every
/// panel body plus the header close buttons, and apply the resulting actions through
/// [`command`]. Bodies may dispatch commands, so the canonical workspace is published before
/// rendering while the layout snapshot stays immutable.
pub fn show(app: &mut crate::CadApp, ui: &mut egui::Ui) {
let t = crate::theme::Tokens::get();
let mut workspace = app.ui.docking.clone();
@@ -352,33 +348,7 @@ pub fn show(app: &mut crate::CadApp, ui: &mut egui::Ui) {
if let Some(panel) = app.raise_panel.take() {
area = area.raise_panel(panel);
}
let (mut output, header_close) = {
let mut panels = Panels { app, close: None };
let output = area.show_content(ui, &workspace.layout, &style, &mut panels);
(output, panels.close)
};
// Accordion title bars are rendered by the shared surface without a header callback, so
// place the same close button over their title bar, left of the stock collapse control.
let mut close = header_close;
for panel in stack_panels(&workspace.layout) {
if !permissions(&panel).closable {
continue;
}
let Some(title) = ui.ctx().read_response(egui::Id::unique("cadcraft-docking").with(("tab", panel))) else { continue };
if !title.rect.is_positive() {
continue;
}
let rect = egui::Rect::from_center_size(
egui::pos2(title.rect.right() - 18.0 - CLOSE_BUTTON * 0.5 - 4.0, title.rect.center().y),
egui::vec2(CLOSE_BUTTON, CLOSE_BUTTON),
);
if close_button(ui, panel, rect) {
close = Some(panel);
}
}
if let Some(panel) = close {
output.actions.push(Action::Close { panel });
}
let mut output = area.show_content(ui, &workspace.layout, &style, &mut Panels { app });
// Keys typed in a floating panel's own OS window run the main window's shortcuts and
// command line; files dropped on one open like files dropped on the main window.
app.forward_native_input(ui.ctx(), std::mem::take(&mut output.forwarded_events), output.forwarded_modifiers);
@@ -423,55 +393,9 @@ pub fn native_input_blocked(app: &crate::CadApp, ctx: &egui::Context) -> bool {
/// The panels' contents, names, size limits and icons for the dock area.
pub struct Panels<'a> {
pub app: &'a mut crate::CadApp,
/// The panel whose header close button was clicked this frame.
pub close: Option<Panel>,
}
/// Size of a panel header's close button, in points.
const CLOSE_BUTTON: f32 = 16.0;
/// The accessible name of a header's close button. One translated template carries both the
/// verb and the panel name, so a catalog translates the whole name instead of leaving an
/// English verb in front of a translated panel label.
fn close_label(panel: Panel) -> String {
crate::tf!("Close {panel}", panel = crate::i18n::t(panel.label()))
}
/// A visible close button for a panel header. It runs the same action as the tab context
/// menu's "Close panel"; the accessible name includes the panel so the headers stay distinct.
fn close_button(ui: &mut egui::Ui, panel: Panel, rect: egui::Rect) -> bool {
let t = crate::theme::Tokens::get();
let response = ui.interact(rect, egui::Id::unique("cadcraft-docking").with(("close", panel.id())), egui::Sense::click());
let label = close_label(panel);
crate::icons::describe_control(ui, &response, &label, None, false);
if response.hovered() {
ui.painter().rect_filled(rect.expand(2.0), 2.0, t.control_hover.gamma_multiply(0.6));
}
crate::icons::paint(ui.painter(), rect, crate::icons::Icon::Close, false);
response.on_hover_text(crate::tl!("Close panel")).clicked()
}
/// Panels whose title bar is an accordion entry rather than a tab group header.
fn stack_panels(layout: &Layout<Panel>) -> Vec<Panel> {
let mut panels = Vec::new();
let mut nodes: Vec<&Node<Panel>> = layout.root.iter().collect();
while let Some(node) = nodes.pop() {
match node {
Node::Split { first, second, .. } => {
nodes.push(first);
nodes.push(second);
}
Node::Stack { entries } => panels.extend(entries.iter().map(|entry| entry.panel)),
// Tab groups draw their own header; nothing else stacks an accordion entry.
_ => {}
}
}
panels
}
impl DockContent<Panel> for Panels<'_> {
/// Render `panel`'s existing view; Layers, Properties and External References scroll
/// independently, and the drawing canvas paints its own background before the view.
fn body(&mut self, ui: &mut egui::Ui, panel: &Panel) {
let app = &mut *self.app;
match panel {
@@ -521,23 +445,6 @@ impl DockContent<Panel> for Panels<'_> {
crate::icons::paint(painter, rect, icon, false);
true
}
/// Reserve header space for the close button only when `active` may be closed, so the
/// drawing view's title gets no empty gap.
fn group_header_width(&self, _panels: &[Panel], active: &Panel, _floating: bool, _strip_width: f32) -> f32 {
if permissions(active).closable { CLOSE_BUTTON + 8.0 } else { 0.0 }
}
/// Draw the close button at the right edge of a tab-group header and remember the panel
/// to close once the docking surface has returned, so layout changes stay outside rendering.
fn group_header(&mut self, ui: &mut egui::Ui, _panels: &[Panel], active: &Panel, _floating: bool) {
let header = ui.max_rect();
let rect = egui::Rect::from_center_size(
egui::pos2(header.right() - CLOSE_BUTTON * 0.5 - 4.0, header.center().y),
egui::vec2(CLOSE_BUTTON, CLOSE_BUTTON),
);
if close_button(ui, *active, rect) {
self.close = Some(*active);
}
}
}
fn panel_limits(panel: &Panel) -> PanelLimits {
-3
View File
@@ -139,13 +139,11 @@
Clip Viewport Delimitar ventana gráfica
Clipboard Portapapeles
Close Cerrar
Close {panel} Cerrar {panel}
Close All Cerrar todo
Close All Other Drawings Cerrar todos los demás dibujos
Close Array Editing Cerrar la edición de matriz
Close Comparison Cerrar comparación
Export Comparison Exportar comparación
Close panel Cerrar panel
Closed Cerrada
Coincident Coincidente
Collapse Palettes Contraer paletas
@@ -544,7 +542,6 @@
Measure Medir
Measure Distance Medir distancia
Measure Geometry Medir geometría
Menu Bar Barra de menús
Merge Cells Combinar celdas
Merged PRs PR integradas
Mid Between 2 Points Punto medio entre 2 puntos
1 # CADCraft Spanish interface catalog — original translations.
139
140
141
142
143
144
145
146
147
148
149
542
543
544
545
546
547
-1
View File
@@ -146,7 +146,6 @@ fn missing_marked_ui_literals(language: &str) -> BTreeSet<String> {
"chrome",
"cmdline",
"credits",
"docking",
"dialogs",
"hatchdlg",
"aliasdlg",
-3
View File
@@ -143,13 +143,11 @@
Xref Clip Frame Рамка обрізки зовнішнього посилання
Clipboard Буфер обміну
Close Закрити
Close {panel} Закрити {panel}
Close All Закрити всі
Close All Other Drawings Закрити всі інші креслення
Closed Замкнений
Close Comparison Закрити порівняння
Export Comparison Експортувати порівняння
Close panel Закрити панель
Coincident Збіг
Collapse Palettes Згорнути палітри
Collapse Tool Sets Згорнути набори інструментів
@@ -536,7 +534,6 @@
Measure Розмітити
Measure Distance Виміряти відстань
Measure Geometry Виміряти геометрію
Menu Bar Рядок меню
Merge Cells Об'єднати комірки
Merged PRs Об'єднані PR
Mid Between 2 Points Середина між 2 точками
1 # CADCraft Ukrainian interface catalog — original translations by @dmatviichuk.
143
144
145
146
147
148
149
150
151
152
153
534
535
536
537
538
539
-1
View File
@@ -928,7 +928,6 @@
Time 时间
To get started, create or open a drawing. 若要开始,请创建或打开一个图形。
Tool Bar 工具栏
Menu Bar 菜单栏
Tool Sets 工具集
Tools 工具
Torus 圆环体
1 # CADCraft Simplified Chinese interface catalog — original translations.
928
929
930
931
932
933
+1 -85
View File
@@ -283,9 +283,6 @@ pub struct CadApp {
pub system_animations: Option<bool>,
/// What `ui.system_cursor` goes back to when the interface is reset ([`Self::set_system_cursor_default`]).
pub system_cursor_default: bool,
/// Whether the host has a native menu bar: off where the menus stay in the window
/// ([`Self::set_native_menus`]).
pub native_menus: bool,
pub session: Session,
pub ui: UiState,
/// The interface's own preferences from the Options dialog ([`options`]).
@@ -384,7 +381,6 @@ impl CadApp {
system_languages: Vec::new(),
system_animations: None,
system_cursor_default: false,
native_menus: cfg!(target_os = "macos"),
session,
ui: UiState::default(),
options: options::UiOptions::default(),
@@ -592,11 +588,7 @@ impl CadApp {
if let Some(r) = menus::run_ui_command(self, id, &params) {
return r;
}
// The bars as the interface shows them now (a `ui.set` may have just changed one), and any
// MENUBAR or TOOLBAR request applied at once.
self.sync_bars();
let r = self.session.execute(id, &params).map_err(|e| e.to_string());
self.sync_bars();
if let Ok(v) = &r
&& let Some(m) = v.get("message").and_then(Value::as_str)
{
@@ -615,7 +607,6 @@ impl CadApp {
if menus::run_ui_command(self, name, &Value::Null).is_some() {
return;
}
self.sync_bars();
if let Err(e) = self.session.start(name) {
self.session.echo(e.to_string());
}
@@ -631,7 +622,6 @@ impl CadApp {
/// command or system variable) runs `fallback` instead: Enter on a partly typed name accepts
/// the highlighted AutoComplete suggestion.
pub fn cmdline_or(&mut self, text: &str, fallback: Option<&str>) -> Option<String> {
self.sync_bars();
if !self.session.prompting() {
let first = text.split_whitespace().next().unwrap_or("");
// `cmd {json}` is a programmatic call: the engine runs it with those parameters.
@@ -646,9 +636,7 @@ impl CadApp {
return None;
}
}
let r = self.session.cmdline(text);
self.sync_bars();
let e = match (r, fallback) {
let e = match (self.session.cmdline(text), fallback) {
(Ok(()), _) => return None,
(Err(cadcraft_engine::EngineError::UnknownCommand(_)), Some(f)) => return self.cmdline(f),
(Err(e), _) => e.to_string(),
@@ -657,18 +645,6 @@ impl CadApp {
Some(e)
}
/// Apply a menu bar / tool bar change MENUBAR or TOOLBAR asked for, and report the bars shown.
fn sync_bars(&mut self) {
let b = std::mem::take(&mut self.session.bars_request);
if let Some(on) = b.menubar {
self.ui.in_window_menu = on;
}
if let Some(show) = b.toolbar {
self.ui.show_toolbar = show;
}
self.session.bars_shown = cadcraft_engine::cmd::interface::InterfaceBars { menubar: self.ui.in_window_menu, toolbar: self.ui.show_toolbar };
}
/// The theme the interface shows now (the choice resolved against the OS appearance).
pub fn shown_theme(&self) -> egui::Theme {
self.shown_theme.unwrap_or_else(|| self.ui.theme.resolve(None))
@@ -755,15 +731,6 @@ impl CadApp {
}
}
/// Tell the interface whether the host has a native menu bar. Where it has none, the
/// in-window menu is the only menu, so it is shown and a reset keeps it.
pub fn set_native_menus(&mut self, on: bool) {
self.native_menus = on;
if !on {
self.ui.in_window_menu = true;
}
}
pub fn set_status(&mut self, s: impl Into<String>) {
self.status = Some((s.into(), now_ms()));
}
@@ -1120,7 +1087,6 @@ impl CadApp {
/// Draw one UI pass: title/toolbar, optional menu/status bar/file tabs, the standalone tool-set strip when a drawing is shown but Tool Sets is not docked, docking or the start page, and the floating overlays; record `frame_ms`. Runs on every pass, including one egui later discards.
fn draw(&mut self, ui: &mut egui::Ui) {
let t0 = now_ms();
self.sync_bars();
control::begin_frame(ui.ctx());
let t = theme::Tokens::get();
chrome::title_and_toolbar(self, ui);
@@ -1442,54 +1408,4 @@ mod tests {
let ui: UiState = serde_json::from_value(json!({ "saveFormat": "dwg" })).unwrap_or_default();
assert_eq!(ui.save_format, SaveFormat::Dwg);
}
#[test]
fn options_reset_brings_the_interface_back() {
// Hiding the interface (View/Window toggles) can leave no way back — on Windows the
// in-window menu bar is the only menu there is. Options > Reset must restore it (#1240).
let mut a = app();
a.run("ui.toggle.toolbar", json!({ "on": false })).unwrap();
a.run("ui.toggle.menubar", json!({ "on": cfg!(target_os = "macos") })).unwrap();
a.start("ui.hidepalettes");
assert!(!a.ui.show_toolbar && !a.ui.show_palettes && !a.ui.show_toolsets);
assert_eq!(a.ui.in_window_menu, cfg!(target_os = "macos"), "the test did not hide the menu bar");
a.run("options", json!({ "reset": true })).unwrap();
assert!(a.ui.show_toolbar, "the tool bar is still hidden");
assert!(a.ui.show_palettes, "the palettes are still hidden");
assert!(a.ui.show_toolsets);
assert_eq!(a.ui.in_window_menu, !cfg!(target_os = "macos"), "the menu bar did not come back");
}
#[test]
fn options_reset_keeps_the_menu_where_the_host_has_no_native_one() {
// With CADCRAFT_NO_NATIVE_MENU=1 the menus stay in the window: the host reports no native
// menu bar, so the in-window one is the only menu and the reset must leave it (#1240).
let mut a = app();
a.set_native_menus(false);
assert!(a.ui.in_window_menu, "the host's setting did not show the in-window menu");
a.run("ui.toggle.menubar", json!({ "on": false })).unwrap();
a.run("options", json!({ "reset": true })).unwrap();
assert!(a.ui.in_window_menu, "the only menu bar did not come back");
// Beside a native menu bar, the reset returns to the platform default.
a.set_native_menus(true);
a.run("ui.toggle.menubar", json!({ "on": true })).unwrap();
a.run("options", json!({ "reset": true })).unwrap();
assert!(!a.ui.in_window_menu, "the in-window menu is not the default beside a native one");
}
#[test]
fn options_reset_keeps_the_users_shortcuts_and_folders() {
// The reset brings hidden bars back (#1240); it must not also lose the user's own
// keyboard shortcuts or the folders the file pickers remember.
let mut a = app();
a.ui.shortcuts.insert("line".into(), "Ctrl+Shift+L".into());
a.ui.last_lisp_dir = Some("lisp-folder".into());
a.ui.last_pgp_dir = Some("pgp-folder".into());
a.run("ui.toggle.toolbar", json!({ "on": false })).unwrap();
a.run("options", json!({ "reset": true })).unwrap();
assert!(a.ui.show_toolbar, "the tool bar is still hidden");
assert_eq!(a.ui.shortcuts.get("line").map(String::as_str), Some("Ctrl+Shift+L"), "the reset lost a user shortcut");
assert_eq!(a.ui.last_lisp_dir.as_deref(), Some("lisp-folder"));
assert_eq!(a.ui.last_pgp_dir.as_deref(), Some("pgp-folder"));
}
}
+2 -9
View File
@@ -797,20 +797,13 @@ fn switch_on_hover(ctx: &egui::Context, titles: &[egui::Response]) {
}
}
/// Activate a menu command. QuickCalc toggles transparently, and Reference Manager closes its
/// palette when it is open (typed XREF only opens it); other items clear pending command-line
/// text and start their command interactively.
/// Activate a menu command. QuickCalc toggles transparently; other items clear pending
/// command-line text and start their command interactively.
pub fn activate(app: &mut CadApp, id: &str) {
if id == "ui.toggle.quickcalc" {
run_transparent(app, id);
return;
}
if id == "xref" && app.ui.docking.layout.contains(&crate::docking::Panel::ExternalRefs) {
if let Err(e) = crate::xrefs::close_palette(app) {
app.set_status(e);
}
return;
}
app.cmd.buffer.clear();
app.start(id);
}
+6 -23
View File
@@ -434,30 +434,13 @@ fn apply_right_click(o: &mut UiOptions, c: &UiChanges) {
/// The interface preferences back to their defaults (the interface language stays).
fn reset_ui(app: &mut CadApp) {
// Everything interface, back to its defaults: a hidden menu bar, tool bar, palettes or
// panels and a rearranged panel layout come back — once the menu bar is hidden there may be
// no other way to reach the toggles (#1240). The interface language stays; the open dialog,
// the start tab, the recent files and the remembered folders are state, not preferences, and
// stay too. The user's keyboard shortcuts are their own customisation, which Window > Reset
// Palettes keeps as well: a reset meant to bring a bar back must not lose them.
let (language, dialog, start_tab) = (app.ui.interface_language, app.ui.dialog.take(), app.ui.start_tab);
let recent_files = std::mem::take(&mut app.ui.recent_files);
let shortcuts = std::mem::take(&mut app.ui.shortcuts);
let (last_lisp_dir, last_pgp_dir) = (app.ui.last_lisp_dir.take(), app.ui.last_pgp_dir.take());
app.ui = crate::UiState {
interface_language: language,
dialog,
start_tab,
recent_files,
shortcuts,
last_lisp_dir,
last_pgp_dir,
..Default::default()
};
// Where the host has no native menu bar the in-window one is the only menu: the reset must
// leave it in place (#1240).
app.ui.in_window_menu = !app.native_menus;
let d = crate::UiState::default();
app.ui.theme = d.theme;
app.ui.animations = d.animations;
app.ui.save_format = d.save_format;
app.ui.save_version = d.save_version;
app.ui.system_cursor = app.system_cursor_default;
app.ui.history_lines = d.history_lines;
app.options = UiOptions::default();
}
-6
View File
@@ -42,12 +42,6 @@ fn open_palette(app: &mut CadApp) -> Result<Value, String> {
crate::docking::command(app, false, &json!({ "operation": "open", "panel": Panel::ExternalRefs.id() }))
}
/// Close the palette: Window ▸ Reference Manager while it is open, as Window ▸ QuickCalc closes
/// QuickCalc (#2273).
pub(crate) fn close_palette(app: &mut CadApp) -> Result<Value, String> {
crate::docking::command(app, false, &json!({ "operation": "close", "panel": Panel::ExternalRefs.id() }))
}
/// A picked file inside the host drawing's folder is attached by its relative path, so the
/// project folder can move.
fn relative_to_host(app: &CadApp, picked: &str) -> String {
+1 -60
View File
@@ -123,7 +123,7 @@ fn palette_icons_are_painted_in_code_and_shown_in_an_iconic_column() {
let ctx = egui::Context::default();
let mut paint = |panel: Panel| {
let mut painted = false;
let mut content = Panels { app: &mut app, close: None };
let mut content = Panels { app: &mut app };
let mut output = ctx.run_ui(egui::RawInput::default(), |ui| {
let painter = ui.ctx().layer_painter(egui::LayerId::background());
let rect = egui::Rect::from_min_size(egui::Pos2::ZERO, vec2(20.0, 20.0));
@@ -593,62 +593,3 @@ fn group_drag_bar_moves_the_whole_group_into_the_other_dock() {
assert_eq!(frames(layout), [[Panel::Canvas]]);
assert_eq!(h.state().session.doc().unwrap(), &document);
}
/// Guard that every closable panel header offers a visible close button: a docked tab group,
/// the default accordion stack, and a floating group. Each click must remove the panel, the
/// button must not cover the title, and the tab context menu must still close the same panel.
#[test]
fn every_panel_header_has_a_close_button_that_closes_like_the_context_menu() {
let mut h = harness(None, 1280.0, 1.0);
assert!(h.query_by_label("Close Tool Sets").is_some(), "docked tab headers show a close button");
assert!(h.query_by_label("Close Drawing").is_none(), "the drawing view is not a closable panel");
// External References opens as a tabbed pane; its button sits beside the title, not over it.
h.state_mut().run("ui.dock", json!({"operation":"open","panel":"externalReferences"})).unwrap();
h.run_steps(4);
assert!(h.state().ui.docking.layout.contains(&Panel::ExternalRefs));
let close = h.get_by_label("Close External References").rect();
let title = h.get_by_role_and_label(egui::accesskit::Role::Tab, "External References").rect();
assert!(!close.intersects(title), "the close button does not cover the panel title");
h.get_by_label("Close External References").click();
h.run_steps(4);
assert!(!h.state().ui.docking.layout.contains(&Panel::ExternalRefs));
// Accordion headers (the default Layers/Properties stack) get one too.
assert!(h.state().ui.docking.layout.contains(&Panel::Layers));
h.get_by_label("Close Layers").click();
h.run_steps(4);
assert!(!h.state().ui.docking.layout.contains(&Panel::Layers));
// The context menu still closes the same panel after it is reopened.
h.state_mut().run("ui.dock", json!({"operation":"open","panel":"layers"})).unwrap();
h.run_steps(4);
assert!(h.state().ui.docking.layout.contains(&Panel::Layers));
h.get_by_role_and_label(egui::accesskit::Role::Tab, "Layers").click_button(PointerButton::Secondary);
h.run_steps(3);
// The docking surface's stock tab menu item ("Close Panel"), not our tooltip.
h.get_by_label("Close Panel").click();
h.run_steps(4);
assert!(!h.state().ui.docking.layout.contains(&Panel::Layers));
// Floating panels get the same button in their group header.
h.state_mut().run("ui.dock", json!({"operation":"float","panel":"properties","rect":[400,250,300,350]})).unwrap();
h.run_steps(4);
h.get_by_label("Close Properties").click();
h.run_steps(4);
assert!(!h.state().ui.docking.layout.contains(&Panel::Properties));
}
/// The accessible name is one translated string, not an English verb glued to a translated
/// panel label: Spanish readers must hear "Cerrar Capas", never "Close Capas".
#[test]
fn spanish_close_button_accessible_name_is_localized_as_a_whole() {
let mut h = harness(None, 1280.0, 1.0);
h.state_mut().run("ui.language", json!({"lang": "es"})).unwrap();
h.run_steps(4);
assert!(h.query_by_label("Cerrar Capas").is_some(), "the accordion close button is named in Spanish");
assert!(h.query_by_label("Cerrar Propiedades").is_some(), "every panel's close button follows the language");
assert!(h.query_by_label("Close Capas").is_none(), "no English verb survives the translation");
h.get_by_label("Cerrar Capas").click();
h.run_steps(4);
assert!(!h.state().ui.docking.layout.contains(&Panel::Layers), "the localized name still closes its panel");
}
-19
View File
@@ -252,22 +252,3 @@ fn selection_highlight_settings_set_save_and_show_in_the_selection_tab() {
assert!(text.contains(label), "{label} missing from:\n{text}");
}
}
#[test]
fn reset_brings_back_hidden_menu_bar_toolbar_and_status_bar() {
// #1240: with the in-window menu bar, the toolbar and the status bar hidden, OPTIONS ▸ Reset
// to Defaults (typed, or from the right-click menu) is the way back.
let mut a = app();
let d = cadcraft_ui_egui::UiState::default();
a.ui.in_window_menu = !d.in_window_menu;
a.ui.show_toolbar = false;
a.ui.show_status_bar = false;
a.ui.show_command_line = false;
a.ui.show_palettes = false;
a.run("options", json!({"reset": true})).unwrap();
assert_eq!(a.ui.in_window_menu, d.in_window_menu);
assert_eq!(a.ui.show_toolbar, d.show_toolbar);
assert_eq!(a.ui.show_status_bar, d.show_status_bar);
assert_eq!(a.ui.show_command_line, d.show_command_line);
assert_eq!(a.ui.show_palettes, d.show_palettes);
}
-107
View File
@@ -1,107 +0,0 @@
//! MENUBAR and TOOLBAR at the command line bring a hidden menu bar and tool bar back (#1341):
//! on Windows and Linux the in-window menu bar is the only menu, so with it hidden typing these
//! is the way back, as in AutoCAD.
use cadcraft_engine::Session;
use cadcraft_ui_egui::{CadApp, Services};
use serde_json::json;
fn app() -> CadApp {
CadApp::new(Session::new(), Services::default())
}
#[test]
fn typed_menubar_shows_and_hides_the_menu_bar() {
let mut app = app();
app.ui.in_window_menu = false;
app.cmdline("MENUBAR");
assert_eq!(app.session.prompt_text(), "MENUBAR Enter new value for MENUBAR <0>:");
app.cmdline("1");
assert!(app.session.running.is_none());
assert!(app.ui.in_window_menu);
// 0 hides it again; anything else is refused and asked again.
app.cmdline("MENUBAR");
app.cmdline("2");
assert!(app.session.running.is_some(), "still asking");
app.cmdline("0");
assert!(!app.ui.in_window_menu);
}
#[test]
fn typed_toolbar_shows_the_tool_bar_by_default() {
let mut app = app();
app.ui.show_toolbar = false;
app.cmdline("TOOLBAR");
assert_eq!(app.session.prompt_text(), "TOOLBAR Enter tool bar option or [Show/Hide] <Show>:");
app.cmdline("");
assert!(app.ui.show_toolbar);
app.cmdline("TOOLBAR");
app.cmdline("H");
assert!(!app.ui.show_toolbar);
}
#[test]
fn the_json_forms_report_and_set_the_bars() {
let mut app = app();
app.ui.in_window_menu = true;
app.ui.show_toolbar = false;
app.cmdline("MENUBAR");
app.cmdline("");
assert_eq!(app.session.execute("menubar", &json!({})).unwrap(), json!({ "value": 1 }));
assert_eq!(app.session.execute("toolbar", &json!({})).unwrap(), json!({ "show": false }));
app.session.execute("toolbar", &json!({ "show": true })).unwrap();
app.cmdline("MENUBAR");
app.cmdline("");
assert!(app.ui.show_toolbar && app.ui.in_window_menu);
assert!(app.session.execute("menubar", &json!({ "value": 3 })).is_err());
}
/// MENUBAR changes only the menu bar: a tool bar change made before the request is applied
/// stays (a control-API `ui.set` can come between them).
#[test]
fn menubar_leaves_a_later_tool_bar_change() {
let mut app = app();
app.ui.in_window_menu = true;
app.ui.show_toolbar = true;
app.session.execute("menubar", &json!({ "value": 0 })).unwrap();
app.ui.show_toolbar = false;
app.cmdline("'REDRAW");
assert!(!app.ui.in_window_menu, "MENUBAR applied");
assert!(!app.ui.show_toolbar, "the tool bar keeps its later change");
}
/// A bar query through `CadApp::run` reports the bars as the interface shows them now, even when
/// a UI change came just before it with no frame drawn in between.
#[test]
fn a_bar_query_sees_a_ui_change_just_made() {
let mut app = app();
app.ui.show_toolbar = true;
assert_eq!(app.run("toolbar", json!({})).unwrap(), json!({ "show": true }));
app.ui.show_toolbar = false;
assert_eq!(app.run("toolbar", json!({})).unwrap(), json!({ "show": false }));
app.run("toolbar", json!({ "show": true })).unwrap();
assert!(app.ui.show_toolbar, "the request is applied at once");
}
#[test]
fn menubar_started_from_the_ui_offers_the_bar_as_shown_now() {
let mut app = app();
app.ui.in_window_menu = true;
app.cmdline("");
app.ui.in_window_menu = false;
app.start("menubar");
let prompt = app.session.prompt_text();
assert!(prompt.contains("<0>"), "{prompt}");
}
#[test]
fn enter_through_the_control_api_applies_the_bar_before_the_next_request() {
let mut app = app();
let ctx = egui::Context::default();
app.ui.show_toolbar = false;
app.start("toolbar");
let (req, _pending) = cadcraft_ui_egui::control::ControlRequest::new("cmdline.key", serde_json::json!({ "key": "enter" }));
cadcraft_ui_egui::control::handle(&mut app, &ctx, &req);
assert!(app.session.running.is_none());
assert!(app.ui.show_toolbar, "TOOLBAR's default Show is applied before the next request");
}
+1 -18
View File
@@ -5,7 +5,7 @@ use cadcraft_engine::Session;
use cadcraft_engine::cmd::file::{IoHooks, set_io};
use cadcraft_engine::doc::geom::Vec3;
use cadcraft_engine::doc::{Drawing, Entity, EntityKind, Handle, Layer, Line, XrefStatus};
use cadcraft_ui_egui::{CadApp, Services, docking::Panel, menus};
use cadcraft_ui_egui::{CadApp, Services, docking::Panel};
use egui::vec2;
use egui_kittest::Harness;
use egui_kittest::kittest::Queryable;
@@ -71,23 +71,6 @@ fn xref_opens_the_palette_and_its_buttons_manage_the_xref() {
h.get_by_label("site");
}
/// Window ▸ Reference Manager closes the palette when it is open, like Window ▸ QuickCalc; typed,
/// XREF only ever opens it (#2273).
#[test]
fn the_window_menu_item_closes_an_open_palette() {
let mut app = CadApp::new(Session::default(), Services::default());
let open = |app: &CadApp| app.ui.docking.layout.contains(&Panel::ExternalRefs);
menus::activate(&mut app, "xref");
assert!(open(&app), "the menu item opens the palette");
menus::activate(&mut app, "xref");
assert!(!open(&app), "the menu item closes the open palette");
menus::activate(&mut app, "xref");
assert!(open(&app), "and opens it again");
assert!(app.cmdline("XREF").is_none());
assert!(app.cmdline("XR").is_none());
assert!(open(&app), "typed XREF keeps it open");
}
#[test]
fn json_xref_lists_and_never_opens_the_palette() {
let mut app = CadApp::new(Session::default(), Services::default());
-6
View File
@@ -144,12 +144,6 @@ The shortcut also works with text-field focus. Toggling preserves the running dr
and pending command-line input. The expression, history and calculator variables survive
closing/reopening within the same session; they are not saved across application restarts.
The External References palette (`externalReferences`) is not part of the default arrangement
either. Typed `XREF`/`XR` opens and activates it. **Window > Reference Manager** (also
`ui.menu.invoke` with `xref`) opens it too, but closes it when it is present, as Window >
QuickCalc does; closing leaves the running command and command-line input alone. `xref` with
JSON parameters lists the references and never opens or closes the palette.
Invoke these UI commands through `engine.execute`, for example `{"command":"ui.dock","params":{"operation":"float","panel":"layers","rect":[100,100,320,440]}}`.
Advanced `ui.dock` operations use the same validated transaction as pointer gestures: