Compare commits

..
29 Commits
Author SHA1 Message Date
Tanish MankuandAldo Zarate d1d2e5788a Stack u1: #1555: tests for clicks made while moving in STRETCH, MOVE and TRIM
#1001 names STRETCH and TRIM; #1555's tests cover MOVE, idle picks,
window corners and CPOLYGON. These cases from #1059 check that a click
made while the mouse moves counts where the button went down in
STRETCH (pick and window), MOVE (pick, and a slow drag is a window),
TRIM, with no command running, with PICKDRAG off, at a click-click
window's second corner, and over overlapping objects with selection
cycling. #1059's fast-long-drag case is left out: under the press-first
model a quick release is a click however far the mouse went.

Co-authored-by: Aldo Zarate <azarate@azf.com.mx>
2026-11-19 15:25:16 -07:00
Tanish Mankuandaustin62jake fa4b6d136d Stack u1: #1555: a slow click on a grip makes it hot
#1555 acts on presses where the button goes down, but leaves grips (no
command running) to egui's click. egui calls a press held longer than
0.8 s a drag, and on a drawing that draws slowly an ordinary click lasts
that long, so the grip ignored it (#2813).

A press on a grip is now remembered and clicks the grip when the button
comes up within the press tolerance, however long it was held; a drag
from it still does nothing. #2853's slow-click tests come along: the
grip case fails without this change, the others pin press-first clicks
across slow frames.

Co-authored-by: austin62jake <340374338+austin62jake@users.noreply.github.com>
2026-11-19 15:25:16 -07:00
Tanish Manku 9787da7015 Stack u1: #1748: rustfmt the Right-Click Customization window's mode groups 2026-11-19 15:25:04 -07:00
Tanish Manku 6ff59c0ada Merge #3183: TRIM/EXTEND: Space enters an option at the mode, projection and edge prompts 2026-11-19 15:23:01 -07:00
Tanish Manku d49ea7e586 Stack u1: #1748: Default and Edit modes decide only with the time-sensitive right-click off
With #1748 a quick right-click between commands is Enter whenever the
time-sensitive right-click is on, and a longer click opens the shortcut
menu. Main's Right-Click Customization (#2371) still let Default and Edit
modes set to "Repeat last command" take every idle right-click, so a
longer click repeated the command instead of opening the menu.

As in AutoCAD, the modes now apply with the time-sensitive right-click
off, and the window greys them out with it on, as it does Command mode.
The Right-Click Customization tests set the option off where they test
the modes; a new test holds the button with both modes on repeat.
2026-11-19 15:22:58 -07:00
Tanish Manku 9a4347a08d Merge #1748: a quick right-click is Enter between commands too
# Conflicts:
#	contributors/people.toml
#	crates/ui-egui/src/canvas.rs
#	crates/ui-egui/src/context_menu.rs
#	crates/ui-egui/src/options.rs
#	docs/ui-parity.md
2026-11-19 15:21:49 -07:00
Tanish Manku 48a18c882b Merge #2070: show pickbox-only cursor at command object-selection prompts
# Conflicts:
#	crates/ui-egui/src/canvas.rs
2026-11-19 15:19:55 -07:00
Tanish Manku 1341b42127 Merge #1555: Canvas: clicks count when the button goes down, even while the mouse moves
# Conflicts:
#	crates/ui-egui/tests/it/main.rs
2026-11-19 15:19:39 -07:00
The old Dutch Guy 79784a62fe Merge branch 'main' into feat/pickbox-only-cursor 2026-11-18 18:03:45 +01:00
The old Dutch Guy 38888cd5d9 Merge branch 'main' into feat/pickbox-only-cursor 2026-11-18 11:28:53 +01:00
The old Dutch Guy 97e5c7ff37 Merge branch 'main' into feat/pickbox-only-cursor 2026-11-16 17:28:53 +01:00
The old Dutch Guy 54015120db fix(tests): restore missing closing brace in canvas tests 2026-11-16 17:17:10 +01:00
The old Dutch Guy 60b0f21edb feat(ui): show pickbox-only cursor at object selection prompts 2026-11-16 17:17:10 +01:00
jayzed80 8db82ebf7c TRIM/EXTEND: Space enters an option at the mode, projection and edge prompts (#3092) 2026-11-15 09:38:01 +00:00
filforce95andClaude Opus 5.5 60c4f0d439 docs: leave ui-parity.md to the maintainers
PRs no longer edit the progress docs (CLAUDE.md, Roadmap); the affected row is
named in the PR description instead.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 17:01:57 +01:00
filforce95andClaude Opus 5.5 a762140d4e Merge origin/main into feat/press-first-clicks-1001
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 11:06:47 +01:00
filforce95andClaude Opus 5.5 e7c3cf9223 Merge origin/main into feat/press-first-clicks-1001
main split canvas.rs into canvas/ modules and show() into helpers (#2187),
moved to egui 0.37 (#2119) and tightened Clippy (#2239). The press detector is
carried over to that structure: handle_presses replaces collect_prompt_clicks
(#835's release replay) and the egui drag-window block; selection cycling
(#1149) and PICKDRAG 0 (#1032) behave as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 22:08:52 +01:00
Sladrian PedrosoandClaude Opus 5.5 f8423bb44f Merge main into right-click-enter-between-commands
canvas.rs: main moved most of the canvas into canvas/ and documented
show(); the right-click change stays where it was, in show().
time_sensitive_right_click paints a frame after Escape before the next
quick click: with egui 0.37 the shortcut menu closes on the frame after.
people.toml and docs/ui-parity.md: both sides kept.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 11:14:58 -03:00
filforce95 0703ae91b4 Merge remote-tracking branch 'origin/main' into feat/press-first-clicks-1001
# Conflicts:
#	docs/ui-parity.md
2026-10-24 09:24:06 +02:00
filforce95andClaude Opus 5.5 d75e2a0ae0 test: press_first_clicks joins the ui-egui test binary (#1989)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 19:50:50 +02:00
filforce95 0c7b7ec469 Merge remote-tracking branch 'origin/main' into feat/press-first-clicks-1001 2026-10-23 19:45:42 +02:00
filforce95andClaude Opus 5.5 b5f6df8fec test(pickdrag): the second corner is set where the button goes down
With clicks counting on press (#1001), a press after the first corner
closes the window there even with PICKDRAG 0; letting go elsewhere after
a drag changes nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:31:43 +02:00
filforce95andClaude Opus 5.5 5fa1352d82 Merge main into feat/press-first-clicks-1001
Resolve the canvas conflicts with selection cycling (#1149) and the
two-click preference (#1032): cycling opens and picks on the press, and
with PICKDRAG off a drag no longer closes the window its press opened.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:23:59 +02:00
Sladrian PedrosoandClaude Opus 5.5 25714cac28 docs/ui-parity.md: with the time-sensitive right-click off, a right-click opens the command menu while a command runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:11:05 -03:00
Sladrian PedrosoandClaude Opus 5.5 8709920931 Document canvas::show, the drawing area for one frame
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:58:04 -03:00
Sladrian PedrosoandClaude Opus 5.5 77b9560729 contributors: add my real name for the About window credits
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:58:38 -03:00
Sladrian PedrosoandClaude Opus 5.5 80bbcb98ba A quick right-click is Enter between commands too: it runs the typed command or repeats the last one (fixes #1387)
With the time-sensitive right-click on (the default), a quick right-click
was Enter only while a command ran, and it sent a bare Enter even when
something was typed. Between commands every right-click opened the shortcut
menu, so typing `rec` and right-clicking opened the menu instead of starting
RECTANG, and at an empty prompt it didn't repeat the last command as AutoCAD
does.

A quick right-click now does what the Enter key does (cmdline::submit): it
enters what was typed (a command name, `@10,0`), ends the input of a running
command, and between commands repeats the last one. Held, it still opens the
command menu or the shortcut menu; a grip with options keeps its menu;
Shift/Ctrl+right-click is still the object snap menu; with the time-sensitive
right-click turned off, every right-click opens the menu. With nothing typed
and no command run yet, a quick click opens the shortcut menu (there is
nothing to enter).

time_sensitive_right_click now also checks that a quick click between
commands repeats LINE, a held one opens the menu with Repeat LINE and repeats
nothing, a typed `circle` starts CIRCLE and a typed `5,5` enters its centre;
these checks fail without the change. docs/ui-parity.md describes the new
behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:58:37 -03:00
filforce95andClaude Opus 5.5 023b833fd4 docs(ui-parity): a press on an object picks it; a drag from it opens no window (#1001)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 12:08:56 +02:00
filforce95andClaude Opus 5.5 06e53f3ee7 fix(canvas): clicks count when the button goes down, even while the mouse moves (fixes #1001, #1546)
Every click on the drawing used to be decided when the button came up: egui
calls a press that travels more than a few points a drag, so a click made
while the hand was still moving was lost (object picks, the second corner of a
click-click window) or taken where the hand had got to (points, #835).

Following the model agreed in #1001, a press now acts at once, where the button
went down: it places the point (snapped as the cursor would be there), picks
the object or sets a selection window's corner. Each press among a frame's
events counts, so a slow frame keeps all its clicks (#815). What the pointer
does while the button is held only decides whether the press becomes a drag:
once it leaves a 6-point tolerance a 0.25 s timer starts; a button still down
then is a drag and closes the window its press opened where it comes up, while
a button that comes up sooner was a click and the window waits for the next
press. Holding still never makes a drag.

The detector lives in canvas/press.rs. Grips with no command running, ZOOM
Realtime, the Dynamic Input options menu, model tiles and double-clicks keep
their release-based clicks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 11:55:23 +02:00
49 changed files with 1325 additions and 2759 deletions
+5
View File
@@ -128,3 +128,8 @@ sync_github_name = true
[people.tyrel]
real_name = "Tyrel Haveman"
[people.Sladrian]
real_name = "Sladrian Pedroso"
display_name = "Sladrian Pedroso"
sync_github_name = false
+1 -39
View File
@@ -931,49 +931,11 @@ pub struct Ucs {
pub y_axis: Vec3,
}
/// A saved layer state (LAYERSTATE), as AutoCAD keeps one in the LAYER table's
/// `ACAD_LAYERSTATES` dictionary.
/// A saved layer state (LAYERSTATE).
#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
#[serde(default)]
pub struct LayerState {
pub name: String,
pub layers: Vec<Layer>,
/// The properties restoring sets ([`LayerState::ON`] …): AutoCAD's mask (group 91 of the
/// state's XRECORD). Bits CADCraft doesn't use are kept as read.
pub mask: u32,
/// The layer restoring makes current; empty, or a layer the drawing doesn't have, leaves the
/// current layer as it is (AutoCAD 2024, measured).
pub current: String,
/// Group 301 of the state's XRECORD: empty as AutoCAD 2024's -LAYER saves a state; a text a
/// file holds there is kept.
pub description: String,
}
impl Default for LayerState {
fn default() -> Self {
LayerState { name: String::new(), layers: Vec::new(), mask: LayerState::ALL, current: String::new(), description: String::new() }
}
}
impl LayerState {
pub const ON: u32 = 1;
pub const FROZEN: u32 = 2;
pub const LOCKED: u32 = 4;
pub const PLOT: u32 = 8;
pub const VP_FREEZE_NEW: u32 = 16;
pub const COLOR: u32 = 32;
pub const LINETYPE: u32 = 64;
pub const LINEWEIGHT: u32 = 128;
pub const PLOT_STYLE: u32 = 256;
pub const TRANSPARENCY: u32 = 1024;
/// Every property: the mask of AutoCAD 2024's -LAYER stAte Save with its defaults (2047; bit
/// 512, which no property toggles, is always set).
pub const ALL: u32 = 2047;
/// A state of every property of `layers`, with `current` the layer restoring makes current.
pub fn new(name: impl Into<String>, layers: Vec<Layer>, current: impl Into<String>) -> Self {
LayerState { name: name.into(), layers, current: current.into(), ..LayerState::default() }
}
}
/// A named group of entities (GROUP).
+12 -72
View File
@@ -27,10 +27,6 @@ mod edit;
/// Most preview entities drawn while the array is edited.
const PREVIEW_LIMIT: usize = 2000;
/// Most objects whose key points are searched for a Key point base point.
const MAX_KEY_OBJECTS: usize = 10_000;
/// The prompt after the Key point option of a base point.
const KEY_POINT_PROMPT: &str = "Specify key point on source objects to use as base point";
/// Keyword-only prompts: each typed token is matched on its own (no free text).
const KEYWORDS: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
@@ -45,13 +41,13 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("arrayrect", "Rectangular Array", run_arrayrect)
.menu(&["Modify", "Array", "Rectangular Array"])
.params(
"{handles?, rows, cols, rowSpacing, colSpacing, levels? (1), levelSpacing?, rowElevation?, axisAngle? (degrees), base? ([x, y], default the objects' centre), keyPoint? ([x, y]: the base point is the objects' key point nearest it), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
"{handles?, rows, cols, rowSpacing, colSpacing, levels? (1), levelSpacing?, rowElevation?, axisAngle? (degrees), base? ([x, y], default the objects' centre), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
)
.interactive(|_| Ok(Box::new(RectM::default()))),
CommandSpec::new("arraypolar", "Polar Array", run_arraypolar)
.menu(&["Modify", "Array", "Polar Array"])
.params(
"{handles?, center, count, angle? (degrees, default 360), rotate?: bool, rows? (1), rowSpacing?, rowElevation?, levels? (1), levelSpacing?, base? ([x, y], default the first object's centre), keyPoint? ([x, y]: the base point is the objects' key point nearest it), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
"{handles?, center, count, angle? (degrees, default 360), rotate?: bool, rows? (1), rowSpacing?, rowElevation?, levels? (1), levelSpacing?, base? ([x, y], default the first object's centre), associative?: bool (default ARRAYASSOCIATIVITY, on)} → {handle (the array, when associative), created (copies)}",
)
.interactive(|_| Ok(Box::new(PolarM::default()))),
CommandSpec::new("-array", "Array", classic::run_classic)
@@ -250,45 +246,6 @@ fn bounds(d: &Drawing, hs: &[Handle]) -> Bounds2 {
hs.iter().filter_map(|h| d.entity(*h).map(|e| cadcraft_doc::entity_bounds(d, e, 0))).fold(Bounds2::EMPTY, |a, b| a.union(&b))
}
/// The key point of `ents`, placed by `m`, nearest `at`: one of their grips (end points,
/// midpoints, centres, vertices, insertion points). `None` when they have none. More than
/// [`MAX_KEY_OBJECTS`] objects are refused: searching only some could miss the nearest one.
pub(crate) fn nearest_key_point<'a>(ents: impl Iterator<Item = &'a Entity>, m: &Mat3, at: Vec2) -> Result<Option<Vec2>> {
if !at.is_finite() {
return Ok(None);
}
let mut best: Option<(Vec2, f64)> = None;
for (n, e) in ents.enumerate() {
if n >= MAX_KEY_OBJECTS {
return Err(other(format!("Too many objects to search for a key point (at most {MAX_KEY_OBJECTS}); specify a point.")));
}
let mut k = e.kind.clone();
k.transform(m);
for g in k.grips().into_iter().filter(|g| g.is_finite()) {
let d = g.dist(at);
if best.is_none_or(|(_, bd)| d < bd) {
best = Some((g, d));
}
}
}
Ok(best.map(|b| b.0))
}
/// `keyPoint` of a JSON form: absent or null is none; anything else must be a point, rather than
/// be taken as none and the base point found another way.
pub(crate) fn key_point_param(cmd: &str, p: &Value) -> Result<Option<Vec2>> {
match p.get("keyPoint") {
None | Some(Value::Null) => Ok(None),
Some(_) => point_param(p, "keyPoint").map(Some).ok_or_else(|| bad(cmd, "`keyPoint` must be a point [x, y]")),
}
}
/// The key point of objects `hs` in the drawing nearest `at`.
pub(crate) fn key_point_of(d: &Drawing, hs: &[Handle], at: Vec2) -> Result<Vec2> {
nearest_key_point(hs.iter().filter_map(|h| d.entity(*h)).map(|e| &**e), &Mat3::IDENTITY, at)?
.ok_or_else(|| other("The objects have no key point; specify a point."))
}
/// The centre of the first object (the point a non-rotated polar copy is moved by).
fn first_center(d: &Drawing, hs: &[Handle]) -> Option<Vec2> {
hs.first().and_then(|h| d.entity(*h)).map(|e| cadcraft_doc::entity_bounds(d, e, 0).center()).filter(|c| c.is_finite())
@@ -429,10 +386,9 @@ fn run_arrayrect(s: &mut Session, p: &Value) -> Result<Value> {
row_elevation: f64_or(p, "rowElevation", 0.0),
});
let rs = f64_or(p, "rowSpacing", 1.0);
let base = match (key_point_param("arrayrect", p)?, point_param(p, "base")) {
(Some(k), _) => key_point_of(s.doc()?, &hs, k)?,
(None, Some(b)) => b,
(None, None) => Some(bounds(s.doc()?, &hs).center()).filter(|c| c.is_finite()).unwrap_or_default(),
let base = match point_param(p, "base") {
Some(b) => b,
None => Some(bounds(s.doc()?, &hs).center()).filter(|c| c.is_finite()).unwrap_or_default(),
};
let p2 = params(kind, levels, f64_or(p, "levelSpacing", rs));
let associative = bool_or(p, "associative", assoc_default(s));
@@ -446,10 +402,7 @@ fn run_arraypolar(s: &mut Session, p: &Value) -> Result<Value> {
let rows = count_or("arraypolar", p, "rows", 1)?;
let levels = count_or("arraypolar", p, "levels", 1)?;
check_size(s, n.saturating_mul(rows).saturating_mul(levels), hs.len())?;
let base = match key_point_param("arraypolar", p)? {
Some(k) => key_point_of(s.doc()?, &hs, k)?,
None => point_param(p, "base").or_else(|| s.doc().ok().and_then(|d| first_center(d, &hs))).unwrap_or(c),
};
let base = point_param(p, "base").or_else(|| s.doc().ok().and_then(|d| first_center(d, &hs))).unwrap_or(c);
let row_spacing = f64_or(p, "rowSpacing", 1.0);
let fill = f64_or(p, "angle", 360.0);
if !(fill.abs() >= 1e-9 && fill.abs() <= 360.0 + 1e-9) {
@@ -550,8 +503,6 @@ enum RStage {
Main,
Assoc,
Base,
/// Base point: Key point (a grip of the source objects).
BaseKey,
/// COUnt: columns, then rows.
CountCols,
CountRows,
@@ -712,7 +663,6 @@ impl Interactive for RectM {
.default("eXit"),
Assoc => assoc_prompt(self.assoc),
Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
CountCols | ColsCount => cols(),
CountRows | RowsCount => rows(),
SpaceCols => dist("Specify the distance between columns", self.cs).kw(&["Unit cell"]),
@@ -762,12 +712,10 @@ impl Interactive for RectM {
self.base = self.centroid;
Main
}
(Base, Input::Keyword(_)) => BaseKey,
(BaseKey, Input::Point(p)) => {
self.base = key_point_of(s.doc()?, &self.objs, *p)?;
Main
(Base, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
Base
}
(BaseKey, Input::Enter) => Base,
(CountCols | ColsCount, _) => match count(&i, self.cols, max_count(s, self.rows.saturating_mul(self.levels), n))? {
Some(c) => {
self.cols = c;
@@ -910,9 +858,6 @@ enum PStage {
Main,
Assoc,
Base,
/// Key point of the base point asked from the center prompt, or from the main prompt.
CenterBaseKey,
BaseKey,
Items,
Between,
Fill,
@@ -1089,7 +1034,6 @@ impl Interactive for PolarM {
match self.stage {
Center => Prompt::new("Specify center point of array", Accept::POINT).kw(&["Base point", "Axis of rotation"]),
CenterBase | Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
CenterBaseKey | BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
Main => Prompt::new("Select grip to edit array", Accept::POINT)
.kw(&["ASsociative", "Base point", "Items", "Angle between", "Fill angle", "ROWs", "Levels", "ROTate items", "eXit"])
.default("eXit"),
@@ -1148,14 +1092,10 @@ impl Interactive for PolarM {
self.base = None;
if stage == CenterBase { Center } else { Main }
}
(CenterBase, Input::Keyword(_)) => CenterBaseKey,
(Base, Input::Keyword(_)) => BaseKey,
(CenterBaseKey | BaseKey, Input::Point(p)) => {
self.base = Some(key_point_of(s.doc()?, &self.objs, *p)?);
if stage == CenterBaseKey { Center } else { Main }
(CenterBase | Base, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
stage
}
(CenterBaseKey, Input::Enter) => CenterBase,
(BaseKey, Input::Enter) => Base,
(Items, _) => match count(&i, self.items, max_count(s, self.rows.saturating_mul(self.levels), n))? {
Some(c) => {
self.items = c;
+10 -49
View File
@@ -18,9 +18,7 @@ use super::super::helpers::v3;
use super::super::machines::{SelOutcome, SelectPhase, number};
use super::super::{CommandSpec, bad, bool_or, point_param, targets};
use super::{
KEY_POINT_PROMPT, KEYWORDS, angle, check_size, count, fmt, key_point_of, key_point_param, nearest_key_point, nesting, other, yes, yes_no,
};
use super::{KEYWORDS, angle, check_size, count, fmt, nesting, other, yes, yes_no};
use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
pub(super) fn specs() -> Vec<CommandSpec> {
@@ -28,7 +26,7 @@ pub(super) fn specs() -> Vec<CommandSpec> {
CommandSpec::new("arrayedit", "Edit Array", run_arrayedit)
.menu(&["Modify", "Object", "Array"])
.params(
"{handle, cols?, rows?, colSpacing?, rowSpacing?, axisAngle? (degrees), rowElevation?, levels?, levelSpacing?, items?, angle? (fill, degrees), angleBetween?, rotate?: bool, center? ([x, y]), base? ([x, y], the new base point), reset?: bool, replace?: {handles, base? ([x, y], default the objects' centre), items: [[i, j, level]…] | \"source\"}, keyPoint? ([x, y]: the new base point is the source objects' key point nearest it, on the item there), replace?.keyPoint? ([x, y]: the replacement objects' key point nearest it is their base point), source?: {item? ([i, j, level], default [0, 0, 0])} (places the source objects for editing; ARRAYCLOSE ends)}",
"{handle, cols?, rows?, colSpacing?, rowSpacing?, axisAngle? (degrees), rowElevation?, levels?, levelSpacing?, items?, angle? (fill, degrees), angleBetween?, rotate?: bool, center? ([x, y]), base? ([x, y], the new base point), reset?: bool, replace?: {handles, base? ([x, y], default the objects' centre), items: [[i, j, level]…] | \"source\"}, source?: {item? ([i, j, level], default [0, 0, 0])} (places the source objects for editing; ARRAYCLOSE ends)}",
)
.interactive(|_| Ok(Box::new(EditM::default()))),
CommandSpec::new("arrayclose", "Close Array Editing", run_arrayclose)
@@ -217,16 +215,6 @@ fn item_at(d: &Drawing, h: Handle, at: Vec2, tol: f64) -> Option<(u32, u32, u32)
best.map(|b| b.0)
}
/// ARRAYEDIT Key point: the key point of the source objects nearest `at`, with the objects as
/// placed at the item under `at` (within `tol`).
fn source_key_point(d: &Drawing, h: Handle, at: Vec2, tol: f64) -> Result<Vec2> {
let item = item_at(d, h, at, tol).ok_or_else(|| other("No array item there; specify a point on an item of the array."))?;
let (ins, blk, p) = array_of(d, h)?;
let src = d.block(&p.source).ok_or_else(|| other("The array's source block is missing."))?;
let m = ins.transform(blk.base.xy()).then_before(item_place(&p, item)?).then_before(Mat3::translate(-src.base.xy()));
nearest_key_point(src.entities.iter().map(|e| e.as_ref()), &m, at)?.ok_or_else(|| other("The source objects have no key point; specify a point."))
}
/// Move the base point of array `h` to world point `base` without moving the items.
fn rebase(s: &mut Session, h: Handle, base: Vec2) -> Result<()> {
let d = s.doc()?;
@@ -355,9 +343,6 @@ fn close_source(s: &mut Session, save: bool) -> Result<Value> {
// ---------------- JSON ----------------
/// How far outside an item's extents a JSON `keyPoint` may be.
const KEY_POINT_TOLERANCE: f64 = 1e-6;
fn item_param(v: &Value) -> Option<(u32, u32, u32)> {
let a = v.as_array()?;
let n = |k: usize| a.get(k).and_then(Value::as_u64).and_then(|x| u32::try_from(x).ok());
@@ -464,7 +449,9 @@ fn fill_from_between(b: f64, items: u32) -> Result<f64> {
fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
let h = super::super::curves::handle_param(p, "handle").ok_or_else(|| bad("arrayedit", "`handle` (the array) is required"))?;
refuse_while_editing(s)?;
array_of(s.doc()?, h)?;
let (ins, blk, _) = array_of(s.doc()?, h)?;
let w = ins.transform(blk.base.xy());
let to_local = w.inverse().ok_or_else(|| other("The array's scale is zero."))?;
if bool_or(p, "reset", false) {
let (_, _, mut a) = array_of(s.doc()?, h)?;
a.replaced.clear();
@@ -472,10 +459,7 @@ fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
}
if let Some(r) = p.get("replace").filter(|v| !v.is_null()) {
let hs = targets(s, r)?;
let base = match key_point_param("arrayedit", r)? {
Some(k) => key_point_of(s.doc()?, &hs, k)?,
None => point_param(r, "base").unwrap_or_else(|| s.doc().map(|d| centroid(d, &hs)).unwrap_or_default()),
};
let base = point_param(r, "base").unwrap_or_else(|| s.doc().map(|d| centroid(d, &hs)).unwrap_or_default());
let name = block_from(s, h, &hs, base)?;
let (_, _, mut a) = array_of(s.doc()?, h)?;
match r.get("items") {
@@ -493,13 +477,7 @@ fn run_arrayedit(s: &mut Session, p: &Value) -> Result<Value> {
if let Some(b) = point_param(p, "base") {
rebase(s, h, b)?;
}
if let Some(k) = key_point_param("arrayedit", p)? {
let at = source_key_point(s.doc()?, h, k, KEY_POINT_TOLERANCE)?;
rebase(s, h, at)?;
}
// A new base point moves the array's insertion point: read `center` in its placement after.
let (ins, blk, mut a) = array_of(s.doc()?, h)?;
let to_local = ins.transform(blk.base.xy()).inverse().ok_or_else(|| other("The array's scale is zero."))?;
let (_, _, mut a) = array_of(s.doc()?, h)?;
let before = a.clone();
apply_params(&mut a, p, &to_local)?;
if a != before {
@@ -529,8 +507,6 @@ enum Stage {
Select,
Main,
Base,
/// Base point: Key point (of the source objects).
BaseKey,
ColsCount,
ColsSpace,
ColsTotal,
@@ -548,8 +524,6 @@ enum Stage {
/// REPlace: objects, their base point, then the items to replace.
RepSelect,
RepBase,
/// REPlace base point: Key point (of the replacement objects).
RepKey,
RepItems,
/// Source: the item whose objects are placed for editing.
SourceItem,
@@ -685,7 +659,6 @@ impl Interactive for EditM {
.kw(&["Source", "REPlace", "Base point", "Rows", "Columns", "Levels", "RESet", "eXit"])
.default("eXit"),
Base => Prompt::new("Specify base point", Accept::POINT).kw(&["Key point"]).default("centroid"),
BaseKey => Prompt::new(KEY_POINT_PROMPT, Accept::POINT),
ColsCount => Prompt::new("Enter the number of columns", Accept::NUMBER).default(cols.to_string()),
ColsSpace => dist("Specify the distance between columns", cs).kw(&["Total"]),
ColsTotal => dist("Specify the distance between the first and last column", total(cols, cs)),
@@ -714,7 +687,6 @@ impl Interactive for EditM {
Rotate => Prompt::new("Rotate arrayed items?", KEYWORDS).kw(&["Yes", "No"]).default(yes(polar.as_ref().is_none_or(|k| k.rotate))),
RepSelect => Prompt::new("Select replacement objects", Accept::SELECT),
RepBase => Prompt::new("Select base point of replacement objects", Accept::POINT).kw(&["Key point"]).default("centroid"),
RepKey => Prompt::new("Specify key point on replacement objects to use as base point", Accept::POINT),
RepItems => Prompt::new("Select an item in array to replace", Accept::POINT).kw(&["Source objects"]),
SourceItem => Prompt::new("Select item in array", Accept::POINT),
}
@@ -774,21 +746,10 @@ impl Interactive for EditM {
}
Main
}
(Base, Input::Keyword(_)) => BaseKey,
(RepBase, Input::Keyword(_)) => RepKey,
(BaseKey, Input::Point(p)) => {
let tol = s.pixel_size() * s.settings.pickbox;
let at = source_key_point(s.doc()?, h, *p, tol)?;
rebase(s, h, at)?;
Main
(Base | RepBase, Input::Keyword(_)) => {
s.echo("Key points are not available yet; specify a point.");
stage
}
(BaseKey, Input::Enter) => Base,
(RepKey, Input::Point(p)) => {
let base = key_point_of(s.doc()?, &self.rep_objs, *p)?;
self.rep_block = Some(block_from(s, h, &self.rep_objs.clone(), base)?);
RepItems
}
(RepKey, Input::Enter) => RepBase,
(ColsCount | Items, _) => match count(&i, c64, self.max_for(s, r64.saturating_mul(l64)))? {
Some(n) => {
let n = super::count32(n);
+6 -164
View File
@@ -4,7 +4,6 @@
use cadcraft_doc::color::Color;
use cadcraft_doc::{AttribProps, Common, EntityKind, HAlign, Handle, Text, VAlign};
use cadcraft_geom::Vec3;
use serde_json::{Map, Value, json};
use crate::cmd::curves::KW;
@@ -154,19 +153,6 @@ fn set_value(text: &mut Text, value: String) {
}
}
/// Move `text` so the point it is placed by lands on `to`: the alignment point of justified text,
/// else the insertion point. Both points move by the same offset, so aligned and fit text keep the
/// baseline between them.
fn move_text(text: &mut Text, to: cadcraft_geom::Vec2) {
let anchor = match text.align_pt {
Some(ap) if !matches!((text.halign, text.valign), (HAlign::Left, VAlign::Baseline) | (HAlign::Aligned | HAlign::Fit, _)) => ap,
_ => text.insert,
};
let d = Vec3::new(to.x - anchor.x, to.y - anchor.y, 0.0);
text.insert = text.insert + d;
text.align_pt = text.align_pt.map(|ap| ap + d);
}
/// Change the properties set on attribute `k` of block reference `h`.
fn set_props(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut AttribProps)) -> Result<()> {
s.doc_mut()?.modify_entity(h, |e| {
@@ -179,18 +165,6 @@ fn set_props(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut Attri
Ok(())
}
/// Modify the attribute `k` of block reference `h`.
fn modify_attrib(s: &mut Session, (h, k): (Handle, usize), f: impl FnOnce(&mut cadcraft_doc::Attrib)) -> Result<()> {
s.doc_mut()?.modify_entity(h, |e| {
if let EntityKind::Insert(ins) = &mut e.kind
&& let Some(a) = ins.attribs.get_mut(k)
{
f(a);
}
})?;
Ok(())
}
/// The layer and colour attribute `k` of block reference `h` is drawn with: its own, else its
/// definition's (layer 0 is the reference's layer).
fn current_props(s: &Session, (h, k): (Handle, usize)) -> Option<(String, Color)> {
@@ -206,14 +180,6 @@ fn current_props(s: &Session, (h, k): (Handle, usize)) -> Option<(String, Color)
Some((layer, c.color))
}
/// The current text properties of attribute `k` of block reference `h`.
fn current_text(s: &Session, (h, k): (Handle, usize)) -> Option<cadcraft_doc::Text> {
let d = s.doc().ok()?;
let e = d.entity(h)?;
let EntityKind::Insert(ins) = &e.kind else { return None };
ins.attribs.get(k).map(|a| a.text.clone())
}
/// Replace every `find` in `value` with `with`, unless the result would be too long.
fn replaced(value: &str, find: &str, with: &str) -> Option<String> {
if find.is_empty() || !value.contains(find) {
@@ -326,10 +292,6 @@ enum Stage {
Select,
/// One at a time: what to do with the current attribute.
Option,
Position,
Height,
Angle,
Style,
ValueKind,
NewValue,
Layer,
@@ -403,7 +365,6 @@ impl Interactive for DashAtteditM {
}
fn prompt(&self, s: &Session) -> Prompt {
let cur = self.items.get(self.cur).and_then(|it| current_props(s, *it));
let cur_text = self.items.get(self.cur).and_then(|it| current_text(s, *it));
match self.stage {
Stage::OneAtATime => Prompt::new("Edit attributes one at a time?", KW).kw(&["Yes", "No"]).default("Y"),
Stage::VisibleOnly => Prompt::new("Edit only attributes visible on screen?", KW).kw(&["Yes", "No"]).default("Y"),
@@ -411,31 +372,7 @@ impl Interactive for DashAtteditM {
Stage::TagSpec => Prompt::new("Enter attribute tag specification", Accept::TEXT).default("*"),
Stage::ValueSpec => Prompt::new("Enter attribute value specification", Accept::TEXT).default("*"),
Stage::Select => Prompt::new("Select attributes", Accept::SELECT),
Stage::Option => {
Prompt::new("Enter an option", KW).kw(&["Value", "Position", "Height", "Angle", "Style", "Layer", "Color", "Next"]).default("N")
}
Stage::Position => Prompt::new("Enter new text insertion point", Accept::POINT),
Stage::Height => {
let p = Prompt::new("Enter new text height", Accept::POINT_OR_NUMBER);
match cur_text {
Some(t) => p.default(format!("{:.4}", t.height)),
None => p,
}
}
Stage::Angle => {
let p = Prompt::new("Enter new text rotation angle", Accept::POINT_OR_NUMBER);
match cur_text {
Some(t) => p.default(format!("{:.4}", t.rotation.to_degrees())),
None => p,
}
}
Stage::Style => {
let p = Prompt::new("Enter new text style", Accept::TEXT);
match cur_text {
Some(t) => p.default(t.style),
None => p,
}
}
Stage::Option => Prompt::new("Enter an option", KW).kw(&["Value", "Layer", "Color", "Next"]).default("N"),
Stage::ValueKind => Prompt::new("Enter type of value modification", KW).kw(&["Change", "Replace"]).default("R"),
Stage::NewValue => Prompt::new("Enter new attribute value", Accept::TEXT),
Stage::Layer => {
@@ -509,10 +446,6 @@ impl Interactive for DashAtteditM {
}
Stage::Option => match &i {
Input::Keyword(k) if k == "Value" => self.stage = Stage::ValueKind,
Input::Keyword(k) if k == "Position" => self.stage = Stage::Position,
Input::Keyword(k) if k == "Height" => self.stage = Stage::Height,
Input::Keyword(k) if k == "Angle" => self.stage = Stage::Angle,
Input::Keyword(k) if k == "Style" => self.stage = Stage::Style,
Input::Keyword(k) if k == "Layer" => self.stage = Stage::Layer,
Input::Keyword(k) if k == "Color" => self.stage = Stage::Color,
Input::Keyword(_) | Input::Enter => {
@@ -524,105 +457,14 @@ impl Interactive for DashAtteditM {
}
Input::Text(t) => {
let tl = t.trim().to_ascii_lowercase();
let opts = ["Value", "Position", "Height", "Angle", "Style", "Layer", "Color", "Next"];
match opts.iter().find(|k| !tl.is_empty() && k.to_ascii_lowercase().starts_with(&tl)) {
Some(&"Value") => self.stage = Stage::ValueKind,
Some(&"Position") => self.stage = Stage::Position,
Some(&"Height") => self.stage = Stage::Height,
Some(&"Angle") => self.stage = Stage::Angle,
Some(&"Style") => self.stage = Stage::Style,
Some(&"Layer") => self.stage = Stage::Layer,
Some(&"Color") => self.stage = Stage::Color,
Some(&"Next") => {
self.cur += 1;
if self.cur >= self.items.len() {
return Ok(Step::Done);
}
self.show_current(s);
}
_ => return Err(invalid_keyword()),
}
let later = ["Position", "Height", "Angle", "Style"];
return match later.iter().find(|k| !tl.is_empty() && k.to_ascii_lowercase().starts_with(&tl)) {
Some(k) => Err(EngineError::Other(format!("{k} is not available yet."))),
None => Err(invalid_keyword()),
};
}
_ => {}
},
Stage::Position => {
let p = match i {
Input::Point(p) => p,
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| move_text(&mut a.text, p))?;
}
self.stage = Stage::Option;
}
Stage::Height => {
let h = match &i {
Input::Point(p) => {
let cur_pt = self.items.get(self.cur).and_then(|it| current_text(s, *it)).map(|t| t.insert.xy());
match cur_pt {
Some(base) => base.dist(*p).max(1e-9),
None => p.len().max(1e-9),
}
}
Input::Text(t) if !t.trim().is_empty() => crate::units::parse_distance(t.trim())
.filter(|v| *v > 0.0)
.ok_or_else(|| EngineError::Other("Requires a positive number.".into()))?,
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.height = h;
})?;
}
self.stage = Stage::Option;
}
Stage::Angle => {
let ang = match &i {
Input::Point(p) => {
let cur_pt = self.items.get(self.cur).and_then(|it| current_text(s, *it)).map(|t| t.insert.xy());
match cur_pt {
Some(base) => base.angle_to(*p),
None => p.y.atan2(p.x),
}
}
Input::Text(t) if !t.trim().is_empty() => {
s.angle_settings().direction(t.trim()).ok_or_else(|| EngineError::Other("Requires an angle.".into()))?
}
Input::Enter => {
self.stage = Stage::Option;
return Ok(Step::Continue);
}
_ => return Ok(Step::Continue),
};
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.rotation = ang;
})?;
}
self.stage = Stage::Option;
}
Stage::Style => {
let Some(t) = text else { return Ok(Step::Continue) };
let t = t.trim();
if !t.is_empty() {
let st =
s.doc()?.text_style(t).map(|st| st.name.clone()).ok_or_else(|| EngineError::Other(format!("Cannot find style \"{t}\".")))?;
if let Some(it) = self.items.get(self.cur).copied() {
modify_attrib(s, it, |a| {
a.text.style = st;
})?;
}
}
self.stage = Stage::Option;
}
Stage::ValueKind => match &i {
Input::Keyword(k) if k == "Change" => self.stage = Stage::Find,
Input::Keyword(_) | Input::Enter => self.stage = Stage::NewValue,
+16 -246
View File
@@ -1,7 +1,6 @@
//! Layers: LAYER (programmatic sub-ids, -LAYER prompts), layer tools (LAYMCUR, LAYISO, LAYOFF, LAYFRZ…).
mod prompts;
mod state_prompts;
use cadcraft_color::Color;
use cadcraft_doc::{Layer, Lineweight};
@@ -56,9 +55,7 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("layon", "Turn All Layers On", |s, _| all_layers(s, |l| l.on = true)),
CommandSpec::new("laythw", "Thaw All Layers", |s, _| all_layers(s, |l| l.frozen = false)),
CommandSpec::new("layerp", "Previous Layer", run_layerp).menu(&["Format", "Layer Tools", "Previous Layer"]),
CommandSpec::new("layerstate.save", "Save Layer State", run_state_save)
.menu(&["Format", "Layer States Manager..."])
.params("{name, mask? (properties restoring sets: 1 on, 2 frozen, 4 locked, 8 plot, 16 new viewport freeze, 32 color, 64 linetype, 128 lineweight, 256 plot style, 1024 transparency; default all)}"),
CommandSpec::new("layerstate.save", "Save Layer State", run_state_save).menu(&["Format", "Layer States Manager..."]).params("{name}"),
CommandSpec::new("layerstate.restore", "Restore Layer State", run_state_restore).params("{name}"),
CommandSpec::new("layerstate.list", "List Layer States", run_state_list).params("{} → states").noundo(),
CommandSpec::new("layerstate.delete", "Delete Layer State", run_state_delete).params("{name}"),
@@ -403,108 +400,31 @@ fn all_layers(s: &mut Session, f: fn(&mut Layer)) -> Result<Value> {
}
fn run_state_save(s: &mut Session, p: &Value) -> Result<Value> {
use cadcraft_doc::LayerState as S;
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.save", "`name` is required"))?.to_string();
// As -LAYER stAte Save and layerstate.rename take names: none empty, over 255 characters, with a
// control character or with one AutoCAD 2024 refuses (measured for Save).
if !valid_name(&name) {
return Err(bad("layerstate.save", "invalid name"));
}
// The properties restoring sets; bit 512, which no property toggles, is always set, as AutoCAD
// 2024 saves it (measured: On alone is 513).
let mask = match p.get("mask") {
None | Some(Value::Null) => S::ALL,
Some(v) => {
let m = v.as_u64().filter(|m| m & !u64::from(S::ALL) == 0);
m.and_then(|m| u32::try_from(m).ok()).ok_or_else(|| bad("layerstate.save", "`mask` must be a sum of layer state bits (0 to 2047)"))? | 512
}
};
let d = s.doc_mut()?;
let layers = d.layers.clone();
let current = d.header.str("CLAYER", "0");
// Replace the state Restore and Delete reach (the same spelling, else another case), so a
// drawing keeps one state per name: AutoCAD 2024 finds states without regard to case. Its
// -LAYER stAte Save and layerstate-save refuse `s1` after `S1` (measured), as the command line
// here does; this command replaces, as it does a state of the same spelling. When a file holds
// both `S1` and `s1`, only the one spelled so is replaced.
if let Some(i) = state_index(d, &name) {
d.layer_states.remove(i);
}
d.layer_states.push(S { mask, ..S::new(name, layers, current) });
d.layer_states.retain(|st| st.name != name);
d.layer_states.push(cadcraft_doc::LayerState { name, layers });
ok()
}
/// The saved state called `name`: the one spelled so, else the first whose name differs only in
/// case. AutoCAD 2024 finds layer states without regard to case (measured: Restore, Edit, Name
/// and Delete of `s1` reach `S1`); case is compared as for layers and view snapshots.
pub(super) fn state_index(d: &cadcraft_doc::Drawing, name: &str) -> Option<usize> {
d.layer_states.iter().position(|st| st.name == name).or_else(|| d.layer_states.iter().position(|st| st.name.eq_ignore_ascii_case(name)))
}
fn run_state_restore(s: &mut Session, p: &Value) -> Result<Value> {
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.restore", "`name` is required"))?;
let d = s.doc_mut()?;
let st = state_index(d, name).and_then(|i| d.layer_states.get(i)).cloned().ok_or_else(|| bad("layerstate.restore", "no such layer state"))?;
restore_state(d, &st);
let st = d.layer_states.iter().find(|st| st.name == name).cloned().ok_or_else(|| bad("layerstate.restore", "no such layer state"))?;
restore_layers(d, st.layers);
ok()
}
/// Restore a saved layer state as AutoCAD 2024 does (measured): first the current layer it
/// names, when the drawing has it and the restore doesn't leave it frozen, then on each drawing
/// layer the state names (without regard to case) the properties its mask covers. The current
/// layer is never frozen; other properties (descriptions, names) stay as they are.
pub(crate) fn restore_state(d: &mut cadcraft_doc::Drawing, st: &cadcraft_doc::LayerState) {
use cadcraft_doc::LayerState as S;
// A frozen layer only thaws with Frozen in the mask and an entry of its own: without one
// AutoCAD 2024 keeps the current layer (measured).
let thaws = |l: &Layer| st.mask & S::FROZEN != 0 && st.layers.iter().any(|saved| saved.name.eq_ignore_ascii_case(&l.name));
if let Some(l) = d.layer(&st.current).filter(|l| !l.frozen || thaws(l)) {
let name = l.name.clone();
d.header.set_str("CLAYER", &name);
}
let current = d.header.str("CLAYER", "0");
let index = layer_index(d);
let has = |bit: u32| st.mask & bit != 0;
for saved in &st.layers {
let Some(l) = index.get(&saved.name.to_ascii_lowercase()).and_then(|&i| d.layers.get_mut(i)) else { continue };
if has(S::ON) {
l.on = saved.on;
}
if has(S::FROZEN) {
l.frozen = saved.frozen && !l.name.eq_ignore_ascii_case(&current);
}
if has(S::LOCKED) {
l.locked = saved.locked;
}
if has(S::PLOT) {
l.plot = saved.plot;
}
if has(S::VP_FREEZE_NEW) {
l.vp_freeze_new = saved.vp_freeze_new;
}
if has(S::COLOR) {
l.color = saved.color;
}
if has(S::LINETYPE) {
l.linetype.clone_from(&saved.linetype);
}
if has(S::LINEWEIGHT) {
l.lineweight = saved.lineweight;
}
if has(S::PLOT_STYLE) {
l.plot_style.clone_from(&saved.plot_style);
}
if has(S::TRANSPARENCY) {
l.transparency = saved.transparency;
}
}
}
/// Put the saved layers back over the drawing's layers of the same name (without regard to case);
/// saved layers the drawing no longer has are skipped. Both lists can come from a file, so the
/// drawing's layers are looked up in an index rather than scanned per saved layer.
pub(crate) fn restore_layers(d: &mut cadcraft_doc::Drawing, saved: Vec<Layer>) {
let index = layer_index(d);
let mut index: std::collections::HashMap<String, usize> = std::collections::HashMap::with_capacity(d.layers.len());
for (i, l) in d.layers.iter().enumerate() {
// The first of names that differ only in case, as `Drawing::layer_mut` finds it.
index.entry(l.name.to_ascii_lowercase()).or_insert(i);
}
for layer in saved {
if let Some(l) = index.get(&layer.name.to_ascii_lowercase()).and_then(|&i| d.layers.get_mut(i)) {
*l = layer;
@@ -512,16 +432,6 @@ pub(crate) fn restore_layers(d: &mut cadcraft_doc::Drawing, saved: Vec<Layer>) {
}
}
/// The drawing's layers by lower-case name: the first of names that differ only in case, as
/// `Drawing::layer_mut` finds it.
fn layer_index(d: &cadcraft_doc::Drawing) -> std::collections::HashMap<String, usize> {
let mut index = std::collections::HashMap::with_capacity(d.layers.len());
for (i, l) in d.layers.iter().enumerate() {
index.entry(l.name.to_ascii_lowercase()).or_insert(i);
}
index
}
fn run_state_list(s: &mut Session, _p: &Value) -> Result<Value> {
let d = s.doc()?;
let states: Vec<Value> = d.layer_states.iter().map(|st| json!({ "name": st.name, "layers": st.layers.len() })).collect();
@@ -536,8 +446,10 @@ fn run_state_list(s: &mut Session, _p: &Value) -> Result<Value> {
fn run_state_delete(s: &mut Session, p: &Value) -> Result<Value> {
let name = str_param(p, "name").ok_or_else(|| bad("layerstate.delete", "`name` is required"))?;
let d = s.doc_mut()?;
let i = state_index(d, name).ok_or_else(|| bad("layerstate.delete", "no such layer state"))?;
d.layer_states.remove(i);
if !d.layer_states.iter().any(|st| st.name == name) {
return Err(bad("layerstate.delete", "no such layer state"));
}
d.layer_states.retain(|st| st.name != name);
ok()
}
@@ -548,12 +460,10 @@ fn run_state_rename(s: &mut Session, p: &Value) -> Result<Value> {
return Err(bad("layerstate.rename", "invalid name"));
}
let d = s.doc_mut()?;
// A name in another case counts, the state's own too (AutoCAD 2024 refuses `S1` to `s1`,
// measured).
if d.layer_states.iter().any(|st| st.name.eq_ignore_ascii_case(&to)) {
if d.layer_states.iter().any(|st| st.name == to) {
return Err(bad("layerstate.rename", format!("layer state `{to}` already exists")));
}
let st = state_index(d, from).and_then(|i| d.layer_states.get_mut(i)).ok_or_else(|| bad("layerstate.rename", "no such layer state"))?;
let st = d.layer_states.iter_mut().find(|st| st.name == from).ok_or_else(|| bad("layerstate.rename", "no such layer state"))?;
st.name = to;
ok()
}
@@ -606,146 +516,6 @@ mod tests {
assert!(used.contains(&true) && used.contains(&false));
}
/// Restoring follows AutoCAD 2024 (measured with -LAYER stAte and states written into a DXF):
/// the current layer first, then only the properties the mask covers; the current layer stays
/// thawed; a current layer that is empty or gone leaves the current layer as it is.
#[test]
fn layer_state_restore_follows_the_mask_and_current_layer() {
use cadcraft_color::Color;
use cadcraft_doc::LayerState;
let mut s = Session::new();
s.execute("layer.new", &json!({ "name": "A", "color": 1, "current": true })).unwrap();
s.execute("layer.new", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "all" })).unwrap();
let saved = s.doc().unwrap().layer_states[0].clone();
assert_eq!((saved.mask, saved.current.as_str()), (LayerState::ALL, "A"));
// Only On: A's colour stays green, B comes back on (AutoCAD's S7, mask 513).
let d = s.doc_mut().unwrap();
d.layer_states.push(LayerState { name: "on".into(), mask: LayerState::ON | 512, ..saved.clone() });
s.execute("layer.set", &json!({ "name": "A", "color": 3 })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "on": false, "locked": true })).unwrap();
s.execute("layer.current", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "on" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
let (a, b) = (d.layer("A").unwrap(), d.layer("B").unwrap());
assert_eq!((a.color, b.on, b.locked), (Color::Index(3), true, true));
// Every property.
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.layer("B").unwrap().locked), (Color::Index(1), false));
// A state that freezes B with no current layer of its own (or one that is gone), restored
// with B current: B stays current and thawed; A is turned off.
for current in ["", "NOSUCH"] {
let mut frozen = s.doc().unwrap().layers.clone();
for l in &mut frozen {
l.frozen = l.name == "B";
l.on = l.name != "A";
}
s.doc_mut().unwrap().layer_states.push(LayerState::new(format!("f{current}"), frozen.clone(), current));
s.execute("layer.current", &json!({ "name": "B" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": format!("f{current}") })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B", "{current:?}");
assert!(!d.layer("B").unwrap().frozen && !d.layer("A").unwrap().on, "{current:?}");
// Naming A current, it becomes current and B freezes.
s.doc_mut().unwrap().layer_states.push(LayerState::new("fA", frozen, "A"));
s.execute("layerstate.restore", &json!({ "name": "fA" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
s.doc_mut().unwrap().layer_states.retain(|st| st.name != "fA");
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
}
// A current layer the state's mask leaves frozen doesn't become current (AutoCAD's S9: On
// only, current B; restored with A current and B frozen).
let mut on_only = s.doc().unwrap().layer_states[0].clone();
(on_only.name, on_only.mask, on_only.current) = ("S9".into(), LayerState::ON | 512, "B".into());
s.doc_mut().unwrap().layer_states.push(on_only);
s.execute("layer.current", &json!({ "name": "A" })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "frozen": true })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "S9" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
// With Frozen in the mask B is thawed and made current.
let mut thaw = s.doc().unwrap().layer_states[0].clone();
(thaw.name, thaw.current) = ("thaw".into(), "B".into());
s.doc_mut().unwrap().layer_states.push(thaw);
s.execute("layerstate.restore", &json!({ "name": "thaw" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B");
assert!(!d.layer("B").unwrap().frozen);
// Frozen in the mask, but no entry for B (a state written elsewhere): nothing would thaw
// B, so A stays current and B frozen (AutoCAD 2024, measured).
let mut no_entry = s.doc().unwrap().layer_states[0].clone();
(no_entry.name, no_entry.current) = ("no entry".into(), "B".into());
no_entry.layers.retain(|l| l.name != "B");
s.doc_mut().unwrap().layer_states.push(no_entry);
s.execute("layer.current", &json!({ "name": "A" })).unwrap();
s.execute("layer.set", &json!({ "name": "B", "frozen": true })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "no entry" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "A");
assert!(d.layer("B").unwrap().frozen);
// An entry spelled in another case is B's (layer names ignore case, as the restore of the
// properties does): B is thawed and made current.
let mut other_case = s.doc().unwrap().layer_states[0].clone();
(other_case.name, other_case.current) = ("other case".into(), "B".into());
for l in other_case.layers.iter_mut().filter(|l| l.name == "B") {
l.name = "b".into();
}
s.doc_mut().unwrap().layer_states.push(other_case);
s.execute("layerstate.restore", &json!({ "name": "other case" })).unwrap();
let d = s.doc().unwrap();
assert_eq!(d.header.str("CLAYER", ""), "B");
assert!(!d.layer("B").unwrap().frozen);
// What a state doesn't hold stays: the description.
s.execute("layer.set", &json!({ "name": "A", "description": "kept" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "all" })).unwrap();
assert_eq!(s.doc().unwrap().layer("A").unwrap().description, "kept");
}
/// Plotting, freezing in new viewports, linetype, lineweight, plot style and transparency each
/// come back under their own mask bit only: a state of one bit restores that property and
/// leaves the other five as they are.
#[test]
fn layer_state_restores_each_property_under_its_own_bit_only() {
use cadcraft_doc::{Drawing, LayerState as S, Lineweight};
let mut s = Session::new();
s.execute("layer.new", &json!({ "name": "A" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "all" })).unwrap();
let saved = s.doc().unwrap().layer_states[0].clone();
let props = |d: &Drawing| {
let l = d.layer("A").unwrap();
(l.plot, l.vp_freeze_new, l.linetype.clone(), l.lineweight, l.plot_style.clone(), l.transparency)
};
let change = |d: &mut Drawing| {
let l = d.layer_mut("A").unwrap();
(l.plot, l.vp_freeze_new, l.linetype, l.lineweight, l.plot_style, l.transparency) =
(false, true, "DASHED".into(), Lineweight::from_dxf(50), "Thick".into(), 40);
};
let before = props(s.doc().unwrap());
change(s.doc_mut().unwrap());
let after = props(s.doc().unwrap());
for bit in [S::PLOT, S::VP_FREEZE_NEW, S::LINETYPE, S::LINEWEIGHT, S::PLOT_STYLE, S::TRANSPARENCY] {
let name = format!("b{bit}");
s.doc_mut().unwrap().layer_states.push(S { name: name.clone(), mask: bit | 512, ..saved.clone() });
change(s.doc_mut().unwrap());
s.execute("layerstate.restore", &json!({ "name": name })).unwrap();
let mut want = after.clone();
match bit {
S::PLOT => want.0 = before.0,
S::VP_FREEZE_NEW => want.1 = before.1,
S::LINETYPE => want.2.clone_from(&before.2),
S::LINEWEIGHT => want.3 = before.3,
S::PLOT_STYLE => want.4.clone_from(&before.4),
_ => want.5 = before.5,
}
assert_eq!(props(s.doc().unwrap()), want, "mask {bit}");
}
}
#[test]
fn rejected_layer_set_changes_nothing() {
let mut s = Session::new();
+7 -20
View File
@@ -8,7 +8,6 @@ use serde_json::{Value, json};
use super::super::find_command;
use super::super::qselect::wildcard;
use super::state_prompts;
use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
const OPTIONS: &[&str] = &[
@@ -35,9 +34,9 @@ const OPTIONS: &[&str] = &[
];
/// Keyword-only: spaces separate inputs.
pub(super) const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
/// A name or value: Space ends the input, as it does in AutoCAD scripts.
pub(super) const NAME: Accept = Accept { number: true, ..Accept::TEXT };
const NAME: Accept = Accept { number: true, ..Accept::TEXT };
/// A per-layer change applied to a list of layer names.
#[derive(Clone, Debug)]
@@ -112,8 +111,6 @@ enum Stage {
Layers(Change),
/// Turning the current layer off asks first.
ConfirmOff(Vec<String>),
/// stAte and its options.
State(state_prompts::Stage),
}
#[derive(Default)]
@@ -126,19 +123,19 @@ fn current_layer(s: &Session) -> String {
}
/// Run a layer command's body directly: the running command records the single undo step.
pub(super) fn call(s: &mut Session, id: &str, p: &Value) -> Result<Value> {
fn call(s: &mut Session, id: &str, p: &Value) -> Result<Value> {
let spec = find_command(id).ok_or_else(|| EngineError::UnknownCommand(id.into()))?;
(spec.run)(s, p)
}
pub(super) fn message(e: &EngineError) -> String {
fn message(e: &EngineError) -> String {
match e {
EngineError::BadParams { msg, .. } => msg.clone(),
other => other.to_string(),
}
}
pub(super) fn retry(msg: impl Into<String>) -> EngineError {
fn retry(msg: impl Into<String>) -> EngineError {
EngineError::Other(msg.into())
}
@@ -191,9 +188,8 @@ impl LayerM {
"LOck" => Stage::Layers(Change::Lock),
"Unlock" => Stage::Layers(Change::Unlock),
"Description" => Stage::Description,
"stAte" => Stage::State(state_prompts::Stage::Option),
other => {
// MATerial, rEconcile: report and stay at the option prompt.
// MATerial, stAte, rEconcile: report and stay at the option prompt.
s.echo(format!("-LAYER {other} is not available yet."));
Stage::Option
}
@@ -266,7 +262,7 @@ impl LayerM {
Ok(Step::Continue)
};
match stage {
Stage::Option | Stage::State(_) => Ok(Step::Continue),
Stage::Option => Ok(Step::Continue),
Stage::List => {
self.list(s, text.as_deref().unwrap_or("*"));
Ok(Step::Continue)
@@ -438,18 +434,9 @@ impl Interactive for LayerM {
if enter_is_current { p.default(cur) } else { p }
}
Stage::ConfirmOff(_) => Prompt::new(format!("Really want layer \"{cur}\" (the CURRENT layer) off?"), KW).kw(&["Yes", "No"]).default("N"),
Stage::State(st) => st.prompt(),
}
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
if let Stage::State(st) = &mut self.stage
&& !matches!(i, Input::Cancel)
{
if !st.input(s, &i)? {
self.stage = Stage::Option;
}
return Ok(Step::Continue);
}
match (&self.stage, &i) {
(_, Input::Cancel) => Ok(Step::Cancel),
(Stage::Option, Input::Enter) => Ok(Step::Done),
@@ -1,256 +0,0 @@
//! -LAYER stAte: save, restore, edit, rename, delete and list the drawing's layer states, with
//! AutoCAD 2024's prompts and messages (measured). Save, Restore, Name and Delete run the
//! `layerstate.*` commands; Edit changes the state's mask in place.
use cadcraft_doc::LayerState as LS;
use serde_json::{Value, json};
use super::prompts::{KW, NAME, call, message, retry};
use super::{state_index, valid_name};
use crate::{Input, Prompt, Result, Session};
/// The options after stAte. Import and EXport (layer state files) are not available yet.
const OPTIONS: &[&str] = &["?", "Save", "Restore", "Edit", "Name", "Delete", "Import", "EXport"];
/// "Enter states to change": each keyword, the name AutoCAD 2024 lists it by and its mask bit, in
/// AutoCAD's order.
const TOGGLES: [(&str, &str, u32); 10] = [
("On", "On", LS::ON),
("Frozen", "Frozen", LS::FROZEN),
("Lock", "Lock", LS::LOCKED),
("Plot", "Plot", LS::PLOT),
("Newvpfreeze", "Newvpfreeze", LS::VP_FREEZE_NEW),
("Color", "Color", LS::COLOR),
("lineType", "lineType", LS::LINETYPE),
("lineWeight", "lineWeight", LS::LINEWEIGHT),
("TRansparency", "Transparency", LS::TRANSPARENCY),
("plotStyle", "plotStyle", LS::PLOT_STYLE),
];
/// The options that ask for a saved state's name.
#[derive(Clone, Copy, Debug)]
pub(super) enum Pick {
Restore,
Edit,
Name,
Delete,
}
impl Pick {
fn verb(self) -> &'static str {
match self {
Pick::Restore => "restore",
Pick::Edit => "edit",
Pick::Name => "rename",
Pick::Delete => "delete",
}
}
}
#[derive(Clone, Debug, Default)]
pub(super) enum Stage {
#[default]
Option,
/// Save: the new state's name.
SaveName,
/// Restore, Edit, Name or Delete: the saved state's name.
Pick(Pick),
/// Name: the new name of the state called so.
RenameTo(String),
/// "Enter states to change" for the state `name`: one Save makes on Enter, or one Edit
/// changes (`edit`).
Toggles { name: String, mask: u32, edit: bool },
}
impl Stage {
pub(super) fn prompt(&self) -> Prompt {
match self {
Stage::Option => Prompt::new("Enter an option", KW).kw(OPTIONS),
Stage::SaveName | Stage::RenameTo(_) => Prompt::new("Enter new layer state name", NAME),
Stage::Pick(p) => Prompt::new(format!("Enter name of layer state to {}", p.verb()), NAME).kw(&["?"]),
Stage::Toggles { .. } => Prompt::new("Enter states to change", KW).kw(&TOGGLES.map(|t| t.0)),
}
}
/// One input. `Ok(false)`: back to -LAYER's options. An invalid input leaves the stage as it
/// is, so the prompt is asked again.
pub(super) fn input(&mut self, s: &mut Session, i: &Input) -> Result<bool> {
let text = match i {
Input::Text(t) | Input::Keyword(t) => Some(t.trim().to_string()).filter(|t| !t.is_empty()),
_ => None,
};
let next = match std::mem::take(self) {
Stage::Option => match i {
Input::Enter => return Ok(false),
Input::Keyword(k) => option(s, k),
_ => return Err(retry("Invalid option keyword.")),
},
Stage::SaveName => match text {
None => Stage::Option,
Some(n) => save_name(s, n),
},
Stage::Pick(p) => match (i, text) {
(Input::Keyword(k), _) if k == "?" => {
list(s);
Stage::Pick(p)
}
(_, None) => Stage::Option,
(_, Some(n)) => pick(s, p, &n),
},
Stage::RenameTo(from) => {
if let Some(to) = text {
rename(s, &from, &to);
}
Stage::Option
}
Stage::Toggles { name, mut mask, edit } => match i {
Input::Keyword(k) => {
if let Some(&(_, _, bit)) = TOGGLES.iter().find(|t| t.0 == k) {
mask ^= bit;
}
show(s, mask);
Stage::Toggles { name, mask, edit }
}
Input::Enter => {
finish(s, &name, mask, edit);
Stage::Option
}
_ => {
*self = Stage::Toggles { name, mask, edit };
return Err(retry("Invalid option keyword."));
}
},
};
*self = next;
Ok(true)
}
}
fn option(s: &mut Session, k: &str) -> Stage {
match k {
"?" => {
list(s);
Stage::Option
}
"Save" => Stage::SaveName,
"Restore" => Stage::Pick(Pick::Restore),
"Edit" => Stage::Pick(Pick::Edit),
"Name" => Stage::Pick(Pick::Name),
"Delete" => Stage::Pick(Pick::Delete),
other => {
s.echo(format!("-LAYER stAte {other} is not available yet."));
Stage::Option
}
}
}
/// Whether a saved state has the name `n` in any case.
fn taken(s: &Session, n: &str) -> bool {
s.doc().is_ok_and(|d| d.layer_states.iter().any(|st| st.name.eq_ignore_ascii_case(n)))
}
/// Save's name: refused (asked again) when it has a character AutoCAD 2024 refuses (the layer
/// name ones, measured one by one), is longer than 255 characters (measured 256), or is a saved
/// state's name in any case (measured `s1` after `S1`).
fn save_name(s: &mut Session, n: String) -> Stage {
if !valid_name(&n) {
s.echo(format!("\"{n}\" is an invalid layer state name."));
return Stage::SaveName;
}
if taken(s, &n) {
s.echo(format!("Layer state \"{n}\" already exists."));
return Stage::SaveName;
}
let mask = s.settings.layer_state_mask;
show(s, mask);
Stage::Toggles { name: n, mask, edit: false }
}
fn pick(s: &mut Session, p: Pick, n: &str) -> Stage {
let found = s.doc().ok().and_then(|d| state_index(d, n).and_then(|i| d.layer_states.get(i)).map(|st| (st.name.clone(), st.mask)));
let Some((name, mask)) = found else {
s.echo("Unknown layer state name.");
return Stage::Pick(p);
};
match p {
Pick::Restore => {
run(s, "layerstate.restore", &json!({ "name": name }));
Stage::Option
}
Pick::Delete => {
run(s, "layerstate.delete", &json!({ "name": name }));
Stage::Option
}
Pick::Edit => {
show(s, mask);
Stage::Toggles { name, mask, edit: true }
}
Pick::Name => Stage::RenameTo(name),
}
}
/// Name's new name. A name some state has in any case, the state's own too, is refused with
/// AutoCAD 2024's two lines (measured `S2` onto `S2`, `S1` onto `s1`). A name with a character
/// AutoCAD refuses leaves the state as it is with no message, as AutoCAD does (measured `a,b`,
/// `a<b`); AutoCAD renames to a name starting with "*" as an anonymous `*A1`, and CADCraft leaves
/// that state as it is too.
fn rename(s: &mut Session, from: &str, to: &str) {
if taken(s, to) {
s.echo("Layer state could not be renamed.");
s.echo(format!("{to} already exists."));
} else if valid_name(to) {
run(s, "layerstate.rename", &json!({ "from": from, "to": to }));
}
}
/// Enter at "Enter states to change": Save makes the state with this mask and keeps the toggles
/// for the next Save; Edit sets the state's mask and keeps the bits no toggle reaches (AutoCAD's
/// 65536 after a restore). Edit leaves the next Save's toggles alone (measured).
fn finish(s: &mut Session, name: &str, mask: u32, edit: bool) {
if !edit {
if run(s, "layerstate.save", &json!({ "name": name, "mask": mask & LS::ALL })) {
s.settings.layer_state_mask = mask & LS::ALL;
}
return;
}
// Only a changed mask touches the drawing.
let Ok(d) = s.doc() else { return };
let Some(i) = state_index(d, name).filter(|&i| d.layer_states.get(i).is_some_and(|st| st.mask != mask)) else { return };
if let Ok(d) = s.doc_mut()
&& let Some(st) = d.layer_states.get_mut(i)
{
st.mask = mask;
}
}
/// Run a `layerstate.*` command, reporting a refusal; `true` when it ran.
fn run(s: &mut Session, id: &str, p: &Value) -> bool {
match call(s, id, p) {
Ok(_) => true,
Err(e) => {
s.echo(message(&e));
false
}
}
}
/// The toggles as AutoCAD 2024 lists them before "Enter states to change".
fn show(s: &mut Session, mask: u32) {
s.echo("States");
for (_, label, bit) in TOGGLES {
s.echo(format!("{label:<20}{}", if mask & bit != 0 { "Yes" } else { "No" }));
}
}
/// `?`: every saved state by name without regard to case, as AutoCAD 2024 lists them (measured:
/// `S2`, `b`, `S1` saved in that order list as `b`, `S1`, `S2`; a name starting with "*", its
/// `*A1`, is listed too).
fn list(s: &mut Session) {
let mut names: Vec<String> = s.doc().map(|d| d.layer_states.iter().map(|st| st.name.clone()).collect()).unwrap_or_default();
names.sort_by_cached_key(|n| n.to_ascii_lowercase());
s.echo("Layer state");
s.echo("-".repeat(29));
for n in names {
s.echo(n);
}
}
+4 -1
View File
@@ -323,13 +323,16 @@ impl Interactive for StretchM {
s.echo("Select objects to stretch by crossing-window or crossing-polygon...");
Ok(Step::Continue)
}
/// Returns the active interactive prompt for the current `STRETCH` phase.
fn prompt(&self, _s: &Session) -> Prompt {
if let (StretchPhase::Select, Some(m)) = (self.phase, &self.mode) {
return m.prompt();
}
match (self.phase, self.corner) {
(StretchPhase::Select, Some(c)) => Prompt::new("Specify opposite corner", Accept::POINT).corner(c),
(StretchPhase::Select, None) => Prompt::new(if self.removing { "Remove objects" } else { "Select objects" }, Accept::POINT),
(StretchPhase::Select, None) => {
Prompt { picks_one: self.removing, ..Prompt::new(if self.removing { "Remove objects" } else { "Select objects" }, Accept::POINT) }
}
(StretchPhase::Base, _) => Prompt::new("Specify base point", Accept::POINT).kw(&["Displacement"]).default("Displacement"),
(StretchPhase::Displacement, _) => Prompt::new("Specify displacement", Accept::POINT).default("0,0"),
(StretchPhase::Second, _) => Prompt::new("Specify second point or <use first point as displacement>", Accept::POINT).base_opt(self.base),
+2 -2
View File
@@ -101,7 +101,7 @@ pub fn specs() -> Vec<CommandSpec> {
CommandSpec::new("rename", "Rename...", run_rename)
.menu(&["Format", "Rename..."])
.alias(&["ren", "-rename"])
.params("{table: layer|linetype|style|dimstyle|block|mleaderstyle|tablestyle|view|ucs|vport, from, to}")
.params("{table: layer|linetype|style|dimstyle|block|mleaderstyle|tablestyle|view|ucs, from, to}")
.interactive(|_| Ok(Box::new(rename::RenameM::default()))),
]
}
@@ -995,7 +995,7 @@ fn run_rename(s: &mut Session, p: &Value) -> Result<Value> {
}
"block" => rename::block(s, &from, &to)?,
"mleaderstyle" | "multileaderstyle" => rename::simple(s, "mleaderstyle", &from, &to)?,
"tablestyle" | "view" | "ucs" | "vport" => rename::simple(s, &table, &from, &to)?,
"tablestyle" | "view" | "ucs" => rename::simple(s, &table, &from, &to)?,
"style" | "textstyle" => {
run_style_rename(s, &json!({ "from": from, "to": to }))?;
}
+16 -81
View File
@@ -93,8 +93,6 @@ pub(super) fn simple(s: &mut Session, table: &str, from: &str, to: &str) -> Resu
"tablestyle" => d.table_styles.iter_mut().map(|t| &mut t.name).collect(),
"view" => d.views.iter_mut().map(|t| &mut t.name).collect(),
"ucs" => d.ucss.iter_mut().map(|t| &mut t.name).collect(),
// A saved viewport configuration, every tile of it; never the one shown (`*Active`).
"vport" => d.vports.iter_mut().filter(|v| !v.is_active()).map(|t| &mut t.name).collect(),
_ => return Err(bad("rename", "unsupported table")),
};
if !to.eq_ignore_ascii_case(from) && names.iter().any(|n| n.eq_ignore_ascii_case(&to)) {
@@ -136,47 +134,35 @@ const TYPES: &[(&str, Option<&str>, &str)] = &[
("Plotstyle", None, "plot style"),
("textStyle", Some("style"), "text style"),
("Tablestyle", Some("tablestyle"), "table style"),
("Ucs", Some("ucs"), "ucs"),
("Ucs", Some("ucs"), "UCS"),
("VIew", Some("view"), "view"),
("VPort", Some("vport"), "viewport configuration"),
("VPort", None, "viewport configuration"),
];
/// The noun in "Cannot find …" and "Invalid … name.": AutoCAD 2024 writes "UCS" there, "ucs" in
/// its prompts and in "A ucs named … already exists." (measured).
fn title(noun: &str) -> &str {
if noun == "ucs" { "UCS" } else { noun }
}
/// Keyword-only: spaces separate inputs.
const KW: Accept = Accept { point: false, number: false, text: false, select: false, enter: true };
/// A name: Space ends the input.
const NAME: Accept = Accept { number: true, ..Accept::TEXT };
fn any_named<'a>(mut names: impl Iterator<Item = &'a String>, name: &str) -> Option<String> {
names.find(|n| n.eq_ignore_ascii_case(name)).cloned()
fn any_named<'a>(mut names: impl Iterator<Item = &'a String>, name: &str) -> bool {
names.any(|n| n.eq_ignore_ascii_case(name))
}
/// The name as the drawing spells it of the `table` entry named `name` (without regard to case).
fn stored(d: &Drawing, table: &str, name: &str) -> Option<String> {
fn exists(d: &Drawing, table: &str, name: &str) -> bool {
match table {
"block" => d.block(name).map(|t| t.name.clone()),
"layer" => d.layer(name).map(|t| t.name.clone()),
"linetype" => d.linetype(name).map(|t| t.name.clone()),
"style" => d.text_style(name).map(|t| t.name.clone()),
"dimstyle" => d.dim_style(name).map(|t| t.name.clone()),
"block" => d.block(name).is_some(),
"layer" => d.layer(name).is_some(),
"linetype" => d.linetype(name).is_some(),
"style" => d.text_style(name).is_some(),
"dimstyle" => d.dim_style(name).is_some(),
"mleaderstyle" => any_named(d.mleader_styles.iter().map(|t| &t.name), name),
"tablestyle" => any_named(d.table_styles.iter().map(|t| &t.name), name),
"view" => any_named(d.views.iter().map(|t| &t.name), name),
"ucs" => any_named(d.ucss.iter().map(|t| &t.name), name),
"vport" => any_named(d.vports.iter().filter(|v| !v.is_active()).map(|t| &t.name), name),
_ => Some(name.to_string()),
_ => true,
}
}
fn exists(d: &Drawing, table: &str, name: &str) -> bool {
stored(d, table, name).is_some()
}
#[derive(Default)]
enum Stage {
#[default]
@@ -213,15 +199,6 @@ impl Interactive for RenameM {
}
}
fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
// No new name is an invalid one (AutoCAD 2024, measured for layers, blocks, views and
// viewport configurations).
if i == Input::Enter
&& let Stage::New(t, _) = &self.stage
&& let Some((_, Some(_), noun)) = TYPES.get(*t)
{
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
}
if matches!(i, Input::Cancel | Input::Enter) {
return Ok(if i == Input::Cancel { Step::Cancel } else { Step::Done });
}
@@ -240,41 +217,12 @@ impl Interactive for RenameM {
self.stage = Stage::Old(t);
return Ok(Step::Continue);
};
// AutoCAD 2024 ends -RENAME on an old name it won't rename (measured): "Invalid … name."
// for a viewport configuration or block whose name starts with "*" (*Active,
// *Model_Space, an anonymous block's *U0) and for linetypes ByLayer and ByBlock;
// "Cannot rename …" and "*Invalid*" for layer 0 and linetype Continuous.
let invalid = match *table {
Some("vport" | "block") => name.starts_with('*'),
Some("linetype") => name.eq_ignore_ascii_case("bylayer") || name.eq_ignore_ascii_case("byblock"),
_ => false,
};
if invalid {
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
if let Some(table) = table
&& !exists(s.doc()?, table, &name)
{
self.stage = Stage::Old(t);
return Err(EngineError::Other(format!("No {noun} named \"{name}\".")));
}
let fixed = match *table {
Some("layer") => name == "0",
Some("linetype") => name.eq_ignore_ascii_case("continuous"),
_ => false,
};
if fixed {
s.echo(format!("Cannot rename {} \"{name}\".", title(noun)));
s.echo("*Invalid*");
return Ok(Step::Done);
}
// The old name as the drawing spells it: a new name in another case than that is a
// rename, even when it is the old name as typed (AutoCAD 2024, measured).
let name = match table {
Some(table) => match stored(s.doc()?, table, &name) {
Some(n) => n,
None => {
s.echo(format!("Cannot find {} \"{name}\".", title(noun)));
return Ok(Step::Done);
}
},
None => name,
};
self.stage = Stage::New(t, name);
Ok(Step::Continue)
}
@@ -287,19 +235,6 @@ impl Interactive for RenameM {
s.echo(format!("Renaming a {noun} is not available yet."));
return Ok(Step::Done);
};
// AutoCAD 2024's messages, each ending the command (measured).
if !valid_name(&name) {
s.echo(format!("Invalid {} name.", title(noun)));
return Ok(Step::Done);
}
if !name.eq_ignore_ascii_case(&old) && exists(s.doc()?, table, &name) {
s.echo(format!("A {noun} named \"{name}\" already exists."));
s.echo("*Invalid*");
return Ok(Step::Done);
}
if name == old {
return Ok(Step::Done);
}
match super::run_rename(s, &json!({ "table": table, "from": old, "to": name })) {
Ok(_) => Ok(Step::Done),
Err(e) => {
+4 -3
View File
@@ -8,6 +8,7 @@ use cadcraft_doc::{Drawing, EntityKind, Handle};
use cadcraft_geom::{Bounds2, Line, Vec2, line_line};
use serde_json::{Value, json};
use super::curves::KW;
use super::helpers::{line, lwpoly, rect_vertices};
use super::modify::{Edges, extend, trim};
use super::{bad, point_param, points_param};
@@ -360,7 +361,7 @@ impl Interactive for TrimM {
Stage::Crossing(Some(_)) => Prompt::new("Specify opposite corner", Accept::POINT),
Stage::Mode => {
let msg = if self.extend { "Enter an extend mode option" } else { "Enter a trim mode option" };
Prompt::new(msg, Accept::TEXT).kw(&["Quick", "Standard"]).default(if quick_mode(s) { "Quick" } else { "Standard" })
Prompt::new(msg, KW).kw(&["Quick", "Standard"]).default(if quick_mode(s) { "Quick" } else { "Standard" })
}
Stage::Project => {
let cur = match proj_mode(s) {
@@ -368,9 +369,9 @@ impl Interactive for TrimM {
2 => "View",
_ => "Ucs",
};
Prompt::new("Enter a projection option", Accept::TEXT).kw(&["None", "Ucs", "View"]).default(cur)
Prompt::new("Enter a projection option", KW).kw(&["None", "Ucs", "View"]).default(cur)
}
Stage::Edge => Prompt::new("Enter an implied edge extension mode", Accept::TEXT).kw(&["Extend", "No extend"]).default(if edge_mode(s) {
Stage::Edge => Prompt::new("Enter an implied edge extension mode", KW).kw(&["Extend", "No extend"]).default(if edge_mode(s) {
"Extend"
} else {
"No extend"
+1 -1
View File
@@ -138,7 +138,7 @@ fn save(s: &mut Session, name: &str, window: Option<Bounds2>, snapshot: bool) ->
let layer_state = snapshot.then(|| {
let state = snapshot_name(name);
d.layer_states.retain(|l| !l.name.eq_ignore_ascii_case(&state));
d.layer_states.push(LayerState::new(state.clone(), d.layers.clone(), ""));
d.layer_states.push(LayerState { name: state.clone(), layers: d.layers.clone() });
state
});
if let Some(old) = &replaced {
+1 -2
View File
@@ -31,7 +31,7 @@ impl Accept {
/// [Truecolor/COlorbook] <BYLAYER>:". A prompt asking for something else besides its keywords has
/// it: "Enter block name or [?]:", "Specify insertion base point or [Basepoint/…]:". Read from
/// AutoCAD's command line over measured runs, where no prompt was written both ways.
const NO_OR: &[&str] = &[
const NO_OR: [&str; 28] = [
"Bring to front",
"Calculate rectangle dimensions based on",
"Choose mode for selected object conversion",
@@ -50,7 +50,6 @@ const NO_OR: &[&str] = &[
"Enter option",
"Enter polyline linetype generation option",
"Enter property to change",
"Enter states to change",
"Enter the type of array",
"Enter type of unused objects to purge",
"Enter viewport arrangement",
-5
View File
@@ -27,10 +27,6 @@ pub struct Settings {
pub measureinit: bool,
/// -VIEW sEttings > Layer snapshot: named views save the layer settings with them.
pub view_layer_snapshot: bool,
/// -LAYER stAte Save: the properties a new layer state restores (its mask), as the last Save
/// left them. AutoCAD 2024 keeps these toggles in the registry from one Save to the next
/// (measured); Edit doesn't change them.
pub layer_state_mask: u32,
pub dynmode: bool,
/// DYNDIGRIP: which dimensions grip dimensional input shows while a grip is stretched (bits:
/// 1 resulting length, 2 length change, 4 absolute angle, 8 angle change, 16 radius); read
@@ -152,7 +148,6 @@ impl Default for Settings {
zoomfactor: 60,
measureinit: false,
view_layer_snapshot: true,
layer_state_mask: cadcraft_doc::LayerState::ALL,
dynmode: true,
dyndigrip: 31,
dyndivis: 1,
-202
View File
@@ -1,202 +0,0 @@
//! The Key point option of a base point: ARRAYRECT, ARRAYPOLAR and ARRAYEDIT (Base point and
//! REPlace) take the source objects' key point (an end point, midpoint, centre…) nearest the
//! picked point as the base point; the JSON forms take `keyPoint`.
use cadcraft_engine::Session;
use cadcraft_engine::doc::{ArrayKind, ArrayParams, EntityKind, Handle};
use cadcraft_engine::geom::Vec2;
use serde_json::json;
fn source_line(s: &mut Session) -> String {
let r = s.execute("line", &json!({"points": [[0, 0], [2, 1]]})).unwrap();
r["handle"].as_str().or_else(|| r["handles"][0].as_str()).unwrap().to_string()
}
fn handle(v: &serde_json::Value) -> Handle {
Handle::parse_hex(v["handle"].as_str().unwrap()).unwrap()
}
/// The array's insertion point (its base point) and parameters.
fn array(s: &Session, h: Handle) -> (Vec2, ArrayParams) {
let d = s.doc().unwrap();
let e = d.entity(h).unwrap();
let EntityKind::Insert(i) = &e.kind else { panic!("not an array") };
(i.insert.xy(), d.array_params(e).unwrap())
}
fn only_array(s: &Session) -> Handle {
let d = s.doc().unwrap();
let arrays: Vec<Handle> = d.model.iter().filter(|e| d.array_params(e).is_some()).map(|e| e.handle).collect();
assert_eq!(arrays.len(), 1);
arrays[0]
}
fn typed(s: &mut Session, inputs: &[&str]) {
for t in inputs {
s.cmdline(t).unwrap();
}
}
#[test]
fn arrayrect_and_arraypolar_take_a_key_point_as_the_base_point() {
let mut s = Session::new();
let l = source_line(&mut s);
let r = s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "keyPoint": [1.9, 1.05]})).unwrap();
assert!(array(&s, handle(&r)).0.near(Vec2::new(2.0, 1.0), 1e-9));
let mut s = Session::new();
let l = source_line(&mut s);
let r = s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 4, "keyPoint": [1.1, 0.4]})).unwrap();
assert!(array(&s, handle(&r)).0.near(Vec2::new(1.0, 0.5), 1e-9), "the line's midpoint");
}
#[test]
fn typed_key_points_at_arrayrect_and_arraypolar() {
let mut s = Session::new();
source_line(&mut s);
typed(&mut s, &["arrayrect", "l", "", "b", "k", "1.9,0.95", "x"]);
assert!(array(&s, only_array(&s)).0.near(Vec2::new(2.0, 1.0), 1e-9));
// Enter at the key point prompt goes back to the base point prompt.
let mut s = Session::new();
source_line(&mut s);
typed(&mut s, &["arraypolar", "l", "", "b", "k"]);
assert!(s.current_prompt().unwrap().message.contains("key point"));
typed(&mut s, &[""]);
assert!(s.current_prompt().unwrap().message.contains("base point"));
typed(&mut s, &["k", "0.1,0.1", "-10,0", "x"]);
assert!(array(&s, only_array(&s)).0.near(Vec2::new(0.0, 0.0), 1e-9));
}
#[test]
fn arrayedit_moves_the_base_point_to_a_key_point_of_an_item() {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
// Near the start of the third item: the base point goes to (10, 0), the items stay.
s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [10.2, 0.05]})).unwrap();
let (at, p) = array(&s, h);
assert!(at.near(Vec2::new(10.0, 0.0), 1e-9), "{at:?}");
assert!(matches!(p.kind, ArrayKind::Rect(r) if r.cols == 3 && r.col_spacing == 5.0));
let items = s.execute("explode", &json!({"handles": [h.hex()]})).unwrap();
assert!(items.to_string().len() > 2);
let d = s.doc().unwrap();
let mut starts: Vec<(i64, i64)> = d
.model
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Line(l) => Some(((l.a.x * 10.0).round() as i64, (l.a.y * 10.0).round() as i64)),
_ => None,
})
.collect();
starts.sort();
assert_eq!(starts, [(0, 0), (50, 0), (100, 0)]);
// Not on an item: refused.
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [3.5, 40]})).is_err());
assert!(array(&s, h).0.near(Vec2::ZERO, 1e-9));
// Typed: Base point, Key point, a point on the second item near its end.
s.set_selection(vec![h]);
typed(&mut s, &["arrayedit", "b", "k", "6.9,0.9", "x"]);
assert!(array(&s, h).0.near(Vec2::new(7.0, 1.0), 1e-9));
}
#[test]
fn replacement_objects_take_a_key_point_as_their_base_point() {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 3, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
let c = s.execute("circle", &json!({"center": [50, 50], "radius": 1})).unwrap()["handle"].clone();
// The circle's right quadrant is the base point: on item 1 (at x = 5) its centre is at x = 4.
s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [c], "keyPoint": [51.2, 50.1], "items": [[1, 0, 0]]}})).unwrap();
s.execute("explode", &json!({"handles": [h.hex()]})).unwrap();
let d = s.doc().unwrap();
// The replaced item stays a reference to the replacement block.
let centres: Vec<Vec2> = d
.model
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Insert(i) => d.block(&i.block).map(|b| (i.transform(b.base.xy()), b)),
_ => None,
})
.flat_map(|(m, b)| {
b.entities
.iter()
.filter_map(move |e| match &e.kind {
EntityKind::Circle(c) => Some(m.apply(c.center.xy())),
_ => None,
})
.collect::<Vec<_>>()
})
.collect();
assert!(centres.iter().any(|c| c.near(Vec2::new(4.0, 0.0), 1e-9)), "{centres:?}");
}
#[test]
fn hostile_key_points_never_panic() {
let mut s = Session::new();
let l = source_line(&mut s);
for kp in [json!(["a", 1]), json!([1e308, -1e308]), json!([]), json!("x"), json!(null)] {
let _ = s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "keyPoint": kp}));
let _ = s.execute("arraypolar", &json!({"handles": [l], "center": [5, 5], "count": 3, "keyPoint": kp}));
}
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
for kp in [json!([1e308, 1e308]), json!([-1e308, 0]), json!(["x"]), json!([0.5, 0.25])] {
let _ = s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": kp}));
let _ = s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [], "keyPoint": kp, "items": [[0, 0, 0]]}}));
}
// Typed key points far away or on nothing are refused without leaving the command broken.
s.set_selection(vec![h]);
typed(&mut s, &["arrayedit", "b", "k"]);
assert!(s.cmdline("1e300,1e300").is_err() || s.running.is_some());
s.cancel();
}
/// A `keyPoint` that is there but isn't a point is refused, not taken as no key point (which
/// would make the array at another base point).
#[test]
fn a_key_point_that_is_not_a_point_is_refused() {
let mut s = Session::new();
let l = source_line(&mut s);
assert!(s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "keyPoint": ["bad", 1]})).is_err());
assert!(s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 3, "keyPoint": "x"})).is_err());
assert!(s.doc().unwrap().model.iter().all(|e| s.doc().unwrap().array_params(e).is_none()), "no array made");
let h = handle(&s.execute("arrayrect", &json!({"handles": [l], "cols": 2, "rows": 1, "colSpacing": 5, "base": [0, 0]})).unwrap());
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "keyPoint": [1]})).is_err());
let c = s.execute("circle", &json!({"center": [50, 50], "radius": 1})).unwrap()["handle"].clone();
assert!(s.execute("arrayedit", &json!({"handle": h.hex(), "replace": {"handles": [c], "keyPoint": {}, "items": [[1, 0, 0]]}})).is_err());
}
/// More objects than the key point search takes are refused rather than searched in part, which
/// could miss the nearest key point.
#[test]
fn a_key_point_of_too_many_objects_is_refused() {
let mut s = Session::new();
// 10,001 lines; the last one ends nearest the key point.
let pts: Vec<[f64; 2]> = (0..10_002).map(|i| [f64::from(i), 0.0]).collect();
let r = s.execute("line", &json!({ "points": pts })).unwrap();
let hs: Vec<String> = s.doc().unwrap().model.iter().map(|e| e.handle.hex()).collect();
assert_eq!(hs.len(), 10_001, "{r}");
let e = s.execute("arraypolar", &json!({"handles": hs, "center": [0, -50], "count": 2, "keyPoint": [10_001.2, 0]})).unwrap_err();
assert!(e.to_string().contains("10000"), "{e}");
}
/// ARRAYEDIT with a new base point (`base` or `keyPoint`) and a polar `center` in one call puts the
/// centre where asked: the base point moves the array's insertion point, so the centre is read in
/// the array's placement after that move.
#[test]
fn arrayedit_center_with_a_new_base_point_lands_where_asked() {
for (key, at) in [("base", json!([2, 1])), ("keyPoint", json!([1.95, 0.99]))] {
let mut s = Session::new();
let l = source_line(&mut s);
let h = handle(&s.execute("arraypolar", &json!({"handles": [l], "center": [-10, 0], "count": 4, "base": [0, 0]})).unwrap());
s.execute("arrayedit", &json!({"handle": h.hex(), key: at, "center": [5, 0]})).unwrap();
let (ins, p) = array(&s, h);
let ArrayKind::Polar(k) = p.kind else { panic!("not polar") };
assert!(ins.near(Vec2::new(2.0, 1.0), 1e-9), "{key}: {ins:?}");
// The centre is kept relative to the insertion point.
assert!((ins + k.center).near(Vec2::new(5.0, 0.0), 1e-9), "{key}: centre at {:?}", ins + k.center);
}
}
+4 -43
View File
@@ -83,22 +83,14 @@ fn dash_attedit_one_at_a_time_edits_the_selected_attributes() {
let mut s = with_block();
let h = handle(&insert(&mut s, 100.0, json!({"T": "abc"})));
type_lines(&mut s, &["-attedit", "y", "", "T", "", "105,0", ""]);
assert!(s.prompt_text().contains("[Value/Position/Height/Angle/Style/Layer/Color/Next] <N>"), "{}", s.prompt_text());
// Edit Position, Height, Angle, and Style
type_lines(&mut s, &["p", "10,20", "h", "2.5", "a", "45", "s", "Standard"]);
// Edit Value: change and replace
assert!(s.prompt_text().contains("[Value/Layer/Color/Next] <N>"), "{}", s.prompt_text());
// Unsupported options say so and keep the prompt.
s.cmdline("p").unwrap();
assert!(s.log.iter().any(|l| l.contains("Position is not available yet")), "{:?}", s.log);
type_lines(&mut s, &["v", "c", "b", "B", "v", "r", "replaced value", "n"]);
assert!(s.running.is_none(), "{}", s.prompt_text());
assert_eq!(value(&s, h, "T"), "replaced value");
assert_eq!(value(&s, h, "U"), "u");
let EntityKind::Insert(ins) = &s.doc().unwrap().entity(h).unwrap().kind else { panic!("not an insert") };
let att = ins.attribs.iter().find(|a| a.tag == "T").unwrap();
assert!((att.text.insert.x - 10.0).abs() < 1e-6);
assert!((att.text.insert.y - 20.0).abs() < 1e-6);
assert!((att.text.height - 2.5).abs() < 1e-6);
assert!((att.text.rotation.to_degrees() - 45.0).abs() < 1e-4);
assert_eq!(att.text.style, "Standard");
}
#[test]
@@ -117,34 +109,3 @@ fn attribute_tags_match_in_any_case_and_unknown_tags_are_reported() {
let r = s.execute("attedit", &json!({"handle": h.hex(), "values": {"T": "four"}})).unwrap();
assert_eq!(r, json!({"changed": 1}));
}
/// -ATTEDIT Position moves an aligned or fit attribute without losing its baseline: both of its
/// points move by the same offset (setting both to the picked point would leave no direction or
/// length to fit the text between).
#[test]
fn dash_attedit_position_keeps_an_aligned_attributes_baseline() {
use cadcraft_doc::HAlign;
use cadcraft_geom::Vec3;
for halign in [HAlign::Aligned, HAlign::Fit] {
let mut s = with_block();
let h = handle(&insert(&mut s, 100.0, json!({"T": "abc"})));
s.doc_mut()
.unwrap()
.modify_entity(h, |e| {
if let EntityKind::Insert(i) = &mut e.kind {
for a in i.attribs.iter_mut().filter(|a| a.tag == "T") {
a.text.halign = halign;
a.text.insert = Vec3::new(100.0, 1.0, 0.0);
a.text.align_pt = Some(Vec3::new(104.0, 1.0, 0.0));
}
}
})
.unwrap();
type_lines(&mut s, &["-attedit", "y", "", "T", "", "105,0", "", "p", "10,20", "n"]);
assert!(s.running.is_none(), "{}", s.prompt_text());
let EntityKind::Insert(ins) = &s.doc().unwrap().entity(h).unwrap().kind else { panic!("not an insert") };
let t = &ins.attribs.iter().find(|a| a.tag == "T").unwrap().text;
assert!(t.insert.xy().near(cadcraft_geom::Vec2::new(10.0, 20.0), 1e-9), "{halign:?}: {:?}", t.insert);
assert!(t.align_pt.is_some_and(|p| p.xy().near(cadcraft_geom::Vec2::new(14.0, 20.0), 1e-9)), "{halign:?}: {:?}", t.align_pt);
}
}
+1 -1
View File
@@ -38,7 +38,7 @@ fn dash_attedit_sets_layer_and_colour_of_one_attribute() {
for t in ["-attedit", "y", "", "T", "", "105,0", ""] {
s.cmdline(t).unwrap();
}
assert!(s.prompt_text().contains("[Value/Position/Height/Angle/Style/Layer/Color/Next] <N>"), "{}", s.prompt_text());
assert!(s.prompt_text().contains("[Value/Layer/Color/Next] <N>"), "{}", s.prompt_text());
s.cmdline("l").unwrap();
assert!(s.prompt_text().contains("Enter new layer name <0>"), "{}", s.prompt_text());
// An unknown layer is refused and asked again.
@@ -1,247 +0,0 @@
//! -LAYER stAte: AutoCAD 2024's layer state prompts and messages (measured with accoreconsole on a
//! drawing with layers A, red, and B), and the `layerstate.*` commands they run.
use cadcraft_engine::doc::LayerState;
use cadcraft_engine::{Input, Session};
use serde_json::json;
const LABELS: [&str; 10] = ["On", "Frozen", "Lock", "Plot", "Newvpfreeze", "Color", "lineType", "lineWeight", "Transparency", "plotStyle"];
/// The toggles AutoCAD lists before "Enter states to change", with `no` the ones set to No.
fn table(no: &[&str]) -> Vec<String> {
let mut v = vec!["States".to_string()];
v.extend(LABELS.iter().map(|l| format!("{l:<20}{}", if no.contains(l) { "No" } else { "Yes" })));
v
}
/// Layers A (red) and B; the current layer stays 0.
fn drawing() -> Session {
let mut s = Session::new();
s.script("-LAYER N A,B C 1 A\n\n").unwrap();
s
}
/// Run `script` to its end and return what it wrote besides the commands' names and -LAYER's
/// "Current layer" line.
fn run(s: &mut Session, script: &str) -> Vec<String> {
let at = s.log.len();
s.script(script).unwrap();
assert!(s.running.is_none(), "{script:?} ends at: {}", s.prompt_text());
s.log[at..].iter().filter(|l| !l.starts_with("Command: ") && !l.starts_with("Current layer:")).cloned().collect()
}
fn states(s: &Session) -> Vec<(String, u32)> {
s.doc().unwrap().layer_states.iter().map(|st| (st.name.clone(), st.mask)).collect()
}
fn state(name: &str, mask: u32) -> (String, u32) {
(name.to_string(), mask)
}
#[test]
fn save_asks_the_states_and_remembers_them_for_the_next_save() {
let mut s = drawing();
// Each toggle lists the states again; On off is AutoCAD's 2046.
let out = run(&mut s, "-LAYER A S S6 ON\n\n\n\nLINE 0,0 1,0\n\n");
assert_eq!(out, [table(&[]), table(&["On"])].concat());
assert_eq!(states(&s), [state("S6", 2046)]);
assert_eq!(s.doc().unwrap().model.len(), 1, "the next command runs");
// The next Save starts from the toggles the last one left: On alone is 513, then every
// toggle once more is 2046 (AutoCAD's S7 and S8).
let out = run(&mut s, "-LAYER A S S7 ON F L P N C T W TR S\n\n\n\n");
assert_eq!(out[..11], table(&["On"]));
assert_eq!(
out[out.len() - 11..],
table(&["Frozen", "Lock", "Plot", "Newvpfreeze", "Color", "lineType", "lineWeight", "Transparency", "plotStyle"])
);
run(&mut s, "-LAYER A S S8 ON F L P N C T W TR S\n\n\n\n");
run(&mut s, "-LAYER A S S9 ON\n\n\n\n");
assert_eq!(states(&s)[1..], [state("S7", 513), state("S8", 2046), state("S9", LayerState::ALL)]);
// Edit lists and changes the state's own mask (found in any case), not the next Save's
// toggles (AutoCAD: Edit S1 to 2015, then S2 is 2047).
let out = run(&mut s, "-LAYER A E s6 ON C\n\n\n\n");
assert_eq!(out, [table(&["On"]), table(&[]), table(&["Color"])].concat());
run(&mut s, "-LAYER A S S10\n\n\n\n");
assert_eq!(states(&s)[0], state("S6", 2015));
assert_eq!(states(&s)[4], state("S10", LayerState::ALL));
// Each -LAYER is one undo step.
s.undo().unwrap();
assert_eq!(states(&s).len(), 4);
s.undo().unwrap();
assert_eq!(states(&s)[0], state("S6", 2046));
// A state from AutoCAD after a restore (mask 67583 = 2047 + 65536) named as AutoCAD names a
// state renamed to "*X": `?` lists it, and Edit keeps the bit no toggle reaches.
s.doc_mut().unwrap().layer_states.push(LayerState { name: "*A1".into(), mask: 67583, ..LayerState::default() });
assert_eq!(
run(
&mut s,
"-LAYER A ?
"
)[2],
"*A1"
);
run(
&mut s,
"-LAYER A E *a1 C
",
);
assert_eq!(states(&s)[4], state("*A1", 67583 - 32));
}
#[test]
fn names_follow_autocads_rules_and_messages() {
let mut s = drawing();
run(&mut s, "-LAYER A S S1\n\n\n\n");
// A saved name in another case is refused and asked again.
let out = run(&mut s, "-LAYER A S s1 S2\n\n\n\n");
assert_eq!(out, [vec!["Layer state \"s1\" already exists.".to_string()], table(&[])].concat());
// The layer name characters, and more than 255 characters, are refused; Enter goes back.
let long = "y".repeat(256);
let out = run(&mut s, &format!("-LAYER A S *X a<b a,b {long}\n\n\n\n"));
assert_eq!(
out,
[
"\"*X\" is an invalid layer state name.",
"\"a<b\" is an invalid layer state name.",
"\"a,b\" is an invalid layer state name.",
&format!("\"{long}\" is an invalid layer state name.")
]
);
run(&mut s, &format!("-LAYER A S {}\n\n\n\n", "x".repeat(255)));
assert_eq!(states(&s).len(), 3);
run(&mut s, &format!("-LAYER A D {}\n\n\n", "x".repeat(255)));
// `?` lists by name without regard to case.
run(&mut s, "-LAYER A S b\n\n\n\n");
let list = ["Layer state", "-----------------------------", "b", "S1", "S2"];
assert_eq!(run(&mut s, "-LAYER A ?\n\n\n"), list);
// Each name prompt lists on `?`, says an unknown name and asks again, and Enter goes back.
let out = run(&mut s, "-LAYER A R ? NOSUCH\n\nE NOSUCH\n\nN NOSUCH\n\nD NOSUCH\n\n\n\n");
assert_eq!(out[..5], list);
assert_eq!(out[5..], ["Unknown layer state name."; 4]);
// Unknown options, Import and EXport.
let out = run(&mut s, "-LAYER A XYZ I EX\n\n\n");
assert_eq!(out, ["Invalid option keyword.", "-LAYER stAte Import is not available yet.", "-LAYER stAte EXport is not available yet."]);
let out = run(&mut s, "-LAYER A S T1 XYZ\n\n\n\n");
assert_eq!(out, [table(&[]), vec!["Invalid option keyword.".to_string()]].concat());
assert_eq!(states(&s).len(), 4, "T1 is saved after the invalid toggle");
run(&mut s, "-LAYER A D T1\n\n\n");
// Name: a name some state has in any case, the state's own too, is refused with two lines.
assert_eq!(run(&mut s, "-LAYER A N S1 S2\n\n\n"), ["Layer state could not be renamed.", "S2 already exists."]);
assert_eq!(run(&mut s, "-LAYER A N S1 s1\n\n\n"), ["Layer state could not be renamed.", "s1 already exists."]);
// A name with a refused character leaves the state as it is, with no message; Enter too.
assert!(run(&mut s, "-LAYER A N S1 a,b\n\n\n").is_empty());
assert!(run(&mut s, "-LAYER A N S1\n\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S1", "S2", "b"]);
// The old name in another case.
assert!(run(&mut s, "-LAYER A N s1 S9\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S9", "S2", "b"]);
assert!(run(&mut s, "-LAYER A D s9\n\n\n").is_empty());
assert_eq!(states(&s).iter().map(|st| st.0.as_str()).collect::<Vec<_>>(), ["S2", "b"]);
}
#[test]
fn esc_drops_the_state_being_saved_and_undo_takes_back_name_and_delete() {
let mut s = drawing();
run(
&mut s,
"-LAYER A S S1
",
);
// Esc at the toggles: that state isn't saved and the next Save's toggles stay as they were;
// what the same -LAYER did before Esc stays, as for the other -LAYER options.
s.script(
"-LAYER A S S2
S S3 C ON
",
)
.unwrap();
// AutoCAD 2024 asks for the toggles without "or" before them.
assert_eq!(
s.current_prompt().unwrap().display(),
"Enter states to change [On/Frozen/Lock/Plot/Newvpfreeze/Color/lineType/lineWeight/TRansparency/plotStyle]:"
);
s.input(Input::Cancel).unwrap();
assert!(s.running.is_none());
assert_eq!(states(&s), [state("S1", LayerState::ALL), state("S2", LayerState::ALL)]);
assert_eq!(s.settings.layer_state_mask, LayerState::ALL);
// Name and Delete are one undo step each, like Save.
run(
&mut s,
"-LAYER A N S1 S9
",
);
run(
&mut s,
"-LAYER A D S2
",
);
assert_eq!(states(&s), [state("S9", LayerState::ALL)]);
s.undo().unwrap();
assert_eq!(states(&s), [state("S9", LayerState::ALL), state("S2", LayerState::ALL)]);
s.undo().unwrap();
assert_eq!(states(&s), [state("S1", LayerState::ALL), state("S2", LayerState::ALL)]);
}
#[test]
fn restore_finds_the_state_in_any_case() {
let mut s = drawing();
run(&mut s, "-LAYER A S S1\n\n\n\n");
run(&mut s, "-LAYER C 3 A M C\n\n");
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.header.str("CLAYER", "0")), (cadcraft_color::Color::Index(3), "C".to_string()));
assert!(run(&mut s, "-LAYER A R s1\n\n\n").is_empty());
let d = s.doc().unwrap();
assert_eq!((d.layer("A").unwrap().color, d.header.str("CLAYER", "0")), (cadcraft_color::Color::Index(1), "0".to_string()));
}
#[test]
fn json_layer_states_take_a_mask_and_find_names_in_any_case() {
let mut s = drawing();
s.execute("layerstate.save", &json!({ "name": "M" })).unwrap();
s.execute("layerstate.save", &json!({ "name": "On", "mask": LayerState::ON })).unwrap();
for bad in [json!(4096), json!(-1), json!(1.5), json!("1")] {
assert!(s.execute("layerstate.save", &json!({ "name": "X", "mask": bad })).is_err(), "{bad}");
}
assert_eq!(states(&s), [state("M", LayerState::ALL), state("On", 513)]);
// Restore, Rename and Delete find a name in another case; a name another state has in any
// case is refused, the state's own in another case too.
s.execute("layer.set", &json!({ "name": "A", "color": "3" })).unwrap();
s.execute("layerstate.restore", &json!({ "name": "m" })).unwrap();
assert_eq!(s.doc().unwrap().layer("A").unwrap().color, cadcraft_color::Color::Index(1));
assert!(s.execute("layerstate.rename", &json!({ "from": "m", "to": "ON" })).is_err());
assert!(s.execute("layerstate.rename", &json!({ "from": "m", "to": "m" })).is_err());
s.execute("layerstate.rename", &json!({ "from": "m", "to": "M2" })).unwrap();
s.execute("layerstate.delete", &json!({ "name": "on" })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
// A name -LAYER stAte Save refuses is refused here too, and nothing is saved.
let long = "x".repeat(256);
for name in ["", " ", "a<b", "a\nb", long.as_str()] {
assert!(s.execute("layerstate.save", &json!({ "name": name })).is_err(), "{name:?}");
}
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
// Save onto a name another state has in another case replaces that state, as one spelled the
// same: AutoCAD 2024 keeps one state per name in any case.
s.execute("layerstate.save", &json!({ "name": "m2", "mask": LayerState::ON })).unwrap();
assert_eq!(states(&s), [state("m2", 513)]);
// Names that differ only in case (CADCraft's own record keeps the second of them, which AutoCAD
// 2024 doesn't see): Save and Delete take the one spelled so, though the other comes first, and
// leave the other.
s.doc_mut().unwrap().layer_states.insert(0, LayerState::new("M2", Vec::new(), ""));
s.execute("layerstate.save", &json!({ "name": "m2", "mask": LayerState::ON | LayerState::FROZEN })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL), state("m2", 515)]);
s.execute("layerstate.delete", &json!({ "name": "m2" })).unwrap();
assert_eq!(states(&s), [state("M2", LayerState::ALL)]);
}
-2
View File
@@ -4,7 +4,6 @@ mod annotate_options;
mod annotative;
mod arc_ctrl_direction;
mod array_commands;
mod array_key_point;
mod assoc_array;
mod attdef_command;
mod attdisp_attsync;
@@ -79,7 +78,6 @@ mod join_close;
mod json_param_validation;
mod layer_cmdline;
mod layer_merge_delete;
mod layer_state_cmdline;
mod layoff_repeat;
mod layout_prompts;
mod leader_command;
+7 -129
View File
@@ -76,135 +76,13 @@ fn rename_prompts_type_old_and_new_name() {
assert!(d.block("Pump").is_some() && d.layer("New").is_some() && d.layer("Old").is_none(), "{:?}", s.log);
assert_eq!(insert_targets(d), ["Assy", "Pump", "Pump", "Pump"]);
assert_eq!(d.model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 1);
// A type CADCraft lacks reads both names and reports.
let n = s.log.len();
s.script("-RENAME M a b\nLINE 0,0 2,0\n\n").unwrap();
// An unknown old name re-prompts; a type CADCraft lacks reads both names and reports.
s.script("-RENAME LA Missing\nNew\nNewer\n").unwrap();
assert!(s.running.is_none(), "{}", s.prompt_text());
assert!(s.log[n..].iter().any(|l| l.contains("Renaming a material is not available yet.")), "{:?}", &s.log[n..]);
assert!(s.doc().unwrap().layer("Newer").is_some());
let n = s.log.len();
s.script("-RENAME VP a b\nLINE 0,0 2,0\n\n").unwrap();
assert!(s.running.is_none(), "{}", s.prompt_text());
assert!(s.log[n..].iter().any(|l| l.contains("not available yet")), "{:?}", &s.log[n..]);
assert_eq!(s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 2);
}
/// What `script` adds to the log; the command has ended.
fn said(s: &mut Session, script: &str) -> Vec<String> {
let n = s.log.len();
s.script(script).unwrap();
assert!(s.running.is_none(), "{script}: {}", s.prompt_text());
s.log[n..].to_vec()
}
fn says(log: &[String], text: &str) -> bool {
log.iter().any(|l| l.contains(text))
}
#[test]
fn rename_ends_on_a_name_it_cannot_take_with_autocads_messages() {
// AutoCAD 2024 (accoreconsole, measured, the same for blocks, dimension styles, layers,
// linetypes, text styles, UCSs and views): `Cannot find layer "X".` for an old name that
// doesn't exist, `A layer named "X" already exists.` and `*Invalid*` for a new name that does,
// `Invalid layer name.` for one it can't take; each ends the command.
let mut s = drawing();
for name in ["A1", "A2"] {
s.execute("layer.new", &json!({ "name": name })).unwrap();
}
let log = said(&mut s, "-RENAME LA NOSUCH\nLINE 0,0 3,0\n\n");
assert!(says(&log, "Cannot find layer \"NOSUCH\"."), "{log:?}");
// The command ended there: the next input started LINE.
assert_eq!(s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count(), 1);
let log = said(&mut s, "-RENAME LA A1 A2\n");
assert!(says(&log, "A layer named \"A2\" already exists.") && says(&log, "*Invalid*"), "{log:?}");
let log = said(&mut s, "-RENAME LA A1 X<Y\n");
assert!(says(&log, "Invalid layer name."), "{log:?}");
// No new name at all is an invalid one too.
s.cmdline("-RENAME LA A1").unwrap();
let n = s.log.len();
s.cmdline("").unwrap();
assert!(s.running.is_none() && says(&s.log[n..], "Invalid layer name."), "{:?}", &s.log[n..]);
assert!(s.doc().unwrap().layer("A1").is_some());
said(&mut s, "-RENAME LA A1 B1\n");
assert!(s.doc().unwrap().layer("B1").is_some() && s.doc().unwrap().layer("A1").is_none());
// The old name in another case than stored, and the new name as typed: a rename to that case
// (AutoCAD 2024, measured: LAY1 typed lay1, new name lay1, gives lay1).
said(&mut s, "-RENAME LA b1 b1\n");
assert!(s.doc().unwrap().layers.iter().any(|l| l.name == "b1"));
// Old names AutoCAD 2024 won't rename (measured), each ending the command before the new name.
let lines = |s: &Session| s.doc().unwrap().model.iter().filter(|e| matches!(e.kind, EntityKind::Line(_))).count();
for (script, message) in [
("-RENAME LA 0\n", "Cannot rename layer \"0\"."),
("-RENAME LT continuous\n", "Cannot rename linetype \"continuous\"."),
("-RENAME LT ByLayer\n", "Invalid linetype name."),
("-RENAME LT byblock\n", "Invalid linetype name."),
("-RENAME LT CONTINUOUS\n", "Cannot rename linetype \"CONTINUOUS\"."),
("-RENAME B *Model_Space\n", "Invalid block name."),
("-RENAME B *U1\n", "Invalid block name."),
] {
let n = lines(&s);
let log = said(&mut s, &format!("{script}LINE 0,0 4,0\n\n"));
assert!(says(&log, message), "{script}: {log:?}");
assert_eq!(says(&log, "*Invalid*"), message.starts_with("Cannot"), "{script}: {log:?}");
assert_eq!(lines(&s), n + 1, "{script}: the next input starts a command");
}
// A UCS is "ucs" in the prompts and in "A ucs named", "UCS" in the other two.
for name in ["U1", "U2"] {
let ucs = cadcraft_engine::doc::Ucs { name: name.into(), origin: Default::default(), x_axis: Default::default(), y_axis: Default::default() };
s.doc_mut().unwrap().ucss.push(ucs);
}
s.cmdline("-RENAME U").unwrap();
assert!(s.prompt_text().contains("Enter old ucs name"), "{}", s.prompt_text());
s.cancel();
assert!(says(&said(&mut s, "-RENAME U NOSUCH\n"), "Cannot find UCS \"NOSUCH\"."));
assert!(says(&said(&mut s, "-RENAME U U1 U2\n"), "A ucs named \"U2\" already exists."));
assert!(says(&said(&mut s, "-RENAME U U1 X<Y\n"), "Invalid UCS name."));
}
#[test]
fn rename_takes_a_saved_viewport_configuration() {
// AutoCAD 2024 (measured): -RENAME VPort renames a saved configuration, every tile of it, old
// name in any case, and to another case of its own name; "*ACTIVE" (old or new), names with
// characters AutoCAD refuses and names already used are refused as for the other types.
let mut s = Session::new();
s.execute("-vports", &json!({ "option": "2", "arrangement": "vertical" })).unwrap();
s.execute("-vports", &json!({ "option": "save", "name": "CFG1" })).unwrap();
s.execute("-vports", &json!({ "option": "save", "name": "CFG3" })).unwrap();
let names = |s: &Session| -> Vec<(String, usize)> { s.doc().unwrap().vports.iter().map(|v| (v.name.clone(), v.tiles.len())).collect() };
said(&mut s, "-RENAME VP cfg1 CFG2\n");
assert_eq!(names(&s), [("*Active".to_string(), 2), ("CFG2".to_string(), 2), ("CFG3".to_string(), 2)]);
for (script, message) in [
// A refused old name ends the command before the new name is asked.
("-RENAME VP NOSUCH\n", "Cannot find viewport configuration \"NOSUCH\"."),
("-RENAME VP *ACTIVE\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 *ACTIVE\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 A<B\n", "Invalid viewport configuration name."),
("-RENAME VP CFG2 CFG3\n", "A viewport configuration named \"CFG3\" already exists."),
] {
let log = said(&mut s, script);
assert!(says(&log, message), "{script}: {log:?}");
// "*Invalid*" follows a name already used only.
assert_eq!(says(&log, "*Invalid*"), message.ends_with("already exists."), "{script}: {log:?}");
}
// No new name at all is an invalid one too (measured: CFG1, then Enter).
s.cmdline("-RENAME VP CFG2").unwrap();
let n = s.log.len();
s.cmdline("").unwrap();
assert!(s.running.is_none() && says(&s.log[n..], "Invalid viewport configuration name."), "{:?}", &s.log[n..]);
assert_eq!(names(&s), [("*Active".to_string(), 2), ("CFG2".to_string(), 2), ("CFG3".to_string(), 2)]);
said(&mut s, "-RENAME VP CFG2 cfg2\n");
assert_eq!(names(&s), [("*Active".to_string(), 2), ("cfg2".to_string(), 2), ("CFG3".to_string(), 2)]);
// The new name is compared with the stored one, not with the old name as typed (measured:
// CFG1 typed cfg1 to cfg1 gives cfg1; typed cfg1 to CFG1 changes nothing).
said(&mut s, "-RENAME VP CFG2 CFG2\n");
assert_eq!(names(&s)[1].0, "CFG2");
said(&mut s, "-RENAME VP cfg2 CFG2\n");
assert_eq!(names(&s)[1].0, "CFG2");
said(&mut s, "-RENAME VP cfg2 cfg2\n");
assert_eq!(names(&s)[1].0, "cfg2");
// The JSON form too, which never takes the configuration shown, and refuses a name already
// used (in any case) or with a character AutoCAD refuses, as for the other tables.
s.execute("rename", &json!({ "table": "vport", "from": "CFG3", "to": "Pair" })).unwrap();
assert_eq!(names(&s)[2].0, "Pair");
for to in ["Shown", "CFG2", "A<B"] {
let from = if to == "Shown" { "*Active" } else { "Pair" };
assert!(s.execute("rename", &json!({ "table": "vport", "from": from, "to": to })).is_err(), "{from} to {to}");
}
s.execute("rename", &json!({ "table": "vport", "from": "pair", "to": "PAIR" })).unwrap();
assert_eq!(names(&s), [("*Active".to_string(), 2), ("cfg2".to_string(), 2), ("PAIR".to_string(), 2)]);
}
-294
View File
@@ -1,294 +0,0 @@
//! Saved layer states as AutoCAD keeps them: the LAYER table's extension dictionary holds an
//! `ACAD_LAYERSTATES` dictionary of one XRECORD per state. Measured in AutoCAD 2024 (DXFOUT of
//! states saved with -LAYER stAte), an XRECORD holds `280 1`, the mask (91), a text (301: empty
//! as -LAYER saves it; AutoCAD keeps one a file holds through restore and DXFOUT), `290 0` and
//! the current layer's name (302), then for each layer its LAYER handle (330),
//! flags (90: 1 off, 2 frozen, 4 locked, 8 plotted, 16 frozen in new viewports), colour index
//! (62), lineweight (370), for a layer of an xref 93 (0 for a newly attached one; a file can hold
//! 1, whose meaning isn't measured), LTYPE handle (331), plot style (in a drawing of colour-dependent
//! plot styles the name `Color_N` in group 1, N its colour index; of named ones the handle of its
//! placeholder object in group 390), transparency (440: 0 opaque, else `0x02000000 | alpha`) and,
//! for a true colour, 92 (`0xC2RRGGBB`).
//!
//! States AutoCAD's dictionary can't hold stay in CADCraft's own record (`CADCRAFT_LAYERSTATES`):
//! the view layer snapshots (`*VIEW name`), and a name that repeats an earlier one in another
//! case: AutoCAD 2024 opens the entries `S` and `s` of one dictionary as one state, named as the
//! first entry and holding the last one's record (measured), and so does the reader here.
use std::collections::{HashMap, HashSet};
use cadcraft_color::{Color, Rgb};
use cadcraft_doc::{Layer, LayerState, Lineweight};
use craft_dxf::Tag;
use crate::dxf_ext::{transparency_from_dxf, transparency_to_dxf};
/// The key of the states dictionary in the LAYER table's extension dictionary.
pub(crate) const KEY: &str = "ACAD_LAYERSTATES";
/// The prefix of a true colour in group 92.
const TRUE_COLOR: u32 = 0xC200_0000;
/// The bytes of layers the states of one file may copy (CWE-400). Each entry of a state is a copy
/// of the drawing's layer, its names and description included, so without a bound a small file
/// naming one layer with a long description in a great many entries would take gigabytes.
pub(crate) const MAX_COPIED_BYTES: usize = 256 << 20;
/// Which of `states` go into AutoCAD's dictionary (the others into CADCraft's record).
pub(crate) fn in_acad(states: &[LayerState]) -> Vec<bool> {
let mut seen: HashSet<String> = HashSet::with_capacity(states.len());
states.iter().map(|st| !st.name.trim().is_empty() && !st.name.starts_with('*') && seen.insert(st.name.to_lowercase())).collect()
}
/// The states CADCraft's own record keeps (those [`in_acad`] leaves out).
pub(crate) fn own(states: &[LayerState]) -> Vec<LayerState> {
states.iter().zip(in_acad(states)).filter(|(_, acad)| !acad).map(|(st, _)| st.clone()).collect()
}
/// Handles of the objects that hold the drawing's states in AutoCAD's form.
#[derive(Default)]
pub(crate) struct Plan {
/// The LAYER table, which owns the extension dictionary.
pub table: String,
/// The LAYER table's extension dictionary.
pub xdict: String,
/// The `ACAD_LAYERSTATES` dictionary.
dict: String,
/// (index in the drawing's states, XRECORD handle).
records: Vec<(usize, String)>,
}
impl Plan {
pub fn new(states: &[LayerState], mut handle: impl FnMut() -> String) -> Self {
let acad = in_acad(states);
if !acad.contains(&true) {
return Plan::default();
}
let xdict = handle();
let dict = handle();
let records = acad.iter().enumerate().filter(|(_, a)| **a).map(|(i, _)| (i, handle())).collect();
Plan { table: String::new(), xdict, dict, records }
}
pub fn is_empty(&self) -> bool {
self.records.is_empty()
}
}
/// What the state objects need from the rest of the file.
pub(crate) struct Refs<'a> {
/// Upper-case layer name → LAYER record handle.
pub layers: &'a HashMap<String, String>,
/// Upper-case linetype name → LTYPE record handle.
pub ltypes: &'a HashMap<String, String>,
/// Upper-case plot style name → its placeholder object's handle.
pub pstyles: &'a HashMap<String, String>,
/// Plot styles by colour (`$PSTYLEMODE` 1): the plot style name is `Color_N`.
pub colour_dependent: bool,
}
/// The objects of plan `p`: the extension dictionary, the `ACAD_LAYERSTATES` dictionary and one
/// XRECORD per state. Layers the drawing no longer has are left out of a state (AutoCAD names
/// layers by handle).
pub(crate) fn objects(p: &Plan, states: &[LayerState], refs: &Refs) -> Vec<Tag> {
let mut t = Vec::new();
if p.is_empty() {
return t;
}
t.extend([Tag::s(0, "DICTIONARY"), Tag::s(5, &p.xdict), Tag::s(330, &p.table), Tag::s(100, "AcDbDictionary"), Tag::i(280, 1), Tag::i(281, 1)]);
t.extend([Tag::s(3, KEY), Tag::s(360, &p.dict)]);
t.extend([Tag::s(0, "DICTIONARY"), Tag::s(5, &p.dict), Tag::s(102, "{ACAD_REACTORS"), Tag::s(330, &p.xdict), Tag::s(102, "}")]);
t.extend([Tag::s(330, &p.xdict), Tag::s(100, "AcDbDictionary"), Tag::i(281, 1)]);
let planned = || p.records.iter().filter_map(|(i, h)| Some((states.get(*i)?, h)));
for (st, h) in planned() {
t.extend([Tag::s(3, &st.name), Tag::s(350, h)]);
}
for (st, h) in planned() {
t.extend([Tag::s(0, "XRECORD"), Tag::s(5, h), Tag::s(102, "{ACAD_REACTORS"), Tag::s(330, &p.dict), Tag::s(102, "}"), Tag::s(330, &p.dict)]);
t.extend([Tag::s(100, "AcDbXrecord"), Tag::i(280, 1), Tag::i(91, i64::from(st.mask)), Tag::s(301, &st.description), Tag::i(290, 0)]);
t.push(Tag::s(302, &st.current));
for l in &st.layers {
if let Some(lh) = refs.layers.get(&l.name.to_ascii_uppercase()) {
layer(&mut t, l, lh, refs);
}
}
}
t
}
/// One layer of a state's XRECORD.
fn layer(t: &mut Vec<Tag>, l: &Layer, handle: &str, refs: &Refs) {
let flags = i64::from(!l.on) | i64::from(l.frozen) << 1 | i64::from(l.locked) << 2 | i64::from(l.plot) << 3 | i64::from(l.vp_freeze_new) << 4;
let aci = match l.color {
Color::True(rgb) => i64::from(cadcraft_color::nearest_aci(rgb)),
c => i64::from(c.to_aci()).clamp(1, 255),
};
t.extend([Tag::s(330, handle), Tag::i(90, flags), Tag::i(62, aci), Tag::i(370, i64::from(l.lineweight.to_dxf()))]);
if crate::dxf_xref::dependent(&l.name) {
t.push(Tag::i(93, 0));
}
// A linetype the drawing no longer has: Continuous, which every drawing has.
if let Some(lt) = refs.ltypes.get(&l.linetype.to_ascii_uppercase()).or_else(|| refs.ltypes.get("CONTINUOUS")) {
t.push(Tag::s(331, lt));
}
if refs.colour_dependent {
t.push(Tag::s(1, format!("Color_{aci}")));
} else if let Some(ps) = refs.pstyles.get(&l.plot_style.trim().to_ascii_uppercase()).or_else(|| refs.pstyles.get("NORMAL")) {
t.push(Tag::s(390, ps));
}
t.push(Tag::i(440, if l.transparency == 0 { 0 } else { transparency_to_dxf(l.transparency) }));
if let Color::True(rgb) = l.color {
t.push(Tag::i(92, i64::from(i32::from_be_bytes((TRUE_COLOR | rgb.to_u32()).to_be_bytes()))));
}
}
/// What a state's handles name in the drawing being read.
pub(crate) struct Lookup<'a> {
/// The drawing's layer a LAYER handle names: a state's layer starts as a copy of it (what the
/// state doesn't hold, such as the description, is the drawing's).
pub layer: &'a dyn Fn(&str) -> Option<Layer>,
/// The linetype an LTYPE handle names.
pub ltype: &'a dyn Fn(&str) -> Option<String>,
/// The plot style a placeholder handle names.
pub pstyle: &'a dyn Fn(&str) -> Option<String>,
/// Plot styles by colour: group 1 (`Color_N`) says nothing the layer's colour doesn't.
pub colour_dependent: bool,
}
/// The state `name` from its XRECORD's groups. A layer whose record is gone (AutoCAD keeps a
/// purged layer's entry, measured) is skipped. A layer named in two entries is in the state once,
/// the later entry's groups over the earlier one's, as restoring both in turn did: AutoCAD 2024
/// restores the later one (measured with entries that each set every property). Each copy of a
/// layer is charged to `budget`, the file's [`MAX_COPIED_BYTES`]; once it is spent, the entries
/// left are left out.
pub(crate) fn read(name: &str, tags: &[Tag], lookup: &Lookup, budget: &mut usize) -> LayerState {
let mut st = LayerState { name: name.to_string(), ..LayerState::default() };
// The data follows the subclass marker (an XRECORD without one holds none).
let start = tags.iter().position(|t| t.code == 100 && t.str().trim() == "AcDbXrecord").map_or(tags.len(), |i| i + 1);
let body = tags.get(start..).unwrap_or_default();
let first = body.iter().position(|t| t.code == 330).unwrap_or(body.len());
for t in body.get(..first).unwrap_or_default() {
match t.code {
91 => st.mask = t.str().trim().parse::<u32>().unwrap_or(LayerState::ALL),
301 => st.description = t.str(),
302 => st.current = t.str(),
_ => {}
}
}
let rest = body.get(first..).unwrap_or_default();
// The index in the state of each layer by its LAYER handle.
let mut index: HashMap<String, usize> = HashMap::new();
let mut at = 0;
while let Some(group) = rest.get(at..) {
let Some(head) = group.first() else { break };
let len = group.iter().skip(1).position(|t| t.code == 330).map_or(group.len(), |n| n + 1);
at += len;
let groups = group.get(1..len).unwrap_or_default();
let key = head.str().trim().to_ascii_uppercase();
if let Some(slot) = index.get(&key).and_then(|&i| st.layers.get_mut(i)) {
entry(slot, groups, lookup);
} else if let Some(mut l) = (lookup.layer)(&head.str()) {
let Some(left) = budget.checked_sub(cost(&l)) else { break };
*budget = left;
entry(&mut l, groups, lookup);
index.insert(key, st.layers.len());
st.layers.push(l);
}
}
st
}
/// The bytes a copy of layer `l` takes.
fn cost(l: &Layer) -> usize {
std::mem::size_of::<Layer>() + l.name.len() + l.linetype.len() + l.description.len() + l.plot_style.len()
}
/// A layer's properties from the groups after its handle.
fn entry(l: &mut Layer, groups: &[Tag], lookup: &Lookup) {
let int = |t: &Tag| t.str().trim().parse::<i64>().ok();
let mut true_color = None;
for t in groups {
match t.code {
90 => {
if let Some(f) = int(t) {
(l.on, l.frozen, l.locked, l.plot, l.vp_freeze_new) = (f & 1 == 0, f & 2 != 0, f & 4 != 0, f & 8 != 0, f & 16 != 0);
}
}
62 => {
if let Some(c) = int(t).map(i64::abs).and_then(|c| u8::try_from(c).ok()).filter(|c| *c >= 1) {
l.color = Color::Index(c);
}
}
92 => true_color = int(t).and_then(|v| u32::try_from(v & 0xFFFF_FFFF).ok()).filter(|v| v & 0xFF00_0000 == TRUE_COLOR),
370 => {
if let Some(w) = int(t).and_then(|w| i16::try_from(w).ok()) {
l.lineweight = Lineweight::from_dxf(w);
}
}
331 => {
if let Some(lt) = (lookup.ltype)(&t.str()) {
l.linetype = lt;
}
}
390 => {
if let Some(ps) = (lookup.pstyle)(&t.str()) {
l.plot_style = ps;
}
}
1 if !lookup.colour_dependent => l.plot_style = t.str(),
440 => {
if let Some(v) = int(t) {
l.transparency = transparency_from_dxf(v).unwrap_or(0);
}
}
_ => {}
}
}
if let Some(v) = true_color {
l.color = Color::True(Rgb::from_u32(v & 0x00FF_FFFF));
}
}
#[cfg(test)]
mod tests {
use super::*;
/// A state's XRECORD groups with an entry per (layer handle, colour index).
fn tags(entries: &[(&str, i64)]) -> Vec<Tag> {
let mut t = vec![Tag::s(100, "AcDbXrecord"), Tag::i(280, 1), Tag::i(91, 2047), Tag::s(302, "0")];
for (h, aci) in entries {
t.extend([Tag::s(330, *h), Tag::i(90, 8)]);
// 0: no colour group.
if *aci != 0 {
t.push(Tag::i(62, *aci));
}
}
t
}
#[test]
fn a_layer_named_twice_takes_its_last_entry_and_copies_stop_at_the_budget() {
let layer = |h: &str| match h {
"A1" => Some(Layer::new("A")),
"B1" => Some(Layer::new("B")),
_ => None,
};
let none = |_: &str| None::<String>;
let lookup = Lookup { layer: &layer, ltype: &none, pstyle: &none, colour_dependent: true };
let colours = |st: &LayerState| st.layers.iter().map(|l| (l.name.clone(), l.color)).collect::<Vec<_>>();
// AutoCAD 2024 restores the last of two entries of one layer (measured: green, then blue,
// restores blue); it stays in the first one's place. A later entry without a colour keeps
// the earlier one's, as restoring both in turn did.
let mut budget = MAX_COPIED_BYTES;
let st = read("S", &tags(&[("A1", 3), ("B1", 2), ("A1", 5), ("B1", 0)]), &lookup, &mut budget);
assert_eq!(colours(&st), [("A".to_string(), Color::Index(5)), ("B".to_string(), Color::Index(2))]);
// Each new copy is charged (a repeated entry copies nothing); past the budget the rest of
// the entries, and of the file's states, are left out.
let one = cost(&Layer::new("A"));
let mut budget = one;
let st = read("S", &tags(&[("A1", 3), ("A1", 4), ("B1", 5)]), &lookup, &mut budget);
assert_eq!((colours(&st), budget), (vec![("A".to_string(), Color::Index(4))], 0));
let st = read("T", &tags(&[("B1", 2)]), &lookup, &mut budget);
assert!(st.layers.is_empty());
}
}
+21 -77
View File
@@ -36,11 +36,10 @@ const MODELLED_KEYS: &[&str] = &[
"ACAD_IMAGE_VARS",
];
/// Extension dictionary entries not kept raw: dimension associativity and the LAYER table's layer
/// states (CADCraft reads and rewrites them), draw order and annotation scale contexts (written
/// from their own models by the changes that model them; stale copies would contradict the
/// drawing).
const MODELLED_XDICT_KEYS: &[&str] = &["ACAD_DIMASSOC", "ACAD_LAYERSTATES", "ACAD_SORTENTS", "ACDBCONTEXTDATAMANAGER"];
/// Extension dictionary entries not kept raw: dimension associativity (CADCraft reads and
/// rewrites it), draw order and annotation scale contexts (written from their own models by the
/// changes that model them; stale copies would contradict the drawing).
const MODELLED_XDICT_KEYS: &[&str] = &["ACAD_DIMASSOC", "ACAD_SORTENTS", "ACDBCONTEXTDATAMANAGER"];
/// Applications whose xdata CADCraft reads and writes itself. `ACAD` holds dimension overrides
/// (DSTYLE) on dimensions and dimension styles; elsewhere it is kept.
@@ -990,7 +989,20 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
let root = objects.first().filter(|(k, _, _)| is_dictionary(k)).map(|(_, s, _)| *s);
let root_keys: HashSet<String> =
objects.iter().find(|(_, s, _)| Some(*s) == root).map(|(_, _, t)| entries(t).into_iter().map(|(k, _)| up(&k)).collect()).unwrap_or_default();
let (mut attached, merged) = kept_dictionaries(f, &xd, &recs, tags);
// Extension dictionaries that go on a written record (one without its own).
let mut block = String::new();
let mut attached: HashSet<String> = HashSet::new();
for r in &recs {
if r.kind == "BLOCK" {
block = up(&val(body(r), 2).unwrap_or_default());
}
if let Some(x) = extra_for(f, &xd, r, body(r), &block)
&& let Some(xd) = x.xdict
&& head(body(r)).xdict.is_none()
{
attached.insert(xd.hex());
}
}
for (_, t) in planned.values().flatten() {
let x = head(t.get(1..).unwrap_or(&[])).handle.and_then(|h| handle(&h)).and_then(|h| entity_extra(f, &xd, h));
attached.extend(x.and_then(|x| x.xdict).map(Handle::hex));
@@ -1038,7 +1050,7 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
if nod.contains(&owner) {
break dict_entries.get(&cur).is_some_and(|k| !root_keys.contains(&up(k))) && root.is_some();
}
if attached.contains(&cur) || merged.contains_key(&cur) {
if attached.contains(&cur) {
break true;
}
break unknown.contains(&owner) && written.contains(&owner);
@@ -1056,13 +1068,6 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
alive.insert(o.handle.hex(), format!("{next:X}"));
next = next.saturating_add(1);
}
// A merged dictionary is not written: what pointed at it points at the written one.
for (kept, own) in &merged {
if let Some(h) = alive.get_mut(kept) {
h.clone_from(own);
}
}
let merged_into: HashMap<String, &ForeignObject> = merged.iter().filter_map(|(kept, own)| Some((own.clone(), *objs.get(kept)?))).collect();
let entities: HashSet<String> = all_entities(d).map(|e| e.handle.hex()).filter(|h| written.contains(h)).collect();
let map = Map { f, alive, raw: objs.keys().cloned().collect(), roles, entities };
let mut out: Vec<Tag> = Vec::with_capacity(tags.len() + f.objects.iter().map(|o| o.tags.len() + 1).sum::<usize>());
@@ -1076,7 +1081,7 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
continue;
}
if r.kind == "ENDSEC" && r.sec == "OBJECTS" {
for o in f.objects.iter().filter(|o| map.alive.contains_key(&o.handle.hex()) && !merged.contains_key(&o.handle.hex())) {
for o in f.objects.iter().filter(|o| map.alive.contains_key(&o.handle.hex())) {
let number = is_proxy(&o.kind).then(|| renumber(class_number(o.tags.iter().map(|r| (r.code, r.value.as_str()))))).flatten();
match number {
Some(n) => {
@@ -1100,15 +1105,11 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
}
out.extend(tags.get(r.start).cloned());
let x = extra_for(f, &xd, r, b, &block);
let joined = joined_into(&merged_into, b);
if x.is_none() && Some(r.start) != root && joined.is_none() {
if x.is_none() && Some(r.start) != root {
out.extend(b.iter().cloned());
continue;
}
record(&map, r, b, x.as_deref(), None, Some(r.start) == root, &mut out);
if let Some(kept) = joined {
join_entries(&map, b, kept, &mut out);
}
}
add_appids(&mut out);
let top = max_handle(&out).saturating_add(1);
@@ -1120,32 +1121,6 @@ pub(crate) fn finish(tags: &mut Vec<Tag>, d: &Drawing, reactors: &HashMap<Handle
*tags = out;
}
/// Kept extension dictionaries of written records: those that go on a record without its own,
/// and those whose entries join the one the writer gave a table (the LAYER table's, holding the
/// layer states) as kept dictionary → the written one.
fn kept_dictionaries(f: &Foreign, xd: &XdataOf, recs: &[Rec], tags: &[Tag]) -> (HashSet<String>, HashMap<String, String>) {
let body = |r: &Rec| tags.get(r.start + 1..r.end).unwrap_or(&[]);
let mut block = String::new();
let mut attached: HashSet<String> = HashSet::new();
let mut merged: HashMap<String, String> = HashMap::new();
for r in recs {
if r.kind == "BLOCK" {
block = up(&val(body(r), 2).unwrap_or_default());
}
let Some(kept) = extra_for(f, xd, r, body(r), &block).and_then(|x| x.xdict) else { continue };
match head(body(r)).xdict {
None => {
attached.insert(kept.hex());
}
Some(own) if r.sec == "TABLES" => {
merged.insert(kept.hex(), own);
}
Some(_) => {}
}
}
(attached, merged)
}
/// Complete source tables keep positional identities even when names repeat.
fn proxy_class_number(f: &Foreign, numbers: &HashMap<String, i64>, old: Option<i64>) -> Option<i64> {
if f.complete_class_table {
@@ -1377,37 +1352,6 @@ fn record(map: &Map, r: &Rec, b: &[Tag], x: Option<&ForeignExtra>, unknown: Opti
}
}
/// The kept dictionary whose entries join written dictionary `b`, if any.
fn joined_into<'a>(merged_into: &HashMap<String, &'a ForeignObject>, b: &[Tag]) -> Option<&'a ForeignObject> {
if merged_into.is_empty() {
return None;
}
head(b).handle.and_then(|h| merged_into.get(&h).copied())
}
/// The entries of kept dictionary `kept` that written dictionary `b` doesn't have (by key, without
/// regard to case), appended to it with their handles remapped; entries whose object is gone are
/// left out.
fn join_entries(map: &Map, b: &[Tag], kept: &ForeignObject, out: &mut Vec<Tag>) {
let has = |key: &str| b.iter().any(|t| t.code == 3 && up(&t.str()) == up(key));
let mut key: Option<&str> = None;
for t in kept.tags.iter().take_while(|t| t.code < 1000) {
match t.code {
3 => key = Some(t.value.as_str()),
350 | 360 => {
if let Some(k) = key.take()
&& !has(k)
&& let Some(h) = map.get(&t.value).filter(|h| h != "0")
{
out.push(Tag::s(3, k));
out.push(Tag::s(t.code, h));
}
}
_ => {}
}
}
}
/// Kept xdata of applications the record doesn't already carry, handles remapped.
fn xdata(map: &Map, x: &ForeignExtra, own: &HashSet<String>, out: &mut Vec<Tag>) {
let mut skip = false;
+5 -96
View File
@@ -8,14 +8,10 @@ use super::{Drawing, EntityKind, Group, Handle, HashMap, MLeaderStyle, PageSetup
pub(super) struct Objects {
/// Dictionary entry handle (upper case) → entry name.
names: HashMap<String, String>,
/// (dictionary handle, entry handle), both upper case, in the order the dictionaries list them.
entry_order: Vec<(String, String)>,
/// SCALE objects (the annotation scale list), in file order.
scales: Vec<cadcraft_doc::AnnoScale>,
/// XRECORD handle (upper case) → its groups.
xrecords: HashMap<String, Vec<Tag>>,
/// XRECORD handles in file order.
xrecord_order: Vec<String>,
/// TABLESTYLE objects: (handle, groups).
table_styles: Vec<(String, Vec<Tag>)>,
/// DIMASSOC objects.
@@ -54,11 +50,7 @@ impl Objects {
if let Some(n) = name.take()
&& self.names.len() < MAX_OBJECTS
{
let entry = t.str().trim().to_ascii_uppercase();
if self.entry_order.len() < MAX_OBJECTS {
self.entry_order.push((h.clone(), entry.clone()));
}
self.names.insert(entry, n);
self.names.insert(t.str().trim().to_ascii_uppercase(), n);
}
}
_ => {}
@@ -66,9 +58,7 @@ impl Objects {
}
}
"XRECORD" if self.xrecords.len() < MAX_OBJECTS => {
if self.xrecords.insert(h.clone(), tags.to_vec()).is_none() {
self.xrecord_order.push(h);
}
self.xrecords.insert(h, tags.to_vec());
}
"TABLESTYLE" if self.table_styles.len() < MAX_OBJECTS => self.table_styles.push((h, tags.to_vec())),
"DIMASSOC" if self.dimassocs.len() < MAX_OBJECTS => self.dimassocs.push(tags.to_vec()),
@@ -90,65 +80,6 @@ impl Objects {
}
}
/// The layer states of the LAYER table's `ACAD_LAYERSTATES` dictionary (its XRECORDs, in file
/// order), read with the drawing's layers and linetypes. Entries whose names differ only in case
/// are one state, as AutoCAD 2024 opens them (measured with `S` and `s` in both orders): named as
/// the first of them in the dictionary, holding the last one's record, where the first of their
/// records comes in the file.
fn acad_layer_states(&self, d: &Drawing, rx: &Rx) -> Vec<cadcraft_doc::LayerState> {
let dicts: std::collections::HashSet<&str> =
self.names.iter().filter(|(_, n)| n.eq_ignore_ascii_case(crate::dxf_layer_states::KEY)).map(|(h, _)| h.as_str()).collect();
if dicts.is_empty() {
return Vec::new();
}
let mut by_name: HashMap<String, &cadcraft_doc::Layer> = HashMap::with_capacity(d.layers.len());
for l in &d.layers {
by_name.entry(l.name.to_ascii_lowercase()).or_insert(l);
}
let layer_of =
|h: &str| rx.layers.get(&h.trim().to_ascii_uppercase()).and_then(|n| by_name.get(&n.to_ascii_lowercase())).map(|l| (*l).clone());
let ltype_of = |h: &str| rx.ltypes.get(&h.trim().to_ascii_uppercase()).cloned();
let pstyle_of = |h: &str| rx.pstyles.get(&h.trim().to_ascii_uppercase()).cloned();
let lookup = crate::dxf_layer_states::Lookup {
layer: &layer_of,
ltype: &ltype_of,
pstyle: &pstyle_of,
colour_dependent: d.header.i64("PSTYLEMODE", 1) != 0,
};
let ours = |tags: &[Tag]| owner(tags).is_some_and(|o| dicts.contains(o.as_str()));
// By lower-case name: the first entry's name and the last entry's record, in dictionary order.
let mut first: HashMap<String, &String> = HashMap::new();
let mut last: HashMap<String, &Vec<Tag>> = HashMap::new();
for (dict, h) in &self.entry_order {
if dicts.contains(dict.as_str())
&& let (Some(name), Some(tags)) = (self.names.get(h), self.xrecords.get(h))
&& ours(tags)
{
first.entry(name.to_ascii_lowercase()).or_insert(name);
last.insert(name.to_ascii_lowercase(), tags);
}
}
let mut out = Vec::new();
let mut taken = std::collections::HashSet::new();
let mut budget = crate::dxf_layer_states::MAX_COPIED_BYTES;
for h in &self.xrecord_order {
let (Some(tags), Some(name)) = (self.xrecords.get(h), self.names.get(h)) else { continue };
if out.len() >= crate::dxf_ext::MAX_LAYER_STATES {
break;
}
if !ours(tags) {
continue;
}
let key = name.to_ascii_lowercase();
if taken.insert(key.clone()) {
let name = first.get(&key).copied().unwrap_or(name);
let tags = last.get(&key).copied().unwrap_or(tags);
out.push(crate::dxf_layer_states::read(name, tags, &lookup, &mut budget));
}
}
out
}
/// The text of the CADCraft XRECORD stored under `key` in a dictionary (its 1/3 strings).
pub(super) fn xrecord_text(&self, key: &str) -> Option<String> {
let h = self.names.iter().find(|(_, n)| n.as_str() == key).map(|(h, _)| h)?;
@@ -277,18 +208,10 @@ impl Objects {
if let Some(p) = self.xrecord_text(crate::dxf_ext::ANNOTATION_KEY).and_then(|t| crate::dxf_ext::parse_anno(&t)) {
crate::dxf_ext::apply_anno(d, p);
}
// Saved layer states: AutoCAD's, then those of CADCraft's own record (a file of an
// earlier version keeps them all there) that AutoCAD's doesn't hold.
let mut states = self.acad_layer_states(d, rx);
if let Some(own) = self.xrecord_text(crate::dxf_ext::LAYER_STATES_KEY).and_then(|t| crate::dxf_ext::parse_layer_states(&t)) {
let mut names: std::collections::HashSet<String> = states.iter().map(|s| s.name.clone()).collect();
for st in own {
if states.len() < crate::dxf_ext::MAX_LAYER_STATES && names.insert(st.name.clone()) {
states.push(st);
}
}
// Saved layer states.
if let Some(states) = self.xrecord_text(crate::dxf_ext::LAYER_STATES_KEY).and_then(|t| crate::dxf_ext::parse_layer_states(&t)) {
d.layer_states = states;
}
d.layer_states = states;
// The drawing's plot style tables.
if let Some(tables) = self.xrecord_text(crate::dxf_ext::PLOT_STYLES_KEY).and_then(|t| crate::dxf_ext::parse_plot_styles(&t)) {
d.plot_style_tables = tables;
@@ -308,20 +231,6 @@ impl Objects {
}
}
/// An object's owner (its first group 330 outside a `102` group), upper case.
fn owner(tags: &[Tag]) -> Option<String> {
let mut inside = false;
for t in tags {
match t.code {
102 => inside = t.str().trim().starts_with('{'),
330 if !inside => return Some(t.str().trim().to_ascii_uppercase()),
100 => return None,
_ => {}
}
}
None
}
/// Page setup from a LAYOUT object's AcDbPlotSettings fields (sizes and margins in mm).
pub(super) fn page_setup(t: &T) -> PageSetup {
let mut p = PageSetup::default();
-2
View File
@@ -58,8 +58,6 @@ pub(super) struct Ctx {
pub(super) frozen_341: bool,
/// MTEXT columns as the legacy groups 75..79 even from R2018 (the groups AutoLISP lists).
pub(super) legacy_columns: bool,
/// Saved layer states in AutoCAD's form (the LAYER table's extension dictionary).
pub(super) layer_states: crate::dxf_layer_states::Plan,
}
impl Ctx {
-8
View File
@@ -143,18 +143,10 @@ pub(super) fn vport_table(w: &mut W, d: &Drawing, ext: Bounds2) {
}
pub(super) fn table_head(w: &mut W, name: &str, count: usize) -> String {
table_head_x(w, name, count, None)
}
/// A table's head, with its extension dictionary `xdict` when it has one.
pub(super) fn table_head_x(w: &mut W, name: &str, count: usize, xdict: Option<&str>) -> String {
let h = w.h();
w.s(0, "TABLE");
w.s(2, name);
w.s(5, h.clone());
if let Some(x) = xdict {
w.group("ACAD_XDICTIONARY", 360, &[x]);
}
w.s(330, "0");
w.s(100, "AcDbSymbolTable");
w.i(70, count as i64);
+8 -29
View File
@@ -4,7 +4,7 @@ use super::common::annotative_xdata;
use super::ctx::{AssocObj, Ctx};
use super::entity::{entity, hatch_reactors};
use super::header::{code_page, header_vars};
use super::layout::{paper_views, record_head, sheet_first, table_head, table_head_x, vport_table};
use super::layout::{paper_views, record_head, sheet_first, table_head, vport_table};
use super::objects::{cadcraft_fonts_name, group_obj, mleader_style_obj, scale_list, table_style_obj};
use super::{
Block, Color, DimStyle, DimVal, Drawing, Entity, EntityKind, EntityStore, Group, HVal, Handle, HashMap, Layout, MLeaderStyle, PageSetup, Space,
@@ -68,7 +68,7 @@ fn write_tables(w: &mut W, plan: TableWritePlan<'_>) -> HashMap<String, String>
}
}
w.s(0, "ENDTAB");
write_layer_table(w, d, &mut cx.layer_states);
write_layer_table(w, d);
// STYLE. Linetype shapes from a shape file that isn't a text style get an unnamed shape
// style record (70 bit 1) naming the file.
let mut shape_files: Vec<String> = Vec::new();
@@ -185,12 +185,8 @@ fn write_tables(w: &mut W, plan: TableWritePlan<'_>) -> HashMap<String, String>
ltype_handles
}
/// The LAYER table; when the drawing has layer states AutoCAD can hold, the table's extension
/// dictionary holds them (written with the objects, [`crate::dxf_layer_states`]).
fn write_layer_table(w: &mut W, d: &Drawing, states: &mut crate::dxf_layer_states::Plan) {
let xdict = (!states.is_empty()).then(|| states.xdict.clone());
let th = table_head_x(w, "LAYER", d.layers.len(), xdict.as_deref());
states.table.clone_from(&th);
fn write_layer_table(w: &mut W, d: &Drawing) {
let th = table_head(w, "LAYER", d.layers.len());
for l in &d.layers {
let lh = record_head(w, "LAYER", &th, "AcDbLayerTableRecord");
w.layers.insert(l.name.to_ascii_uppercase(), lh);
@@ -753,16 +749,6 @@ fn write_objects(w: &mut W, plan: ObjectWritePlan<'_>) {
write_root_group_objects(w, &plan, &groups, &group_owner, &written, &mleader_dict);
write_style_objects(w, &plan, &mleader_dict, &mleader_handles);
write_named_objects(w, &plan);
let layer_states = {
let refs = crate::dxf_layer_states::Refs {
layers: &w.layers,
ltypes: &plan.cx.ltypes,
pstyles: &w.pstyles,
colour_dependent: plan.d.header.i64("PSTYLEMODE", 1) != 0,
};
crate::dxf_layer_states::objects(&plan.cx.layer_states, &plan.d.layer_states, &refs)
};
w.t.extend(layer_states);
write_associative_objects(w, plan.cx);
write_layout_objects(w, &plan);
// Raster image definitions.
@@ -993,9 +979,7 @@ pub(super) fn tags_for(d: &Drawing, version: Version, target: Version, frozen_34
if let Some(chunks) = dxf_ext::constraint_chunks(&d.constraints, &d.parametric) {
xrecords.push((dxf_ext::CONSTRAINTS_KEY, w.h(), chunks));
}
// Saved layer states: AutoCAD's dictionary holds those it can, CADCraft's record the others.
cx.layer_states = crate::dxf_layer_states::Plan::new(&d.layer_states, || w.h());
if let Some(chunks) = dxf_ext::layer_state_chunks(&crate::dxf_layer_states::own(&d.layer_states)) {
if let Some(chunks) = dxf_ext::layer_state_chunks(&d.layer_states) {
xrecords.push((dxf_ext::LAYER_STATES_KEY, w.h(), chunks));
}
if let Some(chunks) = dxf_ext::plot_style_chunks(&d.plot_style_tables) {
@@ -1007,19 +991,14 @@ pub(super) fn tags_for(d: &Drawing, version: Version, target: Version, frozen_34
// The annotation scale list: the ACAD_SCALELIST dictionary of SCALE objects.
let scale_dict = w.h();
let scales: Vec<(&cadcraft_doc::AnnoScale, String)> = d.scales.iter().filter(|s| s.is_valid()).map(|s| (s, w.h())).collect();
// Plot style names used by layers and objects (Normal always), each a placeholder object; in
// a drawing of named plot styles also those of the layers of saved layer states, which name
// theirs by placeholder.
// Plot style names used by layers and objects (Normal always), each a placeholder object.
let pstyle_dict = w.h();
let mut pstyle_names: Vec<String> = vec![cadcraft_doc::NORMAL_STYLE.to_string()];
let mut seen: std::collections::HashSet<String> = pstyle_names.iter().map(|n| n.to_ascii_uppercase()).collect();
let named_styles = d.header.i64("PSTYLEMODE", 1) == 0;
let in_states = d.layer_states.iter().filter(|_| named_styles).flat_map(|s| s.layers.iter());
let named = d.layers.iter().chain(in_states).map(|l| l.plot_style.as_str()).chain(every.iter().map(|e| e.common.plot_style.as_str()));
let named = d.layers.iter().map(|l| l.plot_style.as_str()).chain(every.iter().map(|e| e.common.plot_style.as_str()));
for n in named {
let n = n.trim();
let logical = n.is_empty() || n.eq_ignore_ascii_case("bylayer") || n.eq_ignore_ascii_case("byblock");
if !logical && pstyle_names.len() < dxf_ext::MAX_PLOT_STYLE_NAMES && seen.insert(n.to_ascii_uppercase()) {
if !logical && pstyle_names.len() < dxf_ext::MAX_PLOT_STYLE_NAMES && !pstyle_names.iter().any(|x| x.eq_ignore_ascii_case(n)) {
pstyle_names.push(n.to_string());
}
}
-1
View File
@@ -9,7 +9,6 @@ mod dxf_raw;
mod dxf_clip;
mod dxf_ext;
mod dxf_image;
mod dxf_layer_states;
mod dxf_mleader;
mod dxf_read;
mod dxf_table;
+5 -17
View File
@@ -1856,24 +1856,22 @@ fn layer_states_roundtrip_next_to_constraints() {
description: "walls \\ hidden".into(),
..Layer::default()
});
d.layer_states.push(LayerState::new("Plot", d.layers.clone(), "Wände"));
d.layer_states.push(LayerState { name: "Plot".into(), layers: d.layers.clone() });
let mut off = d.layers.clone();
for l in &mut off {
(l.on, l.frozen, l.locked, l.plot) = (false, true, true, false);
}
d.layer_states.push(LayerState::new("All off", off, ""));
d.layer_states.push(LayerState { name: "All off".into(), layers: off });
let text = write_dxf(&d);
// AutoCAD's dictionary holds both states; CADCraft's record isn't needed.
assert!(text.contains("ACAD_LAYERSTATES") && !text.contains("CADCRAFT_LAYERSTATES"));
assert!(text.contains("CADCRAFT_LAYERSTATES"));
let back = read_dxf(text.as_bytes()).unwrap();
assert_eq!(back.layer_states, d.layer_states);
assert_eq!(back.constraints, constraints);
assert_eq!(roundtrip(&back).layer_states, d.layer_states);
#[cfg(not(target_arch = "wasm32"))]
assert_eq!(read(&write(&d, "x.dwg").unwrap(), "x.dwg").unwrap().layer_states, d.layer_states);
// Drawings without saved layer states carry neither.
let none = write_dxf(&Drawing::new_imperial());
assert!(!none.contains("CADCRAFT_LAYERSTATES") && !none.contains("ACAD_LAYERSTATES"));
// Drawings without saved layer states carry no record.
assert!(!write_dxf(&Drawing::new_imperial()).contains("CADCRAFT_LAYERSTATES"));
}
fn table_sample() -> Table {
@@ -3715,13 +3713,3 @@ fn solid_hatch_keeps_angle_scale_and_double_flag() {
assert!(f("41").is_some_and(|s| (s - 2.0).abs() < 1e-12), "{h:?}");
assert_eq!(group(h, "77"), Some("0"), "{h:?}");
}
/// A layer state of CADCraft's own record from before states had a mask, a current layer and a
/// description (its JSON holds only the name and the layers) restores every property and names no
/// current layer.
#[test]
fn a_layer_state_saved_before_masks_restores_everything() {
let states = crate::dxf_ext::parse_layer_states(r#"{"version":1,"states":[{"name":"S","layers":[]}]}"#).unwrap();
let got: Vec<(&str, u32, &str, &str)> = states.iter().map(|s| (s.name.as_str(), s.mask, s.current.as_str(), s.description.as_str())).collect();
assert_eq!(got, [("S", LayerState::ALL, "", "")]);
}
-451
View File
@@ -1,451 +0,0 @@
//! Saved layer states in AutoCAD's form: the LAYER table's extension dictionary holds an
//! `ACAD_LAYERSTATES` dictionary of one XRECORD per state. The groups below are copied from
//! AutoCAD 2024's own DXFOUT of states saved with -LAYER stAte on a self-built drawing.
use cadcraft_color::{Color, Rgb};
use cadcraft_doc::{Drawing, Layer, LayerState, Lineweight};
use cadcraft_io::{read, write_dxf};
/// `(code, value)` pairs of a DXF, trimmed.
fn pairs(dxf: &str) -> Vec<(String, String)> {
let lines: Vec<&str> = dxf.lines().collect();
lines.chunks(2).filter_map(|c| Some((c.first()?.trim().to_string(), c.get(1)?.trim().to_string()))).collect()
}
fn join(p: &[(String, String)]) -> String {
p.iter().map(|(c, v)| format!("{c}\n{v}\n")).collect()
}
fn g(c: &str, v: &str) -> (String, String) {
(c.to_string(), v.to_string())
}
/// The records of a DXF: (type, groups after the `0`).
fn records(p: &[(String, String)]) -> Vec<(String, Vec<(String, String)>)> {
let mut out: Vec<(String, Vec<(String, String)>)> = Vec::new();
for (c, v) in p {
if c == "0" {
out.push((v.clone(), Vec::new()));
} else if let Some(last) = out.last_mut() {
last.1.push((c.clone(), v.clone()));
}
}
out
}
fn value<'a>(groups: &'a [(String, String)], code: &str) -> Option<&'a str> {
groups.iter().find(|(c, _)| c == code).map(|(_, v)| v.as_str())
}
/// The handle of table record `kind` named `name`.
fn record_handle(p: &[(String, String)], kind: &str, name: &str) -> String {
let recs = records(p);
let (_, groups) = recs.iter().find(|(k, gs)| k == kind && value(gs, "2").is_some_and(|n| n.eq_ignore_ascii_case(name))).unwrap();
value(groups, "5").unwrap().to_string()
}
/// A handle above every handle of the file, plus `k`.
fn fresh(p: &[(String, String)], k: u64) -> String {
let top = p.iter().filter(|(c, _)| c == "5" || c == "105").filter_map(|(_, v)| u64::from_str_radix(v, 16).ok()).max().unwrap();
format!("{:X}", top + 0x100 + k)
}
/// `dxf` with the LAYER table given extension dictionary `xdict` and `objects` added at the end
/// of OBJECTS.
fn inject(dxf: &str, xdict: &str, objects: Vec<(String, String)>) -> String {
let mut p = pairs(dxf);
let table = p.iter().enumerate().position(|(i, (c, v))| c == "0" && v == "TABLE" && p.get(i + 1).is_some_and(|n| n.1 == "LAYER")).unwrap();
let at = table + p[table..].iter().position(|(c, _)| c == "5").unwrap() + 1;
p.splice(at..at, [g("102", "{ACAD_XDICTIONARY"), g("360", xdict), g("102", "}")]);
let objs = p.iter().position(|(c, v)| c == "2" && v == "OBJECTS").unwrap();
let end = objs + p[objs..].iter().position(|(c, v)| c == "0" && v == "ENDSEC").unwrap();
p.splice(end..end, objects);
join(&p)
}
/// Layers A (red) and B, and the DASHED linetype.
fn drawing() -> Drawing {
let mut d = Drawing::new_metric();
d.layers.push(Layer { color: Color::Index(1), ..Layer::new("A") });
d.layers.push(Layer::new("B"));
d.linetypes.push(cadcraft_doc::library::standard_linetypes().into_iter().find(|l| l.name == "DASHED").unwrap());
d
}
/// State S2 as AutoCAD 2024 wrote it after -LAYER: A true colour 10,20,30 (nearest index 168),
/// 50% transparent, 0.35 mm, DASHED, not plotted; B locked and frozen in new viewports. Then the
/// entry of a layer purged since (AutoCAD keeps it, pointing at handles that are gone).
fn s2(p: &[(String, String)], rec: &str, dict: &str) -> Vec<(String, String)> {
let (a, b, zero) = (record_handle(p, "LAYER", "A"), record_handle(p, "LAYER", "B"), record_handle(p, "LAYER", "0"));
let (cont, dashed) = (record_handle(p, "LTYPE", "Continuous"), record_handle(p, "LTYPE", "DASHED"));
let gone = fresh(p, 0x50);
let mut v =
vec![g("0", "XRECORD"), g("5", rec), g("102", "{ACAD_REACTORS"), g("330", dict), g("102", "}"), g("330", dict), g("100", "AcDbXrecord")];
v.extend([g("280", "1"), g("91", "2047"), g("301", ""), g("290", "0"), g("302", "0")]);
for (h, flags, aci, lw, lt, ps, tr) in [
(b.as_str(), "28", "7", "-3", cont.as_str(), "Color_7", "0"),
(a.as_str(), "0", "168", "35", dashed.as_str(), "Color_168", "33554559"),
(zero.as_str(), "8", "7", "-3", cont.as_str(), "Color_7", "0"),
(gone.as_str(), "8", "7", "-3", gone.as_str(), "Color_7", "0"),
] {
v.extend([g("330", h), g("90", flags), g("62", aci), g("370", lw), g("331", lt), g("1", ps), g("440", tr)]);
if h == a {
v.push(g("92", "-1039526882"));
}
}
v
}
/// State S7, saved with only On and restored once (AutoCAD then sets bit 65536), current layer A.
fn s7(p: &[(String, String)], rec: &str, dict: &str) -> Vec<(String, String)> {
let (a, b) = (record_handle(p, "LAYER", "A"), record_handle(p, "LAYER", "B"));
let cont = record_handle(p, "LTYPE", "Continuous");
let mut v =
vec![g("0", "XRECORD"), g("5", rec), g("102", "{ACAD_REACTORS"), g("330", dict), g("102", "}"), g("330", dict), g("100", "AcDbXrecord")];
v.extend([g("280", "1"), g("91", "66049"), g("301", "only on"), g("290", "0"), g("302", "A")]);
for (h, aci) in [(b.as_str(), "7"), (a.as_str(), "1")] {
v.extend([g("330", h), g("90", "8"), g("62", aci), g("370", "-3"), g("331", &cont), g("1", &format!("Color_{aci}")), g("440", "0")]);
}
v
}
/// The extension dictionary of the LAYER table and the states dictionary, with `extra` entries in
/// the extension dictionary.
fn dictionaries(p: &[(String, String)], x: &str, y: &str, states: &[(&str, &str)], extra: &[(&str, &str)]) -> Vec<(String, String)> {
let table = {
let recs = records(p);
let (_, gs) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
value(gs, "5").unwrap().to_string()
};
let mut v = vec![g("0", "DICTIONARY"), g("5", x), g("330", &table), g("100", "AcDbDictionary"), g("280", "1"), g("281", "1")];
for (k, h) in extra.iter().copied().chain([("ACAD_LAYERSTATES", y)]) {
v.extend([g("3", k), g("360", h)]);
}
v.extend([
g("0", "DICTIONARY"),
g("5", y),
g("102", "{ACAD_REACTORS"),
g("330", x),
g("102", "}"),
g("330", x),
g("100", "AcDbDictionary"),
g("281", "1"),
]);
for (name, h) in states {
v.extend([g("3", name), g("350", h)]);
}
v
}
fn autocad_file() -> String {
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, r7) = (h(1), h(2), h(3), h(4));
let mut objects = dictionaries(&p, &x, &y, &[("S2", &r2), ("S7", &r7)], &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &r7, &y));
inject(&base, &x, objects)
}
#[test]
fn reads_the_layer_states_autocad_writes() {
let d = read(autocad_file().as_bytes(), "acad.dxf").unwrap();
let names: Vec<&str> = d.layer_states.iter().map(|s| s.name.as_str()).collect();
assert_eq!(names, ["S2", "S7"]);
let s2 = &d.layer_states[0];
assert_eq!((s2.mask, s2.current.as_str(), s2.description.as_str()), (2047, "0", ""));
// The purged layer's entry is skipped.
let layers: Vec<&str> = s2.layers.iter().map(|l| l.name.as_str()).collect();
assert_eq!(layers, ["B", "A", "0"]);
let a = &s2.layers[1];
assert_eq!(a.color, Color::True(Rgb(10, 20, 30)));
assert_eq!((a.transparency, a.lineweight, a.linetype.as_str()), (50, Lineweight::from_dxf(35), "DASHED"));
assert!(a.on && !a.frozen && !a.locked && !a.plot && !a.vp_freeze_new);
// A colour-dependent drawing: the plot style stays the layer's ("Color_168" is its colour's).
assert_eq!(a.plot_style, "Normal");
let b = &s2.layers[0];
assert!(b.on && !b.frozen && b.locked && b.plot && b.vp_freeze_new, "{b:?}");
assert_eq!((b.color, b.linetype.as_str(), b.transparency), (Color::Index(7), "Continuous", 0));
let s7 = &d.layer_states[1];
assert_eq!((s7.mask, s7.current.as_str(), s7.description.as_str()), (66049, "A", "only on"));
assert_eq!(s7.layers.iter().find(|l| l.name == "A").unwrap().color, Color::Index(1));
}
#[test]
fn autocads_layer_states_are_written_back_in_its_form() {
let d = read(autocad_file().as_bytes(), "acad.dxf").unwrap();
let text = write_dxf(&d);
let p = pairs(&text);
// One states dictionary, in the LAYER table's extension dictionary, and no CADCraft copy.
assert_eq!(p.iter().filter(|(c, v)| c == "3" && v == "ACAD_LAYERSTATES").count(), 1);
assert!(!text.contains("CADCRAFT_LAYERSTATES"));
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let x = table.windows(2).find(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).unwrap();
let (_, xd) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(x.as_str())).unwrap();
assert_eq!(value(xd, "330"), value(table, "5"));
let back = read(text.as_bytes(), "back.dxf").unwrap();
assert_eq!(back.layer_states, d.layer_states);
// The XRECORD of S2 as AutoCAD writes it: B, then A.
let (a_h, b_h) = (record_handle(&p, "LAYER", "A"), record_handle(&p, "LAYER", "B"));
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
let head = rec.iter().position(|(c, _)| c == "280").unwrap();
assert_eq!(rec[head..head + 5], [("280", "1"), ("91", "2047"), ("301", ""), ("290", "0"), ("302", "0")].map(|(c, v)| g(c, v)));
let cont = record_handle(&p, "LTYPE", "Continuous");
let b = [("330", b_h.as_str()), ("90", "28"), ("62", "7"), ("370", "-3"), ("331", &cont), ("1", "Color_7"), ("440", "0")];
assert_eq!(rec[head + 5..head + 12], b.map(|(c, v)| g(c, v)));
let from = rec.iter().position(|(c, v)| c == "330" && *v == a_h).unwrap();
let a: Vec<(String, String)> = rec[from..from + 9].to_vec();
let dashed = record_handle(&p, "LTYPE", "DASHED");
let want = [
("330", a_h.as_str()),
("90", "0"),
("62", "168"),
("370", "35"),
("331", &dashed),
("1", "Color_168"),
("440", "33554559"),
("92", "-1039526882"),
];
assert_eq!(a[..8], want.map(|(c, v)| g(c, v)), "{a:?}");
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "x.dwg").unwrap();
assert_eq!(read(&dwg, "x.dwg").unwrap().layer_states, d.layer_states);
}
}
#[test]
fn layer_filters_next_to_the_states_are_kept() {
// The LAYER table's extension dictionary of a drawing with layer filters holds them next to
// the states (ACAD_LAYERFILTERS, ACLYDICTIONARY): they stay, in the dictionary CADCraft writes.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, f, fr, gone) = (h(1), h(2), h(3), h(4), h(5), h(6));
// Two entries whose objects the file doesn't have (a handle of nothing, and a null one): they
// aren't written into the table's dictionary.
let extra = [("ACAD_LAYERFILTERS", f.as_str()), ("OTHER_GONE", gone.as_str()), ("OTHER_NULL", "0")];
let mut objects = dictionaries(&p, &x, &y, &[("S2", &r2)], &extra);
objects.extend(s2(&p, &r2, &y));
objects.extend([g("0", "DICTIONARY"), g("5", &f), g("102", "{ACAD_REACTORS"), g("330", &x), g("102", "}"), g("330", &x)]);
objects.extend([g("100", "AcDbDictionary"), g("281", "1"), g("3", "Walls"), g("350", &fr)]);
objects.extend([g("0", "XRECORD"), g("5", &fr), g("102", "{ACAD_REACTORS"), g("330", &f), g("102", "}"), g("330", &f), g("100", "AcDbXrecord")]);
objects.extend([g("280", "1"), g("1", "A*")]);
let file = inject(&base, &x, objects);
let mut text = file;
for round in 0..2 {
let d = read(text.as_bytes(), "f.dxf").unwrap();
assert_eq!(d.layer_states.iter().map(|s| s.name.as_str()).collect::<Vec<_>>(), ["S2"], "round {round}");
text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let xdicts: Vec<String> = table.windows(2).filter(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).collect();
assert_eq!(xdicts.len(), 1, "round {round}");
let xd = &xdicts[0];
let (_, dict) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(xd.as_str())).unwrap();
let keys: Vec<&str> = dict.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.as_str()).collect();
assert_eq!(keys, ["ACAD_LAYERSTATES", "ACAD_LAYERFILTERS"], "round {round}");
// The filters dictionary is owned by the written one, and so is its filter by it.
let fh = dict.windows(2).find(|w| w[0] == g("3", "ACAD_LAYERFILTERS")).map(|w| w[1].1.clone()).unwrap();
let (_, fd) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(fh.as_str())).unwrap();
let owner = fd.iter().filter(|(c, _)| c == "330").map(|(_, v)| v.as_str()).collect::<Vec<_>>();
assert_eq!(owner, [xd.as_str(), xd.as_str()], "round {round}: reactor and owner");
let walls = value(fd, "350").unwrap();
let (_, wr) = recs.iter().find(|(k, gs)| k == "XRECORD" && value(gs, "5") == Some(walls)).unwrap();
assert!(wr.contains(&g("330", &fh)) && wr.contains(&g("1", "A*")), "round {round}");
// The kept dictionary itself is not written a second time.
assert_eq!(recs.iter().filter(|(k, gs)| k == "DICTIONARY" && gs.iter().any(|(c, v)| c == "3" && v == "ACAD_LAYERFILTERS")).count(), 1);
}
// With every state deleted the filters stay, in the table's own dictionary, and AutoCAD's states
// don't come back.
let mut d = read(text.as_bytes(), "f.dxf").unwrap();
d.layer_states.clear();
let text = write_dxf(&d);
assert!(!text.contains("ACAD_LAYERSTATES"));
let p = pairs(&text);
let recs = records(&p);
let (_, table) = recs.iter().find(|(k, gs)| k == "TABLE" && value(gs, "2") == Some("LAYER")).unwrap();
let xd = table.windows(2).find(|w| w[0] == g("102", "{ACAD_XDICTIONARY")).map(|w| w[1].1.clone()).unwrap();
let (_, dict) = recs.iter().find(|(k, gs)| k == "DICTIONARY" && value(gs, "5") == Some(xd.as_str())).unwrap();
assert_eq!(dict.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.as_str()).collect::<Vec<_>>(), ["ACAD_LAYERFILTERS"]);
assert!(read(text.as_bytes(), "g.dxf").unwrap().layer_states.is_empty());
}
#[test]
fn entries_whose_names_differ_only_in_case_open_as_one_state() {
// AutoCAD 2024 opens the entries `S` and `s` of one ACAD_LAYERSTATES dictionary as one state:
// named as the first entry in the dictionary and holding the last entry's record (measured with
// the records in one file order and the entries in both dictionary orders, so the first entry's
// record came first in the file once and last once). Here S2's record (mask 2047) comes first in
// the file, then state T's, then S7's (66049); the merged state stays where S2's record is.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r2, r7, rt) = (h(1), h(2), h(3), h(4), h(5));
let states = |d: &Drawing| d.layer_states.iter().map(|s| (s.name.clone(), s.mask)).collect::<Vec<_>>();
for (pair, name, mask) in [([("S", r2.as_str()), ("s", r7.as_str())], "S", 66049), ([("s", r7.as_str()), ("S", r2.as_str())], "s", 2047)] {
let entries = [pair[0], ("T", rt.as_str()), pair[1]];
let mut objects = dictionaries(&p, &x, &y, &entries, &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &rt, &y));
objects.extend(s7(&p, &r7, &y));
let d = read(inject(&base, &x, objects).as_bytes(), "case.dxf").unwrap();
let want = [(name.to_string(), mask), ("T".to_string(), 66049)];
assert_eq!(states(&d), want, "{entries:?}");
// Written back, they are the states AutoCAD opened.
let back = read(write_dxf(&d).as_bytes(), "back.dxf").unwrap();
assert_eq!(states(&back), want, "{entries:?}");
}
// A record the dictionary lists as `s` but another object owns isn't a state, and doesn't stand
// in for S's record either.
let mut objects = dictionaries(&p, &x, &y, &[("S", r2.as_str()), ("s", r7.as_str())], &[]);
objects.extend(s2(&p, &r2, &y));
objects.extend(s7(&p, &r7, &x));
let d = read(inject(&base, &x, objects).as_bytes(), "stray.dxf").unwrap();
assert_eq!(states(&d), [("S".to_string(), 2047)]);
}
#[test]
fn view_snapshots_and_names_twice_in_another_case_stay_in_cadcrafts_record() {
let mut d = drawing();
for name in ["Plan", "*VIEW Front", "PLAN", "Wände", "WÄNDE", "", " "] {
d.layer_states.push(LayerState::new(name, d.layers.clone(), "A"));
}
let text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, states) =
recs.iter().find(|(k, gs)| k == "DICTIONARY" && gs.contains(&g("281", "1")) && gs.iter().any(|(c, v)| c == "3" && v == "Plan")).unwrap();
// (The DXF writes "ä" as \U+00E4.)
let keys: Vec<String> = states.iter().filter(|(c, _)| c == "3").map(|(_, v)| v.replace("\\U+00E4", "ä")).collect();
assert_eq!(keys, ["Plan", "Wände"], "AutoCAD's dictionary holds the first of each name");
assert!(text.contains("CADCRAFT_LAYERSTATES"));
let back = read(text.as_bytes(), "v.dxf").unwrap();
// AutoCAD's states first, then CADCraft's own.
// (A blank name can't be a key of AutoCAD's dictionary: those stay in CADCraft's record too.)
let want: Vec<LayerState> = [0, 3, 1, 2, 4, 5, 6].iter().map(|&i| d.layer_states[i].clone()).collect();
assert_eq!(back.layer_states, want);
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "v.dwg").unwrap();
assert_eq!(read(&dwg, "v.dwg").unwrap().layer_states, want);
}
}
#[test]
fn a_layer_of_an_xref_gets_group_93() {
// AutoCAD 2024 writes 93 (0 for a newly attached xref) after the lineweight of an xref's layer
// only (measured with a self-built xref).
let mut d = drawing();
d.layers.push(Layer::new("XR|L1"));
d.layer_states.push(LayerState::new("X", d.layers.clone(), "0"));
let p = pairs(&write_dxf(&d));
let recs = records(&p);
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
let start = rec.iter().position(|(c, _)| c == "302").unwrap() + 1;
let mut with_93 = Vec::new();
let mut layer = String::new();
for (i, (c, v)) in rec.iter().enumerate().skip(start) {
match c.as_str() {
"330" => layer.clone_from(v),
"93" => {
assert_eq!((v.as_str(), rec[i - 1].0.as_str(), rec[i + 1].0.as_str()), ("0", "370", "331"));
with_93.push(layer.clone());
}
_ => {}
}
}
assert_eq!(with_93, [record_handle(&p, "LAYER", "XR|L1")]);
}
#[test]
fn named_plot_styles_are_written_by_placeholder() {
// In a drawing of named plot styles AutoCAD 2024 writes a layer's plot style as group 390, the
// handle of the style's placeholder object (measured); CADCraft reads it back by that handle.
let mut d = drawing();
d.header.set_i64("PSTYLEMODE", 0);
let a = d.layers.iter().position(|l| l.name == "A").unwrap();
d.layers[a].plot_style = "Thick".into();
d.layer_states.push(LayerState::new("N", d.layers.clone(), "0"));
// No layer uses Thick any more: its placeholder is written for the state.
d.layers[a].plot_style = "Normal".into();
let text = write_dxf(&d);
let p = pairs(&text);
let recs = records(&p);
let (_, names) = recs.iter().find(|(k, _)| k == "ACDBDICTIONARYWDFLT").unwrap();
let thick = names.windows(2).find(|w| w[0] == g("3", "Thick")).map(|w| w[1].1.clone()).unwrap();
let (_, rec) = recs.iter().find(|(k, gs)| k == "XRECORD" && gs.contains(&g("91", "2047"))).unwrap();
assert!(rec.contains(&g("390", &thick)) && !rec.iter().any(|(c, _)| c == "1"), "{rec:?}");
let back = read(text.as_bytes(), "n.dxf").unwrap();
assert_eq!(back.layer_states[0].layers.iter().find(|l| l.name == "A").unwrap().plot_style, "Thick");
assert_eq!(back.layer_states, d.layer_states);
#[cfg(not(target_arch = "wasm32"))]
{
let dwg = cadcraft_io::write(&d, "n.dwg").unwrap();
assert_eq!(read(&dwg, "n.dwg").unwrap().layer_states, d.layer_states);
}
}
#[test]
fn a_state_in_both_records_is_read_from_autocads() {
// A file of an earlier CADCraft keeps its states in CADCraft's record; AutoCAD then saves a state
// of the same name in its own dictionary: AutoCAD's is the one read.
let mut d = drawing();
d.layer_states.push(LayerState::new("S", d.layers.clone(), "A"));
d.layer_states.push(LayerState::new("*VIEW S", d.layers.clone(), "B"));
let text = write_dxf(&d);
assert!(text.contains("*VIEW S"));
let text = text.replace("*VIEW S", "S");
let back = read(text.as_bytes(), "both.dxf").unwrap();
assert_eq!(back.layer_states.iter().map(|s| (s.name.as_str(), s.current.as_str())).collect::<Vec<_>>(), [("S", "A")]);
}
#[test]
fn states_past_the_limit_are_left_out_and_the_rest_come_in_file_order() {
// A hostile file with one state more than the reader keeps (100 000): the last one in the file
// is left out, and the others come in file order, here the reverse of their names' order.
const LIMIT: u64 = 100_000;
let base = write_dxf(&drawing());
let p = pairs(&base);
let first = u64::from_str_radix(&fresh(&p, 0), 16).unwrap();
let h = |k: u64| format!("{:X}", first + k);
let (x, y) = (h(1), h(2));
let names: Vec<String> = (0..=LIMIT).map(|i| format!("S{:06}", LIMIT + 1 - i)).collect();
let records: Vec<String> = (0..=LIMIT).map(|i| h(3 + i)).collect();
let entries: Vec<(&str, &str)> = names.iter().map(String::as_str).zip(records.iter().map(String::as_str)).collect();
let mut objects = dictionaries(&p, &x, &y, &entries, &[]);
for r in &records {
objects.extend([g("0", "XRECORD"), g("5", r), g("330", &y), g("100", "AcDbXrecord")]);
objects.extend([g("280", "1"), g("91", "2047"), g("301", ""), g("290", "0"), g("302", "0")]);
}
let d = read(inject(&base, &x, objects).as_bytes(), "many.dxf").unwrap();
let names: Vec<&str> = d.layer_states.iter().map(|s| s.name.as_str()).collect();
assert_eq!(names.len(), 100_000);
assert_eq!((names.first().copied(), names.get(1).copied(), names.last().copied()), (Some("S100001"), Some("S100000"), Some("S000002")));
}
#[test]
fn a_record_twice_in_a_file_is_one_state() {
// A damaged file can hold an object twice under one handle: one state.
let base = write_dxf(&drawing());
let p = pairs(&base);
let h = |k| fresh(&p, k);
let (x, y, r7) = (h(1), h(2), h(4));
let mut objects = dictionaries(&p, &x, &y, &[("S7", &r7)], &[]);
objects.extend(s7(&p, &r7, &y));
objects.extend(s7(&p, &r7, &y));
let d = read(inject(&base, &x, objects).as_bytes(), "twice.dxf").unwrap();
assert_eq!(d.layer_states.iter().map(|s| s.name.as_str()).collect::<Vec<_>>(), ["S7"]);
}
#[test]
fn group_92_without_the_true_colour_prefix_is_not_a_true_colour() {
// AutoCAD 2024 writes 92 only for a true colour, 0xC2RRGGBB (measured); a value with another
// high byte (not seen from AutoCAD) leaves the colour index of group 62.
let text = autocad_file().replace("92\n-1039526882", "92\n-1023410175");
let d = read(text.as_bytes(), "c3.dxf").unwrap();
assert_eq!(d.layer_states[0].layers.iter().find(|l| l.name == "A").unwrap().color, Color::Index(168));
}
-1
View File
@@ -32,7 +32,6 @@ mod groups_roundtrip;
mod hatch_assoc_roundtrip;
mod hatch_pattern_def;
mod helix_roundtrip;
mod layer_states_acad;
mod layout_limits_roundtrip;
mod layout_paper_units;
mod layout_plot_window;
+1 -1
View File
@@ -185,7 +185,7 @@ pub(super) fn layer_states() -> Case {
layer.on = false;
layer.locked = true;
}
drawing.layer_states.push(LayerState::new("Saved", layers, "0"));
drawing.layer_states.push(LayerState { name: "Saved".into(), layers });
Case { name: "drawing/layer-state".into(), drawing }
}
+5 -15
View File
@@ -492,16 +492,11 @@ const OBJECTS: &str = "
330 61
100 AcDbXrecord
280 1
91 2047
91 0
301 Plan
290 0
302 0
330 11
90 8
8 WALLS
90 0
62 1
370 -3
1 Normal
440 0
0 DICTIONARY
5 63
330 10
@@ -808,19 +803,14 @@ fn ucs_layer_states_and_block_descriptions_are_kept() {
assert_eq!((u.origin.x, u.origin.y, u.origin.z), (1.0, 2.0, 3.0));
assert_eq!((u.x_axis.y, u.y_axis.x), (1.0, -1.0));
assert_eq!(d.block("DOOR").map(|b| b.description.as_str()), Some("A door leaf"));
let states: Vec<(&str, Vec<&str>)> =
d.layer_states.iter().map(|s| (s.name.as_str(), s.layers.iter().map(|l| l.name.as_str()).collect())).collect();
assert_eq!(states, [("Plan", vec!["WALLS"])]);
for o in [&a, &b] {
// Layer states live in the LAYER table's extension dictionary, each layer named by its
// handle (as AutoCAD 2024 writes them; CADCraft reads and rewrites them).
// Layer states live in the LAYER table's extension dictionary.
let table = o.of("TABLE").into_iter().find(|t| s(t, 2) == "LAYER").expect("LAYER table");
let [xd] = group(table, "ACAD_XDICTIONARY").try_into().expect("LAYER table extension dictionary");
let (_, dict) = o.handle(&xd).expect("dictionary");
let (_, states) = o.entry(dict, "ACAD_LAYERSTATES").expect("ACAD_LAYERSTATES");
let (_, plan) = o.entry(states, "Plan").expect("layer state Plan");
let layers = plan.iter().skip_while(|t| t.code != 302).filter(|t| t.code == 330).map(Tag::str).collect::<Vec<_>>();
assert_eq!((s(plan, 301), layers), ("Plan".into(), vec![h(o.named("LAYER", "WALLS"))]));
assert_eq!((s(plan, 301), s(plan, 8)), ("Plan".into(), "WALLS".into()));
}
}
+207 -143
View File
@@ -20,6 +20,7 @@ mod grid;
mod grips;
mod list;
mod pick;
mod press;
mod viewport;
mod widgets;
@@ -164,7 +165,7 @@ pub struct CanvasState {
/// A GRIP edit was running last frame (its grips go cold when it ends).
grip_editing: bool,
/// The grip whose menu (Stretch, Add Vertex, Lengthen…) a right-click opened.
grip_menu: Option<(Handle, usize)>,
pub(crate) grip_menu: Option<(Handle, usize)>,
/// Dynamic block grips of the selection (cached), the one being dragged, and the list grip
/// whose choices are open (and whether it opened this frame).
pub(crate) dyn_grips: crate::dyngrips::Cache,
@@ -181,8 +182,8 @@ pub struct CanvasState {
hover_frozen: Vec<String>,
/// Constraint glyphs for the parametric overlay (cached per drawing revision).
pub param: crate::parametric::Cache,
/// A selection window opened by a press-and-drag, to close where the button is let go.
drag_window: bool,
/// The primary-button press being held, when it was acted on (see [`press`]).
press: Option<press::Press>,
/// The right-click that opened the shortcut menu held Shift or Ctrl: it is the object snap
/// menu ([`crate::context_menu`]).
pub snap_menu: bool,
@@ -513,13 +514,7 @@ fn paint_content_highlights(frame: &mut CanvasPaint<'_>, bg: Rgb, sel: &[Handle]
}
}
fn paint_pointer_overlay(
frame: &mut CanvasPaint<'_>,
paper_rect: Option<Rect>,
surround: Color32,
selecting: bool,
sheet: Option<cadcraft_render::Sheet>,
) {
fn paint_pointer_overlay(frame: &mut CanvasPaint<'_>, paper_rect: Option<Rect>, surround: Color32, sheet: Option<cadcraft_render::Sheet>) {
let app = &mut *frame.app;
let ui = &mut *frame.ui;
let painter = frame.painter;
@@ -563,7 +558,8 @@ fn paint_pointer_overlay(
// Use the painted sheet even in MSPACE, where the editing transform follows a
// model viewport. The whole cursor takes one colour from its centre.
let ink = paper_rect.map_or(t.crosshair, |paper| crate::theme::crosshair_color(if paper.contains(hp) { t.paper } else { surround }));
draw_crosshair(app, painter, rect, hp, selecting, ink);
let picking = app.session.picking_objects() && app.session.pending_window.is_none();
draw_crosshair(app, painter, rect, hp, picking, ink);
if app.canvas.cycle_badge && app.canvas.cycle.is_none() {
cycle_badge(painter, hp);
}
@@ -611,12 +607,12 @@ fn handle_double_click(app: &mut CadApp, ctx: DoubleClickContext<'_>) -> Option<
if !in_active {
app.canvas.hot_grips.clear();
app.session.pending_window = None;
app.canvas.drag_window = false;
app.canvas.press = None;
if app.run("mspace", serde_json::json!({"at": [pp.x, pp.y]})).is_err() && active_viewport.is_some() {
let _ = app.run("pspace", serde_json::json!({}));
}
app.session.pending_window = None;
app.canvas.drag_window = false;
app.canvas.press = None;
app.canvas.list = None;
return None;
}
@@ -657,43 +653,7 @@ fn update_canvas_cursor(
) -> (Option<Vec2>, Option<crate::dyninput::Frame>) {
let raw_world = hover.filter(|_| inside).map(|p| xf.to_world(p));
let dyn_frame = crate::cmdline::dyn_frame(app);
if let Some(w) = raw_world {
let mut eff = effective_point(app, w, xf, ui.ctx());
// A locked Dynamic Input value (`40,` or `40<` typed) holds the cursor and overrides snaps.
if let Some(f) = dyn_frame
&& let Some(e) = crate::dyninput::parse(&app.cmd.buffer, &f)
&& e.first_locked().is_some()
{
eff = crate::dyninput::constrain(&e, &f, eff, app.cmd.second_locked());
app.canvas.snap = None;
app.canvas.track = None;
}
// Grip dimensional input: typed lengths and angles hold the grip and override snaps.
let grip_held = crate::grip_dyn::constrain(app, eff);
if let Some(q) = grip_held {
eff = q;
app.canvas.snap = None;
app.canvas.track = None;
}
app.canvas.cursor = Some(eff);
app.session.cursor = eff;
app.session.cursor_deferred = app.canvas.snap.and_then(|h| h.deferred);
// Typed or menu snap overrides (END, NON…) and Tab cycling; a locked Dynamic Input value wins.
if dyn_frame.and_then(|f| crate::dyninput::parse(&app.cmd.buffer, &f)).is_none_or(|e| e.first_locked().is_none()) {
override_cursor(app, w, xf);
}
// Typed grip dimensions win over snap overrides too.
if let Some(q) = grip_held {
app.canvas.cursor = Some(q);
app.session.cursor = q;
app.canvas.snap = None;
app.session.cursor_deferred = None;
}
} else {
app.canvas.cursor = None;
app.canvas.snap = None;
app.session.cursor_deferred = None;
}
track_cursor(app, raw_world, xf, ui.ctx(), dyn_frame);
(raw_world, dyn_frame)
}
@@ -743,48 +703,91 @@ fn update_hover(app: &mut CadApp, ui: &egui::Ui, inside: bool, hover_pos: Option
}
}
struct PromptClickContext<'a> {
struct PressContext {
rect: Rect,
xf: Xf,
inside: bool,
middle_down: bool,
primary_clicked: bool,
response: &'a egui::Response,
mods: egui::Modifiers,
}
fn collect_prompt_clicks(app: &mut CadApp, ui: &egui::Ui, context: PromptClickContext<'_>) -> bool {
// egui drops a click whose button comes up a few pixels from where it went down (a drag to it),
// and eframe hands a slow frame's clicks over together, which egui reports as one.
let point_prompt = app.session.current_prompt().is_some_and(|p| cadcraft_engine::pointmod::accepts(&p))
&& app.session.pending_window.is_none()
&& !app.session.realtime_zoom_active();
let pressed_primary = context.primary_clicked || (point_prompt && context.response.drag_stopped_by(egui::PointerButton::Primary));
if point_prompt && context.inside && pressed_primary && !context.middle_down && app.cmd.options.is_none() && app.cmd.buffer.is_empty() {
let releases: Vec<egui::Pos2> = ui.input(|i| {
i.events
.iter()
.filter_map(|e| match e {
egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed: false, .. } => Some(*pos),
_ => None,
})
.collect()
});
// The last one is placed below, at the cursor, like any click.
if let Some((_, earlier)) = releases.split_last() {
for pos in earlier.iter().filter(|p| context.rect.contains(**p)) {
let w = effective_point(app, context.xf.to_world(*pos), &context.xf, ui.ctx());
let result = match app.canvas.snap {
Some(hit) => app.session.input_snapped(hit),
None => app.session.input(Input::Point(w)),
};
if let Err(e) = result {
app.session.echo(e.to_string());
/// Clicks count when the button goes down, where it went down, however fast the mouse moves
/// (#1001, #815): each press among this frame's events places its point, picks its object or sets a
/// selection window's corner at once. What the pointer does while the button is held only decides
/// whether the press becomes a drag ([`press`]): a drag closes the window its press opened where
/// the button comes up; after a click the window waits for the next press. A press on a grip
/// (idle) clicks the grip when the button comes up near it, however long it was held (#2813).
/// Presses while ZOOM Realtime runs are left to the clicks in [`show`]. Returns whether a press
/// handled here was released this frame (its click must not count again).
fn handle_presses(app: &mut CadApp, ui: &egui::Ui, context: &PressContext) -> bool {
let PressContext { rect, xf, inside, middle_down, mods } = *context;
let (steps, now, primary_down) = ui.input(|i| (press::steps(&i.events), i.time, i.pointer.primary_down()));
let mut click_used = false;
for step in steps {
match step {
press::Step::Down(pos, m) => {
app.canvas.press = None;
if !inside || !rect.contains(pos) || middle_down {
continue;
}
// A press on the Dynamic Input options menu is the menu's (picked on release);
// elsewhere it closes the menu and counts as usual.
if app.cmd.options.is_some() {
if app.cmd.option_at(pos).is_some() {
continue;
}
app.cmd.options = None;
}
// Selection cycling: the press picks a row of the open list, or opens the list over
// overlapping objects (#1149). Its release must not count again.
if cycle_click(app, &xf, Some(pos), Some(xf.to_world(pos)), m.shift) {
app.canvas.press = Some(press::Press::new(pos, false));
continue;
}
if press_takes(app, &xf, pos) {
let opened = press_at(app, &xf, ui.ctx(), pos, m);
app.canvas.press = Some(press::Press::new(pos, opened));
} else if !app.session.realtime_zoom_active() {
// A grip with no command running: clicked when the button comes up. egui
// calls a press held longer than 0.8 s a drag, and a slow drawing's frames
// can make an ordinary click that long (#2813).
app.canvas.press = Some(press::Press::on_grip(pos, m));
}
}
press::Step::Move(pos) => {
if let Some(p) = &mut app.canvas.press {
p.moved(pos, now);
}
}
press::Step::Up(pos) => {
let Some(mut p) = app.canvas.press.take() else { continue };
click_used = true;
if p.is_on_grip() {
if let Some((at, m)) = p.grip_click(pos) {
if let Some(g) = crate::dyngrips::at(app, &xf, Some(at)) {
crate::dyngrips::click(app, g);
} else if let Some(g) = grip_at(app, &xf, Some(at)) {
click_grip(app, g, m.shift);
}
}
continue;
}
// PICKDRAG off: a window takes two clicks, a drag doesn't close it (#1032).
if app.session.settings.pickdrag && p.released_as_drag(pos, now) && p.opened_window && app.session.pending_window.is_some() {
let end = xf.to_world(pos);
let done = if app.session.prompting() { app.session.input(Input::Point(end)) } else { app.session.idle_click(end, mods.shift) };
if let Err(e) = done {
app.session.echo(e.to_string());
}
}
}
}
}
pressed_primary
if !primary_down {
// The button came up where we didn't see it (outside the window, say).
app.canvas.press = None;
}
click_used
}
/// Whether a quick right-click cancels the running command instead of acting as Enter: it asks for
@@ -872,8 +875,21 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
return;
};
let pressed_primary =
collect_prompt_clicks(app, ui, PromptClickContext { rect, xf, inside, middle_down, primary_clicked: pressed_primary, response: &resp });
// Selection cycling's list closes when the prompt, the drawing or the view changes.
let key: CycleKey = (
app.session.running.as_ref().map(|r| r.id.clone()),
app.session.current_prompt().map(|p| p.message),
app.session.state().map_or(0, |st| st.uid),
app.session.state().map_or(0, |st| st.revision),
xf.center,
xf.scale,
);
if app.canvas.cycle_key.as_ref() != Some(&key) {
app.canvas.cycle = None;
app.canvas.hover_cycle = None;
app.canvas.cycle_key = Some(key);
}
let click_used = handle_presses(app, ui, &PressContext { rect, xf, inside, middle_down, mods });
let (raw_world, dyn_frame) = update_canvas_cursor(app, ui, &xf, inside, hover_pos);
@@ -893,26 +909,14 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
let idle_dbl = dbl_primary && app.session.running.is_none();
if idle_dbl {
app.session.pending_window = None;
app.canvas.drag_window = false;
app.canvas.press = None;
}
let pressed_primary = pressed_primary && !picked && !hatch_dialog && !idle_dbl;
let key: CycleKey = (
app.session.running.as_ref().map(|r| r.id.clone()),
app.session.current_prompt().map(|p| p.message),
app.session.state().map_or(0, |st| st.uid),
app.session.state().map_or(0, |st| st.revision),
xf.center,
xf.scale,
);
if app.canvas.cycle_key.as_ref() != Some(&key) {
app.canvas.cycle = None;
app.canvas.hover_cycle = None;
app.canvas.cycle_key = Some(key);
}
let cycled = pressed_primary && !middle_down && cycle_click(app, &xf, hover_pos, raw_world.filter(|_| inside), mods.shift);
// Clicks.
let cycled = pressed_primary && !click_used && !middle_down && cycle_click(app, &xf, hover_pos, raw_world.filter(|_| inside), mods.shift);
// Clicks the presses above left alone: on grips, and during ZOOM Realtime.
if inside
&& pressed_primary
&& !click_used
&& !middle_down
&& !cycled
&& let Some(p) = app.canvas.cursor
@@ -944,58 +948,31 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
app.session.echo(e.to_string());
}
}
// Press-and-drag selection window (PICKDRAG = 2; click-click still works): a drag
// that starts while objects are being selected opens a window where the button went down,
// and letting go closes it. Drags on grips and drags while drawing are left alone.
if !app.session.settings.pickdrag {
app.canvas.drag_window = false;
}
if app.session.settings.pickdrag
&& resp.drag_started_by(egui::PointerButton::Primary)
&& !middle_down
&& app.canvas.cycle.is_none()
&& app.session.pending_window.is_none()
&& let Some(origin) = ui.input(|i| i.pointer.press_origin())
&& rect.contains(origin)
&& grip_at(app, &xf, Some(origin)).is_none()
&& crate::dyngrips::at(app, &xf, Some(origin)).is_none()
{
app.canvas.drag_window = app.session.begin_window(xf.to_world(origin));
}
if app.canvas.drag_window && resp.drag_stopped_by(egui::PointerButton::Primary) {
app.canvas.drag_window = false;
if app.session.pending_window.is_some()
&& let Some(end) = ui.input(|i| i.pointer.interact_pos())
{
let end = xf.to_world(end);
let done = if app.session.prompting() { app.session.input(Input::Point(end)) } else { app.session.idle_click(end, mods.shift) };
if let Err(e) = done {
app.session.echo(e.to_string());
}
}
}
// Right-click acts as Enter while a command runs (the classic CAD default; held, it opens the
// command menu); otherwise it opens the shortcut menu (Repeat, Clipboard, …).
// Shift/Ctrl+right-click opens the object snap menu.
// A quick right-click is Enter (the classic CAD default): it enters what was typed, ends the
// input of a running command, and between commands repeats the last one. Held, it opens the
// command menu or the shortcut menu (Repeat, Clipboard, …). Shift/Ctrl+right-click opens the
// object snap menu.
let idle = !app.session.prompting();
if inside && pressed_secondary {
app.canvas.snap_menu = mods.shift || mods.ctrl;
}
if crate::context_menu::in_command(app, ui, inside, pressed_secondary) {
if right_click_cancels_placing(app) {
crate::cmdline::escape(app);
} else {
let _ = app.session.input(Input::Enter);
}
}
// Right-click on a grip with options (polyline vertex, line end…) opens the grip menu.
if inside && pressed_secondary && idle && !app.canvas.snap_menu {
app.canvas.grip_menu = grip_at(app, &xf, hover_pos).filter(|g| !grip_options(app, *g).is_empty());
}
let enter = crate::context_menu::in_command(app, ui, inside, pressed_secondary);
if enter {
if right_click_cancels_placing(app) {
crate::cmdline::escape(app);
} else {
// As the Enter key does: what was typed (`rec`, `@10,0`), or Enter when nothing was.
crate::cmdline::submit(app);
}
}
crate::dyngrips::menu(app, ui.ctx(), &xf);
if idle && !app.canvas.snap_menu && app.canvas.grip_menu.is_some() {
grip_menu(app, &resp);
} else if idle || app.canvas.snap_menu {
} else if (idle && !enter) || app.canvas.snap_menu {
crate::context_menu::show(app, &resp);
}
@@ -1021,6 +998,95 @@ pub fn show(app: &mut CadApp, ui: &mut egui::Ui) {
});
}
/// Put the cursor at `raw` (world, `None` off the canvas): snaps, ortho and polar, a locked
/// Dynamic Input value and typed grip dimensions applied (`app.canvas.cursor`, `.snap`, `.track`).
fn track_cursor(app: &mut CadApp, raw: Option<Vec2>, xf: &Xf, ctx: &egui::Context, dyn_frame: Option<crate::dyninput::Frame>) {
if let Some(w) = raw {
let mut eff = effective_point(app, w, xf, ctx);
// A locked Dynamic Input value (`40,` or `40<` typed) holds the cursor and overrides snaps.
if let Some(f) = dyn_frame
&& let Some(e) = crate::dyninput::parse(&app.cmd.buffer, &f)
&& e.first_locked().is_some()
{
eff = crate::dyninput::constrain(&e, &f, eff, app.cmd.second_locked());
app.canvas.snap = None;
app.canvas.track = None;
}
// Grip dimensional input: typed lengths and angles hold the grip and override snaps.
let grip_held = crate::grip_dyn::constrain(app, eff);
if let Some(q) = grip_held {
eff = q;
app.canvas.snap = None;
app.canvas.track = None;
}
app.canvas.cursor = Some(eff);
app.session.cursor = eff;
app.session.cursor_deferred = app.canvas.snap.and_then(|h| h.deferred);
// Typed or menu snap overrides (END, NON…) and Tab cycling; a locked Dynamic Input value wins.
if dyn_frame.and_then(|f| crate::dyninput::parse(&app.cmd.buffer, &f)).is_none_or(|e| e.first_locked().is_none()) {
override_cursor(app, w, xf);
}
// Typed grip dimensions win over snap overrides too.
if let Some(q) = grip_held {
app.canvas.cursor = Some(q);
app.session.cursor = q;
app.canvas.snap = None;
app.session.cursor_deferred = None;
}
} else {
app.canvas.cursor = None;
app.canvas.snap = None;
app.session.cursor_deferred = None;
}
}
/// Whether the press at `pos` is acted on when the button goes down ([`press_at`]): at any prompt
/// and on the drawing with no command running. Grips (with no command running) and ZOOM Realtime
/// keep their clicks.
fn press_takes(app: &mut CadApp, xf: &Xf, pos: Pos2) -> bool {
if app.session.realtime_zoom_active() {
return false;
}
if app.session.prompting() {
return true;
}
crate::dyngrips::at(app, xf, Some(pos)).is_none() && grip_at(app, xf, Some(pos)).is_none()
}
/// Act on a press at `pos`: at a prompt the point goes in (snapped as the cursor would be there);
/// with no command running it picks the object there or sets a selection window's corner.
/// Returns whether the press opened a selection window.
fn press_at(app: &mut CadApp, xf: &Xf, ctx: &egui::Context, pos: Pos2, mods: egui::Modifiers) -> bool {
let had_window = app.session.pending_window.is_some();
let raw = xf.to_world(pos);
let dyn_frame = crate::cmdline::dyn_frame(app);
track_cursor(app, Some(raw), xf, ctx, dyn_frame);
let Some(p) = app.canvas.cursor else { return false };
if app.session.prompting() {
// Ctrl held while picking the point of a grip edit makes copies (the Copy option).
if mods.ctrl && app.session.running.as_ref().is_some_and(|r| r.id == "grip") {
let _ = app.session.input(Input::Keyword("Copy".into()));
}
// Clicking places the point; a value typed into the Dynamic Input boxes is used up.
if let Some(f) = dyn_frame
&& crate::dyninput::parse(&app.cmd.buffer, &f).is_some()
{
app.cmd.buffer.clear();
}
// Preserve a snap's viewport origin for DIST, and its deferred curve where needed.
let result = match app.canvas.snap {
Some(hit) => app.session.input_snapped(hit),
None => app.session.input(Input::Point(p)),
};
if let Err(e) = result {
app.session.echo(e.to_string());
}
} else if let Err(e) = app.session.idle_click(raw, mods.shift) {
app.session.echo(e.to_string());
}
!had_window && app.session.pending_window.is_some()
}
fn paint_canvas(frame: CanvasPaint<'_>) {
let CanvasPaint {
app,
@@ -1041,7 +1107,6 @@ fn paint_canvas(frame: CanvasPaint<'_>) {
raw_world,
} = frame;
let scale = xf.scale;
let selecting = app.session.previews_selection();
painter.rect_filled(rect, 0.0, t.canvas);
let t0 = crate::now_ms();
let mut views = vec![(xf_paper.world_bounds(), 1.0 / xf_paper.scale)];
@@ -1223,7 +1288,6 @@ fn paint_canvas(frame: CanvasPaint<'_>) {
},
paper_rect,
surround,
selecting,
sheet,
);
}
+21 -12
View File
@@ -212,28 +212,37 @@ pub(super) fn override_cursor(app: &mut CadApp, raw: Vec2, xf: &Xf) {
app.session.cursor_deferred = app.canvas.snap.and_then(|h| h.deferred);
}
/// Half the side of the pick box (`PICKBOX * 1.5` screen points), or `None` when `PICKBOX` is 0.
fn pickbox_half(pickbox: f64) -> Option<f32> {
let half = (pickbox * 1.5) as f32;
(half.is_finite() && half >= 1.0).then_some(half)
}
/// Draws the canvas cursor at `at`: the full crosshair with pickbox when idle, crosshair lines
/// only at point prompts, and the pickbox square alone at command object-selection prompts.
pub(super) fn draw_crosshair(app: &CadApp, p: &egui::Painter, rect: Rect, at: Pos2, pickbox: bool, ink: Color32) {
let st = Stroke::new(1.0, ink);
let len = (rect.height() * app.session.settings.cursorsize as f32 / 100.0).max(12.0);
let pb = if pickbox { pickbox_half(app.session.settings.pickbox) } else { None };
let picking_in_cmd = pickbox && app.session.current_prompt().is_some_and(|pr| pr.picks_objects());
let pb = if pickbox { pickbox_half(app.session.settings.pickbox).or(picking_in_cmd.then_some(1.5)) } else { None };
let gap = pb.unwrap_or(0.0);
// Along the isometric plane's axes in isometric drafting.
if app.session.settings.isodraft {
for a in cadcraft_engine::snap::iso::cursor_axes(&app.session.settings) {
let dir = vec2(a.cos() as f32, -(a.sin() as f32));
p.line_segment([at - dir * len, at - dir * gap], st);
p.line_segment([at + dir * gap, at + dir * len], st);
// At a command prompt that selects objects, AutoCAD shows only the pickbox square (no
// crosshair lines); when idle or once a selection window corner is picked, the crosshair
// lines are drawn.
if !picking_in_cmd {
// Along the isometric plane's axes in isometric drafting.
if app.session.settings.isodraft {
for a in cadcraft_engine::snap::iso::cursor_axes(&app.session.settings) {
let dir = vec2(a.cos() as f32, -(a.sin() as f32));
p.line_segment([at - dir * len, at - dir * gap], st);
p.line_segment([at + dir * gap, at + dir * len], st);
}
} else {
p.line_segment([pos2(at.x - len, at.y), pos2(at.x - gap, at.y)], st);
p.line_segment([pos2(at.x + gap, at.y), pos2(at.x + len, at.y)], st);
p.line_segment([pos2(at.x, at.y - len), pos2(at.x, at.y - gap)], st);
p.line_segment([pos2(at.x, at.y + gap), pos2(at.x, at.y + len)], st);
}
} else {
p.line_segment([pos2(at.x - len, at.y), pos2(at.x - gap, at.y)], st);
p.line_segment([pos2(at.x + gap, at.y), pos2(at.x + len, at.y)], st);
p.line_segment([pos2(at.x, at.y - len), pos2(at.x, at.y - gap)], st);
p.line_segment([pos2(at.x, at.y + gap), pos2(at.x, at.y + len)], st);
}
if let Some(pb) = pb {
p.rect_stroke(Rect::from_center_size(at, vec2(pb * 2.0, pb * 2.0)), 0.0, st, egui::StrokeKind::Middle);
+167
View File
@@ -0,0 +1,167 @@
//! Press-first clicks (#1001): a click on the canvas counts when the primary button goes down, at
//! the spot where it went down, however fast the mouse is moving. Where the pointer goes while the
//! button is held only decides whether the press also becomes a drag:
//!
//! - holding still, or staying within [`TOLERANCE`] of the press, never makes a drag;
//! - once the pointer leaves the tolerance a timer starts; a button still down [`DRAG_DELAY`]
//! later is a drag (a selection window the press opened closes where the button comes up);
//! - a button that comes up sooner was a click (the window waits for the next press).
//!
//! The timer starts on leaving the tolerance, not on the press: pressing, holding still and then
//! moving and letting go quickly is still a click, as in AutoCAD.
//!
//! A press on a grip with no command running ([`Press::on_grip`]) is the exception: the grip is
//! clicked when the button comes up within [`TOLERANCE`] of the press, however long it was held
//! (#2813), and a drag from it does nothing.
use egui::{Modifiers, Pos2};
/// How far (points) the pointer may wander from the press before the timer starts.
pub(crate) const TOLERANCE: f32 = 6.0;
/// How long (seconds) the button must stay down after the pointer left [`TOLERANCE`] for the
/// press to be a drag.
pub(crate) const DRAG_DELAY: f64 = 0.25;
/// A primary-button press being held.
#[derive(Clone, Copy, Debug)]
pub(crate) struct Press {
origin: Pos2,
/// When the pointer first went further than [`TOLERANCE`] from `origin` (seconds).
left_at: Option<f64>,
/// The press opened a selection window (set its first corner).
pub(crate) opened_window: bool,
/// The press went down on a grip with no command running, with these modifiers: it is a click
/// on the grip if the button comes up near it ([`Self::grip_click`]).
on_grip: Option<Modifiers>,
}
impl Press {
pub(crate) fn new(origin: Pos2, opened_window: bool) -> Self {
Self { origin, left_at: None, opened_window, on_grip: None }
}
/// A press on a grip with no command running, acted on when the button comes up.
pub(crate) fn on_grip(origin: Pos2, modifiers: Modifiers) -> Self {
Self { origin, left_at: None, opened_window: false, on_grip: Some(modifiers) }
}
/// For a press on a grip ([`Self::on_grip`]) whose button came up at `pos`: `Some` (where it
/// went down, the modifiers then) when that is a click on the grip, within [`TOLERANCE`] of the
/// press however long the button was held; `None` for a drag from it or a press elsewhere.
pub(crate) fn grip_click(&self, pos: Pos2) -> Option<(Pos2, Modifiers)> {
let modifiers = self.on_grip?;
(pos.distance(self.origin) <= TOLERANCE).then_some((self.origin, modifiers))
}
/// Whether the press went down on a grip ([`Self::on_grip`]).
pub(crate) fn is_on_grip(&self) -> bool {
self.on_grip.is_some()
}
/// The pointer is at `pos` at time `now`.
pub(crate) fn moved(&mut self, pos: Pos2, now: f64) {
if self.left_at.is_none() && pos.distance(self.origin) > TOLERANCE {
self.left_at = Some(now);
}
}
/// Whether the button coming up at `pos` at time `now` ends a drag rather than a click.
pub(crate) fn released_as_drag(&mut self, pos: Pos2, now: f64) -> bool {
self.moved(pos, now);
self.left_at.is_some_and(|t| now - t >= DRAG_DELAY)
}
}
/// A primary-button event of the frame, in order.
#[derive(Clone, Copy, Debug, PartialEq)]
pub(crate) enum Step {
Down(Pos2, Modifiers),
Move(Pos2),
Up(Pos2),
}
/// The primary-button presses, pointer moves and releases among a frame's events, in order. A slow
/// frame can hold several clicks; each press is its own step (#815).
pub(crate) fn steps(events: &[egui::Event]) -> Vec<Step> {
events
.iter()
.filter_map(|e| match *e {
egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed: true, modifiers } => Some(Step::Down(pos, modifiers)),
egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed: false, .. } => Some(Step::Up(pos)),
egui::Event::PointerMoved(pos) => Some(Step::Move(pos)),
_ => None,
})
.collect()
}
#[cfg(test)]
mod tests {
use super::*;
use egui::pos2;
#[test]
fn staying_within_the_tolerance_is_a_click_however_long_the_button_is_held() {
let mut p = Press::new(pos2(100.0, 100.0), true);
p.moved(pos2(104.0, 103.0), 0.5);
assert!(!p.released_as_drag(pos2(105.0, 100.0), 5.0));
}
#[test]
fn letting_go_soon_after_leaving_the_tolerance_is_a_click() {
let mut p = Press::new(pos2(100.0, 100.0), true);
p.moved(pos2(112.0, 100.0), 1.0);
assert!(!p.released_as_drag(pos2(130.0, 100.0), 1.0 + DRAG_DELAY / 2.0));
}
#[test]
fn holding_still_then_moving_and_letting_go_quickly_is_a_click() {
// The timer starts when the pointer leaves the tolerance, not when the button goes down.
let mut p = Press::new(pos2(100.0, 100.0), true);
p.moved(pos2(101.0, 100.0), 2.0);
assert!(!p.released_as_drag(pos2(140.0, 100.0), 2.05));
}
#[test]
fn a_button_still_down_after_the_delay_is_a_drag() {
let mut p = Press::new(pos2(100.0, 100.0), true);
p.moved(pos2(110.0, 100.0), 1.0);
p.moved(pos2(200.0, 150.0), 1.1);
assert!(p.released_as_drag(pos2(250.0, 160.0), 1.0 + DRAG_DELAY));
}
#[test]
fn a_grip_press_is_a_click_where_it_went_down_only_when_let_go_near_it() {
let p = Press::on_grip(pos2(100.0, 100.0), Modifiers::SHIFT);
assert!(p.is_on_grip());
assert_eq!(p.grip_click(pos2(103.0, 104.0)), Some((pos2(100.0, 100.0), Modifiers::SHIFT)));
assert_eq!(p.grip_click(pos2(120.0, 100.0)), None, "a drag from the grip is no click");
let elsewhere = Press::new(pos2(100.0, 100.0), false);
assert!(!elsewhere.is_on_grip());
assert_eq!(elsewhere.grip_click(pos2(100.0, 100.0)), None);
}
#[test]
fn steps_keep_every_press_of_a_slow_frame_in_order() {
let at = |x| pos2(x, 10.0);
let button =
|x, pressed| egui::Event::PointerButton { pos: at(x), button: egui::PointerButton::Primary, pressed, modifiers: Modifiers::NONE };
let events = vec![
egui::Event::PointerMoved(at(1.0)),
button(1.0, true),
button(1.0, false),
egui::Event::PointerButton { pos: at(2.0), button: egui::PointerButton::Secondary, pressed: true, modifiers: Modifiers::NONE },
button(3.0, true),
button(3.0, false),
];
assert_eq!(
steps(&events),
vec![
Step::Move(at(1.0)),
Step::Down(at(1.0), Modifiers::NONE),
Step::Up(at(1.0)),
Step::Down(at(3.0), Modifiers::NONE),
Step::Up(at(3.0))
]
);
}
}
+60
View File
@@ -249,6 +249,66 @@ fn clicking_a_hot_grip_leaves_hidden_objects_out_of_the_stretch() {
assert_eq!(app.canvas.hot_grips, vec![(shown, 0)], "the hidden object's grip must leave the hot set");
}
/// Verifies that command object-selection prompts draw only the pickbox square while idle and
/// point prompts draw the crosshair lines.
#[test]
fn cursor_shows_pickbox_only_at_command_object_selection_prompts() {
let mut app = CadApp::new(cadcraft_engine::Session::new(), crate::Services::default());
let rect = Rect::from_min_size(Pos2::ZERO, vec2(800.0, 600.0));
let at = pos2(400.0, 300.0);
let paint = |app: &CadApp| {
let ctx = egui::Context::default();
let mut out = ctx.run_ui(egui::RawInput::default(), |ui| {
let painter = ui.painter_at(rect);
let picking = app.session.picking_objects() && app.session.pending_window.is_none();
draw_crosshair(app, &painter, rect, at, picking, Color32::WHITE);
});
out.textures_delta.clear();
let mut lines = 0usize;
let mut rects = 0usize;
for clipped in &out.shapes {
match &clipped.shape {
Shape::LineSegment { .. } => lines += 1,
Shape::Rect(r) if r.rect.center() == at => rects += 1,
_ => {}
}
}
(lines, rects)
};
// 1. Idle with PICKFIRST on: crosshair lines (4 segments) + pickbox square (1 rect).
assert_eq!(paint(&app), (4, 1), "idle with PICKFIRST on");
// 2. Idle with SELECTIONPREVIEW = 0: pickbox still drawn while PICKFIRST is on.
app.session.settings.selectionpreview = 0;
assert_eq!(paint(&app), (4, 1), "idle with SELECTIONPREVIEW = 0");
app.session.settings.selectionpreview = 3;
// 3. Command asking for points (LINE): crosshair lines only (4 segments, 0 rects).
app.session.cmdline("line").unwrap();
assert_eq!(paint(&app), (4, 0), "point prompt (LINE)");
app.session.cancel();
// 4. Command asking to select objects (ERASE): pickbox square only (0 segments, 1 rect).
app.session.cmdline("erase").unwrap();
assert_eq!(paint(&app), (0, 1), "object selection prompt (ERASE)");
// 5. Even when PICKBOX = 0, a command object-selection prompt keeps a minimal visible pickbox.
app.session.settings.pickbox = 0.0;
assert_eq!(paint(&app), (0, 1), "object selection prompt with PICKBOX = 0");
app.session.settings.pickbox = 3.0;
// 6. While picking the second corner of a selection window, the crosshair lines return.
app.session.pending_window = Some(cadcraft_engine::PendingWindow { corner: Vec2::ZERO, during_command: true });
assert_eq!(paint(&app), (4, 0), "selection window second corner");
app.session.pending_window = None;
app.session.cancel();
// 7. STRETCH's "Remove objects" prompt also draws the pickbox-only cursor.
app.session.cmdline("stretch r").unwrap();
assert_eq!(paint(&app), (0, 1), "STRETCH Remove objects prompt");
}
/// Makes the layer "Hidden" and, on Layout1, two viewports over the model: the first freezes
/// "Hidden", the second freezes nothing. The app is left in paper space.
fn viewports_freezing_hidden(app: &mut CadApp) -> (String, String) {
+26 -14
View File
@@ -1,6 +1,7 @@
//! The canvas's right-click menus, after AutoCAD's shortcut menus:
//!
//! - **No command running** ([`entries`]): Repeat the last command, Recent Commands, the
//! - **No command running** ([`entries`], opened by holding the button: a quick right-click is
//! Enter, which repeats the last command): Repeat the last command, Recent Commands, the
//! Clipboard and Isolate; with a selection the editing commands, Draw Order, Group, the edit
//! commands of the selected object type, Select Similar and Deselect All; then Undo/Redo,
//! Pan/Zoom, Quick Select, Find, Properties and Options.
@@ -10,8 +11,8 @@
//! Preferences ▸ Right-Click Customization sets how long, `rightClickDuration`). With that turned
//! off (`timeSensitiveRightClick`), Command mode says what a right-click does
//! (`rightClickCommand`: the menu, Enter, or the menu only when the prompt has options).
//! `rightClickDefault` and `rightClickEdit` can make a right-click with no command running
//! repeat the last command instead of opening the menu.
//! With it off, `rightClickDefault` and `rightClickEdit` can make a right-click with no command
//! running repeat the last command instead of opening the menu.
//! - **Shift/Ctrl+right-click** ([`snap_entries`]): the object snap menu. Its items type the point
//! modifiers and snap overrides (`_from`, `_endp`, `_non`…) at the current point prompt.
//!
@@ -387,13 +388,16 @@ pub fn groups_ui(ui: &mut egui::Ui, groups: &[Vec<Entry>], clicked: &mut Option<
pub fn show(app: &mut CadApp, resp: &egui::Response) {
let mut clicked = None;
let snap = app.canvas.snap_menu;
// Right-Click Customization: with nothing selected (Default mode) or a selection (Edit mode),
// a right-click may repeat the last command instead of opening the menu. With no last command
// yet, it opens the menu.
// Right-Click Customization: with the time-sensitive right-click off and nothing selected
// (Default mode) or a selection (Edit mode), a right-click may repeat the last command instead
// of opening the menu. With no last command yet, it opens the menu. With the time-sensitive
// right-click on, a quick click is already Enter ([`in_command`]) and a longer one is this
// menu, as in AutoCAD.
let o = &app.options;
let mode =
if o.right_click_default == o.right_click_edit || app.session.selection().is_empty() { o.right_click_default } else { o.right_click_edit };
if !snap
&& !o.time_sensitive_right_click
&& mode == crate::options::IdleClick::Repeat
&& let Some(last) = app.session.last_command.clone()
{
@@ -417,13 +421,15 @@ pub fn show(app: &mut CadApp, resp: &egui::Response) {
#[derive(Clone, Copy, Default)]
struct Press(f64, egui::Pos2);
/// The canvas's right button while a command runs (Shift/Ctrl+right-click is the snap menu's): a
/// quick click is Enter — returns `true` when the caller should send it — and a click held for
/// OPTIONS `rightClickDuration` opens the command menu ([`command_entries`]) at the pointer. With
/// the time-sensitive right-click turned off, `rightClickCommand` says whether a click opens the
/// menu or is Enter. Call it every frame
/// with whether the pointer is on the canvas and whether a right-click ended there; it also shows
/// the menu while it is open.
/// The canvas's right button (Shift/Ctrl+right-click is the snap menu's). With the time-sensitive
/// right-click on, a quick click is Enter — returns `true` when the caller should send it; between
/// commands that runs what was typed or repeats the last command — and while a command runs a
/// click held for OPTIONS `rightClickDuration` opens the command menu ([`command_entries`]) at the
/// pointer (between commands a held click is left to the caller's shortcut menu). With it turned
/// off, `rightClickCommand` says whether a click while a command runs opens the menu or is Enter,
/// and between commands the caller follows `rightClickDefault` and `rightClickEdit`. Call it every
/// frame with whether the pointer is on the canvas and whether a right-click ended there; it also
/// shows the menu while it is open.
pub fn in_command(app: &mut CadApp, ui: &egui::Ui, inside: bool, right_clicked: bool) -> bool {
let ctx = ui.ctx().clone();
let press_id = egui::Id::unique("cc_command_menu_press");
@@ -448,15 +454,21 @@ pub fn in_command(app: &mut CadApp, ui: &egui::Ui, inside: bool, right_clicked:
};
let hold = f64::from(o.right_click_hold_ms) / 1000.0;
let mut open = false;
let mut quick = false;
if released && let Some(Press(t0, p0)) = ctx.data_mut(|d| d.remove_temp::<Press>(press_id)) {
// A drag isn't a click; a click held long enough asks for the menu.
let still = pos.is_some_and(|p| p.distance(p0) <= 6.0);
let held = if timed { now - t0 >= hold } else { menu };
open = running && still && held;
quick = !held;
}
let enter = running && inside && right_clicked && !open && (timed || !menu);
if !running {
return false;
// Between commands a quick click is Enter too (as in AutoCAD): it runs the typed command,
// or repeats the last one; held, it opens the shortcut menu. A grip with options keeps
// its menu.
let something = !app.cmd.buffer.trim().is_empty() || app.session.last_command.is_some();
return timed && quick && inside && right_clicked && !app.canvas.snap_menu && app.canvas.grip_menu.is_none() && something;
}
let mut clicked = None;
let popup = egui::Popup::new(popup_id, ctx, egui::PopupAnchor::PointerFixed, ui.layer_id())
+8 -5
View File
@@ -16,9 +16,9 @@
//! | `SAVETIME` | minutes between automatic saves, 0–600 (0: off) |
//! | `SAVEFILEPATH` | the folder automatic saves go to |
//! | `ISAVEBAK` | 1: saving over a drawing keeps the previous file as `<name>.bak` (default); 0: no backup |
//! | `timeSensitiveRightClick` | while a command runs, a quick right-click is Enter and holding the button opens the shortcut menu (default); `false`: `rightClickCommand` decides |
//! | `timeSensitiveRightClick` | a quick right-click is Enter (between commands it runs what was typed, or repeats the last command) and holding the button opens the shortcut menu (default); `false`: `rightClickCommand` decides while a command runs, `rightClickDefault` and `rightClickEdit` between commands |
//! | `rightClickDuration` | how long the right button is held to open the menu while a command runs, 100–2000 ms (250) |
//! | `rightClickDefault`, `rightClickEdit` | a right-click with no command running and nothing (`Default`) or something (`Edit`) selected: `"menu"` (the shortcut menu, default) or `"repeat"` (the last command) |
//! | `rightClickDefault`, `rightClickEdit` | with the time-sensitive right-click off, a right-click with no command running and nothing (`Default`) or something (`Edit`) selected: `"menu"` (the shortcut menu, default) or `"repeat"` (the last command) |
//! | `rightClickCommand` | a right-click while a command runs, with the time-sensitive right-click off: `"menu"` (default), `"enter"`, or `"menuWithOptions"` (the menu when the prompt has options, else Enter) |
//! | `systemCursor` | keep the system cursor visible over the drawing area |
//! | `historyLines` | command-line history lines, 0–12 |
@@ -139,13 +139,16 @@ pub struct UiOptions {
pub snap_marker_size: f32,
/// The selection highlight colour; `None` keeps the theme's.
pub selection_color: Option<Color32>,
/// While a command runs: a quick right-click is Enter and a held one opens the shortcut menu
/// (AutoCAD's time-sensitive right-click). Off: [`Self::right_click_command`] decides.
/// A quick right-click is Enter and a held one opens the shortcut menu (AutoCAD's
/// time-sensitive right-click). Between commands that Enter runs what was typed, or repeats
/// the last command; with neither, the click opens the shortcut menu. Off:
/// [`Self::right_click_command`] decides while a command runs, and [`Self::right_click_default`]
/// and [`Self::right_click_edit`] between commands.
pub time_sensitive_right_click: bool,
/// How long the right button is held to open the menu while a command runs, in milliseconds.
pub right_click_hold_ms: u32,
/// A right-click with no command running and nothing selected (Default mode) or a selection
/// (Edit mode).
/// (Edit mode), with the time-sensitive right-click off.
pub right_click_default: IdleClick,
pub right_click_edit: IdleClick,
/// A right-click while a command runs, with the time-sensitive right-click off.
+26 -14
View File
@@ -615,23 +615,35 @@ fn right_click_window(o: &super::UiOptions, ctx: &egui::Context, open: &mut bool
ui.label(crate::tl!("milliseconds"));
});
hint(ui, crate::tl!("While a command runs, a quick click is Enter and a longer click opens the shortcut menu."));
hint(ui, crate::tl!("With no command running, a quick click repeats the last command or runs what was typed."));
});
ui.add_space(6.0);
for (title, note, key, current) in [
(crate::tl!("Default Mode"), crate::tl!("No objects selected and no command running:"), "rightClickDefault", o.right_click_default),
(crate::tl!("Edit Mode"), crate::tl!("Objects selected and no command running:"), "rightClickEdit", o.right_click_edit),
] {
heading(ui, title);
ui.group(|ui| {
ui.set_width(ui.available_width());
hint(ui, note);
for (choice, label) in [(IdleClick::Repeat, crate::tl!("Repeat last command")), (IdleClick::Menu, crate::tl!("Shortcut Menu"))] {
if ui.radio(current == choice, label).clicked() && current != choice {
changes.insert(key.into(), json!(choice.as_str()));
// Like Command mode, Default and Edit modes decide only with the time-sensitive
// right-click off: with it on, a quick click is Enter and a longer one the menu.
ui.add_enabled_ui(!o.time_sensitive_right_click, |ui| {
for (title, note, key, current) in [
(
crate::tl!("Default Mode"),
crate::tl!("No objects selected and no command running:"),
"rightClickDefault",
o.right_click_default,
),
(crate::tl!("Edit Mode"), crate::tl!("Objects selected and no command running:"), "rightClickEdit", o.right_click_edit),
] {
heading(ui, title);
ui.group(|ui| {
ui.set_width(ui.available_width());
hint(ui, note);
for (choice, label) in
[(IdleClick::Repeat, crate::tl!("Repeat last command")), (IdleClick::Menu, crate::tl!("Shortcut Menu"))]
{
if ui.radio(current == choice, label).clicked() && current != choice {
changes.insert(key.into(), json!(choice.as_str()));
}
}
}
});
}
});
}
});
ui.add_enabled_ui(!o.time_sensitive_right_click, |ui| {
heading(ui, crate::tl!("Command Mode"));
ui.group(|ui| {
+38
View File
@@ -240,4 +240,42 @@ fn time_sensitive_right_click() {
painted(&mut app, &ctx, Vec::new(), 3.1);
assert!(app.session.running.is_none(), "a quick right-click is Enter: {}", app.session.prompt_text());
assert_eq!(app.session.doc().unwrap().model.handles().len(), 1);
// Between commands a quick right-click is Enter too: it repeats LINE (it opened the shortcut
// menu instead).
painted(&mut app, &ctx, vec![quick(true)], 4.0);
painted(&mut app, &ctx, vec![quick(false)], 4.05);
let text = painted(&mut app, &ctx, Vec::new(), 4.1);
assert!(app.session.running.is_some(), "a quick right-click repeats LINE: {}", app.session.prompt_text());
assert!(!text.contains("Repeat LINE"), "no shortcut menu on a quick click:\n{text}");
app.session.input(cadcraft_engine::Input::Cancel).unwrap();
// Held, it opens the shortcut menu and repeats nothing.
painted(&mut app, &ctx, vec![quick(true)], 5.0);
painted(&mut app, &ctx, Vec::new(), 5.2);
painted(&mut app, &ctx, vec![quick(false)], 5.0 + context_menu::HOLD_SECS + 0.1);
let text = painted(&mut app, &ctx, Vec::new(), 5.5);
assert!(text.contains("Repeat LINE"), "Repeat LINE missing from the painted menu:\n{text}");
assert!(app.session.running.is_none(), "held, no repeat: {}", app.session.prompt_text());
// A quick click enters what was typed, as the Enter key does (#1387): a command name between
// commands (not a repeat of LINE)…
painted(
&mut app,
&ctx,
vec![egui::Event::Key { key: egui::Key::Escape, physical_key: None, pressed: true, repeat: false, modifiers: egui::Modifiers::NONE }],
5.6,
);
// The menu closes on the frame after Escape.
painted(&mut app, &ctx, Vec::new(), 5.7);
app.cmd.buffer = "circle".into();
painted(&mut app, &ctx, vec![quick(true)], 6.0);
painted(&mut app, &ctx, vec![quick(false)], 6.05);
painted(&mut app, &ctx, Vec::new(), 6.1);
assert!(app.session.prompt_text().contains("center point"), "the typed CIRCLE starts: {}", app.session.prompt_text());
// …and a point while a command runs.
app.cmd.buffer = "5,5".into();
painted(&mut app, &ctx, vec![quick(true)], 7.0);
painted(&mut app, &ctx, vec![quick(false)], 7.05);
painted(&mut app, &ctx, Vec::new(), 7.1);
assert!(app.session.prompt_text().contains("radius"), "the typed center is entered: {}", app.session.prompt_text());
}
+4
View File
@@ -21,6 +21,7 @@ mod instant_modals;
mod lisp_files;
mod measure_distance_snapping;
mod menubar_hover;
mod moving_clicks;
mod mspace_viewport_view;
mod named_viewports_dialog;
mod native_menu_text_keys;
@@ -29,6 +30,7 @@ mod options_dialog;
mod options_right_click;
mod parameters_rename;
mod pickdrag;
mod press_first_clicks;
mod properties_described;
mod properties_units;
mod rapid_clicks;
@@ -36,6 +38,8 @@ mod selection_cycling;
mod shared_controls;
mod shortcut_menus;
mod shortcuts_checked;
mod slow_clicks;
mod space_at_options;
mod status_bar_toggles;
mod style_dialogs;
mod system_cursor;
+183
View File
@@ -0,0 +1,183 @@
//! A click made while the mouse moves counts where the button went down, in the commands #1001
//! names (STRETCH, MOVE, TRIM), with no command running, with PICKDRAG off, at a click-click
//! window's second corner and over overlapping objects (selection cycling).
use cadcraft_engine::Session;
use cadcraft_engine::doc::{Drawing, EntityKind, Space};
use cadcraft_engine::geom::Vec2;
use cadcraft_ui_egui::{CadApp, Services};
use egui::{Event, Modifiers, PointerButton, Pos2, vec2};
use egui_kittest::Harness;
use serde_json::json;
fn screen(h: &Harness<'_, CadApp>, p: Vec2) -> Pos2 {
h.state().canvas.xf.unwrap().to_screen(p)
}
fn button(h: &mut Harness<'_, CadApp>, pos: Pos2, pressed: bool) {
h.event(Event::PointerMoved(pos));
h.event(Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE });
}
fn lines(h: &Harness<'_, CadApp>) -> Vec<(Vec2, Vec2)> {
let st = h.state().session.state().unwrap();
st.doc
.space(&Space::Model)
.unwrap()
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Line(l) => Some((l.a.xy(), l.b.xy())),
_ => None,
})
.collect()
}
/// A harness at 60 frames a second, with two lines to select: a horizontal one through (20, 50)
/// and (40, 50), and a vertical one at x = 80.
fn select_harness() -> Harness<'static, CadApp> {
let mut session = Session::empty();
session.open_drawing(Drawing::new_imperial(), "Moving clicks", None);
session.execute("view.set", &json!({"center":[50,50],"height":100})).unwrap();
session.settings.osmode = 0;
session.execute("line", &json!({"points": [[20, 50], [40, 50]]})).unwrap();
session.execute("line", &json!({"points": [[80, 30], [80, 70]]})).unwrap();
let mut app = CadApp::new(session, Services::default());
app.canvas.zoom_pending = false;
let mut h = Harness::builder().with_size(vec2(1600.0, 1000.0)).with_step_dt(1.0 / 60.0).build_ui_state(
|ui, app: &mut CadApp| {
app.logic(ui.ctx());
app.ui(ui);
},
app,
);
h.run_steps(5);
h
}
/// Press at `down`, move on (the hand is already going somewhere) and let go at `up`, `frames`
/// frames later.
fn press_moving(h: &mut Harness<'_, CadApp>, down: Vec2, up: Vec2, frames: usize) {
let (d, u) = (screen(h, down), screen(h, up));
button(h, d, true);
h.run_steps(1);
for i in 1..=frames {
let t = i as f32 / frames as f32;
h.event(Event::PointerMoved(d + (u - d) * t));
h.run_steps(1);
}
button(h, u, false);
h.run_steps(2);
}
fn handles(h: &Harness<'_, CadApp>) -> Vec<cadcraft_engine::doc::Handle> {
let st = h.state().session.state().unwrap();
st.doc.space(&Space::Model).unwrap().iter().map(|e| e.handle).collect()
}
/// #1001: in STRETCH (whose "Select objects" takes points), a click made while the mouse moves
/// picks the object where the button went down; on empty space it starts STRETCH's window.
#[test]
fn a_click_made_while_moving_selects_in_stretch() {
let mut h = select_harness();
let ids = handles(&h);
h.state_mut().start("stretch");
h.run_steps(2);
// Down on the horizontal line, up a few units off it, a few frames later.
press_moving(&mut h, Vec2::new(30.0, 50.0), Vec2::new(32.0, 54.0), 4);
assert_eq!(h.state().session.selection(), vec![ids[0]], "the line under the button is picked");
// Down on empty space while moving: the window starts where the button went down.
press_moving(&mut h, Vec2::new(70.0, 20.0), Vec2::new(72.0, 22.0), 4);
assert_eq!(h.state().session.current_prompt().unwrap().message, "Specify opposite corner");
let corner = screen(&h, Vec2::new(90.0, 80.0));
button(&mut h, corner, true);
h.run_steps(1);
button(&mut h, corner, false);
h.run_steps(2);
assert_eq!(h.state().session.selection(), vec![ids[0], ids[1]], "the window took the vertical line");
}
/// At a generic "Select objects" (MOVE), a moving click picks the object where the button went
/// down instead of closing a tiny window; a slow press-and-drag is still a window.
#[test]
fn a_click_made_while_moving_selects_in_move_and_a_slow_drag_is_a_window() {
let mut h = select_harness();
let ids = handles(&h);
h.state_mut().start("move");
h.run_steps(2);
press_moving(&mut h, Vec2::new(30.0, 50.0), Vec2::new(32.0, 54.0), 4);
assert_eq!(h.state().session.selection(), vec![ids[0]]);
assert!(h.state().session.pending_window.is_none());
// Half a second from (70, 20) to (90, 80): a window around the vertical line.
press_moving(&mut h, Vec2::new(70.0, 20.0), Vec2::new(90.0, 80.0), 30);
assert!(h.state().session.pending_window.is_none(), "closed where the drag ended");
assert_eq!(h.state().session.selection(), vec![ids[0], ids[1]]);
}
/// With no command running, the same moving click picks the object.
#[test]
fn a_click_made_while_moving_picks_with_no_command() {
let mut h = select_harness();
let ids = handles(&h);
press_moving(&mut h, Vec2::new(80.0, 40.0), Vec2::new(83.0, 41.0), 4);
assert_eq!(h.state().session.selection(), vec![ids[1]]);
}
/// A click-click window already open: its second corner, clicked while moving, closes it where the
/// button went down instead of being lost to the drag egui saw.
#[test]
fn a_click_made_while_moving_closes_a_click_click_window() {
let mut h = select_harness();
let ids = handles(&h);
let corner = screen(&h, Vec2::new(70.0, 20.0));
button(&mut h, corner, true);
h.run_steps(1);
button(&mut h, corner, false);
h.run_steps(2);
assert!(h.state().session.pending_window.is_some(), "the click on empty space opened a window");
press_moving(&mut h, Vec2::new(90.0, 80.0), Vec2::new(92.0, 82.0), 4);
assert!(h.state().session.pending_window.is_none(), "the moving click closed the window");
assert_eq!(h.state().session.selection(), vec![ids[1]], "the window took the vertical line");
}
/// With PICKDRAG 0 no drag opens a window, and a click made while moving still picks the object.
#[test]
fn a_click_made_while_moving_picks_with_pickdrag_off() {
let mut h = select_harness();
let ids = handles(&h);
h.state_mut().session.settings.pickdrag = false;
press_moving(&mut h, Vec2::new(80.0, 40.0), Vec2::new(83.0, 41.0), 4);
assert_eq!(h.state().session.selection(), vec![ids[1]]);
assert!(h.state().session.pending_window.is_none());
}
/// TRIM's "Select object to trim": a click made while moving trims the part the button went down
/// on.
#[test]
fn a_click_made_while_moving_trims_in_trim() {
let mut h = select_harness();
// A vertical cutting edge through the horizontal line, at x = 30.
h.state_mut().session.execute("line", &json!({"points": [[30, 40], [30, 60]]})).unwrap();
h.state_mut().start("trim");
h.run_steps(2);
press_moving(&mut h, Vec2::new(36.0, 50.0), Vec2::new(39.0, 56.0), 4);
let got = lines(&h);
assert!(
got.iter().any(|(a, b)| a.near(Vec2::new(20.0, 50.0), 1e-6) && b.near(Vec2::new(30.0, 50.0), 1e-6)),
"the right part of the horizontal line was trimmed: {got:?}"
);
}
/// With SELECTIONCYCLING 2, a click made while moving over overlapping objects opens selection
/// cycling's list, as a still click does, instead of picking one of them.
#[test]
fn a_click_made_while_moving_over_overlapping_objects_lists_them() {
let mut h = select_harness();
h.state_mut().session.execute("line", &json!({"points": [[20, 50], [60, 50]]})).unwrap();
h.state_mut().session.execute("setvar", &json!({ "name": "SELECTIONCYCLING", "value": 2 })).unwrap();
h.state_mut().session.set_selection(Vec::new());
h.run_steps(2);
press_moving(&mut h, Vec2::new(30.0, 50.0), Vec2::new(32.0, 54.0), 4);
assert_eq!(h.state().canvas.cycle_rows().len(), 2, "both lines are listed");
assert!(h.state().session.selection().is_empty(), "nothing is picked until a row is chosen");
}
+28 -5
View File
@@ -99,7 +99,7 @@ fn right_click_settings_are_checked_and_survive_a_restart() {
#[test]
fn an_idle_right_click_can_repeat_the_last_command() {
let mut a = app();
a.run("options", json!({"rightClickDefault": "repeat"})).unwrap();
a.run("options", json!({"timeSensitiveRightClick": false, "rightClickDefault": "repeat"})).unwrap();
a.cmdline("circle 0,0 5");
assert!(!a.session.prompting());
let ctx = egui::Context::default();
@@ -116,6 +116,22 @@ fn an_idle_right_click_can_repeat_the_last_command() {
assert!(text.contains("Erase"), "the shortcut menu opens:\n{text}");
}
/// With the time-sensitive right-click on (the default), Default and Edit modes don't decide, as
/// in AutoCAD: a quick click is Enter (#1387) and a longer one opens the shortcut menu, even with
/// both set to repeat the last command.
#[test]
fn the_time_sensitive_right_click_decides_between_commands_too() {
let mut a = app();
a.run("options", json!({"rightClickDefault": "repeat", "rightClickEdit": "repeat"})).unwrap();
a.cmdline("circle 0,0 5");
assert!(!a.session.prompting());
let ctx = egui::Context::default();
frame(&mut a, &ctx, Vec::new(), 0.0);
let text = right_click(&mut a, &ctx, 0.1, 0.4);
assert!(!a.session.prompting(), "a longer click repeats nothing: {}", a.session.prompt_text());
assert!(text.contains("Repeat CIRCLE"), "the shortcut menu opens:\n{text}");
}
#[test]
fn command_mode_and_click_duration_decide_enter_or_the_menu() {
let ctx = egui::Context::default();
@@ -182,6 +198,17 @@ fn the_customization_window_sets_every_mode() {
h.get_by_label("Longer click duration:");
shot(&mut h, "options-right-click.png");
// Default, Edit and Command modes apply once the time-sensitive right-click is off; with it
// on, Default mode's choice can't be made.
if let Some(n) = h.get_all_by_label("Repeat last command").next() {
n.click();
}
h.run_steps(3);
assert_eq!(h.state().options.right_click_default, IdleClick::Menu);
h.get_by_label("Turn on time-sensitive right-click").click();
h.run_steps(3);
assert!(!h.state().options.time_sensitive_right_click);
// Default mode's "Repeat last command" comes first, Edit mode's second.
if let Some(n) = h.get_all_by_label("Repeat last command").next() {
n.click();
@@ -190,10 +217,6 @@ fn the_customization_window_sets_every_mode() {
assert_eq!(h.state().options.right_click_default, IdleClick::Repeat);
assert_eq!(h.state().options.right_click_edit, IdleClick::Menu);
// Command mode applies once the time-sensitive right-click is off.
h.get_by_label("Turn on time-sensitive right-click").click();
h.run_steps(3);
assert!(!h.state().options.time_sensitive_right_click);
h.get_by_label("Shortcut Menu: enabled when command options are present").click();
h.run_steps(3);
assert_eq!(h.state().options.right_click_command, CommandClick::MenuWithOptions);
+5 -7
View File
@@ -83,13 +83,11 @@ fn drag_is_disabled_but_two_clicks_still_complete_the_window() {
button(&mut h, a, true);
button(&mut h, a, false);
assert!(h.state().session.pending_window.is_some());
// A held-button movement after the first click must not consume the second corner.
drag(&mut h, a, b);
assert!(h.state().session.pending_window.is_some());
assert!(h.state().session.selection().is_empty());
h.run_steps(30); // Separate deliberate clicks from egui's double-click interval.
button(&mut h, b, true);
button(&mut h, b, false);
// The second corner is where the button goes down (#1001): a drag on from there, let go
// elsewhere, changes nothing.
h.run_steps(30); // Separate deliberate clicks from the double-click interval.
let away = xf.to_screen(Vec2::new(30.0, 8.0));
drag(&mut h, b, away);
assert!(h.state().session.pending_window.is_none());
assert_eq!(h.state().session.selection().len(), 1);
}
@@ -0,0 +1,189 @@
//! Press-first clicks (#1001): a click counts when the button goes down, where it went down, even
//! while the mouse is moving; holding the button after the pointer left a small tolerance makes a
//! drag. The harness runs at 60 frames a second and each queued event is one frame, so the number
//! of moves between press and release is how long the button was held.
use cadcraft_engine::Session;
use cadcraft_engine::doc::{Drawing, EntityKind, Space};
use cadcraft_engine::geom::Vec2;
use cadcraft_engine::prompt::Input;
use cadcraft_ui_egui::{CadApp, Services};
use egui::{Event, Modifiers, PointerButton, Pos2, vec2};
use egui_kittest::Harness;
use serde_json::json;
fn harness() -> Harness<'static, CadApp> {
let mut session = Session::empty();
session.open_drawing(Drawing::new_imperial(), "Press first", None);
session.execute("view.set", &json!({"center":[50,50],"height":100})).unwrap();
session.settings.osmode = 0;
session.settings.snapmode = false;
session.settings.orthomode = false;
session.execute("line", &json!({"points": [[20, 20], [60, 20]]})).unwrap();
let mut app = CadApp::new(session, Services::default());
app.canvas.zoom_pending = false;
let mut h = Harness::builder().with_size(vec2(1600.0, 1000.0)).with_step_dt(1.0 / 60.0).build_ui_state(
|ui, app: &mut CadApp| {
app.logic(ui.ctx());
app.ui(ui);
},
app,
);
h.run_steps(5);
h
}
fn screen(h: &Harness<'_, CadApp>, p: Vec2) -> Pos2 {
h.state().canvas.xf.unwrap().to_screen(p)
}
fn button(h: &mut Harness<'_, CadApp>, pos: Pos2, pressed: bool) {
h.event(Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE });
}
/// Press at `at`, then move `dx` points to the right over `frames` frames and let go there.
fn moving_click(h: &mut Harness<'_, CadApp>, at: Pos2, dx: f32, frames: usize) {
h.event(Event::PointerMoved(at));
button(h, at, true);
for i in 1..=frames {
h.event(Event::PointerMoved(at + vec2(dx * i as f32 / frames as f32, 0.0)));
}
button(h, at + vec2(dx, 0.0), false);
h.run_steps(2);
}
/// A click that moves 15 points while the button is down, let go within two frames.
fn quick_moving_click(h: &mut Harness<'_, CadApp>, at: Vec2) {
let pos = screen(h, at);
moving_click(h, pos, 15.0, 2);
}
fn start(h: &mut Harness<'_, CadApp>, id: &str) {
h.state_mut().start(id);
h.run_steps(2);
assert_eq!(h.state().session.running.as_ref().map(|r| r.id.as_str()), Some(id));
}
fn enter(h: &mut Harness<'_, CadApp>) {
h.state_mut().session.input(Input::Enter).unwrap();
h.run_steps(2);
}
fn lines(h: &Harness<'_, CadApp>) -> Vec<(Vec2, Vec2)> {
let st = h.state().session.state().unwrap();
st.doc
.space(&Space::Model)
.unwrap()
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Line(l) => Some((l.a.xy(), l.b.xy())),
_ => None,
})
.collect()
}
#[test]
fn move_takes_the_base_and_second_point_where_the_button_went_down() {
let mut h = harness();
start(&mut h, "move");
quick_moving_click(&mut h, Vec2::new(40.0, 20.0));
enter(&mut h);
// Base point and second point, both clicked on the move: 15 points is 1.5 drawing units here.
quick_moving_click(&mut h, Vec2::new(30.0, 40.0));
quick_moving_click(&mut h, Vec2::new(50.0, 40.0));
let got = lines(&h);
assert_eq!(got.len(), 1, "{got:?}");
assert!(got[0].0.near(Vec2::new(40.0, 20.0), 1e-3) && got[0].1.near(Vec2::new(80.0, 20.0), 1e-3), "moved by (20, 0): {got:?}");
}
#[test]
fn an_object_clicked_on_the_move_is_picked_with_no_command_running() {
let mut h = harness();
quick_moving_click(&mut h, Vec2::new(40.0, 20.0));
assert_eq!(h.state().session.selection().len(), 1);
assert!(h.state().session.pending_window.is_none());
}
#[test]
fn an_object_clicked_on_the_move_is_picked_at_select_objects() {
let mut h = harness();
start(&mut h, "erase");
quick_moving_click(&mut h, Vec2::new(40.0, 20.0));
enter(&mut h);
assert!(lines(&h).is_empty(), "the line was picked and erased");
}
#[test]
fn both_corners_of_a_click_click_window_count_while_the_mouse_moves() {
let mut h = harness();
// Lower left, then upper right: a window around the whole line.
quick_moving_click(&mut h, Vec2::new(10.0, 10.0));
assert!(h.state().session.pending_window.is_some(), "a quick click leaves the window open for the second corner");
quick_moving_click(&mut h, Vec2::new(70.0, 30.0));
assert!(h.state().session.pending_window.is_none());
assert_eq!(h.state().session.selection().len(), 1);
}
#[test]
fn holding_the_button_while_moving_drags_a_window() {
let mut h = harness();
// Half a second of dragging from lower left to upper right of the line.
let from = screen(&h, Vec2::new(10.0, 10.0));
let to = screen(&h, Vec2::new(70.0, 30.0));
h.event(Event::PointerMoved(from));
button(&mut h, from, true);
for i in 1..=30 {
h.event(Event::PointerMoved(from + (to - from) * (i as f32 / 30.0)));
}
button(&mut h, to, false);
h.run_steps(2);
assert!(h.state().session.pending_window.is_none(), "letting go closes the dragged window");
assert_eq!(h.state().session.selection().len(), 1);
}
#[test]
fn holding_still_then_moving_and_letting_go_quickly_is_a_click() {
let mut h = harness();
let at = screen(&h, Vec2::new(10.0, 10.0));
h.event(Event::PointerMoved(at));
button(&mut h, at, true);
// Held in place for half a second: no drag yet.
h.run_steps(30);
h.event(Event::PointerMoved(at + vec2(40.0, 0.0)));
button(&mut h, at + vec2(40.0, 0.0), false);
h.run_steps(2);
assert!(h.state().session.pending_window.is_some(), "still waiting for the second corner");
}
#[test]
fn two_window_corners_clicked_within_one_frame_both_count() {
let mut h = harness();
let (a, b) = (screen(&h, Vec2::new(10.0, 10.0)), screen(&h, Vec2::new(70.0, 30.0)));
// A slow frame: both clicks arrive before the next one is drawn.
for pos in [a, b] {
h.input_mut().events.push(Event::PointerMoved(pos));
for pressed in [true, false] {
h.input_mut().events.push(Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE });
}
}
h.run_steps(2);
assert!(h.state().session.pending_window.is_none());
assert_eq!(h.state().session.selection().len(), 1);
}
#[test]
fn cpolygon_points_clicked_on_the_move_all_count() {
// #1546: a narrow crossing polygon over the line's right end (x 58.6–59.9, the line ends at
// 60), each point clicked while moving. Taken where the buttons came up (1.5 units further
// right) it would miss the line.
let mut h = harness();
start(&mut h, "erase");
h.state_mut().session.input(Input::Keyword("CP".into())).unwrap();
h.run_steps(2);
for p in [Vec2::new(58.6, 15.0), Vec2::new(59.9, 15.0), Vec2::new(59.9, 25.0), Vec2::new(58.6, 25.0)] {
quick_moving_click(&mut h, p);
}
enter(&mut h);
enter(&mut h);
assert!(lines(&h).is_empty(), "the polygon crossed the line and ERASE removed it");
}
+3 -2
View File
@@ -88,11 +88,12 @@ fn a_click_made_while_the_mouse_moves_still_places_the_point() {
let down = screen(&h, Vec2::new(40.0, 10.0));
button(&mut h, down, true);
h.run_steps(1);
// The hand is already on its way to the next point when the button comes up.
// The hand is already on its way to the next point when the button comes up; the point is
// where the button went down (#1001), not where the hand got to.
let up = down + vec2(12.0, 0.0);
button(&mut h, up, false);
h.run_steps(2);
let got = lines(&h);
assert_eq!(got.len(), 1, "{got:?}");
assert!(got[0].1.near(h.state().canvas.xf.unwrap().to_world(up), 1e-4), "{got:?}");
assert!(got[0].1.near(h.state().canvas.xf.unwrap().to_world(down), 1e-4), "{got:?}");
}
+159
View File
@@ -0,0 +1,159 @@
//! A click on an object selects it, however long the frames around it take (#2813).
//!
//! egui calls a press that lasts longer than `max_click_duration` (0.8 s) a drag, and it times the
//! press by frames. On a large drawing that draws slowly, an ordinary click can come down in one
//! frame and up in the next, more than 0.8 s later. The canvas took that "drag" for a press-and-drag
//! selection window that never left the click, a window of no size, and nothing was selected; when
//! no frame ran while the button was down, egui reported nothing at all.
use cadcraft_engine::Session;
use cadcraft_engine::doc::{Drawing, Handle, Space};
use cadcraft_engine::geom::Vec2;
use cadcraft_ui_egui::{CadApp, Services};
use egui::{Event, Modifiers, PointerButton, Pos2, vec2};
use egui_kittest::Harness;
use serde_json::json;
/// Seconds each harness step advances egui's clock: two steps between press and release make a
/// press longer than egui's 0.8 s click limit.
const STEP: f32 = 0.5;
/// A drawing with one line from (10, 10) to (30, 10), no object snaps, nothing selected; each frame
/// advances egui's clock by [`STEP`].
fn harness() -> (Harness<'static, CadApp>, Handle) {
harness_stepping(STEP)
}
/// [`harness`] with each frame advancing egui's clock by `step` seconds.
fn harness_stepping(step: f32) -> (Harness<'static, CadApp>, Handle) {
let mut session = Session::empty();
session.open_drawing(Drawing::new_imperial(), "Slow clicks", None);
session.execute("view.set", &json!({"center": [50, 50], "height": 100})).unwrap();
session.settings.osmode = 0;
session.execute("line", &json!({"points": [[10, 10], [30, 10]]})).unwrap();
let line = session.doc().unwrap().space(&Space::Model).unwrap().iter().next().unwrap().handle;
let mut app = CadApp::new(session, Services::default());
app.canvas.zoom_pending = false;
let mut h = Harness::builder().with_size(vec2(1600.0, 1000.0)).with_step_dt(step).build_ui_state(
|ui, app: &mut CadApp| {
app.logic(ui.ctx());
app.ui(ui);
},
app,
);
h.run_steps(3);
(h, line)
}
fn screen(h: &Harness<'_, CadApp>, p: Vec2) -> Pos2 {
h.state().canvas.xf.unwrap().to_screen(p)
}
fn button(h: &mut Harness<'_, CadApp>, pos: Pos2, pressed: bool) {
h.event(Event::PointerMoved(pos));
h.event(Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE });
}
/// Press at `down`, let `frames` slow frames pass, release at `up`.
fn slow_click(h: &mut Harness<'_, CadApp>, down: Pos2, up: Pos2, frames: usize) {
button(h, down, true);
h.run_steps(frames);
button(h, up, false);
h.run_steps(2);
}
#[test]
fn a_click_spanning_slow_frames_selects_the_object() {
let (mut h, line) = harness();
let at = screen(&h, Vec2::new(20.0, 10.0));
slow_click(&mut h, at, at, 2);
assert_eq!(h.state().session.selection(), vec![line]);
assert!(h.state().session.pending_window.is_none(), "no window is left open");
}
/// The slowest case: the frame the button went down in took a second, and the next frame already
/// has it up. No frame ran with the button down, so egui reports neither a click nor a drag.
#[test]
fn a_click_across_one_slow_frame_selects_the_object() {
let (mut h, line) = harness_stepping(1.0);
let at = screen(&h, Vec2::new(20.0, 10.0));
slow_click(&mut h, at, at, 1);
assert_eq!(h.state().session.selection(), vec![line]);
}
/// A slow click on a grip of a selected object makes it hot, as a quick one does.
#[test]
fn a_slow_click_on_a_grip_starts_a_grip_edit() {
let (mut h, line) = harness();
h.state_mut().session.set_selection(vec![line]);
h.run_steps(2);
let grip = screen(&h, Vec2::new(30.0, 10.0));
slow_click(&mut h, grip, grip, 2);
assert_eq!(h.state().session.running.as_ref().map(|r| r.id.as_str()), Some("grip"));
}
/// The hand drifts a pixel or two while the button is down: still a click.
#[test]
fn a_slow_click_that_drifts_within_the_click_distance_selects_the_object() {
let (mut h, line) = harness();
let at = screen(&h, Vec2::new(20.0, 10.0));
slow_click(&mut h, at, at + vec2(2.0, 1.0), 2);
assert_eq!(h.state().session.selection(), vec![line]);
}
/// In empty space a slow click does what a quick one does there: it starts a click-click window.
#[test]
fn a_slow_click_in_empty_space_starts_a_window_as_a_click_does() {
let (mut h, _) = harness();
let at = screen(&h, Vec2::new(20.0, 40.0));
slow_click(&mut h, at, at, 2);
assert!(h.state().session.selection().is_empty());
let corner = h.state().session.pending_window.map(|w| w.corner);
assert!(corner.is_some_and(|c| c.near(Vec2::new(20.0, 40.0), 0.5)), "{corner:?}");
}
/// A real press-and-drag still opens and closes a selection window, slow or not.
#[test]
fn a_press_and_drag_still_selects_by_window() {
let (mut h, line) = harness();
let (from, to) = (screen(&h, Vec2::new(5.0, 15.0)), screen(&h, Vec2::new(35.0, 5.0)));
button(&mut h, from, true);
h.run_steps(1);
h.event(Event::PointerMoved(from + (to - from) / 2.0));
h.run_steps(2);
button(&mut h, to, false);
h.run_steps(2);
assert_eq!(h.state().session.selection(), vec![line]);
assert!(h.state().session.pending_window.is_none());
}
/// While a command asks for objects, a slow click on one picks it.
#[test]
fn a_slow_click_picks_at_select_objects() {
let (mut h, line) = harness();
h.state_mut().start("erase");
h.run_steps(2);
let at = screen(&h, Vec2::new(20.0, 10.0));
slow_click(&mut h, at, at, 2);
h.state_mut().session.input(cadcraft_engine::Input::Enter).unwrap();
h.run_steps(2);
let d = h.state().session.doc().unwrap();
assert!(d.entity(line).is_none(), "the line was picked and erased");
}
/// At a point prompt, a click across one slow frame places one point. This already worked (a drag
/// that stops at a point prompt counts as a click, #815). The test keeps it so, and shows the click
/// isn't counted twice (CIRCLE would take the second as the radius).
#[test]
fn a_click_across_one_slow_frame_places_a_point() {
let (mut h, _) = harness_stepping(1.0);
h.state_mut().start("circle");
h.run_steps(1);
let prompt = |h: &Harness<'_, CadApp>| h.state().session.current_prompt().map(|p| p.message).unwrap_or_default();
let center_prompt = prompt(&h);
let at = screen(&h, Vec2::new(60.0, 60.0));
slow_click(&mut h, at, at, 1);
let next = prompt(&h);
assert_ne!(next, center_prompt, "the center was taken");
assert!(next.to_ascii_lowercase().starts_with("specify radius"), "{next}");
}
@@ -0,0 +1,59 @@
//! Space is Enter at TRIM's and EXTEND's option prompts, as at AutoCAD's (#3092): typing `O`,
//! Space, `S`, Space switches to Standard mode instead of typing a space into the command line.
use cadcraft_engine::Session;
use cadcraft_ui_egui::{CadApp, Services};
use egui::{Key, Modifiers, vec2};
use egui_kittest::Harness;
fn harness() -> Harness<'static, CadApp> {
let app = CadApp::new(Session::new(), Services::default());
let mut h = Harness::builder().with_size(vec2(1600.0, 1000.0)).build_ui_state(
|ui, app: &mut CadApp| {
app.logic(ui.ctx());
app.ui(ui);
},
app,
);
h.run_steps(3);
h
}
/// Type `text` at the keyboard: a space arrives as the Space key and as text, like a real press.
fn type_keys(h: &mut Harness<'static, CadApp>, text: &str) {
for c in text.chars() {
if c == ' ' {
h.event(egui::Event::Key { key: Key::Space, physical_key: None, pressed: true, repeat: false, modifiers: Modifiers::NONE });
}
h.event(egui::Event::Text(c.to_string()));
h.run_steps(1);
}
h.run_steps(1);
}
fn header(h: &Harness<'static, CadApp>, name: &str) -> i64 {
h.state().session.doc().unwrap().header.i64(name, -1)
}
fn prompt(h: &Harness<'static, CadApp>) -> String {
h.state().session.current_prompt().map(|p| p.message).unwrap_or_default()
}
#[test]
fn space_answers_trim_and_extend_option_prompts() {
let mut h = harness();
type_keys(&mut h, "trim o s ");
assert_eq!(h.state().cmd.buffer, "", "Space typed a space instead of entering the option");
assert_eq!(header(&h, "TRIMEXTENDMODE"), 0, "S chose Standard mode");
// Standard mode asks for cutting edges; Enter selects all, then Project and Edge.
type_keys(&mut h, " p n e e ");
assert_eq!(h.state().cmd.buffer, "");
assert_eq!(header(&h, "PROJMODE"), 0, "N chose no projection");
assert_eq!(header(&h, "EDGEMODE"), 1, "E chose Extend");
assert!(prompt(&h).starts_with("Select object to trim"), "back at the trim prompt: {}", prompt(&h));
h.key_press(Key::Escape);
h.run_steps(2);
type_keys(&mut h, "extend o q ");
assert_eq!(h.state().cmd.buffer, "");
assert_eq!(header(&h, "TRIMEXTENDMODE"), 1, "Q chose Quick mode in EXTEND");
}