Format imports so the CI fmt gate passes

* refactor: replace wildcard imports with explicit ones (S2208, batch_03)

* refactor: replace wildcard imports with explicit ones (S2208, batch_03)

* Format imports so the CI fmt gate passes

crates/engine/src/cmd/annoscale.rs

@@ -7,7 +7,8 @@ use cadcraft_doc::{AnnoScale, Drawing, EntityKind, Handle, MAX_SCALES, is_annota
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase, SelectRun};
-use super::*;
+use super::{CommandSpec, bad, f64_req, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/annotate.rs

@@ -9,7 +9,8 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase, SelectRun};
-use super::*;
+use super::{CommandSpec, bad, point_param, point_req, points_param, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, LeaderOrder, MLeaderOptions, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/annotate_dimedit.rs

@@ -5,8 +5,11 @@ use cadcraft_doc::{DimBreak, DimKind, Dimension, EntityKind, Handle, Inspection,
 use cadcraft_geom::{Segment, Vec2};
 use serde_json::{Value, json};
 
-use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::super::helpers::v3;
+use super::super::machines::{SelOutcome, SelectPhase};
+use super::super::{CommandSpec, bad, bool_or, point_param, point_req, size_param, str_param, targets};
+use super::{DimText, add_dim, circle_of, dim, dims_of, pick_at};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Most objects DIMBREAK Auto looks at, and most breaks it adds to one dimension.

crates/engine/src/cmd/annotate_qdim.rs

@@ -6,8 +6,10 @@ use cadcraft_doc::{DimKind, EntityKind, Handle, Prim};
 use cadcraft_geom::{Segment, Vec2};
 use serde_json::{Value, json};
 
-use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::super::machines::{SelOutcome, SelectPhase};
+use super::super::{bad, point_param, point_req, points_param, str_param, targets};
+use super::{MAX_CHAIN, assoc_enabled, dim};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub(super) const PARAMS: &str = "{handles?, at: [x,y] (dimension line position), mode?: continuous|staggered|baseline|ordinate|radius|diameter (default continuous), vertical?: bool (default: from `at`), datum?: [x,y] (baseline and ordinate; default the first point, or the origin for ordinate), add?: [[x,y]], remove?: [[x,y]] (dimension points; removes those within `tolerance`)}";

crates/engine/src/cmd/array.rs

@@ -17,7 +17,8 @@ use serde_json::{Value, json};
 use super::helpers::{line, v3};
 use super::machines::{SelOutcome, SelectPhase, number};
 use super::modify::transform_entities;
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, find_command, point_param, point_req, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod edit;

crates/engine/src/cmd/array/edit.rs

@@ -16,7 +16,8 @@ use serde_json::{Value, json};
 
 use super::super::helpers::v3;
 use super::super::machines::{SelOutcome, SelectPhase, number};
-use super::super::*;
+use super::super::{CommandSpec, bad, bool_or, point_param, targets};
+
 use super::{KEYWORDS, angle, check_size, count, fmt, nesting, other, yes, yes_no};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/audit.rs

@@ -5,7 +5,9 @@ use std::sync::Arc;
 
 use serde_json::{Value, json};
 
-use super::*;
+use super::{CommandSpec, bad, bool_or, file, str_param};
+
+use super::always;
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 pub fn specs() -> Vec<CommandSpec> {

crates/engine/src/cmd/blocks.rs

@@ -12,7 +12,9 @@ use serde_json::{Value, json};
 
 use super::helpers::v3;
 use super::machines::{SelOutcome, SelectPhase, number};
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, find_command, ok, point_param, point_req, point_value, str_param, targets};
+
+use super::has_doc;
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 mod attedit;

crates/engine/src/cmd/constraints.rs

@@ -14,7 +14,8 @@ use cadcraft_geom::{Line, Vec2};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, point_value, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 macro_rules! gc {

crates/engine/src/cmd/draw.rs

@@ -5,10 +5,15 @@ use cadcraft_doc::{EntityKind, HAlign, MText, Point, RayLine, Text, VAlign};
 use cadcraft_geom::{Arc, Circle, Ellipse, PolyVertex, Polyline, Spline, Vec2, arc_to_bulge, bulge_to_arc};
 use serde_json::{Value, json};
 
-use super::helpers::*;
+use super::helpers::{arc, circle, line, lwpoly, polygon_from_edge, polygon_typed_radius_point, polygon_vertices, v3};
+
 use super::machines::number;
 use super::pline_opts::{Outcome, PlineAsk};
-use super::*;
+use super::{
+    CommandSpec, bad, bool_or, distinct_points, f64_or, f64_req, find_command, point_param, point_req, point_value, points_param, size_param,
+    str_param,
+};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step, snap};
 
 /// Every draw command's spec: JSON parameters, menu path, aliases and the interactive prompt

crates/engine/src/cmd/draw2.rs

@@ -7,9 +7,11 @@ use cadcraft_geom::{Arc, Circle, Ellipse, Line, PolyVertex, Polyline, Spline, TA
 use serde_json::{Value, json};
 
 use super::curves::{self, Chain, MAX_GEN, TanObj};
-use super::helpers::*;
+use super::helpers::{arc, circle, line, lwpoly, rect_vertices, rect_with_corners, v3};
+
 use super::machines::number;
-use super::*;
+use super::{CommandSpec, bad, bool_or, f64_or, f64_req, point_param, point_req, point_value, points_param, size_param, str_param, targets};
+
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 
 pub(crate) mod breakline;

crates/engine/src/cmd/draw2/breakline.rs

@@ -9,9 +9,9 @@ use cadcraft_doc::{Drawing, EntityKind};
 use cadcraft_geom::{PolyVertex, Vec2};
 use serde_json::Value;
 
+use super::super::machines::number;
 use super::added;
 use super::curves::MAX_GEN;
-use super::machines::number;
 use super::*;
 use crate::cmd::modify2::as_lwpoly;
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};

crates/engine/src/cmd/draw2/mline.rs

@@ -9,8 +9,10 @@ use cadcraft_doc::{
 use cadcraft_geom::{Line, Vec2, line_line_infinite};
 use serde_json::{Value, json};
 
+use super::super::distinct_points;
+use super::super::machines::number;
+use super::super::ok;
 use super::curves::{self, MAX_GEN};
-use super::machines::number;
 use super::*;
 use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/file/compare.rs

@@ -12,7 +12,8 @@ use cadcraft_doc::{Drawing, Entity, EntityKind, Handle, MAX_BLOCK_DEPTH, Space,
 use cadcraft_geom::{Bounds2, Vec2};
 use serde_json::{Value, json};
 
-use super::super::*;
+use super::super::{CommandSpec, bad, str_param};
+
 use super::{base64_decode, io};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 

crates/engine/src/cmd/file/pgp.rs

@@ -12,8 +12,9 @@ use std::sync::{Mutex, MutexGuard, OnceLock, PoisonError};
 
 use serde_json::{Value, json};
 
+use super::super::always;
 use super::super::helpers::support_text;
-use super::*;
+use super::{CommandSpec, Result, Session, bad, bool_or, find_command};
 
 /// Most user aliases held.
 pub const MAX_ALIASES: usize = 10_000;

crates/engine/src/cmd/file/template.rs

@@ -10,7 +10,7 @@ use std::sync::{Mutex, MutexGuard, OnceLock, PoisonError};
 use cadcraft_doc::Drawing;
 use serde_json::{Value, json};
 
-use super::*;
+use super::{Result, Session, bad, io};
 
 /// The default template (profile setting, process-wide like FONTALT): empty = none.
 fn default_template() -> MutexGuard<'static, String> {

crates/engine/src/cmd/gripcmds.rs

@@ -5,7 +5,8 @@ use cadcraft_geom::{Mat3, Vec2};
 use serde_json::{Value, json};
 
 use super::curves;
-use super::*;
+use super::{CommandSpec, bad, bool_or, point_param, point_req, str_param, targets};
+
 use crate::grips::{GripAction, GripMode, grip_action, mode_matrix, stretch_grip};
 use crate::{EngineError, Result, Session};
 

crates/engine/src/cmd/groups.rs

@@ -11,7 +11,8 @@ use cadcraft_doc::{Drawing, Group, Handle};
 use serde_json::{Value, json};
 
 use super::machines::{SelOutcome, SelectPhase};
-use super::*;
+use super::{CommandSpec, bad, bool_or, str_param, targets};
+
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 mod dash;

crates/engine/src/cmd/groups/dash.rs

@@ -7,7 +7,8 @@ use serde_json::{Value, json};
 
 use super::super::machines::{SelOutcome, SelectPhase, number};
 use super::super::qselect::wildcard;
-use super::super::*;
+use super::super::{CommandSpec, bad, bool_or, str_param, targets};
+
 use super::{add_members, create, echo_list, find, remove_members, rename, ungroup, valid_name};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};