refactor: replace wildcard imports with explicit ones (S2208, batch_01)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

crates/engine/src/cmd/array/edit.rs

@@ -16,7 +16,8 @@ use serde_json::{Value, json};
 
 use super::super::helpers::v3;
 use super::super::machines::{SelOutcome, SelectPhase, number};
-use super::super::*;
+use super::super::{CommandSpec, bad, bool_or, point_param, targets};
+
 use super::{KEYWORDS, angle, check_size, count, fmt, nesting, other, yes, yes_no};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/audit.rs

@@ -5,7 +5,8 @@ use std::sync::Arc;
 
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, bad, bool_or, file, str_param};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/blocks.rs

@@ -12,7 +12,8 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, find_command, ok, point_param, point_req, point_value, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod attedit;

crates/engine/src/cmd/constraints.rs

@@ -14,7 +14,8 @@ use cadcraft_geom::{Line, Vec2};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, point_value, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 macro_rules! gc {

crates/engine/src/cmd/draw.rs

@@ -5,10 +5,15 @@ use cadcraft_doc::{EntityKind, HAlign, MText, Point, RayLine, Text, VAlign};
 use cadcraft_geom::{Arc, Circle, Ellipse, PolyVertex, Polyline, Spline, Vec2, arc_to_bulge, bulge_to_arc};
 use serde_json::{Value, json};
 
-use super::helpers::*;
+use super::helpers::{arc, circle, line, lwpoly, polygon_from_edge, polygon_typed_radius_point, polygon_vertices, v3};
+
 use super::machines::number;
 use super::pline_opts::{Outcome, PlineAsk};
-use super::*;
+use super::{
+    CommandSpec, bad, bool_or, distinct_points, f64_or, f64_req, find_command, point_param, point_req, point_value, points_param, size_param,
+    str_param,
+};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step, snap};
 
 /// Every draw command's spec: JSON parameters, menu path, aliases and the interactive prompt

crates/engine/src/cmd/draw2.rs

@@ -7,9 +7,11 @@ use cadcraft_geom::{Arc, Circle, Ellipse, Line, PolyVertex, Polyline, Spline, TA
 use serde_json::{Value, json};
 
 use super::curves::{self, Chain, MAX_GEN, TanObj};
-use super::helpers::*;
+use super::helpers::{arc, circle, line, lwpoly, rect_vertices, rect_with_corners, v3};
+
 use super::machines::number;
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, point_value, points_param, size_param, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 pub(crate) mod breakline;

crates/engine/src/cmd/groups/pick.rs

@@ -7,8 +7,7 @@ use std::collections::{HashMap, HashSet};
 use cadcraft_doc::Handle;
 use serde_json::{Value, json};
 
-use super::super::{CommandSpec, bad};
-
+use super::super::*;
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/hatch.rs

@@ -10,8 +10,7 @@ use cadcraft_geom::{Bounds2, PolyVertex, Polyline, Vec2, point_in_polygon};
 use serde_json::{Value, json};
 
 use super::helpers::lwpoly;
-use super::{CommandSpec, bad, bool_or, f64_or, point_param, points_param, size_param, str_param, targets};
-
+use super::*;
 use crate::{Accept, EngineError, Input, Interactive, Picker, Prompt, Result, Session, Step};
 
 mod assoc;
@@ -783,7 +782,7 @@ impl Interactive for BoundaryM {
 mod tests {
     use serde_json::json;
 
-    use super::{CommandSpec, bad, bool_or, f64_or, point_param, points_param, size_param, str_param, targets};
+    use super::*;
 
     /// The drawing's only hatch and its handle (hatches go to the back of the draw order, so not the last entity).
     fn only_hatch(s: &Session) -> (String, Hatch) {

crates/engine/src/cmd/hatch/patfile.rs

@@ -13,7 +13,7 @@ use cadcraft_doc::library::{PatternLine, pattern, standard_patterns};
 use serde_json::{Value, json};
 
 use super::super::helpers::support_text;
-use super::{Result, Session, bad, bool_or};
+use super::*;
 
 /// Most user patterns held at once.
 pub const MAX_USER_PATTERNS: usize = 4096;

crates/engine/src/cmd/inquiry.rs

@@ -6,8 +6,7 @@ use cadcraft_doc::{Entity, EntityKind, Handle};
 use cadcraft_geom::{Polyline, Vec2, Vec3};
 use serde_json::{Value, json};
 
-use super::{CommandSpec, bad, bool_or, point_req, points_param, targets};
-
+use super::*;
 use crate::units::{format_angle, format_distance};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
@@ -1012,7 +1011,7 @@ impl Interactive for AreaM {
 
 #[cfg(test)]
 mod tests {
-    use super::{CommandSpec, bad, bool_or, point_req, points_param, targets};
+    use super::*;
 
     /// #1440 review: a value one ulp past its bound (a border rectangle's shoelace area against
     /// the extents' `width * height`) is rounding, not a bug; a value clearly past it still is.

crates/engine/src/cmd/inquiry/count.rs

@@ -9,8 +9,7 @@ use cadcraft_doc::{Drawing, Entity, EntityKind, Handle, Insert, MAX_BLOCK_DEPTH,
 use cadcraft_geom::{Mat3, Vec2};
 use serde_json::{Value, json};
 
-use super::super::{bad, bool_or, point_req, str_param, targets};
-
+use super::super::*;
 use super::SelfCheck;
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/inquiry/loops.rs

@@ -13,8 +13,7 @@ use cadcraft_doc::{EntityKind, Handle};
 use cadcraft_geom::{Arc as GeoArc, EPS, Vec2};
 use serde_json::{Value, json};
 
-use super::super::bad;
-
+use super::super::*;
 use crate::{Result, Session};
 
 const CMD: &str = "loops";