refactor: split complex fillet, model, dimstyle and rectangle code into helpers

Pure extraction, no behaviour change: same order of side effects, same early returns and error values. Clears cognitive-complexity findings on tangent_circles, Model::build_budgeted, DimStyle::apply_fields and run_rectang2 (S3776), and replaces a redundant closure with a method reference in menus.rs (S1612).
2026-10-28 12:56:47 -06:00 · 2026-10-25 21:38:39 -04:00
313 changed files with 29695 additions and 38119 deletions
@@ -1,3 +0,0 @@
-# Minimum cargo-nextest for this repository: GHSA-vc25-qg58-w57c is fixed in 0.9.150 and CI
-# installs exactly that version, so an older nextest refuses to run (exit 92 REQUIRED_VERSION_NOT_MET).
-nextest-version = "0.9.150"
@@ -1,26 +0,0 @@
-# Structural rules for the command-line code (RFC-0012): lint/ast-grep's rule tests, then a scan.
-# Seconds, no Rust build.
-name: ast-grep
-
-on:
-  push:
-    branches: [main]
-    paths: ["lint/ast-grep/**", "apps/cadcraft-cli/src/**", "apps/cadcraft/src/launch_args.rs", "apps/cadcraft/src/main.rs", ".github/workflows/ast-grep.yml"]
-  pull_request:
-    paths: ["lint/ast-grep/**", "apps/cadcraft-cli/src/**", "apps/cadcraft/src/launch_args.rs", "apps/cadcraft/src/main.rs", ".github/workflows/ast-grep.yml"]
-  workflow_dispatch:
-
-permissions:
-  contents: read
-
-concurrency:
-  group: ast-grep-${{ github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  scan:
-    # Tracked at @main like the other shared workflows.
-    uses: storytold/craft-common-actions/.github/workflows/ast-grep.yml@main
-    with:
-      config: lint/ast-grep/sgconfig.yml
-      paths: apps/cadcraft-cli/src apps/cadcraft/src/launch_args.rs apps/cadcraft/src/main.rs
@@ -21,27 +21,3 @@ jobs:
  lint:
    # Intentionally tracked at @main (not SHA-pinned) so org-wide CI improvements, security fixes, and build optimizations propagate without PR churn across all craftapp repos.
    uses: storytold/craft-common-actions/.github/workflows/packaging-lint.yml@main
-
-  windows-install-policy:
-    timeout-minutes: 10
-    name: Windows installation policy (no app build)
-    runs-on: windows-latest
-    steps:
-      - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 # v7.0.1
-        with:
-          persist-credentials: false
-      - name: Install the pinned packaging toolchain
-        shell: pwsh
-        run: |
-          $tools = Join-Path $env:RUNNER_TEMP 'craft-install-policy-wix'
-          dotnet tool install --tool-path $tools wix --version 5.0.2
-          if ($LASTEXITCODE -ne 0) { throw 'WiX installation failed.' }
-          $tools >> $env:GITHUB_PATH
-          $policy = Get-Content -Raw -LiteralPath packaging/windows/install-policy.json | ConvertFrom-Json
-          foreach ($extension in @($policy.extensions)) {
-            & (Join-Path $tools 'wix.exe') extension add -g "WixToolset.$extension.wixext/5.0.2"
-            if ($LASTEXITCODE -ne 0) { throw "WiX extension $extension installation failed." }
-          }
-      - name: Build and check non-executable installer fixtures
-        shell: pwsh
-        run: ./packaging/windows/test-install-policy.ps1 -OutputDirectory (Join-Path $env:RUNNER_TEMP 'craft-install-policy-tests')
@@ -25,10 +25,8 @@ permissions:

 jobs:
  windows-arm64:
-    # Immutable supporting workflow revision until the new install contract lands upstream.
-    uses: storytold/craft-common-actions/.github/workflows/windows-arm64.yml@8bb4e5ab95443171104ad88113fe1ef9b0e5ce3f
+    # Intentionally tracked at @main (not SHA-pinned) so org-wide CI improvements, security fixes, and build optimizations propagate without PR churn across all craftapp repos.
+    uses: storytold/craft-common-actions/.github/workflows/windows-arm64.yml@main
    with:
      app-name: cadcraft
      app-dir: CADCraft
-      install-relative-path: Programs/ArtCraft/CADCraft
-      install-scope: perUser
@@ -19,7 +19,7 @@ People trust CADCraft with their drawings; a crash loses their work. **This outr
 - **Bound recursion** (nested/cyclic block references: `MAX_BLOCK_DEPTH`).
 - **Last-resort guard:** `Session::execute` and every step of an interactive command (its factory, `begin`, input, `prompt` and `preview`; `crates/engine/src/guard.rs`) run under `catch_unwind`; an escaped panic restores the drawing and reports an error.
 - **Prove it:** every crash fix lands with a regression test (see `hostile_params_never_panic`, `hostile_dxf_does_not_panic`).
- Every workspace crate manifest carries `[lints] workspace = true` to inherit `[workspace.lints]`; every production crate root carries `#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]`.
+- Every production crate root carries `#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]`.

 ## Non-negotiables
 - **Clean-room.** AutoCAD is installed on the dev machine and may be *observed* black-box: run it, use its UI with synthetic drawings, take screenshots (by window id) stored only under `plan/autocad/screenshots/` (never committed). **Never** read, disassemble or copy anything inside the AutoCAD bundle (names/listings only); never copy Autodesk fonts (SHX), hatch patterns (`.pat`), linetypes (`.lin`), templates, CUI/PGP files, icons, artwork or help text; never commit files produced by AutoCAD. File formats come from public specifications (Autodesk's published DXF Reference, the Open Design Alliance's public DWG specification) and our own synthetic tests. Never copy or link GPL/LGPL/AGPL code (LibreDWG, LibreCAD, QCAD, FreeCAD's planegcs, SolveSpace, OpenCASCADE) — don't even read their sources.
@@ -24,10 +24,10 @@ Generated-in-code assets are original and have no file to list:
 | Asset | Author | Source | Licence | Notes |
 |---|---|---|---|---|
 | `epaint_default_fonts::EGUI_ICONS`, `epaint_default_fonts::EMOJI_ICON` (dependency font inputs) | John Slegers | [egui 173cc737](https://github.com/storytold/egui/tree/6d518fc799681571963842f95b55a6b68431b15a/crates/epaint_default_fonts/fonts), [emoji-icon-font](https://github.com/jslegers/emoji-icon-font) | MIT (Copyright (c) 2014 John Slegers; full upstream text in `NOTICE`) | egui-icons.ttf is the five-glyph subset; emoji-icon-font.ttf is the full monochrome fallback. Registered by the production default font definitions; dependency assets unmodified here, no font file copied into this repository. |
-| `krilla 0.8.2 / icc/sGrey-v2-magic.icc` (dependency-embedded) | Clinton Ingram | [craft-libs 9f89fe8 vendor/krilla/icc/sGrey-v2-magic.icc](https://github.com/storytold/craft-libs/blob/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc/sGrey-v2-magic.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `4110169287e5f1b5149ca9f1da1814d32943905bba8030e849d1a3b729a19481`. |
-| `krilla 0.8.2 / icc/sGrey-v4.icc` (dependency-embedded) | Clinton Ingram | [craft-libs 9f89fe8 vendor/krilla/icc/sGrey-v4.icc](https://github.com/storytold/craft-libs/blob/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc/sGrey-v4.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `00c0f94e09127520a17dc0e1d9264b5702081d96dbdb1549ee88e3631ce42a9d`. |
-| `krilla 0.8.2 / icc/sRGB-v2-magic.icc` (dependency-embedded) | Clinton Ingram | [craft-libs 9f89fe8 vendor/krilla/icc/sRGB-v2-magic.icc](https://github.com/storytold/craft-libs/blob/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc/sRGB-v2-magic.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `af4efe28f6d311799865f325ba39184a2e978b113ca74124d60af7de22b105f4`. |
-| `krilla 0.8.2 / icc/sRGB-v4.icc` (dependency-embedded) | Clinton Ingram | [craft-libs 9f89fe8 vendor/krilla/icc/sRGB-v4.icc](https://github.com/storytold/craft-libs/blob/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc/sRGB-v4.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `c56e1685d888f5edb92fe07f2750f387f8fe8e91b32ff8fb0b56bfbbb9458353`. |
+| `krilla 0.8.2 / icc/sGrey-v2-magic.icc` (dependency-embedded) | Clinton Ingram | [craft-libs a091680 vendor/krilla/icc/sGrey-v2-magic.icc](https://github.com/storytold/craft-libs/blob/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc/sGrey-v2-magic.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `4110169287e5f1b5149ca9f1da1814d32943905bba8030e849d1a3b729a19481`. |
+| `krilla 0.8.2 / icc/sGrey-v4.icc` (dependency-embedded) | Clinton Ingram | [craft-libs a091680 vendor/krilla/icc/sGrey-v4.icc](https://github.com/storytold/craft-libs/blob/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc/sGrey-v4.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `00c0f94e09127520a17dc0e1d9264b5702081d96dbdb1549ee88e3631ce42a9d`. |
+| `krilla 0.8.2 / icc/sRGB-v2-magic.icc` (dependency-embedded) | Clinton Ingram | [craft-libs a091680 vendor/krilla/icc/sRGB-v2-magic.icc](https://github.com/storytold/craft-libs/blob/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc/sRGB-v2-magic.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `af4efe28f6d311799865f325ba39184a2e978b113ca74124d60af7de22b105f4`. |
+| `krilla 0.8.2 / icc/sRGB-v4.icc` (dependency-embedded) | Clinton Ingram | [craft-libs a091680 vendor/krilla/icc/sRGB-v4.icc](https://github.com/storytold/craft-libs/blob/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc/sRGB-v4.icc) (Krilla 0.8.2 upstream 3ffdf0588cf98050aad6edba51ca70162e1fb5b5) | CC0-1.0 | Embedded by the pinned PDF writer (`craft-pdf` 0.1.0, Krilla 0.8.2); unmodified dependency asset, no file copied into this repository. SHA-256 `c56e1685d888f5edb92fe07f2750f387f8fe8e91b32ff8fb0b56bfbbb9458353`. |
 | `assets/app-icon/hicolor/128x128/apps/ai.storyteller.cadcraft.png` | CADCraft contributors | generated from `assets/app-icon/cadcraft-1024.png` | MIT OR Apache-2.0 | Linux hicolor icon |
 | `assets/app-icon/hicolor/16x16/apps/ai.storyteller.cadcraft.png` | CADCraft contributors | generated from `assets/app-icon/cadcraft-1024.png` | MIT OR Apache-2.0 | Linux hicolor icon |
 | `assets/app-icon/hicolor/24x24/apps/ai.storyteller.cadcraft.png` | CADCraft contributors | generated from `assets/app-icon/cadcraft-1024.png` | MIT OR Apache-2.0 | Linux hicolor icon |
@@ -19,7 +19,7 @@ People trust CADCraft with their drawings; a crash loses their work. **This outr
 - **Bound recursion** (nested/cyclic block references: `MAX_BLOCK_DEPTH`).
 - **Last-resort guard:** `Session::execute` and every step of an interactive command (its factory, `begin`, input, `prompt` and `preview`; `crates/engine/src/guard.rs`) run under `catch_unwind`; an escaped panic restores the drawing and reports an error.
 - **Prove it:** every crash fix lands with a regression test (see `hostile_params_never_panic`, `hostile_dxf_does_not_panic`).
- Every workspace crate manifest carries `[lints] workspace = true` to inherit `[workspace.lints]`; every production crate root carries `#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]`.
+- Every production crate root carries `#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]`.

 ## Non-negotiables
 - **Clean-room.** AutoCAD is installed on the dev machine and may be *observed* black-box: run it, use its UI with synthetic drawings, take screenshots (by window id) stored only under `plan/autocad/screenshots/` (never committed). **Never** read, disassemble or copy anything inside the AutoCAD bundle (names/listings only); never copy Autodesk fonts (SHX), hatch patterns (`.pat`), linetypes (`.lin`), templates, CUI/PGP files, icons, artwork or help text; never commit files produced by AutoCAD. File formats come from public specifications (Autodesk's published DXF Reference, the Open Design Alliance's public DWG specification) and our own synthetic tests. Never copy or link GPL/LGPL/AGPL code (LibreDWG, LibreCAD, QCAD, FreeCAD's planegcs, SolveSpace, OpenCASCADE) — don't even read their sources.
@@ -196,56 +196,6 @@ dependencies = [
 "libc",
 ]

-[[package]]
-name = "anstream"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "824a212faf96e9acacdbd09febd34438f8f711fb84e09a8916013cd7815ca28d"
-dependencies = [
- "anstyle",
- "anstyle-parse",
- "anstyle-query",
- "anstyle-wincon",
- "colorchoice",
- "is_terminal_polyfill",
- "utf8parse",
-]
-
-[[package]]
-name = "anstyle"
-version = "1.0.14"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "940b3a0ca603d1eade50a4846a2afffd5ef57a9feac2c0e2ec2e14f9ead76000"
-
-[[package]]
-name = "anstyle-parse"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "52ce7f38b242319f7cabaa6813055467063ecdc9d355bbb4ce0c68908cd8130e"
-dependencies = [
- "utf8parse",
-]
-
-[[package]]
-name = "anstyle-query"
-version = "1.1.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "40c48f72fd53cd289104fc64099abca73db4166ad86ea0b4341abe65af83dadc"
-dependencies = [
- "windows-sys 0.61.2",
-]
-
-[[package]]
-name = "anstyle-wincon"
-version = "3.0.11"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "291e6a250ff86cd4a820112fb8898808a366d8f9f58ce16d1f538353ad55747d"
-dependencies = [
- "anstyle",
- "once_cell_polyfill",
- "windows-sys 0.61.2",
-]
-
 [[package]]
 name = "anyhow"
 version = "1.0.104"
@@ -614,17 +564,14 @@ checksum = "fc652a48c352aef3ea3aed32080501cf3ef6ed5da78602a020c991775b0aff04"

 [[package]]
 name = "cadcraft"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-engine",
 "cadcraft-io",
 "cadcraft-mcp",
 "cadcraft-ui-egui",
 "chrono",
- "clap",
- "craft-ui",
 "craft-update",
- "craft-window",
 "eframe",
 "egui",
 "hidapi",
@@ -634,7 +581,6 @@ dependencies = [
 "rfd",
 "serde_json",
 "sys-locale",
- "thiserror 2.0.21",
 "windows",
 "winit",
 "winresource",
@@ -643,30 +589,25 @@ dependencies = [

 [[package]]
 name = "cadcraft-cli"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-engine",
 "cadcraft-io",
 "cadcraft-mcp",
 "cadcraft-render",
- "clap",
- "clap_complete",
- "clap_mangen",
- "same-file",
 "serde_json",
- "thiserror 2.0.21",
 ]

 [[package]]
 name = "cadcraft-color"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "serde",
 ]

 [[package]]
 name = "cadcraft-constraints"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-doc",
 "cadcraft-geom",
@@ -676,7 +617,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-doc"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-color",
 "cadcraft-geom",
@@ -687,14 +628,14 @@ dependencies = [

 [[package]]
 name = "cadcraft-dwg"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "acadrust",
 ]

 [[package]]
 name = "cadcraft-dxf"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "encoding_rs",
 "log",
@@ -703,7 +644,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-engine"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-color",
 "cadcraft-constraints",
@@ -724,7 +665,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-fonts"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-geom",
 "harfrust 0.14.0",
@@ -734,14 +675,14 @@ dependencies = [

 [[package]]
 name = "cadcraft-geom"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "serde",
 ]

 [[package]]
 name = "cadcraft-io"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "acadrust",
 "cadcraft-color",
@@ -762,12 +703,11 @@ dependencies = [

 [[package]]
 name = "cadcraft-mcp"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-engine",
 "cadcraft-io",
 "cadcraft-render",
- "clap",
 "getrandom 0.4.3",
 "log",
 "serde_json",
@@ -775,7 +715,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-render"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-color",
 "cadcraft-doc",
@@ -789,7 +729,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-ui-egui"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-color",
 "cadcraft-doc",
@@ -800,7 +740,6 @@ dependencies = [
 "chrono",
 "craft-ui",
 "craft-update",
- "craft-window",
 "egui",
 "egui-wgpu",
 "egui_kittest",
@@ -815,7 +754,7 @@ dependencies = [

 [[package]]
 name = "cadcraft-web"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "cadcraft-engine",
 "cadcraft-io",
@@ -921,65 +860,6 @@ dependencies = [
 "num-traits",
 ]

-[[package]]
-name = "clap"
-version = "4.6.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "aa8876b300ab35ba921adea3dfd70157a46249b33f95c9084ae5709785478946"
-dependencies = [
- "clap_builder",
- "clap_derive",
-]
-
-[[package]]
-name = "clap_builder"
-version = "4.6.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ec0797fb7aeb1406c84efac526901f7ec3ead2124f946b494e72879d4b54704d"
-dependencies = [
- "anstream",
- "anstyle",
- "clap_lex",
- "strsim",
-]
-
-[[package]]
-name = "clap_complete"
-version = "4.6.11"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "037e2a1a92236d0aff7e845093f64661d6df4c02c9fcc61a60e9e1d736fa392f"
-dependencies = [
- "clap",
-]
-
-[[package]]
-name = "clap_derive"
-version = "4.6.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f9c751b79415d4e559e3d1fcf128e09e720eb673a06d26cf6f392d37d75b66e0"
-dependencies = [
- "heck",
- "proc-macro2",
- "quote",
- "syn 3.0.9",
-]
-
-[[package]]
-name = "clap_lex"
-version = "1.1.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1c133bc6a41be0d194c306b5506d15e6feeea7b1d6604bd3f8310dfb2ca96486"
-
-[[package]]
-name = "clap_mangen"
-version = "0.3.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "211d617eaa4b735c96c9e0228fcbdb5120ef623f2b8cb67ffb84c3e02dbc28a4"
-dependencies = [
- "clap",
- "roff",
-]
-
 [[package]]
 name = "clipboard-win"
 version = "5.4.3"
@@ -989,15 +869,6 @@ dependencies = [
 "error-code",
 ]

-[[package]]
-name = "cobs"
-version = "0.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0fa961b519f0b462e3a3b4a34b64d119eeaca1d59af726fe450bbba07a9fc0a1"
-dependencies = [
- "thiserror 2.0.21",
-]
-
 [[package]]
 name = "codespan-reporting"
 version = "0.13.1"
@@ -1024,12 +895,6 @@ version = "1.1.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3d7b894f5411737b7867f4827955924d7c254fc9f4d91a6aad6b097804b1018b"

-[[package]]
-name = "colorchoice"
-version = "1.0.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1d07550c9036bf2ae0c684c4297d503f838287c83c53686d05370d0e139ae570"
-
 [[package]]
 name = "colored"
 version = "2.2.0"
@@ -1127,40 +992,12 @@ dependencies = [
 [[package]]
 name = "craft-docpath"
 version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
-
-[[package]]
-name = "craft-fonts-build"
-version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
-
-[[package]]
-name = "craft-i18n"
-version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
-dependencies = [
- "fixed_decimal",
- "icu_decimal",
- "icu_locale_core",
- "icu_locale_fallback",
- "icu_normalizer",
- "icu_plurals",
- "icu_properties",
- "icu_provider",
- "icu_provider_adapters",
- "icu_provider_blob",
- "log",
- "objc2-foundation 0.3.2",
- "sys-locale",
- "unicode-bidi",
- "windows-registry",
- "writeable",
-]
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"

 [[package]]
 name = "craft-pdf"
 version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"
 dependencies = [
 "hayro-syntax",
 "krilla",
@@ -1170,28 +1007,20 @@ dependencies = [
 [[package]]
 name = "craft-ui"
 version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"
 dependencies = [
- "craft-fonts-build",
- "craft-i18n",
 "egui",
- "epaint",
- "js-sys",
 "log",
 "objc2 0.6.5",
 "objc2-app-kit 0.3.2",
 "objc2-foundation 0.3.2",
 "serde",
- "skrifa 0.44.0",
- "wasm-bindgen",
- "wasm-bindgen-futures",
- "web-sys",
 ]

 [[package]]
 name = "craft-update"
 version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=495e5971bc024aa96e6ed318cb6e7cd3a0103184#495e5971bc024aa96e6ed318cb6e7cd3a0103184"
 dependencies = [
 "chrono",
 "dunce",
@@ -1213,17 +1042,6 @@ dependencies = [
 "zip",
 ]

-[[package]]
-name = "craft-window"
-version = "0.1.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
-dependencies = [
- "egui",
- "objc2 0.6.5",
- "objc2-app-kit 0.3.2",
- "wayland-client",
-]
-
 [[package]]
 name = "crc32fast"
 version = "1.5.3"
@@ -1723,17 +1541,6 @@ version = "0.1.15"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "1c66915cc5391097de7a2b0b972e8505aa33c0df401fd3a6811dbdb32881ba48"

-[[package]]
-name = "fixed_decimal"
-version = "0.7.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2214fb00f669ee96bee5bb29dfb1ddabe058b2bc426817efc79afa03c9bc55ae"
-dependencies = [
- "displaydoc",
- "smallvec",
- "writeable",
-]
-
 [[package]]
 name = "fixedbitset"
 version = "0.5.7"
@@ -2174,7 +1981,7 @@ checksum = "9f4d0e94ddd48749f06bbe4e5389fb9799a0c45bcaf00495042076ef05e3241a"
 [[package]]
 name = "hayro-jbig2"
 version = "0.3.0"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"
 dependencies = [
 "hayro-ccitt",
 ]
@@ -2188,7 +1995,7 @@ checksum = "c75ab947623ef4ccaa7acf0579edf7cbb5a73838e3839a7be73335e522f433a1"
 [[package]]
 name = "hayro-syntax"
 version = "0.7.2"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"
 dependencies = [
 "hayro-jbig2",
 "hayro-jpeg2000",
@@ -2208,12 +2015,6 @@ dependencies = [
 "stable_deref_trait",
 ]

-[[package]]
-name = "heck"
-version = "0.5.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2304e00983f87ffb38b55b444b5e3b60a884b5d30c0fca7d82fe33449bbe55ea"
-
 [[package]]
 name = "hermit-abi"
 version = "0.5.3"
@@ -2259,9 +2060,9 @@ checksum = "6dbf3de79e51f3d586ab4cb9d5c3e2c14aa28ed23d180cf89b4df0454a69cc87"

 [[package]]
 name = "icu_collections"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "fa68d21081c4a05d5a901a1c62add574c77048b6a1c67be3b50ce0b60d4ca513"
+checksum = "fe090a42a0d3140fed8c63263ed1fecc02422cb2f4bfe55cd8de2de1b8e105dd"
 dependencies = [
 "displaydoc",
 "potential_utf",
@@ -2271,111 +2072,44 @@ dependencies = [
 "zerovec",
 ]

-[[package]]
-name = "icu_decimal"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9eb8f655bba2d0c0459e43a5b0e6cd3cd388109898fb3d85d048165e8b0abd08"
-dependencies = [
- "displaydoc",
- "fixed_decimal",
- "icu_locale_core",
- "icu_pattern",
- "icu_plurals",
- "icu_provider",
- "serde",
- "writeable",
- "zerovec",
-]
-
 [[package]]
 name = "icu_locale_core"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d56e28588da92eee5c3201a6eff33fabdd49b62269c8938d4ff050ce4d900deb"
+checksum = "25d29b57c17c6528d0dc4c2141cfa2d08200465acb537a3909c8b9b8a4a984c0"
 dependencies = [
 "displaydoc",
 "litemap",
- "serde",
 "tinystr",
 "writeable",
 "zerovec",
 ]

-[[package]]
-name = "icu_locale_fallback"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "251af8e57c9400e3eb58242fe5b8b1152b2a64fdf4cf632f923c38ccee6f2fa9"
-dependencies = [
- "icu_locale_core",
- "icu_locale_fallback_data",
- "icu_provider",
- "potential_utf",
- "tinystr",
- "zerovec",
-]
-
-[[package]]
-name = "icu_locale_fallback_data"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "decf2a22ec8fa68f1a0c1129a3f8583f8f8bc24e8b9ccbe98ead99f62a4dc3a8"
-
 [[package]]
 name = "icu_normalizer"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "12f9cf5f235641ed274641dd81c3f28d870e276763d0797aeeab72317b1c646f"
+checksum = "404a3b8c486f205c87fe7f23ab6894d84a4ad76d6e4671ae1981ba7def87c599"
 dependencies = [
 "icu_collections",
 "icu_normalizer_data",
 "icu_properties",
 "icu_provider",
 "smallvec",
- "utf16_iter",
- "utf8_iter",
- "write16",
 "zerovec",
 ]

 [[package]]
 name = "icu_normalizer_data"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1563da1ed3e0b3bf3d74c9b85917ac9c56464d2f57242270c09c9e752f8021a0"
-
-[[package]]
-name = "icu_pattern"
-version = "0.5.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bc43ce0e76ee8cb0482dc6e2dbb9b76278e8038f45daabf2a2877577e2ceb18f"
-dependencies = [
- "displaydoc",
- "either",
- "serde",
- "writeable",
- "zerovec",
-]
-
-[[package]]
-name = "icu_plurals"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e475e6766ef87b1d3c1f97be6363995b0bfaeddbc789671615df598a97ff0593"
-dependencies = [
- "displaydoc",
- "fixed_decimal",
- "icu_provider",
- "serde",
- "zerovec",
-]
+checksum = "20f0088bfb7441f7a37fa0c9e20cb1e9cba1cac6b9ce8cd2a6dc44294f8e8cbc"

 [[package]]
 name = "icu_properties"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7e7ca276ad3145661a65914e6daf131ca5120cd3dcee8f8f3214b8875184a148"
+checksum = "2ea83d991c56158f7cf898bf86436c1dfe7c07ee82fe88951f2695c9f37a379f"
 dependencies = [
 "displaydoc",
 "icu_collections",
@@ -2388,21 +2122,18 @@ dependencies = [

 [[package]]
 name = "icu_properties_data"
-version = "2.3.0"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e590f038c1464a96894fd6d10127e90a8be4509f56ff7ecef851b15cee0b7caa"
+checksum = "b98f29af82d02b163fe50161388350e743bb3107cc8e8c2f7314cb505faddfcf"

 [[package]]
 name = "icu_provider"
-version = "2.3.1"
+version = "2.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d27bbb9d3abbefac45d55f647c9de1d44aafcd1186eb91879afef17c396c3e73"
+checksum = "413099315636c588ee8f011190b329b971a09a8fae9d157e01dcae8379468514"
 dependencies = [
 "displaydoc",
 "icu_locale_core",
- "postcard",
- "serde",
- "stable_deref_trait",
 "writeable",
 "yoke",
 "zerofrom",
@@ -2410,30 +2141,6 @@ dependencies = [
 "zerovec",
 ]

-[[package]]
-name = "icu_provider_adapters"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "df887bc4f55dbc773c7c45a0c7dfa75be886f7b7812830a71ab7271cc1801820"
-dependencies = [
- "icu_locale_fallback",
- "icu_provider",
-]
-
-[[package]]
-name = "icu_provider_blob"
-version = "2.3.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5916b44fac319d3f58e4d8d805a627df19e27937b582cd99fcde3bb6b7ce1b0e"
-dependencies = [
- "icu_provider",
- "postcard",
- "serde",
- "writeable",
- "zerotrie",
- "zerovec",
-]
-
 [[package]]
 name = "idna"
 version = "1.1.0"
@@ -2516,12 +2223,6 @@ dependencies = [
 "once_cell",
 ]

-[[package]]
-name = "is_terminal_polyfill"
-version = "1.70.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a6cb138bb79a146c1bd460005623e142ef0181e3d0219cb493e02f7d08a35695"
-
 [[package]]
 name = "itertools"
 version = "0.15.0"
@@ -2656,7 +2357,7 @@ dependencies = [
 [[package]]
 name = "krilla"
 version = "0.8.2"
-source = "git+https://github.com/storytold/craft-libs?rev=92d392cff132eaf53e13afff77f38b5c11b73aa0#92d392cff132eaf53e13afff77f38b5c11b73aa0"
+source = "git+https://github.com/storytold/craft-libs?rev=a0916808f7d78bed8c7b90cdf937176015454a7f#a0916808f7d78bed8c7b90cdf937176015454a7f"
 dependencies = [
 "base64 0.22.1",
 "bumpalo",
@@ -2754,9 +2455,6 @@ name = "litemap"
 version = "0.8.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "47d9d19d1d6efa0109d2f65ff4c85cddd50bd572e5a00127ab10987290bcefae"
-dependencies = [
- "serde_core",
-]

 [[package]]
 name = "litrs"
@@ -3376,12 +3074,6 @@ version = "1.21.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9f7c3e4beb33f85d45ae3e3a1792185706c8e16d043238c593331cc7cd313b50"

-[[package]]
-name = "once_cell_polyfill"
-version = "1.70.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "384b8ab6d37215f3c5301a95a4accb5d64aa607f1fcb26a11b5303878451b4fe"
-
 [[package]]
 name = "open"
 version = "5.4.5"
@@ -3694,24 +3386,12 @@ dependencies = [
 "portable-atomic",
 ]

-[[package]]
-name = "postcard"
-version = "1.1.3"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6764c3b5dd454e283a30e6dfe78e9b31096d9e32036b5d1eaac7a6119ccb9a24"
-dependencies = [
- "cobs",
- "serde",
-]
-
 [[package]]
 name = "potential_utf"
 version = "0.1.6"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "d83eb9bc6d8e5cf568e7a1101d60ee05e81ed50ea106026f3d18deeb046d7661"
 dependencies = [
- "serde_core",
- "writeable",
 "zerovec",
 ]

@@ -3954,12 +3634,6 @@ dependencies = [
 "windows-sys 0.52.0",
 ]

-[[package]]
-name = "roff"
-version = "1.1.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "323c417e1d9665a65b263ec744ba09030cfb277e9daa0b018a4ab62e57bc8189"
-
 [[package]]
 name = "ron"
 version = "0.12.2"
@@ -4475,12 +4149,6 @@ dependencies = [
 "unicode-properties",
 ]

-[[package]]
-name = "strsim"
-version = "0.11.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
-
 [[package]]
 name = "subsetter"
 version = "0.2.6"
@@ -4538,10 +4206,7 @@ version = "0.3.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "8eab9a99a024a169fe8a903cf9d4a3b3601109bcc13bd9e3c6fff259138626c4"
 dependencies = [
- "js-sys",
 "libc",
- "wasm-bindgen",
- "web-sys",
 ]

 [[package]]
@@ -4693,7 +4358,6 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "abc840c238154d58f9e86b2792261edfde565a17696e1cda1a449de27979801a"
 dependencies = [
 "displaydoc",
- "serde_core",
 "zerovec",
 ]

@@ -4936,12 +4600,6 @@ dependencies = [
 "serde",
 ]

-[[package]]
-name = "utf16_iter"
-version = "1.0.5"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c8232dd3cdaed5356e0f716d285e4b40b932ac434100fe9b7e0e8e935b9e6246"
-
 [[package]]
 name = "utf8-zero"
 version = "0.8.1"
@@ -4954,12 +4612,6 @@ version = "1.0.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "b6c140620e7ffbb22c2dee59cafe6084a59b5ffc27a8859a5f0d494b5d52b6be"

-[[package]]
-name = "utf8parse"
-version = "0.2.2"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"
-
 [[package]]
 name = "uuid"
 version = "1.29.0"
@@ -5556,17 +5208,6 @@ dependencies = [
 "windows-link",
 ]

-[[package]]
-name = "windows-registry"
-version = "0.6.1"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "02752bf7fbdcce7f2a27a742f798510f3e5ad88dbe84871e5168e2120c3d5720"
-dependencies = [
- "windows-link",
- "windows-result",
- "windows-strings",
-]
-
 [[package]]
 name = "windows-result"
 version = "0.4.1"
@@ -5807,20 +5448,11 @@ dependencies = [
 "read-fonts 0.39.2",
 ]

-[[package]]
-name = "write16"
-version = "1.0.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d1890f4022759daae28ed4fe62859b1236caebfc61ede2f63ed4e695f3f6d936"
-
 [[package]]
 name = "writeable"
 version = "0.6.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3ad82d2a33cdc9674dc7465672f271e096168fcdbe0f799d9e6db8c5892679dc"
-dependencies = [
- "either",
-]

 [[package]]
 name = "x11-dl"
@@ -5893,7 +5525,7 @@ checksum = "9440ea3e5aeabb0ac63af70daf835274065238cdd0cec83418f417eae38bacee"

 [[package]]
 name = "xtask"
-version = "0.14.0"
+version = "0.13.0"
 dependencies = [
 "chrono",
 "serde_json",
@@ -6082,11 +5714,8 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "4ea269c3bd32f0a32c321907a2ae912ba6f4649bb0fc764a15627e99a7095a3f"
 dependencies = [
 "displaydoc",
- "litemap",
- "serde_core",
 "yoke",
 "zerofrom",
- "zerovec",
 ]

 [[package]]
@@ -6095,7 +5724,6 @@ version = "0.11.9"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "f58a2799cfe9a1670c7ea8edbd52ef8edb93cb37a7f83bf31ba9e35d9dae6a40"
 dependencies = [
- "serde",
 "yoke",
 "zerofrom",
 "zerovec-derive",
@@ -4,7 +4,7 @@ members = ["crates/*", "apps/*", "xtask"]
 # default-members

 [workspace.package]
-version = "0.14.0"
+version = "0.13.0"
 edition = "2024"
 license = "MIT OR Apache-2.0"
 rust-version = "1.95"
@@ -25,17 +25,13 @@ cadcraft-engine = { path = "crates/engine" }
 cadcraft-ui-egui = { path = "crates/ui-egui" }
 cadcraft-mcp = { path = "crates/mcp" }
 # Which paths stored in a drawing (xrefs, data links) may be opened.
-craft-docpath = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0" }
+craft-docpath = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f" }
 # PDF writing (krilla) for plots, and reading them back in tests. The root patches below pin
 # craft-pdf's patched backends to the same revision (Cargo ignores dependency-local patches).
-craft-pdf = { version = "=0.1.0", git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0", default-features = false }
-clap = { version = "4", features = ["derive", "env"] }
-clap_complete = "4.6.11"
-clap_mangen = { version = "0.3.3", features = ["env"] }
+craft-pdf = { version = "=0.1.0", git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f", default-features = false }

 # foundation
 thiserror = "2"
-same-file = "1"
 serde = { version = "1", features = ["derive", "rc"] }
 serde_json = { version = "1", features = ["float_roundtrip"] }
 log = "0.4"
@@ -57,15 +53,14 @@ encoding_rs = "0.8.35"
 quick-xml = "0.42"

 # ui
-craft-ui = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0", features = ["serde"] }
-craft-window = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0", features = ["egui"] }
+craft-ui = { version = "0.1.0", git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f", features = ["serde"] }
 egui = { version = "0.37", default-features = false, features = ["default_fonts", "monochrome_emoji_fonts"] }
 egui_kittest = "0.37"
 eframe = { version = "0.37", default-features = false }
 egui-wgpu = "0.37"
 # Monotonic time on native and web (performance.now on wasm).
 web-time = "1.1"
-craft-update = { git = "https://github.com/storytold/craft-libs", version = "=0.1.0", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0", features = ["egui"] }
+craft-update = { git = "https://github.com/storytold/craft-libs", version = "=0.1.0", rev = "495e5971bc024aa96e6ed318cb6e7cd3a0103184", features = ["egui"] }
 rfd = "0.17"
 arboard = { version = "3.6", default-features = false }

@@ -73,11 +68,9 @@ arboard = { version = "3.6", default-features = false }
 unsafe_code = "forbid"

 [workspace.lints.clippy]
-cognitive_complexity = "deny"
-too_many_arguments = "deny"
-wildcard_imports = "deny"
 dbg_macro = "warn"
 todo = "warn"
+too_many_arguments = "allow"
 type_complexity = "allow"

 [profile.dev.package."*"]
@@ -97,9 +90,9 @@ debug = 0
 # PDF backends for craft-pdf: pinned to the same reviewed craft-libs revision as craft-pdf itself
 # (Cargo ignores dependency-local patches).
 [patch.crates-io]
-krilla = { version = "=0.8.2", git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0" }
-hayro-syntax = { git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0" }
-hayro-jbig2 = { git = "https://github.com/storytold/craft-libs", rev = "92d392cff132eaf53e13afff77f38b5c11b73aa0" }
+krilla = { version = "=0.8.2", git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f" }
+hayro-syntax = { git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f" }
+hayro-jbig2 = { git = "https://github.com/storytold/craft-libs", rev = "a0916808f7d78bed8c7b90cdf937176015454a7f" }

 # Keep the complete egui family and native event bridge on reviewed fork commits.
 ecolor = { git = "https://github.com/storytold/egui.git", rev = "6d518fc799681571963842f95b55a6b68431b15a" }
@@ -28,9 +28,9 @@ The PDF writer in the pinned craft-pdf 0.1.0 / Krilla 0.8.2 dependency embeds fo
 Profiles by Clinton Ingram, under CC0-1.0. They are unmodified dependency assets; no profile file
 is copied into this repository. Per-file sources and SHA-256 hashes are in ATTRIBUTION.md.
 Source: https://github.com/LaurenzV/krilla/tree/3ffdf0588cf98050aad6edba51ca70162e1fb5b5/crates/krilla/icc
-(pinned through https://github.com/storytold/craft-libs/tree/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc).
+(pinned through https://github.com/storytold/craft-libs/tree/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc).
 CC0 1.0 Universal: https://creativecommons.org/publicdomain/zero/1.0/
-Pinned licence text: https://github.com/storytold/craft-libs/blob/9f89fe8f6d72ab4db4cc06f186381a6a254463ab/vendor/krilla/icc/LICENSE
+Pinned licence text: https://github.com/storytold/craft-libs/blob/a0916808f7d78bed8c7b90cdf937176015454a7f/vendor/krilla/icc/LICENSE

 The UI's egui-icons.ttf subset and emoji-icon-font.ttf fallback are provided by epaint_default_fonts
 and registered through egui's default font definitions. They derive from emoji-icon-font by
@@ -196,7 +196,7 @@ crashed survives the next start. The file stops growing at 16 MiB. `--version` w

 | Variable | Effect |
 |---|---|
-| `CADCRAFT_CONFIG_DIR` | Use this directory instead of the platform settings directory (the log goes to its `logs/`); empty means no settings folder (no log file, autosave, workspace or plotters) |
+| `CADCRAFT_CONFIG_DIR` | Use this directory instead of the platform settings directory (the log goes to its `logs/`) |
 | `RUST_LOG` | Log levels for standard error and the log file. Default: `info` for CADCraft's own crates, `warn` for everything else. env_logger-style directives replace that, e.g. `RUST_LOG=debug`, `RUST_LOG=warn,cadcraft_io=trace` or `RUST_LOG=info,wgpu_core=warn`; a directive ending in `*` covers every target starting with it (`cadcraft*=debug`). `cadcraft_engine=debug` also logs every command-line message. |

 The logger is `apps/cadcraft/src/logging.rs`; the web build logs to the browser console instead.
@@ -238,9 +238,6 @@ MCP tools include `command_line` (type at the prompt), `execute` (any command wi
 To run LISP routines, scripts and alias files, or to drive CADCraft from your own programs, see
 [docs/customization.md](docs/customization.md).

-`cadcraft-cli --help` documents every subcommand and flag; exit codes, streams, environment
-variables and its RFC-0012 conventions are in [docs/cli.md](docs/cli.md).
-
 ## Architecture

 ```text
@@ -314,7 +311,6 @@ See [ROADMAP.md](ROADMAP.md) for the stage, measured parity and the estimate of
 Installers and executables are code-signed.

 The installer adds CADCraft to the Start menu and asks whether to add a desktop shortcut too (unticked by default). For a silent install with the desktop shortcut: `msiexec /i cadcraft-<ver>-windows-x64.msi /qn DESKTOPSHORTCUT=1`.
-A silent install is per-user by default; add `ALLUSERS=1`, from an elevated terminal or deployment tool, for an all-users install.

 **If the app doesn't open on Windows:** the desktop app initializes only DirectX 12 by default.
 Letting wgpu also create an OpenGL instance can crash some graphics drivers (AMD's
@@ -6,14 +6,6 @@ edition.workspace = true
 license.workspace = true
 publish = false

-[lib]
-name = "cadcraft_cli"
-path = "src/lib.rs"
-
-[[bin]]
-name = "cadcraft-cli"
-path = "src/main.rs"
-
 [lints]
 workspace = true

@@ -22,13 +14,4 @@ cadcraft-engine = { workspace = true }
 cadcraft-io = { workspace = true }
 cadcraft-mcp = { workspace = true }
 cadcraft-render = { workspace = true }
-clap = { workspace = true }
-same-file = { workspace = true }
 serde_json = { workspace = true }
-thiserror = { workspace = true }
-
-[dev-dependencies]
-# Shell completions and man pages (examples/man-and-completions.rs, for the Linux packages); not
-# in the binary.
-clap_complete = { workspace = true }
-clap_mangen = { workspace = true }
@@ -1,41 +0,0 @@
-//! Writes cadcraft-cli's shell completions ([`clap_complete`]: bash, zsh, fish, elvish,
-//! PowerShell) and man pages ([`clap_mangen`]: `cadcraft-cli.1` and one per subcommand, such as
-//! `cadcraft-cli-convert.1`) into a directory. The Linux packages ship them
-//! (`packaging/linux/package.sh`):
-//!
-//! ```sh
-//! cargo run -p cadcraft-cli --example man-and-completions -- <out-dir>
-//! ```
-
-use std::path::Path;
-use std::process::ExitCode;
-
-use clap::ValueEnum;
-use clap_complete::Shell;
-
-fn main() -> ExitCode {
-    let mut args = std::env::args_os().skip(1);
-    let (Some(dir), None) = (args.next(), args.next()) else {
-        eprintln!("usage: man-and-completions <out-dir>");
-        return ExitCode::from(2);
-    };
-    let dir = Path::new(&dir);
-    match generate(dir) {
-        Ok(()) => ExitCode::SUCCESS,
-        Err(e) => {
-            eprintln!("error: {}: {e}", dir.display());
-            ExitCode::FAILURE
-        }
-    }
-}
-
-pub(crate) fn generate(dir: &Path) -> std::io::Result<()> {
-    std::fs::create_dir_all(dir)?;
-    let mut cmd = cadcraft_cli::command();
-    for &shell in Shell::value_variants() {
-        clap_complete::generate_to(shell, &mut cmd, "cadcraft-cli", dir)?;
-    }
-    // A fresh command: `clap_complete::generate_to` built `cmd`, adding the `help` subcommand,
-    // which `clap_mangen` would otherwise give pages of its own (`cadcraft-cli-help-convert.1`).
-    clap_mangen::generate_to(cadcraft_cli::command(), dir)
-}
@@ -1,786 +0,0 @@
-//! The command line, as clap types. Values are parsed into their types here and the relations
-//! between flags are checked, so a bad value or combination is a usage error (exit 2) naming the
-//! flag, before any work starts; the handlers receive typed values only. A flag a subcommand
-//! doesn't take is a usage error too, so a typo can't be silently ignored. A value flag never takes
-//! the next flag as its value: a value starting with `-` is written `--save=-out.dxf` (or
-//! `./-out.dxf`).
-
-use std::ffi::{OsStr, OsString};
-use std::path::{Path, PathBuf};
-
-use cadcraft_engine::geom::{Bounds2, Vec2};
-use cadcraft_io::Format;
-use cadcraft_mcp::args::{blank_env_is_unset, name_env_vars};
-use clap::builder::{OsStringValueParser, PathBufValueParser, TypedValueParser};
-use clap::error::ErrorKind;
-use clap::parser::ValueSource;
-use clap::{ArgAction, ArgGroup, ArgMatches, Args, CommandFactory, FromArgMatches, Parser, Subcommand, ValueEnum};
-use serde_json::Value;
-
-/// Help text that names the formats of `list`, built once from [`Format::READ`] or [`Format::WRITE`]
-/// so it can't drift from what the code accepts.
-fn with_formats(cell: &'static std::sync::OnceLock<String>, before: &str, list: &[Format], after: &str) -> &'static str {
-    cell.get_or_init(|| format!("{before}({}){after}", Format::list(list)))
-}
-
-/// The drawing an input argument names.
-fn read_help() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "The drawing to read ", Format::READ, "")
-}
-
-fn open_help() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "Drawings to open ", Format::READ, "")
-}
-
-fn write_help() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "The file to write; its extension picks the format ", Format::WRITE, "")
-}
-
-fn save_help() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "Save the drawing to this file; its extension picks the format ", Format::WRITE, "")
-}
-
-fn export_help() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "Export the drawing to this file; its extension picks the format ", Format::WRITE, "")
-}
-
-fn convert_about() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    with_formats(&C, "Convert a drawing; OUT's extension picks the format ", Format::WRITE, "")
-}
-
-fn convert_long_about() -> &'static str {
-    static C: std::sync::OnceLock<String> = std::sync::OnceLock::new();
-    C.get_or_init(|| {
-        format!(
-            "{}\n\nImage output (png 2400x1600, svg, pdf) shows model space, fitted to the drawing extents unless\n--window or --view says otherwise.",
-            convert_about()
-        )
-    })
-}
-
-/// cadcraft-cli: headless CADCraft
-#[derive(Parser)]
-#[command(name = "cadcraft-cli", version = cadcraft_engine::build_version(), arg_required_else_help = true)]
-pub(crate) struct Cli {
-    #[command(subcommand)]
-    pub(crate) command: Command,
-}
-
-#[derive(Subcommand)]
-pub(crate) enum Command {
-    Info(InfoArgs),
-    Convert(ConvertArgs),
-    Run(RunArgs),
-    Commands(CommandsArgs),
-    Mcp(McpArgs),
-    Perf(PerfArgs),
-    Sample(SampleArgs),
-}
-
-/// Print a drawing's summary as JSON
-#[derive(Args)]
-pub(crate) struct InfoArgs {
-    #[arg(help = read_help())]
-    pub(crate) file: PathBuf,
-    /// One line of JSON instead of pretty-printed
-    #[arg(long)]
-    pub(crate) compact: bool,
-}
-
-/// Convert a drawing; OUT's extension picks the format
-#[derive(Args)]
-#[command(about = convert_about(), long_about = convert_long_about())]
-pub(crate) struct ConvertArgs {
-    #[arg(value_name = "IN", help = read_help())]
-    pub(crate) input: PathBuf,
-    #[arg(value_name = "OUT", help = write_help())]
-    pub(crate) output: PathBuf,
-    #[command(flatten)]
-    pub(crate) framing: FramingArgs,
-    /// Allow an output that is an input file, replacing the original
-    #[arg(long)]
-    pub(crate) in_place: bool,
-    #[command(flatten)]
-    pub(crate) settings: Settings,
-}
-
-/// The settings the desktop app reads from its environment, for the subcommands that draw or run
-/// commands. A variable is the flag's fallback; an empty one counts as unset, except
-/// `CADCRAFT_CONFIG_DIR`.
-#[derive(Args)]
-#[command(next_help_heading = "Settings")]
-pub(crate) struct Settings {
-    /// The settings folder; plotter configurations are in its `plotters` folder (default: the
-    /// platform's settings folder). An empty value means no settings folder
-    // Not RFC-0012 rule 1.7's "an empty variable counts as unset": an empty value is the
-    // documented way to run with no settings folder (isolated runs, tests), and it predates the
-    // CLI port. Keep it out of any blanket treatment of empty variables.
-    #[arg(long, value_name = "DIR", env = "CADCRAFT_CONFIG_DIR", value_parser = OsStringValueParser::new().map(PathBuf::from))]
-    pub(crate) config_dir: Option<PathBuf>,
-    /// The font that replaces a missing one (FONTALT)
-    #[arg(long, value_name = "FONT", env = "CADCRAFT_FONTALT")]
-    pub(crate) fontalt: Option<String>,
-    /// The fonts tried, in order, for characters a font lacks, comma-separated (FONTFALLBACK)
-    #[arg(long, value_name = "FONTS", env = "CADCRAFT_FONTFALLBACK")]
-    pub(crate) fontfallback: Option<String>,
-}
-
-impl Settings {
-    /// Install the settings for this run; an unset one is the default. An empty or blank
-    /// `--config-dir` is no settings folder.
-    pub(crate) fn apply(&self) {
-        cadcraft_engine::settings_dir::set(self.settings_dir());
-        cadcraft_engine::fonts::ttf::set_font_alt(self.fontalt.as_deref().unwrap_or(""));
-        cadcraft_engine::fonts::ttf::set_fallback_fonts(self.fontfallback.as_deref().unwrap_or(""));
-    }
-
-    /// The settings folder: `--config-dir`, else the platform's; `None` when the flag is empty or
-    /// blank.
-    fn settings_dir(&self) -> Option<PathBuf> {
-        match &self.config_dir {
-            Some(dir) if dir.to_str().is_some_and(|d| d.trim().is_empty()) => None,
-            Some(dir) => Some(dir.clone()),
-            None => cadcraft_engine::settings_dir::platform(|k| std::env::var_os(k)),
-        }
-    }
-}
-
-// What part of model space an image shows: shared by `convert` and `run`.
-#[derive(Args)]
-pub(crate) struct FramingArgs {
-    /// Show this rectangle (drawing units, x0<x1, y0<y1), centred and scaled to fit the image
-    /// without distortion. A negative x0 needs the `=` form: --window=-10,0,10,5
-    #[arg(long, value_name = "x0,y0,x1,y1", value_parser = parse_window, conflicts_with = "view")]
-    pub(crate) window: Option<Bounds2>,
-    /// What part of model space the image shows (case-insensitive)
-    #[arg(long, value_name = "extents|current", value_enum, ignore_case = true)]
-    pub(crate) view: Option<ViewMode>,
-}
-
-/// `--view`.
-#[derive(Clone, Copy, Debug, PartialEq, ValueEnum)]
-pub(crate) enum ViewMode {
-    /// Always fit the drawing extents
-    Extents,
-    /// The current view, as last set by zoom, pan or view.set (a freshly opened drawing's view is
-    /// its extents plus a 10% margin)
-    Current,
-}
-
-/// Open drawings (or start a new one), run scripts and commands in order, save or export the result
-///
-/// Drawings open in the order given, and the last one is current; without any, a new imperial
-/// drawing is used. --script, --script-file and --cmd steps run in the order given, and each
-/// --cmd prints its JSON result on one line (JSON lines); a command with no result prints nothing.
-/// An image --export (png 2400x1600, svg, pdf) shows model space:
-/// the current view if the steps changed it (zoom, pan, view.set…), otherwise the drawing
-/// extents, unless --window or --view says otherwise.
-#[derive(Args)]
-#[command(group(ArgGroup::new("framing").args(["window", "view"]).multiple(true).requires("export")))]
-#[command(after_long_help = r#"--cmd chaining:
-  A --cmd parameter value of exactly "{last}" is replaced with the last object handle an
-  earlier --cmd in the same run returned, so a command can act on what the previous one made:
-    --cmd 'mview {"p1":[20,20],"p2":[200,150]}'        prints {"viewports":["100"]}
-    --cmd 'viewport.set {"handle":"{last}","scale":1}' changes viewport 100
-  It works in any parameter, at any depth (e.g. "handles":["{last}"]); every other string is
-  passed unchanged. With no earlier returned handle the run fails and says so."#)]
-pub(crate) struct RunArgs {
-    #[arg(value_name = "FILE", help = open_help())]
-    pub(crate) files: Vec<PathBuf>,
-    /// Open the built-in sample drawing
-    #[arg(long)]
-    pub(crate) sample: bool,
-    /// Start a new metric drawing
-    #[arg(long)]
-    pub(crate) metric: bool,
-    /// Command-line script text to run (`\n` separates lines)
-    #[arg(long, value_name = "TEXT", action = ArgAction::Append)]
-    pub(crate) script: Vec<String>,
-    /// A script file (.scr) to run
-    #[arg(long, value_name = "F.scr", action = ArgAction::Append)]
-    pub(crate) script_file: Vec<PathBuf>,
-    /// An engine command and its JSON parameters (default {}); see "--cmd chaining" in --help
-    #[arg(long, value_name = "id {json}", action = ArgAction::Append, value_parser = cmd_step)]
-    pub(crate) cmd: Vec<CmdStep>,
-    #[arg(long, value_name = "OUT.dxf", help = save_help())]
-    pub(crate) save: Option<PathBuf>,
-    #[arg(long, value_name = "OUT.png", help = export_help())]
-    pub(crate) export: Option<PathBuf>,
-    #[command(flatten)]
-    pub(crate) framing: FramingArgs,
-    /// Allow an output that is an input file, replacing the original
-    #[arg(long)]
-    pub(crate) in_place: bool,
-    #[command(flatten)]
-    pub(crate) settings: Settings,
-    /// The drawings, in command-line order, set by [`parse`].
-    #[arg(skip)]
-    pub(crate) drawings: Vec<Drawing>,
-    /// The steps, in command-line order, set by [`parse`].
-    #[arg(skip)]
-    pub(crate) steps: Vec<Step>,
-}
-
-/// A drawing `run` opens.
-#[derive(Clone, Debug, PartialEq)]
-pub(crate) enum Drawing {
-    File(PathBuf),
-    Sample,
-    Metric,
-}
-
-/// A `--script`, `--script-file` or `--cmd` of `run`.
-#[derive(Clone, Debug, PartialEq)]
-pub(crate) enum Step {
-    Script(String),
-    ScriptFile(PathBuf),
-    Cmd(CmdStep),
-}
-
-/// `--cmd 'id {json}'`: an engine command and its parameters. `{last}` placeholders are filled in
-/// when it runs.
-#[derive(Clone, Debug, PartialEq)]
-pub(crate) struct CmdStep {
-    pub(crate) id: String,
-    pub(crate) params: Value,
-}
-
-/// Print the command catalog as JSON
-#[derive(Args)]
-pub(crate) struct CommandsArgs {
-    /// Only the commands whose id or label contains this text (case-insensitive)
-    pub(crate) filter: Option<String>,
-    /// One line of JSON instead of pretty-printed
-    #[arg(long)]
-    pub(crate) compact: bool,
-}
-
-/// Run the MCP server on stdio: a headless drawing session, or a bridge to the running app
-#[derive(Args)]
-pub(crate) struct McpArgs {
-    /// Bridge to the app's control channel (its --control port, e.g. 127.0.0.1:7979)
-    #[arg(long, value_name = "HOST:PORT", value_parser = connect_addr)]
-    pub(crate) connect: Option<String>,
-    /// Reach the app at the first call instead of at startup, so the server can start before the
-    /// app is open
-    #[arg(long, requires = "connect")]
-    pub(crate) lazy: bool,
-    /// Like --lazy, and a call that finds nothing at HOST:PORT opens the app with that control
-    /// port first (macOS)
-    #[arg(long, requires = "connect")]
-    pub(crate) launch: bool,
-    #[command(flatten)]
-    pub(crate) settings: Settings,
-}
-
-/// Time the engine on a synthetic N-entity drawing (default 200000), or the canvas display-list
-/// build of a drawing, zoomed in step by step
-#[derive(Args)]
-pub(crate) struct PerfArgs {
-    /// An entity count (clamped to 1-20000000), or a drawing to time
-    #[arg(value_name = "N|FILE", value_parser = PathBufValueParser::new().map(perf_target))]
-    pub(crate) target: Option<PerfTarget>,
-}
-
-/// What `perf` times.
-#[derive(Clone, Debug, PartialEq)]
-pub(crate) enum PerfTarget {
-    /// A synthetic drawing with this many entities, within [`MAX_PERF_COUNT`].
-    Count(usize),
-    File(PathBuf),
-}
-
-/// The largest synthetic drawing `perf` builds.
-const MAX_PERF_COUNT: usize = 20_000_000;
-
-/// `perf N|FILE`: a value that reads as a count is one, clamped to 1..=[`MAX_PERF_COUNT`] so `perf
-/// 0` still times something; anything else is a drawing.
-fn perf_target(p: PathBuf) -> PerfTarget {
-    match p.to_str().and_then(|t| t.parse::<usize>().ok()) {
-        Some(n) => PerfTarget::Count(n.clamp(1, MAX_PERF_COUNT)),
-        None => PerfTarget::File(p),
-    }
-}
-
-/// Write a built-in sample drawing
-#[derive(Args)]
-pub(crate) struct SampleArgs {
-    /// Which sample
-    #[arg(value_name = "bracket|floorplan", value_enum)]
-    pub(crate) name: SampleName,
-    #[arg(value_name = "OUT", help = write_help())]
-    pub(crate) output: PathBuf,
-    #[command(flatten)]
-    pub(crate) settings: Settings,
-}
-
-/// `sample`'s drawings.
-#[derive(Clone, Copy, Debug, PartialEq, ValueEnum)]
-pub(crate) enum SampleName {
-    Bracket,
-    #[value(alias = "floor")]
-    Floorplan,
-}
-
-/// What part of model space an image export shows.
-#[derive(Clone, Copy, Debug, PartialEq)]
-pub(crate) enum Framing {
-    /// `run`: the current view if the commands changed it, else the extents. `convert`: extents.
-    Auto,
-    Extents,
-    Current,
-    Window(Bounds2),
-}
-
-/// Why a `--window` value is refused: clap prints it after the flag and its value (exit 2).
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum WindowError {
-    #[error("expected four numbers x0,y0,x1,y1")]
-    NeedsFour,
-    #[error("{name} must be a finite number, got `{value}`")]
-    NotFinite { name: &'static str, value: String },
-    #[error("need x0 < x1 and y0 < y1 (lower-left corner first)")]
-    Order,
-    #[error(transparent)]
-    Limits(#[from] cadcraft_io::IoError),
-}
-
-/// Why a value is refused: clap prints it after the flag and its value (exit 2).
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum ValueError {
-    #[error("expected HOST:PORT (the app's --control port, e.g. 127.0.0.1:7979)")]
-    Connect,
-    #[error("expected a command id, then optionally its JSON parameters")]
-    CmdId,
-    #[error(transparent)]
-    CmdJson(#[from] serde_json::Error),
-}
-
-/// Why `parse` refuses flags clap accepted: clap prints it as a usage error (exit 2).
-#[derive(Debug, thiserror::Error)]
-enum UsageError {
-    /// The framing flags choose what an image shows; a drawing file has nothing to frame.
-    #[error("{flag} only applies to image output (png, svg, pdf), not `{}`", .out.display())]
-    FramingNeedsImage { flag: &'static str, out: PathBuf },
-    /// The output is one of the input files, so writing it would replace the original.
-    #[error("{} is an input file, so the result would replace the original: choose another output, or pass --in-place to overwrite it", .0.display())]
-    OutIsInput(PathBuf),
-}
-
-impl UsageError {
-    fn into_clap(self, cmd: &mut clap::Command) -> clap::Error {
-        let kind = match self {
-            Self::FramingNeedsImage { .. } | Self::OutIsInput(_) => ErrorKind::ArgumentConflict,
-        };
-        cmd.error(kind, self)
-    }
-}
-
-/// Parse `--window x0,y0,x1,y1` (min corner first). Hostile values are errors, never panics.
-pub(crate) fn parse_window(text: &str) -> Result<Bounds2, WindowError> {
-    let parts: Vec<&str> = text.split(',').map(str::trim).collect();
-    let [x0, y0, x1, y1] = parts.as_slice() else {
-        return Err(WindowError::NeedsFour);
-    };
-    let num = |name: &'static str, v: &str| -> Result<f64, WindowError> {
-        match v.parse::<f64>() {
-            Ok(n) if n.is_finite() => Ok(n),
-            _ => Err(WindowError::NotFinite { name, value: v.to_string() }),
-        }
-    };
-    let (x0, y0, x1, y1) = (num("x0", x0)?, num("y0", y0)?, num("x1", x1)?, num("y1", y1)?);
-    if !(x0 < x1 && y0 < y1) {
-        return Err(WindowError::Order);
-    }
-    let w = Bounds2 { min: Vec2::new(x0, y0), max: Vec2::new(x1, y1) };
-    cadcraft_io::check_window(&w)?;
-    Ok(w)
-}
-
-/// `run --cmd 'id {json}'`: the id up to the first space, then JSON parameters (default `{}`).
-/// Whether they suit the command is the command's to say.
-fn cmd_step(s: &str) -> Result<CmdStep, ValueError> {
-    let (id, json) = s.split_once(' ').unwrap_or((s, "{}"));
-    if id.is_empty() {
-        return Err(ValueError::CmdId);
-    }
-    Ok(CmdStep { id: id.to_string(), params: serde_json::from_str(json)? })
-}
-
-impl FramingArgs {
-    /// The framing `--window` or `--view` asks for (clap refuses both together).
-    pub(crate) fn framing(&self) -> Framing {
-        match (self.window, self.view) {
-            (Some(w), _) => Framing::Window(w),
-            (None, Some(ViewMode::Extents)) => Framing::Extents,
-            (None, Some(ViewMode::Current)) => Framing::Current,
-            (None, None) => Framing::Auto,
-        }
-    }
-
-    /// The framing flag given, if any.
-    fn flag(&self) -> Option<&'static str> {
-        if self.window.is_some() {
-            Some("--window")
-        } else if self.view.is_some() {
-            Some("--view")
-        } else {
-            None
-        }
-    }
-}
-
-/// A framing flag given with an output that isn't an image (the extension decides). `run` without
-/// `--export` is clap's `requires` error.
-fn framing_error(cli: &Cli) -> Option<UsageError> {
-    let (framing, out): (&FramingArgs, Option<&Path>) = match &cli.command {
-        Command::Convert(c) => (&c.framing, Some(&c.output)),
-        Command::Run(r) => (&r.framing, r.export.as_deref()),
-        _ => return None,
-    };
-    let (flag, out) = (framing.flag()?, out?);
-    (!cadcraft_io::is_image(out)).then(|| UsageError::FramingNeedsImage { flag, out: out.to_path_buf() })
-}
-
-/// An output that is the same file as an input, without `--in-place`. An output that doesn't exist
-/// can't be an input, and an I/O error in the comparison is left to the open or write that follows.
-fn out_is_input(cli: &Cli) -> Option<UsageError> {
-    let same = |input: &Path, out: &Path| out.exists() && same_file::is_same_file(input, out).unwrap_or(false);
-    match &cli.command {
-        Command::Convert(c) if !c.in_place && same(&c.input, &c.output) => Some(UsageError::OutIsInput(c.output.clone())),
-        Command::Run(r) if !r.in_place => {
-            let inputs = r.drawings.iter().filter_map(|d| if let Drawing::File(f) = d { Some(f) } else { None });
-            let inputs: Vec<&PathBuf> = inputs.collect();
-            [&r.save, &r.export].into_iter().flatten().find(|out| inputs.iter().any(|i| same(i, out))).map(|out| UsageError::OutIsInput(out.clone()))
-        }
-        _ => None,
-    }
-}
-
-/// The backend `cadcraft-cli mcp` serves from.
-#[derive(Debug, PartialEq, Eq)]
-pub(crate) enum McpTarget {
-    /// An in-process drawing session (no `--connect`).
-    Headless,
-    /// The running app's control channel at `HOST:PORT`; `lazy`: reached at the first call;
-    /// `launch`: opened then if it isn't running.
-    Connect { addr: String, lazy: bool, launch: bool },
-}
-
-impl McpArgs {
-    pub(crate) fn target(&self) -> McpTarget {
-        match &self.connect {
-            // `--launch` connects at the first call too (the app opens then).
-            Some(addr) => McpTarget::Connect { addr: addr.clone(), lazy: self.lazy || self.launch, launch: self.launch },
-            None => McpTarget::Headless,
-        }
-    }
-}
-
-/// `mcp --connect`: an empty, flag-like or port-less address is an error, never a silent fall back
-/// to a headless session (#103). The host is not resolved here.
-fn connect_addr(s: &str) -> Result<String, ValueError> {
-    let s = s.trim();
-    let valid = !s.starts_with('-')
-        && s.rsplit_once(':').is_some_and(|(host, port)| {
-            let host = host.strip_prefix('[').and_then(|h| h.strip_suffix(']')).unwrap_or(host);
-            !host.is_empty() && port.parse::<u16>().is_ok()
-        });
-    if valid { Ok(s.to_string()) } else { Err(ValueError::Connect) }
-}
-
-/// The values of `id` with their command-line indices.
-fn indexed<'a, T: Clone + Send + Sync + 'static>(m: &'a ArgMatches, id: &str) -> impl Iterator<Item = (usize, &'a T)> {
-    let at = m.indices_of(id).into_iter().flatten();
-    let values = m.try_get_many::<T>(id).ok().flatten().into_iter().flatten();
-    at.zip(values)
-}
-
-/// The command-line index of flag `id`, when it was given.
-fn flag_index(m: &ArgMatches, id: &str) -> Option<usize> {
-    if m.value_source(id) == Some(ValueSource::CommandLine) { m.indices_of(id).and_then(Iterator::last) } else { None }
-}
-
-/// `run`'s drawings and steps back in command-line order: clap keeps each flag's values apart,
-/// their indices say how they interleave.
-fn run_order(m: &ArgMatches) -> (Vec<Drawing>, Vec<Step>) {
-    let mut drawings: Vec<(usize, Drawing)> = indexed(m, "files").map(|(i, f): (_, &PathBuf)| (i, Drawing::File(f.clone()))).collect();
-    drawings.extend(flag_index(m, "sample").map(|i| (i, Drawing::Sample)));
-    drawings.extend(flag_index(m, "metric").map(|i| (i, Drawing::Metric)));
-    drawings.sort_by_key(|d| d.0);
-    let mut steps: Vec<(usize, Step)> = indexed(m, "script").map(|(i, s): (_, &String)| (i, Step::Script(s.clone()))).collect();
-    steps.extend(indexed(m, "script_file").map(|(i, s): (_, &PathBuf)| (i, Step::ScriptFile(s.clone()))));
-    steps.extend(indexed(m, "cmd").map(|(i, c): (_, &CmdStep)| (i, Step::Cmd(c.clone()))));
-    steps.sort_by_key(|s| s.0);
-    (drawings.into_iter().map(|d| d.1).collect(), steps.into_iter().map(|s| s.1).collect())
-}
-
-/// Parse the arguments (without the binary name). clap reads them as `OsString`s: a path need not
-/// be valid Unicode, text must. A bare `--help` or `-h` is help even after a mistake on the same
-/// line (`run --script --help`): clap reports the mistake first.
-pub(crate) fn parse(args: &[OsString]) -> Result<Cli, clap::Error> {
-    parse_with(command(|k| std::env::var_os(k)), args)
-}
-
-/// The command line. An empty or blank variable counts as unset, except `CADCRAFT_CONFIG_DIR`:
-/// empty means no settings folder. `var` looks a variable up.
-fn command(var: impl Fn(&OsStr) -> Option<OsString> + Copy) -> clap::Command {
-    let blank = move |a: clap::Arg| if a.get_id() == "config_dir" { a } else { blank_env_is_unset(a, var) };
-    Cli::command().mut_args(blank).mut_subcommands(|s| s.mut_args(blank))
-}
-
-/// [`parse`] with `cmd` from [`command`]; a bad value from a variable is a usage error naming the
-/// variable.
-fn parse_with(mut cmd: clap::Command, args: &[OsString]) -> Result<Cli, clap::Error> {
-    let argv = std::iter::once(OsString::from("cadcraft-cli")).chain(args.iter().cloned());
-    let matches = match cmd.try_get_matches_from_mut(argv) {
-        // `use_stderr`: a real error, not the help `-h` asked for (a retry would make it `--help`).
-        Err(e) if e.use_stderr() && args.iter().take_while(|a| *a != "--").any(|a| *a == "--help" || *a == "-h") => {
-            let help = [OsString::from("cadcraft-cli"), args.first().cloned().unwrap_or_default(), OsString::from("--help")];
-            return Err(cmd.try_get_matches_from_mut(help).err().unwrap_or(e));
-        }
-        matches => matches.map_err(|e| name_env_vars(e, &cmd, args))?,
-    };
-    let mut cli = Cli::from_arg_matches(&matches)?;
-    if let (Command::Run(r), Some((_, m))) = (&mut cli.command, matches.subcommand()) {
-        (r.drawings, r.steps) = run_order(m);
-    }
-    if let Some(e) = framing_error(&cli).or_else(|| out_is_input(&cli)) {
-        if let Some(sub) = matches.subcommand_name().and_then(|n| cmd.find_subcommand_mut(n)) {
-            return Err(e.into_clap(sub));
-        }
-        return Err(e.into_clap(&mut cmd));
-    }
-    Ok(cli)
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use serde_json::json;
-
-    fn parse_args(a: &[&str]) -> Result<Cli, clap::Error> {
-        parse(&a.iter().map(OsString::from).collect::<Vec<_>>())
-    }
-
-    fn mcp(a: &[&str]) -> Result<McpTarget, clap::Error> {
-        let args: Vec<&str> = std::iter::once("mcp").chain(a.iter().copied()).collect();
-        match parse_args(&args)?.command {
-            Command::Mcp(m) => Ok(m.target()),
-            _ => panic!("{a:?} is not mcp"),
-        }
-    }
-
-    /// Every file argument's help names each format of the list it uses.
-    #[test]
-    fn help_names_every_format() {
-        let cli = Cli::command();
-        let help = |sub: &str, arg: &str| {
-            let a = cli.find_subcommand(sub).and_then(|c| c.get_arguments().find(|a| a.get_id() == arg)).expect("argument exists");
-            a.get_help().map(|h| h.to_string()).unwrap_or_default()
-        };
-        let cases: [(&str, &str, &[Format]); 8] = [
-            ("info", "file", Format::READ),
-            ("convert", "input", Format::READ),
-            ("convert", "output", Format::WRITE),
-            ("run", "files", Format::READ),
-            ("run", "save", Format::WRITE),
-            ("run", "export", Format::WRITE),
-            ("sample", "output", Format::WRITE),
-            ("convert", "", Format::WRITE),
-        ];
-        for (sub, arg, list) in cases {
-            let text = if arg.is_empty() {
-                cli.find_subcommand(sub).and_then(|c| c.get_about()).map(|a| a.to_string()).unwrap_or_default()
-            } else {
-                help(sub, arg)
-            };
-            for f in list {
-                assert!(text.contains(f.extension()), "`{sub} {arg}` help `{text}` lacks {}", f.extension());
-            }
-        }
-    }
-
-    #[test]
-    fn mcp_without_connect_is_headless() {
-        assert_eq!(mcp(&[]).unwrap(), McpTarget::Headless);
-    }
-
-    #[test]
-    fn mcp_connect_with_address_selects_remote() {
-        let to = |addr: &str, lazy, launch| McpTarget::Connect { addr: addr.into(), lazy, launch };
-        assert_eq!(mcp(&["--connect", "127.0.0.1:7979"]).unwrap(), to("127.0.0.1:7979", false, false));
-        assert_eq!(mcp(&["--connect", " localhost:7979 "]).unwrap(), to("localhost:7979", false, false));
-        assert_eq!(mcp(&["--lazy", "--connect", "localhost:7979"]).unwrap(), to("localhost:7979", true, false));
-        assert_eq!(mcp(&["--connect", "localhost:7979", "--launch"]).unwrap(), to("localhost:7979", true, true));
-        assert_eq!(mcp(&["--connect", "[::1]:7979"]).unwrap(), to("[::1]:7979", false, false));
-        // Without an app to reach they mean nothing: never a headless session.
-        for flag in ["--lazy", "--launch"] {
-            assert_eq!(mcp(&[flag]).unwrap_err().kind(), clap::error::ErrorKind::MissingRequiredArgument, "{flag}");
-        }
-    }
-
-    #[test]
-    fn mcp_connect_without_address_is_an_error_not_headless() {
-        for bad in [
-            &["--connect"][..],
-            &["--connect", ""],
-            &["--connect", "  "],
-            &["--connect=-v"],
-            &["--connect", "example.com"],
-            &["--connect", ":7979"],
-            &["--connect", "host:99999"],
-            &["--connect", "[]:1"],
-        ] {
-            let r = mcp(bad);
-            let Err(e) = r else { panic!("{bad:?} should be rejected, got {r:?}") };
-            assert_eq!(e.exit_code(), 2, "{bad:?}");
-            assert!(e.to_string().contains("--connect <HOST:PORT>"), "{bad:?}: {e}");
-        }
-    }
-
-    #[test]
-    fn mcp_rejects_unknown_and_repeated_arguments() {
-        assert!(mcp(&["--conect", "127.0.0.1:7979"]).is_err());
-        assert!(mcp(&["127.0.0.1:7979"]).is_err());
-        // clap names the unknown flag, not the value it left missing.
-        for flag in ["--foo", "-v"] {
-            assert_eq!(mcp(&["--connect", flag]).unwrap_err().kind(), clap::error::ErrorKind::UnknownArgument, "{flag}");
-        }
-        assert!(mcp(&["--connect", "127.0.0.1:1", "--connect", "127.0.0.1:2"]).is_err());
-    }
-
-    #[test]
-    fn run_keeps_command_line_order() {
-        let args =
-            ["run", "a.dxf", "--script", "S1", "--metric", "--cmd", "c1", "b.dxf", "--script-file", "f.scr", "--sample", "--cmd", "c2 {\"n\":1}"];
-        let Command::Run(r) = parse_args(&args).unwrap().command else { panic!("not run") };
-        let file = |f: &str| Drawing::File(f.into());
-        let cmd = |id: &str, params| Step::Cmd(CmdStep { id: id.into(), params });
-        assert_eq!(r.drawings, [file("a.dxf"), Drawing::Metric, file("b.dxf"), Drawing::Sample]);
-        assert_eq!(r.steps, [Step::Script("S1".into()), cmd("c1", json!({})), Step::ScriptFile("f.scr".into()), cmd("c2", json!({"n": 1}))]);
-    }
-
-    #[test]
-    fn cmd_values() {
-        assert_eq!(cmd_step("line").unwrap(), CmdStep { id: "line".into(), params: json!({}) });
-        assert_eq!(cmd_step("line [1]").unwrap(), CmdStep { id: "line".into(), params: json!([1]) });
-        for bad in ["", " {}", "line {bad json", "line "] {
-            assert!(cmd_step(bad).is_err(), "`{bad}` should be rejected");
-        }
-    }
-
-    #[test]
-    fn perf_targets() {
-        let target = |a: &[&str]| -> Option<PerfTarget> {
-            let args: Vec<&str> = std::iter::once("perf").chain(a.iter().copied()).collect();
-            let Command::Perf(p) = parse_args(&args).unwrap().command else { panic!("not perf") };
-            p.target
-        };
-        assert_eq!(target(&[]), None);
-        assert_eq!(target(&["5"]), Some(PerfTarget::Count(5)));
-        assert_eq!(target(&["0"]), Some(PerfTarget::Count(1)));
-        assert_eq!(target(&["999999999"]), Some(PerfTarget::Count(MAX_PERF_COUNT)));
-        assert_eq!(target(&["a.dxf"]), Some(PerfTarget::File("a.dxf".into())));
-        assert_eq!(target(&["1e3"]), Some(PerfTarget::File("1e3".into())));
-    }
-
-    #[test]
-    fn framing_options() {
-        let framing = |out: &str, a: &[&str]| -> Result<Framing, clap::Error> {
-            let args: Vec<&str> = ["convert", "a.dxf", out].iter().chain(a).copied().collect();
-            let Command::Convert(c) = parse_args(&args)?.command else { panic!("not convert") };
-            Ok(c.framing.framing())
-        };
-        let b = |x0, y0, x1, y1| Bounds2::new(Vec2::new(x0, y0), Vec2::new(x1, y1));
-        assert_eq!(framing("b.png", &[]).unwrap(), Framing::Auto);
-        assert_eq!(framing("b.png", &["--view", "extents"]).unwrap(), Framing::Extents);
-        assert_eq!(framing("b.png", &["--view", "CURRENT"]).unwrap(), Framing::Current);
-        assert_eq!(framing("b.png", &["--window", "0,0,2,1"]).unwrap(), Framing::Window(b(0.0, 0.0, 2.0, 1.0)));
-        assert_eq!(framing("b.dxf", &[]).unwrap(), Framing::Auto);
-        let kind = |out: &str, a: &[&str]| framing(out, a).map(|_| ()).unwrap_err().kind();
-        assert_eq!(kind("b.png", &["--view", "selection"]), ErrorKind::InvalidValue);
-        assert_eq!(kind("b.png", &["--window", "0,0,2,1", "--view", "extents"]), ErrorKind::ArgumentConflict);
-        assert_eq!(kind("b.dxf", &["--view", "extents"]), ErrorKind::ArgumentConflict);
-        assert_eq!(kind("b.dxf", &["--window", "0,0,2,1"]), ErrorKind::ArgumentConflict);
-    }
-
-    #[test]
-    fn window_parses() {
-        let b = |x0, y0, x1, y1| Bounds2::new(Vec2::new(x0, y0), Vec2::new(x1, y1));
-        assert_eq!(parse_window("0,0,30,20").unwrap(), b(0.0, 0.0, 30.0, 20.0));
-        assert_eq!(parse_window(" -5.5, -1e3 ,2e3,4 ").unwrap(), b(-5.5, -1000.0, 2000.0, 4.0));
-    }
-
-    #[test]
-    fn hostile_window_is_an_error() {
-        for w in [
-            "",
-            "1,2,3",
-            "1,2,3,4,5",
-            "a,0,1,1",
-            "NaN,0,1,1",
-            "0,0,inf,1",
-            "0,0,1e400,1",
-            "0,0,0,1",
-            "0,0,1,0",
-            "5,0,1,1",
-            "0,5,1,1",
-            "-1e300,-1e300,1e300,1e300",
-            "0,0,1e-12,1e-12",
-        ] {
-            assert!(parse_window(w).is_err(), "`{w}` should be rejected");
-        }
-    }
-
-    /// The subcommands that draw or run commands take the settings flags; the others refuse them.
-    #[test]
-    fn settings_flags() {
-        let Command::Convert(c) =
-            parse_args(&["convert", "a.dxf", "b.png", "--config-dir", "/p", "--fontalt", "Noto Sans", "--fontfallback="]).unwrap().command
-        else {
-            panic!("not convert")
-        };
-        assert_eq!(c.settings.config_dir, Some(PathBuf::from("/p")));
-        assert_eq!((c.settings.fontalt.as_deref(), c.settings.fontfallback.as_deref()), (Some("Noto Sans"), Some("")));
-        for empty in ["--config-dir=", "--config-dir= "] {
-            let Command::Run(r) = parse_args(&["run", "--sample", empty]).unwrap().command else { panic!("not run") };
-            assert_eq!(r.settings.settings_dir(), None, "`{empty}` is no settings folder");
-        }
-        let Command::Convert(c) = parse_args(&["convert", "a.dxf", "b.png", "--config-dir", "/p"]).unwrap().command else { panic!("not convert") };
-        assert_eq!(c.settings.settings_dir(), Some(PathBuf::from("/p")));
-        assert!(parse_args(&["sample", "bracket", "b.dxf", "--fontalt", "x"]).is_ok());
-        assert!(parse_args(&["mcp", "--config-dir", "/p"]).is_ok());
-        assert!(parse_args(&["info", "a.dxf", "--config-dir", "/p"]).is_err());
-    }
-
-    #[test]
-    fn blank_variables_count_as_unset_except_the_config_dir() {
-        let cmd = command(|_| Some("".into()));
-        for sub in cmd.get_subcommands().filter(|s| s.get_arguments().any(|a| a.get_id() == "fontalt")) {
-            let env = |id: &str| sub.get_arguments().find(|a| a.get_id() == id).and_then(|a| a.get_env());
-            assert_eq!((env("fontalt"), env("fontfallback")), (None, None), "{}", sub.get_name());
-            assert_eq!(env("config_dir"), Some(OsStr::new("CADCRAFT_CONFIG_DIR")), "{}", sub.get_name());
-        }
-    }
-
-    /// `--fontalt` falls back to `PATH` and rejects every value here, as a bad value from a
-    /// variable would; tests can't set a variable (`set_var` is unsafe).
-    #[test]
-    fn a_bad_value_from_a_variable_names_the_variable() {
-        // Cargo sets CARGO_PKG_NAME for every test binary, so the variable always has a value.
-        let reject = clap::builder::PossibleValuesParser::new(["never"]);
-        let cmd = || Cli::command().mut_subcommand("sample", |s| s.mut_arg("fontalt", |a| a.env("CARGO_PKG_NAME").value_parser(reject.clone())));
-        let args = |a: &[&str]| a.iter().map(OsString::from).collect::<Vec<_>>();
-        let text = parse_with(cmd(), &args(&["sample"])).err().map(|e| e.to_string()).unwrap_or_default();
-        assert!(text.contains("for 'CARGO_PKG_NAME'") && !text.contains("--fontalt"), "{text}");
-        let text = parse_with(cmd(), &args(&["sample", "--fontalt", "x"])).err().map(|e| e.to_string()).unwrap_or_default();
-        assert!(text.contains("--fontalt"), "{text}");
-    }
-}
@@ -1,17 +0,0 @@
-use super::args::CommandsArgs;
-use super::error::Result;
-use super::output::Streams;
-use cadcraft_engine::Session;
-use serde_json::Value;
-
-pub(crate) fn commands(a: &CommandsArgs, io: &mut Streams) -> Result {
-    let s = Session::new();
-    let f = a.filter.as_ref().map(|x| x.to_ascii_lowercase());
-    let v: Vec<Value> = cadcraft_engine::command_specs()
-        .iter()
-        .filter(|c| f.as_ref().is_none_or(|f| c.id.contains(f.as_str()) || c.label.to_ascii_lowercase().contains(f.as_str())))
-        .map(|c| serde_json::to_value(c.info(&s)).unwrap_or_default())
-        .collect();
-    io.json(&Value::Array(v), a.compact);
-    Ok(())
-}
@@ -1,22 +0,0 @@
-use super::args::ConvertArgs;
-use super::error::Result;
-use super::output::{Streams, export_framed, export_window, skipped_message, undrawn_message};
-use super::{open, unicode};
-use cadcraft_engine::Session;
-
-pub(crate) fn convert(a: &ConvertArgs, io: &mut Streams) -> Result {
-    let i = unicode(&a.input)?;
-    let framing = a.framing.framing();
-    let mut s = Session::empty();
-    open(&mut s, &a.input)?;
-    if let Some(m) = skipped_message(s.doc()?, i) {
-        io.errln(format_args!("{m}"));
-    }
-    if cadcraft_io::is_image(&a.output)
-        && let Some(m) = undrawn_message(s.doc()?, i)
-    {
-        io.errln(format_args!("{m}"));
-    }
-    let window = export_window(&s, framing, None)?;
-    export_framed(&s, &a.output, window, io)
-}
@@ -1,29 +0,0 @@
-use crate::output::OutputError;
-use crate::perf::PerfError;
-use crate::run::RunError;
-
-/// Why a subcommand failed: printed as `error: {e}`, exit 1.
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum CliError {
-    #[error(transparent)]
-    Engine(#[from] cadcraft_engine::EngineError),
-    #[error(transparent)]
-    Doc(#[from] cadcraft_engine::doc::DocError),
-    #[error(transparent)]
-    Format(#[from] cadcraft_io::IoError),
-    #[error(transparent)]
-    Io(#[from] std::io::Error),
-    #[error(transparent)]
-    Run(#[from] RunError),
-    #[error(transparent)]
-    Output(#[from] OutputError),
-    #[error(transparent)]
-    Perf(#[from] PerfError),
-    /// The engine and io crates take file names as text.
-    #[error("{}: the file name is not valid Unicode", .0.display())]
-    NotUnicode(std::path::PathBuf),
-    #[error("cannot connect to {addr}: {source}")]
-    McpConnect { addr: String, source: std::io::Error },
-}
-
-pub(crate) type Result<T = (), E = CliError> = std::result::Result<T, E>;
@@ -1,14 +0,0 @@
-use super::args::InfoArgs;
-use super::error::Result;
-use super::open;
-use super::output::Streams;
-use cadcraft_engine::Session;
-use serde_json::json;
-
-pub(crate) fn info(a: &InfoArgs, io: &mut Streams) -> Result {
-    let mut s = Session::empty();
-    open(&mut s, &a.file)?;
-    let v = s.execute("drawing.inspect", &json!({ "entities": false }))?;
-    io.json(&v, a.compact);
-    Ok(())
-}
@@ -1,315 +0,0 @@
-//! `cadcraft-cli`: headless CADCraft. The subcommands and their options are the clap types in
-//! `args.rs`; `cadcraft-cli --help` lists them.
-#![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]
-
-use std::ffi::OsString;
-use std::io::Write;
-
-use cadcraft_engine::Session;
-use serde_json::json;
-
-mod args;
-mod commands;
-mod convert;
-mod error;
-mod info;
-mod mcp;
-mod output;
-mod perf;
-mod run;
-mod sample;
-
-#[cfg(test)]
-use args::Framing;
-use args::{Command, parse};
-use clap::CommandFactory;
-use commands::commands;
-use convert::convert;
-use error::Result;
-use info::info;
-use mcp::mcp;
-use output::Streams;
-#[cfg(test)]
-use output::{export_window, model_views, write_atomic};
-use perf::perf;
-use run::run_cmds;
-#[cfg(test)]
-use run::{fill_last, returned_handle};
-use sample::sample;
-
-fn install_io() {
-    cadcraft_engine::cmd::file::set_io(cadcraft_engine::cmd::file::IoHooks {
-        read: |b, name| cadcraft_io::read(b, name).map_err(|e| e.to_string()),
-        write: |d, name| cadcraft_io::write(d, name).map_err(|e| e.to_string()),
-        plot: Some(|d, space, opts| cadcraft_io::plotter::plot(d, space, opts).map_err(|e| e.to_string())),
-    });
-    cadcraft_engine::cmd::file::set_write_as(|d, name, o| {
-        cadcraft_io::write_with(d, name, &cadcraft_io::SaveOptions { version: o.version, binary: o.binary }).map_err(|e| e.to_string())
-    });
-    // AutoLISP's entget, entmake and entmod see entities as DXF groups.
-    cadcraft_engine::cmd::file::set_entity_codec(cadcraft_engine::cmd::file::EntityCodec {
-        groups: cadcraft_io::entity_groups,
-        entity: cadcraft_io::entity_from_groups,
-    });
-}
-
-/// `path` as text, for the engine and io calls that take a file name as a string.
-fn unicode(path: &std::path::Path) -> Result<&str> {
-    path.to_str().ok_or_else(|| error::CliError::NotUnicode(path.to_path_buf()))
-}
-
-fn open(s: &mut Session, path: &std::path::Path) -> Result {
-    s.execute("open", &json!({ "path": unicode(path)? }))?;
-    Ok(())
-}
-
-/// The command line's clap definition, for generating shell completions and man pages.
-pub fn command() -> clap::Command {
-    args::Cli::command()
-}
-
-/// Run the CLI on its arguments (without the program name). Returns the process exit code (0 ok,
-/// 1 failure, 2 usage). clap reads the arguments as they are: a value that is not valid Unicode
-/// is a usage error, never a panic as with `std::env::args()`.
-pub fn run<I, T>(args: I, out: &mut dyn Write, err: &mut dyn Write) -> i32
-where
-    I: IntoIterator<Item = T>,
-    T: Into<OsString>,
-{
-    let args: Vec<OsString> = args.into_iter().map(Into::into).collect();
-    // Help and `--version` (`help`, `-h`, `<subcommand> --help`, `-V`) come back as errors too,
-    // for `out`, exit 0: the subcommand never runs.
-    let cli = match parse(&args) {
-        Ok(cli) => cli,
-        Err(e) => {
-            let to: &mut dyn Write = if e.use_stderr() { err } else { out };
-            return match write!(to, "{}", e.render()) {
-                Err(w) if w.kind() != std::io::ErrorKind::BrokenPipe => {
-                    let _ = writeln!(err, "error: can't write the output: {w}");
-                    1
-                }
-                _ => e.exit_code(),
-            };
-        }
-    };
-    // The engine's hooks are set-once, so installing them on every call is harmless.
-    install_io();
-    match &cli.command {
-        Command::Convert(a) => a.settings.apply(),
-        Command::Run(a) => a.settings.apply(),
-        Command::Mcp(a) => a.settings.apply(),
-        Command::Sample(a) => a.settings.apply(),
-        Command::Info(_) | Command::Commands(_) | Command::Perf(_) => {}
-    }
-    let mut io = Streams::new(out, err);
-    let result = match &cli.command {
-        Command::Info(a) => info(a, &mut io),
-        Command::Convert(a) => convert(a, &mut io),
-        Command::Run(a) => run_cmds(a, &mut io),
-        Command::Commands(a) => commands(a, &mut io),
-        Command::Mcp(a) => mcp(a),
-        Command::Perf(a) => perf(a.target.as_ref(), &mut io),
-        Command::Sample(a) => sample(a, &mut io),
-    };
-    let mut code = 0;
-    if let Err(e) = result {
-        io.errln(format_args!("error: {e}"));
-        code = 1;
-    }
-    io.finish();
-    if io.stdout_failed() { 1 } else { code }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use cadcraft_engine::doc::Space;
-    use cadcraft_engine::geom::{Bounds2, Vec2};
-
-    fn scratch_dir(tag: &str) -> std::path::PathBuf {
-        let dir = std::env::temp_dir().join(format!("cadcraft-cli-{tag}-{}", std::process::id()));
-        let _ = std::fs::remove_dir_all(&dir);
-        std::fs::create_dir_all(&dir).expect("create scratch dir");
-        dir
-    }
-
-    struct FailingWriter(std::io::ErrorKind);
-
-    impl Write for FailingWriter {
-        fn write(&mut self, _: &[u8]) -> std::io::Result<usize> {
-            Err(self.0.into())
-        }
-        fn flush(&mut self) -> std::io::Result<()> {
-            Ok(())
-        }
-    }
-
-    #[test]
-    fn a_failed_write_of_help_exits_1_unless_the_pipe_is_closed() {
-        let mut err = Vec::new();
-        assert_eq!(run(["--help"], &mut FailingWriter(std::io::ErrorKind::StorageFull), &mut err), 1);
-        assert!(String::from_utf8_lossy(&err).starts_with("error: "));
-        assert_eq!(run(["--help"], &mut FailingWriter(std::io::ErrorKind::BrokenPipe), &mut Vec::new()), 0);
-    }
-
-    #[test]
-    fn write_atomic_replaces_file_and_leaves_no_staging_files() {
-        let dir = scratch_dir("replace");
-        let out = dir.join("a.dxf");
-        write_atomic(&out, b"old").expect("create");
-        write_atomic(&out, b"new").expect("overwrite");
-        assert_eq!(std::fs::read(&out).expect("read"), b"new");
-        assert_eq!(std::fs::read_dir(&dir).expect("list").count(), 1);
-        let _ = std::fs::remove_dir_all(&dir);
-    }
-
-    #[test]
-    fn write_atomic_failure_keeps_destination_and_cleans_up() {
-        let dir = scratch_dir("fail");
-        let out = dir.join("target");
-        std::fs::create_dir(&out).expect("dir as destination");
-        std::fs::write(out.join("keep"), b"x").expect("seed");
-        assert!(write_atomic(&out, b"new").is_err());
-        assert_eq!(std::fs::read(out.join("keep")).expect("kept"), b"x");
-        assert_eq!(std::fs::read_dir(&dir).expect("list").count(), 1);
-        let _ = std::fs::remove_dir_all(&dir);
-    }
-
-    fn b(x0: f64, y0: f64, x1: f64, y1: f64) -> Bounds2 {
-        Bounds2::new(Vec2::new(x0, y0), Vec2::new(x1, y1))
-    }
-
-    fn sample_session() -> Session {
-        let mut s = Session::empty();
-        s.open_drawing(cadcraft_engine::sample::default_sample(), "Bracket", None);
-        s
-    }
-
-    fn view_box(svg: &str) -> String {
-        let i = svg.find("viewBox=\"").map(|i| i + 9).unwrap_or(0);
-        svg[i..].split('"').next().unwrap_or("").to_string()
-    }
-
-    fn assert_near(a: Bounds2, e: Bounds2) {
-        let d = (a.min - e.min).len().max((a.max - e.max).len());
-        assert!(d < 1e-9, "{a:?} != {e:?}");
-    }
-
-    #[test]
-    fn last_placeholder_takes_the_previous_handle() {
-        let mut s = sample_session();
-        let r = s.execute("line", &json!({"points": [[0, 0], [10, 0]]})).unwrap();
-        let h = returned_handle(&s, &r).expect("LINE returns its handle");
-        assert_eq!(fill_last(&json!({"handle": "{last}"}), Some(h)).unwrap(), json!({"handle": h.hex()}));
-        // Nested, as in a selection list.
-        assert_eq!(fill_last(&json!({"handles": ["{last}", "1"]}), Some(h)).unwrap(), json!({"handles": [h.hex(), "1"]}));
-        // Only the exact token: a name or a sentence that merely contains it stays as written.
-        for p in [json!("last"), json!("{last} "), json!({"name": "last"})] {
-            assert_eq!(fill_last(&p, Some(h)).unwrap(), p);
-        }
-        // Nothing returned yet: an error, not a token passed to the command as a bad handle.
-        assert!(fill_last(&json!({"handle": "{last}"}), None).unwrap_err().to_string().contains("{last}"));
-    }
-
-    /// Handles are read from a result by looking the strings up in the drawing: counts and names
-    /// are not mistaken for handles, and `mview`'s `viewports` works like `handle`/`handles`.
-    #[test]
-    fn returned_handle_reads_only_real_handles() {
-        let mut s = Session::empty();
-        s.new_drawing(false);
-        s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
-        let r = s.execute("mview", &json!({"p1": [20, 20], "p2": [200, 150]})).unwrap();
-        let h = returned_handle(&s, &r).expect("mview returns its viewport handle");
-        assert!(r["viewports"].as_array().is_some_and(|a| a.iter().any(|v| v.as_str() == Some(h.hex().as_str()))), "{r}");
-        assert_eq!(returned_handle(&s, &json!({"changed": 3, "name": "A1"})), None);
-        // The most recent of several.
-        let a = s.execute("line", &json!({"points": [[0, 0], [1, 0]]})).unwrap();
-        let b = s.execute("line", &json!({"points": [[0, 0], [2, 0]]})).unwrap();
-        let (ha, hb) = (returned_handle(&s, &a).unwrap(), returned_handle(&s, &b).unwrap());
-        assert_eq!(returned_handle(&s, &json!({"handles": [ha.hex(), hb.hex()]})), Some(hb));
-    }
-
-    #[test]
-    fn default_framing_is_extents() {
-        // convert: nothing ran, always the extents.
-        let s = sample_session();
-        assert_eq!(export_window(&s, Framing::Auto, None).unwrap(), None);
-        // run: commands that leave the view alone keep the extents framing.
-        let mut s = sample_session();
-        let before = model_views(&s);
-        s.script("LINE 0,0 10,10\n\n").unwrap();
-        assert_eq!(export_window(&s, Framing::Auto, Some(&before)).unwrap(), None);
-        // A fresh drawing too.
-        let mut s = Session::empty();
-        s.new_drawing(false);
-        let before = model_views(&s);
-        s.execute("circle", &json!({"center": [0, 0], "radius": 5})).unwrap();
-        assert_eq!(export_window(&s, Framing::Auto, Some(&before)).unwrap(), None);
-    }
-
-    #[test]
-    fn zoom_window_frames_export() {
-        let mut s = sample_session();
-        let before = model_views(&s);
-        s.execute("zoom", &json!({"mode": "window", "p1": [0, 0], "p2": [30, 20]})).unwrap();
-        let w = export_window(&s, Framing::Auto, Some(&before)).unwrap().unwrap();
-        // The CLI viewport is 3:2, so a 3:2 window is shown exactly.
-        assert_near(w, b(0.0, 0.0, 30.0, 20.0));
-        assert_eq!(export_window(&s, Framing::Current, Some(&before)).unwrap(), Some(w));
-        // --view extents and --window override the zoom.
-        assert_eq!(export_window(&s, Framing::Extents, Some(&before)).unwrap(), None);
-        let explicit = b(1.0, 1.0, 2.0, 2.0);
-        assert_eq!(export_window(&s, Framing::Window(explicit), Some(&before)).unwrap(), Some(explicit));
-        // A taller window keeps its height; the 3:2 image adds room left and right.
-        s.execute("zoom", &json!({"mode": "center", "center": [5, 5], "height": 4})).unwrap();
-        assert_near(export_window(&s, Framing::Auto, Some(&before)).unwrap().unwrap(), b(2.0, 3.0, 8.0, 7.0));
-    }
-
-    #[test]
-    fn zoom_object_frames_the_selection() {
-        let mut s = sample_session();
-        let before = model_views(&s);
-        // The smallest entity with an area, selected then framed with ZOOM Object.
-        let d = s.doc().unwrap();
-        let bounds = |e: &cadcraft_engine::doc::Entity| cadcraft_engine::doc::entity_bounds(d, e, 0);
-        let e = d
-            .model
-            .iter()
-            .filter(|e| bounds(e).width() > 0.0 && bounds(e).height() > 0.0)
-            .min_by(|a, b| bounds(a).width().total_cmp(&bounds(b).width()))
-            .unwrap();
-        let (h, eb, ext) = (e.handle, bounds(e), d.extents(&Space::Model));
-        s.set_selection(vec![h]);
-        s.execute("zoom", &json!({"mode": "object"})).unwrap();
-        let w = export_window(&s, Framing::Auto, Some(&before)).unwrap().unwrap();
-        assert!(w.contains(eb.min) && w.contains(eb.max));
-        assert!(w.width() < ext.width() && w.height() < ext.height(), "{w:?} vs extents {ext:?}");
-    }
-
-    #[test]
-    fn run_export_honours_zoom() {
-        let dir = std::env::temp_dir().join(format!("cadcraft-cli-165-{}", std::process::id()));
-        std::fs::create_dir_all(&dir).unwrap();
-        let path = |n: &str| dir.join(n).to_string_lossy().to_string();
-        let run_svg = |extra: &[&str], out: &str| -> String {
-            let mut args: Vec<String> = ["run", "--sample"].iter().chain(extra).map(|a| a.to_string()).collect();
-            args.extend(["--export".to_string(), path(out)]);
-            assert_eq!(run(args, &mut Vec::new(), &mut Vec::new()), 0);
-            std::fs::read_to_string(path(out)).unwrap()
-        };
-        let base = run_svg(&[], "base.svg");
-        let zoomed = run_svg(&["--cmd", r#"zoom {"mode":"window","p1":[0,0],"p2":[30,20]}"#], "zoom.svg");
-        let window = run_svg(&["--window", "0,0,30,20"], "window.svg");
-        let forced = run_svg(&["--cmd", r#"zoom {"mode":"window","p1":[0,0],"p2":[30,20]}"#, "--view", "extents"], "forced.svg");
-        assert_ne!(view_box(&zoomed), view_box(&base));
-        assert_eq!(view_box(&zoomed), "0 0 30.000000 20.000000");
-        assert_eq!(zoomed, window);
-        assert_eq!(forced, base);
-        // Hostile --window: a usage error, nothing written.
-        let mut err = Vec::new();
-        assert_eq!(run(["run", "--sample", "--window", "0,0,NaN,1", "--export", &path("bad.png")], &mut Vec::new(), &mut err), 2);
-        assert!(String::from_utf8_lossy(&err).contains("--window"));
-        assert!(!dir.join("bad.png").exists());
-        let _ = std::fs::remove_dir_all(&dir);
-    }
-}
@@ -1,17 +0,0 @@
-use super::args::{McpArgs, McpTarget};
-use super::error::{CliError, Result};
-
-pub(crate) fn mcp(a: &McpArgs) -> Result {
-    let backend: Box<dyn cadcraft_mcp::Backend> = match a.target() {
-        McpTarget::Connect { addr, lazy: true, launch } => Box::new(cadcraft_mcp::Remote::lazy(&addr, launch)),
-        McpTarget::Connect { addr, .. } => match cadcraft_mcp::Remote::connect(&addr) {
-            Ok(r) => Box::new(r),
-            Err(source) => return Err(CliError::McpConnect { addr, source }),
-        },
-        McpTarget::Headless => Box::new(cadcraft_mcp::Headless::default()),
-    };
-    let stdin = std::io::stdin();
-    let stdout = std::io::stdout();
-    cadcraft_mcp::Server::new(backend).serve(stdin.lock(), stdout.lock())?;
-    Ok(())
-}
@@ -1,177 +0,0 @@
-use super::args::Framing;
-use super::error::Result;
-use cadcraft_engine::doc::Space;
-use cadcraft_engine::geom::{Bounds2, Vec2};
-use cadcraft_engine::{Session, View};
-use std::io::Write;
-use std::path::{Path, PathBuf};
-
-/// The process's output streams. A write to stdout that fails never stops the program: once
-/// stdout has failed, later output is dropped and the work goes on, so the rest of `run` (later
-/// `--cmd` results, `--save`, `--export`) still happens and `cadcraft-cli run … --save out.dxf |
-/// head` keeps the drawing. A reader that stopped early (a closed pipe, `cadcraft-cli commands |
-/// head`) is not an error, as in ripgrep; any other write error is reported once on stderr and
-/// makes the exit status 1.
-pub(crate) struct Streams<'a> {
-    out: &'a mut dyn Write,
-    err: &'a mut dyn Write,
-    /// Set once a write to `out` has failed; later output is dropped.
-    gone: bool,
-    /// Set when `out` failed for a reason other than a closed reader.
-    failed: bool,
-}
-
-impl<'a> Streams<'a> {
-    pub(crate) fn new(out: &'a mut dyn Write, err: &'a mut dyn Write) -> Self {
-        Streams { out, err, gone: false, failed: false }
-    }
-
-    /// Write a line to stdout.
-    pub(crate) fn outln(&mut self, args: std::fmt::Arguments) {
-        if !self.gone
-            && let Err(e) = writeln!(self.out, "{args}")
-        {
-            self.out_failed(e);
-        }
-    }
-
-    /// Write `v` to stdout: pretty-printed, or on one line with `compact` (`--compact`).
-    pub(crate) fn json(&mut self, v: &serde_json::Value, compact: bool) {
-        if compact {
-            self.outln(format_args!("{v}"));
-        } else {
-            self.outln(format_args!("{v:#}"));
-        }
-    }
-
-    /// Write a line to stderr. A failing stderr has nowhere to report to, so it is ignored.
-    pub(crate) fn errln(&mut self, args: std::fmt::Arguments) {
-        let _ = writeln!(self.err, "{args}");
-    }
-
-    /// Flush stdout (a pipe that closed during buffered output surfaces here).
-    pub(crate) fn finish(&mut self) {
-        if !self.gone
-            && let Err(e) = self.out.flush()
-        {
-            self.out_failed(e);
-        }
-    }
-
-    /// Whether stdout failed for a reason other than a closed reader: the exit status is 1.
-    pub(crate) fn stdout_failed(&self) -> bool {
-        self.failed
-    }
-
-    fn out_failed(&mut self, e: std::io::Error) {
-        if std::mem::replace(&mut self.gone, true) || e.kind() == std::io::ErrorKind::BrokenPipe {
-            return;
-        }
-        self.errln(format_args!("cadcraft-cli: can't write to stdout: {e}"));
-        self.failed = true;
-    }
-}
-
-/// Why writing or framing an output failed.
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum OutputError {
-    #[error("--view current: the drawing has no model-space view")]
-    NoModelView,
-    #[error("{}: {source}", path.display())]
-    Write { path: PathBuf, source: std::io::Error },
-}
-
-/// The model-space view of every open drawing, by drawing id (to tell whether commands changed it).
-pub(crate) fn model_views(s: &Session) -> Vec<(u64, Option<View>)> {
-    s.docs.iter().map(|st| (st.uid, st.views.iter().find(|(sp, _)| *sp == Space::Model).map(|(_, v)| *v))).collect()
-}
-
-/// The active drawing's current model-space view as a rectangle with the viewport's aspect ratio
-/// (the CLI viewport is 3:2 like the PNG export, so the image shows exactly this view).
-fn current_window(s: &Session) -> Option<Bounds2> {
-    let st = s.state().ok()?;
-    let v = st.views.iter().find(|(sp, _)| *sp == Space::Model).map(|(_, v)| *v)?;
-    let (w, h) = s.viewport_px;
-    let half = Vec2::new(v.height * w / h.max(1.0), v.height) * 0.5;
-    Some(Bounds2::new(v.center - half, v.center + half))
-}
-
-/// The window an image export shows, or `None` to fit the extents. `before` is [`model_views`]
-/// taken before the commands ran (`None` for `convert`, where nothing ran).
-pub(crate) fn export_window(s: &Session, framing: Framing, before: Option<&[(u64, Option<View>)]>) -> Result<Option<Bounds2>, OutputError> {
-    match framing {
-        Framing::Window(w) => Ok(Some(w)),
-        Framing::Extents => Ok(None),
-        Framing::Current => current_window(s).map(Some).ok_or(OutputError::NoModelView),
-        Framing::Auto => {
-            let Some(before) = before else { return Ok(None) };
-            let Ok(st) = s.state() else { return Ok(None) };
-            let now = model_views(s);
-            let was = before.iter().find(|(uid, _)| *uid == st.uid);
-            let is = now.iter().find(|(uid, _)| *uid == st.uid);
-            // Only a view the commands changed counts; a drawing opened by the commands keeps
-            // the extents framing.
-            match (was, is) {
-                (Some(a), Some(b)) if a.1 != b.1 => Ok(current_window(s)),
-                _ => Ok(None),
-            }
-        }
-    }
-}
-
-/// Write `bytes` to `out` through the engine's atomic writer (an exclusively created sibling file
-/// renamed over `out`), so a failed or interrupted write leaves the previous file untouched. An
-/// existing `out` is resolved first: the rename would otherwise replace a symlink with a file and
-/// leave the file it points to (`--in-place` through a link) unchanged.
-pub(crate) fn write_atomic(out: &Path, bytes: &[u8]) -> Result<(), OutputError> {
-    let target = std::fs::canonicalize(out).unwrap_or_else(|_| out.to_path_buf());
-    cadcraft_engine::atomic_write::write_atomic(&target, bytes).map_err(|source| OutputError::Write { path: out.to_path_buf(), source })
-}
-
-pub(crate) fn export(s: &Session, out: &Path, io: &mut Streams) -> Result {
-    export_framed(s, out, None, io)
-}
-
-pub(crate) fn export_framed(s: &Session, out: &Path, window: Option<Bounds2>, io: &mut Streams) -> Result {
-    let d = s.doc()?;
-    let bytes = cadcraft_io::write_framed(d, out, window)?;
-    write_atomic(out, &bytes)?;
-    io.errln(format_args!("wrote {} ({} bytes)", out.display(), bytes.len()));
-    if cadcraft_engine::cmd::file::drops_unknown(out) {
-        let lost = cadcraft_engine::cmd::file::not_saved(d);
-        if let Some(m) = cadcraft_engine::cmd::file::not_saved_message(&lost) {
-            io.errln(format_args!("{m}"));
-        }
-    }
-    Ok(())
-}
-
-/// The warning for the model-space entities of `path` an image can't show, by type (those kept
-/// as unknown objects, `Proxy` in `info`), or `None` when there are none.
-pub(crate) fn undrawn_message(d: &cadcraft_engine::doc::Drawing, path: &str) -> Option<String> {
-    let mut types: std::collections::BTreeMap<&str, usize> = std::collections::BTreeMap::new();
-    for e in d.model.iter() {
-        if let cadcraft_engine::doc::EntityKind::Unknown(u) = &e.kind {
-            let n = types.entry(u.dxf_type.as_str()).or_insert(0);
-            *n = n.saturating_add(1);
-        }
-    }
-    let n = types.values().fold(0usize, |a, n| a.saturating_add(*n));
-    if n == 0 {
-        return None;
-    }
-    let list: Vec<String> = types.iter().map(|(t, n)| format!("{t}: {n}")).collect();
-    let entities = if n == 1 { "entity" } else { "entities" };
-    Some(format!("{path}: {n} {entities} not drawn ({})", list.join(", ")))
-}
-
-/// The warning for the records of `path` the reader could not place, or `None` when there are none.
-pub(crate) fn skipped_message(d: &cadcraft_engine::doc::Drawing, path: &str) -> Option<String> {
-    let n = d.skipped_records.values().fold(0usize, |a, n| a.saturating_add(*n));
-    if n == 0 {
-        return None;
-    }
-    let list: Vec<String> = d.skipped_records.iter().map(|(section, n)| format!("{section}: {n}")).collect();
-    let records = if n == 1 { "record" } else { "records" };
-    Some(format!("{path}: {n} {records} could not be read and are left out ({})", list.join(", ")))
-}
@@ -1,196 +0,0 @@
-use super::args::PerfTarget;
-use super::error::Result;
-use super::open;
-use super::output::Streams;
-use cadcraft_engine::Session;
-
-/// Why `perf` cannot run.
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum PerfError {
-    #[error("perf: the drawing is empty")]
-    EmptyDrawing,
-}
-
-/// Small deterministic generator (xorshift64*) so perf runs are repeatable without a dependency.
-struct Rng(u64);
-
-impl Rng {
-    fn next(&mut self) -> f64 {
-        self.0 ^= self.0 >> 12;
-        self.0 ^= self.0 << 25;
-        self.0 ^= self.0 >> 27;
-        (self.0.wrapping_mul(0x2545_F491_4F6C_DD1D) >> 11) as f64 / (1u64 << 53) as f64
-    }
-    fn range(&mut self, lo: f64, hi: f64) -> f64 {
-        lo + (hi - lo) * self.next()
-    }
-}
-
-/// A synthetic drawing with `n` mixed entities (lines, circles, arcs, polylines, text) spread
-/// over a square whose side grows with sqrt(n), so density stays constant.
-fn synthetic(n: usize, side: f64) -> Result<cadcraft_engine::doc::Drawing, cadcraft_engine::doc::DocError> {
-    use cadcraft_engine::doc::{self as d, Common, EntityKind, Space};
-    use cadcraft_engine::geom::{PolyVertex, Vec2, Vec3};
-    let mut dr = d::Drawing::new_imperial();
-    let mut r = Rng(0x9E37_79B9_7F4A_7C15);
-    let v3 = |x: f64, y: f64| Vec3::new(x, y, 0.0);
-    for i in 0..n {
-        let (x, y) = (r.range(0.0, side), r.range(0.0, side));
-        let s = r.range(0.5, 8.0);
-        let kind = match i % 5 {
-            0 => EntityKind::Line(d::Line { a: v3(x, y), b: v3(x + r.range(-s, s), y + r.range(-s, s)) }),
-            1 => EntityKind::Circle(d::Circle { center: v3(x, y), radius: s * 0.5 }),
-            2 => EntityKind::Arc(d::Arc { center: v3(x, y), radius: s * 0.5, start: r.range(0.0, 3.0), end: r.range(3.2, 6.2) }),
-            3 => EntityKind::LwPolyline(d::LwPolyline {
-                vertices: (0..6)
-                    .map(|k| PolyVertex {
-                        p: Vec2::new(x + f64::from(k) * s * 0.3, y + r.range(-s, s) * 0.3),
-                        bulge: if k == 2 { 0.4 } else { 0.0 },
-                        start_width: 0.0,
-                        end_width: 0.0,
-                    })
-                    .collect(),
-                closed: i % 2 == 0,
-                const_width: 0.0,
-                elevation: 0.0,
-                plinegen: false,
-            }),
-            _ => EntityKind::Text(d::Text {
-                insert: v3(x, y),
-                align_pt: None,
-                height: s * 0.2,
-                value: format!("T{i}"),
-                rotation: 0.0,
-                width_factor: 1.0,
-                oblique: 0.0,
-                style: "Standard".into(),
-                halign: d::HAlign::Left,
-                valign: d::VAlign::Baseline,
-            }),
-        };
-        dr.add(&Space::Model, Common::default(), kind)?;
-    }
-    Ok(dr)
-}
-
-/// `perf FILE`: the display list built as the canvas builds it (a 1600 x 1000 px view at the
-/// drawing's centre: tolerance, dash level of detail and view window from the zoom band), at
-/// zoom extents and zoomed in 4x at a time, next to the full-detail build plots use.
-fn perf_file(path: &std::path::Path, io: &mut Streams) -> Result {
-    use cadcraft_engine::geom::{Bounds2, Vec2};
-    use cadcraft_engine::render::{Options, build};
-    use std::time::Instant;
-    let ms = |t: Instant| t.elapsed().as_secs_f64() * 1000.0;
-    let mut s = Session::empty();
-    let t = Instant::now();
-    open(&mut s, path)?;
-    let open_ms = ms(t);
-    let st = s.state()?;
-    let (d, space) = (&st.doc, &st.space);
-    let ext = d.extents(space);
-    let size = ext.width().max(ext.height());
-    if ext.is_empty() || !(size.is_finite() && size > 0.0) {
-        return Err(PerfError::EmptyDrawing.into());
-    }
-    io.outln(format_args!("open {open_ms:.0} ms, {} entities, extents {:.1} x {:.1}", d.entity_count(), ext.width(), ext.height()));
-    io.outln(format_args!("{:>8} {:>10} {:>10}", "zoom", "build ms", "prims"));
-    let mut finest = Options::default();
-    for k in 0..5 {
-        let zoom = 4f64.powi(k);
-        let h = size / zoom;
-        let pixel = 2f64.powi((h / 1000.0).max(1e-300).log2().floor() as i32);
-        let half = Vec2::new(h * 0.8, h * 0.5);
-        let visible = Bounds2::new(ext.center() - half, ext.center() + half);
-        let screen = Options { tolerance: pixel * 0.5, min_dash: pixel * 2.0, view: Some(visible.expand(h * 0.8)), ..Default::default() };
-        let t = Instant::now();
-        let n = build(d, space, &screen).prims.len();
-        io.outln(format_args!("{:>7}x {:>10.1} {n:>10}", zoom, ms(t)));
-        finest = screen;
-    }
-    // Plots: every pattern line, everywhere (last, so its large list doesn't weigh on the above).
-    let t = Instant::now();
-    let n = build(d, space, &Options { min_dash: 0.0, view: None, ..finest }).prims.len();
-    io.outln(format_args!("{:>8} {:>10.1} {n:>10}", "full", ms(t)));
-    Ok(())
-}
-
-pub(crate) fn perf(target: Option<&PerfTarget>, io: &mut Streams) -> Result {
-    use cadcraft_engine::doc::Space;
-    use cadcraft_engine::geom::{Bounds2, Vec2};
-    use cadcraft_engine::{select, snap};
-    use std::time::Instant;
-    let n = match target {
-        Some(PerfTarget::File(path)) => return perf_file(path, io),
-        Some(PerfTarget::Count(n)) => *n,
-        None => 200_000,
-    };
-    let side = (n as f64).sqrt() * 10.0;
-    let mut rows: Vec<(String, f64, String)> = Vec::new();
-    let ms = |t: Instant| t.elapsed().as_secs_f64() * 1000.0;
-
-    let t = Instant::now();
-    let d = synthetic(n, side)?;
-    rows.push(("build synthetic drawing".into(), ms(t), format!("{n} entities")));
-
-    // Display list at a 1600 px wide "zoom extents" view (tolerance = half a pixel).
-    let px = side / 1600.0;
-    let opts = cadcraft_engine::render::Options { tolerance: px * 0.5, min_dash: px * 2.0, ..Default::default() };
-    let t = Instant::now();
-    let list = cadcraft_engine::render::build(&d, &Space::Model, &opts);
-    rows.push(("display list build".into(), ms(t), format!("{} prims, {} segments", list.prims.len(), list.segment_count())));
-
-    // Hit testing on a zoomed-in view (aperture = 5 px at 0.02 units/px).
-    let ap = 0.1;
-    let mut r = Rng(42);
-    let pts: Vec<Vec2> = (0..1000).map(|_| Vec2::new(r.range(0.0, side), r.range(0.0, side))).collect();
-    let t = Instant::now();
-    let first = select::pick(&d, &Space::Model, pts.first().copied().unwrap_or(Vec2::ZERO), ap);
-    rows.push(("first pick (incl. index build)".into(), ms(t), format!("{first:?}")));
-    let t = Instant::now();
-    let hits = pts.iter().filter(|p| select::pick(&d, &Space::Model, **p, ap).is_some()).count();
-    let total = ms(t);
-    rows.push(("pick x1000".into(), total, format!("{hits} hits, {:.3} ms/pick", total / 1000.0)));
-
-    // One edit, then a pick: only the touched chunk is re-indexed.
-    let mut edited = d.clone();
-    if let Some(h) = edited.model.last().map(|e| e.handle) {
-        edited.model.modify(h, |e| e.common.layer = "0".into());
-    }
-    let t = Instant::now();
-    let _ = select::pick(&edited, &Space::Model, pts.first().copied().unwrap_or(Vec2::ZERO), ap);
-    rows.push(("pick after one edit (incremental re-index)".into(), ms(t), String::new()));
-
-    let mut sel = 0usize;
-    let t = Instant::now();
-    for k in 0..20 {
-        let c = Vec2::new(r.range(0.0, side), r.range(0.0, side));
-        let half = side * 0.05;
-        sel += select::select_window(&d, &Space::Model, Bounds2::new(c - Vec2::new(half, half), c + Vec2::new(half, half)), k % 2 == 1).len();
-    }
-    rows.push(("window/crossing select x20 (10% side)".into(), ms(t), format!("{sel} selected")));
-
-    let t = Instant::now();
-    let fence: Vec<Vec2> = (0..4).map(|_| Vec2::new(r.range(0.0, side), r.range(0.0, side))).collect();
-    let fsel = select::select_fence(&d, &Space::Model, &fence).len();
-    rows.push(("fence select (3 legs)".into(), ms(t), format!("{fsel} selected")));
-
-    let osmode = snap::mode::END | snap::mode::MID | snap::mode::CEN | snap::mode::QUA | snap::mode::INT;
-    let t = Instant::now();
-    let snaps = pts.iter().filter(|p| snap::osnap(&d, &Space::Model, **p, ap * 2.0, osmode, None, false).is_some()).count();
-    let total = ms(t);
-    rows.push(("osnap x1000".into(), total, format!("{snaps} hits, {:.3} ms/query", total / 1000.0)));
-
-    let t = Instant::now();
-    let bytes = cadcraft_io::write(&d, "perf.dxf")?;
-    rows.push(("DXF write".into(), ms(t), format!("{:.1} MB", bytes.len() as f64 / 1e6)));
-    let t = Instant::now();
-    let back = cadcraft_io::read(&bytes, "perf.dxf")?;
-    rows.push(("DXF read".into(), ms(t), format!("{} entities", back.entity_count())));
-
-    io.outln(format_args!("{:<40} {:>12}  notes", "operation", "ms"));
-    io.outln(format_args!("{}", "-".repeat(80)));
-    for (name, t, note) in rows {
-        io.outln(format_args!("{name:<40} {t:>12.2}  {note}"));
-    }
-    Ok(())
-}
@@ -1,223 +0,0 @@
-use super::args::{CmdStep, Drawing, RunArgs, Step};
-use super::error::Result;
-use super::open;
-use super::output::{Streams, export, export_framed, export_window, model_views};
-use cadcraft_engine::Session;
-use cadcraft_engine::doc::Handle;
-use serde_json::Value;
-
-/// A `--cmd` parameter value of exactly `{last}` is filled in with the last object handle an
-/// earlier `--cmd` in the same run returned: `mview` answers `{"viewports":["100"]}`, so
-/// `viewport.set {"handle":"{last}","scale":1}` changes viewport 100. Any other string is passed
-/// through unchanged, and `--script` text is never rewritten.
-const LAST_HANDLE: &str = "{last}";
-
-/// Why a `run` step fails.
-#[derive(Debug, thiserror::Error)]
-pub(crate) enum RunError {
-    #[error("{}: {source}", .path.display())]
-    ReadScript { path: std::path::PathBuf, source: std::io::Error },
-    #[error("--cmd {id}: {source}")]
-    CmdLast { id: String, source: NoLastHandle },
-}
-
-/// A `{last}` placeholder with no handle to fill in.
-#[derive(Debug, PartialEq, thiserror::Error)]
-#[error("`{{last}}` needs an earlier --cmd in this run to have returned a handle")]
-pub(crate) struct NoLastHandle;
-
-/// How deep [`result_handles`] walks a command result (results are the engine's own JSON).
-const RESULT_DEPTH: usize = 16;
-
-/// Result keys whose values are object references: the engine's result convention for handles.
-/// A handle can be a string (`handle`, `viewport`, `insert`…) or a list of them (`handles`,
-/// `viewports`, `members`…). Every other field may hold a user-defined name, a message or a
-/// count, and is never read as a handle — a group named `100` is a name, not object `100`.
-fn handle_field(key: &str) -> bool {
-    matches!(
-        key,
-        "handle"
-            | "handles"
-            | "viewport"
-            | "viewports"
-            | "boundary"
-            | "clip"
-            | "insert"
-            | "members"
-            | "source"
-            | "objects"
-            | "entities"
-            | "selection"
-            | "parts"
-            | "refs"
-            | "matches"
-            | "line"
-            | "arc"
-            | "blocks"
-    )
-}
-
-/// Collect the handles of `v`, a value under a handle field: a handle string, an array of them,
-/// or objects that carry handle fields of their own (`entities`, `parts`).
-fn collect_result_handles(s: &Session, v: &Value, depth: usize, out: &mut Vec<Handle>) {
-    if depth > RESULT_DEPTH {
-        return;
-    }
-    match v {
-        Value::String(t) => {
-            if let Some(h) = Handle::parse_hex(t)
-                && s.doc().is_ok_and(|d| d.entity(h).is_some())
-            {
-                out.push(h);
-            }
-        }
-        Value::Array(a) => a.iter().for_each(|x| collect_result_handles(s, x, depth + 1, out)),
-        Value::Object(m) => {
-            for (k, x) in m {
-                if handle_field(k) {
-                    collect_result_handles(s, x, depth + 1, out);
-                } else {
-                    find_result_handles(s, x, depth + 1, out);
-                }
-            }
-        }
-        _ => {}
-    }
-}
-
-/// Find handle fields nested in containers that are not handles themselves (`groups` in
-/// `groups.list`, whose members are handles): strings here are names, never references.
-fn find_result_handles(s: &Session, v: &Value, depth: usize, out: &mut Vec<Handle>) {
-    if depth > RESULT_DEPTH {
-        return;
-    }
-    match v {
-        Value::Array(a) => a.iter().for_each(|x| find_result_handles(s, x, depth + 1, out)),
-        Value::Object(m) => {
-            for (k, x) in m {
-                if handle_field(k) {
-                    collect_result_handles(s, x, depth + 1, out);
-                } else {
-                    find_result_handles(s, x, depth + 1, out);
-                }
-            }
-        }
-        _ => {}
-    }
-}
-
-/// The object handles a command result mentions, in the order it lists them. A handle-only result
-/// (a handle string or an array of them) counts as it is; otherwise only handle fields do.
-fn result_handles(s: &Session, v: &Value, depth: usize, out: &mut Vec<Handle>) {
-    match v {
-        Value::String(_) => collect_result_handles(s, v, depth, out),
-        Value::Array(a) if a.iter().all(Value::is_string) => collect_result_handles(s, v, depth, out),
-        Value::Array(_) | Value::Object(_) => find_result_handles(s, v, depth, out),
-        _ => {}
-    }
-}
-
-/// The last handle `r` returned: what a later `{last}` stands for.
-pub(crate) fn returned_handle(s: &Session, r: &Value) -> Option<Handle> {
-    let mut hs = Vec::new();
-    result_handles(s, r, 0, &mut hs);
-    hs.last().copied()
-}
-
-/// The active drawing's identity ([`cadcraft_engine::DocState::uid`]): a handle is only meaningful
-/// in the drawing it came from, and `new`, `open`, `document.switch` and `close` can make another
-/// drawing current.
-fn active_drawing(s: &Session) -> Option<u64> {
-    s.docs.get(s.active).map(|st| st.uid)
-}
-
-/// Every `{last}` in `p`, at any depth, replaced by `h`. With no handle to fill in it is an
-/// error, never a token reaching the command as a (bad) handle.
-pub(crate) fn fill_last(p: &Value, h: Option<Handle>) -> Result<Value, NoLastHandle> {
-    match p {
-        Value::String(t) if t.as_str() == LAST_HANDLE => match h {
-            Some(h) => Ok(Value::String(h.hex())),
-            None => Err(NoLastHandle),
-        },
-        Value::Array(a) => a.iter().map(|x| fill_last(x, h)).collect::<Result<Vec<_>, _>>().map(Value::Array),
-        Value::Object(m) => {
-            m.iter().map(|(k, x)| Ok((k.clone(), fill_last(x, h)?))).collect::<Result<serde_json::Map<String, Value>, _>>().map(Value::Object)
-        }
-        other => Ok(other.clone()),
-    }
-}
-
-/// A step ready to run: script text, or a command.
-enum Ready<'a> {
-    Script(String),
-    Cmd(&'a CmdStep),
-}
-
-pub(crate) fn run_cmds(a: &RunArgs, io: &mut Streams) -> Result {
-    let framing = a.framing.framing();
-    let (save, export_to) = (a.save.as_deref(), a.export.as_deref());
-    let mut s = Session::empty();
-    for d in &a.drawings {
-        match d {
-            Drawing::File(f) => open(&mut s, f)?,
-            Drawing::Sample => {
-                s.open_drawing(cadcraft_engine::sample::default_sample(), "Bracket", None);
-            }
-            Drawing::Metric => {
-                s.new_drawing(true);
-            }
-        }
-    }
-    let mut steps: Vec<Ready> = Vec::new();
-    for step in &a.steps {
-        steps.push(match step {
-            Step::Script(text) => Ready::Script(text.replace("\\n", "\n")),
-            Step::ScriptFile(p) => Ready::Script(std::fs::read_to_string(p).map_err(|source| RunError::ReadScript { path: p.clone(), source })?),
-            Step::Cmd(c) => Ready::Cmd(c),
-        });
-    }
-    if s.docs.is_empty() {
-        s.new_drawing(false);
-    }
-    let before = model_views(&s);
-    let mut last_handle: Option<Handle> = None;
-    for step in steps {
-        // A handle belongs to the drawing that returned it: if this step makes another drawing
-        // current (`new`, `open`, `document.switch`, `close`, or a script running one of them),
-        // the remembered handle is stale. A handle the step itself returns is taken afterwards,
-        // so it is a handle of the drawing it made current.
-        let drawing = active_drawing(&s);
-        match step {
-            Ready::Script(body) => {
-                s.script(&body)?;
-                if active_drawing(&s) != drawing {
-                    last_handle = None;
-                }
-            }
-            Ready::Cmd(CmdStep { id, params }) => {
-                let params = fill_last(params, last_handle).map_err(|source| RunError::CmdLast { id: id.clone(), source })?;
-                let r = s.execute(id, &params)?;
-                if active_drawing(&s) != drawing {
-                    last_handle = None;
-                }
-                if let Some(h) = returned_handle(&s, &r) {
-                    last_handle = Some(h);
-                }
-                if !r.is_null() {
-                    io.outln(format_args!("{r}"));
-                }
-            }
-        }
-    }
-    for l in &s.log {
-        io.errln(format_args!("{l}"));
-    }
-    if let Some(p) = save {
-        export(&s, p, io)?;
-    }
-    if let Some(p) = export_to {
-        let window = if cadcraft_io::is_image(p) { export_window(&s, framing, Some(&before))? } else { None };
-        export_framed(&s, p, window, io)?;
-    }
-    Ok(())
-}
@@ -1,14 +0,0 @@
-use super::args::{SampleArgs, SampleName};
-use super::error::Result;
-use super::output::{Streams, write_atomic};
-
-pub(crate) fn sample(a: &SampleArgs, io: &mut Streams) -> Result {
-    let d = match a.name {
-        SampleName::Bracket => cadcraft_engine::sample::bracket(),
-        SampleName::Floorplan => cadcraft_engine::sample::floor_plan(),
-    };
-    let bytes = cadcraft_io::write(&d, &a.output)?;
-    write_atomic(&a.output, &bytes)?;
-    io.errln(format_args!("wrote {} ({} bytes)", a.output.display(), bytes.len()));
-    Ok(())
-}
@@ -1,23 +1,23 @@
 //! `--help` is a request, not a failure (#1525): it goes to stdout with exit 0, like `--version`.
-//! Bare `cadcraft-cli` is a usage error: the help on stderr, exit 2.
+//! Bare `cadcraft-cli` keeps reporting on stderr with exit 1.

 use std::process::Command;

 #[test]
-fn help_flags_print_help_to_stdout_and_exit_zero() {
+fn help_flags_print_usage_to_stdout_and_exit_zero() {
    for args in [&["--help"][..], &["-h"], &["help"]] {
        let out = Command::new(env!("CARGO_BIN_EXE_cadcraft-cli")).args(args).output().expect("run cadcraft-cli");
        assert!(out.status.success(), "{args:?}: {:?}", out.status);
        let stdout = String::from_utf8_lossy(&out.stdout);
-        assert!(stdout.starts_with("cadcraft-cli: headless CADCraft\n"), "{args:?}: {stdout:?}");
+        assert!(stdout.starts_with("usage:"), "{args:?}: {stdout:?}");
        assert!(String::from_utf8_lossy(&out.stderr).is_empty(), "{args:?}: stderr should be empty");
    }
 }

 #[test]
-fn bare_invocation_reports_on_stderr() {
+fn bare_invocation_still_reports_on_stderr() {
    let out = Command::new(env!("CARGO_BIN_EXE_cadcraft-cli")).output().expect("run cadcraft-cli");
-    assert_eq!(out.status.code(), Some(2));
-    assert!(out.stdout.is_empty(), "bare invocation keeps its help on stderr");
-    assert!(String::from_utf8_lossy(&out.stderr).starts_with("cadcraft-cli: headless CADCraft\n"));
+    assert_eq!(out.status.code(), Some(1));
+    assert!(out.stdout.is_empty(), "bare invocation keeps its usage on stderr");
+    assert!(String::from_utf8_lossy(&out.stderr).starts_with("usage:"));
 }
@@ -4,4 +4,3 @@ mod help;
 mod mcp_connect;
 mod skipped_records;
 mod undrawn_entities;
-mod usage;
@@ -33,15 +33,12 @@ fn replies(out: &Output) -> Vec<Value> {
 #[test]
 fn connect_without_address_fails_before_serving() {
    let input = format!("{INIT}\n{CIRCLE}\n");
-    // clap names an unknown flag rather than the value it left missing.
-    for (args, named) in
-        [(&["--connect"][..], "--connect <HOST:PORT>"), (&["--connect", ""], "--connect <HOST:PORT>"), (&["--connect", "--foo"], "'--foo'")]
-    {
+    for args in [&["--connect"][..], &["--connect", ""], &["--connect", "--foo"]] {
        let out = mcp(args, &input);
-        assert_eq!(out.status.code(), Some(2), "{args:?} is a usage error");
+        assert!(!out.status.success(), "{args:?} must exit non-zero");
        assert!(out.stdout.is_empty(), "{args:?} must not answer MCP requests: {}", String::from_utf8_lossy(&out.stdout));
        let err = String::from_utf8_lossy(&out.stderr);
-        assert!(err.contains(named), "{args:?}: {err}");
+        assert!(err.contains("--connect needs HOST:PORT"), "{args:?}: {err}");
    }
 }

@@ -1,950 +0,0 @@
-//! The command line's behaviour: exit codes, streams and messages for help requests, unknown and
-//! malformed options, value flags in both spellings, repeats and arity. Every case goes through
-//! `invoke`, so the table rows are the record of what each input does. Usage errors are clap's
-//! (exit 2, stderr); a subcommand's own failures are `error: …` with exit 1.
-
-use std::path::{Path, PathBuf};
-
-struct Invoke {
-    code: i32,
-    stdout: String,
-    stderr: String,
-}
-
-fn invoke(args: &[&str]) -> Invoke {
-    let (mut out, mut err) = (Vec::new(), Vec::new());
-    let code = cadcraft_cli::run(args, &mut out, &mut err);
-    Invoke { code, stdout: String::from_utf8_lossy(&out).into_owned(), stderr: String::from_utf8_lossy(&err).into_owned() }
-}
-
-/// What a stream holds.
-#[derive(Clone, Copy)]
-enum Expect {
-    Empty,
-    /// The first line equals this.
-    Line(&'static str),
-    /// The first line starts with this.
-    Starts(&'static str),
-}
-
-use Expect::{Empty, Line, Starts};
-
-struct Case {
-    name: &'static str,
-    args: &'static [&'static str],
-    code: i32,
-    stdout: Expect,
-    stderr: Expect,
-}
-
-const fn case(name: &'static str, args: &'static [&'static str], code: i32, stdout: Expect, stderr: Expect) -> Case {
-    Case { name, args, code, stdout, stderr }
-}
-
-/// A scratch directory holding `b.dxf` (the bracket sample) and `s.scr` (a one-line script).
-struct Scratch(PathBuf);
-
-impl Scratch {
-    fn new(tag: &str) -> Scratch {
-        let dir = std::env::temp_dir().join(format!("cc-cli-usage-{tag}-{}", std::process::id()));
-        std::fs::create_dir_all(&dir).expect("create scratch dir");
-        let b = dir.join("b.dxf");
-        let r = invoke(&["sample", "bracket", b.to_str().expect("utf-8 path")]);
-        assert_eq!(r.code, 0, "{}", r.stderr);
-        std::fs::write(dir.join("s.scr"), "LINE 0,0 1,1\n").expect("write script");
-        Scratch(dir)
-    }
-
-    /// Replaces `{dir}` with the scratch directory and `{b}` with the sample drawing.
-    fn expand(&self, text: &str) -> String {
-        let dir = self.0.to_str().expect("utf-8 path");
-        text.replace("{b}", &Path::new(dir).join("b.dxf").to_string_lossy()).replace("{dir}", dir)
-    }
-}
-
-impl Drop for Scratch {
-    fn drop(&mut self) {
-        let _ = std::fs::remove_dir_all(&self.0);
-    }
-}
-
-fn check(what: &str, stream: &str, got: &str, expect: Expect, scratch: &Scratch) {
-    let first = got.lines().next().unwrap_or("");
-    match expect {
-        Empty => assert!(got.is_empty(), "{what}: {stream} should be empty, got {got:?}"),
-        Line(l) => assert_eq!(first, scratch.expand(l), "{what}: {stream}"),
-        Starts(p) => assert!(first.starts_with(&scratch.expand(p)), "{what}: {stream} should start with {p:?}, got {first:?}"),
-    }
-}
-
-fn run_cases(tag: &str, cases: &[Case]) {
-    let scratch = Scratch::new(tag);
-    for c in cases {
-        let args: Vec<String> = c.args.iter().map(|a| scratch.expand(a)).collect();
-        let args: Vec<&str> = args.iter().map(String::as_str).collect();
-        let what = format!("{}: {args:?}", c.name);
-        let r = invoke(&args);
-        assert_eq!(r.code, c.code, "{what}: exit code (stderr {:?})", r.stderr);
-        check(&what, "stdout", &r.stdout, c.stdout, &scratch);
-        check(&what, "stderr", &r.stderr, c.stderr, &scratch);
-    }
-}
-
-#[test]
-fn top_level_requests() {
-    run_cases(
-        "top",
-        &[
-            case("--help", &["--help"], 0, Line("cadcraft-cli: headless CADCraft"), Empty),
-            case("-h", &["-h"], 0, Line("cadcraft-cli: headless CADCraft"), Empty),
-            case("help", &["help"], 0, Line("cadcraft-cli: headless CADCraft"), Empty),
-            case("--version", &["--version"], 0, Starts("cadcraft-cli "), Empty),
-            case("-V", &["-V"], 0, Starts("cadcraft-cli "), Empty),
-            case("version is not a subcommand", &["version"], 2, Empty, Line("error: unrecognized subcommand 'version'")),
-            case("bare", &[], 2, Empty, Line("cadcraft-cli: headless CADCraft")),
-            case("unknown subcommand", &["foo"], 2, Empty, Line("error: unrecognized subcommand 'foo'")),
-            case("unknown top-level flag", &["--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("empty subcommand", &[""], 2, Empty, Line("error: unrecognized subcommand ''")),
-        ],
-    );
-}
-
-/// Each subcommand's help, from `--help`, `-h` or `help <subcommand>`: its first line is the
-/// subcommand's summary.
-#[test]
-fn subcommand_help_requests() {
-    run_cases(
-        "subhelp",
-        &[
-            case("info --help", &["info", "--help"], 0, Line("Print a drawing's summary as JSON"), Empty),
-            case("info -h", &["info", "-h"], 0, Line("Print a drawing's summary as JSON"), Empty),
-            case(
-                "convert --help",
-                &["convert", "--help"],
-                0,
-                Line("Convert a drawing; OUT's extension picks the format (dxf, dwg, dwt, svg, png, pdf)"),
-                Empty,
-            ),
-            case(
-                "convert -h",
-                &["convert", "-h"],
-                0,
-                Line("Convert a drawing; OUT's extension picks the format (dxf, dwg, dwt, svg, png, pdf)"),
-                Empty,
-            ),
-            case(
-                "run --help",
-                &["run", "--help"],
-                0,
-                Line("Open drawings (or start a new one), run scripts and commands in order, save or export the result"),
-                Empty,
-            ),
-            case(
-                "run -h",
-                &["run", "-h"],
-                0,
-                Line("Open drawings (or start a new one), run scripts and commands in order, save or export the result"),
-                Empty,
-            ),
-            case("commands --help", &["commands", "--help"], 0, Line("Print the command catalog as JSON"), Empty),
-            case(
-                "mcp --help",
-                &["mcp", "--help"],
-                0,
-                Line("Run the MCP server on stdio: a headless drawing session, or a bridge to the running app"),
-                Empty,
-            ),
-            case(
-                "perf --help",
-                &["perf", "--help"],
-                0,
-                Line(
-                    "Time the engine on a synthetic N-entity drawing (default 200000), or the canvas display-list build of a drawing, zoomed in step by step",
-                ),
-                Empty,
-            ),
-            case("sample --help", &["sample", "--help"], 0, Line("Write a built-in sample drawing"), Empty),
-            case(
-                "help run",
-                &["help", "run"],
-                0,
-                Line("Open drawings (or start a new one), run scripts and commands in order, save or export the result"),
-                Empty,
-            ),
-            case("help info", &["help", "info"], 0, Line("Print a drawing's summary as JSON"), Empty),
-            case(
-                "help after a flag missing its value",
-                &["run", "--sample", "--script", "--help"],
-                0,
-                Line("Open drawings (or start a new one), run scripts and commands in order, save or export the result"),
-                Empty,
-            ),
-            case(
-                "help after an unknown flag",
-                &["run", "--bogus", "--help"],
-                0,
-                Line("Open drawings (or start a new one), run scripts and commands in order, save or export the result"),
-                Empty,
-            ),
-            case("help after an extra argument", &["info", "{b}", "extra", "-h"], 0, Line("Print a drawing's summary as JSON"), Empty),
-            case("--help after -- is a file name", &["run", "--", "--help"], 1, Empty, Starts("error: invalid parameters for `open`: --help:")),
-            case("run --version", &["run", "--version"], 2, Empty, Line("error: unexpected argument '--version' found")),
-            case("info --version", &["info", "--version"], 2, Empty, Line("error: unexpected argument '--version' found")),
-        ],
-    );
-}
-
-#[test]
-fn unknown_flags_on_every_subcommand() {
-    run_cases(
-        "unknown",
-        &[
-            case("info", &["info", "{b}", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("info, flag first", &["info", "--bogus", "{b}"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("info, short flag", &["info", "-x"], 2, Empty, Line("error: unexpected argument '-x' found")),
-            case("info, a file name starting with - after --", &["info", "--", "-x"], 1, Empty, Starts("error: invalid parameters for `open`: -x:")),
-            case("convert", &["convert", "{b}", "{dir}/o.svg", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("run", &["run", "--sample", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("run, flag first", &["run", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("commands", &["commands", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("commands -- ends the options", &["commands", "--"], 0, Line("["), Empty),
-            case("mcp", &["mcp", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("mcp positional", &["mcp", "extra"], 2, Empty, Line("error: unexpected argument 'extra' found")),
-            case("perf", &["perf", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("sample", &["sample", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-            case("sample after name", &["sample", "bracket", "--bogus"], 2, Empty, Line("error: unexpected argument '--bogus' found")),
-        ],
-    );
-}
-
-/// `--x=v` is a spelling of `--x v`, and the one a value starting with `-` needs.
-#[test]
-fn value_flags_in_both_forms() {
-    run_cases(
-        "forms",
-        &[
-            case("--window v", &["convert", "{b}", "{dir}/w1.svg", "--window", "0,0,100,100"], 0, Empty, Starts("wrote {dir}/w1.svg (")),
-            case("--window=v", &["convert", "{b}", "{dir}/w2.svg", "--window=0,0,100,100"], 0, Empty, Starts("wrote {dir}/w2.svg (")),
-            case(
-                "run --window v",
-                &["run", "--sample", "--window", "0,0,100,100", "--export", "{dir}/w3.svg"],
-                0,
-                Empty,
-                Starts("wrote {dir}/w3.svg ("),
-            ),
-            case(
-                "run --window=v",
-                &["run", "--sample", "--window=0,0,100,100", "--export", "{dir}/w4.svg"],
-                0,
-                Empty,
-                Starts("wrote {dir}/w4.svg ("),
-            ),
-            case("--view v", &["convert", "{b}", "{dir}/v1.svg", "--view", "extents"], 0, Empty, Starts("wrote {dir}/v1.svg (")),
-            case("--view=v", &["convert", "{b}", "{dir}/v2.svg", "--view=extents"], 0, Empty, Starts("wrote {dir}/v2.svg (")),
-            case("run --view v", &["run", "--sample", "--view", "current", "--export", "{dir}/v3.svg"], 0, Empty, Starts("wrote {dir}/v3.svg (")),
-            case("run --view=v", &["run", "--sample", "--view=extents", "--export={dir}/v4.svg"], 0, Empty, Starts("wrote {dir}/v4.svg (")),
-            case("--script v", &["run", "--sample", "--script", "LINE 0,0 1,1"], 0, Empty, Line("Command: LINE")),
-            case("--script=v", &["run", "--sample", "--script=LINE 0,0 1,1"], 0, Empty, Line("Command: LINE")),
-            case("--script-file v", &["run", "--sample", "--script-file", "{dir}/s.scr"], 0, Empty, Starts("Command: LINE")),
-            case("--script-file=v", &["run", "--sample", "--script-file={dir}/s.scr"], 0, Empty, Starts("Command: LINE")),
-            case("--cmd v", &["run", "--sample", "--cmd", "nosuch"], 1, Empty, Line("error: unknown command `nosuch`")),
-            case("--cmd=v", &["run", "--sample", "--cmd=nosuch"], 1, Empty, Line("error: unknown command `nosuch`")),
-            case("--cmd=-v", &["run", "--sample", "--cmd=-x"], 1, Empty, Line("error: unknown command `-x`")),
-            case("--save v", &["run", "--sample", "--save", "{dir}/s1.dxf"], 0, Empty, Starts("wrote {dir}/s1.dxf (")),
-            case("--save=v", &["run", "--sample", "--save={dir}/s2.dxf"], 0, Empty, Starts("wrote {dir}/s2.dxf (")),
-            case("--export v", &["run", "--sample", "--export", "{dir}/e1.svg"], 0, Empty, Starts("wrote {dir}/e1.svg (")),
-            case("--export=v", &["run", "--sample", "--export={dir}/e2.svg"], 0, Empty, Starts("wrote {dir}/e2.svg (")),
-            case(
-                "--window=-v: negative coordinates need =",
-                &["convert", "{b}", "{dir}/w5.svg", "--window=-1000,-1000,1000,1000"],
-                0,
-                Empty,
-                Starts("wrote {dir}/w5.svg ("),
-            ),
-            case(
-                "--window -v: a value starting with - is a flag",
-                &["convert", "{b}", "{dir}/w6.svg", "--window", "-1000,-1000,1000,1000"],
-                2,
-                Empty,
-                Line("error: unexpected argument '-1' found"),
-            ),
-            case("--connect v", &["mcp", "--connect", "127.0.0.1:1"], 1, Empty, Starts("error: cannot connect to 127.0.0.1:1:")),
-            case("--connect=v", &["mcp", "--connect=127.0.0.1:1"], 1, Empty, Starts("error: cannot connect to 127.0.0.1:1:")),
-        ],
-    );
-}
-
-/// A value flag at the end of the arguments, or followed by another flag, is missing its value:
-/// a flag is never taken as a value.
-#[test]
-fn flags_missing_their_value() {
-    run_cases(
-        "missing",
-        &[
-            case(
-                "convert --window last",
-                &["convert", "{b}", "{dir}/o.svg", "--window"],
-                2,
-                Empty,
-                Line("error: a value is required for '--window <x0,y0,x1,y1>' but none was supplied"),
-            ),
-            case(
-                "convert --view last",
-                &["convert", "{b}", "{dir}/o.svg", "--view"],
-                2,
-                Empty,
-                Line("error: a value is required for '--view <extents|current>' but none was supplied"),
-            ),
-            case(
-                "convert --window then flag",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "--view", "extents"],
-                2,
-                Empty,
-                Line("error: a value is required for '--window <x0,y0,x1,y1>' but none was supplied"),
-            ),
-            case(
-                "convert --view then flag",
-                &["convert", "{b}", "{dir}/o.svg", "--view", "--window", "0,0,1,1"],
-                2,
-                Empty,
-                Line("error: a value is required for '--view <extents|current>' but none was supplied"),
-            ),
-            case(
-                "run --window last",
-                &["run", "--sample", "--window"],
-                2,
-                Empty,
-                Line("error: a value is required for '--window <x0,y0,x1,y1>' but none was supplied"),
-            ),
-            case(
-                "run --view last",
-                &["run", "--sample", "--view"],
-                2,
-                Empty,
-                Line("error: a value is required for '--view <extents|current>' but none was supplied"),
-            ),
-            case(
-                "run --script last",
-                &["run", "--sample", "--script"],
-                2,
-                Empty,
-                Line("error: a value is required for '--script <TEXT>' but none was supplied"),
-            ),
-            case(
-                "run --script then flag",
-                &["run", "--sample", "--script", "--sample"],
-                2,
-                Empty,
-                Line("error: a value is required for '--script <TEXT>' but none was supplied"),
-            ),
-            case(
-                "run --script-file last",
-                &["run", "--script-file"],
-                2,
-                Empty,
-                Line("error: a value is required for '--script-file <F.scr>' but none was supplied"),
-            ),
-            case(
-                "run --script-file then flag",
-                &["run", "--sample", "--script-file", "--sample"],
-                2,
-                Empty,
-                Line("error: a value is required for '--script-file <F.scr>' but none was supplied"),
-            ),
-            case(
-                "run --cmd last",
-                &["run", "--sample", "--cmd"],
-                2,
-                Empty,
-                Line("error: a value is required for '--cmd <id {json}>' but none was supplied"),
-            ),
-            case(
-                "run --cmd then flag",
-                &["run", "--sample", "--cmd", "--sample"],
-                2,
-                Empty,
-                Line("error: a value is required for '--cmd <id {json}>' but none was supplied"),
-            ),
-            case(
-                "run --save last",
-                &["run", "--sample", "--save"],
-                2,
-                Empty,
-                Line("error: a value is required for '--save <OUT.dxf>' but none was supplied"),
-            ),
-            case(
-                "run --export last",
-                &["run", "--sample", "--export"],
-                2,
-                Empty,
-                Line("error: a value is required for '--export <OUT.png>' but none was supplied"),
-            ),
-            case(
-                "mcp --connect last",
-                &["mcp", "--connect"],
-                2,
-                Empty,
-                Line("error: a value is required for '--connect <HOST:PORT>' but none was supplied"),
-            ),
-            case(
-                "mcp --connect then flag",
-                &["mcp", "--connect", "--lazy"],
-                2,
-                Empty,
-                Line("error: a value is required for '--connect <HOST:PORT>' but none was supplied"),
-            ),
-            case(
-                "mcp --connect empty",
-                &["mcp", "--connect", " "],
-                2,
-                Empty,
-                Line("error: invalid value ' ' for '--connect <HOST:PORT>': expected HOST:PORT (the app's --control port, e.g. 127.0.0.1:7979)"),
-            ),
-            case(
-                "mcp --connect without a port",
-                &["mcp", "--connect", "example.com"],
-                2,
-                Empty,
-                Line(
-                    "error: invalid value 'example.com' for '--connect <HOST:PORT>': expected HOST:PORT (the app's --control port, e.g. 127.0.0.1:7979)",
-                ),
-            ),
-            case(
-                "mcp --connect port out of range",
-                &["mcp", "--connect", "host:99999"],
-                2,
-                Empty,
-                Line(
-                    "error: invalid value 'host:99999' for '--connect <HOST:PORT>': expected HOST:PORT (the app's --control port, e.g. 127.0.0.1:7979)",
-                ),
-            ),
-            case(
-                "mcp --connect=-v",
-                &["mcp", "--connect=-v"],
-                2,
-                Empty,
-                Line("error: invalid value '-v' for '--connect <HOST:PORT>': expected HOST:PORT (the app's --control port, e.g. 127.0.0.1:7979)"),
-            ),
-        ],
-    );
-}
-
-#[test]
-fn repeated_and_combined_flags() {
-    run_cases(
-        "repeat",
-        &[
-            case(
-                "--save twice",
-                &["run", "--sample", "--save", "{dir}/a.dxf", "--save", "{dir}/b2.dxf"],
-                2,
-                Empty,
-                Line("error: the argument '--save <OUT.dxf>' cannot be used multiple times"),
-            ),
-            case(
-                "--export twice",
-                &["run", "--sample", "--export", "{dir}/x1.svg", "--export", "{dir}/x2.svg"],
-                2,
-                Empty,
-                Line("error: the argument '--export <OUT.png>' cannot be used multiple times"),
-            ),
-            case(
-                "--window twice",
-                &["run", "--sample", "--window", "0,0,1,1", "--window", "0,0,2,2", "--export", "{dir}/ww.svg"],
-                2,
-                Empty,
-                Line("error: the argument '--window <x0,y0,x1,y1>' cannot be used multiple times"),
-            ),
-            case(
-                "convert --window twice",
-                &["convert", "{b}", "{dir}/cw.svg", "--window", "0,0,1,1", "--window", "0,0,2,2"],
-                2,
-                Empty,
-                Line("error: the argument '--window <x0,y0,x1,y1>' cannot be used multiple times"),
-            ),
-            case(
-                "--view twice, different",
-                &["run", "--sample", "--view", "extents", "--view", "current", "--export", "{dir}/vv.svg"],
-                2,
-                Empty,
-                Line("error: the argument '--view <extents|current>' cannot be used multiple times"),
-            ),
-            case(
-                "--view twice, same",
-                &["run", "--sample", "--view", "extents", "--view", "extents", "--export", "{dir}/vs.svg"],
-                2,
-                Empty,
-                Line("error: the argument '--view <extents|current>' cannot be used multiple times"),
-            ),
-            case("--sample twice", &["run", "--sample", "--sample"], 2, Empty, Line("error: the argument '--sample' cannot be used multiple times")),
-            case("--metric twice", &["run", "--metric", "--metric"], 2, Empty, Line("error: the argument '--metric' cannot be used multiple times")),
-            case(
-                "--lazy twice",
-                &["mcp", "--connect", "127.0.0.1:1", "--lazy", "--lazy"],
-                2,
-                Empty,
-                Line("error: the argument '--lazy' cannot be used multiple times"),
-            ),
-            case(
-                "--launch twice",
-                &["mcp", "--connect", "127.0.0.1:1", "--launch", "--launch"],
-                2,
-                Empty,
-                Line("error: the argument '--launch' cannot be used multiple times"),
-            ),
-            case(
-                "--script, --script-file and --cmd repeat",
-                &[
-                    "run",
-                    "--sample",
-                    "--script",
-                    "LINE 0,0 1,1",
-                    "--script",
-                    "LINE 0,0 2,2",
-                    "--script-file",
-                    "{dir}/s.scr",
-                    "--script-file",
-                    "{dir}/s.scr",
-                ],
-                0,
-                Empty,
-                Starts("Command: LINE"),
-            ),
-            case(
-                "--window and --view",
-                &["run", "--sample", "--window", "0,0,1,1", "--view", "extents", "--export", "{dir}/wv.svg"],
-                2,
-                Empty,
-                Line("error: the argument '--window <x0,y0,x1,y1>' cannot be used with '--view <extents|current>'"),
-            ),
-            case(
-                "convert --window and --view",
-                &["convert", "{b}", "{dir}/cwv.svg", "--window", "0,0,1,1", "--view", "extents"],
-                2,
-                Empty,
-                Line("error: the argument '--window <x0,y0,x1,y1>' cannot be used with '--view <extents|current>'"),
-            ),
-            case(
-                "--view is case-insensitive",
-                &["run", "--sample", "--view", "EXTENTS", "--export", "{dir}/vu.svg"],
-                0,
-                Empty,
-                Starts("wrote {dir}/vu.svg ("),
-            ),
-            case(
-                "--connect twice",
-                &["mcp", "--connect", "127.0.0.1:1", "--connect", "127.0.0.1:2"],
-                2,
-                Empty,
-                Line("error: the argument '--connect <HOST:PORT>' cannot be used multiple times"),
-            ),
-            case("--lazy without --connect", &["mcp", "--lazy"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case("--launch without --connect", &["mcp", "--launch"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case("--sample --metric: both accepted", &["run", "--sample", "--metric"], 0, Empty, Empty),
-            case("--sample and a file", &["run", "--sample", "{b}"], 0, Empty, Empty),
-            case("two files", &["run", "{b}", "{b}"], 0, Empty, Empty),
-            case(
-                "--window without export",
-                &["run", "--sample", "--window", "0,0,1,1"],
-                2,
-                Empty,
-                Line("error: the following required arguments were not provided:"),
-            ),
-            case(
-                "--view without export",
-                &["run", "--sample", "--view", "current"],
-                2,
-                Empty,
-                Line("error: the following required arguments were not provided:"),
-            ),
-            case(
-                "--window with a dxf output",
-                &["convert", "{b}", "{dir}/o.dxf", "--window", "0,0,1,1"],
-                2,
-                Empty,
-                Line("error: --window only applies to image output (png, svg, pdf), not `{dir}/o.dxf`"),
-            ),
-            case(
-                "--view with a dxf output",
-                &["convert", "{b}", "{dir}/o.dxf", "--view", "extents"],
-                2,
-                Empty,
-                Line("error: --view only applies to image output (png, svg, pdf), not `{dir}/o.dxf`"),
-            ),
-            case(
-                "run --window with a dxf export",
-                &["run", "--sample", "--window", "0,0,1,1", "--export", "{dir}/o.dxf"],
-                2,
-                Empty,
-                Line("error: --window only applies to image output (png, svg, pdf), not `{dir}/o.dxf`"),
-            ),
-            case(
-                "run --view with a dxf export",
-                &["run", "--sample", "--view", "current", "--export", "{dir}/o.dxf"],
-                2,
-                Empty,
-                Line("error: --view only applies to image output (png, svg, pdf), not `{dir}/o.dxf`"),
-            ),
-        ],
-    );
-}
-
-#[test]
-fn arity_and_positional_arguments() {
-    run_cases(
-        "arity",
-        &[
-            case("info without a file", &["info"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case("info with two files", &["info", "{b}", "extra"], 2, Empty, Line("error: unexpected argument 'extra' found")),
-            case("info missing file", &["info", "missing.dxf"], 1, Empty, Starts("error: invalid parameters for `open`: missing.dxf:")),
-            case("convert with no files", &["convert"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case("convert with one file", &["convert", "{b}"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case(
-                "convert with three files",
-                &["convert", "{b}", "{dir}/o.svg", "{dir}/x.svg"],
-                2,
-                Empty,
-                Line("error: unexpected argument '{dir}/x.svg' found"),
-            ),
-            case("run missing file", &["run", "missing.dxf"], 1, Empty, Starts("error: invalid parameters for `open`: missing.dxf:")),
-            case("commands, no match", &["commands", "zzzznomatch"], 0, Line("[]"), Empty),
-            case(
-                "commands with an extra argument",
-                &["commands", "zzzznomatch", "extra"],
-                2,
-                Empty,
-                Line("error: unexpected argument 'extra' found"),
-            ),
-            case("sample without arguments", &["sample"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case("sample without an output", &["sample", "bracket"], 2, Empty, Line("error: the following required arguments were not provided:")),
-            case(
-                "sample with a bad name",
-                &["sample", "nosuch", "{dir}/o.dxf"],
-                2,
-                Empty,
-                Line("error: invalid value 'nosuch' for '<bracket|floorplan>'"),
-            ),
-            case(
-                "sample names are case-sensitive",
-                &["sample", "Bracket", "{dir}/o.dxf"],
-                2,
-                Empty,
-                Line("error: invalid value 'Bracket' for '<bracket|floorplan>'"),
-            ),
-            case(
-                "sample with an empty output",
-                &["sample", "bracket", ""],
-                2,
-                Empty,
-                Line("error: a value is required for '<OUT>' but none was supplied"),
-            ),
-            case("info with an empty file name", &["info", ""], 2, Empty, Line("error: a value is required for '<FILE>' but none was supplied")),
-            case("perf with an empty file name", &["perf", ""], 2, Empty, Line("error: a value is required for '[N|FILE]' but none was supplied")),
-            case(
-                "sample with an extra argument",
-                &["sample", "bracket", "{dir}/sx.dxf", "extra"],
-                2,
-                Empty,
-                Line("error: unexpected argument 'extra' found"),
-            ),
-            case("sample floor alias", &["sample", "floor", "{dir}/sf.dxf"], 0, Empty, Starts("wrote {dir}/sf.dxf (")),
-            case("sample with a bad extension", &["sample", "bracket", "{dir}/o.xyz"], 1, Empty, Line("error: unsupported file type `xyz`")),
-            case("perf with a word", &["perf", "abc"], 1, Empty, Starts("error: invalid parameters for `open`: abc:")),
-            case("perf with a negative number", &["perf", "-5"], 2, Empty, Line("error: unexpected argument '-5' found")),
-            case("perf with a missing file", &["perf", "missing.dxf"], 1, Empty, Starts("error: invalid parameters for `open`: missing.dxf:")),
-            case("perf 1", &["perf", "1"], 0, Starts("operation"), Empty),
-            case("perf 0 is raised to 1", &["perf", "0"], 0, Starts("operation"), Empty),
-            case("perf with two counts", &["perf", "1", "2"], 2, Empty, Line("error: unexpected argument '2' found")),
-        ],
-    );
-}
-
-#[test]
-fn bad_values() {
-    run_cases(
-        "values",
-        &[
-            case(
-                "--view sideways",
-                &["convert", "{b}", "{dir}/o.svg", "--view", "sideways"],
-                2,
-                Empty,
-                Line("error: invalid value 'sideways' for '--view <extents|current>'"),
-            ),
-            case(
-                "run --view sideways",
-                &["run", "--sample", "--view", "sideways"],
-                2,
-                Empty,
-                Line("error: invalid value 'sideways' for '--view <extents|current>'"),
-            ),
-            case(
-                "--view sideways before the output check",
-                &["convert", "{b}", "{dir}/o.dxf", "--view", "sideways"],
-                2,
-                Empty,
-                Line("error: invalid value 'sideways' for '--view <extents|current>'"),
-            ),
-            case(
-                "--window 3 numbers",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "1,2,3"],
-                2,
-                Empty,
-                Line("error: invalid value '1,2,3' for '--window <x0,y0,x1,y1>': expected four numbers x0,y0,x1,y1"),
-            ),
-            case(
-                "--window 5 numbers",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "1,2,3,4,5"],
-                2,
-                Empty,
-                Line("error: invalid value '1,2,3,4,5' for '--window <x0,y0,x1,y1>': expected four numbers x0,y0,x1,y1"),
-            ),
-            case(
-                "--window reversed",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "3,3,1,1"],
-                2,
-                Empty,
-                Line("error: invalid value '3,3,1,1' for '--window <x0,y0,x1,y1>': need x0 < x1 and y0 < y1 (lower-left corner first)"),
-            ),
-            case(
-                "--window not numbers",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "a,b,c,d"],
-                2,
-                Empty,
-                Line("error: invalid value 'a,b,c,d' for '--window <x0,y0,x1,y1>': x0 must be a finite number, got `a`"),
-            ),
-            case(
-                "--window NaN",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "NaN,0,1,1"],
-                2,
-                Empty,
-                Line("error: invalid value 'NaN,0,1,1' for '--window <x0,y0,x1,y1>': x0 must be a finite number, got `NaN`"),
-            ),
-            case(
-                "--window too large",
-                &["convert", "{b}", "{dir}/o.svg", "--window", "0,0,1e13,1"],
-                2,
-                Empty,
-                Line("error: invalid value '0,0,1e13,1' for '--window <x0,y0,x1,y1>': export window: coordinates must lie within ±1e12"),
-            ),
-            case(
-                "run --window 3 numbers",
-                &["run", "--sample", "--window", "1,2,3", "--export", "{dir}/o.svg"],
-                2,
-                Empty,
-                Line("error: invalid value '1,2,3' for '--window <x0,y0,x1,y1>': expected four numbers x0,y0,x1,y1"),
-            ),
-            case(
-                "run --window reversed",
-                &["run", "--sample", "--window", "3,3,1,1", "--export", "{dir}/o.svg"],
-                2,
-                Empty,
-                Line("error: invalid value '3,3,1,1' for '--window <x0,y0,x1,y1>': need x0 < x1 and y0 < y1 (lower-left corner first)"),
-            ),
-            case(
-                "--cmd bad json",
-                &["run", "--sample", "--cmd", "line {bad json"],
-                2,
-                Empty,
-                Line("error: invalid value 'line {bad json' for '--cmd <id {json}>': key must be a string at line 1 column 2"),
-            ),
-            case(
-                "--cmd bad json after a good step: nothing runs",
-                &["run", "--sample", "--cmd", "line {\"points\":[[0,0],[1,1]]}", "--cmd", "line {"],
-                2,
-                Empty,
-                Starts("error: invalid value 'line {' for '--cmd <id {json}>': "),
-            ),
-            case(
-                "--cmd without an id",
-                &["run", "--sample", "--cmd", " {}"],
-                2,
-                Empty,
-                Line("error: invalid value ' {}' for '--cmd <id {json}>': expected a command id, then optionally its JSON parameters"),
-            ),
-            case(
-                "--cmd empty",
-                &["run", "--sample", "--cmd="],
-                2,
-                Empty,
-                Line("error: invalid value '' for '--cmd <id {json}>': expected a command id, then optionally its JSON parameters"),
-            ),
-            case("--cmd unknown id", &["run", "--sample", "--cmd", "nosuch"], 1, Empty, Line("error: unknown command `nosuch`")),
-            case(
-                "--cmd {last} with no earlier handle",
-                &["run", "--sample", "--cmd", "erase {\"handles\":[\"{last}\"]}"],
-                1,
-                Empty,
-                Line("error: --cmd erase: `{last}` needs an earlier --cmd in this run to have returned a handle"),
-            ),
-            case("--script-file missing", &["run", "--sample", "--script-file", "missing.scr"], 1, Empty, Starts("error: missing.scr:")),
-        ],
-    );
-}
-
-/// `mcp` serves on the process's real stdin and stdout, so the headless server runs through the
-/// binary, with a closed stdin.
-#[test]
-fn mcp_headless_with_a_closed_stdin() {
-    let out = std::process::Command::new(env!("CARGO_BIN_EXE_cadcraft-cli"))
-        .arg("mcp")
-        .stdin(std::process::Stdio::null())
-        .output()
-        .expect("run cadcraft-cli");
-    assert_eq!(out.status.code(), Some(0));
-    assert!(out.stdout.is_empty() && out.stderr.is_empty());
-}
-
-/// A drawing to open whose name isn't valid Unicode reaches the handler as a path; the engine opens
-/// files by text name, so it is refused there (exit 1), naming the file. Text that isn't Unicode is
-/// a usage error.
-#[cfg(unix)]
-#[test]
-fn non_unicode_arguments() {
-    use std::ffi::OsString;
-    use std::os::unix::ffi::OsStringExt;
-    let invoke_os = |args: Vec<OsString>| {
-        let (mut out, mut err) = (Vec::new(), Vec::new());
-        let code = cadcraft_cli::run(args, &mut out, &mut err);
-        assert!(out.is_empty());
-        (code, String::from_utf8_lossy(&err).into_owned())
-    };
-    let latin1 = || OsString::from_vec(b"caf\xe9.dxf".to_vec());
-    let (code, err) = invoke_os(vec![OsString::from("info"), latin1()]);
-    assert_eq!(code, 1);
-    assert_eq!(err.lines().next(), Some("error: caf\u{FFFD}.dxf: the file name is not valid Unicode"));
-    let (code, err) = invoke_os(vec![OsString::from("run"), OsString::from("--sample"), OsString::from("--cmd"), latin1()]);
-    assert_eq!(code, 2);
-    assert!(err.starts_with("error: invalid UTF-8 was detected"), "{err}");
-}
-
-/// An output name that isn't valid Unicode is written as given: only its extension picks the format.
-#[cfg(unix)]
-#[test]
-fn non_unicode_output_names() {
-    use std::ffi::OsString;
-    use std::os::unix::ffi::OsStringExt;
-    let s = Scratch::new("nonunicode-out");
-    let latin1 = |ext: &str| {
-        let mut n = b"caf\xe9.".to_vec();
-        n.extend_from_slice(ext.as_bytes());
-        s.0.join(OsString::from_vec(n))
-    };
-    let run = |args: Vec<OsString>| {
-        let (mut out, mut err) = (Vec::new(), Vec::new());
-        let code = cadcraft_cli::run(args, &mut out, &mut err);
-        (code, String::from_utf8_lossy(&err).into_owned())
-    };
-    let b = s.0.join("b.dxf");
-    let cases: [(Vec<OsString>, std::path::PathBuf); 3] = [
-        (vec!["sample".into(), "bracket".into(), latin1("dxf").into()], latin1("dxf")),
-        (vec!["convert".into(), b.clone().into(), latin1("svg").into()], latin1("svg")),
-        (vec!["run".into(), "--sample".into(), "--save".into(), latin1("dwg").into()], latin1("dwg")),
-    ];
-    for (args, path) in cases {
-        let (code, err) = run(args.clone());
-        assert_eq!(code, 0, "{args:?}: {err}");
-        assert!(path.exists(), "{path:?}");
-        assert!(std::fs::metadata(&path).expect("stat output").len() > 0, "{path:?}");
-    }
-    // An input with such a name is still refused.
-    let (code, err) = run(vec!["info".into(), latin1("dxf").into()]);
-    assert_eq!(code, 1);
-    assert!(err.contains("not valid Unicode"), "{err}");
-}
-
-/// An output that is an input file is refused before any work (exit 2, the input untouched) unless
-/// `--in-place` allows it; the same file under another spelling counts, another existing file doesn't.
-#[test]
-fn output_that_replaces_an_input() {
-    let s = Scratch::new("inplace");
-    let dir = s.0.to_str().expect("utf-8 path").to_string();
-    let b = format!("{dir}/b.dxf");
-    let original = std::fs::read(&b).expect("read input");
-    std::fs::create_dir_all(format!("{dir}/sub")).expect("create sub");
-    let dotted = format!("{dir}/sub/../b.dxf");
-    #[allow(unused_mut)]
-    let mut spellings = vec![b.clone(), dotted];
-    #[cfg(unix)]
-    {
-        let link = format!("{dir}/link.dxf");
-        std::os::unix::fs::symlink(&b, &link).expect("symlink");
-        spellings.push(link);
-    }
-    for out in &spellings {
-        for args in [vec!["convert", &b, out], vec!["run", &b, "--save", out], vec!["run", &b, "--export", out]] {
-            let r = invoke(&args);
-            assert_eq!(r.code, 2, "{args:?}: {}", r.stderr);
-            assert!(r.stdout.is_empty(), "{args:?}");
-            assert!(r.stderr.starts_with(&format!("error: {out} is an input file")), "{args:?}: {}", r.stderr);
-            assert!(r.stderr.contains("--in-place"), "{args:?}: {}", r.stderr);
-            assert_eq!(std::fs::read(&b).expect("read input"), original, "{args:?}: input changed");
-        }
-    }
-
-    // Another existing file is replaced as before.
-    let other = format!("{dir}/other.dxf");
-    std::fs::write(&other, "x").expect("write other");
-    let r = invoke(&["convert", &b, &other]);
-    assert_eq!(r.code, 0, "{}", r.stderr);
-    assert_ne!(std::fs::read(&other).expect("read other"), b"x");
-
-    // --in-place allows it, for each spelling and flag: the input itself is rewritten, and a
-    // symlink stays a link to it.
-    let line = "line {\"points\":[[0,0],[1,1]]}";
-    let lines = |p: &str| std::fs::read_to_string(p).expect("read input").lines().filter(|l| l.trim_end() == "LINE").count();
-    let before = lines(&b);
-    for out in &spellings {
-        std::fs::write(&b, &original).expect("restore input");
-        let r = invoke(&["convert", &b, out, "--in-place"]);
-        assert_eq!(r.code, 0, "convert {out}: {}", r.stderr);
-        assert_eq!(lines(&b), before, "convert {out} keeps the drawing");
-        for flag in ["--save", "--export"] {
-            std::fs::write(&b, &original).expect("restore input");
-            let r = invoke(&["run", &b, "--cmd", line, "--in-place", flag, out]);
-            assert_eq!(r.code, 0, "{flag} {out}: {}", r.stderr);
-            assert_eq!(lines(&b), before + 1, "{flag} {out}: the input gains the line");
-        }
-    }
-    #[cfg(unix)]
-    {
-        let link = format!("{dir}/link.dxf");
-        assert!(std::fs::symlink_metadata(&link).expect("stat link").file_type().is_symlink(), "{link} is still a symlink");
-    }
-
-    // An output that doesn't exist yet is never an input.
-    let new = format!("{dir}/new.dxf");
-    let r = invoke(&["run", &b, "--save", &new]);
-    assert_eq!(r.code, 0, "{}", r.stderr);
-    assert!(std::path::Path::new(&new).is_file(), "{new} written");
-}
-
-/// JSON results are pretty-printed; `--compact` puts each on one line (RFC-0012 rule 1.3). `run`
-/// prints one line per `--cmd` result either way.
-#[test]
-fn json_output_is_pretty_unless_compact() {
-    let s = Scratch::new("compact");
-    let b = format!("{}/b.dxf", s.0.to_str().expect("utf-8 path"));
-    for args in [&["info", b.as_str()][..], &["commands", "ellipse"]] {
-        let help = invoke(&[args[0], "--help"]);
-        assert!(
-            help.stdout.contains("--compact") && help.stdout.contains("One line of JSON instead of pretty-printed"),
-            "{} --help: {}",
-            args[0],
-            help.stdout
-        );
-        let pretty = invoke(args);
-        assert_eq!(pretty.code, 0, "{args:?}: {}", pretty.stderr);
-        assert!(pretty.stdout.lines().count() > 1, "{args:?} is pretty-printed: {}", pretty.stdout);
-        let compact = invoke(&[args, &["--compact"]].concat());
-        assert_eq!(compact.code, 0, "{args:?} --compact: {}", compact.stderr);
-        assert_eq!(compact.stdout.lines().count(), 1, "{args:?} --compact is one line: {}", compact.stdout);
-        let a: serde_json::Value = serde_json::from_str(&pretty.stdout).expect("pretty JSON");
-        let c: serde_json::Value = serde_json::from_str(&compact.stdout).expect("compact JSON");
-        assert_eq!(a, c, "{args:?}: same JSON either way");
-    }
-    let r = invoke(&["run", "--sample", "--cmd", "drawing.inspect", "--cmd", "drawing.inspect"]);
-    assert_eq!(r.code, 0, "{}", r.stderr);
-    assert_eq!(r.stdout.lines().count(), 2, "one line per --cmd result: {}", r.stdout);
-    assert_eq!(invoke(&["run", "--sample", "--compact"]).code, 2, "run takes no --compact");
-}
@@ -1,30 +0,0 @@
-//! The clap definition is consistent, and `examples/man-and-completions.rs` writes every shell's
-//! completions and every man page under the names `packaging/linux/package.sh` installs.
-
-// The example itself, so the test runs its code; its `main` is unused here.
-#[allow(dead_code)]
-#[path = "../examples/man-and-completions.rs"]
-mod example;
-
-#[test]
-fn command_is_consistent() {
-    cadcraft_cli::command().debug_assert();
-}
-
-#[test]
-fn the_example_writes_the_files_the_packages_install() {
-    let dir = std::path::Path::new(env!("CARGO_TARGET_TMPDIR")).join(format!("man-and-completions-{}", std::process::id()));
-    let _ = std::fs::remove_dir_all(&dir);
-    example::generate(&dir).unwrap();
-
-    let mut written: Vec<String> = std::fs::read_dir(&dir).unwrap().map(|e| e.unwrap().file_name().into_string().unwrap()).collect();
-    written.sort();
-    let completions = ["cadcraft-cli.bash", "_cadcraft-cli", "cadcraft-cli.fish", "cadcraft-cli.elv", "_cadcraft-cli.ps1"];
-    let subcommands = ["info", "convert", "run", "commands", "mcp", "perf", "sample"];
-    let mut expected: Vec<String> = completions.map(String::from).into();
-    expected.push("cadcraft-cli.1".into());
-    expected.extend(subcommands.iter().map(|s| format!("cadcraft-cli-{s}.1")));
-    expected.sort();
-    assert_eq!(written, expected);
-    std::fs::remove_dir_all(&dir).unwrap();
-}
@@ -21,8 +21,6 @@ eframe = { workspace = true, features = ["clipboard", "wgpu", "accesskit", "wayl
 egui = { workspace = true }
 serde_json = { workspace = true }
 log = { workspace = true }
-clap = { workspace = true }
-thiserror = { workspace = true }
 chrono = { workspace = true }

 [build-dependencies]
@@ -36,16 +34,11 @@ winit = { version = "0.30", default-features = false, features = ["x11"] }
 zbus = { version = "=5.19.0", default-features = false, features = ["async-io", "blocking-api"] }

 [target.'cfg(not(target_arch = "wasm32"))'.dependencies]
-# Floating panels open in their own OS windows on the desktop; the web build keeps them in the page.
-craft-ui = { workspace = true, features = ["native-windows"] }
 craft-update = { workspace = true }
 rfd = { workspace = true }
 sys-locale = "0.3"

 [target.'cfg(target_os = "macos")'.dependencies]
-# `title_bar::sync_movable`: AppKit's title-band drag leaves the window still under the row's
-# controls and under floating panels.
-craft-window = { workspace = true }
 muda = { version = "0.21", default-features = false }
 # View ▸ Accessibility ▸ Animation Effects ▸ Use System Setting: the system's Reduce motion
 # (system_animations.rs). Already in Cargo.lock through muda.
@@ -1,172 +0,0 @@
-//! The `CADCRAFT_*` variables of the desktop app, read once at startup into [`Env`] and passed on
-//! from there; no library crate reads them. `--help` lists them from [`VARS`]. `--control`'s
-//! fallback, `CADCRAFT_CONTROL_PORT`, is clap's (see `launch_args`).
-
-use std::ffi::OsString;
-use std::fmt::Write as _;
-use std::path::PathBuf;
-
-use cadcraft_ui_egui::switch::Switch;
-
-const CONFIG_DIR: &str = "CADCRAFT_CONFIG_DIR";
-const LOCALE: &str = "CADCRAFT_LOCALE";
-const VSYNC: &str = "CADCRAFT_VSYNC";
-const WAYLAND: &str = "CADCRAFT_WAYLAND";
-const NO_NATIVE_MENU: &str = "CADCRAFT_NO_NATIVE_MENU";
-const SYSTEM_CURSOR: &str = "CADCRAFT_SYSTEM_CURSOR";
-const FONTALT: &str = "CADCRAFT_FONTALT";
-const FONTFALLBACK: &str = "CADCRAFT_FONTFALLBACK";
-
-/// Every variable [`Env`] reads, with its `--help` line.
-pub(crate) const VARS: &[(&str, &str)] = &[
-    (CONFIG_DIR, "the settings folder (logs, autosave, workspace, plotters); empty means no settings folder"),
-    (LOCALE, "the interface language, instead of the system's"),
-    (VSYNC, "1 presents with vsync, 0 without it (default: without on Linux and BSD)"),
-    (WAYLAND, "1 keeps the native Wayland backend instead of XWayland; 0 or unset is off"),
-    (NO_NATIVE_MENU, "macOS: 1 keeps the menus inside the window; 0 or unset is off"),
-    (SYSTEM_CURSOR, "1 uses the system cursor instead of the drawn crosshair; 0 or unset is off"),
-    (FONTALT, "the font that replaces a missing one"),
-    (FONTFALLBACK, "the fonts tried, in order, for characters a font lacks"),
-];
-
-/// The process environment, read once at startup. A blank variable counts as unset, except
-/// `CADCRAFT_CONFIG_DIR`.
-#[derive(Debug, PartialEq)]
-pub(crate) struct Env {
-    /// The settings folder (logs, autosave, workspace, plotters): `CADCRAFT_CONFIG_DIR`; else, when
-    /// that is unset, the platform's (`cadcraft_engine::settings_dir::platform`). `None`: no
-    /// folder, because the variable is empty or blank (the way to run without one) or the
-    /// platform has none.
-    pub(crate) config_dir: Option<PathBuf>,
-    /// The interface language, instead of the system's.
-    pub(crate) locale: Option<String>,
-    /// Present with vsync (default: off on Linux and BSD, on elsewhere).
-    pub(crate) vsync: Switch,
-    /// Keep the native Wayland backend instead of XWayland.
-    #[cfg_attr(not(all(unix, not(target_os = "macos"))), allow(dead_code))]
-    pub(crate) wayland: Switch,
-    /// macOS: keep the menus inside the window.
-    #[cfg_attr(not(target_os = "macos"), allow(dead_code))]
-    pub(crate) no_native_menu: Switch,
-    /// Use the system cursor instead of the drawn crosshair.
-    pub(crate) system_cursor: Switch,
-    /// FONTALT at startup.
-    pub(crate) font_alt: Option<String>,
-    /// FONTFALLBACK at startup.
-    pub(crate) font_fallback: Option<String>,
-}
-
-impl Env {
-    pub(crate) fn read() -> Env {
-        Env::from_vars(|k| std::env::var_os(k))
-    }
-
-    /// [`Env::read`] with `var` looking a variable up.
-    pub(crate) fn from_vars(var: impl Fn(&str) -> Option<OsString>) -> Env {
-        let text = |k: &str| var(k).and_then(|v| v.into_string().ok()).filter(|v| !v.trim().is_empty());
-        let switch = |k: &str| Switch::parse(k, var(k).map(|v| v.to_string_lossy().into_owned()).as_deref());
-        Env {
-            config_dir: match var(CONFIG_DIR) {
-                Some(dir) if dir.to_str().is_some_and(|d| d.trim().is_empty()) => None,
-                Some(dir) => Some(PathBuf::from(dir)),
-                None => cadcraft_engine::settings_dir::platform(&var),
-            },
-            locale: text(LOCALE),
-            vsync: switch(VSYNC),
-            wayland: switch(WAYLAND),
-            no_native_menu: switch(NO_NATIVE_MENU),
-            system_cursor: switch(SYSTEM_CURSOR),
-            font_alt: text(FONTALT),
-            font_fallback: text(FONTFALLBACK),
-        }
-    }
-}
-
-/// The `--help` section that lists [`VARS`].
-pub(crate) fn help() -> String {
-    let width = VARS.iter().map(|(name, _)| name.len()).max().unwrap_or(0) + 3;
-    VARS.iter().fold(String::from("Environment:"), |mut help, (name, line)| {
-        let _ = write!(help, "\n  {name:<width$}{line}");
-        help
-    })
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use std::cell::RefCell;
-
-    fn env<'a>(vars: &'a [(&'a str, &'a str)]) -> impl Fn(&str) -> Option<OsString> + 'a {
-        move |k| vars.iter().find(|(n, _)| *n == k).map(|(_, v)| OsString::from(v))
-    }
-
-    #[test]
-    fn every_variable_read_is_in_the_help_and_every_listed_one_is_read() {
-        let asked = RefCell::new(Vec::new());
-        Env::from_vars(|k| {
-            asked.borrow_mut().push(k.to_owned());
-            None
-        });
-        let ours: Vec<String> = asked.into_inner().into_iter().filter(|k| k.starts_with("CADCRAFT_")).collect();
-        let help = help();
-        let unset = Env::from_vars(|_| None);
-        for k in &ours {
-            assert!(VARS.iter().any(|(name, _)| name == k), "{k} is read but not in VARS");
-        }
-        for (name, line) in VARS {
-            assert!(ours.iter().any(|k| k == name), "{name} is in VARS but not read");
-            assert_ne!(Env::from_vars(env(&[(name, "1")])), unset, "{name} sets no field");
-            assert!(help.lines().any(|l| l.trim_start().starts_with(name) && l.ends_with(line)), "{help}");
-        }
-    }
-
-    #[test]
-    fn values_are_read_and_blank_ones_are_unset() {
-        let vars = [
-            (CONFIG_DIR, "/private/cc"),
-            ("HOME", "/home/u"),
-            ("XDG_CONFIG_HOME", "/x"),
-            ("APPDATA", "C:\\a"),
-            (LOCALE, "cs-CZ"),
-            (VSYNC, " On "),
-            (WAYLAND, "0"),
-            (NO_NATIVE_MENU, "yes"),
-            (SYSTEM_CURSOR, "maybe"),
-            (FONTALT, "Noto Sans"),
-            (FONTFALLBACK, "Vazirmatn, msjh.ttc"),
-        ];
-        let read = Env::from_vars(env(&vars));
-        assert_eq!(
-            read,
-            Env {
-                config_dir: Some(PathBuf::from("/private/cc")),
-                locale: Some("cs-CZ".into()),
-                vsync: Switch::On,
-                wayland: Switch::Off,
-                no_native_menu: Switch::On,
-                system_cursor: Switch::Default,
-                font_alt: Some("Noto Sans".into()),
-                font_fallback: Some("Vazirmatn, msjh.ttc".into()),
-            }
-        );
-        let blank = vars.map(|(k, _)| (k, if k == FONTALT { "  " } else { "" }));
-        let read = Env::from_vars(env(&blank));
-        assert_eq!(read.config_dir, None, "an empty variable means no directory, not the working directory");
-        assert_eq!((read.locale, read.font_alt, read.font_fallback), (None, None, None));
-        assert_eq!([read.vsync, read.wayland, read.no_native_menu, read.system_cursor], [Switch::Default; 4]);
-    }
-
-    #[test]
-    fn config_dir_unset_is_the_platform_folder_set_is_that_folder_blank_is_none() {
-        let platform = [("HOME", "/home/u"), ("XDG_CONFIG_HOME", "/x"), ("APPDATA", "C:\\a")];
-        let expected = cadcraft_engine::settings_dir::platform(env(&platform));
-        assert!(expected.is_some());
-        assert_eq!(Env::from_vars(env(&platform)).config_dir, expected);
-        let set = [platform.as_slice(), &[(CONFIG_DIR, "/private/cc")]].concat();
-        assert_eq!(Env::from_vars(env(&set)).config_dir, Some(PathBuf::from("/private/cc")));
-        for blank in ["", "  "] {
-            let vars = [platform.as_slice(), &[(CONFIG_DIR, blank)]].concat();
-            assert_eq!(Env::from_vars(env(&vars)).config_dir, None, "{blank:?} means no settings folder, not the platform's");
-        }
-    }
-}
@@ -1,158 +0,0 @@
-//! The desktop app's command line, as clap types: `cadcraft --help` comes from these doc comments
-//! and its Environment section from [`crate::env::VARS`], so the help and the parsers can't disagree. Anything they don't declare is a usage error naming
-//! it (exit status 2), so a typo such as `--sampel` doesn't open the window and then fail to open
-//! the flag as a file; so is a flag without its value, a repeated flag and a bad port, from the
-//! flag or from `CADCRAFT_CONTROL_PORT`. A value never starts with `-`, and a file whose name
-//! starts with `-` goes after `--`.
-
-use std::ffi::OsString;
-use std::path::PathBuf;
-
-use cadcraft_mcp::args::{blank_env_is_unset, name_env_vars};
-use clap::{Command, CommandFactory, FromArgMatches, Parser};
-
-/// Opens CADCraft with the given files
-#[derive(Parser)]
-#[command(name = "cadcraft", version = cadcraft_engine::build_version(), after_help = crate::env::help())]
-pub(crate) struct LaunchArgs {
-    /// Files to open. Put `--` before a name that starts with `-`
-    pub(crate) files: Vec<PathBuf>,
-    /// Start the localhost JSON-lines control server on this port
-    // allow_negative_numbers makes `--control -1` a bad value rather than a missing one.
-    #[arg(long, value_name = "PORT", env = "CADCRAFT_CONTROL_PORT", value_parser = control_port, allow_negative_numbers = true)]
-    pub(crate) control: Option<u16>,
-    /// Open with the sample drawing
-    #[arg(long)]
-    pub(crate) sample: bool,
-}
-
-/// The command line. An empty or blank variable counts as unset.
-pub(crate) fn command() -> Command {
-    LaunchArgs::command().mut_args(|a| blank_env_is_unset(a, |k| std::env::var_os(k)))
-}
-
-/// Parse the launch arguments (without the binary name) with `cmd`, from [`command`]. Old macOS
-/// passes a process serial number (`-psn_…`) when launched from Finder: it is dropped first, unless
-/// it comes after `--`. A bad value from a variable is a usage error naming the variable.
-pub(crate) fn parse(mut cmd: Command, args: impl IntoIterator<Item = OsString>) -> Result<LaunchArgs, clap::Error> {
-    let mut options = true;
-    let args: Vec<OsString> = args
-        .into_iter()
-        .filter(|a| {
-            options &= a != "--";
-            !(options && a.to_str().is_some_and(|s| s.starts_with("-psn_")))
-        })
-        .collect();
-    let argv = std::iter::once(OsString::from("cadcraft")).chain(args.iter().cloned());
-    let matches = cmd.try_get_matches_from_mut(argv).map_err(|e| name_env_vars(e, &cmd, &args))?;
-    LaunchArgs::from_arg_matches(&matches)
-}
-
-/// A control port, for clap's `value_parser`: `--control` and `CADCRAFT_CONTROL_PORT`, which may
-/// carry spaces.
-fn control_port(s: &str) -> Result<u16, NotAPort> {
-    s.trim().parse().map_err(|_| NotAPort)
-}
-
-/// A [`control_port`] value that isn't a port.
-#[derive(Debug, PartialEq, Eq, thiserror::Error)]
-#[error("expected a port, 0-65535")]
-struct NotAPort;
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use clap::error::ErrorKind;
-
-    /// Parse without the variables, so one exported where the tests run can't change them.
-    fn parse_args(args: &[&str]) -> Result<LaunchArgs, clap::Error> {
-        parse(command().mut_args(|a| a.env(None::<&str>)), args.iter().map(OsString::from))
-    }
-
-    fn usage_error(args: &[&str]) -> String {
-        let Err(e) = parse_args(args) else { panic!("{args:?} parsed") };
-        assert_eq!(e.exit_code(), 2, "{args:?}: {e}");
-        e.to_string()
-    }
-
-    #[test]
-    fn values_are_parsed() {
-        let parsed = parse_args(&["--control", " 50494 ", "--sample", "a.dxf", "b.dwg"]).unwrap();
-        assert_eq!((parsed.control, parsed.sample), (Some(50494), true));
-        assert_eq!(parsed.files, [PathBuf::from("a.dxf"), PathBuf::from("b.dwg")]);
-        let parsed = parse_args(&[]).unwrap();
-        assert_eq!((parsed.control, parsed.sample, parsed.files.len()), (None, false, 0));
-    }
-
-    #[test]
-    fn control_port_rejects_unparseable_values_naming_them() {
-        for bad in ["78787", "-1", "abc", "99999999999999999999"] {
-            assert!(usage_error(&["--control", bad]).contains(&format!("invalid value '{bad}' for '--control <PORT>'")), "{bad}");
-        }
-        assert!(usage_error(&["--control="]).contains("invalid value '' for '--control <PORT>'"));
-    }
-
-    #[test]
-    fn usage_errors_exit_2() {
-        assert!(usage_error(&["--sampel"]).contains("unexpected argument '--sampel'"));
-        assert!(usage_error(&["--control"]).contains("a value is required for '--control <PORT>'"));
-        // A following flag is never taken as the value.
-        assert!(usage_error(&["--control", "--sample"]).contains("a value is required for '--control <PORT>'"));
-        assert!(usage_error(&["--sample", "--sample"]).contains("cannot be used multiple times"));
-        assert!(usage_error(&["--control", "1", "--control", "2"]).contains("cannot be used multiple times"));
-    }
-
-    #[test]
-    fn version_stops_parsing() {
-        let e = parse_args(&["-V", "--control"]).err().unwrap();
-        assert_eq!((e.kind(), e.exit_code()), (ErrorKind::DisplayVersion, 0));
-        assert_eq!(e.to_string(), format!("{}\n", crate::version_string()));
-        let e = parse_args(&["--version", "--bogus"]).err().unwrap();
-        assert_eq!(e.kind(), ErrorKind::DisplayVersion);
-    }
-
-    #[test]
-    fn help_stops_parsing_and_double_dash_ends_options() {
-        let e = parse_args(&["-h", "--sampel", "--control"]).err().unwrap();
-        assert_eq!((e.kind(), e.exit_code()), (ErrorKind::DisplayHelp, 0));
-        let help = parse_args(&["--help"]).err().unwrap().to_string();
-        assert!(help.contains("--control <PORT>") && help.contains("CADCRAFT_CONFIG_DIR"), "{help}");
-
-        assert!(usage_error(&["--sampel", "--", "--help"]).contains("unexpected argument '--sampel'"));
-        let parsed = parse_args(&["a.dxf", "--", "--help", "-x"]).unwrap();
-        assert_eq!(parsed.files, ["a.dxf", "--help", "-x"].map(PathBuf::from));
-    }
-
-    #[test]
-    fn a_finder_process_serial_number_is_dropped() {
-        let parsed = parse_args(&["-psn_0_12345", "a.dxf"]).unwrap();
-        assert_eq!(parsed.files, [PathBuf::from("a.dxf")]);
-        let parsed = parse_args(&["--", "-psn_x.dxf"]).unwrap();
-        assert_eq!(parsed.files, [PathBuf::from("-psn_x.dxf")]);
-    }
-
-    /// A name that isn't valid Unicode is kept as given.
-    #[cfg(unix)]
-    #[test]
-    fn non_unicode_file_names_are_kept() {
-        use std::os::unix::ffi::OsStringExt as _;
-        let latin1 = OsString::from_vec(b"caf\xe9.dxf".to_vec());
-        let parsed = parse(command().mut_args(|a| a.env(None::<&str>)), [latin1.clone(), OsString::from("b.dxf")]).unwrap();
-        assert_eq!(parsed.files, [PathBuf::from(&latin1), PathBuf::from("b.dxf")]);
-    }
-
-    /// `--control` falls back to `PATH` here instead of `CADCRAFT_CONTROL_PORT`: `PATH` is set
-    /// wherever the tests run and is never a port, and tests can't set a variable (`set_var` is
-    /// unsafe).
-    #[test]
-    fn the_flag_wins_over_its_variable_and_a_bad_value_names_the_variable() {
-        let Some(path) = std::env::var_os("PATH").filter(|p| !p.is_empty()) else { return };
-        let path_fallback = || command().mut_args(|a| a.env(None::<&str>)).mut_arg("control", |a| a.env("PATH"));
-        let e = parse(path_fallback(), []).err().unwrap();
-        assert_eq!(e.exit_code(), 2);
-        let text = e.to_string();
-        assert!(text.contains(&format!("invalid value '{}' for 'PATH'", path.to_string_lossy())), "{text}");
-        assert!(!text.contains("--control <PORT>'"), "{text}");
-        assert_eq!(parse(path_fallback(), ["--control", "7"].map(OsString::from)).unwrap().control, Some(7));
-    }
-}
@@ -3,7 +3,7 @@
 //! Without a logger every `log::warn!`/`log::error!`/`log::info!` in the workspace (a broken app
 //! icon, the GPU canvas set-up, the control server) vanished. A launch from a desktop menu has no
 //! terminal, so the file is what a bug report can attach: `<settings dir>/logs/cadcraft.log`
-//! (`CADCRAFT_CONFIG_DIR`, or the platform settings directory; empty means none; see `env.rs`).
+//! (`CADCRAFT_CONFIG_DIR`, or the platform settings directory; see `config_dir` in `main.rs`).
 //! Each start moves the previous log to `cadcraft.1.log` (and that one to `.2`), so the log of a
 //! run that crashed survives the next launch.
 //!
@@ -1,6 +1,6 @@
 //! CADCraft desktop app.
 //!
-//! Usage: `cadcraft [--control <port>] [--sample] [files…]` (`cadcraft --help` lists the rest; see [`launch_args`])
+//! Usage: `cadcraft [--control <port>] [--sample] [files…]`
 //!
 //! `--control <port>` (or `CADCRAFT_CONTROL_PORT`) starts a localhost JSON-lines control server:
 //! `{"id":1,"method":"cmdline.input","params":{"text":"circle 0,0 5"}}` → `{"id":1,"ok":true,…}`.
@@ -10,16 +10,14 @@
 //! present mode (`CADCRAFT_VSYNC=0` selects that elsewhere); see `cadcraft_ui_egui::gpu::surface_config`.
 //!
 //! `log` records go to standard error and `<settings dir>/logs/cadcraft.log` (`RUST_LOG` sets the
-//! levels); see [`logging`]. The `CADCRAFT_*` variables are read once, at startup; see [`env`].
+//! levels); see [`logging`] and [`config_dir`].
 #![cfg_attr(all(target_os = "windows", not(debug_assertions)), windows_subsystem = "windows")]
 #![deny(clippy::unwrap_used, clippy::expect_used, clippy::panic, clippy::unimplemented, clippy::todo, clippy::unreachable)]

 mod control_server;
 mod desktop_theme;
-mod env;
 #[cfg(any(target_os = "windows", test))]
 mod graphics;
-mod launch_args;
 mod logging;
 #[cfg(target_os = "macos")]
 mod native_menu;
@@ -28,7 +26,6 @@ mod system_animations;
 mod workspace;

 use cadcraft_engine::Session;
-use cadcraft_ui_egui::switch::Switch;
 use cadcraft_ui_egui::{CadApp, Services, i18n};

 struct App {
@@ -42,25 +39,11 @@ struct App {
    workspace_error: Option<String>,
    #[cfg(target_os = "macos")]
    native_menu: Option<native_menu::NativeMenu>,
-    /// `CADCRAFT_NO_NATIVE_MENU`: the menus stay inside the window.
-    #[cfg(target_os = "macos")]
-    menus_in_window: bool,
-    /// The `movable` flag last set on the main window.
-    #[cfg(target_os = "macos")]
-    movable: Option<bool>,
 }

 impl App {
-    /// `ctx` is `None` only for the final attempt at exit.
-    fn persist_workspace(&mut self, ctx: Option<&egui::Context>) {
-        let result = match ctx {
-            None => self.workspace.save_on_exit(&self.cad.ui),
-            Some(ctx) => self.workspace.save_if_changed(&self.cad.ui, std::time::Instant::now()).map(|wait| {
-                if let Some(wait) = wait {
-                    ctx.request_repaint_after(wait);
-                }
-            }),
-        };
+    fn persist_workspace(&mut self, final_attempt: bool) {
+        let result = if final_attempt { self.workspace.save_on_exit(&self.cad.ui) } else { self.workspace.save_if_changed(&self.cad.ui) };
        if let Err(error) = result {
            if self.workspace_error.as_ref() != Some(&error) {
                eprintln!("CADCraft workspace: {error}");
@@ -94,7 +77,7 @@ impl eframe::App for App {
        if ctx.current_pass_index() == 0 {
            #[cfg(target_os = "macos")]
            {
-                if self.native_menu.is_none() && !self.menus_in_window {
+                if self.native_menu.is_none() && std::env::var_os("CADCRAFT_NO_NATIVE_MENU").is_none() {
                    self.native_menu = Some(native_menu::NativeMenu::install(&mut self.cad, ctx));
                }
                if let Some(m) = &mut self.native_menu {
@@ -103,7 +86,7 @@ impl eframe::App for App {
            }
            self.spacemouse.poll(&mut self.cad, ctx);
            // After `cad.logic`, so a control command's workspace change is saved in the same frame.
-            self.persist_workspace(Some(ctx));
+            self.persist_workspace(false);
        }
        if std::mem::take(&mut self.cad.quit_requested) {
            ctx.send_viewport_cmd(egui::ViewportCommand::Close);
@@ -117,13 +100,11 @@ impl eframe::App for App {
    }
    fn ui(&mut self, ui: &mut egui::Ui, _frame: &mut eframe::Frame) {
        self.cad.ui(ui);
-        #[cfg(target_os = "macos")]
-        craft_window::title_bar::sync_movable(ui.ctx(), &mut self.movable);
    }
    /// A normal exit: the workspace is saved, and this run's autosave files are not needed (a
    /// crash leaves them for recovery).
    fn on_exit(&mut self) {
-        self.persist_workspace(None);
+        self.persist_workspace(true);
        self.cad.cancel_screenshots();
        self.cad.shutdown_autosave();
    }
@@ -194,6 +175,30 @@ fn filters_for_save(name: &str) -> [(&'static str, &'static str); 6] {
    filters
 }

+/// The per-user settings directory (it holds `logs/` and `autosave/`): `CADCRAFT_CONFIG_DIR` if set, else
+/// `$XDG_CONFIG_HOME/cadcraft` or `~/.config/cadcraft` on Linux and the BSDs,
+/// `~/Library/Application Support/CADCraft` on macOS, `%APPDATA%\CADCraft` on Windows.
+fn config_dir() -> Option<std::path::PathBuf> {
+    config_dir_from(|k| std::env::var_os(k))
+}
+
+/// [`config_dir`] with the environment passed in (`var` looks a variable up). An empty variable
+/// counts as unset, so a blank value never means the working directory.
+fn config_dir_from(var: impl Fn(&str) -> Option<std::ffi::OsString>) -> Option<std::path::PathBuf> {
+    let set = |k: &str| var(k).filter(|v| !v.is_empty()).map(std::path::PathBuf::from);
+    if let Some(dir) = set("CADCRAFT_CONFIG_DIR") {
+        return Some(dir);
+    }
+    if cfg!(target_os = "macos") {
+        set("HOME").map(|h| h.join("Library/Application Support/CADCraft"))
+    } else if cfg!(windows) {
+        set("APPDATA").map(|a| a.join("CADCraft"))
+    } else {
+        // The XDG spec ignores a relative XDG_CONFIG_HOME.
+        set("XDG_CONFIG_HOME").filter(|p| p.is_absolute()).or_else(|| set("HOME").map(|h| h.join(".config"))).map(|c| c.join("cadcraft"))
+    }
+}
+
 const APP_ID: &str = "ai.storyteller.cadcraft";

 /// Stencil bits of the window's render pass (see `NativeOptions::stencil_buffer`).
@@ -209,7 +214,32 @@ fn app_icon() -> Option<egui::IconData> {
 }

 fn version_string() -> String {
-    format!("cadcraft {}", cadcraft_engine::build_version())
+    let sha = option_env!("CADCRAFT_BUILD_SHA").unwrap_or("dev");
+    format!("cadcraft {} ({sha})", env!("CARGO_PKG_VERSION"))
+}
+
+/// The control port from `--control <port>` or `CADCRAFT_CONTROL_PORT` (`source`); a value that is
+/// not a port is logged and ignored instead of silently starting no control channel.
+fn control_port_from(source: &str, value: Option<String>) -> Option<u16> {
+    let value = value?;
+    let port = value.trim().parse().ok();
+    if port.is_none() {
+        log::warn!("{source}: {value:?} is not a port number; the control channel is off");
+    }
+    port
+}
+
+/// `--control` followed by `value`: a bare `--control` (last argument) keeps the port already
+/// read from `CADCRAFT_CONTROL_PORT` (`current`) instead of turning the control channel off.
+fn control_flag(current: Option<u16>, value: Option<String>) -> Option<u16> {
+    if value.is_some() {
+        return control_port_from("--control", value);
+    }
+    match current {
+        Some(port) => log::warn!("--control: no port given; using CADCRAFT_CONTROL_PORT ({port})"),
+        None => log::warn!("--control: no port given; the control channel is off"),
+    }
+    current
 }

 /// Parse CLI options (`--control`, `--sample`, files, `--version`), install logging and I/O hooks, build the services and app, and run eframe.
@@ -225,33 +255,37 @@ fn main() -> eframe::Result {
        }
        return Ok(());
    }
-    // `--help` and `--version` print to standard output and exit 0. A usage error (an unknown or
-    // repeated flag, a missing or bad value, a bad CADCRAFT_CONTROL_PORT) names the argument on
-    // standard error and exits 2 before the window opens.
-    let launch = launch_args::parse(launch_args::command(), std::env::args_os().skip(1)).unwrap_or_else(|e| e.exit());
-    let vars = env::Env::read();
-    let (control_port, sample, files) = (launch.control, launch.sample, launch.files);
+    // lossy, so a value that is not Unicode is reported like any other bad port instead of ignored
+    let mut control_port =
+        control_port_from("CADCRAFT_CONTROL_PORT", std::env::var_os("CADCRAFT_CONTROL_PORT").map(|p| p.to_string_lossy().into_owned()));
+    let mut files = Vec::new();
+    let mut sample = false;
+    let mut args = std::env::args().skip(1);
+    while let Some(a) = args.next() {
+        match a.as_str() {
+            "--control" => control_port = control_flag(control_port, args.next()),
+            "--sample" => sample = true,
+            "--version" | "-V" => {
+                println!("{}", version_string());
+                return Ok(());
+            }
+            _ => files.push(a),
+        }
+    }
    // The log file lives under the settings directory; opened after the arguments, so `--version`
    // leaves no file behind. Records logged until now are written to it first.
    if let Some(logger) = logger {
-        match vars.config_dir.as_ref().map(|d| logger.attach_dir(&d.join(logging::LOG_DIR))) {
+        match config_dir().map(|d| logger.attach_dir(&d.join(logging::LOG_DIR))) {
            Some(Ok(path)) => log::info!("{} ({} {}), log file {}", version_string(), std::env::consts::OS, std::env::consts::ARCH, path.display()),
            Some(Err(e)) => log::warn!("no log file: {e}"),
            None => {
                logger.stderr_only();
-                log::warn!("no log file: no settings directory (an empty CADCRAFT_CONFIG_DIR turns it off)");
+                log::warn!("no log file: no settings directory (set CADCRAFT_CONFIG_DIR)");
            }
        }
    }
    install_io();
-    cadcraft_engine::settings_dir::set(vars.config_dir.clone());
-    if let Some(name) = &vars.font_alt {
-        cadcraft_engine::fonts::ttf::set_font_alt(name);
-    }
-    if let Some(list) = &vars.font_fallback {
-        cadcraft_engine::fonts::ttf::set_fallback_fonts(list);
-    }
-    let surface = cadcraft_ui_egui::gpu::surface_config(vars.vsync, cfg!(all(unix, not(target_os = "macos"))));
+    let surface = cadcraft_ui_egui::gpu::surface_config(std::env::var("CADCRAFT_VSYNC").ok().as_deref(), cfg!(all(unix, not(target_os = "macos"))));
    let mut options = eframe::NativeOptions {
        // The crosshair is drawn by the app: present without a queue on Linux/BSD, where X11
        // swapchains hold two frames back under vsync (`CADCRAFT_VSYNC=1` restores vsync).
@@ -294,7 +328,7 @@ fn main() -> eframe::Result {
    // manager showed a "no" cursor. Run through XWayland when it's there; CADCRAFT_WAYLAND=1
    // keeps the native Wayland backend.
    #[cfg(all(unix, not(target_os = "macos")))]
-    if std::env::var_os("DISPLAY").is_some() && vars.wayland != Switch::On {
+    if std::env::var_os("DISPLAY").is_some() && std::env::var_os("CADCRAFT_WAYLAND").is_none() {
        options.event_loop_builder = Some(Box::new(|b| {
            use winit::platform::x11::EventLoopBuilderExtX11;
            b.with_x11();
@@ -305,16 +339,15 @@ fn main() -> eframe::Result {
        options,
        Box::new(move |cc| {
            let mut app = CadApp::new(Session::empty(), services());
-            let (workspace, restored, workspace_error) = workspace::Workspace::load(vars.config_dir.as_deref());
+            let (workspace, restored, workspace_error) = workspace::Workspace::load();
            if let Some(ui) = restored {
                app.ui = ui;
            }
-            app.set_system_cursor_default(vars.system_cursor == Switch::On);
            if let Some(error) = &workspace_error {
                eprintln!("CADCraft workspace: {error}");
                app.set_status(error);
            }
-            app.system_languages = vars.locale.map(|s| vec![s]).unwrap_or_else(|| sys_locale::get_locales().collect());
+            app.system_languages = std::env::var("CADCRAFT_LOCALE").map(|s| vec![s]).unwrap_or_else(|_| sys_locale::get_locales().collect());
            // The user profile (Options): drafting settings, selection sizes, drawing-area colours.
            if let Some(profile) = cc.storage.and_then(|s| s.get_string(cadcraft_ui_egui::options::PROFILE_KEY)) {
                app.load_profile(&profile);
@@ -326,7 +359,7 @@ fn main() -> eframe::Result {
                cadcraft_ui_egui::autosave::load_prefs(&prefs);
            }
            // Autosave files (SAVEFILEPATH) default to `<settings dir>/autosave`.
-            if let Some(dir) = &vars.config_dir {
+            if let Some(dir) = config_dir() {
                app.enable_autosave(&dir.join("autosave"));
                app.enable_update_check();
                // Startup LISP (acad.lsp, acaddoc.lsp) is read from `<settings>/support`; the
@@ -372,10 +405,6 @@ fn main() -> eframe::Result {
                workspace_error,
                #[cfg(target_os = "macos")]
                native_menu: None,
-                #[cfg(target_os = "macos")]
-                menus_in_window: vars.no_native_menu == Switch::On,
-                #[cfg(target_os = "macos")]
-                movable: None,
            }))
        }),
    )
@@ -383,7 +412,13 @@ fn main() -> eframe::Result {

 #[cfg(test)]
 mod tests {
-    use super::{filters_for_save, follow_desktop};
+    use super::{config_dir_from, control_flag, control_port_from, filters_for_save, follow_desktop};
+    use std::ffi::OsString;
+    use std::path::PathBuf;
+
+    fn env<'a>(vars: &'a [(&'a str, &'a str)]) -> impl Fn(&str) -> Option<OsString> + 'a {
+        move |k| vars.iter().find(|(n, _)| *n == k).map(|(_, v)| OsString::from(v))
+    }

    #[test]
    fn save_dialog_offers_dwg_with_the_drawing_format_first() {
@@ -401,6 +436,59 @@ mod tests {
        }
    }

+    #[test]
+    fn control_port_values_that_are_not_ports_are_ignored() {
+        assert_eq!(control_port_from("--control", Some("7979".into())), Some(7979));
+        assert_eq!(control_port_from("--control", Some(" 7979 ".into())), Some(7979));
+        assert_eq!(control_port_from("--control", None), None);
+        for bad in ["", "abc", "-1", "65536", "99999999999999999999", "\u{0}"] {
+            assert_eq!(control_port_from("--control", Some(bad.into())), None, "{bad:?}");
+        }
+    }
+
+    #[test]
+    fn control_without_a_port_keeps_the_environment_port() {
+        // `CADCRAFT_CONTROL_PORT=47321 cadcraft --control` (#844)
+        assert_eq!(control_flag(Some(47321), None), Some(47321));
+        assert_eq!(control_flag(None, None), None);
+        // A port given on the command line still wins over the variable.
+        assert_eq!(control_flag(Some(47321), Some("7979".into())), Some(7979));
+        assert_eq!(control_flag(Some(47321), Some("abc".into())), None);
+    }
+
+    #[test]
+    fn the_override_variable_wins_and_empty_values_are_unset() {
+        let vars = [("CADCRAFT_CONFIG_DIR", "/tmp/cc"), ("HOME", "/home/u"), ("XDG_CONFIG_HOME", "/x"), ("APPDATA", "C:\\a")];
+        assert_eq!(config_dir_from(env(&vars)), Some(PathBuf::from("/tmp/cc")));
+        let empty = [("CADCRAFT_CONFIG_DIR", ""), ("HOME", ""), ("XDG_CONFIG_HOME", ""), ("APPDATA", "")];
+        assert_eq!(config_dir_from(env(&empty)), None, "no usable variable means no directory, not the working directory");
+        assert_eq!(config_dir_from(env(&[])), None);
+    }
+
+    #[cfg(all(unix, not(target_os = "macos")))]
+    #[test]
+    fn linux_and_bsd_follow_xdg_config_home() {
+        assert_eq!(config_dir_from(env(&[("XDG_CONFIG_HOME", "/x"), ("HOME", "/home/u")])), Some(PathBuf::from("/x/cadcraft")));
+        assert_eq!(config_dir_from(env(&[("HOME", "/home/u")])), Some(PathBuf::from("/home/u/.config/cadcraft")));
+        // The XDG spec says a relative XDG_CONFIG_HOME is ignored.
+        assert_eq!(config_dir_from(env(&[("XDG_CONFIG_HOME", "rel"), ("HOME", "/home/u")])), Some(PathBuf::from("/home/u/.config/cadcraft")));
+    }
+
+    #[cfg(target_os = "macos")]
+    #[test]
+    fn macos_uses_application_support() {
+        assert_eq!(config_dir_from(env(&[("HOME", "/Users/u")])), Some(PathBuf::from("/Users/u/Library/Application Support/CADCraft")));
+    }
+
+    #[cfg(windows)]
+    #[test]
+    fn windows_uses_appdata() {
+        assert_eq!(
+            config_dir_from(env(&[("APPDATA", "C:\\Users\\u\\AppData\\Roaming")])),
+            Some(PathBuf::from("C:\\Users\\u\\AppData\\Roaming").join("CADCraft"))
+        );
+    }
+
    /// View ▸ Theme ▸ System on Linux: winit reports no theme, so the desktop's answer stands in;
    /// without one (or where winit answers and the desktop doesn't) the input is left alone.
    #[test]
@@ -118,7 +118,7 @@ impl NativeMenu {
                if cmd == "ui.discord" {
                    ctx.open_url(egui::OpenUrl::new_tab("https://discord.gg/artcraft"));
                } else {
-                    menus::activate_native(app, ctx, &cmd.clone());
+                    menus::activate(app, &cmd.clone());
                }
                ctx.request_repaint();
            }
@@ -142,9 +142,8 @@ impl NativeMenu {
            return;
        }
        self.last_refresh = now;
-        let typing = menus::text_field_window(ctx).is_some();
        for (cmd, _, item) in self.items.values() {
-            let en = (typing && menus::edits_text(cmd)) || cadcraft_engine::find_command(cmd).is_none_or(|c| (c.enabled)(&app.session).is_ok());
+            let en = cadcraft_engine::find_command(cmd).is_none_or(|c| (c.enabled)(&app.session).is_ok());
            item.set_enabled(en);
        }
    }
@@ -1,18 +1,15 @@
 //! Native workspace preferences. Drawing data and transient dialogs never enter this file.

+use std::ffi::OsString;
 use std::fs::{self, File, OpenOptions};
 use std::io::{Read, Write};
 use std::path::{Path, PathBuf};
 use std::sync::atomic::{AtomicU64, Ordering};
-use std::time::{Duration, Instant};

 use cadcraft_ui_egui::UiState;
 use serde_json::{Value, json};

 const MAX_BYTES: u64 = 64 * 1024;
-/// Dragging a floating window changes its rect every frame; writes (each with an fsync) are
-/// spaced at least this far apart, and the newest state is written when the interval ends.
-const MIN_WRITE_INTERVAL: Duration = Duration::from_millis(500);
 static TEMP_SEQUENCE: AtomicU64 = AtomicU64::new(0);

 pub struct Workspace {
@@ -20,7 +17,18 @@ pub struct Workspace {
    last_attempt: Option<Value>,
    read_failed: bool,
    pending_write_error: Option<String>,
-    last_write: Option<Instant>,
+}
+
+fn config_dir_from(platform: &str, get: impl Fn(&str) -> Option<OsString>) -> Option<PathBuf> {
+    if let Some(root) = get("CADCRAFT_CONFIG_DIR") {
+        return (!root.is_empty()).then(|| PathBuf::from(root));
+    }
+    let nonempty = |key| get(key).filter(|value| !value.is_empty()).map(PathBuf::from);
+    match platform {
+        "macos" => nonempty("HOME").map(|home| home.join("Library/Application Support/CADCraft")),
+        "windows" => nonempty("APPDATA").map(|root| root.join("CADCraft")),
+        _ => nonempty("XDG_CONFIG_HOME").map(|root| root.join("cadcraft")).or_else(|| nonempty("HOME").map(|home| home.join(".config/cadcraft"))),
+    }
 }

 fn snapshot(ui: &UiState) -> Result<Value, String> {
@@ -36,7 +44,6 @@ fn snapshot(ui: &UiState) -> Result<Value, String> {
    }
    Ok(json!({
        "docking": ui.docking,
-        "dockingVersion": cadcraft_ui_egui::docking::LAYOUT_VERSION,
        "showToolsets": ui.show_toolsets,
        "showPalettes": ui.show_palettes,
        "showToolbar": ui.show_toolbar,
@@ -73,16 +80,10 @@ fn read(path: &Path) -> Result<Option<UiState>, String> {
        value.get("workspace").filter(|value| value.is_object()).ok_or_else(|| format!("{}: missing workspace object", path.display()))?;
    // Dock schemas can evolve independently of the other saved workspace preferences.
    // Recover only this optional field; runtime UiState deserialization remains strict.
-    // A layout from before the current shape (split frames, saved without `dockingVersion`)
-    // gives way to the default, its hidden panels with it.
    let mut fields = workspace.clone();
-    let (docking, version) = match fields.as_object_mut() {
-        Some(fields) => (fields.remove("docking"), fields.remove("dockingVersion")),
-        None => (None, None),
-    };
-    let current = version.and_then(|version| version.as_u64()).is_some_and(|version| version >= u64::from(cadcraft_ui_egui::docking::LAYOUT_VERSION));
+    let docking = fields.as_object_mut().and_then(|fields| fields.remove("docking"));
    let mut ui: UiState = serde_json::from_value(fields).map_err(|error| format!("{}: invalid workspace: {error}", path.display()))?;
-    if let Some(docking) = docking.filter(|_| current)
+    if let Some(docking) = docking
        && let Ok(docking) = serde_json::from_value::<cadcraft_ui_egui::docking::Workspace>(docking)
        && cadcraft_ui_egui::docking::validate(&docking).is_ok()
    {
@@ -126,9 +127,8 @@ fn write(path: &Path, workspace: &Value) -> Result<(), String> {
 }

 impl Workspace {
-    /// The workspace file in the settings directory `config_dir`; without one nothing is kept.
-    pub fn load(config_dir: Option<&Path>) -> (Self, Option<UiState>, Option<String>) {
-        Self::at(config_dir.map(|root| root.join("workspace.json")))
+    pub fn load() -> (Self, Option<UiState>, Option<String>) {
+        Self::at(config_dir_from(std::env::consts::OS, |key| std::env::var_os(key)).map(|root| root.join("workspace.json")))
    }

    fn at(path: Option<PathBuf>) -> (Self, Option<UiState>, Option<String>) {
@@ -136,54 +136,44 @@ impl Workspace {
        match result {
            Ok(ui) => {
                let initial = ui.as_ref().cloned().unwrap_or_default();
-                (Self { path, last_attempt: snapshot(&initial).ok(), read_failed: false, pending_write_error: None, last_write: None }, ui, None)
+                (Self { path, last_attempt: snapshot(&initial).ok(), read_failed: false, pending_write_error: None }, ui, None)
            }
            Err(error) => (
-                Self { path, last_attempt: None, read_failed: true, pending_write_error: None, last_write: None },
+                Self { path, last_attempt: None, read_failed: true, pending_write_error: None },
                None,
                Some(format!("Workspace could not be restored; its file was left unchanged. {error}")),
            ),
        }
    }

-    /// Writes `ui` if it differs from the last state written. `Ok(Some(wait))` means a change
-    /// is held back by [`MIN_WRITE_INTERVAL`]; call again after `wait` to write it.
-    pub fn save_if_changed(&mut self, ui: &UiState, now: Instant) -> Result<Option<Duration>, String> {
-        let Some(path) = &self.path else { return Ok(None) };
+    pub fn save_if_changed(&mut self, ui: &UiState) -> Result<(), String> {
+        let Some(path) = &self.path else { return Ok(()) };
        if self.read_failed {
            // Preserve a corrupt, oversized or newer-version file until the user repairs it.
-            return Ok(None);
+            return Ok(());
        }
        let value = snapshot(ui)?;
        if self.last_attempt.as_ref() == Some(&value) {
-            return self.pending_write_error.clone().map_or(Ok(None), Err);
-        }
-        if let Some(wait) = self.last_write.and_then(|last| MIN_WRITE_INTERVAL.checked_sub(now.saturating_duration_since(last)))
-            && !wait.is_zero()
-        {
-            return Ok(Some(wait));
+            return self.pending_write_error.clone().map_or(Ok(()), Err);
        }
        // Keep a failed state's warning without retrying disk I/O every rendered frame.
        self.last_attempt = Some(value.clone());
-        self.last_write = Some(now);
        let result = write(path, &value);
        self.pending_write_error = result.as_ref().err().cloned();
-        result.map(|()| None)
+        result
    }

    pub fn save_on_exit(&mut self, ui: &UiState) -> Result<(), String> {
        if self.pending_write_error.is_some() {
            self.last_attempt = None;
        }
-        self.last_write = None;
-        self.save_if_changed(ui, Instant::now()).map(|_| ())
+        self.save_if_changed(ui)
    }
 }

 #[cfg(test)]
 mod tests {
    use super::*;
-    use std::ffi::OsString;

    fn temp_dir() -> PathBuf {
        let sequence = TEMP_SEQUENCE.fetch_add(1, Ordering::Relaxed);
@@ -194,18 +184,20 @@ mod tests {

    #[test]
    fn profile_override_isolated_or_explicitly_disabled() {
-        let vars = |config: Option<&'static str>| {
-            move |key: &str| match key {
-                "CADCRAFT_CONFIG_DIR" => config.map(OsString::from),
-                "HOME" | "APPDATA" | "XDG_CONFIG_HOME" => Some(OsString::from("/unrelated-user-profile")),
-                _ => None,
-            }
+        let get = |key: &str| match key {
+            "CADCRAFT_CONFIG_DIR" => Some(OsString::from("/private/test-state")),
+            "HOME" | "APPDATA" | "XDG_CONFIG_HOME" => Some(OsString::from("/unrelated-user-profile")),
+            _ => None,
        };
-        let dir = |config| crate::env::Env::from_vars(vars(config)).config_dir;
-        assert_eq!(dir(Some("/private/test-state")), Some(PathBuf::from("/private/test-state")));
-        assert_eq!(dir(Some("")), None);
-        let (_, restored, error) = Workspace::load(dir(Some("")).as_deref());
-        assert!(restored.is_none() && error.is_none(), "no settings folder, no workspace file");
+        for platform in ["macos", "windows", "linux", "freebsd"] {
+            assert_eq!(config_dir_from(platform, get), Some(PathBuf::from("/private/test-state")));
+            assert_eq!(config_dir_from(platform, |key| if key == "CADCRAFT_CONFIG_DIR" { Some(OsString::new()) } else { get(key) }), None);
+        }
+        assert_eq!(
+            config_dir_from("linux", |key| (key == "XDG_CONFIG_HOME").then(|| OsString::from("/config"))),
+            Some(PathBuf::from("/config/cadcraft"))
+        );
+        assert_eq!(config_dir_from("macos", |_| None), None);
    }

    #[test]
@@ -224,7 +216,7 @@ mod tests {
            start_tab: true,
            ..Default::default()
        };
-        first.save_if_changed(&ui, Instant::now()).unwrap();
+        first.save_if_changed(&ui).unwrap();
        let bytes = fs::read(&path).unwrap();
        let value: Value = serde_json::from_slice(&bytes).unwrap();
        assert!(value["workspace"].get("dialog").is_none());
@@ -237,42 +229,37 @@ mod tests {
        let mut transient_only = ui.clone();
        transient_only.dialog = None;
        transient_only.start_tab = false;
-        first.save_if_changed(&transient_only, Instant::now()).unwrap();
+        first.save_if_changed(&transient_only).unwrap();
        assert_eq!(fs::read(&path).unwrap(), bytes);
        fs::remove_dir_all(directory).unwrap();
    }

    #[test]
-    fn dock_columns_floating_and_hidden_panels_survive_native_workspace_file_reload() {
-        use cadcraft_ui_egui::docking::{LAYOUT_VERSION, Panel, permissions, reveal_panel};
+    fn docked_floating_and_hidden_panels_survive_native_workspace_file_reload() {
+        use cadcraft_ui_egui::docking::{Panel, permissions};
        let directory = temp_dir();
        let path = directory.join("workspace.json");
        let (mut store, _, _) = Workspace::at(Some(path.clone()));
        let mut ui = UiState::default();
        let mut app = cadcraft_ui_egui::CadApp::new(cadcraft_engine::Session::default(), Default::default());
-        app.run("ui.dock", json!({"operation":"move", "panel":"layers", "target":"properties", "zone":"left"})).unwrap();
-        app.run("ui.dock", json!({"operation":"float", "panel":"properties", "rect":[120,90,340,410]})).unwrap();
+        app.run("ui.dock", json!({"operation":"float", "panel":"layers", "rect":[120,90,340,410]})).unwrap();
        ui.docking = app.ui.docking;
        ui.docking.set_visible(Panel::ToolSets, false, None, permissions).unwrap();
        ui.show_toolsets = false;
-        store.save_if_changed(&ui, Instant::now()).unwrap();
-        let saved: Value = serde_json::from_slice(&fs::read(&path).unwrap()).unwrap();
-        assert_eq!(saved["workspace"]["dockingVersion"], json!(LAYOUT_VERSION));
+        store.save_if_changed(&ui).unwrap();
        let (_, reloaded, error) = Workspace::at(Some(path));
        assert!(error.is_none());
        let mut reloaded = reloaded.unwrap();
        assert_eq!(serde_json::to_value(&reloaded.docking).unwrap(), serde_json::to_value(&ui.docking).unwrap());
-        assert!(!reloaded.show_toolsets);
-        reveal_panel(&mut reloaded.docking, Panel::ToolSets).unwrap();
-        let tools = reloaded.docking.layout.location(&Panel::ToolSets).unwrap();
-        assert_eq!(serde_json::to_value(&tools.group).unwrap()["column"]["side"], json!("Start"), "{tools:?}");
+        reloaded.docking.set_visible(Panel::ToolSets, true, None, permissions).unwrap();
+        assert!(reloaded.docking.layout.contains(&Panel::ToolSets));
        assert_eq!(reloaded.docking.layout.floating[0].rect, [120.0, 90.0, 340.0, 410.0]);
        fs::remove_dir_all(directory).unwrap();
    }

    #[test]
-    fn split_frame_layout_file_loads_as_the_dock_default_with_its_other_settings() {
-        use cadcraft_ui_egui::docking::default_workspace;
+    fn version_one_docking_file_still_loads() {
+        use cadcraft_ui_egui::docking::{Panel, reveal_panel};
        // Written as CADCraft 0.7 writes it: craft-ui's v1 layout with no docking version, a
        // floating window as one `{panels, active, rect}` group, Tool Sets closed.
        let file = r#"{"version":1,"workspace":{
@@ -284,18 +271,28 @@ mod tests {
                    "floating":[{"panels":["layers","externalReferences"],"active":1,"rect":[120.0,90.0,340.0,410.0]}]},
                "hidden":[["toolSets",{"floating":null,"anchor":"canvas","placement":{"Split":"Left"},
                    "size":{"FixedFirst":220.0},"stack":null,"sibling":["canvas","properties"]}]]},
-            "showToolsets":false,"showPalettes":true,"showToolbar":false,"toolsetTab":"Modeling","historyLines":4}}"#;
+            "showToolsets":false,"showPalettes":true,"toolsetTab":"Modeling","historyLines":4}}"#;
        let directory = temp_dir();
        let path = directory.join("workspace.json");
        fs::write(&path, file).unwrap();
        let (_, restored, error) = Workspace::at(Some(path));
        assert!(error.is_none(), "{error:?}");
-        let ui = restored.unwrap();
+        let mut ui = restored.unwrap();
        assert_eq!(ui.toolset_tab, "Modeling");
-        assert_eq!(ui.history_lines, 4);
-        assert!(!ui.show_toolsets && ui.show_palettes && !ui.show_toolbar);
-        assert_eq!(ui.docking.layout, default_workspace().layout);
-        assert!(ui.docking.hidden.is_empty(), "{:?}", ui.docking.hidden);
+        let docking = &ui.docking;
+        assert_eq!(docking.layout.floating.len(), 1);
+        let window = &docking.layout.floating[0];
+        assert_eq!(window.rect, [120.0, 90.0, 340.0, 410.0]);
+        assert_eq!(serde_json::to_value(&window.root).unwrap(), json!({"Tabs":{"panels":["layers","externalReferences"],"active":1}}));
+        assert_eq!(
+            serde_json::to_value(&docking.layout.root).unwrap()["Split"]["second"],
+            json!({"Stack":{"entries":[{"panel":"properties","open":false,"height":null}]}})
+        );
+        assert!(!docking.layout.contains(&Panel::ToolSets));
+        reveal_panel(&mut ui.docking, Panel::ToolSets).unwrap();
+        let tools = ui.docking.layout.location(&Panel::ToolSets).unwrap();
+        assert_eq!(tools.anchor, Some(Panel::Canvas));
+        assert_eq!(serde_json::to_value((&tools.placement, &tools.size)).unwrap(), json!([{"Split":"Left"}, {"FixedFirst":220.0}]));
        fs::remove_dir_all(directory).unwrap();
    }

@@ -314,7 +311,7 @@ mod tests {
            let (mut store, ui, error) = Workspace::at(Some(path.clone()));
            assert!(ui.is_none());
            assert!(error.as_deref().is_some_and(|error| error.contains("left unchanged")));
-            store.save_if_changed(&UiState { show_palettes: false, ..Default::default() }, Instant::now()).unwrap();
+            store.save_if_changed(&UiState { show_palettes: false, ..Default::default() }).unwrap();
            assert_eq!(fs::read(&path).unwrap(), bytes);
        }
        fs::remove_dir_all(directory).unwrap();
@@ -329,8 +326,7 @@ mod tests {
            json!({"layout":false,"hidden":[]}),
            json!({"layout":{"root":null,"floating":[]},"hidden":[["futurePanel",{}]]}),
        ] {
-            let workspace = json!({"showToolbar":false,"showPalettes":false,"toolsetTab":"Modeling", "collapsedGroups":["Draw"], "historyLines":7,"docking":docking,
-                "dockingVersion":cadcraft_ui_egui::docking::LAYOUT_VERSION});
+            let workspace = json!({"showToolbar":false,"showPalettes":false,"toolsetTab":"Modeling", "collapsedGroups":["Draw"], "historyLines":7,"docking":docking});
            assert!(serde_json::from_value::<UiState>(workspace.clone()).is_err(), "runtime state must stay strict");
            fs::write(&path, serde_json::to_vec(&json!({"version":1,"workspace":workspace})).unwrap()).unwrap();
            let (_, restored, error) = Workspace::at(Some(path.clone()));
@@ -346,41 +342,16 @@ mod tests {
        fs::remove_dir_all(directory).unwrap();
    }

-    #[test]
-    fn rapid_changes_are_written_once_per_interval_with_the_newest_state() {
-        let directory = temp_dir();
-        let path = directory.join("workspace.json");
-        let (mut store, _, _) = Workspace::at(Some(path.clone()));
-        let start = Instant::now();
-        let mut ui = UiState { history_lines: 1, ..Default::default() };
-        assert_eq!(store.save_if_changed(&ui, start).unwrap(), None);
-        // A drag: a new state every frame, none of them written until the interval ends.
-        for (frame, lines) in (2..=5).enumerate() {
-            ui.history_lines = lines;
-            let now = start + Duration::from_millis(16 * (frame as u64 + 1));
-            let wait = store.save_if_changed(&ui, now).unwrap();
-            assert_eq!(wait, Some(MIN_WRITE_INTERVAL - (now - start)));
-        }
-        assert_eq!(read(&path).unwrap().unwrap().history_lines, 1);
-        assert_eq!(store.save_if_changed(&ui, start + MIN_WRITE_INTERVAL).unwrap(), None);
-        assert_eq!(read(&path).unwrap().unwrap().history_lines, 5);
-        ui.history_lines = 6;
-        assert!(store.save_if_changed(&ui, start + MIN_WRITE_INTERVAL).unwrap().is_some());
-        store.save_on_exit(&ui).unwrap();
-        assert_eq!(read(&path).unwrap().unwrap().history_lines, 6);
-        fs::remove_dir_all(directory).unwrap();
-    }
-
    #[test]
    fn invalid_update_cannot_replace_last_good_workspace() {
        let directory = temp_dir();
        let path = directory.join("workspace.json");
        let (mut store, _, _) = Workspace::at(Some(path.clone()));
        let mut ui = UiState { show_palettes: false, ..Default::default() };
-        store.save_if_changed(&ui, Instant::now()).unwrap();
+        store.save_if_changed(&ui).unwrap();
        let good = fs::read(&path).unwrap();
        ui.collapsed_groups = vec!["x".repeat(257)];
-        assert!(store.save_if_changed(&ui, Instant::now()).is_err());
+        assert!(store.save_if_changed(&ui).is_err());
        assert_eq!(fs::read(&path).unwrap(), good);
        fs::remove_dir_all(directory).unwrap();
    }
@@ -393,9 +364,9 @@ mod tests {
        // Simulate a destination becoming unavailable after startup.
        fs::create_dir(&path).unwrap();
        let ui = UiState { show_palettes: false, ..Default::default() };
-        let first_error = store.save_if_changed(&ui, Instant::now()).unwrap_err();
+        let first_error = store.save_if_changed(&ui).unwrap_err();
        fs::remove_dir(&path).unwrap();
-        assert_eq!(store.save_if_changed(&ui, Instant::now()).unwrap_err(), first_error);
+        assert_eq!(store.save_if_changed(&ui).unwrap_err(), first_error);
        assert!(!path.exists(), "ordinary frames must not retry disk writes");
        store.save_on_exit(&ui).unwrap();
        assert!(!read(&path).unwrap().unwrap().show_palettes);
@@ -2,7 +2,3 @@ allow-unwrap-in-tests = true
 allow-expect-in-tests = true
 allow-panic-in-tests = true
 allow-indexing-slicing-in-tests = true
-disallowed-types = [
-    { path = "egui::ComboBox", reason = "use craft_ui::ComboBox: egui's combo box menu can't grow back while open (egui#5225)" },
-]
-cognitive-complexity-threshold = 30
@@ -358,56 +358,6 @@ fn components<'a>(cons: &[&'a Constraint]) -> Vec<Vec<&'a Constraint>> {
    groups.into_values().collect()
 }

-/// The solver weight of each unknown of `model`: kept handles weigh more, preferred-to-move ones
-/// less, angles and ratios by size², and contact parameters move freely.
-fn solver_weights(model: &Model, opts: &SolveOptions) -> Vec<f64> {
-    let mut weights = vec![1.0; model.x0.len()];
-    for s in &model.slots {
-        let w = if opts.keep.contains(&s.handle) {
-            1e4
-        } else if opts.prefer_move.contains(&s.handle) {
-            1e-2
-        } else {
-            1.0
-        };
-        for j in s.off..s.off + s.len {
-            if let Some(slot) = weights.get_mut(j) {
-                *slot = w;
-            }
-        }
-        for (j, f) in slot_scales(model, s) {
-            if let Some(slot) = weights.get_mut(j) {
-                *slot *= f;
-            }
-        }
-    }
-    // Contact parameters move freely.
-    let geo = model.slots.iter().map(|s| s.off + s.len).max().unwrap_or(0);
-    for w in weights.iter_mut().skip(geo) {
-        *w = 1e-3;
-    }
-    weights
-}
-
-/// Per-unknown factors for the angles and ratios of one slot: size², so that the movement of
-/// points is what is minimised.
-fn slot_scales(model: &Model, s: &model::Slot) -> Vec<(usize, f64)> {
-    let sq = |j: usize| model.x0.get(j).map_or(1.0, |r| (r * r).max(1e-6));
-    match s.shape {
-        model::Shape::Arc => vec![(s.off + 3, sq(s.off + 2)), (s.off + 4, sq(s.off + 2))],
-        model::Shape::Ellipse { arc } => {
-            let a2 = (sq(s.off + 2) + sq(s.off + 3)).max(1e-6);
-            let mut v = vec![(s.off + 4, a2)];
-            if arc {
-                v.extend([(s.off + 5, a2), (s.off + 6, a2)]);
-            }
-            v
-        }
-        model::Shape::Insert { .. } => vec![(s.off + 2, model.rigid_extent2(s.handle).max(1.0))],
-        _ => Vec::new(),
-    }
-}
-
 /// Build the component systems. Constraints that cannot be interpreted are returned as skipped.
 pub(crate) fn build(d: &Drawing, cons: &[&Constraint], opts: &SolveOptions) -> Result<(Vec<Comp>, Vec<(u32, String)>), SolveError> {
    let mut members_left = model::MAX_RIGID_WORK;
@@ -446,7 +396,46 @@ pub(crate) fn build_budgeted(
        if built.is_empty() {
            continue;
        }
-        let weights = solver_weights(&model, opts);
+        let mut weights = vec![1.0; model.x0.len()];
+        for s in &model.slots {
+            let w = if opts.keep.contains(&s.handle) {
+                1e4
+            } else if opts.prefer_move.contains(&s.handle) {
+                1e-2
+            } else {
+                1.0
+            };
+            for j in s.off..s.off + s.len {
+                if let Some(slot) = weights.get_mut(j) {
+                    *slot = w;
+                }
+            }
+            // Angles and ratios: weight by size² so the movement of points is what is minimised.
+            let sq = |j: usize| model.x0.get(j).map_or(1.0, |r| (r * r).max(1e-6));
+            let scaled: Vec<(usize, f64)> = match s.shape {
+                model::Shape::Arc => vec![(s.off + 3, sq(s.off + 2)), (s.off + 4, sq(s.off + 2))],
+                model::Shape::Ellipse { arc } => {
+                    let a2 = (sq(s.off + 2) + sq(s.off + 3)).max(1e-6);
+                    let mut v = vec![(s.off + 4, a2)];
+                    if arc {
+                        v.extend([(s.off + 5, a2), (s.off + 6, a2)]);
+                    }
+                    v
+                }
+                model::Shape::Insert { .. } => vec![(s.off + 2, model.rigid_extent2(s.handle).max(1.0))],
+                _ => Vec::new(),
+            };
+            for (j, f) in scaled {
+                if let Some(slot) = weights.get_mut(j) {
+                    *slot *= f;
+                }
+            }
+        }
+        // Contact parameters move freely.
+        let geo = model.slots.iter().map(|s| s.off + s.len).max().unwrap_or(0);
+        for w in weights.iter_mut().skip(geo) {
+            *w = 1e-3;
+        }
        let held = opts.hold.iter().filter_map(|r| model.lock_indices(r)).flatten().collect();
        let tol = scale_tol(&model.x0);
        comps.push(Comp { model, built, weights, held, tol });
@@ -3,7 +3,7 @@
 use cadcraft_doc::{Constraint, ConstraintKind, DistAxis, GeomRef};
 use cadcraft_geom::Vec2;

-use crate::curves::{Ell, circle_at};
+use crate::curves::circle_at;
 use crate::model::Model;

 /// Contact parameter samples per curve when guessing where two curves touch.
@@ -205,7 +205,42 @@ impl Built {
                };
                b.rows = 1;
            }
-            K::Tangent | K::Smooth => return Self::tangent_form(b, c, m, x),
+            K::Tangent | K::Smooth => {
+                if n != 2 {
+                    return need("two objects");
+                }
+                if c.refs.iter().any(|r| m.is_spline(r)) {
+                    return Self::spline_form(b, m, x);
+                }
+                b.rows = 1;
+                if let (Some((a, bb)), Some((cc, _))) = (ln(0), ci(1)) {
+                    b.form = Form::LC { swap: false };
+                    b.sign = sgn(dir_n(a, bb).cross(cc - a));
+                } else if let (Some((a, bb)), Some((cc, _))) = (ln(1), ci(0)) {
+                    b.form = Form::LC { swap: true };
+                    b.sign = sgn(dir_n(a, bb).cross(cc - a));
+                } else if let (Some((c1, r1)), Some((c2, r2))) = (ci(0), ci(1)) {
+                    b.form = Form::CC;
+                    // sign > 0: external tangency; < 0: internal.
+                    let d = c1.dist(c2);
+                    b.sign = if d >= r1.abs().max(r2.abs()) { 1.0 } else { -1.0 };
+                    b.target = sgn(r1 - r2);
+                } else if let (Some((a, bb)), Some(e)) = (ln(0), el(1)) {
+                    b.form = Form::LE { swap: false };
+                    b.sign = sgn(dir_n(a, bb).cross(e.c - a));
+                } else if let (Some((a, bb)), Some(e)) = (ln(1), el(0)) {
+                    b.form = Form::LE { swap: true };
+                    b.sign = sgn(dir_n(a, bb).cross(e.c - a));
+                } else if (ci(0).is_some() || el(0).is_some()) && (ci(1).is_some() || el(1).is_some()) {
+                    b.form = Form::Contact;
+                    b.rows = 3;
+                    b.aux_init = b.contact_guess(m, x).ok_or_else(|| format!("{} could not find where the curves touch", c.kind.name()))?;
+                } else if ln(0).is_some() && ln(1).is_some() && c.kind == K::Smooth {
+                    b.form = Form::LL;
+                } else {
+                    return need("a line and a circle/arc/ellipse, two curves, or a spline end and a curve");
+                }
+            }
            K::Symmetric => {
                if n != 3 || ln(2).is_none() {
                    return need("two objects and a symmetry line");
@@ -312,8 +347,154 @@ impl Built {
        out.resize(start + self.rows, 0.0);
    }

-    fn eval_inner(&self, model: &Model, values: &[f64], out: &mut Vec<f64>) -> Option<()> {
-        ResidualEval { built: self, model, values, out }.evaluate()
+    fn eval_inner(&self, m: &Model, x: &[f64], out: &mut Vec<f64>) -> Option<()> {
+        use ConstraintKind as K;
+        let r = |i: usize| self.refs.get(i);
+        let pt = |i: usize| m.point(x, r(i)?);
+        let ln = |i: usize| m.line(x, r(i)?);
+        let ci = |i: usize| m.circle(x, r(i)?);
+        let el = |i: usize| m.ellipse(x, r(i)?);
+        match (self.kind, self.form) {
+            (_, Form::Lock) => {}
+            (_, Form::PE { swap }) => {
+                let (p, e) = if swap { (pt(1)?, el(0)?) } else { (pt(0)?, el(1)?) };
+                out.push(e.on(p));
+            }
+            (_, Form::LE { swap }) => {
+                let ((a, b), e) = if swap { (ln(1)?, el(0)?) } else { (ln(0)?, el(1)?) };
+                let d = dir_n(a, b);
+                out.push(self.sign * d.cross(e.c - a) - e.support(d.perp()));
+            }
+            (_, Form::Contact) => {
+                let (p0, d0) = self.curve_at(m, x, 0, *x.get(self.aux)?)?;
+                let (p1, d1) = self.curve_at(m, x, 1, *x.get(self.aux + 1)?)?;
+                out.extend([p0.x - p1.x, p0.y - p1.y, d0.normalized().cross(d1.normalized())]);
+            }
+            (_, Form::EndOn { spline, at_end }) => {
+                let f = m.end_frame(x, r(spline)?, at_end)?;
+                let o = 1 - spline.min(1);
+                if let Some((a, b)) = ln(o) {
+                    let d = dir_n(a, b);
+                    out.extend([d.cross(f.p - a), f.t.cross(d)]);
+                } else if let Some((c, rad)) = ci(o) {
+                    out.extend([f.p.dist(c) - rad, f.t.dot(dir_n(c, f.p))]);
+                } else {
+                    let e = el(o)?;
+                    out.extend([e.on(f.p), f.t.dot(e.normal(f.p))]);
+                }
+            }
+            (_, Form::Join { a_end, b_end, g2 }) => {
+                // Orient both so the first curve runs into the joint and the second out of it.
+                let fa = m.end_frame(x, r(0)?, a_end)?;
+                let fb = m.end_frame(x, r(1)?, b_end)?;
+                let fa = if a_end { fa } else { fa.reversed() };
+                let fb = if b_end { fb.reversed() } else { fb };
+                out.extend([fa.p.x - fb.p.x, fa.p.y - fb.p.y, fa.t.cross(fb.t)]);
+                if g2 {
+                    out.push(fa.k - fb.k);
+                }
+            }
+            (_, Form::Anchor(a)) => {
+                let p = pt(0)?;
+                out.extend([p.x - a.x, p.y - a.y]);
+            }
+            (K::Coincident, Form::PP) => {
+                let (p, q) = (pt(0)?, pt(1)?);
+                out.extend([p.x - q.x, p.y - q.y]);
+            }
+            (K::Coincident, Form::PL { swap }) => {
+                let (p, (a, b)) = if swap { (pt(1)?, ln(0)?) } else { (pt(0)?, ln(1)?) };
+                out.push(dir_n(a, b).cross(p - a));
+            }
+            (K::Coincident, Form::PC { swap }) => {
+                let (p, (c, rad)) = if swap { (pt(1)?, ci(0)?) } else { (pt(0)?, ci(1)?) };
+                out.push(p.dist(c) - rad);
+            }
+            (K::Horizontal | K::Vertical, f) => {
+                let (a, b) = if f == Form::L1 { ln(0).or_else(|| el(0).map(|e| (e.c - e.mj, e.c + e.mj)))? } else { (pt(0)?, pt(1)?) };
+                out.push(if self.kind == K::Horizontal { a.y - b.y } else { a.x - b.x });
+            }
+            (K::Parallel | K::Smooth, Form::LL) => {
+                let ((a1, b1), (a2, b2)) = (ln(0)?, ln(1)?);
+                out.push(dir_n(a1, b1).cross(dir_n(a2, b2)));
+            }
+            (K::Perpendicular, _) => {
+                let ((a1, b1), (a2, b2)) = (ln(0)?, ln(1)?);
+                out.push(dir_n(a1, b1).dot(dir_n(a2, b2)));
+            }
+            (K::Collinear, _) => {
+                let ((a1, b1), (a2, b2)) = (ln(0)?, ln(1)?);
+                let d = dir_n(a1, b1);
+                out.extend([d.cross(a2 - a1), d.cross(b2 - a1)]);
+            }
+            (K::Concentric, _) => {
+                let center = |i: usize| ci(i).map(|(c, _)| c).or_else(|| el(i).map(|e| e.c)).or_else(|| pt(i));
+                let (p, q) = (center(0)?, center(1)?);
+                out.extend([p.x - q.x, p.y - q.y]);
+            }
+            (K::Equal, Form::LL) => {
+                let ((a1, b1), (a2, b2)) = (ln(0)?, ln(1)?);
+                out.push(a1.dist(b1) - a2.dist(b2));
+            }
+            (K::Equal, _) => {
+                let ((_, r1), (_, r2)) = (ci(0)?, ci(1)?);
+                out.push(r1 - r2);
+            }
+            (K::Tangent | K::Smooth, Form::LC { swap }) => {
+                let ((a, b), (c, rad)) = if swap { (ln(1)?, ci(0)?) } else { (ln(0)?, ci(1)?) };
+                out.push(self.sign * dir_n(a, b).cross(c - a) - rad);
+            }
+            (K::Tangent | K::Smooth, _) => {
+                let ((c1, r1), (c2, r2)) = (ci(0)?, ci(1)?);
+                let d = c1.dist(c2);
+                out.push(if self.sign > 0.0 { d - (r1 + r2) } else { d - self.target * (r1 - r2) });
+            }
+            (K::Symmetric, Form::PP) => {
+                let (p, q, (a, b)) = (pt(0)?, pt(1)?, ln(2)?);
+                let d = dir_n(a, b);
+                out.extend([d.cross(p.mid(q) - a), d.dot(q - p)]);
+            }
+            (K::Symmetric, Form::SymLines { crossed }) => {
+                let ((a1, b1), (a2, b2), (a, b)) = (ln(0)?, ln(1)?, ln(2)?);
+                let (a2, b2) = if crossed { (b2, a2) } else { (a2, b2) };
+                let d = dir_n(a, b);
+                out.extend([d.cross(a1.mid(a2) - a), d.dot(a2 - a1), d.cross(b1.mid(b2) - a), d.dot(b2 - b1)]);
+            }
+            (K::Symmetric, _) => {
+                let ((p, r1), (q, r2), (a, b)) = (ci(0)?, ci(1)?, ln(2)?);
+                let d = dir_n(a, b);
+                out.extend([d.cross(p.mid(q) - a), d.dot(q - p), r1 - r2]);
+            }
+            (K::Distance(axis), f) => {
+                let v = match (axis, f) {
+                    (_, Form::PL { swap }) => {
+                        let (p, (a, b)) = if swap { (pt(1)?, ln(0)?) } else { (pt(0)?, ln(1)?) };
+                        dir_n(a, b).cross(p - a)
+                    }
+                    _ => {
+                        let (a, b) = if f == Form::L1 { ln(0)? } else { (pt(0)?, pt(1)?) };
+                        match axis {
+                            DistAxis::Aligned => a.dist(b),
+                            DistAxis::Horizontal => b.x - a.x,
+                            DistAxis::Vertical => b.y - a.y,
+                        }
+                    }
+                };
+                out.push(self.sign * v - self.target);
+            }
+            (K::Angular, Form::ArcSweep) => {
+                out.push(m.arc_sweep(x, r(0)?)? - self.target);
+            }
+            (K::Angular, Form::Rays { rev }) => {
+                let ((a1, b1), (a2, b2)) = (ln(0)?, ln(1)?);
+                let (d1, d2) = (ray(a1, b1, rev[0]), ray(a2, b2, rev[1]));
+                out.push(wrap(d1.cross(d2).atan2(d1.dot(d2)) - self.sign * self.target));
+            }
+            (K::Radius, _) => out.push(ci(0)?.1 - self.target),
+            (K::Diameter, _) => out.push(2.0 * ci(0)?.1 - self.target),
+            _ => {}
+        }
+        Some(())
    }

    /// Point and derivative of curve reference `i` (circle, arc or ellipse) at parameter `t`.
@@ -346,54 +527,6 @@ impl Built {
    /// Tangent or Smooth with a spline: the spline end and the other curve's nearest end are
    /// joined (Smooth: G2; Tangent between splines: G1), or the spline's end touches a line,
    /// circle, arc or ellipse tangentially. A `start`/`end` reference picks the end.
-    fn tangent_form(mut built: Built, constraint: &Constraint, model: &Model, values: &[f64]) -> Result<Built, String> {
-        use ConstraintKind as K;
-
-        let need = |what: &str| Err(format!("{} needs {what}", constraint.kind.name()));
-        if built.refs.len() != 2 {
-            return need("two objects");
-        }
-        if constraint.refs.iter().any(|reference| model.is_spline(reference)) {
-            return Self::spline_form(built, model, values);
-        }
-
-        let line = |index| r_at(constraint, index).and_then(|reference| model.line(values, reference));
-        let circle = |index| r_at(constraint, index).and_then(|reference| model.circle(values, reference));
-        let ellipse = |index| r_at(constraint, index).and_then(|reference| model.ellipse(values, reference));
-        built.rows = 1;
-
-        if let (Some((start, end)), Some((center, _))) = (line(0), circle(1)) {
-            built.form = Form::LC { swap: false };
-            built.sign = sgn(dir_n(start, end).cross(center - start));
-        } else if let (Some((start, end)), Some((center, _))) = (line(1), circle(0)) {
-            built.form = Form::LC { swap: true };
-            built.sign = sgn(dir_n(start, end).cross(center - start));
-        } else if let (Some((first_center, first_radius)), Some((second_center, second_radius))) = (circle(0), circle(1)) {
-            built.form = Form::CC;
-            // sign > 0: external tangency; < 0: internal.
-            let distance = first_center.dist(second_center);
-            built.sign = if distance >= first_radius.abs().max(second_radius.abs()) { 1.0 } else { -1.0 };
-            built.target = sgn(first_radius - second_radius);
-        } else if let (Some((start, end)), Some(ellipse)) = (line(0), ellipse(1)) {
-            built.form = Form::LE { swap: false };
-            built.sign = sgn(dir_n(start, end).cross(ellipse.c - start));
-        } else if let (Some((start, end)), Some(ellipse)) = (line(1), ellipse(0)) {
-            built.form = Form::LE { swap: true };
-            built.sign = sgn(dir_n(start, end).cross(ellipse.c - start));
-        } else if (circle(0).is_some() || ellipse(0).is_some()) && (circle(1).is_some() || ellipse(1).is_some()) {
-            built.form = Form::Contact;
-            built.rows = 3;
-            built.aux_init =
-                built.contact_guess(model, values).ok_or_else(|| format!("{} could not find where the curves touch", constraint.kind.name()))?;
-        } else if line(0).is_some() && line(1).is_some() && constraint.kind == K::Smooth {
-            built.form = Form::LL;
-        } else {
-            return need("a line and a circle/arc/ellipse, two curves, or a spline end and a curve");
-        }
-
-        Ok(built)
-    }
-
    fn spline_form(mut b: Built, m: &Model, x: &[f64]) -> Result<Built, String> {
        let (Some(r0), Some(r1)) = (b.refs.first().copied(), b.refs.get(1).copied()) else {
            return Err(format!("{} needs two objects", b.kind.name()));
@@ -463,292 +596,3 @@ impl Built {
        if self.kind == ConstraintKind::Angular { v.to_degrees() } else { v }
    }
 }
-
-/// Shared access to a constraint's geometry, values, and output while evaluating one residual.
-struct ResidualEval<'a> {
-    built: &'a Built,
-    model: &'a Model,
-    values: &'a [f64],
-    out: &'a mut Vec<f64>,
-}
-
-impl ResidualEval<'_> {
-    fn evaluate(&mut self) -> Option<()> {
-        use ConstraintKind as K;
-
-        match (self.built.kind, self.built.form) {
-            (_, Form::Lock) => Some(()),
-            (_, Form::PE { swap }) => self.eval_point_ellipse(swap),
-            (_, Form::LE { swap }) => self.eval_line_ellipse(swap),
-            (_, Form::Contact) => self.eval_contact(),
-            (_, Form::EndOn { spline, at_end }) => self.eval_end_on(spline, at_end),
-            (_, Form::Join { a_end, b_end, g2 }) => self.eval_join(a_end, b_end, g2),
-            (_, Form::Anchor(anchor)) => self.eval_anchor(anchor),
-            (K::Coincident, Form::PP) => self.eval_coincident_points(),
-            (K::Coincident, Form::PL { swap }) => self.eval_point_line(swap),
-            (K::Coincident, Form::PC { swap }) => self.eval_point_circle(swap),
-            (K::Horizontal | K::Vertical, form) => self.eval_horizontal_vertical(form),
-            (K::Parallel | K::Smooth, Form::LL) => self.eval_parallel(),
-            (K::Perpendicular, _) => self.eval_perpendicular(),
-            (K::Collinear, _) => self.eval_collinear(),
-            (K::Concentric, _) => self.eval_concentric(),
-            (K::Equal, Form::LL) => self.eval_equal_lines(),
-            (K::Equal, _) => self.eval_equal_circles(),
-            (K::Tangent | K::Smooth, Form::LC { swap }) => self.eval_tangent_line_circle(swap),
-            (K::Tangent | K::Smooth, _) => self.eval_tangent_circles(),
-            (K::Symmetric, Form::PP) => self.eval_symmetric_points(),
-            (K::Symmetric, Form::SymLines { crossed }) => self.eval_symmetric_lines(crossed),
-            (K::Symmetric, _) => self.eval_symmetric_circles(),
-            (K::Distance(axis), form) => self.eval_distance(axis, form),
-            (K::Angular, Form::ArcSweep) => self.eval_angular_arc(),
-            (K::Angular, Form::Rays { rev }) => self.eval_angular_rays(rev),
-            (K::Radius, _) => self.eval_radius(),
-            (K::Diameter, _) => self.eval_diameter(),
-            _ => Some(()),
-        }
-    }
-
-    fn reference(&self, index: usize) -> Option<&GeomRef> {
-        self.built.refs.get(index)
-    }
-
-    fn point(&self, index: usize) -> Option<Vec2> {
-        self.model.point(self.values, self.reference(index)?)
-    }
-
-    fn line(&self, index: usize) -> Option<(Vec2, Vec2)> {
-        self.model.line(self.values, self.reference(index)?)
-    }
-
-    fn circle(&self, index: usize) -> Option<(Vec2, f64)> {
-        self.model.circle(self.values, self.reference(index)?)
-    }
-
-    fn ellipse(&self, index: usize) -> Option<Ell> {
-        self.model.ellipse(self.values, self.reference(index)?)
-    }
-
-    fn eval_point_ellipse(&mut self, swap: bool) -> Option<()> {
-        let (point, ellipse) = if swap { (self.point(1)?, self.ellipse(0)?) } else { (self.point(0)?, self.ellipse(1)?) };
-        self.out.push(ellipse.on(point));
-        Some(())
-    }
-
-    fn eval_line_ellipse(&mut self, swap: bool) -> Option<()> {
-        let (line, ellipse) = if swap { (self.line(1)?, self.ellipse(0)?) } else { (self.line(0)?, self.ellipse(1)?) };
-        let (start, end) = line;
-        let direction = dir_n(start, end);
-        self.out.push(self.built.sign * direction.cross(ellipse.c - start) - ellipse.support(direction.perp()));
-        Some(())
-    }
-
-    fn eval_contact(&mut self) -> Option<()> {
-        let first_parameter = *self.values.get(self.built.aux)?;
-        let second_parameter = *self.values.get(self.built.aux + 1)?;
-        let (first_point, first_tangent) = self.built.curve_at(self.model, self.values, 0, first_parameter)?;
-        let (second_point, second_tangent) = self.built.curve_at(self.model, self.values, 1, second_parameter)?;
-        self.out.extend([
-            first_point.x - second_point.x,
-            first_point.y - second_point.y,
-            first_tangent.normalized().cross(second_tangent.normalized()),
-        ]);
-        Some(())
-    }
-
-    fn eval_end_on(&mut self, spline: usize, at_end: bool) -> Option<()> {
-        let frame = self.model.end_frame(self.values, self.reference(spline)?, at_end)?;
-        let other = 1 - spline.min(1);
-        if let Some((start, end)) = self.line(other) {
-            let direction = dir_n(start, end);
-            self.out.extend([direction.cross(frame.p - start), frame.t.cross(direction)]);
-        } else if let Some((center, radius)) = self.circle(other) {
-            self.out.extend([frame.p.dist(center) - radius, frame.t.dot(dir_n(center, frame.p))]);
-        } else {
-            let ellipse = self.ellipse(other)?;
-            self.out.extend([ellipse.on(frame.p), frame.t.dot(ellipse.normal(frame.p))]);
-        }
-        Some(())
-    }
-
-    fn eval_join(&mut self, a_end: bool, b_end: bool, g2: bool) -> Option<()> {
-        let first = self.model.end_frame(self.values, self.reference(0)?, a_end)?;
-        let second = self.model.end_frame(self.values, self.reference(1)?, b_end)?;
-        let first = if a_end { first } else { first.reversed() };
-        let second = if b_end { second.reversed() } else { second };
-        self.out.extend([first.p.x - second.p.x, first.p.y - second.p.y, first.t.cross(second.t)]);
-        if g2 {
-            self.out.push(first.k - second.k);
-        }
-        Some(())
-    }
-
-    fn eval_anchor(&mut self, anchor: Vec2) -> Option<()> {
-        let point = self.point(0)?;
-        self.out.extend([point.x - anchor.x, point.y - anchor.y]);
-        Some(())
-    }
-
-    fn eval_coincident_points(&mut self) -> Option<()> {
-        let (first, second) = (self.point(0)?, self.point(1)?);
-        self.out.extend([first.x - second.x, first.y - second.y]);
-        Some(())
-    }
-
-    fn eval_point_line(&mut self, swap: bool) -> Option<()> {
-        let (point, (start, end)) = if swap { (self.point(1)?, self.line(0)?) } else { (self.point(0)?, self.line(1)?) };
-        self.out.push(dir_n(start, end).cross(point - start));
-        Some(())
-    }
-
-    fn eval_point_circle(&mut self, swap: bool) -> Option<()> {
-        let (point, (center, radius)) = if swap { (self.point(1)?, self.circle(0)?) } else { (self.point(0)?, self.circle(1)?) };
-        self.out.push(point.dist(center) - radius);
-        Some(())
-    }
-
-    fn eval_horizontal_vertical(&mut self, form: Form) -> Option<()> {
-        use ConstraintKind as K;
-
-        let (first, second) = if form == Form::L1 {
-            self.line(0).or_else(|| self.ellipse(0).map(|ellipse| (ellipse.c - ellipse.mj, ellipse.c + ellipse.mj)))?
-        } else {
-            (self.point(0)?, self.point(1)?)
-        };
-        let value = if self.built.kind == K::Horizontal { first.y - second.y } else { first.x - second.x };
-        self.out.push(value);
-        Some(())
-    }
-
-    fn eval_parallel(&mut self) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end)) = (self.line(0)?, self.line(1)?);
-        self.out.push(dir_n(first_start, first_end).cross(dir_n(second_start, second_end)));
-        Some(())
-    }
-
-    fn eval_perpendicular(&mut self) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end)) = (self.line(0)?, self.line(1)?);
-        self.out.push(dir_n(first_start, first_end).dot(dir_n(second_start, second_end)));
-        Some(())
-    }
-
-    fn eval_collinear(&mut self) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end)) = (self.line(0)?, self.line(1)?);
-        let direction = dir_n(first_start, first_end);
-        self.out.extend([direction.cross(second_start - first_start), direction.cross(second_end - first_start)]);
-        Some(())
-    }
-
-    fn eval_concentric(&mut self) -> Option<()> {
-        let center = |index| {
-            self.circle(index).map(|(center, _)| center).or_else(|| self.ellipse(index).map(|ellipse| ellipse.c)).or_else(|| self.point(index))
-        };
-        let (first, second) = (center(0)?, center(1)?);
-        self.out.extend([first.x - second.x, first.y - second.y]);
-        Some(())
-    }
-
-    fn eval_equal_lines(&mut self) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end)) = (self.line(0)?, self.line(1)?);
-        self.out.push(first_start.dist(first_end) - second_start.dist(second_end));
-        Some(())
-    }
-
-    fn eval_equal_circles(&mut self) -> Option<()> {
-        let ((_, first_radius), (_, second_radius)) = (self.circle(0)?, self.circle(1)?);
-        self.out.push(first_radius - second_radius);
-        Some(())
-    }
-
-    fn eval_tangent_line_circle(&mut self, swap: bool) -> Option<()> {
-        let ((start, end), (center, radius)) = if swap { (self.line(1)?, self.circle(0)?) } else { (self.line(0)?, self.circle(1)?) };
-        self.out.push(self.built.sign * dir_n(start, end).cross(center - start) - radius);
-        Some(())
-    }
-
-    fn eval_tangent_circles(&mut self) -> Option<()> {
-        let ((first_center, first_radius), (second_center, second_radius)) = (self.circle(0)?, self.circle(1)?);
-        let distance = first_center.dist(second_center);
-        let residual = if self.built.sign > 0.0 {
-            distance - (first_radius + second_radius)
-        } else {
-            distance - self.built.target * (first_radius - second_radius)
-        };
-        self.out.push(residual);
-        Some(())
-    }
-
-    fn eval_symmetric_points(&mut self) -> Option<()> {
-        let (first, second, (line_start, line_end)) = (self.point(0)?, self.point(1)?, self.line(2)?);
-        let direction = dir_n(line_start, line_end);
-        self.out.extend([direction.cross(first.mid(second) - line_start), direction.dot(second - first)]);
-        Some(())
-    }
-
-    fn eval_symmetric_lines(&mut self, crossed: bool) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end), (line_start, line_end)) = (self.line(0)?, self.line(1)?, self.line(2)?);
-        let (second_start, second_end) = if crossed { (second_end, second_start) } else { (second_start, second_end) };
-        let direction = dir_n(line_start, line_end);
-        self.out.extend([
-            direction.cross(first_start.mid(second_start) - line_start),
-            direction.dot(second_start - first_start),
-            direction.cross(first_end.mid(second_end) - line_start),
-            direction.dot(second_end - first_end),
-        ]);
-        Some(())
-    }
-
-    fn eval_symmetric_circles(&mut self) -> Option<()> {
-        let ((first_center, first_radius), (second_center, second_radius), (line_start, line_end)) =
-            (self.circle(0)?, self.circle(1)?, self.line(2)?);
-        let direction = dir_n(line_start, line_end);
-        self.out.extend([
-            direction.cross(first_center.mid(second_center) - line_start),
-            direction.dot(second_center - first_center),
-            first_radius - second_radius,
-        ]);
-        Some(())
-    }
-
-    fn eval_distance(&mut self, axis: DistAxis, form: Form) -> Option<()> {
-        let value = match (axis, form) {
-            (_, Form::PL { swap }) => {
-                let (point, (start, end)) = if swap { (self.point(1)?, self.line(0)?) } else { (self.point(0)?, self.line(1)?) };
-                dir_n(start, end).cross(point - start)
-            }
-            _ => {
-                let (first, second) = if form == Form::L1 { self.line(0)? } else { (self.point(0)?, self.point(1)?) };
-                match axis {
-                    DistAxis::Aligned => first.dist(second),
-                    DistAxis::Horizontal => second.x - first.x,
-                    DistAxis::Vertical => second.y - first.y,
-                }
-            }
-        };
-        self.out.push(self.built.sign * value - self.built.target);
-        Some(())
-    }
-
-    fn eval_angular_arc(&mut self) -> Option<()> {
-        let reference = self.reference(0)?;
-        self.out.push(self.model.arc_sweep(self.values, reference)? - self.built.target);
-        Some(())
-    }
-
-    fn eval_angular_rays(&mut self, reversed: [bool; 2]) -> Option<()> {
-        let ((first_start, first_end), (second_start, second_end)) = (self.line(0)?, self.line(1)?);
-        let (first, second) = (ray(first_start, first_end, reversed[0]), ray(second_start, second_end, reversed[1]));
-        let residual = wrap(first.cross(second).atan2(first.dot(second)) - self.built.sign * self.built.target);
-        self.out.push(residual);
-        Some(())
-    }
-
-    fn eval_radius(&mut self) -> Option<()> {
-        self.out.push(self.circle(0)?.1 - self.built.target);
-        Some(())
-    }
-
-    fn eval_diameter(&mut self) -> Option<()> {
-        self.out.push(2.0 * self.circle(0)?.1 - self.built.target);
-        Some(())
-    }
-}
@@ -5,7 +5,7 @@
 //! whose `ACAD_ENHANCEDBLOCK` entry is an evaluation graph (`ACAD_EVALUATION_GRAPH`), and the
 //! graph lists the block's *parameters* (a distance, a point, visibility states, a lookup…) and
 //! *actions* (what changing a parameter does to the block's objects: stretch, move, look up…).
-//! [`dynamic_block`](crate::dynblock::dynamic_block) reads them into the model below without changing the kept data, so a drawing
+//! [`dynamic_block`] reads them into the model below without changing the kept data, so a drawing
 //! saved again still carries them exactly as read.
 //!
 //! Every count and index here comes from the file: they are capped by the data actually present
@@ -9,6 +9,130 @@ use serde::{Deserialize, Serialize};
 mod mline;
 pub use mline::*;

+/// A database handle (DXF group 5), unique per drawing.
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, PartialOrd, Ord, Serialize, Deserialize)]
+pub struct Handle(pub u64);
+
+impl Handle {
+    pub fn hex(self) -> String {
+        format!("{:X}", self.0)
+    }
+    pub fn parse_hex(s: &str) -> Option<Handle> {
+        let s = s.trim();
+        if !s.bytes().all(|b| b.is_ascii_hexdigit()) {
+            return None;
+        }
+        u64::from_str_radix(s, 16).ok().map(Handle)
+    }
+}
+
+/// Lineweight in hundredths of a millimetre, or a logical value.
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum Lineweight {
+    #[default]
+    ByLayer,
+    ByBlock,
+    Default,
+    /// 0..=211 (hundredths of mm).
+    Mm100(u16),
+}
+
+impl Lineweight {
+    /// The standard lineweight values (mm × 100).
+    pub const STANDARD: [u16; 24] = [0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90, 100, 106, 120, 140, 158, 200, 211];
+    pub fn to_dxf(self) -> i16 {
+        match self {
+            Lineweight::ByLayer => -1,
+            Lineweight::ByBlock => -2,
+            Lineweight::Default => -3,
+            Lineweight::Mm100(v) => v.min(211) as i16,
+        }
+    }
+    pub fn from_dxf(v: i16) -> Lineweight {
+        match v {
+            -2 => Lineweight::ByBlock,
+            -3 => Lineweight::Default,
+            0..=211 => Lineweight::Mm100(v as u16),
+            _ => Lineweight::ByLayer,
+        }
+    }
+    pub fn name(self) -> String {
+        match self {
+            Lineweight::ByLayer => "ByLayer".into(),
+            Lineweight::ByBlock => "ByBlock".into(),
+            Lineweight::Default => "Default".into(),
+            Lineweight::Mm100(v) => format!("{:.2} mm", f64::from(v) / 100.0),
+        }
+    }
+}
+
+/// Transparency: ByLayer, ByBlock, or 0..=90 percent.
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum Transparency {
+    #[default]
+    ByLayer,
+    ByBlock,
+    Percent(u8),
+}
+
+impl Transparency {
+    /// "ByLayer", "ByBlock" or the percentage ("50").
+    pub fn name(&self) -> String {
+        match self {
+            Transparency::ByLayer => "ByLayer".into(),
+            Transparency::ByBlock => "ByBlock".into(),
+            Transparency::Percent(p) => p.to_string(),
+        }
+    }
+}
+
+/// Properties every entity has.
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct Common {
+    pub layer: String,
+    pub color: Color,
+    pub linetype: String,
+    pub lineweight: Lineweight,
+    pub ltscale: f64,
+    pub transparency: Transparency,
+    pub visible: bool,
+    pub thickness: f64,
+    pub extrusion: Vec3,
+    /// Named plot style: `ByLayer`, `ByBlock` or a style of the layout's named (`.stb`) plot
+    /// style table.
+    pub plot_style: String,
+    /// The annotation scales an annotative object supports (empty: not annotative).
+    #[serde(skip_serializing_if = "Vec::is_empty")]
+    pub anno_scales: Vec<crate::AnnoScale>,
+    /// Other applications' extended data (xdata) as read from the drawing file: whole
+    /// applications, each from its `1001` group on. It is part of the object, so a copy of the
+    /// object (COPY, MIRROR, ARRAY, paste) carries it, as in AutoCAD.
+    #[serde(skip_serializing_if = "Vec::is_empty")]
+    pub xdata: Vec<RawTag>,
+}
+
+impl Default for Common {
+    fn default() -> Self {
+        Common {
+            layer: "0".into(),
+            color: Color::ByLayer,
+            linetype: "ByLayer".into(),
+            lineweight: Lineweight::ByLayer,
+            ltscale: 1.0,
+            transparency: Transparency::ByLayer,
+            visible: true,
+            thickness: 0.0,
+            extrusion: Vec3::Z,
+            plot_style: "ByLayer".into(),
+            anno_scales: Vec::new(),
+            xdata: Vec::new(),
+        }
+    }
+}
+
 #[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
 pub struct Entity {
    pub handle: Handle,
@@ -22,6 +146,108 @@ impl Entity {
        Entity { handle, common: Common::default(), kind }
    }
 }
+
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Line {
+    pub a: Vec3,
+    pub b: Vec3,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Point {
+    pub p: Vec3,
+    #[serde(default)]
+    pub angle: f64,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Circle {
+    pub center: Vec3,
+    pub radius: f64,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Arc {
+    pub center: Vec3,
+    pub radius: f64,
+    /// Radians, CCW.
+    pub start: f64,
+    pub end: f64,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Ellipse {
+    pub center: Vec3,
+    pub major: Vec3,
+    pub ratio: f64,
+    pub start: f64,
+    pub end: f64,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct LwPolyline {
+    pub vertices: Vec<PolyVertex>,
+    pub closed: bool,
+    #[serde(default)]
+    pub const_width: f64,
+    #[serde(default)]
+    pub elevation: f64,
+    /// Polyline linetype generation (PLINEGEN).
+    #[serde(default)]
+    pub plinegen: bool,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Polyline3d {
+    pub points: Vec<Vec3>,
+    pub closed: bool,
+}
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum HAlign {
+    #[default]
+    Left,
+    Center,
+    Right,
+    Aligned,
+    Middle,
+    Fit,
+}
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum VAlign {
+    #[default]
+    Baseline,
+    Bottom,
+    Middle,
+    Top,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Text {
+    pub insert: Vec3,
+    #[serde(default)]
+    pub align_pt: Option<Vec3>,
+    pub height: f64,
+    pub value: String,
+    #[serde(default)]
+    pub rotation: f64,
+    #[serde(default = "one")]
+    pub width_factor: f64,
+    #[serde(default)]
+    pub oblique: f64,
+    #[serde(default = "standard")]
+    pub style: String,
+    #[serde(default)]
+    pub halign: HAlign,
+    #[serde(default)]
+    pub valign: VAlign,
+}
+impl Text {
+    /// The point the text is placed by, as the Insertion snap and the grip show it: the alignment
+    /// point (DXF group 11) of justified text, the start point (group 10) of left-baseline,
+    /// aligned and fit text.
+    pub fn justify_point(&self) -> Vec2 {
+        match (self.halign, self.valign) {
+            (HAlign::Left, VAlign::Baseline) | (HAlign::Aligned | HAlign::Fit, _) => self.insert.xy(),
+            _ => self.align_pt.unwrap_or(self.insert).xy(),
+        }
+    }
+}
 fn one() -> f64 {
    1.0
 }
@@ -31,27 +257,720 @@ fn standard() -> String {

 mod helix;
 pub use helix::*;
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct MText {
+    pub insert: Vec3,
+    pub height: f64,
+    /// Reference rectangle width (0 = no wrapping).
+    #[serde(default)]
+    pub width: f64,
+    /// 1..=9: TL TC TR ML MC MR BL BC BR.
+    #[serde(default = "attach_tl")]
+    pub attach: u8,
+    #[serde(default)]
+    pub rotation: f64,
+    #[serde(default = "standard")]
+    pub style: String,
+    /// Raw MTEXT contents with inline codes (\P, {\fArial|b1;...}, \S1/2; …).
+    pub contents: String,
+    #[serde(default = "one")]
+    pub line_spacing: f64,
+    /// Line spacing style (DXF 73): Exactly (`true`) keeps `line_spacing` whatever the character
+    /// heights; At least (`false`, the default) lets taller characters push lines apart.
+    #[serde(default)]
+    pub line_spacing_exact: bool,
+    /// Columns the text flows through, each `width` wide (DXF 75/76/78/79/48/49/50); `None`:
+    /// one column.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub columns: Option<MTextColumns>,
+}
+fn attach_tl() -> u8 {
+    1
+}
+
+/// Static columns: a fixed number of columns of one height. Dynamic columns: as many columns
+/// as the text needs, of one height (auto height) or each its own (manual heights).
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum MTextColumnType {
+    #[default]
+    Static,
+    Dynamic,
+}
+
+/// MTEXT columns (MTEXT Columns option, DXF Reference MTEXT groups 75–79, 48–50).
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct MTextColumns {
+    #[serde(rename = "type")]
+    pub kind: MTextColumnType,
+    /// Number of columns (static columns: the columns there are).
+    pub count: u16,
+    /// Space between two columns.
+    pub gutter: f64,
+    /// Height of every column (static, and dynamic with auto height).
+    pub height: f64,
+    /// Dynamic columns: one height for all columns (`height`) instead of `heights`.
+    pub auto_height: bool,
+    /// Dynamic columns with manual heights: the height of each column.
+    #[serde(skip_serializing_if = "Vec::is_empty")]
+    pub heights: Vec<f64>,
+    /// Columns run right to left.
+    pub flow_reversed: bool,
+}
+
+impl MTextColumns {
+    /// The width of `count` columns of `column_width` and their gutters.
+    pub fn total_width(&self, column_width: f64) -> f64 {
+        let n = f64::from(self.count.max(1));
+        column_width * n + self.gutter.max(0.0) * (n - 1.0)
+    }
+
+    /// The tallest column.
+    pub fn max_height(&self) -> f64 {
+        self.heights.iter().copied().fold(self.height, f64::max).max(0.0)
+    }
+
+    /// Scale every length (SCALE, block insertion).
+    pub fn scale(&mut self, s: f64) {
+        self.gutter *= s;
+        self.height *= s;
+        self.heights.iter_mut().for_each(|h| *h *= s);
+    }
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Attrib {
+    pub tag: String,
+    pub text: Text,
+    #[serde(default)]
+    pub invisible: bool,
+    #[serde(default)]
+    pub constant: bool,
+    #[serde(default)]
+    pub prompt: String,
+    /// An attribute's own properties; each one left unset follows the attribute definition.
+    #[serde(default, skip_serializing_if = "AttribProps::is_empty")]
+    pub props: AttribProps,
+    /// A multiline attribute (DXF attribute type 2, or 4 for a definition): its text as
+    /// multiline text. `text.value` holds the plain text, which value edits change.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub multiline: Option<MultilineAttrib>,
+    /// Its other modes: Verify, Preset and Lock position.
+    #[serde(default, skip_serializing_if = "AttribModes::is_default")]
+    pub modes: AttribModes,
+}
+
+/// An attribute's modes beyond invisible and constant.
+#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct AttribModes {
+    /// Verify: the value is asked for twice when the block is inserted (DXF flag 4).
+    #[serde(default)]
+    pub verify: bool,
+    /// Preset: the default value is used without asking (DXF flag 8).
+    #[serde(default)]
+    pub preset: bool,
+    /// Lock position: the attribute can't be moved on its own within a reference (DXF group
+    /// 280 after the flags). A reference's attributes take it from their definitions.
+    #[serde(default)]
+    pub lock_position: bool,
+}
+
+impl AttribModes {
+    pub fn is_default(&self) -> bool {
+        *self == Self::default()
+    }
+    /// The modes of a reference's attribute made from a definition with these: AutoCAD keeps
+    /// only Lock position there.
+    pub fn for_reference(self) -> Self {
+        AttribModes { lock_position: self.lock_position, ..Self::default() }
+    }
+}
+
+/// The multiline text of a multiline attribute.
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct MultilineAttrib {
+    pub mtext: MText,
+    /// The plain text `mtext`'s contents read as: an attribute whose value differs was edited
+    /// since, and its value replaces the contents.
+    pub read_as: String,
+}
+
+impl MultilineAttrib {
+    /// This text placed by `m` (a block reference's transform, for its attribute made from a
+    /// definition).
+    pub fn transformed(&self, m: &Mat3) -> MultilineAttrib {
+        let mut k = EntityKind::MText(self.mtext.clone());
+        k.transform(m);
+        let mtext = if let EntityKind::MText(t) = k { t } else { self.mtext.clone() };
+        MultilineAttrib { mtext, read_as: self.read_as.clone() }
+    }
+}
+
+impl Attrib {
+    /// Move a multiline attribute's text by `m` along with the attribute (nothing for others).
+    pub fn transform_multiline(&mut self, m: &Mat3) {
+        if let Some(ml) = &mut self.multiline {
+            *ml = ml.transformed(m);
+        }
+    }
+
+    /// A multiline attribute's text as drawn and saved: its multiline text, with the contents
+    /// replaced by the value when the value was edited since it was read.
+    pub fn multiline_text(&self) -> Option<MText> {
+        let m = self.multiline.as_ref()?;
+        let mut t = m.mtext.clone();
+        if self.text.value != m.read_as {
+            t.contents = mtext_literal(&self.text.value);
+        }
+        Some(t)
+    }
+}
+
+/// `s` as MTEXT contents that read back as `s`: backslashes and braces escaped, line breaks as
+/// paragraph breaks.
+pub fn mtext_literal(s: &str) -> String {
+    let mut out = String::with_capacity(s.len());
+    for c in s.chars() {
+        match c {
+            '\\' => out.push_str("\\\\"),
+            '{' => out.push_str("\\{"),
+            '}' => out.push_str("\\}"),
+            '\n' => out.push_str("\\P"),
+            '\r' => {}
+            c => out.push(c),
+        }
+    }
+    out
+}
+
+/// Properties set on one attribute of a block reference (an ATTRIB's layer, colour, linetype and
+/// lineweight), overriding those of its definition.
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct AttribProps {
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub layer: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub color: Option<Color>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub linetype: Option<String>,
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub lineweight: Option<Lineweight>,
+}
+
+impl AttribProps {
+    /// Nothing set: the attribute is drawn with its definition's properties.
+    pub fn is_empty(&self) -> bool {
+        *self == AttribProps::default()
+    }
+    /// `base` (the definition's properties) with the ones set here in place.
+    pub fn over(&self, base: &Common) -> Common {
+        Common {
+            layer: self.layer.clone().unwrap_or_else(|| base.layer.clone()),
+            color: self.color.unwrap_or(base.color),
+            linetype: self.linetype.clone().unwrap_or_else(|| base.linetype.clone()),
+            lineweight: self.lineweight.unwrap_or(base.lineweight),
+            ..base.clone()
+        }
+    }
+}
+
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Insert {
+    pub block: String,
+    pub insert: Vec3,
+    #[serde(default = "unit_scale")]
+    pub scale: Vec3,
+    #[serde(default)]
+    pub rotation: f64,
+    #[serde(default)]
+    pub attribs: Vec<Attrib>,
+    #[serde(default = "one_u")]
+    pub cols: u32,
+    #[serde(default = "one_u")]
+    pub rows: u32,
+    #[serde(default)]
+    pub col_spacing: f64,
+    #[serde(default)]
+    pub row_spacing: f64,
+}
+fn unit_scale() -> Vec3 {
+    Vec3::new(1.0, 1.0, 1.0)
+}
+fn one_u() -> u32 {
+    1
+}
+impl Insert {
+    /// Block-to-world transform (2D part).
+    pub fn transform(&self, base: Vec2) -> Mat3 {
+        Mat3::translate(self.insert.xy())
+            .then_before(Mat3::rotate(self.rotation))
+            .then_before(Mat3::scale(self.scale.x, self.scale.y))
+            .then_before(Mat3::translate(-base))
+    }
+}
+#[derive(Clone, Copy, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum DimKind {
+    /// Rotated linear dimension (horizontal = 0, vertical = 90°).
+    Linear {
+        rotation: f64,
+    },
+    Aligned,
+    Angular,
+    Angular3P,
+    Diameter,
+    Radius,
+    Ordinate {
+        x_type: bool,
+    },
+    ArcLength,
+}
+/// A dimension. Definition points follow DXF: `defpt` (10: dimension line point),
+/// `p13`/`p14` (extension origins), `p15`/`p16` (arc/angle points), `text_mid` (11).
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Dimension {
+    pub kind: DimKind,
+    pub defpt: Vec3,
+    pub text_mid: Vec3,
+    #[serde(default)]
+    pub p13: Vec3,
+    #[serde(default)]
+    pub p14: Vec3,
+    #[serde(default)]
+    pub p15: Vec3,
+    #[serde(default)]
+    pub p16: Vec3,
+    /// "" = measured value, "<>" inside = measurement placeholder, " " = suppressed.
+    #[serde(default)]
+    pub text: String,
+    #[serde(default = "standard")]
+    pub style: String,
+    #[serde(default)]
+    pub measurement: f64,
+    #[serde(default)]
+    pub text_rotation: f64,
+    /// User moved the text (text_mid is authoritative).
+    #[serde(default)]
+    pub user_text_pos: bool,
+    /// Anonymous block with the rendered geometry (from files); regenerated when edited.
+    #[serde(default)]
+    pub block: Option<String>,
+    /// Per-dimension style overrides (DIMOVERRIDE): DimStyle field names (camelCase) → values,
+    /// merged over the named style.
+    #[serde(default, skip_serializing_if = "serde_json::Map::is_empty")]
+    pub overrides: serde_json::Map<String, serde_json::Value>,
+    /// Associativity: which definition points follow which objects.
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub assoc: Vec<DimAssoc>,
+    /// Oblique extension lines, jogs, breaks and inspection frames.
+    #[serde(default, skip_serializing_if = "DimMarks::is_empty")]
+    pub marks: DimMarks,
+}
+
+/// What dimension edits add to a dimension's drawing: DIMEDIT Oblique, DIMJOGLINE, DIMJOGGED,
+/// DIMBREAK and DIMINSPECT.
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct DimMarks {
+    /// Angle (radians) of the extension lines of a linear or aligned dimension; None =
+    /// perpendicular to the dimension line.
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub oblique: Option<f64>,
+    /// A jog on the dimension line of a linear or aligned dimension, at this point (DIMJOGLINE).
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub jog_line: Option<Vec3>,
+    /// A jogged radius dimension (DIMJOGGED).
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub jogged: Option<JoggedRadius>,
+    /// Gaps in the dimension and extension lines (DIMBREAK).
+    #[serde(skip_serializing_if = "Vec::is_empty")]
+    pub breaks: Vec<DimBreak>,
+    /// Inspection frame, label and rate (DIMINSPECT).
+    #[serde(skip_serializing_if = "Option::is_none")]
+    pub inspect: Option<Inspection>,
+}
+
+impl DimMarks {
+    pub fn is_empty(&self) -> bool {
+        *self == DimMarks::default()
+    }
+
+    /// Transform the points and angles (part of [`EntityKind::transform`]).
+    fn transform(&mut self, t3: &dyn Fn(&mut Vec3), rot: f64, s: f64, mirror: bool) {
+        if let Some(a) = &mut self.oblique {
+            *a = cadcraft_geom::norm_angle(if mirror { rot - (*a - rot) } else { *a + rot });
+        }
+        if let Some(j) = &mut self.jog_line {
+            t3(j);
+        }
+        if let Some(j) = &mut self.jogged {
+            t3(&mut j.center);
+            t3(&mut j.jog);
+        }
+        for b in &mut self.breaks {
+            t3(&mut b.at);
+            b.size *= s;
+        }
+    }
+}
+
+/// The definition of a jogged radius dimension: the dimension line starts at an overriding
+/// centre and jogs on its way to the arc.
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct JoggedRadius {
+    /// Where the dimension line starts instead of the true centre.
+    pub center: Vec3,
+    /// The middle of the jog.
+    pub jog: Vec3,
+}
+
+/// A gap in a dimension's lines: everything within `size / 2` of `at` is left out.
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct DimBreak {
+    pub at: Vec3,
+    pub size: f64,
+    /// Made by DIMBREAK Auto (recomputed by the next Auto) rather than picked by hand.
+    pub auto: bool,
+}
+
+/// An inspection dimension (DIMINSPECT).
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(default, rename_all = "camelCase")]
+pub struct Inspection {
+    /// Frame shape: 0 round ends, 1 angular ends, 2 none.
+    pub shape: u8,
+    /// Text left of the value ("" = none).
+    pub label: String,
+    /// Inspection rate right of the value ("" = none).
+    pub rate: String,
+}
+
+/// A dimension definition point that follows an object (associative dimensions).
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct DimAssoc {
+    /// Definition point: "defpt", "p13", "p14", "p15" or "p16".
+    pub point: String,
+    /// The object it is attached to.
+    pub handle: Handle,
+    pub snap: AssocSnap,
+}
+
+/// Where on the object an associative definition point sits.
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub enum AssocSnap {
+    /// Start point of a line/arc (or polyline vertex 0).
+    Start,
+    /// End point of a line/arc.
+    End,
+    Mid,
+    /// Centre of a circle/arc.
+    Center,
+    /// On a circle/arc at a fixed angle (radians) from its centre.
+    OnCircle {
+        angle: f64,
+    },
+    /// Intersection of this (line) object with another line.
+    Intersection {
+        other: Handle,
+    },
+    /// Vertex `index` of a polyline.
+    Vertex {
+        index: usize,
+    },
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Leader {
+    pub vertices: Vec<Vec3>,
+    #[serde(default = "yes")]
+    pub arrow: bool,
+    #[serde(default)]
+    pub spline: bool,
+    #[serde(default = "standard")]
+    pub style: String,
+}
 fn yes() -> bool {
    true
 }
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct MLeader {
+    pub leaders: Vec<Vec<Vec3>>,
+    pub landing: Vec3,
+    pub dogleg: f64,
+    pub text: Option<MText>,
+    #[serde(default = "standard")]
+    pub style: String,
+    #[serde(default = "one")]
+    pub arrow_size: f64,
+    /// Leader lines are smooth curves through their points (leader type Spline). An empty
+    /// `leaders` is a multileader without a leader line (leader type None).
+    #[serde(default)]
+    pub spline: bool,
+    /// Block content in place of the text: a block reference placed at the landing.
+    #[serde(default)]
+    pub block: Option<Insert>,
+}
+
+impl MLeader {
+    /// Each leader line as drawn: through its points to the landing, smoothed for spline leaders.
+    pub fn leader_paths(&self) -> Vec<Vec<Vec2>> {
+        self.leaders
+            .iter()
+            .map(|l| {
+                let pts: Vec<Vec2> = l.iter().map(|v| v.xy()).chain(std::iter::once(self.landing.xy())).collect();
+                if self.spline && pts.len() > 2 { GSpline::from_fit_points(&pts).tessellate(1e-3) } else { pts }
+            })
+            .collect()
+    }
+}
+/// A hatch boundary loop: closed polyline with bulges.
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct HatchLoop {
+    pub vertices: Vec<PolyVertex>,
+    #[serde(default)]
+    pub outer: bool,
+    /// The objects the loop was made from (DXF group 97 count, 330 handles): an associative
+    /// hatch re-fills the loop from them when they change.
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub sources: Vec<Handle>,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Hatch {
+    pub pattern: String,
+    pub solid: bool,
+    pub loops: Vec<HatchLoop>,
+    #[serde(default = "one")]
+    pub scale: f64,
+    #[serde(default)]
+    pub angle: f64,
+    #[serde(default)]
+    pub associative: bool,
+    /// 0 normal (odd parity), 1 outer, 2 ignore.
+    #[serde(default)]
+    pub style: u8,
+    #[serde(default)]
+    pub elevation: f64,
+    /// Gradient fill: name + second colour.
+    #[serde(default)]
+    pub gradient: Option<Gradient>,
+    #[serde(default)]
+    pub origin: Vec2,
+    #[serde(default)]
+    pub background: Option<Color>,
+    /// The pattern's line families as a file defined them, for a pattern that isn't in the
+    /// standard library (unit scale and angle, like the library's; empty otherwise).
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub pattern_lines: Vec<crate::library::PatternLine>,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Gradient {
+    pub name: String,
+    pub color1: Color,
+    pub color2: Color,
+    #[serde(default)]
+    pub angle: f64,
+    #[serde(default)]
+    pub centered: bool,
+}
+/// SOLID / TRACE: up to four corners (DXF order 1,2,4,3 when drawn).
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Solid {
+    pub corners: [Vec3; 4],
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Face3d {
+    pub corners: [Vec3; 4],
+    #[serde(default)]
+    pub hidden_edges: u8,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct RayLine {
+    pub base: Vec3,
+    pub dir: Vec3,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Viewport {
+    pub center: Vec3,
+    pub width: f64,
+    pub height: f64,
+    pub view_center: Vec2,
+    pub view_height: f64,
+    #[serde(default)]
+    pub id: u32,
+    #[serde(default)]
+    pub locked: bool,
+    #[serde(default)]
+    pub frozen_layers: Vec<String>,
+    /// Per-viewport layer colour overrides (VP Color in the Layer Properties Manager).
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub layer_colors: Vec<(String, Color)>,
+    /// The paper-space entity whose outline clips the viewport (a closed polyline, circle,
+    /// ellipse or spline; DXF group 340). `None`: the rectangle `center`/`width`/`height`.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub clip: Option<Handle>,
+    /// Display on (MVIEW ON/OFF). An off viewport shows its border but no model space.
+    #[serde(default = "yes")]
+    pub on: bool,
+}
+impl Default for Viewport {
+    fn default() -> Self {
+        Viewport {
+            center: Vec3::ZERO,
+            width: 1.0,
+            height: 1.0,
+            view_center: Vec2::ZERO,
+            view_height: 1.0,
+            id: 0,
+            locked: false,
+            frozen_layers: Vec::new(),
+            layer_colors: Vec::new(),
+            clip: None,
+            on: true,
+        }
+    }
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Image {
+    pub insert: Vec3,
+    /// One pixel's width (U) and height (V) vectors in drawing units.
+    pub u: Vec3,
+    pub v: Vec3,
+    /// Image size in pixels.
+    pub size: Vec2,
+    /// The image file (its IMAGEDEF object's path).
+    pub path: String,
+    /// The image definition's name (its key in the drawing's image dictionary).
+    #[serde(default, skip_serializing_if = "String::is_empty")]
+    pub name: String,
+    /// Clip boundary in pixel coordinates (origin at the top-left corner of the image, y down):
+    /// two opposite corners of a rectangle, or a polygon's vertices. Empty: the whole image.
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub clip: Vec<Vec2>,
+    /// The clip boundary is applied.
+    #[serde(default)]
+    pub clipping: bool,
+    /// Display flags: 1 show the image, 2 show it when not aligned with the screen, 4 use the
+    /// clip boundary, 8 transparency on.
+    #[serde(default = "image_display")]
+    pub display: u16,
+    /// Brightness, contrast and fade, 0..=100.
+    #[serde(default = "image_fifty")]
+    pub brightness: u8,
+    #[serde(default = "image_fifty")]
+    pub contrast: u8,
+    #[serde(default)]
+    pub fade: u8,
+    /// The definition's default size of one pixel and its resolution unit (0 none, 2 cm, 5 inch).
+    #[serde(default = "image_pixel")]
+    pub pixel_size: Vec2,
+    #[serde(default)]
+    pub resolution_units: u8,
+}
+fn image_display() -> u16 {
+    7
+}
+fn image_fifty() -> u8 {
+    50
+}
+fn image_pixel() -> Vec2 {
+    Vec2::new(1.0, 1.0)
+}
+impl Default for Image {
+    fn default() -> Self {
+        Image {
+            insert: Vec3::ZERO,
+            u: Vec3::new(1.0, 0.0, 0.0),
+            v: Vec3::new(0.0, 1.0, 0.0),
+            size: Vec2::new(1.0, 1.0),
+            path: String::new(),
+            name: String::new(),
+            clip: Vec::new(),
+            clipping: false,
+            display: image_display(),
+            brightness: image_fifty(),
+            contrast: image_fifty(),
+            fade: 0,
+            pixel_size: image_pixel(),
+            resolution_units: 0,
+        }
+    }
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct Wipeout {
+    pub boundary: Vec<Vec2>,
+}
+#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct TableCell {
+    pub text: String,
+    #[serde(default)]
+    pub merged: Option<(u32, u32)>,
+    /// The cell's own cell style; empty: its row's.
+    #[serde(default, skip_serializing_if = "String::is_empty")]
+    pub style: String,
+    /// A formula (`=Sum(A1:B3)`); `text` holds its value.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub formula: Option<String>,
+    /// The cell's own text height (DXF 140 in the cell record), before the table's scale;
+    /// `None`: its cell style's.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub text_height: Option<f64>,
+}
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+#[serde(rename_all = "camelCase")]
+pub struct Table {
+    pub insert: Vec3,
+    pub col_widths: Vec<f64>,
+    pub row_heights: Vec<f64>,
+    pub cells: Vec<Vec<TableCell>>,
+    #[serde(default = "standard")]
+    pub style: String,
+    #[serde(default = "default_text_h")]
+    pub text_height: f64,
+    /// First row is a title (merged across, larger text).
+    #[serde(default)]
+    pub title: bool,
+    /// The row after the title holds column headers.
+    #[serde(default)]
+    pub header: bool,
+    /// The cell style of each row; missing or empty: by position (Title, Header, Data).
+    #[serde(default, skip_serializing_if = "Vec::is_empty")]
+    pub row_styles: Vec<String>,
+    /// Table breaking (TABLEBREAK): the table drawn in several parts.
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub breaks: Option<crate::TableBreak>,
+    /// The CSV file the cells come from (DATALINK).
+    #[serde(default, skip_serializing_if = "Option::is_none")]
+    pub data_link: Option<crate::DataLink>,
+}
+fn default_text_h() -> f64 {
+    0.18
+}
 mod region;
 pub use region::*;

-mod block;
-mod common;
-mod curves;
-mod dim;
-mod fill;
-mod layout;
-mod text;
-
-pub use block::{Attrib, AttribModes, AttribProps, Insert, MultilineAttrib, mtext_literal};
-pub use common::{Common, Handle, Lineweight, RawTag, Transparency};
-pub use curves::{Arc, Circle, Ellipse, Face3d, Line, LwPolyline, Point, Polyline3d, RayLine, Solid};
-pub use dim::{AssocSnap, DimAssoc, DimBreak, DimKind, DimMarks, Dimension, Inspection, JoggedRadius, Leader, MLeader};
-pub use fill::{Gradient, Hatch, HatchLoop, Wipeout};
-pub use layout::{Image, Table, TableCell, Viewport};
-pub use text::{HAlign, MText, MTextColumnType, MTextColumns, Text, VAlign};
+/// A raw DXF group: kept for round-tripping entities we do not model.
+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
+pub struct RawTag {
+    pub code: i32,
+    pub value: String,
+}
 #[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
 pub struct Unknown {
    pub dxf_type: String,
@@ -1,182 +0,0 @@
-use super::common::{Common, Lineweight};
-use super::text::{MText, Text};
-use super::{Color, Deserialize, EntityKind, Mat3, Serialize, Vec2, Vec3};
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Attrib {
-    pub tag: String,
-    pub text: Text,
-    #[serde(default)]
-    pub invisible: bool,
-    #[serde(default)]
-    pub constant: bool,
-    #[serde(default)]
-    pub prompt: String,
-    /// An attribute's own properties; each one left unset follows the attribute definition.
-    #[serde(default, skip_serializing_if = "AttribProps::is_empty")]
-    pub props: AttribProps,
-    /// A multiline attribute (DXF attribute type 2, or 4 for a definition): its text as
-    /// multiline text. `text.value` holds the plain text, which value edits change.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub multiline: Option<MultilineAttrib>,
-    /// Its other modes: Verify, Preset and Lock position.
-    #[serde(default, skip_serializing_if = "AttribModes::is_default")]
-    pub modes: AttribModes,
-}
-
-/// An attribute's modes beyond invisible and constant.
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct AttribModes {
-    /// Verify: the value is asked for twice when the block is inserted (DXF flag 4).
-    #[serde(default)]
-    pub verify: bool,
-    /// Preset: the default value is used without asking (DXF flag 8).
-    #[serde(default)]
-    pub preset: bool,
-    /// Lock position: the attribute can't be moved on its own within a reference (DXF group
-    /// 280 after the flags). A reference's attributes take it from their definitions.
-    #[serde(default)]
-    pub lock_position: bool,
-}
-
-impl AttribModes {
-    pub fn is_default(&self) -> bool {
-        *self == Self::default()
-    }
-    /// The modes of a reference's attribute made from a definition with these: AutoCAD keeps
-    /// only Lock position there.
-    pub fn for_reference(self) -> Self {
-        AttribModes { lock_position: self.lock_position, ..Self::default() }
-    }
-}
-
-/// The multiline text of a multiline attribute.
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct MultilineAttrib {
-    pub mtext: MText,
-    /// The plain text `mtext`'s contents read as: an attribute whose value differs was edited
-    /// since, and its value replaces the contents.
-    pub read_as: String,
-}
-
-impl MultilineAttrib {
-    /// This text placed by `m` (a block reference's transform, for its attribute made from a
-    /// definition).
-    pub fn transformed(&self, m: &Mat3) -> MultilineAttrib {
-        let mut k = EntityKind::MText(self.mtext.clone());
-        k.transform(m);
-        let mtext = if let EntityKind::MText(t) = k { t } else { self.mtext.clone() };
-        MultilineAttrib { mtext, read_as: self.read_as.clone() }
-    }
-}
-
-impl Attrib {
-    /// Move a multiline attribute's text by `m` along with the attribute (nothing for others).
-    pub fn transform_multiline(&mut self, m: &Mat3) {
-        if let Some(ml) = &mut self.multiline {
-            *ml = ml.transformed(m);
-        }
-    }
-
-    /// A multiline attribute's text as drawn and saved: its multiline text, with the contents
-    /// replaced by the value when the value was edited since it was read.
-    pub fn multiline_text(&self) -> Option<MText> {
-        let m = self.multiline.as_ref()?;
-        let mut t = m.mtext.clone();
-        if self.text.value != m.read_as {
-            t.contents = mtext_literal(&self.text.value);
-        }
-        Some(t)
-    }
-}
-
-/// `s` as MTEXT contents that read back as `s`: backslashes and braces escaped, line breaks as
-/// paragraph breaks.
-pub fn mtext_literal(s: &str) -> String {
-    let mut out = String::with_capacity(s.len());
-    for c in s.chars() {
-        match c {
-            '\\' => out.push_str("\\\\"),
-            '{' => out.push_str("\\{"),
-            '}' => out.push_str("\\}"),
-            '\n' => out.push_str("\\P"),
-            '\r' => {}
-            c => out.push(c),
-        }
-    }
-    out
-}
-
-/// Properties set on one attribute of a block reference (an ATTRIB's layer, colour, linetype and
-/// lineweight), overriding those of its definition.
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct AttribProps {
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub layer: Option<String>,
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub color: Option<Color>,
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub linetype: Option<String>,
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub lineweight: Option<Lineweight>,
-}
-
-impl AttribProps {
-    /// Nothing set: the attribute is drawn with its definition's properties.
-    pub fn is_empty(&self) -> bool {
-        *self == AttribProps::default()
-    }
-    /// `base` (the definition's properties) with the ones set here in place.
-    pub fn over(&self, base: &Common) -> Common {
-        Common {
-            layer: self.layer.clone().unwrap_or_else(|| base.layer.clone()),
-            color: self.color.unwrap_or(base.color),
-            linetype: self.linetype.clone().unwrap_or_else(|| base.linetype.clone()),
-            lineweight: self.lineweight.unwrap_or(base.lineweight),
-            ..base.clone()
-        }
-    }
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Insert {
-    pub block: String,
-    pub insert: Vec3,
-    #[serde(default = "unit_scale")]
-    pub scale: Vec3,
-    #[serde(default)]
-    pub rotation: f64,
-    #[serde(default)]
-    pub attribs: Vec<Attrib>,
-    #[serde(default = "one_u")]
-    pub cols: u32,
-    #[serde(default = "one_u")]
-    pub rows: u32,
-    #[serde(default)]
-    pub col_spacing: f64,
-    #[serde(default)]
-    pub row_spacing: f64,
-}
-
-fn unit_scale() -> Vec3 {
-    Vec3::new(1.0, 1.0, 1.0)
-}
-
-fn one_u() -> u32 {
-    1
-}
-
-impl Insert {
-    /// Block-to-world transform (2D part).
-    pub fn transform(&self, base: Vec2) -> Mat3 {
-        Mat3::translate(self.insert.xy())
-            .then_before(Mat3::rotate(self.rotation))
-            .then_before(Mat3::scale(self.scale.x, self.scale.y))
-            .then_before(Mat3::translate(-base))
-    }
-}
@@ -1,132 +0,0 @@
-use super::{Color, Deserialize, Serialize, Vec3};
-
-/// A database handle (DXF group 5), unique per drawing.
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, PartialOrd, Ord, Serialize, Deserialize)]
-pub struct Handle(pub u64);
-
-impl Handle {
-    pub fn hex(self) -> String {
-        format!("{:X}", self.0)
-    }
-    pub fn parse_hex(s: &str) -> Option<Handle> {
-        let s = s.trim();
-        if !s.bytes().all(|b| b.is_ascii_hexdigit()) {
-            return None;
-        }
-        u64::from_str_radix(s, 16).ok().map(Handle)
-    }
-}
-
-/// Lineweight in hundredths of a millimetre, or a logical value.
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum Lineweight {
-    #[default]
-    ByLayer,
-    ByBlock,
-    Default,
-    /// 0..=211 (hundredths of mm).
-    Mm100(u16),
-}
-
-impl Lineweight {
-    /// The standard lineweight values (mm × 100).
-    pub const STANDARD: [u16; 24] = [0, 5, 9, 13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90, 100, 106, 120, 140, 158, 200, 211];
-    pub fn to_dxf(self) -> i16 {
-        match self {
-            Lineweight::ByLayer => -1,
-            Lineweight::ByBlock => -2,
-            Lineweight::Default => -3,
-            Lineweight::Mm100(v) => v.min(211) as i16,
-        }
-    }
-    pub fn from_dxf(v: i16) -> Lineweight {
-        match v {
-            -2 => Lineweight::ByBlock,
-            -3 => Lineweight::Default,
-            0..=211 => Lineweight::Mm100(v as u16),
-            _ => Lineweight::ByLayer,
-        }
-    }
-    pub fn name(self) -> String {
-        match self {
-            Lineweight::ByLayer => "ByLayer".into(),
-            Lineweight::ByBlock => "ByBlock".into(),
-            Lineweight::Default => "Default".into(),
-            Lineweight::Mm100(v) => format!("{:.2} mm", f64::from(v) / 100.0),
-        }
-    }
-}
-
-/// Transparency: ByLayer, ByBlock, or 0..=90 percent.
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum Transparency {
-    #[default]
-    ByLayer,
-    ByBlock,
-    Percent(u8),
-}
-
-impl Transparency {
-    /// "ByLayer", "ByBlock" or the percentage ("50").
-    pub fn name(&self) -> String {
-        match self {
-            Transparency::ByLayer => "ByLayer".into(),
-            Transparency::ByBlock => "ByBlock".into(),
-            Transparency::Percent(p) => p.to_string(),
-        }
-    }
-}
-
-/// Properties every entity has.
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct Common {
-    pub layer: String,
-    pub color: Color,
-    pub linetype: String,
-    pub lineweight: Lineweight,
-    pub ltscale: f64,
-    pub transparency: Transparency,
-    pub visible: bool,
-    pub thickness: f64,
-    pub extrusion: Vec3,
-    /// Named plot style: `ByLayer`, `ByBlock` or a style of the layout's named (`.stb`) plot
-    /// style table.
-    pub plot_style: String,
-    /// The annotation scales an annotative object supports (empty: not annotative).
-    #[serde(skip_serializing_if = "Vec::is_empty")]
-    pub anno_scales: Vec<crate::AnnoScale>,
-    /// Other applications' extended data (xdata) as read from the drawing file: whole
-    /// applications, each from its `1001` group on. It is part of the object, so a copy of the
-    /// object (COPY, MIRROR, ARRAY, paste) carries it, as in AutoCAD.
-    #[serde(skip_serializing_if = "Vec::is_empty")]
-    pub xdata: Vec<RawTag>,
-}
-
-impl Default for Common {
-    fn default() -> Self {
-        Common {
-            layer: "0".into(),
-            color: Color::ByLayer,
-            linetype: "ByLayer".into(),
-            lineweight: Lineweight::ByLayer,
-            ltscale: 1.0,
-            transparency: Transparency::ByLayer,
-            visible: true,
-            thickness: 0.0,
-            extrusion: Vec3::Z,
-            plot_style: "ByLayer".into(),
-            anno_scales: Vec::new(),
-            xdata: Vec::new(),
-        }
-    }
-}
-
-/// A raw DXF group: kept for round-tripping entities we do not model.
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct RawTag {
-    pub code: i32,
-    pub value: String,
-}
@@ -1,76 +0,0 @@
-use super::{Deserialize, PolyVertex, Serialize, Vec3};
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Line {
-    pub a: Vec3,
-    pub b: Vec3,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Point {
-    pub p: Vec3,
-    #[serde(default)]
-    pub angle: f64,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Circle {
-    pub center: Vec3,
-    pub radius: f64,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Arc {
-    pub center: Vec3,
-    pub radius: f64,
-    /// Radians, CCW.
-    pub start: f64,
-    pub end: f64,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Ellipse {
-    pub center: Vec3,
-    pub major: Vec3,
-    pub ratio: f64,
-    pub start: f64,
-    pub end: f64,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct LwPolyline {
-    pub vertices: Vec<PolyVertex>,
-    pub closed: bool,
-    #[serde(default)]
-    pub const_width: f64,
-    #[serde(default)]
-    pub elevation: f64,
-    /// Polyline linetype generation (PLINEGEN).
-    #[serde(default)]
-    pub plinegen: bool,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Polyline3d {
-    pub points: Vec<Vec3>,
-    pub closed: bool,
-}
-
-/// SOLID / TRACE: up to four corners (DXF order 1,2,4,3 when drawn).
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Solid {
-    pub corners: [Vec3; 4],
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Face3d {
-    pub corners: [Vec3; 4],
-    #[serde(default)]
-    pub hidden_edges: u8,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct RayLine {
-    pub base: Vec3,
-    pub dir: Vec3,
-}
@@ -1,226 +0,0 @@
-use super::block::Insert;
-use super::common::Handle;
-use super::text::MText;
-use super::{Deserialize, GSpline, Serialize, Vec2, Vec3, one, standard, yes};
-
-#[derive(Clone, Copy, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum DimKind {
-    /// Rotated linear dimension (horizontal = 0, vertical = 90°).
-    Linear {
-        rotation: f64,
-    },
-    Aligned,
-    Angular,
-    Angular3P,
-    Diameter,
-    Radius,
-    Ordinate {
-        x_type: bool,
-    },
-    ArcLength,
-}
-
-/// A dimension. Definition points follow DXF: `defpt` (10: dimension line point),
-/// `p13`/`p14` (extension origins), `p15`/`p16` (arc/angle points), `text_mid` (11).
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Dimension {
-    pub kind: DimKind,
-    pub defpt: Vec3,
-    pub text_mid: Vec3,
-    #[serde(default)]
-    pub p13: Vec3,
-    #[serde(default)]
-    pub p14: Vec3,
-    #[serde(default)]
-    pub p15: Vec3,
-    #[serde(default)]
-    pub p16: Vec3,
-    /// "" = measured value, "<>" inside = measurement placeholder, " " = suppressed.
-    #[serde(default)]
-    pub text: String,
-    #[serde(default = "standard")]
-    pub style: String,
-    #[serde(default)]
-    pub measurement: f64,
-    #[serde(default)]
-    pub text_rotation: f64,
-    /// User moved the text (text_mid is authoritative).
-    #[serde(default)]
-    pub user_text_pos: bool,
-    /// Anonymous block with the rendered geometry (from files); regenerated when edited.
-    #[serde(default)]
-    pub block: Option<String>,
-    /// Per-dimension style overrides (DIMOVERRIDE): DimStyle field names (camelCase) → values,
-    /// merged over the named style.
-    #[serde(default, skip_serializing_if = "serde_json::Map::is_empty")]
-    pub overrides: serde_json::Map<String, serde_json::Value>,
-    /// Associativity: which definition points follow which objects.
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub assoc: Vec<DimAssoc>,
-    /// Oblique extension lines, jogs, breaks and inspection frames.
-    #[serde(default, skip_serializing_if = "DimMarks::is_empty")]
-    pub marks: DimMarks,
-}
-
-/// What dimension edits add to a dimension's drawing: DIMEDIT Oblique, DIMJOGLINE, DIMJOGGED,
-/// DIMBREAK and DIMINSPECT.
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct DimMarks {
-    /// Angle (radians) of the extension lines of a linear or aligned dimension; None =
-    /// perpendicular to the dimension line.
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub oblique: Option<f64>,
-    /// A jog on the dimension line of a linear or aligned dimension, at this point (DIMJOGLINE).
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub jog_line: Option<Vec3>,
-    /// A jogged radius dimension (DIMJOGGED).
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub jogged: Option<JoggedRadius>,
-    /// Gaps in the dimension and extension lines (DIMBREAK).
-    #[serde(skip_serializing_if = "Vec::is_empty")]
-    pub breaks: Vec<DimBreak>,
-    /// Inspection frame, label and rate (DIMINSPECT).
-    #[serde(skip_serializing_if = "Option::is_none")]
-    pub inspect: Option<Inspection>,
-}
-
-impl DimMarks {
-    pub fn is_empty(&self) -> bool {
-        *self == DimMarks::default()
-    }
-
-    /// Transform the points and angles (part of [`super::EntityKind::transform`]).
-    pub(super) fn transform(&mut self, t3: &dyn Fn(&mut Vec3), rot: f64, s: f64, mirror: bool) {
-        if let Some(a) = &mut self.oblique {
-            *a = cadcraft_geom::norm_angle(if mirror { rot - (*a - rot) } else { *a + rot });
-        }
-        if let Some(j) = &mut self.jog_line {
-            t3(j);
-        }
-        if let Some(j) = &mut self.jogged {
-            t3(&mut j.center);
-            t3(&mut j.jog);
-        }
-        for b in &mut self.breaks {
-            t3(&mut b.at);
-            b.size *= s;
-        }
-    }
-}
-
-/// The definition of a jogged radius dimension: the dimension line starts at an overriding
-/// centre and jogs on its way to the arc.
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct JoggedRadius {
-    /// Where the dimension line starts instead of the true centre.
-    pub center: Vec3,
-    /// The middle of the jog.
-    pub jog: Vec3,
-}
-
-/// A gap in a dimension's lines: everything within `size / 2` of `at` is left out.
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct DimBreak {
-    pub at: Vec3,
-    pub size: f64,
-    /// Made by DIMBREAK Auto (recomputed by the next Auto) rather than picked by hand.
-    pub auto: bool,
-}
-
-/// An inspection dimension (DIMINSPECT).
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct Inspection {
-    /// Frame shape: 0 round ends, 1 angular ends, 2 none.
-    pub shape: u8,
-    /// Text left of the value ("" = none).
-    pub label: String,
-    /// Inspection rate right of the value ("" = none).
-    pub rate: String,
-}
-
-/// A dimension definition point that follows an object (associative dimensions).
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct DimAssoc {
-    /// Definition point: "defpt", "p13", "p14", "p15" or "p16".
-    pub point: String,
-    /// The object it is attached to.
-    pub handle: Handle,
-    pub snap: AssocSnap,
-}
-
-/// Where on the object an associative definition point sits.
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum AssocSnap {
-    /// Start point of a line/arc (or polyline vertex 0).
-    Start,
-    /// End point of a line/arc.
-    End,
-    Mid,
-    /// Centre of a circle/arc.
-    Center,
-    /// On a circle/arc at a fixed angle (radians) from its centre.
-    OnCircle {
-        angle: f64,
-    },
-    /// Intersection of this (line) object with another line.
-    Intersection {
-        other: Handle,
-    },
-    /// Vertex `index` of a polyline.
-    Vertex {
-        index: usize,
-    },
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Leader {
-    pub vertices: Vec<Vec3>,
-    #[serde(default = "yes")]
-    pub arrow: bool,
-    #[serde(default)]
-    pub spline: bool,
-    #[serde(default = "standard")]
-    pub style: String,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct MLeader {
-    pub leaders: Vec<Vec<Vec3>>,
-    pub landing: Vec3,
-    pub dogleg: f64,
-    pub text: Option<MText>,
-    #[serde(default = "standard")]
-    pub style: String,
-    #[serde(default = "one")]
-    pub arrow_size: f64,
-    /// Leader lines are smooth curves through their points (leader type Spline). An empty
-    /// `leaders` is a multileader without a leader line (leader type None).
-    #[serde(default)]
-    pub spline: bool,
-    /// Block content in place of the text: a block reference placed at the landing.
-    #[serde(default)]
-    pub block: Option<Insert>,
-}
-
-impl MLeader {
-    /// Each leader line as drawn: through its points to the landing, smoothed for spline leaders.
-    pub fn leader_paths(&self) -> Vec<Vec<Vec2>> {
-        self.leaders
-            .iter()
-            .map(|l| {
-                let pts: Vec<Vec2> = l.iter().map(|v| v.xy()).chain(std::iter::once(self.landing.xy())).collect();
-                if self.spline && pts.len() > 2 { GSpline::from_fit_points(&pts).tessellate(1e-3) } else { pts }
-            })
-            .collect()
-    }
-}
@@ -1,61 +0,0 @@
-use super::common::Handle;
-use super::{Color, Deserialize, PolyVertex, Serialize, Vec2, one};
-
-/// A hatch boundary loop: closed polyline with bulges.
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct HatchLoop {
-    pub vertices: Vec<PolyVertex>,
-    #[serde(default)]
-    pub outer: bool,
-    /// The objects the loop was made from (DXF group 97 count, 330 handles): an associative
-    /// hatch re-fills the loop from them when they change.
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub sources: Vec<Handle>,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Hatch {
-    pub pattern: String,
-    pub solid: bool,
-    pub loops: Vec<HatchLoop>,
-    #[serde(default = "one")]
-    pub scale: f64,
-    #[serde(default)]
-    pub angle: f64,
-    #[serde(default)]
-    pub associative: bool,
-    /// 0 normal (odd parity), 1 outer, 2 ignore.
-    #[serde(default)]
-    pub style: u8,
-    #[serde(default)]
-    pub elevation: f64,
-    /// Gradient fill: name + second colour.
-    #[serde(default)]
-    pub gradient: Option<Gradient>,
-    #[serde(default)]
-    pub origin: Vec2,
-    #[serde(default)]
-    pub background: Option<Color>,
-    /// The pattern's line families as a file defined them, for a pattern that isn't in the
-    /// standard library (unit scale and angle, like the library's; empty otherwise).
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub pattern_lines: Vec<crate::library::PatternLine>,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Gradient {
-    pub name: String,
-    pub color1: Color,
-    pub color2: Color,
-    #[serde(default)]
-    pub angle: f64,
-    #[serde(default)]
-    pub centered: bool,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-pub struct Wipeout {
-    pub boundary: Vec<Vec2>,
-}
@@ -1,168 +0,0 @@
-use super::common::Handle;
-use super::{Color, Deserialize, Serialize, Vec2, Vec3, standard, yes};
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Viewport {
-    pub center: Vec3,
-    pub width: f64,
-    pub height: f64,
-    pub view_center: Vec2,
-    pub view_height: f64,
-    #[serde(default)]
-    pub id: u32,
-    #[serde(default)]
-    pub locked: bool,
-    #[serde(default)]
-    pub frozen_layers: Vec<String>,
-    /// Per-viewport layer colour overrides (VP Color in the Layer Properties Manager).
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub layer_colors: Vec<(String, Color)>,
-    /// The paper-space entity whose outline clips the viewport (a closed polyline, circle,
-    /// ellipse or spline; DXF group 340). `None`: the rectangle `center`/`width`/`height`.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub clip: Option<Handle>,
-    /// Display on (MVIEW ON/OFF). An off viewport shows its border but no model space.
-    #[serde(default = "yes")]
-    pub on: bool,
-}
-
-impl Default for Viewport {
-    fn default() -> Self {
-        Viewport {
-            center: Vec3::ZERO,
-            width: 1.0,
-            height: 1.0,
-            view_center: Vec2::ZERO,
-            view_height: 1.0,
-            id: 0,
-            locked: false,
-            frozen_layers: Vec::new(),
-            layer_colors: Vec::new(),
-            clip: None,
-            on: true,
-        }
-    }
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Image {
-    pub insert: Vec3,
-    /// One pixel's width (U) and height (V) vectors in drawing units.
-    pub u: Vec3,
-    pub v: Vec3,
-    /// Image size in pixels.
-    pub size: Vec2,
-    /// The image file (its IMAGEDEF object's path).
-    pub path: String,
-    /// The image definition's name (its key in the drawing's image dictionary).
-    #[serde(default, skip_serializing_if = "String::is_empty")]
-    pub name: String,
-    /// Clip boundary in pixel coordinates (origin at the top-left corner of the image, y down):
-    /// two opposite corners of a rectangle, or a polygon's vertices. Empty: the whole image.
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub clip: Vec<Vec2>,
-    /// The clip boundary is applied.
-    #[serde(default)]
-    pub clipping: bool,
-    /// Display flags: 1 show the image, 2 show it when not aligned with the screen, 4 use the
-    /// clip boundary, 8 transparency on.
-    #[serde(default = "image_display")]
-    pub display: u16,
-    /// Brightness, contrast and fade, 0..=100.
-    #[serde(default = "image_fifty")]
-    pub brightness: u8,
-    #[serde(default = "image_fifty")]
-    pub contrast: u8,
-    #[serde(default)]
-    pub fade: u8,
-    /// The definition's default size of one pixel and its resolution unit (0 none, 2 cm, 5 inch).
-    #[serde(default = "image_pixel")]
-    pub pixel_size: Vec2,
-    #[serde(default)]
-    pub resolution_units: u8,
-}
-
-fn image_display() -> u16 {
-    7
-}
-
-fn image_fifty() -> u8 {
-    50
-}
-
-fn image_pixel() -> Vec2 {
-    Vec2::new(1.0, 1.0)
-}
-
-impl Default for Image {
-    fn default() -> Self {
-        Image {
-            insert: Vec3::ZERO,
-            u: Vec3::new(1.0, 0.0, 0.0),
-            v: Vec3::new(0.0, 1.0, 0.0),
-            size: Vec2::new(1.0, 1.0),
-            path: String::new(),
-            name: String::new(),
-            clip: Vec::new(),
-            clipping: false,
-            display: image_display(),
-            brightness: image_fifty(),
-            contrast: image_fifty(),
-            fade: 0,
-            pixel_size: image_pixel(),
-            resolution_units: 0,
-        }
-    }
-}
-
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct TableCell {
-    pub text: String,
-    #[serde(default)]
-    pub merged: Option<(u32, u32)>,
-    /// The cell's own cell style; empty: its row's.
-    #[serde(default, skip_serializing_if = "String::is_empty")]
-    pub style: String,
-    /// A formula (`=Sum(A1:B3)`); `text` holds its value.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub formula: Option<String>,
-    /// The cell's own text height (DXF 140 in the cell record), before the table's scale;
-    /// `None`: its cell style's.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub text_height: Option<f64>,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Table {
-    pub insert: Vec3,
-    pub col_widths: Vec<f64>,
-    pub row_heights: Vec<f64>,
-    pub cells: Vec<Vec<TableCell>>,
-    #[serde(default = "standard")]
-    pub style: String,
-    #[serde(default = "default_text_h")]
-    pub text_height: f64,
-    /// First row is a title (merged across, larger text).
-    #[serde(default)]
-    pub title: bool,
-    /// The row after the title holds column headers.
-    #[serde(default)]
-    pub header: bool,
-    /// The cell style of each row; missing or empty: by position (Title, Header, Data).
-    #[serde(default, skip_serializing_if = "Vec::is_empty")]
-    pub row_styles: Vec<String>,
-    /// Table breaking (TABLEBREAK): the table drawn in several parts.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub breaks: Option<crate::TableBreak>,
-    /// The CSV file the cells come from (DATALINK).
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub data_link: Option<crate::DataLink>,
-}
-
-fn default_text_h() -> f64 {
-    0.18
-}
@@ -1,141 +0,0 @@
-use super::{Deserialize, Serialize, Vec2, Vec3, one, standard};
-
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum HAlign {
-    #[default]
-    Left,
-    Center,
-    Right,
-    Aligned,
-    Middle,
-    Fit,
-}
-
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum VAlign {
-    #[default]
-    Baseline,
-    Bottom,
-    Middle,
-    Top,
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct Text {
-    pub insert: Vec3,
-    #[serde(default)]
-    pub align_pt: Option<Vec3>,
-    pub height: f64,
-    pub value: String,
-    #[serde(default)]
-    pub rotation: f64,
-    #[serde(default = "one")]
-    pub width_factor: f64,
-    #[serde(default)]
-    pub oblique: f64,
-    #[serde(default = "standard")]
-    pub style: String,
-    #[serde(default)]
-    pub halign: HAlign,
-    #[serde(default)]
-    pub valign: VAlign,
-}
-
-impl Text {
-    /// The point the text is placed by, as the Insertion snap and the grip show it: the alignment
-    /// point (DXF group 11) of justified text, the start point (group 10) of left-baseline,
-    /// aligned and fit text.
-    pub fn justify_point(&self) -> Vec2 {
-        match (self.halign, self.valign) {
-            (HAlign::Left, VAlign::Baseline) | (HAlign::Aligned | HAlign::Fit, _) => self.insert.xy(),
-            _ => self.align_pt.unwrap_or(self.insert).xy(),
-        }
-    }
-}
-
-#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub struct MText {
-    pub insert: Vec3,
-    pub height: f64,
-    /// Reference rectangle width (0 = no wrapping).
-    #[serde(default)]
-    pub width: f64,
-    /// 1..=9: TL TC TR ML MC MR BL BC BR.
-    #[serde(default = "attach_tl")]
-    pub attach: u8,
-    #[serde(default)]
-    pub rotation: f64,
-    #[serde(default = "standard")]
-    pub style: String,
-    /// Raw MTEXT contents with inline codes (\P, {\fArial|b1;...}, \S1/2; …).
-    pub contents: String,
-    #[serde(default = "one")]
-    pub line_spacing: f64,
-    /// Line spacing style (DXF 73): Exactly (`true`) keeps `line_spacing` whatever the character
-    /// heights; At least (`false`, the default) lets taller characters push lines apart.
-    #[serde(default)]
-    pub line_spacing_exact: bool,
-    /// Columns the text flows through, each `width` wide (DXF 75/76/78/79/48/49/50); `None`:
-    /// one column.
-    #[serde(default, skip_serializing_if = "Option::is_none")]
-    pub columns: Option<MTextColumns>,
-}
-
-fn attach_tl() -> u8 {
-    1
-}
-
-/// Static columns: a fixed number of columns of one height. Dynamic columns: as many columns
-/// as the text needs, of one height (auto height) or each its own (manual heights).
-#[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
-#[serde(rename_all = "camelCase")]
-pub enum MTextColumnType {
-    #[default]
-    Static,
-    Dynamic,
-}
-
-/// MTEXT columns (MTEXT Columns option, DXF Reference MTEXT groups 75–79, 48–50).
-#[derive(Clone, Debug, Default, PartialEq, Serialize, Deserialize)]
-#[serde(default, rename_all = "camelCase")]
-pub struct MTextColumns {
-    #[serde(rename = "type")]
-    pub kind: MTextColumnType,
-    /// Number of columns (static columns: the columns there are).
-    pub count: u16,
-    /// Space between two columns.
-    pub gutter: f64,
-    /// Height of every column (static, and dynamic with auto height).
-    pub height: f64,
-    /// Dynamic columns: one height for all columns (`height`) instead of `heights`.
-    pub auto_height: bool,
-    /// Dynamic columns with manual heights: the height of each column.
-    #[serde(skip_serializing_if = "Vec::is_empty")]
-    pub heights: Vec<f64>,
-    /// Columns run right to left.
-    pub flow_reversed: bool,
-}
-
-impl MTextColumns {
-    /// The width of `count` columns of `column_width` and their gutters.
-    pub fn total_width(&self, column_width: f64) -> f64 {
-        let n = f64::from(self.count.max(1));
-        column_width * n + self.gutter.max(0.0) * (n - 1.0)
-    }
-
-    /// The tallest column.
-    pub fn max_height(&self) -> f64 {
-        self.heights.iter().copied().fold(self.height, f64::max).max(0.0)
-    }
-
-    /// Scale every length (SCALE, block insertion).
-    pub fn scale(&mut self, s: f64) {
-        self.gutter *= s;
-        self.height *= s;
-        self.heights.iter_mut().for_each(|h| *h *= s);
-    }
-}
@@ -1,100 +0,0 @@
-use std::path::Path;
-
-/// A file format, chosen by the file name's extension (ASCII case-insensitive).
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum Format {
-    Dxf,
-    Dwg,
-    /// A drawing template: DWG content.
-    Dwt,
-    Svg,
-    /// Gzip-compressed SVG.
-    Svgz,
-    Png,
-    Pdf,
-}
-
-impl Format {
-    /// The formats a drawing can be read from by name. DXF and DWG are also recognised by content.
-    pub const READ: &'static [Format] = &[Format::Dxf, Format::Dwg, Format::Svg, Format::Svgz];
-    /// The formats a drawing can be written to.
-    pub const WRITE: &'static [Format] = &[Format::Dxf, Format::Dwg, Format::Dwt, Format::Svg, Format::Png, Format::Pdf];
-
-    /// The format `path`'s extension names. A name without an extension is DXF; an unknown
-    /// extension is `None`.
-    pub fn from_path(p: impl AsRef<Path>) -> Option<Format> {
-        let ext = p.as_ref().extension().map(|e| e.to_string_lossy().to_ascii_lowercase()).unwrap_or_default();
-        Some(match ext.as_str() {
-            "dxf" | "" => Format::Dxf,
-            "dwg" => Format::Dwg,
-            "dwt" => Format::Dwt,
-            "svg" => Format::Svg,
-            "svgz" => Format::Svgz,
-            "png" => Format::Png,
-            "pdf" => Format::Pdf,
-            _ => return None,
-        })
-    }
-
-    /// The extension, lower case and without the dot.
-    pub fn extension(self) -> &'static str {
-        match self {
-            Format::Dxf => "dxf",
-            Format::Dwg => "dwg",
-            Format::Dwt => "dwt",
-            Format::Svg => "svg",
-            Format::Svgz => "svgz",
-            Format::Png => "png",
-            Format::Pdf => "pdf",
-        }
-    }
-
-    /// Written as an image (model space fitted to a frame), so framing applies. SVGZ is read only.
-    pub fn is_image(self) -> bool {
-        matches!(self, Format::Svg | Format::Png | Format::Pdf)
-    }
-
-    /// A drawing file (DXF, DWG, template) rather than an image.
-    pub fn is_drawing(self) -> bool {
-        matches!(self, Format::Dxf | Format::Dwg | Format::Dwt)
-    }
-
-    /// Written as DWG, which drops the object types the DWG writer doesn't know.
-    pub fn drops_unknown(self) -> bool {
-        matches!(self, Format::Dwg | Format::Dwt)
-    }
-
-    /// `formats` as "dxf, dwg, svg": the list help text shows.
-    pub fn list(formats: &[Format]) -> String {
-        formats.iter().map(|f| f.extension()).collect::<Vec<_>>().join(", ")
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn from_path_by_extension() {
-        for f in [Format::Dxf, Format::Dwg, Format::Dwt, Format::Svg, Format::Svgz, Format::Png, Format::Pdf] {
-            assert_eq!(Format::from_path(format!("a/b.{}", f.extension())), Some(f));
-            assert_eq!(Format::from_path(format!("B.{}", f.extension().to_ascii_uppercase())), Some(f));
-        }
-        assert_eq!(Format::from_path("Drawing1"), Some(Format::Dxf), "no extension is DXF");
-        assert_eq!(Format::from_path("dir.dwg/Drawing1"), Some(Format::Dxf));
-        assert_eq!(Format::from_path("a."), Some(Format::Dxf));
-        assert_eq!(Format::from_path("a.txt"), None);
-        assert_eq!(Format::from_path("a.dxf.bak"), None);
-        assert_eq!(Format::from_path(std::path::Path::new("x.PnG")), Some(Format::Png));
-    }
-
-    #[test]
-    fn classes() {
-        assert!(Format::READ.contains(&Format::Svgz) && !Format::WRITE.contains(&Format::Svgz));
-        assert!(Format::WRITE.contains(&Format::Dwt) && !Format::READ.contains(&Format::Dwt));
-        assert!(Format::WRITE.iter().filter(|f| f.is_image()).count() == 3 && !Format::Svgz.is_image());
-        assert!(Format::Dwt.drops_unknown() && Format::Dwg.drops_unknown() && !Format::Dxf.drops_unknown());
-        assert!(Format::Dwt.is_drawing() && !Format::Pdf.is_drawing());
-        assert_eq!(Format::list(Format::READ), "dxf, dwg, svg, svgz");
-    }
-}
@@ -10,7 +10,6 @@ mod array;
 mod constraint;
 mod entity;
 mod extents;
-mod format;
 mod gdt;
 mod header;
 pub mod library;
@@ -28,7 +27,6 @@ pub use cadcraft_geom as geom;
 pub use constraint::*;
 pub use entity::*;
 pub use extents::{MAX_BLOCK_DEPTH, entity_bounds};
-pub use format::Format;
 pub use gdt::*;
 pub use header::{HVal, Header};
 pub use plotstyle::*;
@@ -256,10 +256,7 @@ mod native {
    use std::path::Path;
    use std::time::{Duration, SystemTime};

-    use super::{
-        Autosaver, Drawing, HEARTBEAT_SECS, HashMap, Job, Recoverable, STALE_LOCK_SECS, Session, is_instance_id, parse_file_name, parse_lock_name,
-        savefilepath, savetime,
-    };
+    use super::*;

    /// A new instance id: the process id and the start time.
    pub fn instance_id() -> String {
@@ -144,11 +144,6 @@ impl BlockEdit {
        }
        let host = &self.host.doc;
        let mut d = editor.clone();
-        // When the block is saved under another name, the edited block keeps the drawing's
-        // description and block `name` gets the description changed in the editor.
-        if !name.eq_ignore_ascii_case(&self.name) {
-            keep_description(&mut d, host, &self.name);
-        }
        d.model = host.model.clone();
        d.layouts = host.layouts.clone();
        d.groups = host.groups.clone();
@@ -176,21 +171,6 @@ impl BlockEdit {
    }
 }

-/// Give block `name` of `d` the description `host` has for it, or, when `host` has no such block,
-/// drop the empty definition a description gives a block the editor started and never saved.
-fn keep_description(d: &mut Drawing, host: &Drawing, name: &str) {
-    match host.block(name) {
-        Some(h) => {
-            if let Some((_, b)) = d.blocks.iter_mut().find(|(k, _)| k.eq_ignore_ascii_case(name))
-                && b.description != h.description
-            {
-                Arc::make_mut(b).description = h.description.clone();
-            }
-        }
-        None => d.blocks.retain(|k, b| !(k.eq_ignore_ascii_case(name) && b.entities.is_empty())),
-    }
-}
-
 impl DocState {
    /// The drawing as a file saves it: outside the Block Editor's changes while it is open.
    pub fn drawing(&self) -> &Arc<Drawing> {
@@ -292,24 +272,6 @@ impl DocState {
        let d = be.compose(&self.doc, &name)?;
        let original = d.block(&name).map(|b| b.entities.clone()).unwrap_or_default();
        let name = d.block(&name).map(|b| b.name.clone()).unwrap_or(name);
-        // When BSAVEAS saves the block under another name, the editor's drawing and each undo and
-        // redo step get the block as saved and the edited block as the drawing has it, so a later
-        // save and the description shown start from them after an undo too.
-        if !name.eq_ignore_ascii_case(&be.name)
-            && let Some(b) = d.block(&name).cloned()
-        {
-            let was = be.name.clone();
-            let reconcile = |doc: &mut Arc<Drawing>| {
-                let editor = Arc::make_mut(doc);
-                keep_description(editor, &d, &was);
-                editor.blocks.retain(|k, _| !k.eq_ignore_ascii_case(&name));
-                editor.blocks.insert(name.clone(), b.clone());
-            };
-            reconcile(&mut self.doc);
-            for step in self.undo.iter_mut().chain(self.redo.iter_mut()) {
-                reconcile(&mut step.doc);
-            }
-        }
        let editor = self.doc.clone();
        let Some(be) = &mut self.block_edit else { return Ok(()) };
        let before = be.host.doc.clone();
@@ -1,333 +0,0 @@
-use super::common::{DimText, add_dim, assoc_enabled, dim, hex_param, pick_at, segment_at, with_assoc};
-use super::{
-    Accept, AssocSnap, DimAssoc, DimKind, EntityKind, Handle, Input, Interactive, Prompt, Result, Segment, Session, Step, Value, Vec2, bad, json,
-    point_req, targets, v3,
-};
-
-/// Two-line angular dimension (type 2) between two lines, attached to them.
-fn angular_from_lines(s: &Session, h1: Handle, h2: Handle, at: Vec2) -> Option<EntityKind> {
-    let d = s.doc().ok()?;
-    let line = |h: Handle| match &d.entity(h)?.kind {
-        EntityKind::Line(l) => Some((l.a.xy(), l.b.xy())),
-        _ => None,
-    };
-    let ((a1, a2), (b1, b2)) = (line(h1)?, line(h2)?);
-    let (v, _, _) = cadcraft_geom::line_line_infinite(a1, a2, b1, b2)?;
-    // Use the leg ends on the side of the picked arc location (the quadrant the user meant).
-    let pick = |p: Vec2, q: Vec2, snap_p: AssocSnap, snap_q: AssocSnap| {
-        let dir = if (p - v).len() > (q - v).len() { (p, snap_p) } else { (q, snap_q) };
-        let other = if dir.1 == AssocSnap::Start { (q, AssocSnap::End) } else { (p, AssocSnap::Start) };
-        let side = |x: Vec2| (x - v).normalized().dot((at - v).normalized());
-        if side(other.0) > side(dir.0) && other.0.dist(v) > 1e-9 { other } else { dir }
-    };
-    let (p1, s1) = pick(a1, a2, AssocSnap::Start, AssocSnap::End);
-    let (p2, s2) = pick(b1, b2, AssocSnap::Start, AssocSnap::End);
-    // A two-line angular dimension (type 2): line 1 is p13 -> p14, line 2 is defpt -> p15, p16 is on the arc.
-    // The picked leg end goes last in each pair, so the renderer measures between p14 and p15.
-    let (o1, t1) = if s1 == AssocSnap::Start { (a2, AssocSnap::End) } else { (a1, AssocSnap::Start) };
-    let (o2, t2) = if s2 == AssocSnap::Start { (b2, AssocSnap::End) } else { (b1, AssocSnap::Start) };
-    let mut k = dim(s, DimKind::Angular, o2, o1, p1, p2, "");
-    if let EntityKind::Dimension(d) = &mut k {
-        d.p16 = v3(at);
-    }
-    let mut assoc = Vec::new();
-    if assoc_enabled(s) {
-        assoc = vec![
-            DimAssoc { point: "p13".into(), handle: h1, snap: t1 },
-            DimAssoc { point: "p14".into(), handle: h1, snap: s1 },
-            DimAssoc { point: "defpt".into(), handle: h2, snap: t2 },
-            DimAssoc { point: "p15".into(), handle: h2, snap: s2 },
-        ];
-    }
-    Some(with_assoc(k, assoc))
-}
-
-pub(super) fn run_angular(s: &mut Session, p: &Value) -> Result<Value> {
-    if let Some(ls) = p.get("lines").and_then(Value::as_array) {
-        let hs: Vec<Handle> = ls.iter().filter_map(|v| v.as_str().and_then(Handle::parse_hex).or_else(|| v.as_u64().map(Handle))).collect();
-        let (Some(h1), Some(h2)) = (hs.first(), hs.get(1)) else { return Err(bad("dimangular", "`lines` needs two line handles")) };
-        let at = point_req("dimangular", p, "at")?;
-        let k = angular_from_lines(s, *h1, *h2, at).ok_or_else(|| bad("dimangular", "objects must be two non-parallel lines"))?;
-        return Ok(json!({ "handle": add_dim(s, k)?.hex() }));
-    }
-    if let Some(h) = hex_param(p, "arc") {
-        let at = point_req("dimangular", p, "at")?;
-        let a = match s.doc()?.entity(h).map(|e| e.kind.clone()) {
-            Some(EntityKind::Arc(a)) => a,
-            _ => return Err(bad("dimangular", "object is not an arc")),
-        };
-        let g = cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end);
-        let k = dim(s, DimKind::Angular3P, at, g.start_point(), g.end_point(), g.center, "");
-        return Ok(json!({ "handle": add_dim(s, k)?.hex() }));
-    }
-    let v = point_req("dimangular", p, "vertex")?;
-    let a = point_req("dimangular", p, "p1")?;
-    let b = point_req("dimangular", p, "p2")?;
-    let at = point_req("dimangular", p, "at")?;
-    if v.near(a, 1e-12) || v.near(b, 1e-12) {
-        return Err(bad("dimangular", "`p1` and `p2` must differ from `vertex`"));
-    }
-    let k = dim(s, DimKind::Angular3P, at, a, b, v, "");
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-pub(super) fn run_arclen(s: &mut Session, p: &Value) -> Result<Value> {
-    let h = targets(s, p)?.first().copied().ok_or_else(|| bad("dimarc", "`handle` of an arc is required"))?;
-    let at = point_req("dimarc", p, "at")?;
-    let a = match s.doc()?.entity(h).map(|e| e.kind.clone()) {
-        Some(EntityKind::Arc(a)) => a,
-        _ => return Err(bad("dimarc", "object is not an arc")),
-    };
-    let ga = cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end);
-    let k = dim(s, DimKind::ArcLength, at, ga.start_point(), ga.end_point(), ga.center, "");
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-#[derive(Default)]
-pub(super) struct AngularM {
-    handles: Vec<Handle>,
-    first: Option<(Vec2, Vec2)>,
-    second: Option<(Vec2, Vec2)>,
-    vertex_mode: Vec<Vec2>,
-    vertex: bool,
-    arc: Option<(Vec2, Vec2, Vec2)>,
-    text: DimText,
-    /// Quadrant: a point inside the angle to measure; the arc location then only sets the radius.
-    quadrant: Option<Vec2>,
-    asking_quadrant: bool,
-}
-
-impl AngularM {
-    /// (vertex, p1, p2) of the angle being dimensioned.
-    fn geometry(&self) -> Option<(Vec2, Vec2, Vec2)> {
-        if let Some(a) = self.arc {
-            return Some(a);
-        }
-        if let [v, a, b] = self.vertex_mode.as_slice() {
-            return Some((*v, *a, *b));
-        }
-        let ((a1, a2), (b1, b2)) = (self.first?, self.second?);
-        let (v, _, _) = cadcraft_geom::line_line_infinite(a1, a2, b1, b2)?;
-        let far = |p: Vec2, q: Vec2| if p.dist(v) > q.dist(v) { p } else { q };
-        Some((v, far(a1, a2), far(b1, b2)))
-    }
-    /// The arc location `at`, turned into the locked quadrant (same radius) when one is set.
-    fn located(&self, v: Vec2, at: Vec2) -> Vec2 {
-        match self.quadrant {
-            Some(q) if q.dist(v) > 1e-12 && at.dist(v) > 1e-12 => v + (q - v).normalized() * at.dist(v),
-            _ => at,
-        }
-    }
-}
-
-impl Interactive for AngularM {
-    fn name(&self) -> &'static str {
-        "DIMANGULAR"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(p) = self.text.prompt() {
-            return p;
-        }
-        if self.asking_quadrant {
-            return Prompt::new("Specify quadrant", Accept::POINT);
-        }
-        if self.geometry().is_some() {
-            return Prompt::new("Specify dimension arc line location", Accept::POINT).kw(&["Mtext", "Text", "Angle", "Quadrant"]);
-        }
-        if self.vertex {
-            return Prompt::new(
-                ["Specify angle vertex", "Specify first angle endpoint", "Specify second angle endpoint"]
-                    .get(self.vertex_mode.len())
-                    .copied()
-                    .unwrap_or(""),
-                Accept::POINT,
-            );
-        }
-        match self.first {
-            None => Prompt::new("Select arc, circle, line", Accept::POINT).default("specify vertex"),
-            Some(_) => Prompt::new("Select second line", Accept::POINT),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.text.answer(s, &i) {
-            return Ok(Step::Continue);
-        }
-        if self.asking_quadrant {
-            if let Input::Point(q) = i {
-                self.quadrant = Some(q);
-            }
-            self.asking_quadrant = false;
-            return Ok(Step::Continue);
-        }
-        if let Some((v, a, b)) = self.geometry() {
-            return match i {
-                Input::Point(at) => {
-                    let at = self.located(v, at);
-                    let k = match (self.handles.as_slice(), self.arc) {
-                        ([h1, h2], None) => angular_from_lines(s, *h1, *h2, at),
-                        _ => None,
-                    };
-                    let k = k.unwrap_or_else(|| dim(s, DimKind::Angular3P, at, a, b, v, ""));
-                    add_dim(s, self.text.apply(k))?;
-                    Ok(Step::Done)
-                }
-                Input::Keyword(k) => {
-                    if k == "Quadrant" {
-                        self.asking_quadrant = true;
-                    } else {
-                        self.text.keyword(&k);
-                    }
-                    Ok(Step::Continue)
-                }
-                Input::Enter => Ok(Step::Cancel),
-                _ => Ok(Step::Continue),
-            };
-        }
-        if self.vertex {
-            match i {
-                Input::Point(p) => self.vertex_mode.push(p),
-                Input::Enter => return Ok(Step::Cancel),
-                _ => {}
-            }
-            return Ok(Step::Continue);
-        }
-        match i {
-            Input::Enter if self.first.is_none() => {
-                self.vertex = true;
-                Ok(Step::Continue)
-            }
-            Input::Point(p) => {
-                let Some(h) = pick_at(s, p) else {
-                    s.echo("*Invalid selection*");
-                    return Ok(Step::Continue);
-                };
-                let circle = s
-                    .doc()?
-                    .entity(h)
-                    .and_then(|e| if let EntityKind::Circle(c) = &e.kind { Some(cadcraft_geom::Circle::new(c.center.xy(), c.radius)) } else { None });
-                if let Some(g) = circle.filter(|_| self.first.is_none()) {
-                    // The center is the vertex and the pick the first endpoint; ask for the second.
-                    self.vertex = true;
-                    self.vertex_mode = vec![g.center, g.closest(p)];
-                    return Ok(Step::Continue);
-                }
-                match segment_at(s, h, p) {
-                    Some(Segment::Arc { arc: g, .. }) if self.first.is_none() => {
-                        self.arc = Some((g.center, g.start_point(), g.end_point()));
-                    }
-                    Some(Segment::Line(l)) => {
-                        self.handles.push(h);
-                        let seg = (l.a, l.b);
-                        if self.first.is_none() {
-                            self.first = Some(seg);
-                        } else {
-                            self.second = Some(seg);
-                        }
-                    }
-                    _ => s.echo("Select an arc, circle or line."),
-                }
-                Ok(Step::Continue)
-            }
-            Input::Enter => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.geometry().map(|(v, a, b)| vec![self.text.apply(dim(s, DimKind::Angular3P, self.located(v, c), a, b, v, ""))]).unwrap_or_default()
-    }
-}
-
-#[derive(Default)]
-pub(super) struct ArcLenM {
-    arc: Option<cadcraft_geom::Arc>,
-    text: DimText,
-    /// Partial: the points picked so far on the arc (`None` when not choosing a part).
-    partial: Option<Vec<Vec2>>,
-}
-
-/// The part of `arc` between the points nearest `p` and `q` (in the arc's direction).
-fn arc_part(arc: &cadcraft_geom::Arc, p: Vec2, q: Vec2) -> Option<cadcraft_geom::Arc> {
-    let sweep = arc.sweep();
-    // Offset along the arc from its start, clamped to the nearer end when the point is off the arc.
-    let along = |x: Vec2| {
-        let t = cadcraft_geom::ccw_sweep(arc.start, arc.center.angle_to(x));
-        if t <= sweep {
-            t
-        } else if t - sweep < std::f64::consts::TAU - t {
-            sweep
-        } else {
-            0.0
-        }
-    };
-    let (t1, t2) = (along(p), along(q));
-    let (lo, hi) = (t1.min(t2), t1.max(t2));
-    (hi - lo > 1e-9).then(|| cadcraft_geom::Arc::new(arc.center, arc.radius, arc.start + lo, arc.start + hi))
-}
-
-impl Interactive for ArcLenM {
-    fn name(&self) -> &'static str {
-        "DIMARC"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(p) = self.text.prompt() {
-            return p;
-        }
-        if let Some(picked) = &self.partial {
-            return match picked.first() {
-                None => Prompt::new("Specify first point for arc length dimension", Accept::POINT),
-                Some(&f) => Prompt::new("Specify second point for arc length dimension", Accept::POINT).base(f),
-            };
-        }
-        match self.arc {
-            None => Prompt::new("Select arc or polyline arc segment", Accept::POINT),
-            Some(_) => Prompt::new("Specify arc length dimension location", Accept::POINT).kw(&["Mtext", "Text", "Angle", "Partial"]),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.text.answer(s, &i) {
-            return Ok(Step::Continue);
-        }
-        if let Some(picked) = self.partial.take() {
-            match (i, picked.first().copied(), self.arc) {
-                (Input::Point(p), None, _) => self.partial = Some(vec![p]),
-                (Input::Point(q), Some(p), Some(g)) => match arc_part(&g, p, q) {
-                    Some(part) => self.arc = Some(part),
-                    None => s.echo("The two points must be different."),
-                },
-                (Input::Enter, ..) => {}
-                _ => self.partial = Some(picked),
-            }
-            return Ok(Step::Continue);
-        }
-        match (self.arc, i) {
-            (None, Input::Point(p)) => {
-                if let Some(EntityKind::Arc(a)) = pick_at(s, p).and_then(|h| s.doc().ok()?.entity(h).map(|e| e.kind.clone())) {
-                    self.arc = Some(cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end));
-                } else {
-                    s.echo("Select an arc.");
-                }
-                Ok(Step::Continue)
-            }
-            (Some(g), Input::Point(at)) => {
-                add_dim(s, self.text.apply(dim(s, DimKind::ArcLength, at, g.start_point(), g.end_point(), g.center, "")))?;
-                Ok(Step::Done)
-            }
-            (Some(_), Input::Keyword(k)) => {
-                if k == "Partial" {
-                    self.partial = Some(Vec::new());
-                } else {
-                    self.text.keyword(&k);
-                }
-                Ok(Step::Continue)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.partial.is_some() {
-            return Vec::new();
-        }
-        self.arc.map(|g| vec![self.text.apply(dim(s, DimKind::ArcLength, c, g.start_point(), g.end_point(), g.center, ""))]).unwrap_or_default()
-    }
-}
@@ -1,170 +0,0 @@
-use super::{Accept, DimAssoc, DimKind, Dimension, EntityKind, Handle, Input, Prompt, Result, Segment, Session, Value, Vec2, Vec3, v3};
-
-pub(super) fn style(s: &Session) -> String {
-    s.doc().map(|d| d.header.str("DIMSTYLE", "Standard")).unwrap_or_else(|_| "Standard".into())
-}
-
-pub(super) fn dim(s: &Session, kind: DimKind, defpt: Vec2, p13: Vec2, p14: Vec2, p15: Vec2, text: &str) -> EntityKind {
-    EntityKind::Dimension(Dimension {
-        kind,
-        defpt: v3(defpt),
-        text_mid: Vec3::ZERO,
-        p13: v3(p13),
-        p14: v3(p14),
-        p15: v3(p15),
-        p16: v3(Vec2::ZERO),
-        text: text.into(),
-        style: style(s),
-        measurement: 0.0,
-        text_rotation: 0.0,
-        user_text_pos: false,
-        block: None,
-        overrides: s.doc().map(|d| d.dim_overrides()).unwrap_or_default(),
-        assoc: Vec::new(),
-        marks: Default::default(),
-    })
-}
-
-/// Horizontal (0) or vertical (90°) from where the dimension line is placed (AutoCAD's rule).
-fn auto_rotation(p1: Vec2, p2: Vec2, at: Vec2) -> f64 {
-    let (x0, x1) = (p1.x.min(p2.x), p1.x.max(p2.x));
-    let (y0, y1) = (p1.y.min(p2.y), p1.y.max(p2.y));
-    let outside_y = at.y < y0 || at.y > y1;
-    let outside_x = at.x < x0 || at.x > x1;
-    if outside_x && !outside_y { std::f64::consts::FRAC_PI_2 } else { 0.0 }
-}
-
-pub(super) fn linear_kind(p1: Vec2, p2: Vec2, at: Vec2, rotation: Option<f64>, aligned: bool) -> DimKind {
-    if aligned { DimKind::Aligned } else { DimKind::Linear { rotation: rotation.unwrap_or_else(|| auto_rotation(p1, p2, at)) } }
-}
-
-/// Add a dimension. With DIMASSOC on, definition points that sit on object endpoints,
-/// vertices or centres are attached to them (associative dimensions).
-pub(super) fn add_dim(s: &mut Session, k: EntityKind) -> Result<Handle> {
-    let mut k = k;
-    if let EntityKind::Dimension(dm) = &mut k
-        && dm.assoc.is_empty()
-        && assoc_enabled(s)
-    {
-        dm.assoc = crate::assoc::reassociate(s.doc()?, &s.space(), dm);
-    }
-    let h = s.add_entity(k)?;
-    s.last_dim = Some(h);
-    Ok(h)
-}
-
-pub(super) fn assoc_enabled(s: &Session) -> bool {
-    s.doc().map(|d| d.header.i64("DIMASSOC", 2) != 0).unwrap_or(false)
-}
-
-pub(super) fn with_assoc(k: EntityKind, assoc: Vec<DimAssoc>) -> EntityKind {
-    match k {
-        EntityKind::Dimension(mut d) => {
-            d.assoc = assoc;
-            EntityKind::Dimension(d)
-        }
-        other => other,
-    }
-}
-
-/// Centre and radius of a circle/arc entity.
-pub(super) fn circle_of(s: &Session, h: Handle) -> Option<(Vec2, f64)> {
-    match &s.doc().ok()?.entity(h)?.kind {
-        EntityKind::Circle(c) => Some((c.center.xy(), c.radius)),
-        EntityKind::Arc(a) => Some((a.center.xy(), a.radius)),
-        _ => None,
-    }
-}
-
-/// The dimension line location of a radius/diameter dimension puts the text there, inside or
-/// outside the circle, as a user-positioned text (DXF flag 70 bit 128), like AutoCAD.
-pub(super) fn text_at(mut k: EntityKind, at: Vec2) -> EntityKind {
-    if let EntityKind::Dimension(d) = &mut k {
-        d.text_mid = v3(at);
-        d.user_text_pos = true;
-    }
-    k
-}
-
-pub(super) fn hex_param(p: &Value, key: &str) -> Option<Handle> {
-    p.get(key).and_then(|v| v.as_str().and_then(Handle::parse_hex).or_else(|| v.as_u64().map(Handle)))
-}
-
-// ---------------- interactive ----------------
-
-pub(super) fn pick_at(s: &Session, p: Vec2) -> Option<Handle> {
-    let ap = s.pixel_size() * s.settings.pickbox.max(1.0) * 1.5;
-    crate::select::pick(s.doc().ok()?, &s.space(), p, ap)
-}
-
-/// The straight or curved piece of `h` picked at `p`: a line, an arc, or the polyline segment nearest `p`.
-pub(in crate::cmd) fn segment_at(s: &Session, h: Handle, p: Vec2) -> Option<Segment> {
-    match &s.doc().ok()?.entity(h)?.kind {
-        EntityKind::Line(l) => Some(Segment::Line(cadcraft_geom::Line::new(l.a.xy(), l.b.xy()))),
-        EntityKind::Arc(a) => Some(Segment::Arc { arc: cadcraft_geom::Arc::new(a.center.xy(), a.radius, a.start, a.end), ccw: true }),
-        EntityKind::LwPolyline(pl) => cadcraft_geom::Polyline { vertices: pl.vertices.clone(), closed: pl.closed }
-            .segments()
-            .into_iter()
-            .min_by(|x, y| x.closest(p).dist(p).total_cmp(&y.closest(p).dist(p))),
-        _ => None,
-    }
-}
-
-/// What a dimension placement prompt asks after Mtext, Text or Angle.
-#[derive(Clone, Copy, PartialEq)]
-enum DimAsk {
-    Text,
-    Angle,
-}
-
-/// The Mtext / Text / Angle options of the dimension placement prompts: replace the measured text
-/// (`<>` stands for the measurement) and rotate the text.
-#[derive(Default)]
-pub(super) struct DimText {
-    text: String,
-    angle: f64,
-    asking: Option<DimAsk>,
-}
-
-impl DimText {
-    /// Opens the sub-prompt for Mtext, Text or Angle; `false` for any other keyword.
-    pub(super) fn keyword(&mut self, k: &str) -> bool {
-        self.asking = match k {
-            "Mtext" | "Text" => Some(DimAsk::Text),
-            "Angle" => Some(DimAsk::Angle),
-            _ => return false,
-        };
-        true
-    }
-    pub(super) fn prompt(&self) -> Option<Prompt> {
-        Some(match self.asking? {
-            DimAsk::Text => Prompt::new("Enter dimension text (<> = measurement)", Accept::TEXT),
-            DimAsk::Angle => Prompt::new("Specify angle of dimension text", Accept::NUMBER),
-        })
-    }
-    /// Takes the answer to the open sub-prompt (Enter keeps the current value); `false` when none is open.
-    pub(super) fn answer(&mut self, s: &mut Session, i: &Input) -> bool {
-        let Some(a) = self.asking else { return false };
-        match (a, i) {
-            (DimAsk::Text, Input::Text(t)) => self.text = t.clone(),
-            (DimAsk::Angle, Input::Text(t)) => match s.angle_settings().direction(t) {
-                Some(r) => self.angle = r,
-                None => {
-                    s.echo("Requires a valid angle.");
-                    return true;
-                }
-            },
-            _ => {}
-        }
-        self.asking = None;
-        true
-    }
-    /// `k` with this text and text angle.
-    pub(super) fn apply(&self, mut k: EntityKind) -> EntityKind {
-        if let EntityKind::Dimension(d) = &mut k {
-            d.text = self.text.clone();
-            d.text_rotation = self.angle;
-        }
-        k
-    }
-}
@@ -1,374 +0,0 @@
-use super::common::{hex_param, style};
-use super::{
-    Accept, DimKind, EntityKind, Handle, Input, Interactive, Prompt, Result, SelOutcome, SelectPhase, Session, Step, Value, Vec2, bad, json,
-    point_param, str_param, targets, v3,
-};
-
-pub(super) fn run_update(s: &mut Session, p: &Value) -> Result<Value> {
-    let hs = targets(s, p)?;
-    let st = style(s);
-    let d = s.doc_mut()?;
-    let mut n = 0;
-    for h in hs {
-        let _ = d.modify_entity(h, |e| {
-            if let EntityKind::Dimension(dm) = &mut e.kind {
-                dm.style = st.clone();
-                dm.block = None;
-                n += 1;
-            }
-        });
-    }
-    Ok(json!({ "updated": n }))
-}
-
-/// DIMOVERRIDE: per-dimension style overrides (`clear` removes them); `text` sets the text.
-pub(super) fn run_override(s: &mut Session, p: &Value) -> Result<Value> {
-    if p.get("text").is_none() {
-        return crate::cmd::props::dim_override(s, p);
-    }
-    let hs = targets(s, p)?;
-    let t = str_param(p, "text").unwrap_or("").to_string();
-    // Dimension variables given next to `text` are applied first, so an unknown name still errors before anything changes.
-    let vars: serde_json::Map<String, Value> = p
-        .as_object()
-        .map(|o| o.iter().filter(|(k, _)| !matches!(k.as_str(), "text" | "handles" | "handle")).map(|(k, v)| (k.clone(), v.clone())).collect())
-        .unwrap_or_default();
-    let mut ignored = Value::Null;
-    if !vars.is_empty() {
-        let mut rest = vars;
-        rest.insert("handles".into(), json!(hs.iter().map(|h| h.hex()).collect::<Vec<_>>()));
-        ignored = crate::cmd::props::dim_override(s, &Value::Object(rest))?.get("ignored").cloned().unwrap_or(Value::Null);
-    }
-    let d = s.doc_mut()?;
-    for h in &hs {
-        let _ = d.modify_entity(*h, |e| {
-            if let EntityKind::Dimension(dm) = &mut e.kind {
-                dm.text = t.clone();
-                dm.block = None;
-            }
-        });
-    }
-    match ignored {
-        Value::Null => Ok(json!({ "changed": hs.len() })),
-        ig => Ok(json!({ "changed": hs.len(), "ignored": ig })),
-    }
-}
-
-pub(super) fn dims_of(s: &Session, hs: &[Handle]) -> Vec<Handle> {
-    let Ok(d) = s.doc() else { return Vec::new() };
-    hs.iter().copied().filter(|h| d.entity(*h).is_some_and(|e| matches!(e.kind, EntityKind::Dimension(_)))).collect()
-}
-
-pub(super) fn run_reassociate(s: &mut Session, p: &Value) -> Result<Value> {
-    let hs = dims_of(s, &targets(s, p)?);
-    let space = s.space();
-    let mut plan = Vec::new();
-    {
-        let d = s.doc()?;
-        for h in &hs {
-            if let Some(EntityKind::Dimension(dm)) = d.entity(*h).map(|e| &e.kind) {
-                plan.push((*h, crate::assoc::reassociate(d, &space, dm)));
-            }
-        }
-    }
-    let mut points = 0;
-    let mut n = 0;
-    let d = s.doc_mut()?;
-    for (h, a) in plan {
-        points += a.len();
-        n += usize::from(!a.is_empty());
-        let _ = d.modify_entity(h, |e| {
-            if let EntityKind::Dimension(dm) = &mut e.kind {
-                dm.assoc = a;
-            }
-        });
-    }
-    Ok(json!({ "dimensions": hs.len(), "associated": n, "points": points, "message": format!("{n} of {} dimension(s) associated.", hs.len()) }))
-}
-
-pub(super) fn run_disassociate(s: &mut Session, p: &Value) -> Result<Value> {
-    let hs = dims_of(s, &targets(s, p)?);
-    let d = s.doc_mut()?;
-    let mut n = 0;
-    for h in &hs {
-        let _ = d.modify_entity(*h, |e| {
-            if let EntityKind::Dimension(dm) = &mut e.kind
-                && !dm.assoc.is_empty()
-            {
-                dm.assoc.clear();
-                n += 1;
-            }
-        });
-    }
-    Ok(json!({ "disassociated": n, "message": format!("{n} disassociated.") }))
-}
-
-/// DIMTEDIT: move/rotate/justify dimension text.
-pub(super) fn run_tedit(s: &mut Session, p: &Value, mode: &str) -> Result<Value> {
-    let mut q = p.as_object().cloned().unwrap_or_default();
-    q.insert("mode".into(), json!(mode));
-    run_dimtedit(s, &Value::Object(q))
-}
-
-pub(super) fn run_dimtedit(s: &mut Session, p: &Value) -> Result<Value> {
-    let hs = dims_of(s, &targets(s, p)?);
-    if hs.is_empty() {
-        return Err(bad("dimtedit", "select dimensions"));
-    }
-    let mode = str_param(p, "mode").unwrap_or("").to_ascii_lowercase();
-    let at = point_param(p, "at");
-    let angle = p.get("angle").and_then(Value::as_f64).filter(|a| a.is_finite()).map(f64::to_radians);
-    if mode == "angle" && angle.is_none() {
-        return Err(bad("dimtedit", "`angle` (degrees) is required"));
-    }
-    let d = s.doc_mut()?;
-    let dimscale = d.header.f64("DIMSCALE", 1.0);
-    for h in &hs {
-        let st = match d.entity(*h).map(|e| &e.kind) {
-            Some(EntityKind::Dimension(dm)) => d.dim_style(&dm.style).cloned().unwrap_or_default().with_overrides(&dm.overrides),
-            _ => continue,
-        };
-        d.modify_entity(*h, |e| {
-            let EntityKind::Dimension(dm) = &mut e.kind else { return };
-            dm.block = None;
-            if let Some(q) = at {
-                dm.text_mid = v3(q);
-                dm.user_text_pos = true;
-                // DIMTMOVE 0: the dimension line moves with the text.
-                st.follow_text(dm, dimscale);
-            }
-            match mode.as_str() {
-                "home" => {
-                    dm.user_text_pos = false;
-                    dm.text_rotation = 0.0;
-                    dm.overrides.remove("textJust");
-                }
-                "angle" => dm.text_rotation = angle.unwrap_or(0.0),
-                "left" | "center" | "right" => {
-                    dm.user_text_pos = false;
-                    let j = match mode.as_str() {
-                        "left" => 1,
-                        "right" => 2,
-                        _ => 0,
-                    };
-                    dm.overrides.insert("textJust".into(), json!(j));
-                }
-                _ => {}
-            }
-        })?;
-    }
-    Ok(json!({ "changed": hs.len() }))
-}
-
-/// DIMSPACE: equal spacing of parallel linear dimensions from a base dimension.
-pub(super) fn run_dimspace(s: &mut Session, p: &Value) -> Result<Value> {
-    let base = hex_param(p, "base").ok_or_else(|| bad("dimspace", "`base` dimension is required"))?;
-    let hs: Vec<Handle> = dims_of(s, &targets(s, p)?).into_iter().filter(|h| *h != base).collect();
-    let d = s.doc()?;
-    let Some(EntityKind::Dimension(b)) = d.entity(base).map(|e| e.kind.clone()) else { return Err(bad("dimspace", "`base` is not a dimension")) };
-    let st = d.dim_style(&b.style).cloned().unwrap_or_default().with_overrides(&b.overrides);
-    let spacing = p
-        .get("spacing")
-        .and_then(Value::as_f64)
-        .filter(|v| v.is_finite() && *v >= 0.0)
-        .unwrap_or(st.baseline_spacing * st.effective_scale(d.header.f64("DIMSCALE", 1.0)) * 2.0);
-    let dir = match b.kind {
-        DimKind::Linear { rotation } => Vec2::from_angle(rotation),
-        DimKind::Aligned => (b.p14.xy() - b.p13.xy()).normalized(),
-        _ => return Err(bad("dimspace", "base must be a linear or aligned dimension")),
-    };
-    let n = dir.perp();
-    let base_off = (b.defpt.xy() - b.p13.xy()).dot(n);
-    let side = if base_off >= 0.0 { 1.0 } else { -1.0 };
-    // Order the others by their current distance from the base line.
-    let mut others: Vec<(Handle, f64)> = hs
-        .iter()
-        .filter_map(|h| match d.entity(*h).map(|e| &e.kind) {
-            Some(EntityKind::Dimension(o)) if matches!(o.kind, DimKind::Linear { .. } | DimKind::Aligned) => {
-                Some((*h, (o.defpt.xy() - b.defpt.xy()).dot(n) * side))
-            }
-            _ => None,
-        })
-        .collect();
-    others.sort_by(|a, c| a.1.total_cmp(&c.1));
-    let line_pt = b.defpt.xy();
-    let dm = s.doc_mut()?;
-    for (i, (h, _)) in others.iter().enumerate() {
-        let target = line_pt + n * (side * spacing * (i as f64 + 1.0));
-        dm.modify_entity(*h, |e| {
-            if let EntityKind::Dimension(o) = &mut e.kind {
-                let cur = o.defpt.xy();
-                let moved = cur + n * (target - cur).dot(n);
-                o.defpt = v3(moved);
-                o.user_text_pos = false;
-                o.block = None;
-            }
-        })?;
-    }
-    Ok(json!({ "spaced": others.len() }))
-}
-
-/// DIMSPACE at the command line: select the base dimension, select the dimensions to space, then
-/// the spacing (Enter or Auto takes the DIMDLI-based default).
-#[derive(Default)]
-pub(super) struct DimSpaceM {
-    base: Option<Handle>,
-    sel: SelectPhase,
-    spacing_phase: bool,
-}
-
-impl DimSpaceM {
-    fn apply(&self, s: &mut Session, base: Handle, spacing: Option<f64>) -> Result<Step> {
-        let mut p = serde_json::Map::new();
-        p.insert("base".into(), json!(base.hex()));
-        p.insert("handles".into(), json!(self.sel.picked.iter().map(|h| h.hex()).collect::<Vec<_>>()));
-        if let Some(v) = spacing {
-            p.insert("spacing".into(), json!(v));
-        }
-        let r = run_dimspace(s, &Value::Object(p))?;
-        s.set_selection(Vec::new());
-        s.echo(format!("{} dimension(s) spaced.", r.get("spaced").and_then(Value::as_u64).unwrap_or(0)));
-        Ok(Step::Done)
-    }
-}
-
-impl Interactive for DimSpaceM {
-    fn name(&self) -> &'static str {
-        "DIMSPACE"
-    }
-    fn begin(&mut self, _s: &mut Session) -> Result<Step> {
-        self.sel = SelectPhase::single();
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if self.spacing_phase {
-            return Prompt::new("Enter value", Accept::NUMBER).kw(&["Auto"]).default("Auto");
-        }
-        if self.base.is_none() {
-            return Prompt::new("Select base dimension", Accept::SELECT);
-        }
-        Prompt::new("Select dimensions to space", Accept::SELECT)
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.spacing_phase {
-            let Some(base) = self.base else { return Ok(Step::Cancel) };
-            return match i {
-                Input::Enter => self.apply(s, base, None),
-                Input::Keyword(k) | Input::Text(k) if k.trim().eq_ignore_ascii_case("a") || k.trim().eq_ignore_ascii_case("auto") => {
-                    self.apply(s, base, None)
-                }
-                Input::Text(t) => match crate::cmd::machines::number(&t).filter(|v| v.is_finite() && *v >= 0.0) {
-                    Some(v) => self.apply(s, base, Some(v)),
-                    None => {
-                        s.echo("Requires a non-negative number or Auto.");
-                        Ok(Step::Continue)
-                    }
-                },
-                _ => Ok(Step::Continue),
-            };
-        }
-        match self.sel.feed(s, &i)? {
-            SelOutcome::More => Ok(Step::Continue),
-            SelOutcome::Empty => Ok(Step::Done),
-            SelOutcome::Done(hs) => {
-                if self.base.is_none() {
-                    match hs.first().copied().filter(|h| !dims_of(s, &[*h]).is_empty()) {
-                        Some(b) => {
-                            self.base = Some(b);
-                            self.sel = SelectPhase::default();
-                        }
-                        None => {
-                            s.echo("Select a dimension.");
-                            self.sel = SelectPhase::single();
-                        }
-                    }
-                } else {
-                    self.sel.picked = hs;
-                    self.spacing_phase = true;
-                }
-                Ok(Step::Continue)
-            }
-        }
-    }
-}
-
-/// DIMOVERRIDE at the command line: variable, value (repeat), Enter, then select dimensions.
-pub(super) struct OverrideM {
-    vars: serde_json::Map<String, Value>,
-    var: Option<String>,
-    clear: bool,
-    selecting: Option<crate::cmd::machines::SelectPhase>,
-}
-
-impl OverrideM {
-    pub(super) fn new(_s: &Session) -> Self {
-        OverrideM { vars: serde_json::Map::new(), var: None, clear: false, selecting: None }
-    }
-    fn apply(&self, s: &mut Session, hs: Vec<Handle>) -> Result<Step> {
-        let mut p = self.vars.clone();
-        p.insert("handles".into(), json!(hs.iter().map(|h| h.hex()).collect::<Vec<_>>()));
-        if self.clear {
-            p.insert("clear".into(), json!(true));
-        }
-        let r = crate::cmd::props::dim_override(s, &Value::Object(p))?;
-        s.echo(format!("{} dimension(s) changed.", r.get("changed").and_then(Value::as_u64).unwrap_or(0)));
-        Ok(Step::Done)
-    }
-}
-
-impl Interactive for OverrideM {
-    fn name(&self) -> &'static str {
-        "DIMOVERRIDE"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(sel) = &self.selecting {
-            return sel.prompt();
-        }
-        match &self.var {
-            Some(v) => Prompt::new(format!("Enter new value for dimension variable {}", v.to_ascii_uppercase()), Accept::TEXT),
-            None => Prompt::new("Enter dimension variable name to override", Accept::TEXT).kw(&["Clear overrides"]),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(sel) = &mut self.selecting {
-            return match sel.feed(s, &i)? {
-                crate::cmd::machines::SelOutcome::More => Ok(Step::Continue),
-                crate::cmd::machines::SelOutcome::Empty => Ok(Step::Done),
-                crate::cmd::machines::SelOutcome::Done(hs) => self.apply(s, hs),
-            };
-        }
-        match (self.var.take(), i) {
-            (None, Input::Keyword(k)) if k.starts_with("Clear") => {
-                self.clear = true;
-                self.selecting = Some(crate::cmd::machines::SelectPhase::default());
-            }
-            (None, Input::Text(t)) => {
-                let t = t.trim().to_string();
-                if t.eq_ignore_ascii_case("c") {
-                    self.clear = true;
-                    self.selecting = Some(crate::cmd::machines::SelectPhase::default());
-                } else if cadcraft_doc::DimStyle::field_name(&t).is_some() {
-                    self.var = Some(t);
-                } else {
-                    s.echo(format!("Unknown dimension variable \"{t}\"."));
-                }
-            }
-            (None, Input::Enter) => {
-                if self.vars.is_empty() {
-                    return Ok(Step::Cancel);
-                }
-                self.selecting = Some(crate::cmd::machines::SelectPhase::default());
-            }
-            (Some(v), Input::Text(t)) => {
-                let val = t.trim().parse::<f64>().map(|x| json!(x)).unwrap_or_else(|_| json!(t.trim()));
-                self.vars.insert(v, val);
-            }
-            (Some(v), _) => self.var = Some(v),
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-    fn preview(&self, _s: &Session, _c: Vec2) -> Vec<EntityKind> {
-        Vec::new()
-    }
-}
@@ -1,363 +0,0 @@
-use super::common::{DimText, add_dim, assoc_enabled, circle_of, dim, linear_kind, pick_at};
-use super::{
-    Accept, DimKind, Dimension, EngineError, EntityKind, Handle, Input, Interactive, Prim, Prompt, Result, Segment, Session, Step, Value, Vec2, bad,
-    json, point_req, points_param, str_param, v3,
-};
-
-pub(super) fn run_linear(s: &mut Session, p: &Value) -> Result<Value> {
-    let (a, b) = match p.get("object").and_then(|v| v.as_str().and_then(Handle::parse_hex).or_else(|| v.as_u64().map(Handle))) {
-        Some(h) => object_extent(s, h).ok_or_else(|| bad("dimlinear", "`object` must be a line, arc, circle or polyline segment"))?,
-        None => (point_req("dimlinear", p, "p1")?, point_req("dimlinear", p, "p2")?),
-    };
-    let at = point_req("dimlinear", p, "at")?;
-    let rot = p.get("rotation").and_then(Value::as_f64).map(f64::to_radians);
-    let k = dim(s, linear_kind(a, b, at, rot, false), at, a, b, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-pub(super) fn run_aligned(s: &mut Session, p: &Value) -> Result<Value> {
-    let a = point_req("dimaligned", p, "p1")?;
-    let b = point_req("dimaligned", p, "p2")?;
-    let at = point_req("dimaligned", p, "at")?;
-    let k = dim(s, DimKind::Aligned, at, a, b, Vec2::ZERO, str_param(p, "text").unwrap_or(""));
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-pub(super) fn run_ordinate(s: &mut Session, p: &Value) -> Result<Value> {
-    let f = point_req("dimordinate", p, "feature")?;
-    let l = point_req("dimordinate", p, "leader")?;
-    let xtype = p.get("xtype").and_then(Value::as_bool).unwrap_or((l - f).y.abs() > (l - f).x.abs());
-    let k = dim(s, DimKind::Ordinate { x_type: xtype }, Vec2::ZERO, f, l, Vec2::ZERO, "");
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-/// The last linear/aligned dimension (for CONTINUE/BASELINE).
-fn last_linear(s: &Session) -> Option<Dimension> {
-    let h = s.last_dim?;
-    match &s.doc().ok()?.entity(h)?.kind {
-        EntityKind::Dimension(d) if matches!(d.kind, DimKind::Linear { .. } | DimKind::Aligned) => Some(d.clone()),
-        _ => None,
-    }
-}
-
-/// Next dimension in a chain from `prev` to a new second origin.
-fn chained(s: &Session, prev: &Dimension, next: Vec2, baseline: bool) -> EntityKind {
-    // DIMDLI × the overall scale of the dimension being continued: its overrides (SETVAR DIM*)
-    // included, and DIMSCALE 0 falling back to the drawing's DIMSCALE as when it is drawn.
-    let spacing = s
-        .doc()
-        .ok()
-        .map(|d| {
-            let st = d.dim_style(&prev.style).cloned().unwrap_or_default().with_overrides(&prev.overrides);
-            st.baseline_spacing * st.effective_scale(d.header.f64("DIMSCALE", 1.0))
-        })
-        .filter(|v| v.is_finite())
-        .unwrap_or(0.38);
-    let dir = match prev.kind {
-        DimKind::Linear { rotation } => Vec2::from_angle(rotation),
-        _ => (prev.p14.xy() - prev.p13.xy()).normalized(),
-    };
-    let first = if baseline { prev.p13.xy() } else { prev.p14.xy() };
-    let mut defpt = prev.defpt.xy();
-    if baseline {
-        // Offset the dimension line away from the measured points.
-        let n = dir.perp();
-        let side = if (defpt - prev.p13.xy()).dot(n) >= 0.0 { 1.0 } else { -1.0 };
-        defpt += n * (spacing * side);
-    }
-    EntityKind::Dimension(Dimension {
-        p13: v3(first),
-        p14: v3(next),
-        defpt: v3(defpt),
-        text: String::new(),
-        block: None,
-        assoc: Vec::new(),
-        marks: Default::default(),
-        user_text_pos: false,
-        ..prev.clone()
-    })
-}
-
-/// Most dimensions one DIMCONTINUE/DIMBASELINE call adds.
-pub(super) const MAX_CHAIN: usize = 100_000;
-
-fn chain_run(s: &mut Session, p: &Value, baseline: bool) -> Result<Value> {
-    let id = if baseline { "dimbaseline" } else { "dimcontinue" };
-    let pts = p.get("points").and_then(Value::as_array).ok_or_else(|| bad(id, "`points` is required"))?;
-    if pts.len() > MAX_CHAIN {
-        return Err(bad(id, format!("at most {MAX_CHAIN} `points` per call")));
-    }
-    let pts = points_param(p, "points").ok_or_else(|| bad(id, "`points` must be a list of points"))?;
-    // One snap index for the whole chain: looking up each new point's object by scanning the
-    // drawing made long chains quadratic (the added dimensions are no snap targets).
-    let snaps = if assoc_enabled(s) { Some(crate::assoc::SnapIndex::new(s.doc()?, &s.space())) } else { None };
-    let mut out = Vec::new();
-    for q in pts {
-        let prev = last_linear(s).ok_or_else(|| bad(id, "no linear dimension to continue"))?;
-        let mut k = chained(s, &prev, q, baseline);
-        if let (Some(ix), EntityKind::Dimension(dm)) = (&snaps, &mut k) {
-            dm.assoc = ix.auto_assoc(&[("p13", dm.p13.xy()), ("p14", dm.p14.xy())]);
-        }
-        let h = s.add_entity(k)?;
-        s.last_dim = Some(h);
-        out.push(h.hex());
-    }
-    Ok(json!({ "handles": out }))
-}
-
-pub(super) fn run_continue(s: &mut Session, p: &Value) -> Result<Value> {
-    chain_run(s, p, false)
-}
-
-pub(super) fn run_baseline(s: &mut Session, p: &Value) -> Result<Value> {
-    chain_run(s, p, true)
-}
-
-/// The two points a picked object is dimensioned between (DIMLINEAR "select object").
-fn object_extent(s: &Session, h: Handle) -> Option<(Vec2, Vec2)> {
-    let e = s.doc().ok()?.entity(h)?;
-    if let Some((c, r)) = circle_of(s, h).filter(|_| matches!(e.kind, EntityKind::Circle(_))) {
-        return Some((c - Vec2::X * r, c + Vec2::X * r));
-    }
-    e.kind.prims().into_iter().find_map(|pr| match pr {
-        Prim::Seg(sg @ (Segment::Line(_) | Segment::Arc { .. })) => Some((sg.start(), sg.end())),
-        _ => None,
-    })
-}
-
-pub(super) struct LinearM {
-    aligned: bool,
-    pts: Vec<Vec2>,
-    rotation: Option<f64>,
-    text: DimText,
-    selecting: bool,
-    /// Asking for the dimension line angle (Rotated).
-    rotating: bool,
-}
-
-impl LinearM {
-    pub(super) fn new(aligned: bool) -> Self {
-        LinearM { aligned, pts: Vec::new(), rotation: None, text: DimText::default(), selecting: false, rotating: false }
-    }
-}
-
-impl Interactive for LinearM {
-    fn name(&self) -> &'static str {
-        if self.aligned { "DIMALIGNED" } else { "DIMLINEAR" }
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if self.rotating {
-            return Prompt::new("Specify angle of dimension line", Accept::NUMBER);
-        }
-        if let Some(p) = self.text.prompt() {
-            return p;
-        }
-        if self.selecting {
-            return Prompt::new("Select object to dimension", Accept::POINT);
-        }
-        match self.pts.len() {
-            0 => Prompt::new("Specify first extension line origin", Accept::POINT).default("select object"),
-            1 => Prompt::new("Specify second extension line origin", Accept::POINT).base_opt(self.pts.first().copied()),
-            // Once the orientation is forced, only the text options remain.
-            _ if self.aligned || self.rotation.is_some() => {
-                Prompt::new("Specify dimension line location", Accept::POINT).kw(&["Mtext", "Text", "Angle"])
-            }
-            _ => Prompt::new("Specify dimension line location", Accept::POINT).kw(&["Mtext", "Text", "Angle", "Horizontal", "Vertical", "Rotated"]),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.rotating {
-            if let Input::Text(t) = &i {
-                let Some(r) = s.angle_settings().direction(t) else {
-                    s.echo("Requires a valid angle.");
-                    return Ok(Step::Continue);
-                };
-                self.rotation = Some(r);
-            }
-            self.rotating = false;
-            return Ok(Step::Continue);
-        }
-        if self.text.answer(s, &i) {
-            return Ok(Step::Continue);
-        }
-        if self.selecting {
-            if let Input::Point(p) = i {
-                let Some(h) = pick_at(s, p) else {
-                    s.echo("*Invalid selection*");
-                    return Ok(Step::Continue);
-                };
-                let seg =
-                    s.doc()?.entity(h).and_then(|e| e.kind.prims().into_iter().find_map(|pr| if let Prim::Seg(sg) = pr { Some(sg) } else { None }));
-                match seg {
-                    Some(sg @ Segment::Line(_)) | Some(sg @ Segment::Arc { .. }) => {
-                        self.pts = vec![sg.start(), sg.end()];
-                        self.selecting = false;
-                    }
-                    None => {
-                        if let Some((c, r)) = circle_of(s, h) {
-                            self.pts = vec![c - Vec2::X * r, c + Vec2::X * r];
-                            self.selecting = false;
-                        } else {
-                            s.echo("Object cannot be dimensioned this way.");
-                        }
-                    }
-                }
-            }
-            return Ok(Step::Continue);
-        }
-        match (self.pts.len(), i) {
-            (0, Input::Enter) => {
-                self.selecting = true;
-                Ok(Step::Continue)
-            }
-            (n, Input::Point(p)) if n < 2 => {
-                self.pts.push(p);
-                Ok(Step::Continue)
-            }
-            (_, Input::Point(at)) => {
-                let (Some(&a), Some(&b)) = (self.pts.first(), self.pts.get(1)) else { return Ok(Step::Continue) };
-                let k = self.text.apply(dim(s, linear_kind(a, b, at, self.rotation, self.aligned), at, a, b, Vec2::ZERO, ""));
-                add_dim(s, k)?;
-                if let Some(EntityKind::Dimension(d)) = s.last_dim.and_then(|h| s.doc().ok()?.entity(h).map(|e| e.kind.clone())) {
-                    let st = s.doc()?.dim_style(&d.style).cloned().unwrap_or_default();
-                    let g = cadcraft_render::dimension_geometry(&d, &st, 1.0);
-                    s.echo(format!("Dimension text = {}", g.value));
-                }
-                Ok(Step::Done)
-            }
-            (_, Input::Keyword(k)) => {
-                match k.as_str() {
-                    "Horizontal" => self.rotation = Some(0.0),
-                    "Vertical" => self.rotation = Some(std::f64::consts::FRAC_PI_2),
-                    "Rotated" => self.rotating = true,
-                    other => {
-                        self.text.keyword(other);
-                    }
-                }
-                Ok(Step::Continue)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        match self.pts.as_slice() {
-            [a] => vec![crate::cmd::helpers::line(*a, c)],
-            [a, b] => vec![self.text.apply(dim(s, linear_kind(*a, *b, c, self.rotation, self.aligned), c, *a, *b, Vec2::ZERO, ""))],
-            _ => Vec::new(),
-        }
-    }
-}
-
-#[derive(Default)]
-pub(super) struct OrdinateM {
-    feature: Option<Vec2>,
-    /// Xdatum / Ydatum: the forced ordinate type (`true` = X datum).
-    xtype: Option<bool>,
-    text: DimText,
-}
-
-impl OrdinateM {
-    fn kind(&self, s: &Session, f: Vec2, l: Vec2) -> EntityKind {
-        let x = self.xtype.unwrap_or((l - f).y.abs() > (l - f).x.abs());
-        self.text.apply(dim(s, DimKind::Ordinate { x_type: x }, Vec2::ZERO, f, l, Vec2::ZERO, ""))
-    }
-}
-
-impl Interactive for OrdinateM {
-    fn name(&self) -> &'static str {
-        "DIMORDINATE"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(p) = self.text.prompt() {
-            return p;
-        }
-        match (self.feature, self.xtype) {
-            (None, _) => Prompt::new("Specify feature location", Accept::POINT),
-            (Some(f), None) => Prompt::new("Specify leader endpoint", Accept::POINT).kw(&["Xdatum", "Ydatum", "Mtext", "Text", "Angle"]).base(f),
-            (Some(f), Some(_)) => Prompt::new("Specify leader endpoint", Accept::POINT).kw(&["Mtext", "Text", "Angle"]).base(f),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.text.answer(s, &i) {
-            return Ok(Step::Continue);
-        }
-        match (self.feature, i) {
-            (None, Input::Point(p)) => {
-                self.feature = Some(p);
-                Ok(Step::Continue)
-            }
-            (Some(_), Input::Keyword(k)) => {
-                match k.as_str() {
-                    "Xdatum" => self.xtype = Some(true),
-                    "Ydatum" => self.xtype = Some(false),
-                    other => {
-                        self.text.keyword(other);
-                    }
-                }
-                Ok(Step::Continue)
-            }
-            (Some(f), Input::Point(l)) => {
-                add_dim(s, self.kind(s, f, l))?;
-                Ok(Step::Done)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.feature.map(|f| vec![self.kind(s, f, c)]).unwrap_or_default()
-    }
-}
-
-pub(super) struct ChainM {
-    baseline: bool,
-    created: Vec<Handle>,
-}
-
-impl ChainM {
-    pub(super) fn new(_s: &Session, baseline: bool) -> Self {
-        ChainM { baseline, created: Vec::new() }
-    }
-}
-
-impl Interactive for ChainM {
-    fn name(&self) -> &'static str {
-        if self.baseline { "DIMBASELINE" } else { "DIMCONTINUE" }
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        if last_linear(s).is_none() {
-            s.echo("No linear dimension to continue. Create one with DIMLINEAR first.");
-            return Ok(Step::Done);
-        }
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        Prompt::new("Specify a second extension line origin", Accept::POINT)
-            .kw(&["Select", "Undo"])
-            .default("Select")
-            .base_opt(last_linear(s).map(|d| if self.baseline { d.p13.xy() } else { d.p14.xy() }))
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match i {
-            Input::Point(p) => {
-                let prev = last_linear(s).ok_or_else(|| EngineError::Other("no linear dimension".into()))?;
-                let k = chained(s, &prev, p, self.baseline);
-                self.created.push(add_dim(s, k)?);
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Undo" => {
-                if let Some(h) = self.created.pop() {
-                    s.doc_mut()?.remove_entity(h);
-                    s.last_dim = self.created.last().copied();
-                }
-                Ok(Step::Continue)
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        last_linear(s).map(|d| vec![chained(s, &d, c, self.baseline)]).unwrap_or_default()
-    }
-}
@@ -1,392 +0,0 @@
-use super::common::style;
-use super::{
-    Accept, EngineError, EntityKind, Input, Interactive, LeaderOrder, MLeader, MLeaderOptions, MText, Prompt, Result, Session, Step, Value, Vec2,
-    bad, json, points_param, str_param, v3,
-};
-
-/// A multileader from arrowhead to landing; `landing` false leaves out the landing line (dogleg).
-fn mleader_kind(s: &Session, pts: &[Vec2], text: &str, landing: bool) -> Option<EntityKind> {
-    let (landing_pt, arrow_pts) = pts.split_last()?;
-    let d = s.doc().ok()?;
-    let cur = d.header.str("CMLEADERSTYLE", "Standard");
-    let st = d.mleader_styles.iter().find(|m| m.name.eq_ignore_ascii_case(&cur)).or(d.mleader_styles.first()).cloned().unwrap_or_default();
-    // The style's sizes are the drawn sizes: a multileader style has no scale of its own and
-    // DIMSCALE (a dimension-style setting) does not apply, as in AutoCAD.
-    let th = st.text_height;
-    let dir = if arrow_pts.first().is_some_and(|a| a.x > landing_pt.x) { -1.0 } else { 1.0 };
-    let attach = if dir > 0.0 { 4 } else { 6 };
-    let dogleg = if landing { st.dogleg } else { 0.0 };
-    let tpos = *landing_pt + Vec2::new((dogleg + st.landing_gap) * dir, 0.0);
-    Some(EntityKind::MLeader(MLeader {
-        leaders: vec![arrow_pts.iter().map(|p| v3(*p)).collect()],
-        landing: v3(*landing_pt),
-        dogleg,
-        text: (!text.is_empty()).then(|| MText {
-            insert: v3(tpos),
-            height: th,
-            width: 0.0,
-            attach,
-            rotation: 0.0,
-            style: st.text_style.clone(),
-            contents: text.replace('\n', "\\P"),
-            line_spacing: 1.0,
-            line_spacing_exact: false,
-            columns: None,
-        }),
-        style: st.name.clone(),
-        arrow_size: st.arrow_size,
-        spline: false,
-        block: None,
-    }))
-}
-
-pub(super) fn run_mleader(s: &mut Session, p: &Value) -> Result<Value> {
-    let pts = points_param(p, "points").ok_or_else(|| bad("mleader", "`points` (arrow … landing) is required"))?;
-    let content = crate::cmd::mleader_content::json_content(s, p)?;
-    // Leader type None places the content at the one point given.
-    if pts.len() < 2 && !(content.leader == crate::LeaderType::None && pts.len() == 1) {
-        return Err(bad("mleader", "need an arrowhead and a landing point"));
-    }
-    let k = mleader_kind(s, &pts, str_param(p, "text").unwrap_or(""), true).ok_or_else(|| bad("mleader", "bad points"))?;
-    let k = crate::cmd::mleader_content::apply(s, k, &content)?;
-    Ok(json!({ "handle": s.add_entity(k)?.hex() }))
-}
-
-pub(super) fn run_leader(s: &mut Session, p: &Value) -> Result<Value> {
-    let pts = points_param(p, "points").ok_or_else(|| bad("leader", "`points` is required"))?;
-    if pts.len() < 2 {
-        return Err(bad("leader", "need 2+ points"));
-    }
-    let st = style(s);
-    let h = s.add_entity(EntityKind::Leader(cadcraft_doc::Leader {
-        vertices: pts.iter().map(|q| v3(*q)).collect(),
-        arrow: true,
-        spline: false,
-        style: st,
-    }))?;
-    let mut out = vec![h.hex()];
-    if let (Some(t), Some(last)) = (str_param(p, "text"), pts.last()) {
-        let th = s.doc()?.dim_style(&style(s)).map(|d| d.text_height).unwrap_or(0.18);
-        out.push(
-            s.add_entity(EntityKind::MText(MText {
-                insert: v3(*last + Vec2::new(th * 0.5, th * 0.5)),
-                height: th,
-                width: 0.0,
-                attach: 4,
-                rotation: 0.0,
-                style: "Standard".into(),
-                contents: t.into(),
-                line_spacing: 1.0,
-                line_spacing_exact: false,
-                columns: None,
-            }))?
-            .hex(),
-        );
-    }
-    Ok(json!({ "handles": out }))
-}
-
-/// The MLEADER Options prompt being answered.
-#[derive(Clone, Copy, PartialEq)]
-enum LeaderOpt {
-    Menu,
-    LeaderType,
-    Landing,
-    ContentType,
-    MaxPoints,
-    FirstAngle,
-    SecondAngle,
-    BlockName,
-    BlockAttach,
-}
-
-/// Upper bound for MLEADER Maxpoints.
-const MAX_LEADER_POINTS: usize = 64;
-
-pub(super) struct MLeaderM {
-    order: LeaderOrder,
-    /// Points in the order they were placed.
-    pts: Vec<Vec2>,
-    /// All leader points are placed.
-    leader_done: bool,
-    /// The leader text once entered (Content first enters it before the leader).
-    text: Option<String>,
-    opt: Option<LeaderOpt>,
-    max_points: usize,
-    /// First and second angle constraints (radians; 0 = free).
-    angles: [f64; 2],
-    landing: bool,
-    content: bool,
-    leader_type: crate::LeaderType,
-    /// Block content: the block (`block_name`) instead of text.
-    block: bool,
-    block_name: String,
-    block_center: bool,
-}
-
-impl MLeaderM {
-    /// Starts with the order and Options chosen the last time (as AutoCAD does).
-    pub(super) fn new(s: &Session) -> Self {
-        let o = s.last_used.mleader;
-        let max_points = o.max_points.clamp(2, MAX_LEADER_POINTS);
-        MLeaderM {
-            order: o.order,
-            pts: Vec::new(),
-            leader_done: false,
-            text: None,
-            opt: None,
-            max_points,
-            angles: o.angles,
-            landing: o.landing,
-            content: o.content,
-            leader_type: o.leader_type,
-            // Block content needs a block that still exists.
-            block: o.block && s.doc().is_ok_and(|d| d.block(&s.last_used.mleader_block).is_some()),
-            block_name: s.last_used.mleader_block.clone(),
-            block_center: o.block_center,
-        }
-    }
-    /// Keep the order and Options for the next MLEADER.
-    fn remember(&self, s: &mut Session) {
-        s.last_used.mleader = MLeaderOptions {
-            order: self.order,
-            max_points: self.max_points,
-            angles: self.angles,
-            landing: self.landing,
-            content: self.content,
-            leader_type: self.leader_type,
-            block: self.block,
-            block_center: self.block_center,
-        };
-        s.last_used.mleader_block = self.block_name.clone();
-    }
-    /// The leader type and block content for `mleader_content::apply`.
-    fn content_spec(&self) -> crate::cmd::mleader_content::Content {
-        crate::cmd::mleader_content::Content {
-            leader: self.leader_type,
-            block: (self.content && self.block).then(|| (self.block_name.clone(), self.block_center)),
-        }
-    }
-    /// Leader type None: the one point placed is the content location.
-    fn no_leader(&self) -> bool {
-        self.leader_type == crate::LeaderType::None
-    }
-    /// The leader from arrowhead to landing, with `extra` placed next.
-    fn leader(&self, extra: Option<Vec2>) -> Vec<Vec2> {
-        let mut pts = self.pts.clone();
-        pts.extend(extra);
-        if self.order != LeaderOrder::Arrowhead {
-            pts.reverse();
-        }
-        pts
-    }
-    /// `p` with the first/second angle constraint applied to the segment it ends (counted from the
-    /// first point placed).
-    fn constrained(&self, p: Vec2) -> Vec2 {
-        let (Some(&prev), Some(&inc)) = (self.pts.last(), self.angles.get(self.pts.len().wrapping_sub(1))) else { return p };
-        let len = prev.dist(p);
-        if inc <= 1e-9 || !inc.is_finite() || len <= 1e-12 {
-            return p;
-        }
-        Vec2::polar(prev, len, ((p - prev).angle() / inc).round() * inc)
-    }
-    /// The text is asked now: right after the content location (Content first) or after the leader.
-    fn wants_text(&self) -> bool {
-        self.content
-            && !self.block
-            && self.text.is_none()
-            && (self.leader_done || (self.order == LeaderOrder::Content && self.pts.len() == 1 && !self.no_leader()))
-    }
-    fn finish(&self, s: &mut Session) -> Result<Step> {
-        if self.no_leader() && !self.content {
-            s.echo("A multileader needs a leader line or content; nothing was drawn.");
-            return Ok(Step::Cancel);
-        }
-        let text = self.text.clone().unwrap_or_default();
-        let k = mleader_kind(s, &self.leader(None), &text, self.landing).ok_or_else(|| EngineError::Other("bad leader".into()))?;
-        let k = crate::cmd::mleader_content::apply(s, k, &self.content_spec())?;
-        s.add_entity(k)?;
-        Ok(Step::Done)
-    }
-    fn option_prompt(o: LeaderOpt) -> Prompt {
-        let kw = crate::cmd::curves::KW;
-        match o {
-            LeaderOpt::Menu => Prompt::new("Enter an option", kw)
-                .kw(&["Leader type", "leader lAnding", "Content type", "Maxpoints", "First angle", "Second angle", "eXit options"])
-                .default("eXit options"),
-            LeaderOpt::LeaderType => Prompt::new("Select a leader type", kw).kw(&["Straight", "sPline", "None"]).default("Straight"),
-            LeaderOpt::Landing => Prompt::new("Use landing", kw).kw(&["Yes", "No"]).default("Yes"),
-            LeaderOpt::ContentType => Prompt::new("Select a content type", kw).kw(&["Block", "Mtext", "None"]).default("Mtext"),
-            LeaderOpt::MaxPoints => Prompt::new("Enter the maximum points for leader line", Accept::NUMBER),
-            LeaderOpt::FirstAngle => Prompt::new("Enter first angle constraint", Accept::NUMBER),
-            LeaderOpt::SecondAngle => Prompt::new("Enter second angle constraint", Accept::NUMBER),
-            LeaderOpt::BlockName => Prompt::new("Enter block name", kw),
-            LeaderOpt::BlockAttach => {
-                Prompt::new("Specify block attachment", kw).kw(&["Center extents", "Insertion point"]).default("Center extents")
-            }
-        }
-    }
-    /// One answer at the Options prompts; Enter keeps the current value.
-    fn option(&mut self, s: &mut Session, o: LeaderOpt, i: Input) -> Option<LeaderOpt> {
-        use LeaderOpt::*;
-        match (o, i) {
-            (Menu, Input::Keyword(k)) => match k.as_str() {
-                "Leader type" => Some(LeaderType),
-                "leader lAnding" => Some(Landing),
-                "Content type" => Some(ContentType),
-                "Maxpoints" => Some(MaxPoints),
-                "First angle" => Some(FirstAngle),
-                "Second angle" => Some(SecondAngle),
-                _ => None,
-            },
-            (Menu, Input::Enter) => None,
-            (LeaderType, Input::Keyword(k)) => {
-                self.leader_type = match k.as_str() {
-                    "sPline" => crate::LeaderType::Spline,
-                    "None" => crate::LeaderType::None,
-                    _ => crate::LeaderType::Straight,
-                };
-                Some(Menu)
-            }
-            (Landing, Input::Keyword(k)) => {
-                self.landing = k == "Yes";
-                Some(Menu)
-            }
-            (ContentType, Input::Keyword(k)) => {
-                self.content = k != "None";
-                self.block = false;
-                // Block content asks which block, then how it attaches.
-                if k == "Block" { Some(BlockName) } else { Some(Menu) }
-            }
-            (BlockName, Input::Text(t)) => match crate::cmd::mleader_content::block_name(s, &t) {
-                Ok(n) => {
-                    self.block_name = n;
-                    self.block = true;
-                    Some(BlockAttach)
-                }
-                Err(e) => {
-                    s.echo(e.to_string());
-                    Some(BlockName)
-                }
-            },
-            (BlockName, Input::Enter) => {
-                // Enter keeps the block chosen before, if there is one.
-                if crate::cmd::mleader_content::block_name(s, &self.block_name).is_ok() {
-                    self.block = true;
-                    Some(BlockAttach)
-                } else {
-                    s.echo("Requires the name of a block defined in the drawing.");
-                    Some(BlockName)
-                }
-            }
-            (BlockAttach, Input::Keyword(k)) => {
-                self.block_center = k == "Center extents";
-                Some(Menu)
-            }
-            (MaxPoints, Input::Text(t)) => match t.trim().parse::<usize>() {
-                Ok(n) if (2..=MAX_LEADER_POINTS).contains(&n) => {
-                    self.max_points = n;
-                    Some(Menu)
-                }
-                _ => {
-                    s.echo(format!("Requires an integer between 2 and {MAX_LEADER_POINTS}."));
-                    Some(MaxPoints)
-                }
-            },
-            (FirstAngle | SecondAngle, Input::Text(t)) => match s.angle_settings().amount(&t).filter(|a| *a >= 0.0) {
-                Some(a) => {
-                    self.angles[usize::from(o == SecondAngle)] = a;
-                    Some(Menu)
-                }
-                None => {
-                    s.echo("Requires a valid angle.");
-                    Some(o)
-                }
-            },
-            (Menu | LeaderType | Landing | ContentType | BlockAttach, Input::Text(_)) => {
-                s.echo("Invalid option keyword.");
-                Some(o)
-            }
-            (_, Input::Enter) => Some(Menu),
-            _ => Some(o),
-        }
-    }
-}
-
-impl Interactive for MLeaderM {
-    fn name(&self) -> &'static str {
-        "MLEADER"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(o) = self.opt {
-            return Self::option_prompt(o);
-        }
-        if self.wants_text() {
-            return Prompt::new("Enter leader text", Accept::TEXT);
-        }
-        if self.no_leader() && self.pts.is_empty() {
-            let what = if self.content && self.block { "Specify location of the block" } else { "Specify location of the text" };
-            return Prompt::new(what, Accept::POINT).kw(&["Options"]).default("Options");
-        }
-        let last = self.pts.len() + 1 >= self.max_points;
-        match (self.pts.last(), self.order) {
-            (None, LeaderOrder::Arrowhead) => Prompt::new("Specify leader arrowhead location", Accept::POINT)
-                .kw(&["leader Landing first", "Content first", "Options"])
-                .default("Options"),
-            (None, LeaderOrder::Landing) => Prompt::new("Specify leader landing location", Accept::POINT)
-                .kw(&["leader arrowHead first", "Content first", "Options"])
-                .default("Options"),
-            (None, LeaderOrder::Content) => Prompt::new("Specify location of the text", Accept::POINT)
-                .kw(&["leader arrowHead first", "leader Landing first", "Options"])
-                .default("Options"),
-            (Some(&b), _) if !last => Prompt::new("Specify next point", Accept::POINT).base(b),
-            (Some(&b), LeaderOrder::Arrowhead) => Prompt::new("Specify leader landing location", Accept::POINT).base(b),
-            (Some(&b), _) => Prompt::new("Specify leader arrowhead location", Accept::POINT).base(b),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(o) = self.opt {
-            self.opt = self.option(s, o, i);
-            self.remember(s);
-            return Ok(Step::Continue);
-        }
-        if self.wants_text() {
-            self.text = Some(if let Input::Text(t) = i { t } else { String::new() });
-            return if self.leader_done { self.finish(s) } else { Ok(Step::Continue) };
-        }
-        match i {
-            Input::Point(p) => {
-                let p = self.constrained(p);
-                self.pts.push(p);
-                if self.pts.len() >= self.max_points || self.no_leader() {
-                    self.leader_done = true;
-                }
-            }
-            Input::Keyword(k) if self.pts.is_empty() => {
-                match k.as_str() {
-                    "leader Landing first" => self.order = LeaderOrder::Landing,
-                    "leader arrowHead first" => self.order = LeaderOrder::Arrowhead,
-                    "Content first" => self.order = LeaderOrder::Content,
-                    _ => self.opt = Some(LeaderOpt::Menu),
-                }
-                self.remember(s);
-            }
-            Input::Enter if self.pts.is_empty() => self.opt = Some(LeaderOpt::Menu),
-            // Enter at "next point" ends the leader at the last point.
-            Input::Enter if self.pts.len() >= 2 => self.leader_done = true,
-            Input::Enter => return Ok(Step::Cancel),
-            _ => {}
-        }
-        if self.leader_done && !self.wants_text() { self.finish(s) } else { Ok(Step::Continue) }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.opt.is_some() || self.wants_text() || self.leader_done || self.pts.is_empty() {
-            return Vec::new();
-        }
-        let text = self.text.as_deref().unwrap_or("");
-        mleader_kind(s, &self.leader(Some(self.constrained(c))), text, self.landing)
-            .and_then(|k| crate::cmd::mleader_content::apply(s, k, &self.content_spec()).ok())
-            .into_iter()
-            .collect()
-    }
-}
@@ -1,100 +0,0 @@
-use super::common::{DimText, add_dim, circle_of, dim, pick_at, text_at};
-use super::{Accept, DimKind, EntityKind, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, bad, json, point_param, targets};
-
-fn radial(s: &mut Session, p: &Value, diameter: bool) -> Result<Value> {
-    let id = if diameter { "dimdiameter" } else { "dimradius" };
-    let (c, pt, at) = if let (Some(c), Some(pt)) = (point_param(p, "center"), point_param(p, "point")) {
-        (c, pt, None)
-    } else {
-        let h = targets(s, p)?.first().copied().ok_or_else(|| bad(id, "`handle` of a circle/arc, or {center, point}"))?;
-        let (c, r) = circle_of(s, h).ok_or_else(|| bad(id, "object is not a circle or arc"))?;
-        let at = point_param(p, "at");
-        let dir = at.unwrap_or(c + Vec2::from_angle(std::f64::consts::FRAC_PI_4));
-        (c, c + (dir - c).normalized() * r, at)
-    };
-    if c.near(pt, 1e-12) {
-        return Err(bad(id, "`point` must differ from `center`"));
-    }
-    let k = if diameter {
-        dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, "")
-    } else {
-        dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, "")
-    };
-    let k = match at {
-        Some(at) => text_at(k, at),
-        None => k,
-    };
-    Ok(json!({ "handle": add_dim(s, k)?.hex() }))
-}
-
-pub(super) fn run_radius(s: &mut Session, p: &Value) -> Result<Value> {
-    radial(s, p, false)
-}
-
-pub(super) fn run_diameter(s: &mut Session, p: &Value) -> Result<Value> {
-    radial(s, p, true)
-}
-
-pub(super) struct RadialM {
-    diameter: bool,
-    target: Option<(Vec2, f64)>,
-    text: DimText,
-}
-
-impl RadialM {
-    pub(super) fn new(diameter: bool) -> Self {
-        RadialM { diameter, target: None, text: DimText::default() }
-    }
-    fn kind(&self, s: &Session, c: Vec2, r: f64, at: Vec2) -> EntityKind {
-        let pt = c + (at - c).normalized() * r;
-        let k = self.text.apply(if self.diameter {
-            dim(s, DimKind::Diameter, c + (c - pt), Vec2::ZERO, Vec2::ZERO, pt, "")
-        } else {
-            dim(s, DimKind::Radius, c, Vec2::ZERO, Vec2::ZERO, pt, "")
-        });
-        text_at(k, at)
-    }
-}
-
-impl Interactive for RadialM {
-    fn name(&self) -> &'static str {
-        if self.diameter { "DIMDIAMETER" } else { "DIMRADIUS" }
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some(p) = self.text.prompt() {
-            return p;
-        }
-        match self.target {
-            None => Prompt::new("Select arc or circle", Accept::POINT),
-            Some((c, _)) => Prompt::new("Specify dimension line location", Accept::POINT).kw(&["Mtext", "Text", "Angle"]).base(c),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.text.answer(s, &i) {
-            return Ok(Step::Continue);
-        }
-        match (self.target, i) {
-            (None, Input::Point(p)) => {
-                match pick_at(s, p).and_then(|h| circle_of(s, h)) {
-                    Some(t) => self.target = Some(t),
-                    None => s.echo("Object selected is not a circle or arc."),
-                }
-                Ok(Step::Continue)
-            }
-            (Some((c, r)), Input::Point(at)) => {
-                let k = self.kind(s, c, r, at);
-                add_dim(s, k)?;
-                Ok(Step::Done)
-            }
-            (Some(_), Input::Keyword(k)) => {
-                self.text.keyword(&k);
-                Ok(Step::Continue)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.target.map(|(ctr, r)| vec![self.kind(s, ctr, r, c)]).unwrap_or_default()
-    }
-}
@@ -19,7 +19,6 @@ use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, St

 mod attedit;
 mod burst;
-mod description;
 mod dyngrip;
 mod extract;
 pub(crate) mod refedit;
@@ -29,12 +28,12 @@ pub fn specs() -> Vec<CommandSpec> {
        CommandSpec::new("block", "Make...", run_block)
            .menu(&["Draw", "Block", "Make..."])
            .alias(&["b", "bmake"])
-            .params("{name, base: [x,y], handles?, keep?: \"convert\"|\"retain\"|\"delete\" (default \"convert\"), description? (up to 255 characters, one line), annotative?}")
+            .params("{name, base: [x,y], handles?, keep?: \"convert\"|\"retain\"|\"delete\" (default \"convert\"), description?, annotative?}")
            .interactive(|_| Ok(Box::new(BlockM::default()))),
        // -BLOCK erases the selected objects once the block is defined.
        CommandSpec::new("-block", "Create Block", run_dash_block)
            .alias(&["-b"])
-            .params("{name, base: [x,y], handles?, keep?: \"delete\"|\"retain\"|\"convert\" (default \"delete\"), description? (up to 255 characters, one line)}")
+            .params("{name, base: [x,y], handles?, keep?: \"delete\"|\"retain\"|\"convert\" (default \"delete\"), description?}")
            .interactive(|_| Ok(Box::new(BlockM { dash: true, ..BlockM::default() }))),
        CommandSpec::new("insert", "Block...", run_insert)
            .menu(&["Insert", "Block..."])
@@ -80,7 +79,6 @@ pub fn specs() -> Vec<CommandSpec> {
        blockreplace::blockreplace_spec(),
        extract::dataextraction_spec(),
        extract::eattext_spec(),
-        description::description_spec(),
    ]
    .into_iter()
    .chain(attribs::attdisp_menu_specs())
@@ -268,9 +266,7 @@ fn run_block(s: &mut Session, p: &Value) -> Result<Value> {
    let base = point_param(p, "base").unwrap_or(Vec2::ZERO);
    let hs = targets(s, p)?;
    let keep = keep_param("block", p, Keep::Convert)?;
-    let description = str_param(p, "description").unwrap_or("");
-    description::check_text("block", description)?;
-    let r = make_block(s, &name, base, &hs, keep, description)?;
+    let r = make_block(s, &name, base, &hs, keep, str_param(p, "description").unwrap_or(""))?;
    // An annotative block: its references (the converted selection too) are annotative.
    if bool_or(p, "annotative", false) {
        let d = s.doc_mut()?;
@@ -85,7 +85,7 @@ pub(crate) fn refused_in_editor(s: &Session, id: &str) -> Option<String> {
 }

 /// The block a block reference refers to.
-pub(super) fn block_of(d: &Drawing, h: Handle) -> Option<String> {
+fn block_of(d: &Drawing, h: Handle) -> Option<String> {
    match d.entity(h).map(|e| &e.kind) {
        Some(EntityKind::Insert(i)) => Some(dynamic_definition(d, &i.block).unwrap_or_else(|| i.block.clone())),
        _ => None,
@@ -129,7 +129,7 @@ fn open(s: &mut Session, name: &str, create: bool) -> Result<Value> {
 }

 /// The one block reference selected, if exactly one is.
-pub(super) fn selected_reference(s: &Session) -> Option<String> {
+fn selected_reference(s: &Session) -> Option<String> {
    let d = s.doc().ok()?;
    let refs: Vec<String> = s.selection().iter().filter_map(|h| block_of(d, *h)).collect();
    match refs.as_slice() {
@@ -1,188 +0,0 @@
-//! Block Description (Modify > Object > Block Description...): changes the description of a
-//! block definition. In the Block Editor it changes the edited block's description, which BSAVE
-//! saves into the drawing as it saves the block's objects.
-
-use std::sync::Arc;
-
-use cadcraft_doc::Block;
-use serde_json::{Value, json};
-
-use super::bedit::selected_reference;
-use crate::cmd::{CommandSpec, bad, has_doc, str_param};
-use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, Step};
-
-/// The longest description a block takes, in characters.
-const MAX_LEN: usize = 255;
-
-pub(super) fn description_spec() -> CommandSpec {
-    CommandSpec::new("blocks.description", "Block Description...", run)
-        .menu(&["Modify", "Object", "Block Description..."])
-        .params("{name? (default the block the Block Editor is editing, else the one selected block reference's block), description (up to 255 characters, one line; \"\" clears it)} → {block, description}")
-        .enabled(has_doc)
-        .interactive(|_| Ok(Box::new(DescriptionM::default())))
-}
-
-/// The block the Block Editor is editing, when it is open on a block (not on the drawing itself).
-fn edited_block(s: &Session) -> Option<String> {
-    s.state().ok()?.block_editor().filter(|n| !n.eq_ignore_ascii_case(crate::blockedit::CURRENT_DRAWING)).map(str::to_string)
-}
-
-/// The block that a call without a name is about: the edited block, else the selected reference's.
-fn default_block(s: &Session) -> Option<String> {
-    edited_block(s).or_else(|| selected_reference(s))
-}
-
-/// Block `name` as the drawing spells it, when its description can be changed: while the Block
-/// Editor edits a block, only that block's. The block the editor has started and not saved yet has
-/// no definition, and is named as the editor names it.
-fn check_block(s: &Session, name: &str) -> Result<String> {
-    let name = name.trim();
-    if let Some(edited) = edited_block(s)
-        && !edited.eq_ignore_ascii_case(name)
-    {
-        return Err(bad(
-            "blocks.description",
-            format!("The Block Editor is editing \"{edited}\"; close it (BCLOSE) to change another block's description."),
-        ));
-    }
-    let d = s.doc()?;
-    match d.block(name) {
-        Some(b) if b.xref_path.is_some() => {
-            Err(bad("blocks.description", format!("\"{}\" is an external reference; its description comes from its drawing.", b.name)))
-        }
-        Some(b) if b.anonymous || b.name.starts_with('*') => {
-            Err(bad("blocks.description", format!("\"{}\" is an anonymous block made by another object; it has no description to change.", b.name)))
-        }
-        Some(b) => Ok(b.name.clone()),
-        None => match edited_block(s) {
-            Some(e) if e.eq_ignore_ascii_case(name) => Ok(e),
-            _ => Err(bad("blocks.description", format!("Block \"{name}\" not found."))),
-        },
-    }
-}
-
-/// A description a block can take (command `cmd`'s): one line of up to [`MAX_LEN`] characters.
-pub(super) fn check_text(cmd: &str, text: &str) -> Result<()> {
-    if text.contains(['\n', '\r']) {
-        return Err(bad(cmd, "the description must be one line"));
-    }
-    if text.chars().count() > MAX_LEN {
-        return Err(bad(cmd, format!("the description can be up to {MAX_LEN} characters")));
-    }
-    Ok(())
-}
-
-/// Block `name`'s definition: the drawing's, else, for the block the Block Editor edits, the one
-/// outside the editor (a block saved under a new name with BSAVEAS is not in the editor's tables).
-fn definition(s: &Session, name: &str) -> Option<Arc<Block>> {
-    let st = s.state().ok()?;
-    st.doc.block(name).or_else(|| st.block_edit.as_ref().and_then(|be| be.host.doc.block(name))).cloned()
-}
-
-/// The description of block `name` (as [`check_block`] gave it), or "" for one not yet saved.
-fn current(s: &Session, name: &str) -> String {
-    definition(s, name).map(|b| b.description.clone()).unwrap_or_default()
-}
-
-/// Give block `name` (as [`check_block`] gave it) the description `text`.
-fn set(s: &mut Session, name: &str, text: &str) -> Result<Value> {
-    check_text("blocks.description", text)?;
-    let outside = definition(s, name);
-    let doc = s.doc_mut()?;
-    match doc.blocks.iter_mut().find(|(k, _)| k.eq_ignore_ascii_case(name)) {
-        Some((_, b)) => {
-            if b.description != text {
-                Arc::make_mut(b).description = text.to_string();
-            }
-        }
-        // The block the Block Editor edits and the editor's tables don't hold (one it started, or
-        // one BSAVEAS made): BSAVE saves it with this description.
-        None => {
-            let mut b = outside.map(|b| (*b).clone()).unwrap_or_else(|| Block::new(name));
-            b.description = text.to_string();
-            doc.blocks.insert(name.to_string(), Arc::new(b));
-        }
-    }
-    if s.state()?.block_editor().is_some() {
-        s.echo(format!("Description of block \"{name}\" changed; BSAVE saves it into the drawing."));
-    } else {
-        s.echo(format!("Description of block \"{name}\" changed."));
-    }
-    Ok(json!({ "block": name, "description": text }))
-}
-
-fn run(s: &mut Session, p: &Value) -> Result<Value> {
-    let name = match str_param(p, "name") {
-        Some(n) => n.to_string(),
-        None => default_block(s)
-            .ok_or_else(|| bad("blocks.description", "`name` is required (or open the block in the Block Editor, or select one block reference)"))?,
-    };
-    let text = str_param(p, "description").ok_or_else(|| bad("blocks.description", "`description` is required"))?;
-    let name = check_block(s, &name)?;
-    set(s, &name, text)
-}
-
-// ---------------- interactive ----------------
-
-/// Block Description: the block (the edited one, the selected reference's, or a name typed or a
-/// reference picked), then its new description; Enter keeps the description it has.
-#[derive(Default)]
-struct DescriptionM {
-    /// The block whose description is asked for, once known.
-    block: Option<String>,
-}
-
-impl Interactive for DescriptionM {
-    fn name(&self) -> &'static str {
-        "BLOCKS.DESCRIPTION"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        if let Some(name) = default_block(s) {
-            self.block = Some(check_block(s, &name)?);
-        }
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        match &self.block {
-            Some(name) => {
-                let cur = current(s, name);
-                let p = Prompt::new(format!("Enter description for block \"{name}\""), Accept::TEXT);
-                if cur.is_empty() { p } else { p.default(cur) }
-            }
-            None => Prompt::new(
-                "Enter block name or select a block reference",
-                Accept { point: true, number: false, text: true, select: true, enter: true },
-            ),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(name) = self.block.clone() {
-            return match i {
-                Input::Text(t) => set(s, &name, t.trim()).map(|_| Step::Done),
-                Input::Enter => Ok(Step::Done),
-                _ => Ok(Step::Continue),
-            };
-        }
-        match i {
-            Input::Text(t) | Input::Keyword(t) => {
-                self.block = Some(check_block(s, &t)?);
-                Ok(Step::Continue)
-            }
-            Input::Pick(hs) => {
-                let picked = {
-                    let d = s.doc()?;
-                    hs.iter().find_map(|h| super::bedit::block_of(d, *h))
-                };
-                match picked {
-                    Some(n) => {
-                        self.block = Some(check_block(s, &n)?);
-                        Ok(Step::Continue)
-                    }
-                    None => Err(EngineError::Other("Select a block reference.".into())),
-                }
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-}
@@ -1200,4 +1200,5 @@ pub fn after_command(s: &mut Session, before: Option<&Arc<Drawing>>, ok: bool) {
 }

 #[cfg(test)]
+#[path = "constraints_tests.rs"]
 mod tests;
@@ -1,181 +0,0 @@
-use super::{
-    Accept, Arc, Circle, EntityKind, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, added, arc, bad, circle, f64_req, line, number,
-    point_param, size_param,
-};
-
-pub(super) fn run_circle(s: &mut Session, p: &Value) -> Result<Value> {
-    let c = if let Some(center) = point_param(p, "center") {
-        // Checked before `Circle::new`, which would turn a negative radius positive.
-        let r = match size_param("circle", p, "radius", false)? {
-            Some(r) => r,
-            None => size_param("circle", p, "diameter", false)?.ok_or_else(|| bad("circle", "`radius` or `diameter` is required"))? / 2.0,
-        };
-        Circle::new(center, r)
-    } else if let (Some(a), Some(b)) = (point_param(p, "p1"), point_param(p, "p2")) {
-        match point_param(p, "p3") {
-            Some(c3) => Circle::from_3_points(a, b, c3).ok_or_else(|| bad("circle", "points are collinear"))?,
-            None => Circle::from_2_points(a, b),
-        }
-    } else {
-        return Err(bad("circle", "give {center, radius} or {p1, p2[, p3]}"));
-    };
-    if !(c.radius > 1e-12 && c.radius.is_finite()) {
-        return Err(bad("circle", "radius must be positive"));
-    }
-    added(s.add_entity(circle(c.center, c.radius))?)
-}
-
-pub(super) fn run_arc(s: &mut Session, p: &Value) -> Result<Value> {
-    let a = if let (Some(a), Some(b), Some(c)) = (point_param(p, "p1"), point_param(p, "p2"), point_param(p, "p3")) {
-        Arc::from_3_points(a, b, c).ok_or_else(|| bad("arc", "points are collinear"))?
-    } else if let (Some(st), Some(c), Some(e)) = (point_param(p, "start"), point_param(p, "center"), point_param(p, "end")) {
-        Arc::from_start_center_end(st, c, e)
-    } else if let Some(c) = point_param(p, "center") {
-        let r = f64_req("arc", p, "radius")?;
-        // Checked before `Arc::new`, which would turn a negative radius positive (zero is
-        // refused below).
-        if r < 0.0 {
-            return Err(bad("arc", "`radius` must be positive"));
-        }
-        Arc::new(c, r, f64_req("arc", p, "start")?.to_radians(), f64_req("arc", p, "end")?.to_radians())
-    } else {
-        return Err(bad("arc", "give {p1,p2,p3}, {start,center,end} or {center,radius,start,end}"));
-    };
-    // Zero or non-finite radius (e.g. start == center): refuse, like the interactive ARC and the
-    // arc.* variants, before anything is added (#85).
-    let a = crate::cmd::curves::finite_arc(a).ok_or_else(|| bad("arc", "these values do not define an arc"))?;
-    added(s.add_entity(arc(&a))?)
-}
-
-#[derive(Default)]
-pub(super) struct CircleM {
-    mode: u8, // 0 center-radius, 1 = 3P, 2 = 2P, 3 = TTR
-    pts: Vec<Vec2>,
-    diameter: bool,
-    /// The `Ttr` option hands over to the tangent-circle machine.
-    delegate: Option<Box<dyn Interactive>>,
-}
-
-impl Interactive for CircleM {
-    fn name(&self) -> &'static str {
-        "CIRCLE"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        if let Some(d) = &self.delegate {
-            return d.prompt(s);
-        }
-        let n = self.pts.len();
-        let last_r = s.doc().map(|d| d.header.f64("CIRCLERAD", 0.0)).unwrap_or(0.0);
-        match (self.mode, n) {
-            (0, 0) => Prompt::new("Specify center point for circle", Accept::POINT).kw(&["3P", "2P", "Ttr (tan tan radius)"]),
-            (0, _) if self.diameter => {
-                Prompt::new("Specify diameter of circle", Accept::POINT_OR_NUMBER).base_opt(self.pts.first().copied()).distance()
-            }
-            (0, _) => {
-                let p =
-                    Prompt::new("Specify radius of circle", Accept::POINT_OR_NUMBER).kw(&["Diameter"]).base_opt(self.pts.first().copied()).distance();
-                if last_r > 0.0 { p.default(format!("{last_r:.4}")) } else { p }
-            }
-            (1, k) => Prompt::new(
-                ["Specify first point on circle", "Specify second point on circle", "Specify third point on circle"].get(k).copied().unwrap_or(""),
-                Accept::POINT,
-            )
-            .base_opt(self.pts.last().copied()),
-            (2, k) => Prompt::new(
-                if k == 0 { "Specify first end point of circle's diameter" } else { "Specify second end point of circle's diameter" },
-                Accept::POINT,
-            )
-            .base_opt(self.pts.last().copied()),
-            _ => Prompt::new("Specify center point for circle", Accept::POINT),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(d) = &mut self.delegate {
-            return d.input(s, i);
-        }
-        match i {
-            Input::Keyword(k) => {
-                self.mode = match k.as_str() {
-                    "3P" => 1,
-                    "2P" => 2,
-                    "Diameter" => {
-                        self.diameter = true;
-                        self.mode
-                    }
-                    _ => {
-                        self.delegate = Some(Box::new(crate::cmd::draw2::TanCircleM::new(true)));
-                        3
-                    }
-                };
-                Ok(Step::Continue)
-            }
-            Input::Point(p) => {
-                if self.mode == 0 && self.pts.first().is_some_and(|c| c.near(p, 1e-12)) {
-                    return Err(crate::EngineError::Other("Value must be positive and nonzero.".into()));
-                }
-                self.pts.push(p);
-                let done = match self.mode {
-                    0 if self.pts.len() == 2 => {
-                        let (Some(c), Some(e)) = (self.pts.first(), self.pts.get(1)) else { return Ok(Step::Continue) };
-                        let r = if self.diameter { c.dist(*e) / 2.0 } else { c.dist(*e) };
-                        Some(Circle::new(*c, r))
-                    }
-                    1 if self.pts.len() == 3 => Circle::from_3_points(self.pts[0], self.pts[1], self.pts[2]),
-                    2 if self.pts.len() == 2 => Some(Circle::from_2_points(self.pts[0], self.pts[1])),
-                    _ => None,
-                };
-                if let Some(c) = done {
-                    finish_circle(s, c)?;
-                    return Ok(Step::Done);
-                }
-                Ok(Step::Continue)
-            }
-            Input::Text(t) if self.mode == 0 && self.pts.len() == 1 => {
-                let v = number(&t).ok_or_else(|| crate::EngineError::Other("Requires numeric distance or second point.".into()))?;
-                let r = if self.diameter { v / 2.0 } else { v };
-                if r <= 0.0 {
-                    return Err(crate::EngineError::Other("Value must be positive and nonzero.".into()));
-                }
-                finish_circle(s, Circle::new(self.pts[0], r))?;
-                Ok(Step::Done)
-            }
-            Input::Enter if self.mode == 0 && self.pts.len() == 1 => {
-                let r = s.doc()?.header.f64("CIRCLERAD", 0.0);
-                if r > 0.0 {
-                    finish_circle(s, Circle::new(self.pts[0], r))?;
-                    Ok(Step::Done)
-                } else {
-                    Ok(Step::Continue)
-                }
-            }
-            Input::Enter => Ok(Step::Cancel),
-            // Garbage at a point prompt: report it and ask again.
-            Input::Text(_) if self.mode == 0 && self.pts.is_empty() => Err(crate::EngineError::Other("Point or option keyword required.".into())),
-            Input::Text(_) => Err(crate::EngineError::Other("Invalid point.".into())),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if let Some(d) = &self.delegate {
-            return d.preview(s, c);
-        }
-        match (self.mode, self.pts.as_slice()) {
-            (0, [center]) => {
-                let r = if self.diameter { center.dist(c) / 2.0 } else { center.dist(c) };
-                vec![circle(*center, r), line(*center, c)]
-            }
-            (1, [a, b]) => Circle::from_3_points(*a, *b, c).map(|ci| vec![circle(ci.center, ci.radius)]).unwrap_or_default(),
-            (1, [a]) | (2, [a]) => {
-                let ci = Circle::from_2_points(*a, c);
-                vec![circle(ci.center, ci.radius)]
-            }
-            _ => Vec::new(),
-        }
-    }
-}
-
-fn finish_circle(s: &mut Session, c: Circle) -> Result<()> {
-    s.add_entity(circle(c.center, c.radius))?;
-    s.doc_mut()?.header.set_f64("CIRCLERAD", c.radius);
-    Ok(())
-}
@@ -1,217 +0,0 @@
-use super::{
-    Accept, Ellipse, EntityKind, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, added, bad, f64_or, f64_req, line, number,
-    point_req, v3,
-};
-
-pub(super) fn run_ellipse(s: &mut Session, p: &Value) -> Result<Value> {
-    if p.get("isocircle").is_some() {
-        return crate::cmd::settings::iso::run_isocircle(s, p);
-    }
-    let c = point_req("ellipse", p, "center")?;
-    let m = point_req("ellipse", p, "major")?;
-    let ratio = f64_req("ellipse", p, "ratio")?;
-    if !(ratio > 0.0 && ratio <= 1.0) || m.len() < 1e-12 {
-        return Err(bad("ellipse", "ratio must be in (0, 1] and major non-zero"));
-    }
-    let start = f64_or(p, "start", 0.0).to_radians();
-    let end = f64_or(p, "end", 360.0).to_radians();
-    added(s.add_entity(EntityKind::Ellipse(cadcraft_doc::Ellipse { center: v3(c), major: v3(m), ratio, start, end }))?)
-}
-
-/// ELLIPSE prompt machine starting in axis-end or center mode, optionally for an elliptical arc.
-pub(crate) fn ellipse_machine(center: bool, arc: bool) -> Box<dyn Interactive> {
-    Box::new(EllipseM { center_mode: center, arc_mode: arc, ..Default::default() })
-}
-
-#[derive(Default)]
-pub(super) struct EllipseM {
-    center_mode: bool,
-    arc_mode: bool,
-    pts: Vec<Vec2>,
-    /// The `Rotation` option: the next value is the rotation around the major axis.
-    rotation: bool,
-    ellipse: Option<Ellipse>,
-    /// The `Parameter` option: arc start/end values are ellipse parameters, not true angles.
-    param: bool,
-    start: Option<f64>,
-    /// The Isocircle option (isometric snap style) in progress.
-    iso: Option<crate::cmd::settings::iso::IsoCircle>,
-}
-
-impl EllipseM {
-    fn axis(&self) -> Option<(Vec2, Vec2)> {
-        // (center, major vector)
-        match (self.center_mode, self.pts.as_slice()) {
-            (true, [c, e, ..]) => Some((*c, *e - *c)),
-            (false, [a, b, ..]) => Some((a.mid(*b), *b - a.mid(*b))),
-            _ => None,
-        }
-    }
-    fn build(&self, other: Vec2) -> Option<Ellipse> {
-        let (c, m) = self.axis()?;
-        let ml = m.len();
-        if ml < 1e-12 {
-            return None;
-        }
-        let u = m / ml;
-        let minor = ((other - c).dot(u.perp())).abs();
-        let (major, ratio) = if minor > ml { (u.perp() * minor, ml / minor) } else { (m, minor / ml) };
-        (ratio > 1e-9).then_some(Ellipse::full(c, major, ratio.min(1.0)))
-    }
-    /// The ellipse seen as a circle on the first axis rotated by `a` around it: ratio = cos(a),
-    /// for rotations up to 89.4°.
-    fn rotated(&self, a: f64) -> Option<Ellipse> {
-        let (c, m) = self.axis()?;
-        let ratio = a.cos().abs();
-        (m.len() >= 1e-12 && ratio >= 89.4f64.to_radians().cos()).then_some(Ellipse::full(c, m, ratio.min(1.0)))
-    }
-    /// The full ellipse is known: draw it, or go on to the arc angles.
-    fn place(&mut self, s: &mut Session, e: Ellipse) -> Result<Step> {
-        if self.arc_mode {
-            self.ellipse = Some(e);
-            return Ok(Step::Continue);
-        }
-        s.add_entity(EntityKind::Ellipse(cadcraft_doc::Ellipse {
-            center: v3(e.center),
-            major: v3(e.major),
-            ratio: e.ratio,
-            start: 0.0,
-            end: cadcraft_geom::TAU,
-        }))?;
-        Ok(Step::Done)
-    }
-}
-
-impl Interactive for EllipseM {
-    fn name(&self) -> &'static str {
-        "ELLIPSE"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        if let Some(e) = &self.ellipse {
-            let msg = match (self.start.is_none(), self.param) {
-                (true, false) => "Specify start angle",
-                (false, false) => "Specify end angle",
-                (true, true) => "Specify start parameter",
-                (false, true) => "Specify end parameter",
-            };
-            return Prompt::new(msg, Accept::POINT_OR_NUMBER).kw(if self.param { &["Angle"] } else { &["Parameter"] }).base(e.center);
-        }
-        if let Some(iso) = &self.iso {
-            return iso.prompt();
-        }
-        match (self.center_mode, self.pts.len()) {
-            (false, 0) if s.settings.isodraft => Prompt::new("Specify axis endpoint of ellipse", Accept::POINT).kw(&["Arc", "Center", "Isocircle"]),
-            (false, 0) => Prompt::new("Specify axis endpoint of ellipse", Accept::POINT).kw(&["Arc", "Center"]),
-            (false, 1) => Prompt::new("Specify other endpoint of axis", Accept::POINT).base_opt(self.pts.first().copied()),
-            (true, 0) => Prompt::new("Specify center of ellipse", Accept::POINT),
-            (true, 1) => Prompt::new("Specify endpoint of axis", Accept::POINT).base_opt(self.pts.first().copied()),
-            _ if self.rotation => Prompt::new("Specify rotation around major axis", Accept::POINT_OR_NUMBER).base_opt(self.axis().map(|a| a.0)),
-            _ => Prompt::new("Specify distance to other axis", Accept::POINT_OR_NUMBER).kw(&["Rotation"]).base_opt(self.axis().map(|a| a.0)),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(e) = self.ellipse {
-            let ge = Ellipse { start: 0.0, end: cadcraft_geom::TAU, ..e };
-            let ang = match i {
-                Input::Keyword(k) => {
-                    match k.as_str() {
-                        "Parameter" => self.param = true,
-                        "Angle" => self.param = false,
-                        _ => {}
-                    }
-                    return Ok(Step::Continue);
-                }
-                // A parameter is the angle from the major axis taken as the parameter itself.
-                Input::Point(p) if self.param => cadcraft_geom::norm_angle((p - e.center).angle() - e.major.angle()),
-                Input::Point(p) => ge.param_of(p),
-                Input::Text(t) => {
-                    let a = s.angle_settings().amount(&t).ok_or_else(|| crate::EngineError::Other("Requires an angle.".into()))?;
-                    if self.param {
-                        cadcraft_geom::norm_angle(a)
-                    } else {
-                        // A typed angle is a true angle from the major axis; convert it to an ellipse parameter like a picked point.
-                        ge.param_of(e.center + Vec2::from_angle(a + e.major.angle()))
-                    }
-                }
-                _ => return Ok(Step::Continue),
-            };
-            match self.start {
-                None => {
-                    self.start = Some(ang);
-                    return Ok(Step::Continue);
-                }
-                Some(st) => {
-                    s.add_entity(EntityKind::Ellipse(cadcraft_doc::Ellipse {
-                        center: v3(e.center),
-                        major: v3(e.major),
-                        ratio: e.ratio,
-                        start: st,
-                        end: ang,
-                    }))?;
-                    return Ok(Step::Done);
-                }
-            }
-        }
-        if let Some(iso) = &mut self.iso {
-            return match iso.input(s, i)? {
-                Some(e) => self.place(s, e),
-                None => Ok(Step::Continue),
-            };
-        }
-        match i {
-            Input::Keyword(k) if k == "Isocircle" && self.pts.is_empty() => self.iso = Some(Default::default()),
-            Input::Keyword(k) if k == "Center" => self.center_mode = true,
-            Input::Keyword(k) if k == "Arc" => self.arc_mode = true,
-            Input::Keyword(k) if k == "Rotation" && self.pts.len() == 2 => self.rotation = true,
-            Input::Point(p) if self.pts.len() < 2 => self.pts.push(p),
-            Input::Point(p) if self.rotation => {
-                if let Some(e) = self.axis().and_then(|(c, _)| self.rotated((p - c).angle())) {
-                    return self.place(s, e);
-                }
-            }
-            Input::Point(p) => {
-                if let Some(e) = self.build(p) {
-                    return self.place(s, e);
-                }
-            }
-            Input::Text(t) if self.pts.len() == 2 && self.rotation => {
-                let e = s
-                    .angle_settings()
-                    .amount(&t)
-                    .and_then(|a| self.rotated(a))
-                    .ok_or_else(|| crate::EngineError::Other("Requires an angle between 0 and 89.4 degrees.".into()))?;
-                return self.place(s, e);
-            }
-            Input::Text(t) if self.pts.len() == 2 => {
-                let d = number(&t).ok_or_else(|| crate::EngineError::Other("Requires a distance.".into()))?;
-                if let Some((c, m)) = self.axis()
-                    && let Some(e) = self.build(c + m.normalized().perp() * d)
-                {
-                    return self.place(s, e);
-                }
-            }
-            Input::Enter => return Ok(Step::Cancel),
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if let Some(iso) = &self.iso {
-            return iso.preview(s, c).map(|e| crate::cmd::settings::iso::ellipse_entity(&e)).into_iter().collect();
-        }
-        if self.pts.len() < 2 {
-            return self.pts.first().map(|a| vec![line(*a, c)]).unwrap_or_default();
-        }
-        let e = if self.rotation { self.axis().and_then(|(ctr, _)| self.rotated((c - ctr).angle())) } else { self.build(c) };
-        e.map(|e| {
-            vec![EntityKind::Ellipse(cadcraft_doc::Ellipse {
-                center: v3(e.center),
-                major: v3(e.major),
-                ratio: e.ratio,
-                start: 0.0,
-                end: cadcraft_geom::TAU,
-            })]
-        })
-        .unwrap_or_default()
-    }
-}
@@ -1,406 +0,0 @@
-use super::{
-    Accept, EntityKind, Input, Interactive, Outcome, PlineAsk, PolyVertex, Prompt, Result, Session, Step, Value, Vec2, added, arc_to_bulge, bad,
-    bool_or, bulge_to_arc, distinct_points, f64_or, json, line, lwpoly, number, point_value, points_param, size_param, snap,
-};
-
-// ---------------- JSON forms ----------------
-
-pub(super) fn run_line(s: &mut Session, p: &Value) -> Result<Value> {
-    let pts = points_param(p, "points").ok_or_else(|| bad("line", "`points` [[x,y],...] (2 or more) is required"))?;
-    if pts.len() < 2 {
-        return Err(bad("line", "need at least 2 points"));
-    }
-    // A repeated point would make a zero-length line.
-    let pts = distinct_points(&pts);
-    if pts.len() < 2 {
-        return Err(bad("line", "need at least 2 different points"));
-    }
-    let mut hs = Vec::new();
-    for w in pts.windows(2) {
-        if let [a, b] = w {
-            hs.push(s.add_entity(line(*a, *b))?.hex());
-        }
-    }
-    if bool_or(p, "closed", false)
-        && pts.len() > 2
-        && let (Some(a), Some(b)) = (pts.last(), pts.first())
-        && !a.near(*b, 1e-12)
-    {
-        hs.push(s.add_entity(line(*a, *b))?.hex());
-    }
-    Ok(json!({ "handles": hs }))
-}
-
-fn vertex_value(v: &Value) -> Option<PolyVertex> {
-    if let Some(p) = point_value(v) {
-        return Some(PolyVertex::new(p));
-    }
-    let p = point_value(v.get("p")?)?;
-    Some(PolyVertex { p, bulge: f64_or(v, "bulge", 0.0), start_width: f64_or(v, "startWidth", 0.0), end_width: f64_or(v, "endWidth", 0.0) })
-}
-
-pub(super) fn run_pline(s: &mut Session, p: &Value) -> Result<Value> {
-    let raw = p.get("vertices").or_else(|| p.get("points")).and_then(Value::as_array);
-    for v in raw.into_iter().flatten() {
-        size_param("pline", v, "startWidth", true)?;
-        size_param("pline", v, "endWidth", true)?;
-    }
-    let vs: Vec<PolyVertex> = raw.map(|a| a.iter().filter_map(vertex_value).collect()).unwrap_or_default();
-    if vs.len() < 2 {
-        return Err(bad("pline", "`vertices` needs at least 2 points"));
-    }
-    let width = size_param("pline", p, "width", true)?.unwrap_or(0.0);
-    let mut k = lwpoly(vs, bool_or(p, "closed", false));
-    if let EntityKind::LwPolyline(pl) = &mut k {
-        pl.const_width = width;
-    }
-    added(s.add_entity(k)?)
-}
-
-// ---------------- interactive ----------------
-
-#[derive(Default)]
-pub(super) struct LineM {
-    pts: Vec<Vec2>,
-    handles: Vec<cadcraft_doc::Handle>,
-    /// A first point picked as a deferred tangent/perpendicular, resolved by the next point.
-    first: Option<snap::Deferred>,
-}
-
-impl LineM {
-    /// Draw the first segment from the deferred first point to `end`.
-    fn resolve_first(&mut self, s: &mut Session, first: snap::Deferred, end: snap::LineEnd) -> Result<Step> {
-        let Some((a, b)) = snap::resolve_deferred(snap::LineEnd::Deferred(first), end) else {
-            let what = if first.mode == snap::mode::TAN { "tangent" } else { "perpendicular" };
-            return Err(crate::EngineError::Other(format!("No {what} line through that point; pick another point.")));
-        };
-        self.handles.push(s.add_entity(line(a, b))?);
-        self.pts = vec![a, b];
-        self.first = None;
-        s.last_point = b;
-        Ok(Step::Continue)
-    }
-}
-
-impl Interactive for LineM {
-    fn name(&self) -> &'static str {
-        "LINE"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match self.pts.len() {
-            0 if self.first.is_some() => Prompt::new("Specify next point", Accept::POINT).kw(&["Undo"]).deferred(),
-            0 => Prompt::new("Specify first point", Accept::POINT).deferred(),
-            1 | 2 => Prompt::new("Specify next point", Accept::POINT).kw(&["Undo"]).base_opt(self.pts.last().copied()),
-            _ => Prompt::new("Specify next point", Accept::POINT).kw(&["Close", "Undo"]).base_opt(self.pts.last().copied()),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.pts.is_empty()
-            && let Some(first) = self.first
-        {
-            match i {
-                Input::Point(p) => {
-                    // A deferred TAN first point with a typed `@d<a` next point: resolve
-                    // exactly from the direction and distance the user gave.
-                    if let Some((dist, ang)) = s.last_polar.take()
-                        && let Some(t) = snap::tangent_point_in_direction(&first.curve, ang, first.at)
-                    {
-                        let e = t + Vec2::new(ang.cos(), ang.sin()) * dist;
-                        self.handles.push(s.add_entity(line(t, e))?);
-                        self.pts = vec![t, e];
-                        s.last_point = e;
-                        self.first = None;
-                        return Ok(Step::Continue);
-                    }
-                    return self.resolve_first(s, first, snap::LineEnd::Point(p));
-                }
-                Input::Deferred(d) => return self.resolve_first(s, first, snap::LineEnd::Deferred(d)),
-                _ => {}
-            }
-        }
-        match i {
-            Input::Deferred(d) if self.pts.is_empty() => {
-                self.first = Some(d);
-                Ok(Step::Continue)
-            }
-            // A deferred pick with a known last point (not offered by the prompt, but harmless).
-            Input::Deferred(d) => match self.pts.last().copied() {
-                Some(last) => match snap::resolve_deferred(snap::LineEnd::Point(last), snap::LineEnd::Deferred(d)) {
-                    Some((_, p)) => self.input(s, Input::Point(p)),
-                    None => Err(crate::EngineError::Other("No tangent or perpendicular from the last point.".into())),
-                },
-                None => Ok(Step::Continue),
-            },
-            Input::Point(p) => {
-                if let Some(last) = self.pts.last().copied() {
-                    if last.near(p, 1e-12) {
-                        return Ok(Step::Continue);
-                    }
-                    self.handles.push(s.add_entity(line(last, p))?);
-                }
-                self.pts.push(p);
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Undo" => {
-                if self.first.take().is_some() {
-                    return Ok(Step::Continue);
-                }
-                if let Some(h) = self.handles.pop() {
-                    s.doc_mut()?.remove_entity(h);
-                }
-                self.pts.pop();
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Close" => {
-                if let (Some(a), Some(b)) = (self.pts.last().copied(), self.pts.first().copied()) {
-                    s.add_entity(line(a, b))?;
-                }
-                Ok(Step::Done)
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Err(crate::EngineError::Other("Point or option keyword required.".into())),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if let Some(first) = self.first {
-            // Over a second curve, show the tangent-to-tangent line the click would draw.
-            let end = s.cursor_deferred.map_or(snap::LineEnd::Point(c), snap::LineEnd::Deferred);
-            return snap::resolve_deferred(snap::LineEnd::Deferred(first), end).map(|(a, b)| vec![line(a, b)]).unwrap_or_default();
-        }
-        self.pts.last().map(|l| vec![line(*l, c)]).unwrap_or_default()
-    }
-}
-
-#[derive(Default)]
-pub(super) struct PlineM {
-    verts: Vec<PolyVertex>,
-    arc_mode: bool,
-    /// Total width at the start and end of the next segment (Width / Halfwidth answers).
-    start_w: f64,
-    end_w: f64,
-    handle: Option<cadcraft_doc::Handle>,
-    /// 1 = asking the starting width, 2 = the ending width.
-    asking_width: u8,
-    /// The widths are being asked as half-widths (centre line to edge).
-    half: bool,
-    /// An option asking further questions (arc mode's Angle, CEnter…, line mode's Length).
-    ask: Option<PlineAsk>,
-}
-
-impl PlineM {
-    fn entity(&self, closed: bool) -> EntityKind {
-        let mut k = lwpoly(self.verts.clone(), closed);
-        if let EntityKind::LwPolyline(pl) = &mut k {
-            // Every segment the same uniform width: store it as the constant width, as before.
-            let segs = if closed { pl.vertices.len() } else { pl.vertices.len().saturating_sub(1) };
-            let w = pl.vertices.first().map_or(0.0, |v| v.start_width);
-            if pl.vertices.iter().take(segs).all(|v| v.start_width == w && v.end_width == w) {
-                pl.const_width = w;
-                for v in &mut pl.vertices {
-                    (v.start_width, v.end_width) = (0.0, 0.0);
-                }
-            }
-        }
-        k
-    }
-    /// The next segment, starting at the last vertex, takes the requested widths (#104); the
-    /// segments after it are uniform at the ending width, as in AutoCAD.
-    fn begin_segment(&mut self) {
-        if let Some(last) = self.verts.last_mut() {
-            (last.start_width, last.end_width) = (self.start_w, self.end_w);
-            self.start_w = self.end_w;
-        }
-    }
-    fn sync(&mut self, s: &mut Session, closed: bool) -> Result<()> {
-        if self.verts.len() < 2 {
-            if let Some(h) = self.handle.take() {
-                s.doc_mut()?.remove_entity(h);
-            }
-            return Ok(());
-        }
-        let k = self.entity(closed);
-        match self.handle {
-            Some(h) => {
-                s.doc_mut()?.modify_entity(h, |e| e.kind = k)?;
-            }
-            None => self.handle = Some(s.add_entity(k)?),
-        }
-        Ok(())
-    }
-    /// The direction the polyline runs in at its last vertex (+X before the second vertex).
-    fn tangent(&self) -> Vec2 {
-        let n = self.verts.len();
-        let Some(last) = self.verts.last() else { return Vec2::X };
-        if n >= 2 {
-            let prev = self.verts.get(n - 2).copied().unwrap_or_default();
-            match bulge_to_arc(prev.p, last.p, prev.bulge) {
-                Some((a, ccw)) => {
-                    let r = (last.p - a.center).perp().normalized();
-                    if ccw { r } else { -r }
-                }
-                None => (last.p - prev.p).normalized(),
-            }
-        } else {
-            Vec2::X
-        }
-    }
-    /// Bulge for a tangent-continuing arc from the last vertex to `p`.
-    fn tangent_bulge(&self, p: Vec2) -> f64 {
-        let Some(last) = self.verts.last() else { return 0.0 };
-        let dir = self.tangent();
-        let chord = p - last.p;
-        // Included angle = 2 × angle between tangent and chord.
-        let ang = dir.cross(chord).atan2(dir.dot(chord));
-        arc_to_bulge(2.0 * ang)
-    }
-}
-
-impl Interactive for PlineM {
-    fn name(&self) -> &'static str {
-        "PLINE"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        if self.asking_width > 0 {
-            let unit = if self.half { "half-width" } else { "width" };
-            let (which, w) = if self.asking_width == 1 { ("starting", self.start_w) } else { ("ending", self.end_w) };
-            let shown = if self.half { w / 2.0 } else { w };
-            return Prompt::new(format!("Specify {which} {unit}"), Accept::NUMBER).default(format!("{shown:.4}"));
-        }
-        let base = self.verts.last().map(|v| v.p);
-        if let (Some(a), Some(st)) = (self.ask, base) {
-            return a.prompt(st, self.tangent(), s);
-        }
-        match (self.verts.len(), self.arc_mode) {
-            (0, _) => Prompt::new("Specify start point", Accept::POINT),
-            (n, false) => {
-                let mut kw = vec!["Arc", "Halfwidth", "Length", "Undo", "Width"];
-                if n >= 2 {
-                    kw.insert(1, "Close");
-                }
-                Prompt::new("Specify next point", Accept::POINT).kw(&kw).base_opt(base)
-            }
-            (_, true) => Prompt::new("Specify endpoint of arc", Accept::POINT)
-                .kw(&["Angle", "CEnter", "CLose", "Direction", "Halfwidth", "Line", "Radius", "Second pt", "Undo", "Width"])
-                .base_opt(base),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.asking_width > 0 {
-            match i {
-                Input::Text(t) => {
-                    let w = number(&t).filter(|w| w.is_finite()).ok_or_else(|| crate::EngineError::Other("Requires a distance.".into()))?;
-                    // Halfwidth is centre line to edge: the total width is twice the answer (#83).
-                    let w = w.max(0.0) * if self.half { 2.0 } else { 1.0 };
-                    if self.asking_width == 1 {
-                        self.start_w = w;
-                    } else {
-                        self.end_w = w;
-                    }
-                }
-                Input::Enter => {}
-                _ => return Ok(Step::Continue),
-            }
-            if self.asking_width == 1 {
-                // The ending width defaults to the starting width.
-                self.end_w = self.start_w;
-            }
-            self.asking_width = if self.asking_width == 1 { 2 } else { 0 };
-            return Ok(Step::Continue);
-        }
-        if let (Some(a), Some(st)) = (self.ask, self.verts.last().map(|v| v.p)) {
-            match a.input(s, i, st, self.tangent())? {
-                Outcome::Ask(next) => self.ask = Some(next),
-                Outcome::Back => self.ask = None,
-                Outcome::Segment(end, bulge) => {
-                    self.ask = None;
-                    self.begin_segment();
-                    if let Some(last) = self.verts.last_mut() {
-                        last.bulge = bulge;
-                    }
-                    self.verts.push(PolyVertex::new(end));
-                    self.sync(s, false)?;
-                }
-            }
-            return Ok(Step::Continue);
-        }
-        match i {
-            Input::Point(p) => {
-                if self.verts.is_empty() {
-                    s.echo(format!("Current line-width is {:.4}", self.start_w));
-                }
-                self.begin_segment();
-                if self.arc_mode && !self.verts.is_empty() {
-                    let b = self.tangent_bulge(p);
-                    if let Some(last) = self.verts.last_mut() {
-                        last.bulge = b;
-                    }
-                }
-                self.verts.push(PolyVertex::new(p));
-                self.sync(s, false)?;
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) => match k.as_str() {
-                "Arc" => {
-                    self.arc_mode = true;
-                    Ok(Step::Continue)
-                }
-                "Line" => {
-                    self.arc_mode = false;
-                    Ok(Step::Continue)
-                }
-                "Close" | "CLose" => {
-                    if self.arc_mode
-                        && let Some(first) = self.verts.first().map(|v| v.p)
-                    {
-                        let b = self.tangent_bulge(first);
-                        if let Some(last) = self.verts.last_mut() {
-                            last.bulge = b;
-                        }
-                    }
-                    // The closing segment starts at the last vertex.
-                    self.begin_segment();
-                    self.sync(s, true)?;
-                    Ok(Step::Done)
-                }
-                "Undo" => {
-                    self.verts.pop();
-                    if let Some(l) = self.verts.last_mut() {
-                        l.bulge = 0.0;
-                        (l.start_width, l.end_width) = (0.0, 0.0);
-                    }
-                    self.sync(s, false)?;
-                    Ok(Step::Continue)
-                }
-                "Width" | "Halfwidth" => {
-                    self.half = k == "Halfwidth";
-                    self.asking_width = 1;
-                    Ok(Step::Continue)
-                }
-                k => {
-                    match PlineAsk::from_keyword(k, self.arc_mode) {
-                        Some(a) if !self.verts.is_empty() => self.ask = Some(a),
-                        _ => return Err(crate::EngineError::Other("Point or option keyword required.".into())),
-                    }
-                    Ok(Step::Continue)
-                }
-            },
-            Input::Enter => Ok(Step::Done),
-            _ => Err(crate::EngineError::Other("Point or option keyword required.".into())),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        let Some(last) = self.verts.last() else { return Vec::new() };
-        if let Some(a) = self.ask {
-            return a
-                .preview(last.p, self.tangent(), c)
-                .map(|(e, b)| vec![lwpoly(vec![PolyVertex::with_bulge(last.p, b), PolyVertex::new(e)], false)])
-                .unwrap_or_default();
-        }
-        if self.arc_mode {
-            let b = self.tangent_bulge(c);
-            vec![lwpoly(vec![PolyVertex::with_bulge(last.p, b), PolyVertex::new(c)], false)]
-        } else {
-            vec![line(last.p, c)]
-        }
-    }
-}
@@ -1,168 +0,0 @@
-use super::{
-    Accept, EntityKind, Input, Interactive, Point, PolyVertex, Prompt, RayLine, Result, Session, Step, Value, Vec2, added, bad, json, lwpoly, number,
-    point_param, point_req, points_param, size_param, v3,
-};
-
-pub(super) fn run_point(s: &mut Session, p: &Value) -> Result<Value> {
-    let pts = match point_param(p, "at") {
-        Some(a) => vec![a],
-        None => points_param(p, "points").ok_or_else(|| bad("point", "`at` or `points` is required"))?,
-    };
-    let mut hs = Vec::new();
-    for q in pts {
-        hs.push(s.add_entity(EntityKind::Point(Point { p: v3(q), angle: 0.0 }))?.hex());
-    }
-    Ok(json!({ "handles": hs }))
-}
-
-pub(super) fn run_ray(s: &mut Session, p: &Value) -> Result<Value> {
-    let b = point_req("ray", p, "base")?;
-    let t = point_req("ray", p, "through")?;
-    let dir = (t - b).normalized();
-    if dir == Vec2::ZERO {
-        return Err(bad("ray", "through point equals base"));
-    }
-    added(s.add_entity(EntityKind::Ray(RayLine { base: v3(b), dir: v3(dir) }))?)
-}
-
-fn donut(center: Vec2, inside: f64, outside: f64) -> EntityKind {
-    let r = (inside.abs() + outside.abs()) / 4.0;
-    let w = (outside.abs() - inside.abs()).abs() / 2.0;
-    let mut k = lwpoly(vec![PolyVertex::with_bulge(center - Vec2::X * r, 1.0), PolyVertex::with_bulge(center + Vec2::X * r, 1.0)], true);
-    if let EntityKind::LwPolyline(pl) = &mut k {
-        pl.const_width = w;
-    }
-    k
-}
-
-pub(super) fn run_donut(s: &mut Session, p: &Value) -> Result<Value> {
-    let c = point_req("donut", p, "center")?;
-    let inside = size_param("donut", p, "inside", true)?.unwrap_or(0.5);
-    let outside = size_param("donut", p, "outside", false)?.unwrap_or(1.0);
-    if inside > outside {
-        return Err(bad("donut", "`inside` must not be larger than `outside`"));
-    }
-    added(s.add_entity(donut(c, inside, outside))?)
-}
-
-pub(super) struct PointM {
-    pub(super) multiple: bool,
-}
-
-impl Interactive for PointM {
-    fn name(&self) -> &'static str {
-        "POINT"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        let d = s.doc().ok();
-        let _ = d;
-        Prompt::new("Specify a point", Accept::POINT)
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        let (m, sz) = s.doc().map(|d| (d.header.i64("PDMODE", 0), d.header.f64("PDSIZE", 0.0))).unwrap_or((0, 0.0));
-        s.echo(format!("Current point modes:  PDMODE={m}  PDSIZE={sz:.4}"));
-        Ok(Step::Continue)
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match i {
-            Input::Point(p) => {
-                s.add_entity(EntityKind::Point(Point { p: v3(p), angle: 0.0 }))?;
-                Ok(if self.multiple { Step::Continue } else { Step::Done })
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-}
-
-/// RAY: a start point, then through points until Enter (XLINE is `draw2::XlineM2`).
-#[derive(Default)]
-pub(super) struct RayM {
-    base: Option<Vec2>,
-}
-
-impl Interactive for RayM {
-    fn name(&self) -> &'static str {
-        "RAY"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match self.base {
-            None => Prompt::new("Specify start point", Accept::POINT),
-            Some(b) => Prompt::new("Specify through point", Accept::POINT).base(b),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match i {
-            Input::Point(p) => {
-                match self.base {
-                    None => self.base = Some(p),
-                    Some(b) => {
-                        let d = (p - b).normalized();
-                        if d != Vec2::ZERO {
-                            s.add_entity(EntityKind::Ray(RayLine { base: v3(b), dir: v3(d) }))?;
-                        }
-                    }
-                }
-                Ok(Step::Continue)
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        match self.base {
-            Some(b) if !b.near(c, 1e-12) => vec![EntityKind::Ray(RayLine { base: v3(b), dir: v3((c - b).normalized()) })],
-            _ => Vec::new(),
-        }
-    }
-}
-
-#[derive(Default)]
-pub(super) struct DonutM {
-    inside: Option<f64>,
-    outside: Option<f64>,
-}
-
-impl Interactive for DonutM {
-    fn name(&self) -> &'static str {
-        "DONUT"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        let d = s.doc().ok();
-        let di = d.map(|d| d.header.f64("DONUTID", 0.5)).unwrap_or(0.5);
-        let dout = d.map(|d| d.header.f64("DONUTOD", 1.0)).unwrap_or(1.0);
-        match (self.inside, self.outside) {
-            (None, _) => Prompt::new("Specify inside diameter of donut", Accept::NUMBER).default(format!("{di:.4}")),
-            (Some(_), None) => Prompt::new("Specify outside diameter of donut", Accept::NUMBER).default(format!("{dout:.4}")),
-            _ => Prompt::new("Specify center of donut", Accept::POINT).kw(&[]),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        let hdr = |s: &Session, k: &str, d: f64| s.doc().map(|x| x.header.f64(k, d)).unwrap_or(d);
-        match (self.inside, self.outside, i) {
-            (None, _, Input::Text(t)) => {
-                self.inside = Some(number(&t).ok_or_else(|| crate::EngineError::Other("Requires a distance.".into()))?.abs())
-            }
-            (None, _, Input::Enter) => self.inside = Some(hdr(s, "DONUTID", 0.5)),
-            (Some(_), None, Input::Text(t)) => {
-                self.outside = Some(number(&t).ok_or_else(|| crate::EngineError::Other("Requires a distance.".into()))?.abs())
-            }
-            (Some(_), None, Input::Enter) => self.outside = Some(hdr(s, "DONUTOD", 1.0)),
-            (Some(a), Some(b), Input::Point(p)) => {
-                s.add_entity(donut(p, a, b))?;
-                let d = s.doc_mut()?;
-                d.header.set_f64("DONUTID", a);
-                d.header.set_f64("DONUTOD", b);
-            }
-            (Some(_), Some(_), Input::Enter) => return Ok(Step::Done),
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        match (self.inside, self.outside) {
-            (Some(a), Some(b)) => vec![donut(c, a, b)],
-            _ => Vec::new(),
-        }
-    }
-}
@@ -1,137 +0,0 @@
-use super::{
-    Accept, EntityKind, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, added, bad, bool_or, lwpoly, number, point_req, points_param,
-    polygon_from_edge, polygon_typed_radius_point, polygon_vertices, size_param,
-};
-
-pub(super) fn run_polygon(s: &mut Session, p: &Value) -> Result<Value> {
-    // A `sides` that is not a whole number (e.g. -3) is refused, not replaced by the default 4.
-    let n = match p.get("sides") {
-        None | Some(Value::Null) => 4,
-        Some(v) => v.as_u64().and_then(|n| usize::try_from(n).ok()).unwrap_or(0),
-    };
-    if !(3..=1024).contains(&n) {
-        return Err(bad("polygon", "sides must be 3..1024"));
-    }
-    let vs = if let Some(e) = points_param(p, "edge") {
-        let (Some(a), Some(b)) = (e.first(), e.get(1)) else { return Err(bad("polygon", "edge needs 2 points")) };
-        if a.near(*b, 1e-12) {
-            return Err(bad("polygon", "edge endpoints must differ"));
-        }
-        polygon_from_edge(*a, *b, n)
-    } else {
-        let c = point_req("polygon", p, "center")?;
-        let r = size_param("polygon", p, "radius", false)?.ok_or_else(|| bad("polygon", "`radius` (number) is required"))?;
-        let inscribed = bool_or(p, "inscribed", true);
-        // Without an angle, the bottom edge is horizontal, as with a typed radius.
-        let rp = match p.get("angle").and_then(Value::as_f64).filter(|a| a.is_finite()) {
-            Some(a) => Vec2::polar(c, r, a.to_radians()),
-            None => polygon_typed_radius_point(c, n, r, inscribed),
-        };
-        polygon_vertices(c, n, rp, inscribed)
-    };
-    added(s.add_entity(lwpoly(vs, true))?)
-}
-
-#[derive(Default)]
-pub(super) struct PolygonM {
-    sides: Option<usize>,
-    center: Option<Vec2>,
-    edge: bool,
-    edge_pts: Vec<Vec2>,
-    inscribed: Option<bool>,
-}
-
-impl Interactive for PolygonM {
-    fn name(&self) -> &'static str {
-        "POLYGON"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        let def = s.doc().map(|d| d.header.i64("POLYSIDES", 4)).unwrap_or(4);
-        match (self.sides, self.edge, self.center, self.inscribed) {
-            (None, _, _, _) => Prompt::new("Enter number of sides", Accept::NUMBER).default(def.to_string()),
-            (Some(_), true, _, _) => Prompt::new(
-                if self.edge_pts.is_empty() { "Specify first endpoint of edge" } else { "Specify second endpoint of edge" },
-                Accept::POINT,
-            )
-            .base_opt(self.edge_pts.first().copied()),
-            (Some(_), false, None, _) => Prompt::new("Specify center of polygon", Accept::POINT).kw(&["Edge"]),
-            (Some(_), false, Some(_), None) => Prompt::new("Enter an option", Accept::TEXT)
-                .kw(&["Inscribed in circle", "Circumscribed about circle"])
-                .default(if s.last_used.polygon_circumscribed { "C" } else { "I" }),
-            (Some(_), false, Some(c), Some(_)) => Prompt::new("Specify radius of circle", Accept::POINT_OR_NUMBER).base(c).distance(),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.sides.is_none() {
-            let n = match &i {
-                Input::Text(t) => t
-                    .trim()
-                    .parse::<usize>()
-                    .ok()
-                    .filter(|n| (3..=1024).contains(n))
-                    .ok_or_else(|| crate::EngineError::Other("Requires an integer between 3 and 1024.".into()))?,
-                Input::Enter => s.doc()?.header.i64("POLYSIDES", 4).clamp(3, 1024) as usize,
-                _ => return Ok(Step::Continue),
-            };
-            self.sides = Some(n);
-            s.doc_mut()?.header.set_i64("POLYSIDES", n as i64);
-            return Ok(Step::Continue);
-        }
-        let n = self.sides.unwrap_or(4);
-        if self.edge {
-            if let Input::Point(p) = i {
-                if self.edge_pts.first().is_some_and(|a| a.near(p, 1e-12)) {
-                    return Err(crate::EngineError::Other("Edge endpoints must differ.".into()));
-                }
-                self.edge_pts.push(p);
-                if self.edge_pts.len() == 2 {
-                    s.add_entity(lwpoly(polygon_from_edge(self.edge_pts[0], self.edge_pts[1], n), true))?;
-                    return Ok(Step::Done);
-                }
-            }
-            return Ok(Step::Continue);
-        }
-        match (self.center, self.inscribed, i) {
-            (None, _, Input::Keyword(k)) if k == "Edge" => self.edge = true,
-            (None, _, Input::Point(p)) => self.center = Some(p),
-            (Some(_), None, inp @ (Input::Keyword(_) | Input::Enter | Input::Text(_))) => {
-                // Enter takes the option used last time (the prompt's default).
-                let ins = match inp {
-                    Input::Keyword(k) => k.starts_with('I'),
-                    Input::Text(t) => !t.trim().to_ascii_lowercase().starts_with('c'),
-                    _ => !s.last_used.polygon_circumscribed,
-                };
-                self.inscribed = Some(ins);
-                s.last_used.polygon_circumscribed = !ins;
-            }
-            (Some(c), Some(ins), Input::Point(p)) => {
-                if c.near(p, 1e-12) {
-                    return Err(crate::EngineError::Other("Value must be positive and nonzero.".into()));
-                }
-                s.add_entity(lwpoly(polygon_vertices(c, n, p, ins), true))?;
-                return Ok(Step::Done);
-            }
-            (Some(c), Some(ins), Input::Text(t)) => {
-                let r = number(&t).ok_or_else(|| crate::EngineError::Other("Requires numeric distance or point.".into()))?;
-                if !r.is_finite() || r <= 0.0 {
-                    return Err(crate::EngineError::Other("Value must be positive and nonzero.".into()));
-                }
-                let rp = polygon_typed_radius_point(c, n, r, ins);
-                s.add_entity(lwpoly(polygon_vertices(c, n, rp, ins), true))?;
-                return Ok(Step::Done);
-            }
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        let n = self.sides.unwrap_or(4);
-        if self.edge {
-            return self.edge_pts.first().map(|a| vec![lwpoly(polygon_from_edge(*a, c, n), true)]).unwrap_or_default();
-        }
-        match (self.center, self.inscribed) {
-            (Some(ctr), Some(ins)) => vec![lwpoly(polygon_vertices(ctr, n, c, ins), true)],
-            _ => Vec::new(),
-        }
-    }
-}
@@ -1,173 +0,0 @@
-use super::{
-    Accept, EntityKind, Input, Interactive, Prompt, Result, Session, Spline, Step, Value, Vec2, added, bad, bool_or, distinct_points, find_command,
-    points_param,
-};
-
-pub(super) fn run_spline(s: &mut Session, p: &Value) -> Result<Value> {
-    if p.get("object").is_some() {
-        return crate::cmd::spline_opts::run_object(s, p);
-    }
-    let sp = if let Some(f) = points_param(p, "fit") {
-        if distinct_points(&f).len() < 2 {
-            return Err(bad("spline", "need 2+ different fit points"));
-        }
-        Spline::fit_with(&f, bool_or(p, "closed", false), crate::cmd::spline_opts::json_options(s, p)?)
-    } else if let Some(c) = points_param(p, "control") {
-        if c.len() < 2 || c.len() > crate::cmd::curves::MAX_GEN {
-            return Err(bad("spline", "need 2+ control points"));
-        }
-        // Degree 1..=10 as at the Degree prompt, `spline.cv` and DXF input (tessellation grows
-        // with its square).
-        Spline::from_control(c, p.get("degree").and_then(Value::as_u64).unwrap_or(3).clamp(1, 10) as usize)
-    } else {
-        return Err(bad("spline", "`fit` or `control` points are required"));
-    };
-    added(s.add_entity(EntityKind::Spline(sp))?)
-}
-
-#[derive(Default)]
-pub(super) struct SplineM {
-    pts: Vec<Vec2>,
-    asking_method: bool,
-    /// `Method` > `CV` hands over to the control-vertex machine (`spline.cv`).
-    delegate: Option<Box<dyn Interactive>>,
-    /// Knots, end tangents and fit tolerance chosen so far.
-    opts: cadcraft_geom::FitOptions,
-    /// An option asking a further question (Knots, Tangency, toLerance, Object).
-    ask: Option<crate::cmd::spline_opts::SplineAsk>,
-}
-
-impl SplineM {
-    fn make(&self, closed: bool) -> Spline {
-        Spline::fit_with(&self.pts, closed, self.opts)
-    }
-}
-
-impl Interactive for SplineM {
-    fn name(&self) -> &'static str {
-        "SPLINE"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        self.opts.knots = crate::cmd::spline_opts::current_knots(s);
-        s.echo(format!("Current settings: Method=Fit   Knots={}", self.opts.knots.name()));
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        if let Some(d) = &self.delegate {
-            return d.prompt(s);
-        }
-        if let Some(a) = &self.ask {
-            return a.prompt(&self.opts, &self.pts);
-        }
-        if self.asking_method {
-            return Prompt::new("Enter spline creation method", crate::cmd::curves::KW).kw(&["Fit", "CV"]).default("Fit");
-        }
-        match self.pts.len() {
-            0 => Prompt::new("Specify first point", Accept::POINT).kw(&["Method", "Knots", "Object"]),
-            1 => Prompt::new("Enter next point", Accept::POINT).kw(&["start Tangency", "toLerance"]).base_opt(self.pts.last().copied()),
-            2 => Prompt::new("Enter next point", Accept::POINT).kw(&["end Tangency", "toLerance", "Undo"]).base_opt(self.pts.last().copied()),
-            _ => {
-                Prompt::new("Enter next point", Accept::POINT).kw(&["end Tangency", "toLerance", "Undo", "Close"]).base_opt(self.pts.last().copied())
-            }
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(d) = &mut self.delegate {
-            return d.input(s, i);
-        }
-        if let Some(a) = &mut self.ask {
-            use crate::cmd::spline_opts::Outcome;
-            return match a.input(s, i, &mut self.opts, &self.pts)? {
-                Outcome::Stay => Ok(Step::Continue),
-                Outcome::Back => {
-                    self.ask = None;
-                    Ok(Step::Continue)
-                }
-                Outcome::Finish => {
-                    self.ask = None;
-                    if self.pts.len() >= 2 {
-                        s.add_entity(EntityKind::Spline(self.make(false)))?;
-                    }
-                    Ok(Step::Done)
-                }
-                Outcome::Done => Ok(Step::Done),
-            };
-        }
-        if self.asking_method {
-            match i {
-                Input::Keyword(k) if k == "CV" => {
-                    let Some(factory) = find_command("spline.cv").and_then(|c| c.interactive) else {
-                        return Err(crate::EngineError::Other("CV: not available yet".into()));
-                    };
-                    let mut m = factory(s)?;
-                    self.asking_method = false;
-                    let step = m.begin(s)?;
-                    self.delegate = Some(m);
-                    return Ok(step);
-                }
-                Input::Keyword(_) | Input::Enter => self.asking_method = false,
-                Input::Text(_) => return Err(crate::EngineError::Other("Invalid option keyword.".into())),
-                _ => {}
-            }
-            return Ok(Step::Continue);
-        }
-        match i {
-            Input::Point(p) => {
-                self.pts.push(p);
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Undo" => {
-                self.pts.pop();
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Close" => {
-                // A smooth closed (periodic) curve, not a repeat of the first point.
-                s.add_entity(EntityKind::Spline(self.make(true)))?;
-                Ok(Step::Done)
-            }
-            Input::Keyword(k) if k == "Method" => {
-                self.asking_method = true;
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) => {
-                // Knots, Object, start/end Tangency, toLerance ask their own question.
-                self.ask = Some(
-                    crate::cmd::spline_opts::SplineAsk::from_keyword(&k)
-                        .ok_or_else(|| crate::EngineError::Other("Invalid option keyword.".into()))?,
-                );
-                Ok(Step::Continue)
-            }
-            Input::Enter => {
-                if self.pts.len() >= 2 {
-                    s.add_entity(EntityKind::Spline(self.make(false)))?;
-                }
-                Ok(Step::Done)
-            }
-            Input::Text(_) => Err(crate::EngineError::Other("Point or option keyword required.".into())),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if let Some(d) = &self.delegate {
-            return d.preview(s, c);
-        }
-        if self.pts.is_empty() {
-            return Vec::new();
-        }
-        let mut opts = self.opts;
-        let mut pts = self.pts.clone();
-        match self.ask {
-            // Rubber-band the tangent being picked.
-            Some(crate::cmd::spline_opts::SplineAsk::StartTangent) => {
-                opts.start_tangent = self.pts.first().map(|f| c - *f).filter(|d| d.len() > 1e-12)
-            }
-            Some(crate::cmd::spline_opts::SplineAsk::EndTangent) => opts.end_tangent = self.pts.last().map(|l| c - *l).filter(|d| d.len() > 1e-12),
-            Some(_) => {}
-            None => pts.push(c),
-        }
-        if pts.len() < 2 {
-            return Vec::new();
-        }
-        vec![EntityKind::Spline(Spline::fit_with(&pts, false, opts))]
-    }
-}
@@ -1,277 +0,0 @@
-use super::{
-    Accept, EntityKind, HAlign, Input, Interactive, MText, PolyVertex, Prompt, Result, Session, Step, Text, VAlign, Value, Vec2, added, bad, bool_or,
-    f64_or, lwpoly, number, point_req, str_param, v3,
-};
-
-/// Justification code → (halign, valign).
-pub(crate) fn justify(j: &str) -> Option<(HAlign, VAlign)> {
-    Some(match j.to_ascii_uppercase().as_str() {
-        "L" | "LEFT" => (HAlign::Left, VAlign::Baseline),
-        "C" | "CENTER" => (HAlign::Center, VAlign::Baseline),
-        "R" | "RIGHT" => (HAlign::Right, VAlign::Baseline),
-        "A" | "ALIGN" => (HAlign::Aligned, VAlign::Baseline),
-        "M" | "MIDDLE" => (HAlign::Middle, VAlign::Baseline),
-        "F" | "FIT" => (HAlign::Fit, VAlign::Baseline),
-        "TL" => (HAlign::Left, VAlign::Top),
-        "TC" => (HAlign::Center, VAlign::Top),
-        "TR" => (HAlign::Right, VAlign::Top),
-        "ML" => (HAlign::Left, VAlign::Middle),
-        "MC" => (HAlign::Center, VAlign::Middle),
-        "MR" => (HAlign::Right, VAlign::Middle),
-        "BL" => (HAlign::Left, VAlign::Bottom),
-        "BC" => (HAlign::Center, VAlign::Bottom),
-        "BR" => (HAlign::Right, VAlign::Bottom),
-        _ => return None,
-    })
-}
-
-pub(crate) fn make_text(s: &Session, at: Vec2, value: &str, height: f64, rotation: f64, j: (HAlign, VAlign)) -> EntityKind {
-    let style = s.doc().map(|d| d.header.str("TEXTSTYLE", "Standard")).unwrap_or_else(|_| "Standard".into());
-    let (h, v) = j;
-    let left = h == HAlign::Left && v == VAlign::Baseline;
-    EntityKind::Text(Text {
-        insert: v3(at),
-        align_pt: if left { None } else { Some(v3(at)) },
-        height,
-        value: value.into(),
-        rotation,
-        width_factor: 1.0,
-        oblique: 0.0,
-        style,
-        halign: h,
-        valign: v,
-    })
-}
-
-pub(super) fn run_text(s: &mut Session, p: &Value) -> Result<Value> {
-    let at = point_req("text", p, "at")?;
-    let text = str_param(p, "text").ok_or_else(|| bad("text", "`text` is required"))?;
-    let height = f64_or(p, "height", s.doc()?.header.f64("TEXTSIZE", 0.2));
-    if height <= 0.0 {
-        return Err(bad("text", "height must be positive"));
-    }
-    let j = justify(str_param(p, "justify").unwrap_or("L")).ok_or_else(|| bad("text", "unknown justification"))?;
-    let k = make_text(s, at, text, height, f64_or(p, "rotation", 0.0).to_radians(), j);
-    added(s.add_entity(k)?)
-}
-
-pub(super) fn run_mtext(s: &mut Session, p: &Value) -> Result<Value> {
-    let at = point_req("mtext", p, "at")?;
-    let text = str_param(p, "text").ok_or_else(|| bad("mtext", "`text` is required"))?;
-    let height = f64_or(p, "height", s.doc()?.header.f64("TEXTSIZE", 0.2));
-    if height <= 0.0 {
-        return Err(bad("mtext", "height must be positive"));
-    }
-    let style = match str_param(p, "style") {
-        Some(n) => s.doc()?.text_style(n).map(|t| t.name.clone()).ok_or_else(|| bad("mtext", format!("no text style \"{n}\"")))?,
-        None => s.doc()?.header.str("TEXTSTYLE", "Standard"),
-    };
-    let attach = match str_param(p, "justify") {
-        Some(j) => crate::cmd::mtext_opts::attach_code(j).ok_or_else(|| bad("mtext", "`justify` must be TL, TC, TR, ML, MC, MR, BL, BC or BR"))?,
-        None => p.get("attach").and_then(Value::as_u64).unwrap_or(1).clamp(1, 9) as u8,
-    };
-    let width = f64_or(p, "width", 0.0).max(0.0);
-    let k = EntityKind::MText(MText {
-        insert: v3(at),
-        height,
-        width,
-        attach,
-        rotation: f64_or(p, "rotation", 0.0).to_radians(),
-        style,
-        contents: crate::cmd::mtext_opts::json_paragraphs(p, text.replace('\n', "\\P"), height)?,
-        line_spacing: f64_or(p, "lineSpacing", 1.0),
-        line_spacing_exact: bool_or(p, "lineSpacingExact", false),
-        columns: crate::cmd::mtext_opts::json_columns(p, height, width)?,
-    });
-    added(s.add_entity(k)?)
-}
-
-pub(super) struct TextM {
-    at: Option<Vec2>,
-    height: Option<f64>,
-    rotation: Option<f64>,
-    justify: (HAlign, VAlign),
-    asking_justify: bool,
-    line: usize,
-    /// Run by a LISP routine (`command`): one line of text ends the command, as AutoLISP's
-    /// `command` runs TEXT; typed and in scripts each line asks for the next.
-    single_line: bool,
-}
-
-impl TextM {
-    pub(super) fn new(s: &Session) -> Self {
-        TextM {
-            at: None,
-            height: None,
-            rotation: None,
-            justify: (HAlign::Left, VAlign::Baseline),
-            asking_justify: false,
-            line: 0,
-            single_line: s.lisp_running(),
-        }
-    }
-}
-
-impl Interactive for TextM {
-    fn name(&self) -> &'static str {
-        "TEXT"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        let th = s.doc().map(|d| d.header.f64("TEXTSIZE", 0.2)).unwrap_or(0.2);
-        if self.asking_justify {
-            return Prompt::new("Enter an option", Accept::TEXT)
-                .kw(&["Left", "Center", "Right", "Align", "Middle", "Fit", "TL", "TC", "TR", "ML", "MC", "MR", "BL", "BC", "BR"]);
-        }
-        match (self.at, self.height, self.rotation) {
-            (None, _, _) => Prompt::new("Specify start point of text", Accept::POINT).kw(&["Justify", "Style"]),
-            (Some(a), None, _) => Prompt::new("Specify height", Accept::POINT_OR_NUMBER).default(format!("{th:.4}")).base(a),
-            (Some(a), Some(_), None) => Prompt::new("Specify rotation angle of text", Accept::POINT_OR_NUMBER).default("0").base(a),
-            _ => Prompt::new("Enter text", Accept::TEXT),
-        }
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        let d = s.doc()?;
-        let style = d.header.str("TEXTSTYLE", "Standard");
-        let anno = if d.text_style(&style).is_some_and(|st| st.annotative) { "Yes" } else { "No" };
-        let msg =
-            format!("Current text style:  \"{style}\"  Text height:  {:.4}  Annotative:  {anno}  Justify:  Left", d.header.f64("TEXTSIZE", 0.2));
-        s.echo(msg);
-        Ok(Step::Continue)
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.asking_justify {
-            let code = match &i {
-                Input::Keyword(k) | Input::Text(k) => k.clone(),
-                _ => return Ok(Step::Continue),
-            };
-            self.justify = justify(&code).unwrap_or(self.justify);
-            self.asking_justify = false;
-            return Ok(Step::Continue);
-        }
-        let th = s.doc()?.header.f64("TEXTSIZE", 0.2);
-        match (self.at, self.height, self.rotation, i) {
-            (None, _, _, Input::Keyword(k)) if k == "Justify" => self.asking_justify = true,
-            (None, _, _, Input::Point(p)) => self.at = Some(p),
-            (Some(_), None, _, Input::Enter) => self.height = Some(th),
-            (Some(a), None, _, Input::Point(p)) => self.height = Some(a.dist(p).max(1e-9)),
-            (Some(_), None, _, Input::Text(t)) => {
-                let h = number(&t).filter(|h| *h > 0.0).ok_or_else(|| crate::EngineError::Other("Requires a positive height.".into()))?;
-                self.height = Some(h);
-                s.doc_mut()?.header.set_f64("TEXTSIZE", h);
-            }
-            (Some(_), Some(_), None, Input::Enter) => self.rotation = Some(0.0),
-            (Some(a), Some(_), None, Input::Point(p)) => self.rotation = Some(a.angle_to(p)),
-            (Some(_), Some(_), None, Input::Text(t)) => {
-                self.rotation = Some(s.angle_settings().direction(&t).ok_or_else(|| crate::EngineError::Other("Requires an angle.".into()))?)
-            }
-            (Some(a), Some(h), Some(r), Input::Text(t)) => {
-                let at = a + Vec2::from_angle(r - std::f64::consts::FRAC_PI_2) * (h * 5.0 / 3.0 * self.line as f64);
-                let k = make_text(s, at, &t, h, r, self.justify);
-                s.add_entity(k)?;
-                self.line += 1;
-                if self.single_line {
-                    return Ok(Step::Done);
-                }
-            }
-            (Some(_), Some(_), Some(_), Input::Enter) => return Ok(Step::Done),
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-}
-
-#[derive(Default)]
-pub(super) struct MTextM {
-    first: Option<Vec2>,
-    second: Option<Vec2>,
-    /// Paragraphs typed so far: one per input line, an empty line ends the text (as on
-    /// AutoCAD's command line and in scripts).
-    lines: Vec<String>,
-    /// Height, justification, line spacing, rotation, style and width set by the options.
-    opts: crate::cmd::mtext_opts::MTextOpts,
-    /// An option asking a further question.
-    ask: Option<crate::cmd::mtext_opts::MTextAsk>,
-}
-
-impl MTextM {
-    /// The box is known: the opposite corner was picked or the Width option answered.
-    fn boxed(&self) -> bool {
-        self.second.is_some() || self.opts.width.is_some()
-    }
-}
-
-impl Interactive for MTextM {
-    fn name(&self) -> &'static str {
-        "MTEXT"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        self.opts = crate::cmd::mtext_opts::MTextOpts::new(s);
-        let anno = s.doc()?.text_style(&self.opts.style).is_some_and(|st| st.annotative);
-        s.echo(format!(
-            "Current text style:  \"{}\"  Text height:  {:.4}  Annotative:  {}",
-            self.opts.style,
-            self.opts.height,
-            if anno { "Yes" } else { "No" }
-        ));
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let (Some(a), Some(q)) = (self.first, self.ask) {
-            return q.prompt(&self.opts, a);
-        }
-        match self.first {
-            None => Prompt::new("Specify first corner", Accept::POINT),
-            Some(a) if !self.boxed() => Prompt::new("Specify opposite corner", Accept::POINT)
-                .kw(&["Height", "Justify", "Line spacing", "Rotation", "Style", "Width", "Columns"])
-                .base(a),
-            _ if self.lines.is_empty() => Prompt::new("Enter text (use \\P for new paragraphs)", Accept::TEXT),
-            _ => Prompt::new("Enter next line of text (empty line to finish)", Accept::TEXT),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let (Some(a), Some(q)) = (self.first, self.ask) {
-            use crate::cmd::mtext_opts::Outcome;
-            self.ask = match q.input(s, i, &mut self.opts, a)? {
-                Outcome::Ask(next) => Some(next),
-                Outcome::Back | Outcome::Text => None,
-            };
-            return Ok(Step::Continue);
-        }
-        match (self.first, self.boxed(), i) {
-            (None, _, Input::Point(p)) => self.first = Some(p),
-            (Some(_), false, Input::Point(p)) => self.second = Some(p),
-            (Some(_), false, Input::Keyword(k)) => {
-                self.ask = Some(
-                    crate::cmd::mtext_opts::MTextAsk::from_keyword(&k).ok_or_else(|| crate::EngineError::Other("Invalid option keyword.".into()))?,
-                );
-            }
-            (Some(_), true, Input::Text(t)) if !t.is_empty() => self.lines.push(t),
-            (Some(a), true, Input::Text(_) | Input::Enter) => {
-                if self.lines.is_empty() {
-                    return Ok(Step::Done);
-                }
-                s.add_entity(EntityKind::MText(self.opts.mtext(a, self.second, self.lines.join("\\P"))))?;
-                return Ok(Step::Done);
-            }
-            (_, _, Input::Enter) => return Ok(Step::Done),
-            _ => {}
-        }
-        Ok(Step::Continue)
-    }
-    fn editing_mtext(&self) -> Option<MText> {
-        let a = self.first?;
-        (self.boxed() && self.ask.is_none()).then(|| self.opts.mtext(a, self.second, String::new()))
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        match (self.first, self.boxed(), self.ask) {
-            (Some(a), false, None) => {
-                // The box, turned by the rotation about the first corner.
-                let r = self.opts.rotation;
-                let l = (c - a).rotate(-r);
-                let corners = [Vec2::ZERO, Vec2::new(l.x, 0.0), l, Vec2::new(0.0, l.y)];
-                vec![lwpoly(corners.iter().map(|q| PolyVertex::new(a + q.rotate(r))).collect(), true)]
-            }
-            _ => Vec::new(),
-        }
-    }
-}
@@ -1,384 +0,0 @@
-use super::{
-    Accept, Arc, Circle, EntityKind, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, added, arc, bad, circle, curves, line,
-    norm_angle, number, other, point_param, point_req, point_value,
-};
-
-// =====================================================================================
-// Generic point/value sequences (arc and circle variants)
-// =====================================================================================
-
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub(super) enum ArcV {
-    /// The ARC command itself: three points, with options switching to the other variants.
-    ThreeP,
-    /// Start, end, then center.
-    Sec,
-    Sce,
-    Sca,
-    Scl,
-    Sea,
-    Sed,
-    Ser,
-    Cse,
-    Csa,
-    Csl,
-    CircleCd,
-    Circle2p,
-    Circle3p,
-}
-
-/// What a step asks for.
-#[derive(Clone, Copy, Debug)]
-enum Ask {
-    Point,
-    /// Absolute angle from value `base` to the picked point, or a typed angle.
-    Angle(usize),
-    /// CCW angle at value `center` from the ray to value `from` to the ray to the picked point.
-    Sweep(usize, usize),
-    /// Distance from value `base`, or a typed distance (may be negative).
-    Dist(usize),
-}
-
-#[derive(Clone, Copy, Debug)]
-enum Val {
-    P(Vec2),
-    N(f64),
-}
-
-impl Val {
-    fn p(self) -> Option<Vec2> {
-        if let Val::P(p) = self { Some(p) } else { None }
-    }
-    fn n(self) -> Option<f64> {
-        if let Val::N(n) = self { Some(n) } else { None }
-    }
-}
-
-impl ArcV {
-    fn name(self) -> &'static str {
-        match self {
-            ArcV::CircleCd | ArcV::Circle2p | ArcV::Circle3p => "CIRCLE",
-            _ => "ARC",
-        }
-    }
-    fn steps(self) -> &'static [(&'static str, Ask)] {
-        const S: &str = "Specify start point of arc";
-        const C: &str = "Specify center point of arc";
-        const E: &str = "Specify end point of arc";
-        const A: &str = "Specify included angle";
-        const L: &str = "Specify length of chord";
-        match self {
-            ArcV::ThreeP => &[(S, Ask::Point), ("Specify second point of arc", Ask::Point), (E, Ask::Point)],
-            ArcV::Sec => &[(S, Ask::Point), (E, Ask::Point), (C, Ask::Point)],
-            ArcV::Sce => &[(S, Ask::Point), (C, Ask::Point), (E, Ask::Point)],
-            ArcV::Sca => &[(S, Ask::Point), (C, Ask::Point), (A, Ask::Sweep(1, 0))],
-            ArcV::Scl => &[(S, Ask::Point), (C, Ask::Point), (L, Ask::Dist(0))],
-            ArcV::Sea => &[(S, Ask::Point), (E, Ask::Point), (A, Ask::Angle(0))],
-            ArcV::Sed => &[(S, Ask::Point), (E, Ask::Point), ("Specify tangent direction for the start point of arc", Ask::Angle(0))],
-            ArcV::Ser => &[(S, Ask::Point), (E, Ask::Point), ("Specify radius of arc", Ask::Dist(1))],
-            ArcV::Cse => &[(C, Ask::Point), (S, Ask::Point), ("Specify end point of arc (hold Ctrl to switch direction)", Ask::Point)],
-            ArcV::Csa => &[(C, Ask::Point), (S, Ask::Point), (A, Ask::Sweep(0, 1))],
-            ArcV::Csl => &[(C, Ask::Point), (S, Ask::Point), (L, Ask::Dist(1))],
-            ArcV::CircleCd => &[("Specify center point for circle", Ask::Point), ("Specify diameter of circle", Ask::Dist(0))],
-            ArcV::Circle2p => {
-                &[("Specify first end point of circle's diameter", Ask::Point), ("Specify second end point of circle's diameter", Ask::Point)]
-            }
-            ArcV::Circle3p => &[
-                ("Specify first point on circle", Ask::Point),
-                ("Specify second point on circle", Ask::Point),
-                ("Specify third point on circle", Ask::Point),
-            ],
-        }
-    }
-    fn build(self, v: &[Val], ctrl: bool) -> Option<EntityKind> {
-        let p = |i: usize| v.get(i).and_then(|x| x.p());
-        let n = |i: usize| v.get(i).and_then(|x| x.n());
-        let a = match self {
-            ArcV::ThreeP => Arc::from_3_points(p(0)?, p(1)?, p(2)?),
-            ArcV::Sec => Some(Arc::from_start_center_end(p(0)?, p(2)?, p(1)?)),
-            ArcV::Sce => Some(Arc::from_start_center_end(p(0)?, p(1)?, p(2)?)),
-            ArcV::Sca => curves::arc_sca(p(0)?, p(1)?, n(2)?),
-            ArcV::Scl => curves::arc_scl(p(0)?, p(1)?, n(2)?),
-            ArcV::Sea => curves::arc_sea(p(0)?, p(1)?, n(2)?),
-            ArcV::Sed => curves::arc_sed(p(0)?, p(1)?, Vec2::from_angle(n(2)?)),
-            ArcV::Ser => curves::arc_ser(p(0)?, p(1)?, n(2)?),
-            // Center, Start, End. Ctrl keeps the two endpoints on the circle and walks the
-            // other way around: swapping the start/end angles is the mirror arc through the
-            // same two endpoints. (Continue below flips differently, by negating the start
-            // tangent; both are "reverse", but only here is the chord fixed by the picks.)
-            ArcV::Cse => {
-                let a = Arc::from_start_center_end(p(1)?, p(0)?, p(2)?);
-                Some(if ctrl { Arc::new(a.center, a.radius, a.end, a.start) } else { a })
-            }
-            ArcV::Csa => curves::arc_sca(p(1)?, p(0)?, n(2)?),
-            ArcV::Csl => curves::arc_scl(p(1)?, p(0)?, n(2)?),
-            ArcV::CircleCd => {
-                let d = n(1)?.abs();
-                let c = p(0)?;
-                return (d > 1e-12 && d.is_finite()).then(|| circle(c, d / 2.0));
-            }
-            ArcV::Circle2p => {
-                let c = Circle::from_2_points(p(0)?, p(1)?);
-                return (c.radius > 1e-12).then(|| circle(c.center, c.radius));
-            }
-            ArcV::Circle3p => {
-                let c = Circle::from_3_points(p(0)?, p(1)?, p(2)?)?;
-                return Some(circle(c.center, c.radius));
-            }
-        }?;
-        (a.radius > 1e-12 && a.radius.is_finite() && a.center.is_finite()).then(|| arc(&a))
-    }
-}
-
-impl ArcV {
-    /// Options at step `i` and the variant each one switches to (the values so far carry over).
-    fn alts(self, i: usize) -> &'static [(&'static str, ArcV)] {
-        match (self, i) {
-            (ArcV::ThreeP, 0) => &[("Center", ArcV::Cse)],
-            (ArcV::ThreeP, 1) => &[("Center", ArcV::Sce), ("End", ArcV::Sec)],
-            (ArcV::Sce, 2) => &[("Angle", ArcV::Sca), ("chord Length", ArcV::Scl)],
-            (ArcV::Cse, 2) => &[("Angle", ArcV::Csa), ("chord Length", ArcV::Csl)],
-            (ArcV::Sec, 2) => &[("Angle", ArcV::Sea), ("Direction", ArcV::Sed), ("Radius", ArcV::Ser)],
-            _ => &[],
-        }
-    }
-}
-
-pub(super) fn seq(v: ArcV) -> Box<dyn Interactive> {
-    Box::new(SeqM { v, vals: Vec::new(), cont: None })
-}
-
-/// The full ARC prompt sequence (all options; Enter at the first prompt continues the last
-/// line or arc).
-pub(crate) fn arc_machine() -> Box<dyn Interactive> {
-    seq(ArcV::ThreeP)
-}
-
-struct SeqM {
-    v: ArcV,
-    vals: Vec<Val>,
-    /// ARC continuation: start point and tangent.
-    cont: Option<(Vec2, Vec2)>,
-}
-
-impl SeqM {
-    fn ask(&self) -> Option<(&'static str, Ask)> {
-        self.v.steps().get(self.vals.len()).copied()
-    }
-    fn value_from_point(&self, ask: Ask, q: Vec2) -> Option<Val> {
-        let pt = |i: usize| self.vals.get(i).and_then(|x| x.p());
-        Some(match ask {
-            Ask::Point => Val::P(q),
-            Ask::Angle(b) => Val::N(pt(b)?.angle_to(q)),
-            Ask::Sweep(c, f) => {
-                let c = pt(c)?;
-                Val::N(norm_angle(c.angle_to(q) - c.angle_to(pt(f)?)))
-            }
-            Ask::Dist(b) => Val::N(pt(b)?.dist(q)),
-        })
-    }
-    fn base(&self) -> Option<Vec2> {
-        match self.ask()?.1 {
-            Ask::Point => self.vals.last().and_then(|v| v.p()),
-            Ask::Angle(b) | Ask::Dist(b) => self.vals.get(b).and_then(|v| v.p()),
-            Ask::Sweep(c, _) => self.vals.get(c).and_then(|v| v.p()),
-        }
-    }
-}
-
-impl Interactive for SeqM {
-    fn name(&self) -> &'static str {
-        self.v.name()
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if let Some((st, _)) = self.cont {
-            return Prompt::new("Specify end point of arc (hold Ctrl to switch direction)", Accept::POINT).base(st);
-        }
-        let kws: Vec<&str> = self.v.alts(self.vals.len()).iter().map(|a| a.0).collect();
-        let p = match self.ask() {
-            Some((m, Ask::Point)) => Prompt::new(m, Accept::POINT).base_opt(self.base()),
-            Some((m, _)) => Prompt::new(m, Accept::POINT_OR_NUMBER).base_opt(self.base()),
-            None => Prompt::new("", Accept::default()),
-        };
-        p.kw(&kws)
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some((st, dir)) = self.cont {
-            // Ctrl flips the arc: negating the start tangent makes `arc_sed` pick the mirror
-            // arc (same two points and center, opposite sweep). `ctrl_down` comes from the
-            // UI's per-frame write on `Session`; the `Input` enum itself stays free of
-            // modifiers so it remains UI-agnostic.
-            let dir = if s.ctrl_down { -dir } else { dir };
-            return match i {
-                Input::Point(e) => {
-                    let a = curves::arc_sed(st, e, dir).ok_or_else(|| other("Invalid end point."))?;
-                    s.add_entity(arc(&a))?;
-                    Ok(Step::Done)
-                }
-                Input::Enter => Ok(Step::Cancel),
-                _ => Err(other("Point required.")),
-            };
-        }
-        if let Input::Keyword(k) = &i
-            && let Some((_, v)) = self.v.alts(self.vals.len()).iter().find(|a| a.0 == k)
-        {
-            self.v = *v;
-            return Ok(Step::Continue);
-        }
-        if i == Input::Enter && self.v == ArcV::ThreeP && self.vals.is_empty() {
-            self.cont = curves::last_curve_end(s);
-            if self.cont.is_none() {
-                s.echo("No line or arc to continue.");
-                return Ok(Step::Cancel);
-            }
-            return Ok(Step::Continue);
-        }
-        let Some((_, ask)) = self.ask() else { return Ok(Step::Done) };
-        let val = match (&i, ask) {
-            (Input::Point(q), _) => self.value_from_point(ask, *q),
-            (Input::Text(t), Ask::Angle(_) | Ask::Sweep(..)) => {
-                // The tangent direction is a direction; included angles are sizes.
-                let au = s.angle_settings();
-                let a = if self.v == ArcV::Sed { au.direction(t) } else { au.amount(t) };
-                Some(Val::N(a.ok_or_else(|| other("Requires a valid angle."))?))
-            }
-            (Input::Text(t), Ask::Dist(_)) => Some(Val::N(number(t).ok_or_else(|| other("Requires numeric distance or a point."))?)),
-            (Input::Enter, _) => return Ok(Step::Cancel),
-            _ => return Err(other("Point or value required.")),
-        };
-        let Some(val) = val else { return Ok(Step::Continue) };
-        self.vals.push(val);
-        if self.vals.len() < self.v.steps().len() {
-            return Ok(Step::Continue);
-        }
-        match self.v.build(&self.vals, s.ctrl_down) {
-            Some(k) => {
-                if let EntityKind::Circle(c) = &k {
-                    let r = c.radius;
-                    s.add_entity(k)?;
-                    s.doc_mut()?.header.set_f64("CIRCLERAD", r);
-                } else {
-                    s.add_entity(k)?;
-                }
-                Ok(Step::Done)
-            }
-            None => {
-                self.vals.pop();
-                Err(other("Invalid arc or circle for these values."))
-            }
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if let Some((st, d)) = self.cont {
-            let d = if s.ctrl_down { -d } else { d };
-            return curves::arc_sed(st, c, d).map(|a| vec![arc(&a)]).unwrap_or_default();
-        }
-        let Some((_, ask)) = self.ask() else { return Vec::new() };
-        let Some(v) = self.value_from_point(ask, c) else { return Vec::new() };
-        let mut vals = self.vals.clone();
-        vals.push(v);
-        let mut out: Vec<EntityKind> = self.base().map(|b| vec![line(b, c)]).unwrap_or_default();
-        if vals.len() == self.v.steps().len() {
-            out.extend(self.v.build(&vals, s.ctrl_down));
-        }
-        out
-    }
-}
-
-fn direction_param(p: &Value) -> Option<f64> {
-    match p.get("direction") {
-        Some(v) if v.is_array() || v.is_object() => point_value(v).filter(|d| d.len() > 1e-12).map(Vec2::angle),
-        Some(v) => v.as_f64().filter(|x| x.is_finite()).map(f64::to_radians),
-        None => None,
-    }
-}
-
-fn arc_from_params(p: &Value) -> Result<EntityKind> {
-    let st = point_param(p, "start");
-    let c = point_param(p, "center");
-    let e = point_param(p, "end");
-    let ang = p.get("angle").and_then(Value::as_f64).filter(|v| v.is_finite()).map(f64::to_radians);
-    let len = p.get("length").and_then(Value::as_f64).filter(|v| v.is_finite());
-    let rad = p.get("radius").and_then(Value::as_f64).filter(|v| v.is_finite());
-    let dir = direction_param(p);
-    let a = match (st, c, e) {
-        (Some(st), Some(c), Some(e)) => Some(Arc::from_start_center_end(st, c, e)),
-        (Some(st), Some(c), None) => match (ang, len) {
-            (Some(a), _) => curves::arc_sca(st, c, a),
-            (None, Some(l)) => curves::arc_scl(st, c, l),
-            _ => return Err(bad("arc", "start+center needs `end`, `angle` or `length`")),
-        },
-        (Some(st), None, Some(e)) => match (ang, dir, rad) {
-            (Some(a), _, _) => curves::arc_sea(st, e, a),
-            (None, Some(d), _) => curves::arc_sed(st, e, Vec2::from_angle(d)),
-            (None, None, Some(r)) => curves::arc_ser(st, e, r),
-            _ => return Err(bad("arc", "start+end needs `angle`, `direction` or `radius`")),
-        },
-        _ => return Err(bad("arc", "give start with center and/or end (see params)")),
-    };
-    let a = a.filter(|a| a.radius > 1e-12 && a.radius.is_finite()).ok_or_else(|| bad("arc", "these values do not define an arc"))?;
-    Ok(arc(&a))
-}
-
-pub(super) fn run_arc_variant(s: &mut Session, p: &Value) -> Result<Value> {
-    let k = arc_from_params(p)?;
-    added(s.add_entity(k)?)
-}
-
-pub(super) fn run_arc_continue(s: &mut Session, p: &Value) -> Result<Value> {
-    let e = point_req("arc.continue", p, "end")?;
-    let (st, dir) = match (point_param(p, "start"), direction_param(p)) {
-        (Some(st), Some(d)) => (st, Vec2::from_angle(d)),
-        _ => curves::last_curve_end(s).ok_or_else(|| bad("arc.continue", "no line or arc to continue from"))?,
-    };
-    let a = curves::arc_sed(st, e, dir).ok_or_else(|| bad("arc.continue", "end point is on the tangent line"))?;
-    let h = s.add_entity(arc(&a))?;
-    // The next continuation starts where this arc was drawn to, not at its stored CCW end.
-    s.last_point = e;
-    added(h)
-}
-
-#[derive(Default)]
-pub(super) struct ArcContinueM {
-    from: Option<(Vec2, Vec2)>,
-}
-
-impl Interactive for ArcContinueM {
-    fn name(&self) -> &'static str {
-        "ARC"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        self.from = curves::last_curve_end(s);
-        if self.from.is_none() {
-            s.echo("No line or arc to continue.");
-            return Ok(Step::Cancel);
-        }
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        Prompt::new("Specify end point of arc (hold Ctrl to switch direction)", Accept::POINT).base_opt(self.from.map(|f| f.0))
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        let Some((st, dir)) = self.from else { return Ok(Step::Cancel) };
-        // Ctrl flips the direction, exactly as in `SeqM::input`.
-        let dir = if s.ctrl_down { -dir } else { dir };
-        match i {
-            Input::Point(e) => {
-                let a = curves::arc_sed(st, e, dir).ok_or_else(|| other("Invalid end point."))?;
-                s.add_entity(arc(&a))?;
-                Ok(Step::Done)
-            }
-            Input::Enter => Ok(Step::Cancel),
-            _ => Err(other("Point required.")),
-        }
-    }
-    fn preview(&self, s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.from
-            .and_then(|(st, dir)| {
-                let dir = if s.ctrl_down { -dir } else { dir };
-                curves::arc_sed(st, c, dir)
-            })
-            .map(|a| vec![arc(&a)])
-            .unwrap_or_default()
-    }
-}
@@ -1,126 +0,0 @@
-use super::{
-    Accept, EntityKind, Handle, Input, Interactive, Prompt, Result, Session, Step, Value, Vec2, added, bad, curves, json, line, other, targets,
-};
-
-// =====================================================================================
-// CENTERMARK / CENTERLINE
-// =====================================================================================
-
-/// Add a line on the CENTER linetype (loading it from the standard library when missing).
-fn add_center_line(s: &mut Session, a: Vec2, b: Vec2) -> Result<Handle> {
-    let d = s.doc_mut()?;
-    if d.linetype("CENTER").is_none()
-        && let Some(lt) = cadcraft_doc::library::standard_linetypes_for(d).into_iter().find(|l| l.name == "CENTER")
-    {
-        d.linetypes.push(lt);
-    }
-    let h = s.add_entity(line(a, b))?;
-    s.doc_mut()?.modify_entity(h, |e| e.common.linetype = "CENTER".into())?;
-    Ok(h)
-}
-
-fn center_ext(s: &Session) -> f64 {
-    let d = s.doc().ok();
-    let metric = d.is_some_and(|d| d.header.i64("MEASUREMENT", 0) == 1);
-    d.map(|d| d.header.f64("CENTEREXE", if metric { 3.5 } else { 0.12 })).unwrap_or(0.12)
-}
-
-fn center_mark(s: &mut Session, h: Handle) -> Result<Vec<String>> {
-    let e = curves::entity(s, h)?;
-    let (c, r) = match &e.kind {
-        EntityKind::Circle(c) => (c.center.xy(), c.radius),
-        EntityKind::Arc(a) => (a.center.xy(), a.radius),
-        _ => return Err(other("Select a circle or arc.")),
-    };
-    let ext = r + center_ext(s);
-    let h1 = add_center_line(s, c - Vec2::X * ext, c + Vec2::X * ext)?;
-    let h2 = add_center_line(s, c - Vec2::Y * ext, c + Vec2::Y * ext)?;
-    Ok(vec![h1.hex(), h2.hex()])
-}
-
-fn center_line(s: &mut Session, h1: Handle, h2: Handle) -> Result<Handle> {
-    let l = |h: Handle| -> Result<(Vec2, Vec2)> {
-        match curves::entity(s, h)?.kind {
-            EntityKind::Line(l) => Ok((l.a.xy(), l.b.xy())),
-            _ => Err(other("Select a line.")),
-        }
-    };
-    let (a1, b1) = l(h1)?;
-    let (mut a2, mut b2) = l(h2)?;
-    if (b1 - a1).dot(b2 - a2) < 0.0 {
-        std::mem::swap(&mut a2, &mut b2);
-    }
-    let (st, en) = (a1.mid(a2), b1.mid(b2));
-    let dir = (en - st).normalized();
-    if dir == Vec2::ZERO {
-        return Err(other("The lines do not define a center line."));
-    }
-    let ext = center_ext(s);
-    add_center_line(s, st - dir * ext, en + dir * ext)
-}
-
-pub(super) fn run_centermark(s: &mut Session, p: &Value) -> Result<Value> {
-    let hs = targets(s, p)?;
-    if hs.is_empty() {
-        return Err(bad("centermark", "`handle` or `handles` is required"));
-    }
-    let mut out = Vec::new();
-    for h in hs {
-        out.extend(center_mark(s, h)?);
-    }
-    Ok(json!({ "handles": out }))
-}
-
-pub(super) fn run_centerline(s: &mut Session, p: &Value) -> Result<Value> {
-    let h1 = curves::handle_param(p, "h1").ok_or_else(|| bad("centerline", "`h1` is required"))?;
-    let h2 = curves::handle_param(p, "h2").ok_or_else(|| bad("centerline", "`h2` is required"))?;
-    added(center_line(s, h1, h2)?)
-}
-
-pub(super) struct CenterM {
-    pub(super) first: Option<Handle>,
-    pub(super) mark: bool,
-}
-
-impl Interactive for CenterM {
-    fn name(&self) -> &'static str {
-        if self.mark { "CENTERMARK" } else { "CENTERLINE" }
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        s.set_selection(Vec::new());
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match (self.mark, self.first) {
-            (true, _) => Prompt::new("Select circle or arc to add center mark", Accept::POINT),
-            (false, None) => Prompt::new("Select first line", Accept::POINT),
-            (false, Some(_)) => Prompt::new("Select second line", Accept::POINT),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match i {
-            Input::Point(p) => {
-                let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                if self.mark {
-                    center_mark(s, h)?;
-                    return Ok(Step::Continue);
-                }
-                match self.first {
-                    None => {
-                        if !matches!(curves::entity(s, h)?.kind, EntityKind::Line(_)) {
-                            return Err(other("Select a line."));
-                        }
-                        self.first = Some(h);
-                        Ok(Step::Continue)
-                    }
-                    Some(h1) => {
-                        center_line(s, h1, h)?;
-                        Ok(Step::Done)
-                    }
-                }
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-}
@@ -1,366 +0,0 @@
-use super::{
-    Accept, EntityKind, Handle, Helix, HelixConstrain, Input, Interactive, MAX_GEN, Polyline3d, Prompt, Result, Session, Spline, Step, Value, Vec2,
-    Vec3, added, bad, bool_or, circle, curves, f64_or, f64_req, line, number, other, point_req, points_param, v3,
-};
-
-// =====================================================================================
-// 3DPOLY
-// =====================================================================================
-
-fn point3_value(v: &Value) -> Option<Vec3> {
-    let a = v.as_array()?;
-    let x = a.first()?.as_f64()?;
-    let y = a.get(1)?.as_f64()?;
-    let z = a.get(2).and_then(Value::as_f64).unwrap_or(0.0);
-    let p = Vec3::new(x, y, z);
-    p.is_finite().then_some(p)
-}
-
-pub(super) fn run_3dpoly(s: &mut Session, p: &Value) -> Result<Value> {
-    let pts: Vec<Vec3> = p.get("points").and_then(Value::as_array).map(|a| a.iter().filter_map(point3_value).collect()).unwrap_or_default();
-    if pts.len() < 2 || pts.len() > MAX_GEN {
-        return Err(bad("3dpoly", "`points` needs 2 or more [x,y,z] points"));
-    }
-    added(s.add_entity(EntityKind::Polyline3d(Polyline3d { points: pts, closed: bool_or(p, "closed", false) }))?)
-}
-
-#[derive(Default)]
-pub(super) struct Poly3dM {
-    pts: Vec<Vec2>,
-    handle: Option<Handle>,
-}
-
-impl Poly3dM {
-    fn sync(&mut self, s: &mut Session, closed: bool) -> Result<()> {
-        let k = EntityKind::Polyline3d(Polyline3d { points: self.pts.iter().map(|p| v3(*p)).collect(), closed });
-        match (self.handle, self.pts.len() >= 2) {
-            (Some(h), true) => s.doc_mut()?.modify_entity(h, |e| e.kind = k)?,
-            (None, true) => self.handle = Some(s.add_entity(k)?),
-            (Some(h), false) => {
-                s.doc_mut()?.remove_entity(h);
-                self.handle = None;
-            }
-            (None, false) => {}
-        }
-        Ok(())
-    }
-}
-
-impl Interactive for Poly3dM {
-    fn name(&self) -> &'static str {
-        "3DPOLY"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match self.pts.len() {
-            0 => Prompt::new("Specify start point of polyline", Accept::POINT),
-            1 | 2 => Prompt::new("Specify endpoint of line", Accept::POINT).kw(&["Undo"]).base_opt(self.pts.last().copied()),
-            _ => Prompt::new("Specify endpoint of line", Accept::POINT).kw(&["Close", "Undo"]).base_opt(self.pts.last().copied()),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match i {
-            Input::Point(p) => {
-                if self.pts.last().is_none_or(|l| !l.near(p, 1e-12)) && self.pts.len() < MAX_GEN {
-                    self.pts.push(p);
-                    self.sync(s, false)?;
-                }
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Undo" => {
-                self.pts.pop();
-                self.sync(s, false)?;
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) if k == "Close" => {
-                self.sync(s, true)?;
-                Ok(Step::Done)
-            }
-            Input::Enter => Ok(Step::Done),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        self.pts.last().map(|l| vec![line(*l, c)]).unwrap_or_default()
-    }
-}
-
-// =====================================================================================
-// HELIX (3D polyline approximation)
-// =====================================================================================
-
-/// A helix entity (base centre `c`, radii, height, turns, twist, start angle).
-fn helix_kind(c: Vec2, rb: f64, rt: f64, height: f64, turns: f64, ccw: bool, a0: f64) -> EntityKind {
-    let h = Helix { center: c.to3(0.0), base_radius: rb, top_radius: rt, height, turns, start_angle: a0, ccw, constrain: HelixConstrain::Height };
-    EntityKind::Helix(h.sanitized())
-}
-
-pub(super) fn run_helix(s: &mut Session, p: &Value) -> Result<Value> {
-    let c = point_req("helix", p, "center")?;
-    let rb = f64_req("helix", p, "baseRadius")?;
-    let rt = f64_or(p, "topRadius", rb);
-    let turns = f64_or(p, "turns", 3.0);
-    if !(rb > 0.0 && rt >= 0.0 && turns > 0.0 && turns <= 500.0) {
-        return Err(bad("helix", "radii must be positive and turns in (0, 500]"));
-    }
-    let height = f64_or(p, "height", 1.0);
-    if height.abs() > 1e12 || rb > 1e12 || rt > 1e12 {
-        return Err(bad("helix", "sizes are out of range"));
-    }
-    added(s.add_entity(helix_kind(c, rb, rt, height, turns, bool_or(p, "ccw", true), f64_or(p, "startAngle", 0.0).to_radians()))?)
-}
-
-#[derive(Default)]
-pub(super) struct HelixM {
-    center: Option<Vec2>,
-    rb: Option<f64>,
-    rt: Option<f64>,
-    turns: Option<f64>,
-    cw: bool,
-    diameter: bool,
-    asking: u8, // 0 main, 1 turns, 2 twist, 3 turn height
-    start: Option<f64>,
-}
-
-impl HelixM {
-    fn turns(&self) -> f64 {
-        self.turns.unwrap_or(3.0)
-    }
-    fn create(&self, s: &mut Session, height: f64) -> Result<Step> {
-        let (Some(c), Some(rb)) = (self.center, self.rb) else { return Ok(Step::Cancel) };
-        let rt = self.rt.unwrap_or(rb);
-        if !height.is_finite() || height.abs() > 1e12 {
-            return Err(other("Requires a distance."));
-        }
-        s.add_entity(helix_kind(c, rb, rt, height, self.turns(), !self.cw, self.start.unwrap_or(0.0)))?;
-        Ok(Step::Done)
-    }
-}
-
-impl Interactive for HelixM {
-    fn name(&self) -> &'static str {
-        "HELIX"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        s.echo(format!("Number of turns = {:.4}     Twist=CCW", self.turns()));
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match self.asking {
-            1 => return Prompt::new("Enter number of turns", Accept::NUMBER).default(format!("{:.4}", self.turns())),
-            2 => return Prompt::new("Enter twist direction of helix", curves::KW).kw(&["CW", "CCW"]).default("CCW"),
-            3 => return Prompt::new("Specify distance between turns", Accept::NUMBER),
-            _ => {}
-        }
-        match (self.center, self.rb, self.rt) {
-            (None, ..) => Prompt::new("Specify center point of base", Accept::POINT),
-            (Some(c), None, _) => {
-                Prompt::new(if self.diameter { "Specify base diameter" } else { "Specify base radius or" }, Accept::POINT_OR_NUMBER)
-                    .kw(if self.diameter { &[] } else { &["Diameter"] })
-                    .default("1.0000")
-                    .base(c)
-            }
-            (Some(c), Some(rb), None) => {
-                Prompt::new(if self.diameter { "Specify top diameter" } else { "Specify top radius or" }, Accept::POINT_OR_NUMBER)
-                    .kw(if self.diameter { &[] } else { &["Diameter"] })
-                    .default(format!("{rb:.4}"))
-                    .base(c)
-            }
-            (Some(c), Some(_), Some(_)) => Prompt::new("Specify helix height or", Accept::POINT_OR_NUMBER)
-                .kw(&["Axis endpoint", "Turns", "turn Height", "tWist"])
-                .default("1.0000")
-                .base(c),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match self.asking {
-            1 => {
-                if let Input::Text(t) = &i {
-                    let v = number(t).filter(|v| *v > 0.0 && *v <= 500.0).ok_or_else(|| other("Turns must be in (0, 500]."))?;
-                    self.turns = Some(v);
-                }
-                self.asking = 0;
-                return Ok(Step::Continue);
-            }
-            2 => {
-                if let Input::Keyword(k) | Input::Text(k) = &i {
-                    self.cw = k.eq_ignore_ascii_case("cw");
-                }
-                self.asking = 0;
-                return Ok(Step::Continue);
-            }
-            3 => {
-                self.asking = 0;
-                if let Input::Text(t) = &i {
-                    let v = number(t).ok_or_else(|| other("Requires a distance."))?;
-                    return self.create(s, v * self.turns());
-                }
-                return Ok(Step::Continue);
-            }
-            _ => {}
-        }
-        let num = |i: &Input, base: Option<Vec2>| -> Option<f64> {
-            match i {
-                Input::Point(p) => base.map(|b| b.dist(*p)),
-                Input::Text(t) => number(t),
-                _ => None,
-            }
-        };
-        match (self.center, self.rb, self.rt, &i) {
-            (None, _, _, Input::Point(p)) => {
-                self.center = Some(*p);
-                Ok(Step::Continue)
-            }
-            (Some(_), None | Some(_), _, Input::Keyword(k)) if k == "Diameter" => {
-                self.diameter = true;
-                Ok(Step::Continue)
-            }
-            (Some(c), None, _, _) => {
-                let v = match &i {
-                    Input::Enter => Some(1.0),
-                    _ => num(&i, Some(c)),
-                };
-                let v = v.filter(|v| *v > 0.0).ok_or_else(|| other("Requires a positive distance."))?;
-                if let Input::Point(p) = &i {
-                    self.start = Some(c.angle_to(*p));
-                }
-                self.rb = Some(if self.diameter { v / 2.0 } else { v });
-                self.diameter = false;
-                Ok(Step::Continue)
-            }
-            (Some(c), Some(rb), None, _) => {
-                let v = match &i {
-                    Input::Enter => Some(if self.diameter { rb * 2.0 } else { rb }),
-                    _ => num(&i, Some(c)),
-                };
-                let v = v.filter(|v| *v >= 0.0).ok_or_else(|| other("Requires a distance."))?;
-                self.rt = Some(if self.diameter { v / 2.0 } else { v });
-                Ok(Step::Continue)
-            }
-            (Some(c), Some(_), Some(_), _) => match &i {
-                Input::Keyword(k) => {
-                    self.asking = match k.as_str() {
-                        "Turns" => 1,
-                        "tWist" => 2,
-                        "turn Height" => 3,
-                        _ => 0,
-                    };
-                    Ok(Step::Continue)
-                }
-                Input::Enter => self.create(s, 1.0),
-                _ => {
-                    let h = num(&i, Some(c)).ok_or_else(|| other("Requires a distance."))?;
-                    self.create(s, h)
-                }
-            },
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        match (self.center, self.rb, self.rt) {
-            (Some(ct), None, _) => vec![circle(ct, ct.dist(c))],
-            (Some(ct), Some(rb), None) => {
-                vec![helix_kind(ct, rb, ct.dist(c), 0.0, self.turns(), !self.cw, self.start.unwrap_or(0.0))]
-            }
-            _ => Vec::new(),
-        }
-    }
-}
-
-// =====================================================================================
-// SPLINE by control vertices
-// =====================================================================================
-
-pub(super) fn run_spline_cv(s: &mut Session, p: &Value) -> Result<Value> {
-    let mut c = points_param(p, "control").ok_or_else(|| bad("spline.cv", "`control` points are required"))?;
-    if c.len() < 2 || c.len() > MAX_GEN {
-        return Err(bad("spline.cv", "need 2+ control points"));
-    }
-    let closed = bool_or(p, "closed", false);
-    if closed && let Some(f) = c.first().copied() {
-        c.push(f);
-    }
-    let deg = p.get("degree").and_then(Value::as_u64).unwrap_or(3).clamp(1, 10) as usize;
-    let mut sp = Spline::from_control(c, deg);
-    sp.closed = closed;
-    added(s.add_entity(EntityKind::Spline(sp))?)
-}
-
-#[derive(Default)]
-pub(super) struct SplineCvM {
-    pts: Vec<Vec2>,
-    degree: Option<usize>,
-    asking_degree: bool,
-}
-
-impl Interactive for SplineCvM {
-    fn name(&self) -> &'static str {
-        "SPLINE"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        s.echo(format!("Current settings: Method=CV   Degree={}", self.degree.unwrap_or(3)));
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if self.asking_degree {
-            return Prompt::new("Enter degree of spline", Accept::NUMBER).default(self.degree.unwrap_or(3).to_string());
-        }
-        match self.pts.len() {
-            0 => Prompt::new("Specify first point", Accept::POINT).kw(&["Method", "Degree", "Object"]),
-            1 => Prompt::new("Enter next point", Accept::POINT).base_opt(self.pts.last().copied()),
-            2 => Prompt::new("Enter next point", Accept::POINT).kw(&["Undo"]).base_opt(self.pts.last().copied()),
-            _ => Prompt::new("Enter next point", Accept::POINT).kw(&["Close", "Undo"]).base_opt(self.pts.last().copied()),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.asking_degree {
-            if let Input::Text(t) = &i {
-                let d = number(t).filter(|d| (1.0..=10.0).contains(d)).ok_or_else(|| other("Degree must be 1..10."))?;
-                self.degree = Some(d as usize);
-            }
-            self.asking_degree = false;
-            return Ok(Step::Continue);
-        }
-        let deg = self.degree.unwrap_or(3);
-        match i {
-            Input::Point(p) => {
-                if self.pts.len() < MAX_GEN {
-                    self.pts.push(p);
-                }
-                Ok(Step::Continue)
-            }
-            Input::Keyword(k) => {
-                match k.as_str() {
-                    "Degree" => self.asking_degree = true,
-                    "Undo" => {
-                        self.pts.pop();
-                    }
-                    "Close" => {
-                        let mut c = self.pts.clone();
-                        c.extend(self.pts.first().copied());
-                        let mut sp = Spline::from_control(c, deg);
-                        sp.closed = true;
-                        s.add_entity(EntityKind::Spline(sp))?;
-                        return Ok(Step::Done);
-                    }
-                    _ => s.echo(format!("{k}: use SPLINE for fit points.")),
-                }
-                Ok(Step::Continue)
-            }
-            Input::Enter => {
-                if self.pts.len() >= 2 {
-                    s.add_entity(EntityKind::Spline(Spline::from_control(self.pts.clone(), deg)))?;
-                }
-                Ok(Step::Done)
-            }
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.pts.is_empty() {
-            return Vec::new();
-        }
-        let mut pts = self.pts.clone();
-        pts.push(c);
-        vec![EntityKind::Spline(Spline::from_control(pts, self.degree.unwrap_or(3)))]
-    }
-}
@@ -1,184 +0,0 @@
-use super::{
-    Accept, Chain, EntityKind, Handle, Input, Interactive, MAX_GEN, Point, Prompt, Result, Session, Step, Value, Vec2, bad, bool_or, curves, f64_req,
-    json, number, other, point_param, str_param, targets, v3,
-};
-
-// =====================================================================================
-// DIVIDE / MEASURE
-// =====================================================================================
-
-fn chain_of(s: &Session, h: Handle) -> Result<Chain> {
-    let e = curves::entity(s, h)?;
-    Chain::of(&e.kind).ok_or_else(|| other("Cannot divide/measure that object."))
-}
-
-fn place_markers(s: &mut Session, at: &[(Vec2, Vec2)], block: Option<&str>, align: bool) -> Result<Vec<String>> {
-    let mut out = Vec::new();
-    for (p, t) in at {
-        let h = match block {
-            Some(b) => crate::cmd::blocks::insert(s, b, *p, 1.0, if align { t.angle() } else { 0.0 }, &serde_json::Map::new())?,
-            None => s.add_entity(EntityKind::Point(Point { p: v3(*p), angle: 0.0 }))?,
-        };
-        out.push(h.hex());
-    }
-    Ok(out)
-}
-
-fn check_block(s: &Session, b: Option<&str>) -> Result<()> {
-    if let Some(b) = b
-        && s.doc()?.block(b).is_none()
-    {
-        return Err(other(format!("Block \"{b}\" not found.")));
-    }
-    Ok(())
-}
-
-pub(crate) fn divide_points(c: &Chain, n: usize) -> Vec<(Vec2, Vec2)> {
-    let l = c.len();
-    let range = if c.closed { 0..n } else { 1..n };
-    range.filter_map(|i| c.at_length(l * i as f64 / n as f64)).collect()
-}
-
-pub(crate) fn measure_points(c: &Chain, step: f64) -> Vec<(Vec2, Vec2)> {
-    let l = c.len();
-    let mut out = Vec::new();
-    let mut k = 1usize;
-    while (k as f64) * step < l - 1e-9 && out.len() < MAX_GEN {
-        let d = k as f64 * step;
-        out.extend(c.at_length(d));
-        k += 1;
-    }
-    out
-}
-
-pub(super) fn run_divide(s: &mut Session, p: &Value) -> Result<Value> {
-    let h = targets(s, p)?.first().copied().ok_or_else(|| bad("divide", "`handle` is required"))?;
-    let n = p.get("segments").and_then(Value::as_u64).ok_or_else(|| bad("divide", "`segments` (2..32767) is required"))?;
-    if !(2..=32767).contains(&n) {
-        return Err(bad("divide", "segments must be 2..32767"));
-    }
-    let block = str_param(p, "block").map(str::to_string);
-    check_block(s, block.as_deref())?;
-    let c = chain_of(s, h)?;
-    let pts = divide_points(&c, n as usize);
-    let hs = place_markers(s, &pts, block.as_deref(), bool_or(p, "align", true))?;
-    Ok(json!({ "handles": hs }))
-}
-
-pub(super) fn run_measure(s: &mut Session, p: &Value) -> Result<Value> {
-    let h = targets(s, p)?.first().copied().ok_or_else(|| bad("measure", "`handle` is required"))?;
-    let step = f64_req("measure", p, "length")?;
-    let mut c = chain_of(s, h)?;
-    if step.is_nan() || step <= 0.0 || c.len() / step > MAX_GEN as f64 {
-        return Err(bad("measure", "length must be positive (and not tiny)"));
-    }
-    let block = str_param(p, "block").map(str::to_string);
-    check_block(s, block.as_deref())?;
-    if let Some(from) = point_param(p, "from")
-        && !c.closed
-        && let (Some(a), Some(b)) = (c.start(), c.end())
-        && from.dist(b) < from.dist(a)
-    {
-        c = c.reversed();
-    }
-    let pts = measure_points(&c, step);
-    let hs = place_markers(s, &pts, block.as_deref(), bool_or(p, "align", true))?;
-    Ok(json!({ "handles": hs }))
-}
-
-#[derive(Clone, Copy, PartialEq, Eq)]
-enum DivPhase {
-    Object,
-    Value,
-    BlockName,
-    Align,
-}
-
-pub(super) struct DivideM {
-    measure: bool,
-    obj: Option<(Handle, Vec2)>,
-    phase: DivPhase,
-    block: Option<String>,
-    align: bool,
-}
-
-impl DivideM {
-    pub(super) fn new(measure: bool) -> Self {
-        DivideM { measure, obj: None, phase: DivPhase::Object, block: None, align: true }
-    }
-}
-
-impl Interactive for DivideM {
-    fn name(&self) -> &'static str {
-        if self.measure { "MEASURE" } else { "DIVIDE" }
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match self.phase {
-            DivPhase::Object => Prompt::new(if self.measure { "Select object to measure" } else { "Select object to divide" }, Accept::POINT),
-            DivPhase::Value => {
-                let m = if self.measure { "Specify length of segment" } else { "Enter the number of segments" };
-                let p = Prompt::new(m, if self.measure { Accept::POINT_OR_NUMBER } else { Accept::NUMBER });
-                let p = if self.measure { p.base_opt(self.obj.map(|o| o.1)) } else { p };
-                if self.block.is_some() { p } else { p.kw(&["Block"]) }
-            }
-            DivPhase::BlockName => Prompt::new("Enter name of block to insert", Accept::TEXT),
-            DivPhase::Align => Prompt::new("Align block with object?", curves::KW).kw(&["Yes", "No"]).default("Y"),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match (self.phase, i) {
-            (DivPhase::Object, Input::Point(p)) => {
-                let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                chain_of(s, h)?;
-                self.obj = Some((h, p));
-                self.phase = DivPhase::Value;
-                Ok(Step::Continue)
-            }
-            (DivPhase::Value, Input::Keyword(k)) if k == "Block" => {
-                self.phase = DivPhase::BlockName;
-                Ok(Step::Continue)
-            }
-            (DivPhase::BlockName, Input::Text(t) | Input::Keyword(t)) => {
-                let name = t.trim().to_string();
-                check_block(s, Some(&name))?;
-                self.block = Some(name);
-                self.phase = DivPhase::Align;
-                Ok(Step::Continue)
-            }
-            (DivPhase::Align, Input::Keyword(k) | Input::Text(k)) => {
-                self.align = !k.trim().to_ascii_lowercase().starts_with('n');
-                self.phase = DivPhase::Value;
-                Ok(Step::Continue)
-            }
-            (DivPhase::Align, Input::Enter) => {
-                self.phase = DivPhase::Value;
-                Ok(Step::Continue)
-            }
-            (DivPhase::Value, inp @ (Input::Text(_) | Input::Point(_))) => {
-                let Some((h, pick)) = self.obj else { return Ok(Step::Cancel) };
-                let v = match inp {
-                    Input::Text(t) => number(&t).ok_or_else(|| other("Requires a number."))?,
-                    Input::Point(q) => pick.dist(q),
-                    _ => return Ok(Step::Continue),
-                };
-                let mut params = json!({ "handle": h.hex(), "align": self.align, "from": [pick.x, pick.y] });
-                if let Some(b) = &self.block {
-                    params["block"] = json!(b);
-                }
-                if self.measure {
-                    params["length"] = json!(v);
-                    run_measure(s, &params)?;
-                } else {
-                    if !(2.0..=32767.0).contains(&v) || v.fract() != 0.0 {
-                        return Err(other("Requires an integer between 2 and 32767."));
-                    }
-                    params["segments"] = json!(v as u64);
-                    run_divide(s, &params)?;
-                }
-                Ok(Step::Done)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Err(other("Invalid input.")),
-        }
-    }
-}
@@ -1,60 +0,0 @@
-use super::{Ellipse, EntityKind, Line, Result, Session, TAU, Value, Vec2, added, bad, f64_req, point_param, point_req, v3};
-
-// ---------------- ellipse entries ----------------
-
-fn ellipse_from_axis(p1: Vec2, p2: Vec2, half: f64) -> Option<Ellipse> {
-    let c = p1.mid(p2);
-    let m = p2 - c;
-    let ml = m.len();
-    let half = half.abs();
-    if ml < 1e-12 || half < 1e-12 || !half.is_finite() {
-        return None;
-    }
-    Some(if half > ml { Ellipse::full(c, m.normalized().perp() * half, ml / half) } else { Ellipse::full(c, m, half / ml) })
-}
-
-fn axis_ellipse_params(cmd: &str, p: &Value) -> Result<Ellipse> {
-    let p1 = point_req(cmd, p, "p1")?;
-    let p2 = point_req(cmd, p, "p2")?;
-    let half = match point_param(p, "p3") {
-        Some(p3) => {
-            let ax = Line::new(p1, p2);
-            ax.project(p3).dist(p3)
-        }
-        None => f64_req(cmd, p, "distance")?,
-    };
-    ellipse_from_axis(p1, p2, half).ok_or_else(|| bad(cmd, "degenerate ellipse"))
-}
-
-fn ellipse_kind(e: &Ellipse) -> EntityKind {
-    EntityKind::Ellipse(cadcraft_doc::Ellipse { center: v3(e.center), major: v3(e.major), ratio: e.ratio, start: e.start, end: e.end })
-}
-
-pub(super) fn run_ellipse_axis(s: &mut Session, p: &Value) -> Result<Value> {
-    let e = axis_ellipse_params("ellipse.axis", p)?;
-    added(s.add_entity(ellipse_kind(&e))?)
-}
-
-pub(super) fn run_ellipse_arc(s: &mut Session, p: &Value) -> Result<Value> {
-    let mut e = if let Some(c) = point_param(p, "center") {
-        let m = point_req("ellipse.arc", p, "major")?;
-        let ratio = f64_req("ellipse.arc", p, "ratio")?;
-        if !(ratio > 0.0 && ratio <= 1.0) || m.len() < 1e-12 {
-            return Err(bad("ellipse.arc", "ratio must be in (0, 1] and major non-zero"));
-        }
-        Ellipse::full(c, m, ratio)
-    } else {
-        axis_ellipse_params("ellipse.arc", p)?
-    };
-    // Angles are measured from the major axis (like the prompts); convert to parameters.
-    let to_param = |deg: f64| {
-        let a = deg.to_radians();
-        let ge = Ellipse { start: 0.0, end: TAU, ..e };
-        ge.param_of(e.center + Vec2::from_angle(a + e.major.angle()))
-    };
-    let st = to_param(f64_req("ellipse.arc", p, "start")?);
-    let en = to_param(f64_req("ellipse.arc", p, "end")?);
-    e.start = st;
-    e.end = en;
-    added(s.add_entity(ellipse_kind(&e))?)
-}
@@ -1,311 +0,0 @@
-use super::{
-    Accept, EntityKind, Input, Interactive, PolyVertex, Prompt, Result, Session, Step, Value, Vec2, added, bad, bool_or, curves, f64_or, lwpoly,
-    number, other, point_param, point_req, rect_with_corners, size_param,
-};
-
-// =====================================================================================
-// RECTANG with Area / Dimensions / Rotation / Width / Elevation / Thickness
-// =====================================================================================
-
-fn rect_kind(first: Vec2, (w, h): (f64, f64), rot: f64, fillet: f64, chamfer: (f64, f64), width: f64, elevation: f64) -> EntityKind {
-    let local = rect_with_corners(Vec2::ZERO, Vec2::new(w, h), fillet, chamfer);
-    let vs = local.into_iter().map(|v| PolyVertex { p: first + v.p.rotate(rot), ..v }).collect();
-    let mut k = lwpoly(vs, true);
-    if let EntityKind::LwPolyline(pl) = &mut k {
-        pl.const_width = width.max(0.0);
-        pl.elevation = elevation;
-    }
-    k
-}
-
-/// The width and height of a rectangle from its `dimensions`, its `p2` corner, its `area` with
-/// `length` or `breadth`, or its second corner `p2`, rotated by `rot` about `a`.
-fn rect_size(p: &Value, a: Vec2, rot: f64, centered: bool) -> Result<(f64, f64)> {
-    Ok(if let Some(d) = p.get("dimensions").and_then(Value::as_array) {
-        let l = d.first().and_then(Value::as_f64).filter(|v| v.is_finite()).ok_or_else(|| bad("rectang", "dimensions: [length, width]"))?;
-        let wd = d.get(1).and_then(Value::as_f64).filter(|v| v.is_finite()).ok_or_else(|| bad("rectang", "dimensions: [length, width]"))?;
-        let (sx, sy) = match point_param(p, "p2") {
-            Some(q) => {
-                let loc = (q - a).rotate(-rot);
-                (if loc.x < 0.0 { -1.0 } else { 1.0 }, if loc.y < 0.0 { -1.0 } else { 1.0 })
-            }
-            None => (1.0, 1.0),
-        };
-        (l.abs() * sx, wd.abs() * sy)
-    } else if let Some(area) = p.get("area").and_then(Value::as_f64).filter(|v| v.is_finite()) {
-        if area <= 0.0 {
-            return Err(bad("rectang", "area must be positive"));
-        }
-        match (p.get("length").and_then(Value::as_f64), p.get("breadth").and_then(Value::as_f64)) {
-            (Some(l), _) if l.is_finite() && l > 0.0 => (l, area / l),
-            (_, Some(b)) if b.is_finite() && b > 0.0 => (area / b, b),
-            _ => return Err(bad("rectang", "area needs `length` or `breadth`")),
-        }
-    } else {
-        let b = point_req("rectang", p, "p2")?;
-        let loc = (b - a).rotate(-rot);
-        // In centre mode the picked point is one corner, mirrored across the centre.
-        if centered { (2.0 * loc.x, 2.0 * loc.y) } else { (loc.x, loc.y) }
-    })
-}
-
-/// Draws a rectangle from the JSON form: `p1` is a corner, or the centre when `center` is
-/// true, and the size comes from `p2`, `dimensions` or `area` plus `length`/`breadth`.
-pub(crate) fn run_rectang2(s: &mut Session, p: &Value) -> Result<Value> {
-    let a = point_req("rectang", p, "p1")?;
-    // Centre mode: `p1` is the rectangle's centre, so the rectangle spans it evenly.
-    let centered = bool_or(p, "center", false);
-    let rot = f64_or(p, "rotation", 0.0).to_radians();
-    let ch = p
-        .get("chamfer")
-        .and_then(Value::as_array)
-        .map(|c| (c.first().and_then(Value::as_f64).unwrap_or(0.0), c.get(1).and_then(Value::as_f64).unwrap_or(0.0)))
-        .map(|(x, y)| (if x.is_finite() { x } else { 0.0 }, if y.is_finite() { y } else { 0.0 }))
-        .unwrap_or((0.0, 0.0));
-    if ch.0 < 0.0 || ch.1 < 0.0 {
-        return Err(bad("rectang", "`chamfer` distances must be zero or positive"));
-    }
-    let fillet = size_param("rectang", p, "fillet", true)?.unwrap_or(0.0);
-    let width = size_param("rectang", p, "width", true)?.unwrap_or(0.0);
-    let (w, h) = rect_size(p, a, rot, centered)?;
-    if w.abs() < 1e-12 || h.abs() < 1e-12 || !w.is_finite() || !h.is_finite() {
-        return Err(bad("rectang", "rectangle has no area"));
-    }
-    let first = if centered { a - Vec2::new(w / 2.0, h / 2.0).rotate(rot) } else { a };
-    let k = rect_kind(first, (w, h), rot, fillet, ch, width, f64_or(p, "elevation", 0.0));
-    let hd = s.add_entity(k)?;
-    // A rectangle has its own thickness option and does not take THICKNESS.
-    let th = f64_or(p, "thickness", 0.0);
-    s.doc_mut()?.modify_entity(hd, |e| e.common.thickness = th)?;
-    added(hd)
-}
-
-#[derive(Clone, Copy, Debug, PartialEq)]
-enum RAsk {
-    Chamfer1,
-    Chamfer2,
-    Fillet,
-    Width,
-    Elevation,
-    Thickness,
-    Area,
-    AreaBasis,
-    AreaLength,
-    AreaWidth,
-    DimL,
-    DimW,
-    Rotation,
-    RotPick1,
-    RotPick2(Vec2),
-}
-
-#[derive(Default)]
-pub(crate) struct RectM2 {
-    first: Option<Vec2>,
-    /// The first point is the rectangle's centre (the `Center` option), not a corner.
-    center: bool,
-    fillet: f64,
-    chamfer: (f64, f64),
-    width: f64,
-    elevation: f64,
-    thickness: f64,
-    rotation: f64,
-    dims: Option<(f64, f64)>,
-    area: f64,
-    asking: Option<RAsk>,
-}
-
-impl RectM2 {
-    /// Adds the rectangle of full size `w` × `h` with the collected options, drawing it from
-    /// the centre when centre mode is on, then applies the requested thickness.
-    fn make(&self, s: &mut Session, w: f64, h: f64) -> Result<Step> {
-        let Some(a) = self.first else { return Ok(Step::Cancel) };
-        if w.abs() < 1e-12 || h.abs() < 1e-12 {
-            return Err(other("The rectangle has no area."));
-        }
-        let first = self.origin(w, h).unwrap_or(a);
-        let hd = s.add_entity(rect_kind(first, (w, h), self.rotation, self.fillet, self.chamfer, self.width, self.elevation))?;
-        // A rectangle has its own thickness option and does not take THICKNESS.
-        let t = self.thickness;
-        s.doc_mut()?.modify_entity(hd, |e| e.common.thickness = t)?;
-        Ok(Step::Done)
-    }
-    /// The rectangle's local origin (the corner `rect_kind` draws from) for a size: the first
-    /// point itself as a corner, or the first point less half the size around the centre.
-    fn origin(&self, w: f64, h: f64) -> Option<Vec2> {
-        let a = self.first?;
-        Some(if self.center { a - Vec2::new(w / 2.0, h / 2.0).rotate(self.rotation) } else { a })
-    }
-    /// The rectangle's signed full size implied by the picked point `p`: explicit `dims` only
-    /// take their quadrant from `p`, otherwise `p` is a corner, doubled about the centre in
-    /// centre mode.
-    fn other_corner(&self, p: Vec2) -> Option<(f64, f64)> {
-        let a = self.first?;
-        let loc = (p - a).rotate(-self.rotation);
-        Some(match self.dims {
-            Some((l, w)) => (if loc.x < 0.0 { -l } else { l }, if loc.y < 0.0 { -w } else { w }),
-            // In centre mode the picked point is one corner, mirrored across the centre.
-            None if self.center => (2.0 * loc.x, 2.0 * loc.y),
-            None => (loc.x, loc.y),
-        })
-    }
-}
-
-impl Interactive for RectM2 {
-    fn name(&self) -> &'static str {
-        "RECTANG"
-    }
-    /// Asks for the pending option's value, or for the first and second points; in centre mode
-    /// the first prompt asks for the centre instead of a corner.
-    fn prompt(&self, _s: &Session) -> Prompt {
-        let num = |m: &str, d: f64| Prompt::new(m, Accept::NUMBER).default(format!("{d:.4}"));
-        if let Some(a) = self.asking {
-            return match a {
-                RAsk::Chamfer1 => num("Specify first chamfer distance for rectangles", self.chamfer.0),
-                RAsk::Chamfer2 => num("Specify second chamfer distance for rectangles", self.chamfer.1),
-                RAsk::Fillet => num("Specify fillet radius for rectangles", self.fillet),
-                RAsk::Width => num("Specify line width for rectangles", self.width),
-                RAsk::Elevation => num("Specify the elevation for rectangles", self.elevation),
-                RAsk::Thickness => num("Specify thickness for rectangles", self.thickness),
-                RAsk::Area => num("Enter area of rectangle in current units", if self.area > 0.0 { self.area } else { 100.0 }),
-                RAsk::AreaBasis => Prompt::new("Calculate rectangle dimensions based on", curves::KW).kw(&["Length", "Width"]).default("Length"),
-                RAsk::AreaLength => num("Enter rectangle length", 10.0),
-                RAsk::AreaWidth => num("Enter rectangle width", 10.0),
-                RAsk::DimL => num("Specify length for rectangles", self.dims.map(|d| d.0).unwrap_or(10.0)),
-                RAsk::DimW => num("Specify width for rectangles", self.dims.map(|d| d.1).unwrap_or(10.0)),
-                RAsk::Rotation => Prompt::new("Specify rotation angle or", Accept::POINT_OR_NUMBER)
-                    .kw(&["Pick points"])
-                    .default(format!("{:.0}", self.rotation.to_degrees()))
-                    .base_opt(self.first),
-                RAsk::RotPick1 => Prompt::new("Specify first point", Accept::POINT),
-                RAsk::RotPick2(b) => Prompt::new("Specify second point", Accept::POINT).base(b),
-            };
-        }
-        match self.first {
-            None => {
-                let msg = if self.center { "Specify center point for rectangle" } else { "Specify first corner point" };
-                Prompt::new(msg, Accept::POINT).kw(&["Chamfer", "CEnter", "Elevation", "Fillet", "Thickness", "Width"])
-            }
-            Some(p) => Prompt::new("Specify other corner point", Accept::POINT).kw(&["Area", "Dimensions", "Rotation"]).corner(p),
-        }
-    }
-    /// Consumes one input: option keywords (`Center` only switches the first point's meaning
-    /// to the centre and asks nothing), option values, and the points that size the rectangle.
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if let Some(a) = self.asking {
-            let val = |i: &Input, default: f64| -> Result<f64> {
-                match i {
-                    Input::Text(t) => number(t).ok_or_else(|| other("Requires a number.")),
-                    Input::Enter => Ok(default),
-                    _ => Err(other("Requires a number.")),
-                }
-            };
-            self.asking = None;
-            match a {
-                RAsk::Chamfer1 => {
-                    self.chamfer.0 = val(&i, self.chamfer.0)?.max(0.0);
-                    self.chamfer.1 = self.chamfer.0;
-                    self.asking = Some(RAsk::Chamfer2);
-                }
-                RAsk::Chamfer2 => self.chamfer.1 = val(&i, self.chamfer.1)?.max(0.0),
-                RAsk::Fillet => self.fillet = val(&i, self.fillet)?.max(0.0),
-                RAsk::Width => self.width = val(&i, self.width)?.max(0.0),
-                RAsk::Elevation => self.elevation = val(&i, self.elevation)?,
-                RAsk::Thickness => self.thickness = val(&i, self.thickness)?,
-                RAsk::Area => {
-                    let v = val(&i, if self.area > 0.0 { self.area } else { 100.0 })?;
-                    if v <= 0.0 {
-                        self.asking = Some(RAsk::Area);
-                        return Err(other("Value must be positive."));
-                    }
-                    self.area = v;
-                    self.asking = Some(RAsk::AreaBasis);
-                }
-                RAsk::AreaBasis => {
-                    let w = matches!(&i, Input::Keyword(k) | Input::Text(k) if k.to_ascii_lowercase().starts_with('w'));
-                    self.asking = Some(if w { RAsk::AreaWidth } else { RAsk::AreaLength });
-                }
-                RAsk::AreaLength | RAsk::AreaWidth => {
-                    let v = val(&i, 10.0)?;
-                    if v <= 0.0 {
-                        self.asking = Some(a);
-                        return Err(other("Value must be positive."));
-                    }
-                    let (w, h) = if a == RAsk::AreaLength { (v, self.area / v) } else { (self.area / v, v) };
-                    return self.make(s, w, h);
-                }
-                RAsk::DimL => {
-                    let l = val(&i, self.dims.map(|d| d.0).unwrap_or(10.0))?.abs();
-                    self.dims = Some((l, self.dims.map(|d| d.1).unwrap_or(10.0)));
-                    self.asking = Some(RAsk::DimW);
-                }
-                RAsk::DimW => {
-                    let w = val(&i, self.dims.map(|d| d.1).unwrap_or(10.0))?.abs();
-                    self.dims = Some((self.dims.map(|d| d.0).unwrap_or(10.0), w));
-                }
-                RAsk::Rotation => match i {
-                    Input::Keyword(_) => self.asking = Some(RAsk::RotPick1),
-                    Input::Point(p) => self.rotation = self.first.map(|f| f.angle_to(p)).unwrap_or(0.0),
-                    Input::Text(t) => self.rotation = s.angle_settings().direction(&t).ok_or_else(|| other("Requires a valid angle."))?,
-                    _ => {}
-                },
-                RAsk::RotPick1 => {
-                    if let Input::Point(p) = i {
-                        self.asking = Some(RAsk::RotPick2(p));
-                    }
-                }
-                RAsk::RotPick2(b) => {
-                    if let Input::Point(p) = i {
-                        self.rotation = b.angle_to(p);
-                    }
-                }
-            }
-            return Ok(Step::Continue);
-        }
-        match i {
-            Input::Keyword(k) => {
-                // `Center` only switches the first point's meaning; it asks nothing.
-                if k == "CEnter" {
-                    self.center = true;
-                    return Ok(Step::Continue);
-                }
-                self.asking = Some(match k.as_str() {
-                    "Chamfer" => RAsk::Chamfer1,
-                    "Elevation" => RAsk::Elevation,
-                    "Fillet" => RAsk::Fillet,
-                    "Thickness" => RAsk::Thickness,
-                    "Width" => RAsk::Width,
-                    "Area" => RAsk::Area,
-                    "Dimensions" => RAsk::DimL,
-                    _ => RAsk::Rotation,
-                });
-                Ok(Step::Continue)
-            }
-            Input::Point(p) => match self.first {
-                None => {
-                    self.first = Some(p);
-                    Ok(Step::Continue)
-                }
-                Some(_) => {
-                    let (w, h) = self.other_corner(p).ok_or_else(|| other("No first corner."))?;
-                    self.make(s, w, h)
-                }
-            },
-            Input::Enter => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    /// The rubber-band rectangle for the cursor at `c`, mapped through the same size-and-origin
-    /// rules as the committed entity so centre mode previews where it will land.
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.asking.is_some() {
-            return Vec::new();
-        }
-        match self.other_corner(c).and_then(|(w, h)| self.origin(w, h).map(|a| (a, w, h))) {
-            Some((a, w, h)) if w.abs() > 1e-12 && h.abs() > 1e-12 => {
-                vec![rect_kind(a, (w, h), self.rotation, self.fillet, self.chamfer, self.width, self.elevation)]
-            }
-            _ => Vec::new(),
-        }
-    }
-}
@@ -1,276 +0,0 @@
-use super::{
-    Accept, Chain, Circle, Ellipse, EntityKind, Handle, Input, Interactive, Line, MAX_GEN, PolyVertex, Polyline, Prompt, Result, Session, Step,
-    Value, Vec2, added, bad, bool_or, curves, lwpoly, number, other, point_param, points_param, rect_vertices, shoelace, str_param,
-};
-
-// =====================================================================================
-// REVCLOUD
-// =====================================================================================
-
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub(super) enum CloudKind {
-    Rect,
-    Poly,
-    Free,
-}
-
-fn default_arc_len(s: &Session) -> f64 {
-    let d = s.doc().ok();
-    let metric = d.is_some_and(|d| d.header.i64("MEASUREMENT", 0) == 1);
-    d.map(|d| d.header.f64("REVCLOUDARCLEN", if metric { 15.0 } else { 0.5 })).unwrap_or(0.5).max(1e-6)
-}
-
-/// Bulged closed polyline vertices for a revision cloud around `boundary`.
-pub(crate) fn cloud_vertices(boundary: &[Vec2], arc_len: f64, per_edge: bool, reverse: bool) -> Option<Vec<PolyVertex>> {
-    let mut pts: Vec<Vec2> = Vec::new();
-    for p in boundary {
-        if p.is_finite() && pts.last().is_none_or(|l| !l.near(*p, 1e-9)) {
-            pts.push(*p);
-        }
-    }
-    while pts.len() > 1 && pts.first().zip(pts.last()).is_some_and(|(a, b)| a.near(*b, 1e-9)) {
-        pts.pop();
-    }
-    if pts.len() < 3 || shoelace(&pts).abs() < 1e-12 {
-        return None;
-    }
-    if shoelace(&pts) < 0.0 {
-        pts.reverse();
-    }
-    let n = pts.len();
-    let perim: f64 = (0..n).filter_map(|i| Some(pts.get(i)?.dist(*pts.get((i + 1) % n)?))).sum();
-    if !(arc_len.is_finite() && arc_len > 0.0) {
-        return None;
-    }
-    let arc_len = arc_len.max(perim / MAX_GEN as f64);
-    let mut out: Vec<Vec2> = Vec::new();
-    if per_edge {
-        for i in 0..n {
-            let (Some(a), Some(b)) = (pts.get(i).copied(), pts.get((i + 1) % n).copied()) else { continue };
-            let k = ((a.dist(b) / arc_len).round() as usize).clamp(1, MAX_GEN);
-            for j in 0..k {
-                out.push(a.lerp(b, j as f64 / k as f64));
-            }
-        }
-    } else {
-        let chain = Chain {
-            segs: (0..n).filter_map(|i| Some(cadcraft_geom::Segment::Line(Line::new(*pts.get(i)?, *pts.get((i + 1) % n)?)))).collect(),
-            closed: true,
-        };
-        let k = ((perim / arc_len).round() as usize).clamp(3, MAX_GEN);
-        for j in 0..k {
-            out.extend(chain.at_length(perim * j as f64 / k as f64).map(|x| x.0));
-        }
-    }
-    let b = if reverse { -0.5 } else { 0.5 };
-    Some(out.into_iter().map(|p| PolyVertex::with_bulge(p, b)).collect())
-}
-
-fn object_outline(s: &Session, h: Handle) -> Result<Vec<Vec2>> {
-    let e = curves::entity(s, h)?;
-    let tol = 1e-3;
-    let pts = match &e.kind {
-        EntityKind::LwPolyline(p) if p.closed => Polyline { vertices: p.vertices.clone(), closed: true }.tessellate(tol),
-        EntityKind::Circle(c) => {
-            let mut v = Vec::new();
-            Circle::new(c.center.xy(), c.radius).tessellate(c.radius * 1e-3, &mut v);
-            v
-        }
-        EntityKind::Ellipse(el) => {
-            let mut v = Vec::new();
-            Ellipse { center: el.center.xy(), major: el.major.xy(), ratio: el.ratio, start: el.start, end: el.end }
-                .tessellate(el.major.xy().len() * 1e-3, &mut v);
-            v
-        }
-        EntityKind::Spline(sp) if sp.closed => sp.tessellate(tol),
-        _ => return Err(other("Select a closed polyline, circle, ellipse or closed spline.")),
-    };
-    Ok(pts)
-}
-
-fn cloud_entity(vs: Vec<PolyVertex>, calligraphy: bool, arc_len: f64) -> EntityKind {
-    let vs = if calligraphy { vs.into_iter().map(|v| PolyVertex { start_width: 0.0, end_width: arc_len * 0.15, ..v }).collect() } else { vs };
-    lwpoly(vs, true)
-}
-
-pub(super) fn run_revcloud(s: &mut Session, p: &Value) -> Result<Value> {
-    let arc_len = p.get("arcLength").and_then(Value::as_f64).filter(|v| v.is_finite() && *v > 0.0).unwrap_or_else(|| default_arc_len(s));
-    let reverse = bool_or(p, "reverse", false);
-    let calligraphy = str_param(p, "style").is_some_and(|x| x.eq_ignore_ascii_case("calligraphy"));
-    let (pts, per_edge, src) = if let (Some(a), Some(b)) = (point_param(p, "p1"), point_param(p, "p2")) {
-        (rect_vertices(a, b).into_iter().map(|v| v.p).collect(), true, None)
-    } else if let Some(pts) = points_param(p, "points") {
-        (pts, true, None)
-    } else if let Some(pts) = points_param(p, "freehand") {
-        (pts, false, None)
-    } else if let Some(h) = curves::handle_param(p, "handle") {
-        (object_outline(s, h)?, false, Some(h))
-    } else {
-        return Err(bad("revcloud", "give {p1, p2}, {points}, {freehand} or {handle}"));
-    };
-    if pts.len() > MAX_GEN {
-        return Err(bad("revcloud", "too many points"));
-    }
-    let vs = cloud_vertices(&pts, arc_len, per_edge, reverse).ok_or_else(|| bad("revcloud", "the boundary needs an area"))?;
-    let h = s.add_entity(cloud_entity(vs, calligraphy, arc_len))?;
-    if let Some(src) = src {
-        let common = curves::entity(s, src)?.common;
-        let d = s.doc_mut()?;
-        d.modify_entity(h, |e| e.common = common)?;
-        d.remove_entity(src);
-    }
-    added(h)
-}
-
-pub(super) struct RevcloudM {
-    kind: CloudKind,
-    pts: Vec<Vec2>,
-    arc_len: f64,
-    asking_arc: bool,
-    object: bool,
-    calligraphy: bool,
-    asking_style: bool,
-}
-
-impl RevcloudM {
-    pub(super) fn new(s: &Session, kind: CloudKind) -> Self {
-        RevcloudM { kind, pts: Vec::new(), arc_len: default_arc_len(s), asking_arc: false, object: false, calligraphy: false, asking_style: false }
-    }
-    fn boundary(&self, extra: Option<Vec2>) -> Vec<Vec2> {
-        let mut pts = self.pts.clone();
-        pts.extend(extra);
-        if self.kind == CloudKind::Rect
-            && let (Some(a), Some(b)) = (pts.first().copied(), pts.get(1).copied())
-        {
-            return rect_vertices(a, b).into_iter().map(|v| v.p).collect();
-        }
-        pts
-    }
-    fn finish(&mut self, s: &mut Session) -> Result<Step> {
-        let b = self.boundary(None);
-        match cloud_vertices(&b, self.arc_len, self.kind != CloudKind::Free, false) {
-            Some(vs) => {
-                s.add_entity(cloud_entity(vs, self.calligraphy, self.arc_len))?;
-                s.echo("Revision cloud finished.");
-                Ok(Step::Done)
-            }
-            None => Err(other("The revision cloud needs at least three points enclosing an area.")),
-        }
-    }
-}
-
-impl Interactive for RevcloudM {
-    fn name(&self) -> &'static str {
-        "REVCLOUD"
-    }
-    fn begin(&mut self, s: &mut Session) -> Result<Step> {
-        let t = match self.kind {
-            CloudKind::Rect => "Rectangular",
-            CloudKind::Poly => "Polygonal",
-            CloudKind::Free => "Freehand",
-        };
-        s.echo(format!("Minimum arc length: {0:.4}   Maximum arc length: {0:.4}   Style: Normal   Type: {t}", self.arc_len));
-        Ok(Step::Continue)
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        if self.asking_arc {
-            return Prompt::new("Specify minimum length of arc", Accept::NUMBER).default(format!("{:.4}", self.arc_len));
-        }
-        if self.asking_style {
-            return Prompt::new("Select arc style", curves::KW).kw(&["Normal", "Calligraphy"]).default("Normal");
-        }
-        if self.object {
-            return Prompt::new("Select object", Accept::POINT);
-        }
-        let first_kw: &[&str] = &["Arc length", "Object", "Rectangular", "Polygonal", "Freehand", "Style"];
-        match (self.kind, self.pts.len()) {
-            (CloudKind::Rect, 0) => Prompt::new("Specify first corner point", Accept::POINT).kw(first_kw).default("Object"),
-            (CloudKind::Rect, _) => {
-                Prompt { corner: true, ..Prompt::new("Specify opposite corner", Accept::POINT).base_opt(self.pts.first().copied()) }
-            }
-            (CloudKind::Poly, 0) => Prompt::new("Specify start point", Accept::POINT).kw(first_kw).default("Object"),
-            (CloudKind::Poly, 1) => Prompt::new("Specify next point", Accept::POINT).base_opt(self.pts.last().copied()),
-            (CloudKind::Poly, _) => Prompt::new("Specify next point", Accept::POINT).kw(&["Undo"]).base_opt(self.pts.last().copied()),
-            (CloudKind::Free, 0) => Prompt::new("Specify first point", Accept::POINT).kw(first_kw).default("Object"),
-            (CloudKind::Free, _) => Prompt::new("Guide crosshairs along cloud path", Accept::POINT).base_opt(self.pts.last().copied()),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        if self.asking_arc {
-            if let Input::Text(t) = &i {
-                let v = number(t).filter(|v| *v > 0.0).ok_or_else(|| other("Requires a positive value."))?;
-                self.arc_len = v;
-                s.doc_mut()?.header.set_f64("REVCLOUDARCLEN", v);
-            }
-            self.asking_arc = false;
-            return Ok(Step::Continue);
-        }
-        if self.asking_style {
-            if let Input::Keyword(k) | Input::Text(k) = &i {
-                self.calligraphy = k.to_ascii_lowercase().starts_with('c');
-            }
-            self.asking_style = false;
-            return Ok(Step::Continue);
-        }
-        if self.object {
-            let Input::Point(p) = i else { return if i == Input::Enter { Ok(Step::Cancel) } else { Ok(Step::Continue) } };
-            let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-            let pts = object_outline(s, h)?;
-            let vs = cloud_vertices(&pts, self.arc_len, false, false).ok_or_else(|| other("The object has no area."))?;
-            let nh = s.add_entity(cloud_entity(vs, self.calligraphy, self.arc_len))?;
-            let common = curves::entity(s, h)?.common;
-            let d = s.doc_mut()?;
-            d.modify_entity(nh, |e| e.common = common)?;
-            d.remove_entity(h);
-            s.echo("Revision cloud finished.");
-            return Ok(Step::Done);
-        }
-        match i {
-            Input::Keyword(k) => {
-                match k.as_str() {
-                    "Arc length" => self.asking_arc = true,
-                    "Object" => self.object = true,
-                    "Rectangular" => self.kind = CloudKind::Rect,
-                    "Polygonal" => self.kind = CloudKind::Poly,
-                    "Freehand" => self.kind = CloudKind::Free,
-                    "Style" => self.asking_style = true,
-                    "Undo" => {
-                        self.pts.pop();
-                    }
-                    _ => {}
-                }
-                Ok(Step::Continue)
-            }
-            Input::Point(p) => {
-                self.pts.push(p);
-                if self.kind == CloudKind::Rect && self.pts.len() == 2 {
-                    return self.finish(s);
-                }
-                if self.pts.len() > MAX_GEN {
-                    return self.finish(s);
-                }
-                Ok(Step::Continue)
-            }
-            Input::Enter if self.pts.is_empty() => {
-                self.object = true;
-                Ok(Step::Continue)
-            }
-            Input::Enter => self.finish(s),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.pts.is_empty() || self.object {
-            return Vec::new();
-        }
-        let b = self.boundary(Some(c));
-        match cloud_vertices(&b, self.arc_len, self.kind != CloudKind::Free, false) {
-            Some(vs) if vs.len() < 2000 => vec![lwpoly(vs, true)],
-            _ => {
-                let mut pts = self.pts.clone();
-                pts.push(c);
-                vec![lwpoly(pts.into_iter().map(PolyVertex::new).collect(), false)]
-            }
-        }
-    }
-}
@@ -1,140 +0,0 @@
-use super::{
-    Accept, Circle, Handle, Input, Interactive, Prompt, Result, Session, Step, TanObj, Value, Vec2, added, bad, circle, curves, f64_req, number,
-    other, point_param, point_req,
-};
-
-pub(super) fn run_circle_variant(s: &mut Session, p: &Value) -> Result<Value> {
-    let c = if let (Some(c), Some(d)) = (point_param(p, "center"), p.get("diameter").and_then(Value::as_f64)) {
-        Circle::new(c, d / 2.0)
-    } else if let (Some(a), Some(b)) = (point_param(p, "p1"), point_param(p, "p2")) {
-        match point_param(p, "p3") {
-            Some(c3) => Circle::from_3_points(a, b, c3).ok_or_else(|| bad("circle", "points are collinear"))?,
-            None => Circle::from_2_points(a, b),
-        }
-    } else {
-        return Err(bad("circle", "give {center, diameter}, {p1, p2} or {p1, p2, p3}"));
-    };
-    if !(c.radius > 1e-12 && c.radius.is_finite()) {
-        return Err(bad("circle", "radius must be positive"));
-    }
-    let h = s.add_entity(circle(c.center, c.radius))?;
-    s.doc_mut()?.header.set_f64("CIRCLERAD", c.radius);
-    added(h)
-}
-
-// ---------------- tangent circles ----------------
-
-fn tan_obj(s: &Session, h: Handle, pick: Vec2) -> Result<TanObj> {
-    let e = curves::entity(s, h)?;
-    TanObj::from_kind(&e.kind, pick).ok_or_else(|| other("Select a line, circle, arc or polyline segment."))
-}
-
-fn pick_pair(cmd: &str, p: &Value, hk: &str, pk: &str) -> Result<(Handle, Vec2)> {
-    let h = curves::handle_param(p, hk).ok_or_else(|| bad(cmd, format!("`{hk}` is required")))?;
-    let q = point_req(cmd, p, pk)?;
-    Ok((h, q))
-}
-
-pub(super) fn run_circle_ttr(s: &mut Session, p: &Value) -> Result<Value> {
-    let (h1, p1) = pick_pair("circle.ttr", p, "h1", "p1")?;
-    let (h2, p2) = pick_pair("circle.ttr", p, "h2", "p2")?;
-    let r = f64_req("circle.ttr", p, "radius")?;
-    let c = curves::ttr(tan_obj(s, h1, p1)?, p1, tan_obj(s, h2, p2)?, p2, r).ok_or_else(|| other("Circle does not exist."))?;
-    let h = s.add_entity(circle(c.center, c.radius))?;
-    s.doc_mut()?.header.set_f64("CIRCLERAD", c.radius);
-    added(h)
-}
-
-pub(super) fn run_circle_ttt(s: &mut Session, p: &Value) -> Result<Value> {
-    let (h1, p1) = pick_pair("circle.ttt", p, "h1", "p1")?;
-    let (h2, p2) = pick_pair("circle.ttt", p, "h2", "p2")?;
-    let (h3, p3) = pick_pair("circle.ttt", p, "h3", "p3")?;
-    let objs = [(tan_obj(s, h1, p1)?, p1), (tan_obj(s, h2, p2)?, p2), (tan_obj(s, h3, p3)?, p3)];
-    let c = curves::ttt(objs).ok_or_else(|| other("Circle does not exist."))?;
-    added(s.add_entity(circle(c.center, c.radius))?)
-}
-
-/// TTR (two picks + radius) or TTT (three picks). Also used by CIRCLE's `Ttr` option.
-pub(crate) struct TanCircleM {
-    radius_mode: bool,
-    picks: Vec<(TanObj, Vec2)>,
-}
-
-impl TanCircleM {
-    pub(crate) fn new(radius_mode: bool) -> Self {
-        TanCircleM { radius_mode, picks: Vec::new() }
-    }
-}
-
-impl Interactive for TanCircleM {
-    fn name(&self) -> &'static str {
-        "CIRCLE"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        let n = self.picks.len();
-        if self.radius_mode {
-            match n {
-                0 => Prompt::new("Specify point on object for first tangent of circle", Accept::POINT),
-                1 => Prompt::new("Specify point on object for second tangent of circle", Accept::POINT),
-                _ => {
-                    let r = s.doc().map(|d| d.header.f64("CIRCLERAD", 0.0)).unwrap_or(0.0);
-                    let p = Prompt::new("Specify radius of circle", Accept::POINT_OR_NUMBER).base_opt(self.picks.last().map(|x| x.1)).distance();
-                    if r > 0.0 { p.default(format!("{r:.4}")) } else { p }
-                }
-            }
-        } else {
-            let m = ["Specify first point on circle: _tan to", "Specify second point on circle: _tan to", "Specify third point on circle: _tan to"];
-            Prompt::new(m.get(n).copied().unwrap_or(""), Accept::POINT)
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        let need = if self.radius_mode { 2 } else { 3 };
-        if self.picks.len() < need {
-            return match i {
-                Input::Point(p) => {
-                    let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                    let o = tan_obj(s, h, p)?;
-                    self.picks.push((o, p));
-                    if !self.radius_mode && self.picks.len() == 3 {
-                        let (Some(a), Some(b), Some(c)) = (self.picks.first(), self.picks.get(1), self.picks.get(2)) else {
-                            return Ok(Step::Cancel);
-                        };
-                        let c = curves::ttt([*a, *b, *c]).ok_or_else(|| {
-                            self.picks.clear();
-                            other("Circle does not exist.")
-                        })?;
-                        s.add_entity(circle(c.center, c.radius))?;
-                        return Ok(Step::Done);
-                    }
-                    Ok(Step::Continue)
-                }
-                Input::Enter => Ok(Step::Cancel),
-                _ => Err(other("Select an object.")),
-            };
-        }
-        let r = match i {
-            Input::Point(p) => self.picks.last().map(|x| x.1.dist(p)).unwrap_or(0.0),
-            Input::Text(t) => number(&t).ok_or_else(|| other("Requires numeric distance or second point."))?,
-            Input::Enter => s.doc()?.header.f64("CIRCLERAD", 0.0),
-            _ => return Ok(Step::Continue),
-        };
-        if r.is_nan() || r <= 0.0 {
-            return Err(other("Value must be positive and nonzero."));
-        }
-        let ((o1, p1), (o2, p2)) = match (self.picks.first(), self.picks.get(1)) {
-            (Some(a), Some(b)) => (*a, *b),
-            _ => return Ok(Step::Cancel),
-        };
-        match curves::ttr(o1, p1, o2, p2, r) {
-            Some(c) => {
-                s.add_entity(circle(c.center, c.radius))?;
-                s.doc_mut()?.header.set_f64("CIRCLERAD", r);
-                Ok(Step::Done)
-            }
-            None => {
-                s.echo("Circle does not exist.");
-                Ok(Step::Done)
-            }
-        }
-    }
-}
@@ -1,140 +0,0 @@
-use super::{
-    Accept, EntityKind, Handle, Input, Interactive, MAX_GEN, PolyVertex, Prompt, Result, Session, Step, Value, Vec2, Wipeout, added, bad, bool_or,
-    curves, json, lwpoly, other, points_param, shoelace, str_param,
-};
-
-// =====================================================================================
-// WIPEOUT
-// =====================================================================================
-
-fn set_frames(s: &mut Session, mode: &str) -> Result<i64> {
-    let v = match mode.trim().to_ascii_lowercase().as_str() {
-        "on" | "1" => 1,
-        "off" | "0" => 0,
-        "display" | "d" | "2" | "display but not plot" => 2,
-        _ => return Err(other("Frames mode must be ON, OFF or Display.")),
-    };
-    s.doc_mut()?.header.set_i64("WIPEOUTFRAME", v);
-    Ok(v)
-}
-
-fn wipeout_from_polyline(s: &mut Session, h: Handle, erase: bool) -> Result<Handle> {
-    let e = curves::entity(s, h)?;
-    let EntityKind::LwPolyline(p) = &e.kind else { return Err(other("Select a closed polyline.")) };
-    if !p.closed || p.vertices.len() < 3 {
-        return Err(other("The polyline must be closed with at least three vertices."));
-    }
-    if p.vertices.iter().any(|v| v.bulge.abs() > 1e-12) {
-        return Err(other("Polylines with arc segments cannot be used for wipeouts."));
-    }
-    let nh = s.add_entity(EntityKind::Wipeout(Wipeout { boundary: p.vertices.iter().map(|v| v.p).collect() }))?;
-    if erase {
-        s.doc_mut()?.remove_entity(h);
-    }
-    Ok(nh)
-}
-
-pub(super) fn run_wipeout(s: &mut Session, p: &Value) -> Result<Value> {
-    if let Some(f) = str_param(p, "frames") {
-        let v = set_frames(s, f)?;
-        return Ok(json!({ "WIPEOUTFRAME": v }));
-    }
-    if let Some(h) = curves::handle_param(p, "handle") {
-        return added(wipeout_from_polyline(s, h, bool_or(p, "erase", false))?);
-    }
-    let pts = points_param(p, "points").ok_or_else(|| bad("wipeout", "`points` (3 or more) or `handle` is required"))?;
-    if pts.len() < 3 || pts.len() > MAX_GEN || shoelace(&pts).abs() < 1e-12 {
-        return Err(bad("wipeout", "need 3+ points enclosing an area"));
-    }
-    added(s.add_entity(EntityKind::Wipeout(Wipeout { boundary: pts }))?)
-}
-
-#[derive(Default)]
-pub(super) struct WipeoutM {
-    pts: Vec<Vec2>,
-    phase: u8, // 0 points, 1 select polyline, 2 erase?, 3 frames
-    poly: Option<Handle>,
-}
-
-impl Interactive for WipeoutM {
-    fn name(&self) -> &'static str {
-        "WIPEOUT"
-    }
-    fn prompt(&self, _s: &Session) -> Prompt {
-        match (self.phase, self.pts.len()) {
-            (1, _) => Prompt::new("Select a closed polyline", Accept::POINT),
-            (2, _) => Prompt::new("Erase polyline?", curves::KW).kw(&["Yes", "No"]).default("No"),
-            (3, _) => Prompt::new("Enter mode", curves::KW).kw(&["ON", "OFF", "Display but not plot"]).default("ON"),
-            (_, 0) => Prompt::new("Specify first point", Accept::POINT).kw(&["Frames", "Polyline"]).default("Polyline"),
-            (_, 1) => Prompt::new("Specify next point", Accept::POINT).base_opt(self.pts.last().copied()),
-            (_, _) => Prompt::new("Specify next point", Accept::POINT).kw(&["Undo"]).base_opt(self.pts.last().copied()),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match (self.phase, i) {
-            (1, Input::Point(p)) => {
-                let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                let e = curves::entity(s, h)?;
-                if !matches!(&e.kind, EntityKind::LwPolyline(pl) if pl.closed) {
-                    return Err(other("Select a closed polyline."));
-                }
-                self.poly = Some(h);
-                self.phase = 2;
-                Ok(Step::Continue)
-            }
-            (2, inp @ (Input::Keyword(_) | Input::Text(_) | Input::Enter)) => {
-                let erase = matches!(&inp, Input::Keyword(k) | Input::Text(k) if k.to_ascii_lowercase().starts_with('y'));
-                let h = self.poly.ok_or_else(|| other("No polyline."))?;
-                wipeout_from_polyline(s, h, erase)?;
-                Ok(Step::Done)
-            }
-            (3, inp @ (Input::Keyword(_) | Input::Text(_) | Input::Enter)) => {
-                let m = match &inp {
-                    Input::Keyword(k) | Input::Text(k) => k.clone(),
-                    _ => "on".into(),
-                };
-                let m = if m.to_ascii_lowercase().starts_with('d') { "display".to_string() } else { m };
-                set_frames(s, &m)?;
-                Ok(Step::Done)
-            }
-            (0, Input::Keyword(k)) => {
-                match k.as_str() {
-                    "Frames" => self.phase = 3,
-                    "Polyline" => self.phase = 1,
-                    "Undo" => {
-                        self.pts.pop();
-                    }
-                    _ => {}
-                }
-                Ok(Step::Continue)
-            }
-            (0, Input::Point(p)) => {
-                if self.pts.len() < MAX_GEN {
-                    self.pts.push(p);
-                }
-                Ok(Step::Continue)
-            }
-            (0, Input::Enter) if self.pts.is_empty() => {
-                self.phase = 1;
-                Ok(Step::Continue)
-            }
-            (0, Input::Enter) => {
-                if self.pts.len() < 3 || shoelace(&self.pts).abs() < 1e-12 {
-                    return Err(other("A wipeout needs three or more points enclosing an area."));
-                }
-                s.add_entity(EntityKind::Wipeout(Wipeout { boundary: self.pts.clone() }))?;
-                Ok(Step::Done)
-            }
-            (_, Input::Enter) => Ok(Step::Cancel),
-            _ => Ok(Step::Continue),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        if self.phase != 0 || self.pts.is_empty() {
-            return Vec::new();
-        }
-        let mut pts = self.pts.clone();
-        pts.push(c);
-        vec![lwpoly(pts.into_iter().map(PolyVertex::new).collect(), true)]
-    }
-}
@@ -1,263 +0,0 @@
-use super::{
-    Accept, EntityKind, Handle, Input, Interactive, Polyline, Prompt, RayLine, Result, Session, Step, Value, Vec2, added, bad, bool_or, curves,
-    f64_req, number, other, point_param, point_req, v3,
-};
-
-// =====================================================================================
-// XLINE with Hor/Ver/Ang/Bisect/Offset
-// =====================================================================================
-
-fn add_xline(s: &mut Session, base: Vec2, dir: Vec2) -> Result<Handle> {
-    let d = dir.normalized();
-    if d == Vec2::ZERO || !base.is_finite() {
-        return Err(other("Invalid direction."));
-    }
-    s.add_entity(EntityKind::XLine(RayLine { base: v3(base), dir: v3(d) }))
-}
-
-/// A line-like object for XLINE Offset/Reference: (base, direction). For a polyline, the
-/// segment nearest `pick` (the first without one), which must be straight.
-fn linear_of(s: &Session, h: Handle, pick: Option<Vec2>) -> Result<(Vec2, Vec2)> {
-    let e = curves::entity(s, h)?;
-    match &e.kind {
-        EntityKind::Line(l) => Ok((l.a.xy(), (l.b.xy() - l.a.xy()).normalized())),
-        EntityKind::XLine(r) | EntityKind::Ray(r) => Ok((r.base.xy(), r.dir.xy().normalized())),
-        EntityKind::LwPolyline(p) => {
-            let segs = Polyline { vertices: p.vertices.clone(), closed: p.closed }.segments();
-            let seg = match pick {
-                Some(q) => segs.iter().min_by(|a, b| a.closest(q).dist(q).total_cmp(&b.closest(q).dist(q))),
-                None => segs.first(),
-            };
-            match seg {
-                Some(cadcraft_geom::Segment::Line(l)) => Ok((l.a, l.dir())),
-                _ => Err(other("Select a line object.")),
-            }
-        }
-        _ => Err(other("Select a line object.")),
-    }
-}
-
-fn bisect_dir(v: Vec2, a: Vec2, b: Vec2) -> Option<Vec2> {
-    let u1 = (a - v).normalized();
-    let u2 = (b - v).normalized();
-    if u1 == Vec2::ZERO || u2 == Vec2::ZERO {
-        return None;
-    }
-    let s = u1 + u2;
-    if s.len() < 1e-12 { Some(u1.perp()) } else { Some(s.normalized()) }
-}
-
-fn offset_xline(base: Vec2, dir: Vec2, dist: f64, side: Vec2) -> (Vec2, Vec2) {
-    let n = dir.perp();
-    let sgn = if n.dot(side - base) >= 0.0 { 1.0 } else { -1.0 };
-    (base + n * (dist * sgn), dir)
-}
-
-pub(crate) fn run_xline2(s: &mut Session, p: &Value) -> Result<Value> {
-    if let (Some(v), Some(a), Some(b)) = (point_param(p, "vertex"), point_param(p, "start"), point_param(p, "end")) {
-        let d = bisect_dir(v, a, b).ok_or_else(|| bad("xline", "degenerate angle"))?;
-        return added(add_xline(s, v, d)?);
-    }
-    if let Some(h) = curves::handle_param(p, "handle") {
-        let (base, dir) = linear_of(s, h, None)?;
-        let (nb, nd) = if let Some(t) = point_param(p, "through") {
-            (t, dir)
-        } else {
-            let dist = f64_req("xline", p, "distance")?;
-            let side = point_req("xline", p, "side")?;
-            offset_xline(base, dir, dist, side)
-        };
-        return added(add_xline(s, nb, nd)?);
-    }
-    let b = point_param(p, "base").or_else(|| point_param(p, "through")).ok_or_else(|| bad("xline", "`base` is required"))?;
-    let dir = if bool_or(p, "hor", false) {
-        Vec2::X
-    } else if bool_or(p, "ver", false) {
-        Vec2::Y
-    } else if let (Some(t), Some(_)) = (point_param(p, "through"), point_param(p, "base")) {
-        t - b
-    } else {
-        Vec2::from_angle(f64_req("xline", p, "angle")?.to_radians())
-    };
-    if dir.len() < 1e-12 {
-        return Err(bad("xline", "through point equals base"));
-    }
-    added(add_xline(s, b, dir)?)
-}
-
-#[derive(Clone, Copy, Debug, Default, PartialEq)]
-enum XMode {
-    #[default]
-    Two,
-    Fixed(f64),
-    AngAsk,
-    RefSelect,
-    RefAngle(f64),
-    Bisect,
-    OffDist,
-    OffSelect,
-    OffSide,
-}
-
-#[derive(Default)]
-pub(crate) struct XlineM2 {
-    mode: XMode,
-    base: Option<Vec2>,
-    bis: Vec<Vec2>,
-    offset: Option<f64>, // None = Through
-    line: Option<(Vec2, Vec2)>,
-}
-
-impl Interactive for XlineM2 {
-    fn name(&self) -> &'static str {
-        "XLINE"
-    }
-    fn prompt(&self, s: &Session) -> Prompt {
-        match self.mode {
-            XMode::Two => match self.base {
-                None => Prompt::new("Specify a point", Accept::POINT).kw(&["Hor", "Ver", "Ang", "Bisect", "Offset"]),
-                Some(b) => Prompt::new("Specify through point", Accept::POINT).base(b),
-            },
-            XMode::Fixed(_) => Prompt::new("Specify through point", Accept::POINT),
-            XMode::AngAsk => Prompt::new("Enter angle of xline (0) or", Accept::NUMBER).kw(&["Reference"]),
-            XMode::RefSelect => Prompt::new("Select a line object", Accept::POINT),
-            XMode::RefAngle(_) => Prompt::new("Enter angle of xline", Accept::NUMBER).default("0"),
-            XMode::Bisect => match self.bis.len() {
-                0 => Prompt::new("Specify angle vertex point", Accept::POINT),
-                1 => Prompt::new("Specify angle start point", Accept::POINT).base_opt(self.bis.first().copied()),
-                _ => Prompt::new("Specify angle end point", Accept::POINT).base_opt(self.bis.first().copied()),
-            },
-            XMode::OffDist => {
-                let d = s.doc().map(|d| d.header.f64("OFFSETDIST", 1.0)).unwrap_or(1.0);
-                Prompt::new("Specify offset distance or", Accept::NUMBER).kw(&["Through"]).default(if d < 0.0 {
-                    "Through".into()
-                } else {
-                    format!("{d:.4}")
-                })
-            }
-            XMode::OffSelect => Prompt::new("Select a line object", Accept::POINT),
-            XMode::OffSide => Prompt::new(if self.offset.is_some() { "Specify side to offset" } else { "Specify through point" }, Accept::POINT),
-        }
-    }
-    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
-        match (self.mode, i) {
-            (_, Input::Enter) if matches!(self.mode, XMode::OffDist) => {
-                let d = s.doc()?.header.f64("OFFSETDIST", 1.0);
-                self.offset = (d >= 0.0).then_some(d);
-                self.mode = XMode::OffSelect;
-                Ok(Step::Continue)
-            }
-            (_, Input::Enter) => Ok(Step::Done),
-            (XMode::Two, Input::Keyword(k)) => {
-                self.mode = match k.as_str() {
-                    "Hor" => XMode::Fixed(0.0),
-                    "Ver" => XMode::Fixed(std::f64::consts::FRAC_PI_2),
-                    "Ang" => XMode::AngAsk,
-                    "Bisect" => XMode::Bisect,
-                    _ => XMode::OffDist,
-                };
-                Ok(Step::Continue)
-            }
-            (XMode::Two, Input::Point(p)) => {
-                match self.base {
-                    None => self.base = Some(p),
-                    Some(b) => {
-                        if !b.near(p, 1e-12) {
-                            add_xline(s, b, p - b)?;
-                        }
-                    }
-                }
-                Ok(Step::Continue)
-            }
-            (XMode::Fixed(a), Input::Point(p)) => {
-                add_xline(s, p, Vec2::from_angle(a))?;
-                Ok(Step::Continue)
-            }
-            (XMode::AngAsk, Input::Keyword(_)) => {
-                self.mode = XMode::RefSelect;
-                Ok(Step::Continue)
-            }
-            (XMode::AngAsk, Input::Text(t)) => {
-                let a = s.angle_settings().direction(&t).ok_or_else(|| other("Requires a valid angle."))?;
-                self.mode = XMode::Fixed(a);
-                Ok(Step::Continue)
-            }
-            (XMode::RefSelect, Input::Point(p)) => {
-                let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                let (_, d) = linear_of(s, h, Some(p))?;
-                self.mode = XMode::RefAngle(d.angle());
-                Ok(Step::Continue)
-            }
-            (XMode::RefAngle(base), Input::Text(t)) => {
-                let a = s.angle_settings().rotation(&t).ok_or_else(|| other("Requires a valid angle."))?;
-                self.mode = XMode::Fixed(base + a);
-                Ok(Step::Continue)
-            }
-            (XMode::Bisect, Input::Point(p)) => {
-                if self.bis.len() < 2 {
-                    self.bis.push(p);
-                } else if let (Some(v), Some(a)) = (self.bis.first().copied(), self.bis.get(1).copied()) {
-                    let d = bisect_dir(v, a, p).ok_or_else(|| other("Invalid angle."))?;
-                    add_xline(s, v, d)?;
-                }
-                Ok(Step::Continue)
-            }
-            (XMode::OffDist, Input::Keyword(_)) => {
-                self.offset = None;
-                s.doc_mut()?.header.set_f64("OFFSETDIST", -1.0);
-                self.mode = XMode::OffSelect;
-                Ok(Step::Continue)
-            }
-            (XMode::OffDist, Input::Text(t)) => {
-                let d = number(&t).filter(|d| *d >= 0.0).ok_or_else(|| other("Requires a non-negative distance."))?;
-                self.offset = Some(d);
-                s.doc_mut()?.header.set_f64("OFFSETDIST", d);
-                self.mode = XMode::OffSelect;
-                Ok(Step::Continue)
-            }
-            (XMode::OffSelect, Input::Point(p)) => {
-                let h = curves::pick_at(s, p).ok_or_else(|| other("*Invalid selection*"))?;
-                self.line = Some(linear_of(s, h, Some(p))?);
-                self.mode = XMode::OffSide;
-                Ok(Step::Continue)
-            }
-            (XMode::OffSide, Input::Point(p)) => {
-                let (b, d) = self.line.ok_or_else(|| other("No line selected."))?;
-                let (nb, nd) = match self.offset {
-                    Some(dist) => offset_xline(b, d, dist, p),
-                    None => (p, d),
-                };
-                add_xline(s, nb, nd)?;
-                self.mode = XMode::OffSelect;
-                Ok(Step::Continue)
-            }
-            _ => Err(other("Invalid input.")),
-        }
-    }
-    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
-        let xl = |b: Vec2, d: Vec2| {
-            let d = d.normalized();
-            (d != Vec2::ZERO).then(|| EntityKind::XLine(RayLine { base: v3(b), dir: v3(d) }))
-        };
-        match self.mode {
-            XMode::Two => self.base.and_then(|b| xl(b, c - b)).into_iter().collect(),
-            XMode::Fixed(a) => xl(c, Vec2::from_angle(a)).into_iter().collect(),
-            XMode::Bisect => match self.bis.as_slice() {
-                [v, a] => bisect_dir(*v, *a, c).and_then(|d| xl(*v, d)).into_iter().collect(),
-                _ => Vec::new(),
-            },
-            XMode::OffSide => self
-                .line
-                .and_then(|(b, d)| {
-                    let (nb, nd) = match self.offset {
-                        Some(dist) => offset_xline(b, d, dist, c),
-                        None => (c, d),
-                    };
-                    xl(nb, nd)
-                })
-                .into_iter()
-                .collect(),
-            _ => Vec::new(),
-        }
-    }
-}
@@ -7,7 +7,7 @@ mod template;

 use std::sync::OnceLock;

-use cadcraft_doc::{Drawing, Format};
+use cadcraft_doc::Drawing;
 pub use cadcraft_dxf::Version;
 use serde_json::{Value, json};

@@ -136,7 +136,8 @@ fn save_options(cmd: &str, p: &Value) -> Result<SaveAs> {

 /// Whether `path` names a DXF file (or has no extension, which saves as DXF).
 fn is_dxf(path: &str) -> bool {
-    Format::from_path(path) == Some(Format::Dxf)
+    let ext = std::path::Path::new(path).extension().map(|e| e.to_string_lossy().to_ascii_lowercase()).unwrap_or_default();
+    matches!(ext.as_str(), "dxf" | "")
 }

 /// The drawing written to `path` with `opts`: through [`IoHooks::write`] when no option is set,
@@ -272,21 +273,17 @@ pub struct ReadFile {
 }

 /// Read and decode `path` (the slow half of `OPEN {path}`). Needs no session; runs anywhere.
-pub fn read_file(path: &std::path::Path) -> std::result::Result<ReadFile, String> {
+pub fn read_file(path: &str) -> std::result::Result<ReadFile, String> {
    #[cfg(not(target_arch = "wasm32"))]
    {
        let r = std::panic::catch_unwind(|| {
-            let shown = path.display();
-            // The session keeps paths as text; a name that isn't Unicode could never be saved back to.
-            let Some(text_path) = path.to_str() else {
-                return Err(bad("open", format!("{shown}: the file name is not valid Unicode, so CADCraft can't save back to it")));
-            };
-            let bytes = crate::capped_read::read_capped(path, MAX_DRAWING_BYTES).map_err(|e| bad("open", format!("{shown}: {e}")))?;
-            read_bytes(&bytes, text_path, Some(text_path.to_string()))
+            let bytes =
+                crate::capped_read::read_capped(std::path::Path::new(path), MAX_DRAWING_BYTES).map_err(|e| bad("open", format!("{path}: {e}")))?;
+            read_bytes(&bytes, path, Some(path.to_string()))
        });
        match r {
            Ok(r) => r.map_err(|e| e.to_string()),
-            Err(_) => Err(bad("open", format!("{}: the file could not be read", path.display())).to_string()),
+            Err(_) => Err(bad("open", format!("{path}: the file could not be read")).to_string()),
        }
    }
    #[cfg(target_arch = "wasm32")]
@@ -518,7 +515,7 @@ fn run_bytes(s: &mut Session, p: &Value) -> Result<Value> {
    let lost = not_saved_as(s.doc()?, version);
    let bytes = write_bytes(s, "document.bytes", &format!("drawing.{fmt}"), &opts)?;
    let mut r = json!({ "data": base64_encode(&bytes), "bytes": bytes.len() });
-    if drops_unknown(format!("drawing.{fmt}")) {
+    if drops_unknown(&format!("drawing.{fmt}")) {
        report_not_saved(s, &mut r, &lost);
    }
    Ok(r)
@@ -566,13 +563,15 @@ pub fn not_saved_message(lost: &std::collections::BTreeMap<String, usize>) -> Op

 /// Whether saving to `path` leaves out the entities [`not_saved`] counts: DWG does (the DWG
 /// bridge drops types it doesn't know); DXF writes them back as read.
-pub fn drops_unknown(path: impl AsRef<std::path::Path>) -> bool {
-    Format::from_path(path).is_some_and(Format::drops_unknown)
+pub fn drops_unknown(path: &str) -> bool {
+    // Templates (.dwt) are written as DWG too.
+    std::path::Path::new(path).extension().is_some_and(|e| e.eq_ignore_ascii_case("dwg") || e.eq_ignore_ascii_case("dwt"))
 }

 /// Whether `path` is saved as a drawing (DXF, DWG) rather than exported as an image.
-fn is_drawing_file(path: impl AsRef<std::path::Path>) -> bool {
-    Format::from_path(path).is_some_and(Format::is_drawing)
+fn is_drawing_file(path: &str) -> bool {
+    let ext = std::path::Path::new(path).extension().map(|e| e.to_string_lossy().to_ascii_lowercase()).unwrap_or_default();
+    matches!(ext.as_str(), "dxf" | "dwg" | "dwt" | "")
 }

 /// Say on the command line what the file couldn't keep, and list it in the result's `notSaved`.
@@ -10,7 +10,7 @@ use cadcraft_geom::{Bounds2, PolyVertex, Polyline, Vec2, point_in_polygon};
 use serde_json::{Value, json};

 use super::helpers::lwpoly;
-use super::{CommandSpec, bad, bool_or, f64_or, point_param, points_param, size_param, str_param, targets};
+use super::*;

 use crate::{Accept, EngineError, Input, Interactive, Picker, Prompt, Result, Session, Step};

@@ -11,7 +11,6 @@ use super::{CommandSpec, bad, bool_or, f64_req, point_req, point_value, points_p
 use crate::units::{format_angle, format_distance};
 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};

-mod arcs;
 mod loops;
 mod regions;
 mod shapes;
@@ -419,9 +418,6 @@ fn run_area(s: &mut Session, p: &Value) -> Result<Value> {
        let h = targets(s, p)?.first().copied().ok_or_else(|| bad("area", "`points` or `handle` is required"))?;
        object_area(s, h)?
    };
-    if let Some(what) = too_large(a, per) {
-        return Err(bad("area", format!("the {what} is too large")));
-    }
    Ok(json!({ "area": a, "perimeter": per, "message": area_text(s, a, per) }))
 }

@@ -460,17 +456,6 @@ fn fmt_volume(s: &Session, v: f64) -> String {
    format_distance(v, if matches!(u, 3 | 4) { 2 } else { u }, p)
 }

-/// "area" or "perimeter" when that value is past f64's range, `None` when both can be reported.
-fn too_large(a: f64, per: f64) -> Option<&'static str> {
-    if !a.is_finite() {
-        Some("area")
-    } else if !per.is_finite() {
-        Some("perimeter")
-    } else {
-        None
-    }
-}
-
 /// Area and perimeter of a closed object (AREA's Object option).
 pub(super) fn object_area(s: &Session, h: Handle) -> Result<(f64, f64)> {
    let d = s.doc()?;
@@ -709,16 +694,10 @@ pub(super) struct DistM {
    sources: Vec<Option<crate::snap::ViewportPoint>>,
    /// Asking for the length of a segment (the Length option).
    length: bool,
-    /// The bulge of the segment that starts at each point (the Arc option).
-    bulges: Vec<f64>,
-    arcs: arcs::Arcs,
 }

-/// Total length of the segments through `pts`, each with its bulge in `bulges`.
-fn path_len(pts: &[Vec2], bulges: &[f64]) -> f64 {
-    if arcs::has_arcs(bulges) {
-        return arcs::polyline(pts, bulges, false).len();
-    }
+/// Total length of the segments through `pts`.
+fn path_len(pts: &[Vec2]) -> f64 {
    pts.windows(2)
        .map(|w| match w {
            [a, b] => a.dist(*b),
@@ -728,11 +707,15 @@ fn path_len(pts: &[Vec2], bulges: &[f64]) -> f64 {
 }

 /// The point `len` beyond the last of `pts`, continuing the last segment (along X after a single
-/// point, along the tangent after an arc segment): the Length option of AREA and DIST's point
-/// sequences.
-fn extend_last(pts: &[Vec2], bulges: &[f64], len: f64) -> Option<Vec2> {
+/// point): the Length option of AREA and DIST's point sequences.
+fn extend_last(pts: &[Vec2], len: f64) -> Option<Vec2> {
    let last = *pts.last()?;
-    let p = last + arcs::tangent(pts, bulges) * len;
+    let dir = match pts.len().checked_sub(2).and_then(|i| pts.get(i)) {
+        Some(prev) => (last - *prev).normalized(),
+        None => Vec2::X,
+    };
+    let dir = if dir == Vec2::ZERO { Vec2::X } else { dir };
+    let p = last + dir * len;
    p.is_finite().then_some(p)
 }

@@ -741,21 +724,13 @@ fn length_prompt() -> Prompt {
 }

 /// Feed the Length option's answer: the next point, or `None` when the option was dismissed (Enter).
-fn length_input(pts: &[Vec2], bulges: &[f64], i: Input) -> Result<Option<Vec2>> {
+fn length_input(pts: &[Vec2], i: Input) -> Result<Option<Vec2>> {
    let t = match i {
        Input::Text(t) => t,
        _ => return Ok(None),
    };
    let len = crate::units::parse_distance(&t).filter(|v| v.is_finite()).ok_or_else(|| crate::EngineError::Other("Requires a distance.".into()))?;
-    Ok(extend_last(pts, bulges, len))
-}
-
-/// Where the paper point `p`, computed near `last` (an arc option's end point), lies in the model
-/// space of the viewport `last` was picked through (the last of `sources`).
-fn follow_source(sources: &[Option<crate::snap::ViewportPoint>], last: Vec2, p: Vec2) -> Option<crate::snap::ViewportPoint> {
-    let source = sources.last().copied().flatten()?;
-    let point = source.point + (p - last) / source.scale;
-    (source.scale.abs() > 1e-12 && point.is_finite()).then_some(crate::snap::ViewportPoint { point, ..source })
+    Ok(extend_last(pts, len))
 }

 /// Model units apply only when every point was snapped through one and the same viewport.
@@ -768,13 +743,10 @@ impl Interactive for DistM {
    fn name(&self) -> &'static str {
        "DIST"
    }
-    fn prompt(&self, s: &Session) -> Prompt {
+    fn prompt(&self, _s: &Session) -> Prompt {
        if self.length {
            return length_prompt();
        }
-        if let Some(p) = self.multi.as_deref().and_then(|pts| self.arcs.prompt(s, pts, &self.bulges, "")) {
-            return p;
-        }
        match (&self.multi, self.first) {
            (Some(pts), _) if pts.len() < 2 => {
                Prompt::new("Specify second point", Accept::POINT).kw(&["Arc", "Length", "Undo"]).base_opt(pts.last().copied())
@@ -791,7 +763,7 @@ impl Interactive for DistM {
        if let Some(pts) = &mut self.multi {
            if self.length {
                let model = model_points(&self.sources);
-                if let Some(p) = length_input(model.as_deref().unwrap_or(pts), &self.bulges, i)? {
+                if let Some(p) = length_input(model.as_deref().unwrap_or(pts), i)? {
                    let source = model.as_ref().and_then(|_| self.sources.last().copied().flatten());
                    let paper = match (source, pts.last()) {
                        (Some(source), Some(last)) => *last + (p - source.point) * source.scale,
@@ -800,64 +772,31 @@ impl Interactive for DistM {
                    if !paper.is_finite() {
                        return Err(bad("dist", "the next point is too large"));
                    }
-                    arcs::push(pts, &mut self.bulges, paper, 0.0);
+                    pts.push(paper);
                    self.sources.push(source.map(|source| crate::snap::ViewportPoint { point: p, ..source }));
                    let model = model_points(&self.sources);
-                    s.echo(format!("Distance = {}", fmt_d(s, path_len(model.as_deref().unwrap_or(pts), &self.bulges))));
+                    s.echo(format!("Distance = {}", fmt_d(s, path_len(model.as_deref().unwrap_or(pts)))));
                }
                self.length = false;
                return Ok(Step::Continue);
            }
-            if self.arcs.asking() {
-                let last = pts.last().copied();
-                // A picked end point keeps its own viewport; an end computed from the answers follows the
-                // last point's. In model units, a typed radius or chord length is in model units too.
-                let picked_end = match i {
-                    Input::Point(p) if self.arcs.asks_end_point() => Some(p),
-                    _ => None,
-                };
-                let i = match model_points(&self.sources).and(self.sources.last().copied().flatten()) {
-                    Some(source) => self.arcs.scale_typed_size(i, source.scale),
-                    None => i,
-                };
-                if self.arcs.answer(s, i, pts, &mut self.bulges)? {
-                    // The arc can end off the picked point (CEnter projects it onto the circle).
-                    let source = match (picked_end, last, pts.last()) {
-                        (Some(p), _, Some(end)) => follow_source(&[s.picked_viewport], p, *end),
-                        (None, Some(last), Some(end)) => follow_source(&self.sources, last, *end),
-                        _ => None,
-                    };
-                    self.sources.push(source);
-                    let model = model_points(&self.sources);
-                    s.echo(format!("Distance = {}", fmt_d(s, path_len(model.as_deref().unwrap_or(pts), &self.bulges))));
-                }
-                return Ok(Step::Continue);
-            }
            match i {
                Input::Point(p) => {
-                    self.arcs.point(pts, &mut self.bulges, p)?;
+                    pts.push(p);
                    self.sources.push(s.picked_viewport);
                    let model = model_points(&self.sources);
-                    s.echo(format!("Distance = {}", fmt_d(s, path_len(model.as_deref().unwrap_or(pts), &self.bulges))));
+                    s.echo(format!("Distance = {}", fmt_d(s, path_len(model.as_deref().unwrap_or(pts)))));
                }
                Input::Keyword(k) if k == "Undo" => {
                    if pts.len() > 1 {
-                        self.arcs.undo(pts, &mut self.bulges);
+                        pts.pop();
                        self.sources.pop();
                    }
                }
                Input::Keyword(k) if k == "Length" => self.length = true,
-                Input::Keyword(k) if k == "Total" => return self.total(s, false),
-                Input::Keyword(k) if k == "CLose" && self.arcs.on => {
-                    self.arcs.close(pts, &mut self.bulges)?;
-                    return self.total(s, true);
-                }
-                Input::Keyword(k) => {
-                    if !self.arcs.keyword(&k, pts) {
-                        s.echo(format!("{k}: not available yet"));
-                    }
-                }
-                Input::Enter => return self.total(s, false),
+                Input::Keyword(k) if k == "Total" => return self.total(s),
+                Input::Keyword(k) => s.echo(format!("{k}: not available yet")),
+                Input::Enter => return self.total(s),
                _ => {}
            }
            return Ok(Step::Continue);
@@ -891,20 +830,20 @@ impl Interactive for DistM {
    }
    fn preview(&self, _s: &Session, c: Vec2) -> Vec<EntityKind> {
        match &self.multi {
-            Some(pts) => self.arcs.preview(pts, &self.bulges, c, false),
+            Some(pts) => {
+                let mut v: Vec<cadcraft_geom::PolyVertex> = pts.iter().map(|p| cadcraft_geom::PolyVertex::new(*p)).collect();
+                v.push(cadcraft_geom::PolyVertex::new(c));
+                vec![super::helpers::lwpoly(v, false)]
+            }
            None => self.first.map(|a| vec![super::helpers::line(a, c)]).unwrap_or_default(),
        }
    }
 }

 impl DistM {
-    /// Report the total distance and end; `closed` adds the closing segment (CLose).
-    fn total(&self, s: &mut Session, closed: bool) -> Result<Step> {
+    fn total(&self, s: &mut Session) -> Result<Step> {
        let model = model_points(&self.sources);
-        let d = model
-            .as_deref()
-            .or(self.multi.as_deref())
-            .map_or(0.0, |pts| if closed { arcs::polyline(pts, &self.bulges, true).len() } else { path_len(pts, &self.bulges) });
+        let d = model.as_deref().or(self.multi.as_deref()).map_or(0.0, path_len);
        s.echo(format!("Distance = {}", fmt_d(s, d)));
        Ok(Step::Done)
    }
@@ -997,9 +936,6 @@ pub(super) struct AreaM {
    pending: Vec<f64>,
    /// The first point of a height given by two points.
    height_from: Option<Vec2>,
-    /// The bulge of the segment that starts at each point (the Arc option).
-    bulges: Vec<f64>,
-    arcs: arcs::Arcs,
 }

 impl AreaM {
@@ -1027,57 +963,6 @@ impl AreaM {
            AreaMode::Subtract => self.total - v,
        }
    }
-    /// Input while a height is pending: typed, or given by two points (their distance).
-    fn height_input(&mut self, s: &mut Session, i: Input) -> Step {
-        match (i, self.height_from) {
-            (Input::Point(p), None) => self.height_from = Some(p),
-            (Input::Point(p), Some(from)) => {
-                self.height_from = None;
-                return self.height(s, p.dist(from));
-            }
-            (Input::Text(t), None) => match crate::units::parse_distance(&t).filter(|v| v.is_finite()) {
-                Some(h) => return self.height(s, h),
-                None => s.echo("Requires a distance."),
-            },
-            (Input::Enter, None) => s.echo("Requires a height."),
-            (Input::Enter, Some(_)) => s.echo("Requires a second point."),
-            (Input::Text(_), Some(_)) => s.echo("Requires a point."),
-            _ => {}
-        }
-        Step::Continue
-    }
-
-    /// Input while the objects to measure are picked.
-    fn object_input(&mut self, s: &mut Session, i: Input) -> Step {
-        match i {
-            Input::Pick(hs) => {
-                for h in hs {
-                    match object_area(s, h) {
-                        Ok((a, per)) => {
-                            if self.measured(s, a, per) == Step::Done {
-                                return Step::Done;
-                            }
-                            // A single volume takes the first object with an area.
-                            if self.volume && self.mode == AreaMode::Single {
-                                break;
-                            }
-                        }
-                        Err(_) => s.echo("The selected object has no area."),
-                    }
-                }
-            }
-            Input::Enter => {
-                self.object = false;
-                if self.mode == AreaMode::Single {
-                    return Step::Done;
-                }
-            }
-            Input::Text(_) | Input::Keyword(_) => s.echo("*Invalid selection*"),
-            _ => {}
-        }
-        Step::Continue
-    }
-
    /// Measure the oldest pending area's volume with height `h`.
    fn height(&mut self, s: &mut Session, h: f64) -> Step {
        match self.pending.first().map(|a| a * h.abs()) {
@@ -1103,45 +988,27 @@ impl AreaM {
    }
    /// Report an area (and the running total in add/subtract mode); ends the command in single mode.
    /// In volume mode the area waits for its height instead.
-    /// An area, perimeter or total past f64's range is not reported or added to the total.
    fn measured(&mut self, s: &mut Session, a: f64, per: f64) -> Step {
        if self.volume {
-            if !a.is_finite() {
-                s.echo("The area is too large.");
-                return if self.mode == AreaMode::Single { Step::Done } else { Step::Continue };
-            }
            self.pending.push(a);
            return Step::Continue;
        }
-        let total = self.total_with(a);
-        if let Some(what) = too_large(a, per).or_else(|| (!total.is_finite()).then_some("total area")) {
-            s.echo(format!("The {what} is too large."));
-            return if self.mode == AreaMode::Single { Step::Done } else { Step::Continue };
-        }
        s.echo(area_text(s, a, per));
-        if self.mode == AreaMode::Single {
-            return Step::Done;
+        match self.mode {
+            AreaMode::Single => return Step::Done,
+            AreaMode::Add => self.total += a,
+            AreaMode::Subtract => self.total -= a,
        }
-        self.total = total;
        s.echo(format!("Total area = {}", fmt_d(s, self.total)));
        Step::Continue
    }
    /// Close the boundary picked so far (Enter or Total at the next-point prompt).
-    /// An arc segment (the Arc option) can close an area of two points.
    fn close(&mut self, s: &mut Session) -> Step {
        let pts = std::mem::take(&mut self.pts);
-        let bulges = std::mem::take(&mut self.bulges);
-        self.arcs = arcs::Arcs::default();
-        let curved = arcs::has_arcs(&bulges);
-        if pts.len() < if curved { 2 } else { 3 } {
+        if pts.len() < 3 {
            return if self.mode == AreaMode::Single { Step::Done } else { Step::Continue };
        }
-        let (a, per) = if curved {
-            let g = arcs::polyline(&pts, &bulges, true);
-            (g.area().abs(), g.len())
-        } else {
-            area_of(&pts)
-        };
+        let (a, per) = area_of(&pts);
        self.measured(s, a, per)
    }
 }
@@ -1150,7 +1017,7 @@ impl Interactive for AreaM {
    fn name(&self) -> &'static str {
        if self.volume { "MEASUREGEOM" } else { "AREA" }
    }
-    fn prompt(&self, s: &Session) -> Prompt {
+    fn prompt(&self, _s: &Session) -> Prompt {
        if !self.pending.is_empty() {
            return match self.height_from {
                Some(p) => Prompt::new("Specify second point", Accept::POINT).base(p),
@@ -1163,9 +1030,6 @@ impl Interactive for AreaM {
        if self.length {
            return length_prompt();
        }
-        if let Some(p) = self.arcs.prompt(s, &self.pts, &self.bulges, self.mode_prefix()) {
-            return p;
-        }
        let next = format!("{}Specify next point", self.mode_prefix());
        let (add, subtract) = self.mode_keywords();
        match (self.pts.len(), self.mode) {
@@ -1178,40 +1042,72 @@ impl Interactive for AreaM {
    }
    fn input(&mut self, s: &mut Session, i: Input) -> Result<Step> {
        if !self.pending.is_empty() {
-            return Ok(self.height_input(s, i));
+            // A height is typed, or given by two points (their distance).
+            match (i, self.height_from) {
+                (Input::Point(p), None) => self.height_from = Some(p),
+                (Input::Point(p), Some(from)) => {
+                    self.height_from = None;
+                    return Ok(self.height(s, p.dist(from)));
+                }
+                (Input::Text(t), None) => match crate::units::parse_distance(&t).filter(|v| v.is_finite()) {
+                    Some(h) => return Ok(self.height(s, h)),
+                    None => s.echo("Requires a distance."),
+                },
+                (Input::Enter, None) => s.echo("Requires a height."),
+                (Input::Enter, Some(_)) => s.echo("Requires a second point."),
+                (Input::Text(_), Some(_)) => s.echo("Requires a point."),
+                _ => {}
+            }
+            return Ok(Step::Continue);
        }
        if self.object {
-            return Ok(self.object_input(s, i));
+            match i {
+                Input::Pick(hs) => {
+                    for h in hs {
+                        match object_area(s, h) {
+                            Ok((a, per)) => {
+                                if self.measured(s, a, per) == Step::Done {
+                                    return Ok(Step::Done);
+                                }
+                                // A single volume takes the first object with an area.
+                                if self.volume && self.mode == AreaMode::Single {
+                                    break;
+                                }
+                            }
+                            Err(_) => s.echo("The selected object has no area."),
+                        }
+                    }
+                }
+                Input::Enter => {
+                    self.object = false;
+                    if self.mode == AreaMode::Single {
+                        return Ok(Step::Done);
+                    }
+                }
+                Input::Text(_) | Input::Keyword(_) => s.echo("*Invalid selection*"),
+                _ => {}
+            }
+            return Ok(Step::Continue);
        }
        if self.length {
-            if let Some(p) = length_input(&self.pts, &self.bulges, i)? {
-                arcs::push(&mut self.pts, &mut self.bulges, p, 0.0);
+            if let Some(p) = length_input(&self.pts, i)? {
+                self.pts.push(p);
            }
            self.length = false;
            return Ok(Step::Continue);
        }
-        if self.arcs.asking() {
-            self.arcs.answer(s, i, &mut self.pts, &mut self.bulges)?;
-            return Ok(Step::Continue);
-        }
        match i {
-            Input::Point(p) => self.arcs.point(&mut self.pts, &mut self.bulges, p)?,
+            Input::Point(p) => self.pts.push(p),
            Input::Keyword(k) => match k.as_str() {
                "Object" => self.object = true,
                "Add area" | "Add volume" => self.mode = AreaMode::Add,
                "Subtract area" | "Subtract volume" => self.mode = AreaMode::Subtract,
-                "Undo" => self.arcs.undo(&mut self.pts, &mut self.bulges),
+                "Undo" => {
+                    self.pts.pop();
+                }
                "Length" => self.length = true,
                "Total" => return Ok(self.close(s)),
-                "CLose" if self.arcs.on => {
-                    self.arcs.close(&self.pts, &mut self.bulges)?;
-                    return Ok(self.close(s));
-                }
-                k => {
-                    if !self.arcs.keyword(k, &self.pts) {
-                        s.echo(format!("{k}: not available yet"));
-                    }
-                }
+                _ => s.echo(format!("{k}: not available yet")),
            },
            Input::Enter if self.pts.is_empty() => match self.mode {
                // Enter takes the default, Object; in add/subtract mode it ends the command.
@@ -1227,7 +1123,9 @@ impl Interactive for AreaM {
        if self.pts.is_empty() || self.object || self.length {
            return Vec::new();
        }
-        self.arcs.preview(&self.pts, &self.bulges, c, true)
+        let mut v: Vec<cadcraft_geom::PolyVertex> = self.pts.iter().map(|p| cadcraft_geom::PolyVertex::new(*p)).collect();
+        v.push(cadcraft_geom::PolyVertex::new(c));
+        vec![super::helpers::lwpoly(v, true)]
    }
 }

@@ -1,195 +0,0 @@
-//! The Arc option of AREA's and DIST's point sequences (and of MEASUREGEOM's Distance, Area and
-//! Volume): arc segments, asked for as PLINE's arc mode asks for them. Each point carries the
-//! bulge of the segment that starts at it; the last point's bulge is the closing segment's,
-//! which only CLose sets.
-
-use cadcraft_doc::EntityKind;
-use cadcraft_geom::{PolyVertex, Polyline, Vec2, arc_to_bulge, bulge_to_arc};
-
-use super::super::helpers::lwpoly;
-use super::super::machines::number;
-use super::super::pline_opts::{Outcome, PlineAsk};
-
-use crate::{Accept, EngineError, Input, Prompt, Result, Session};
-
-/// Arc mode's keywords: PLINE's arc mode without Halfwidth and Width.
-const KEYWORDS: [&str; 8] = ["Angle", "CEnter", "CLose", "Direction", "Line", "Radius", "Second pt", "Undo"];
-
-/// Arc mode of a point sequence.
-#[derive(Default)]
-pub(super) struct Arcs {
-    /// The Arc option turned arc mode on; Line turns it off.
-    pub(super) on: bool,
-    /// An arc option waiting for its answers (Angle, CEnter, Direction, Radius, Second pt).
-    ask: Option<PlineAsk>,
-}
-
-/// The polyline through `pts`, each segment with its bulge in `bulges` (straight when missing).
-pub(super) fn polyline(pts: &[Vec2], bulges: &[f64], closed: bool) -> Polyline {
-    let vertices = pts.iter().enumerate().map(|(i, p)| PolyVertex::with_bulge(*p, bulges.get(i).copied().unwrap_or(0.0))).collect();
-    Polyline { vertices, closed }
-}
-
-/// Whether any segment of the sequence is an arc.
-pub(super) fn has_arcs(bulges: &[f64]) -> bool {
-    bulges.iter().any(|b| *b != 0.0)
-}
-
-/// The direction the sequence runs in at its last point (+X before the second point): along the
-/// last line segment, or along the tangent at the end of the last arc segment.
-pub(super) fn tangent(pts: &[Vec2], bulges: &[f64]) -> Vec2 {
-    let Some(i) = pts.len().checked_sub(2) else { return Vec2::X };
-    let (Some(prev), Some(last)) = (pts.get(i).copied(), pts.last().copied()) else { return Vec2::X };
-    let d = match bulge_to_arc(prev, last, bulges.get(i).copied().unwrap_or(0.0)) {
-        Some((a, ccw)) => {
-            let r = (last - a.center).perp().normalized();
-            if ccw { r } else { -r }
-        }
-        None => (last - prev).normalized(),
-    };
-    if d == Vec2::ZERO { Vec2::X } else { d }
-}
-
-/// The bulge of an arc from the last point to `p` that continues the sequence's direction; an
-/// error when `p` lies straight behind the last point, where no such arc exists.
-fn tangent_bulge(pts: &[Vec2], bulges: &[f64], p: Vec2) -> Result<f64> {
-    let Some(last) = pts.last().copied() else { return Ok(0.0) };
-    let dir = tangent(pts, bulges);
-    let chord = p - last;
-    // The included angle is twice the angle between the tangent and the chord.
-    let theta = dir.cross(chord).atan2(dir.dot(chord));
-    let b = arc_to_bulge(2.0 * theta);
-    if theta.abs() < std::f64::consts::PI - 1e-6 && b.is_finite() { Ok(b) } else { Err(EngineError::Other("Invalid arc endpoint.".into())) }
-}
-
-/// Add the segment from the last point to `end` with bulge `bulge` (the first point when there is none).
-pub(super) fn push(pts: &mut Vec<Vec2>, bulges: &mut Vec<f64>, end: Vec2, bulge: f64) {
-    bulges.resize(pts.len(), 0.0);
-    if let Some(b) = bulges.last_mut() {
-        *b = bulge;
-    }
-    pts.push(end);
-    bulges.push(0.0);
-}
-
-impl Arcs {
-    /// An arc option is waiting for its answers.
-    pub(super) fn asking(&self) -> bool {
-        self.ask.is_some()
-    }
-
-    /// The question being answered takes the arc's end point, so a picked point is the end of the segment.
-    pub(super) fn asks_end_point(&self) -> bool {
-        matches!(
-            self.ask,
-            Some(PlineAsk::AngleEnd(_) | PlineAsk::CenterEnd(_) | PlineAsk::DirectionEnd(_) | PlineAsk::RadiusEnd(_) | PlineAsk::SecondEnd(_))
-        )
-    }
-
-    /// A typed radius or chord length multiplied by `scale`, for a sequence measured in another
-    /// space's units than the one its points are in; any other input as it is.
-    pub(super) fn scale_typed_size(&self, i: Input, scale: f64) -> Input {
-        let size = matches!(self.ask, Some(PlineAsk::Radius | PlineAsk::AngleRadius(_) | PlineAsk::CenterLength(_)));
-        match i {
-            Input::Text(t) if size => match number(&t).map(|v| v * scale).filter(|v| v.is_finite()) {
-                Some(v) => Input::Text(v.to_string()),
-                None => Input::Text(t),
-            },
-            i => i,
-        }
-    }
-
-    /// The arc-mode prompt, or the question of the arc option being answered; `None` in line mode
-    /// and before the first point.
-    pub(super) fn prompt(&self, s: &Session, pts: &[Vec2], bulges: &[f64], prefix: &str) -> Option<Prompt> {
-        let st = pts.last().copied()?;
-        if let Some(a) = self.ask {
-            return Some(a.prompt(st, tangent(pts, bulges), s));
-        }
-        self.on.then(|| Prompt::new(format!("{prefix}Specify endpoint of arc"), Accept::POINT).kw(&KEYWORDS).base(st))
-    }
-
-    /// Feed an answer to the arc option being answered; true when it added a segment.
-    pub(super) fn answer(&mut self, s: &Session, i: Input, pts: &mut Vec<Vec2>, bulges: &mut Vec<f64>) -> Result<bool> {
-        let (Some(a), Some(st)) = (self.ask, pts.last().copied()) else {
-            self.ask = None;
-            return Ok(false);
-        };
-        match a.input(s, i, st, tangent(pts, bulges))? {
-            Outcome::Ask(next) => self.ask = Some(next),
-            Outcome::Back => self.ask = None,
-            Outcome::Segment(end, bulge) => {
-                self.ask = None;
-                push(pts, bulges, end, bulge);
-                return Ok(true);
-            }
-        }
-        Ok(false)
-    }
-
-    /// Arc, Line, and arc mode's Angle, CEnter, Direction, Radius and Second pt; false for any
-    /// other keyword.
-    pub(super) fn keyword(&mut self, k: &str, pts: &[Vec2]) -> bool {
-        match k {
-            "Arc" if !pts.is_empty() => self.on = true,
-            "Line" if self.on => self.on = false,
-            _ => match PlineAsk::from_keyword(k, true) {
-                Some(a) if self.on && !pts.is_empty() => self.ask = Some(a),
-                _ => return false,
-            },
-        }
-        true
-    }
-
-    /// A point at the next-point prompt: in arc mode, the end of an arc that continues the
-    /// sequence's direction; otherwise the end of a line segment.
-    pub(super) fn point(&self, pts: &mut Vec<Vec2>, bulges: &mut Vec<f64>, p: Vec2) -> Result<()> {
-        let bulge = if self.on && !pts.is_empty() { tangent_bulge(pts, bulges, p)? } else { 0.0 };
-        push(pts, bulges, p, bulge);
-        Ok(())
-    }
-
-    /// CLose: the closing segment becomes an arc from the last point to the first that continues
-    /// the sequence's direction.
-    pub(super) fn close(&self, pts: &[Vec2], bulges: &mut Vec<f64>) -> Result<()> {
-        let Some(first) = pts.first().copied().filter(|_| pts.len() >= 2) else {
-            return Err(EngineError::Other("CLose needs at least two points.".into()));
-        };
-        let bulge = tangent_bulge(pts, bulges, first)?;
-        bulges.resize(pts.len(), 0.0);
-        if let Some(b) = bulges.last_mut() {
-            *b = bulge;
-        }
-        Ok(())
-    }
-
-    /// Undo: remove the last point and the segment to it. Removing the first point leaves arc mode.
-    pub(super) fn undo(&mut self, pts: &mut Vec<Vec2>, bulges: &mut Vec<f64>) {
-        pts.pop();
-        bulges.truncate(pts.len());
-        if let Some(b) = bulges.last_mut() {
-            *b = 0.0;
-        }
-        if pts.is_empty() {
-            *self = Arcs::default();
-        }
-    }
-
-    /// The sequence with the segment to the cursor `c` that a click would add.
-    pub(super) fn preview(&self, pts: &[Vec2], bulges: &[f64], c: Vec2, closed: bool) -> Vec<EntityKind> {
-        let Some(st) = pts.last().copied() else { return Vec::new() };
-        let next = match self.ask {
-            Some(a) => a.preview(st, tangent(pts, bulges), c),
-            None if self.on => tangent_bulge(pts, bulges, c).ok().map(|b| (c, b)),
-            None => Some((c, 0.0)),
-        };
-        let mut g = polyline(pts, bulges, closed);
-        if let Some((end, bulge)) = next {
-            if let Some(v) = g.vertices.last_mut() {
-                v.bulge = bulge;
-            }
-            g.vertices.push(PolyVertex::new(end));
-        }
-        vec![lwpoly(g.vertices, closed)]
-    }
-}
@@ -117,7 +117,21 @@ pub fn run(s: &mut Session, p: &Value) -> Result<Value> {

    // Endpoints closer than the tolerance meet. Transitive components of three or more ends are
    // branch junctions; a component of exactly two is a simple joint.
-    let mut parent = merge_ends(&ends, tol);
+    let mut parent: Vec<usize> = (0..n).collect();
+    for i in 0..n {
+        let Some(a) = ends.get(i) else { continue };
+        for j in (i + 1)..n {
+            let Some(b) = ends.get(j) else { continue };
+            if a.at.dist(b.at) <= tol {
+                let (ra, rb) = (find(&mut parent, i), find(&mut parent, j));
+                if ra != rb
+                    && let Some(slot) = parent.get_mut(ra)
+                {
+                    *slot = rb;
+                }
+            }
+        }
+    }
    let mut groups: BTreeMap<usize, Vec<usize>> = BTreeMap::new();
    for i in 0..n {
        let root = find(&mut parent, i);
@@ -126,8 +140,54 @@ pub fn run(s: &mut Session, p: &Value) -> Result<Value> {

    // Junctions are reported and their pieces left out of the chains: not resolved.
    let mut excluded = vec![false; pieces.len()];
-    let (joints, junctions) = sort_groups(&groups, &ends, &pieces, &mut excluded);
-    let link = joint_links(joints, &ends, &pieces, &excluded);
+    let mut junctions: Vec<Value> = Vec::new();
+    let mut joints: Vec<(usize, usize)> = Vec::new();
+    for group in groups.values() {
+        match group.as_slice() {
+            &[a, b] => joints.push((a, b)),
+            [_, _, ..] => {
+                let scale = group.len() as f64;
+                let mut at = Vec2::ZERO;
+                let mut members: Vec<Handle> = Vec::new();
+                for &e in group {
+                    let Some(end) = ends.get(e) else { continue };
+                    at += end.at / scale;
+                    let Some(piece) = pieces.get(end.piece) else { continue };
+                    if !members.contains(&piece.handle) {
+                        members.push(piece.handle);
+                    }
+                    if let Some(slot) = excluded.get_mut(end.piece) {
+                        *slot = true;
+                    }
+                }
+                junctions.push(json!({
+                    "at": [at.x, at.y],
+                    "ends": group.len(),
+                    "members": members.iter().map(|h| h.hex()).collect::<Vec<_>>(),
+                }));
+            }
+            _ => {}
+        }
+    }
+
+    // A joint links the two ends for the walk. A joint into an excluded piece is not a link, and
+    // a line whose own ends meet within a huge tolerance is a spur, not a zero-area loop.
+    let mut link: Vec<Option<usize>> = vec![None; n];
+    for (a, b) in joints {
+        let (Some(ea), Some(eb)) = (ends.get(a), ends.get(b)) else { continue };
+        if ea.piece == eb.piece && pieces.get(ea.piece).is_some_and(|p| p.arc.is_none()) {
+            continue;
+        }
+        if excluded.get(ea.piece).copied().unwrap_or(true) || excluded.get(eb.piece).copied().unwrap_or(true) {
+            continue;
+        }
+        if let Some(slot) = link.get_mut(a) {
+            *slot = Some(b);
+        }
+        if let Some(slot) = link.get_mut(b) {
+            *slot = Some(a);
+        }
+    }

    let mut visited = vec![false; pieces.len()];
    let mut loops: Vec<Value> = Vec::new();
@@ -165,84 +225,6 @@ pub fn run(s: &mut Session, p: &Value) -> Result<Value> {
 }

 /// A report with nothing analyzed: an empty drawing, or one past the pair cap.
-/// Union-find over the ends: ends closer than `tol` share a root. Returns each end's parent.
-fn merge_ends(ends: &[End], tol: f64) -> Vec<usize> {
-    let n = ends.len();
-    let mut parent: Vec<usize> = (0..n).collect();
-    for i in 0..n {
-        let Some(a) = ends.get(i) else { continue };
-        for j in (i + 1)..n {
-            let Some(b) = ends.get(j) else { continue };
-            if a.at.dist(b.at) <= tol {
-                let (ra, rb) = (find(&mut parent, i), find(&mut parent, j));
-                if ra != rb
-                    && let Some(slot) = parent.get_mut(ra)
-                {
-                    *slot = rb;
-                }
-            }
-        }
-    }
-    parent
-}
-
-/// Each group of two ends is a joint (end indices); each of three or more is a junction, reported
-/// with its pieces marked `excluded`.
-fn sort_groups(groups: &BTreeMap<usize, Vec<usize>>, ends: &[End], pieces: &[Piece], excluded: &mut [bool]) -> (Vec<(usize, usize)>, Vec<Value>) {
-    let mut joints: Vec<(usize, usize)> = Vec::new();
-    let mut junctions: Vec<Value> = Vec::new();
-    for group in groups.values() {
-        match group.as_slice() {
-            &[a, b] => joints.push((a, b)),
-            [_, _, ..] => {
-                let scale = group.len() as f64;
-                let mut at = Vec2::ZERO;
-                let mut members: Vec<Handle> = Vec::new();
-                for &e in group {
-                    let Some(end) = ends.get(e) else { continue };
-                    at += end.at / scale;
-                    let Some(piece) = pieces.get(end.piece) else { continue };
-                    if !members.contains(&piece.handle) {
-                        members.push(piece.handle);
-                    }
-                    if let Some(slot) = excluded.get_mut(end.piece) {
-                        *slot = true;
-                    }
-                }
-                junctions.push(json!({
-                    "at": [at.x, at.y],
-                    "ends": group.len(),
-                    "members": members.iter().map(|h| h.hex()).collect::<Vec<_>>(),
-                }));
-            }
-            _ => {}
-        }
-    }
-    (joints, junctions)
-}
-
-/// The link each end takes from the joints. A joint into an excluded piece is not a link, and
-/// a line whose own ends meet within a huge tolerance is a spur, not a zero-area loop.
-fn joint_links(joints: Vec<(usize, usize)>, ends: &[End], pieces: &[Piece], excluded: &[bool]) -> Vec<Option<usize>> {
-    let mut link: Vec<Option<usize>> = vec![None; ends.len()];
-    for (a, b) in joints {
-        let (Some(ea), Some(eb)) = (ends.get(a), ends.get(b)) else { continue };
-        if ea.piece == eb.piece && pieces.get(ea.piece).is_some_and(|p| p.arc.is_none()) {
-            continue;
-        }
-        if excluded.get(ea.piece).copied().unwrap_or(true) || excluded.get(eb.piece).copied().unwrap_or(true) {
-            continue;
-        }
-        if let Some(slot) = link.get_mut(a) {
-            *slot = Some(b);
-        }
-        if let Some(slot) = link.get_mut(b) {
-            *slot = Some(a);
-        }
-    }
-    link
-}
-
 fn empty_report(offset: usize, tol: f64, pair_tests: usize, pair_tests_needed: usize, pair_limit: usize, capped: bool, skipped: Skipped) -> Value {
    json!({
        "schema": 1,
@@ -432,4 +432,5 @@ pub fn run(s: &mut Session, p: &Value) -> Result<Value> {
 }

 #[cfg(test)]
+#[path = "usage_tests.rs"]
 mod tests;
@@ -1,4 +1,4 @@
-//! Layouts, paper-space viewports, page setup and plotting: LAYOUT (new/delete/rename/copy/saveas),
+//! Layouts, paper-space viewports, page setup and plotting: LAYOUT (new/delete/rename/copy),
 //! MVIEW / VPORTS, viewport scale/lock/layer settings, PAGESETUP, PLOT and EXPORTPDF.
 //!
 //! Plotting goes through the host's [`super::file::IoHooks::plot`] hook so the engine stays
@@ -9,7 +9,7 @@ use cadcraft_geom::{Bounds2, Vec2};
 use serde_json::{Value, json};

 use super::file::{base64_encode, io};
-use super::{CommandSpec, bad, bool_or, find_command, point_param, point_value, str_param, targets};
+use super::*;

 use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 use viewports::MviewM;
@@ -22,7 +22,7 @@ pub fn specs() -> Vec<CommandSpec> {
    vec![
        CommandSpec::new("layout", "Layout", run_layout)
            .alias(&["lo"])
-            .params("{option: new|copy|delete|rename|saveas|set|list, name?, to?, path? (saveas)} (typed LAYOUT / -LAYOUT: option prompts)")
+            .params("{option: new|copy|delete|rename|set|list, name?, to?} (typed LAYOUT / -LAYOUT: option prompts)")
            .interactive(|_| Ok(Box::new(prompts::LayoutM::default()))),
        CommandSpec::new("layout.new", "New Layout", run_new)
            .menu(&["Insert", "Layout", "New Layout"])
@@ -32,9 +32,6 @@ pub fn specs() -> Vec<CommandSpec> {
        CommandSpec::new("layout.rename", "Rename Layout", run_rename).params("{from?: current layout, to}"),
        CommandSpec::new("layout.copy", "Copy Layout", run_copy).params("{from, to?}"),
        CommandSpec::new("layout.list", "List Layouts", run_list).params("→ [{name, tabOrder, page, viewports}]").noundo(),
-        CommandSpec::new("layout.saveas", "Save Layout as Template", saveas::run_saveas)
-            .params("{name?: layout (default: the current layout, else the first tab), path: .dwt (or .dwg, .dxf; no extension adds .dwt)} → {name, path, bytes, notSaved?}")
-            .noundo(),
        CommandSpec::new("mview", "Viewports", run_mview)
            .alias(&["mv"])
            .params(
@@ -337,9 +334,6 @@ fn run_list(s: &mut Session, _p: &Value) -> Result<Value> {
    ))
 }

-/// LAYOUT SAveas: a layout written as a drawing template.
-mod saveas;
-
 /// `-LAYOUT`-style dispatcher.
 fn run_layout(s: &mut Session, p: &Value) -> Result<Value> {
    let opt = str_param(p, "option").unwrap_or("list").to_ascii_lowercase();
@@ -368,9 +362,8 @@ fn run_layout(s: &mut Session, p: &Value) -> Result<Value> {
            let set = find_command("layout.set").ok_or_else(|| bad("layout", "layout.set is missing"))?;
            (set.run)(s, p)
        }
-        "saveas" | "sa" => saveas::run_saveas(s, p),
        "list" | "?" => run_list(s, p),
-        _ => Err(bad("layout", "option must be new, copy, delete, rename, saveas, set or list")),
+        _ => Err(bad("layout", "option must be new, copy, delete, rename, set or list")),
    }
 }

@@ -891,4 +884,303 @@ fn plot_window(s: &Session, p: &Value, cmd: &str, space: &Space) -> Result<Optio
 }

 #[cfg(test)]
-mod tests;
+mod tests {
+    use super::*;
+
+    fn session_with_model() -> Session {
+        let mut s = Session::new();
+        s.cmdline("line 0,0 100,0").unwrap();
+        s.cmdline("").unwrap();
+        s.cmdline("circle 50,25 20").unwrap();
+        s
+    }
+
+    fn viewports(s: &Session, layout: &str) -> Vec<(Handle, Viewport)> {
+        s.doc()
+            .unwrap()
+            .layout(layout)
+            .unwrap()
+            .entities
+            .iter()
+            .filter_map(|e| if let EntityKind::Viewport(v) = &e.kind { Some((e.handle, v.clone())) } else { None })
+            .collect()
+    }
+
+    #[test]
+    fn new_layout_gets_viewport_zoomed_to_extents() {
+        let mut s = session_with_model();
+        let r = s.execute("layout.new", &json!({})).unwrap();
+        assert_eq!(r["name"], "Layout3");
+        let vps = viewports(&s, "Layout3");
+        assert_eq!(vps.len(), 1);
+        let (_, v) = &vps[0];
+        let sheet = cadcraft_render::sheet(s.doc().unwrap(), "Layout3").unwrap();
+        assert!((v.width - sheet.printable.width()).abs() < 1e-9 && (v.height - sheet.printable.height()).abs() < 1e-9);
+        assert!(v.id >= 2);
+        // Model extents (0,0)..(100,45) are centred and fully visible.
+        assert!(v.view_center.near(Vec2::new(50.0, 22.5), 1e-6));
+        let model_w = v.view_height * v.width / v.height;
+        assert!(model_w >= 100.0 && v.view_height >= 45.0);
+        // The render shows model geometry inside the viewport only.
+        let list = cadcraft_render::build(s.doc().unwrap(), &Space::Paper("Layout3".into()), &cadcraft_render::Options::default());
+        let rect = Bounds2::new(v.center.xy() - Vec2::new(v.width, v.height) / 2.0, v.center.xy() + Vec2::new(v.width, v.height) / 2.0).expand(1e-9);
+        let content: Vec<_> = list.prims.iter().filter(|p| p.handle == cadcraft_render::VIEWPORT_CONTENT).collect();
+        assert!(content.len() >= 2);
+        assert!(content.iter().all(|p| list.points(p).iter().all(|q| rect.contains(*q))));
+        assert!(list.sheet.is_some());
+        // Undo removes the layout.
+        s.undo().unwrap();
+        assert!(s.doc().unwrap().layout("Layout3").is_none());
+    }
+
+    #[test]
+    fn rename_keeps_the_active_layout_whatever_its_case() {
+        let mut s = session_with_model();
+        s.doc_mut().unwrap().active_layout = Some("layout1".into());
+        s.execute("layout.rename", &json!({"from": "Layout1", "to": "Sheet A"})).unwrap();
+        assert_eq!(s.doc().unwrap().active_layout.as_deref(), Some("Sheet A"));
+    }
+
+    #[test]
+    fn rename_copy_delete() {
+        let mut s = session_with_model();
+        s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
+        s.execute("layout.rename", &json!({"to": "Sheet A"})).unwrap();
+        assert_eq!(s.space(), Space::Paper("Sheet A".into()));
+        assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "Layout2"})).is_err(), "duplicate");
+        assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "a/b"})).is_err(), "bad char");
+        assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "model"})).is_err(), "reserved");
+        s.execute("mview", &json!({"p1": [1, 1], "p2": [5, 4]})).unwrap();
+        let r = s.execute("layout.copy", &json!({"from": "Sheet A"})).unwrap();
+        assert_eq!(r["name"], "Sheet A (2)");
+        let a = viewports(&s, "Sheet A");
+        let b = viewports(&s, "Sheet A (2)");
+        assert_eq!(a.len(), 1);
+        assert_eq!(b.len(), 1);
+        assert_ne!(a[0].0, b[0].0, "copied entities get new handles");
+        s.execute("layout.delete", &json!({"name": "sheet a"})).unwrap();
+        assert_eq!(s.space(), Space::Model, "deleting the current layout returns to Model");
+        s.execute("layout", &json!({"option": "delete", "name": "Layout2"})).unwrap();
+        assert!(s.execute("layout.delete", &json!({"name": "Sheet A (2)"})).is_err(), "last layout stays");
+        let l = s.execute("layout", &json!({"option": "list"})).unwrap();
+        assert_eq!(l.as_array().unwrap().len(), 1);
+        assert!(s.execute("layout.delete", &json!({"name": "Model"})).is_err());
+    }
+
+    #[test]
+    fn new_layout_from_the_menu_asks_for_a_name() {
+        let mut s = session_with_model();
+        s.start("layout.new").unwrap();
+        assert_eq!(s.current_prompt().map(|p| p.display()).as_deref(), Some("Enter name of new layout <Layout3>:"));
+        s.cmdline("Layout1").unwrap();
+        assert!(s.running.is_some(), "a taken name asks again");
+        s.cmdline("Sheet A").unwrap();
+        assert!(s.running.is_none());
+        s.start("layout.new").unwrap();
+        s.cmdline("").unwrap();
+        let d = s.doc().unwrap();
+        assert!(d.layout("Sheet A").is_some() && d.layout("Layout3").is_some(), "Enter takes the default name");
+    }
+
+    #[test]
+    fn mview_arrangements_and_interactive() {
+        let mut s = session_with_model();
+        assert!(s.execute("mview", &json!({"p1": [0, 0], "p2": [1, 1]})).is_err(), "not in model space");
+        s.execute("mview", &json!({"layout": "Layout2", "count": 4})).unwrap();
+        assert_eq!(viewports(&s, "Layout2").len(), 4);
+        s.execute("vports.3", &json!({"layout": "Layout2", "p1": [0, 0], "p2": [9, 6]})).unwrap();
+        let v = viewports(&s, "Layout2");
+        assert_eq!(v.len(), 7);
+        let total: f64 = v[4..].iter().map(|(_, v)| v.width * v.height).sum();
+        assert!((total - 54.0).abs() < 1e-9, "three viewports tile the window");
+        // Interactive MVIEW: two corners.
+        s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
+        s.cmdline("mview").unwrap();
+        s.cmdline("1,1").unwrap();
+        s.cmdline("6,4").unwrap();
+        assert!(s.running.is_none());
+        let v = viewports(&s, "Layout1");
+        assert_eq!(v.len(), 1);
+        assert!((v[0].1.width - 5.0).abs() < 1e-9 && (v[0].1.height - 3.0).abs() < 1e-9);
+        // MVIEW 2 → arrangement (Enter: Vertical) → Fit (Enter).
+        s.cmdline("mview").unwrap();
+        s.cmdline("2").unwrap();
+        s.cmdline("").unwrap();
+        s.cmdline("").unwrap();
+        assert!(s.running.is_none());
+        assert_eq!(viewports(&s, "Layout1").len(), 3);
+        // One undo step per MVIEW.
+        s.undo().unwrap();
+        assert_eq!(viewports(&s, "Layout1").len(), 1);
+        // In model space the interactive command ends at once.
+        s.execute("layout.set", &json!({"name": "Model"})).unwrap();
+        s.cmdline("vports.4").unwrap();
+        assert!(s.running.is_none());
+    }
+
+    #[test]
+    fn viewport_scale_lock_and_layers() {
+        let mut s = session_with_model();
+        s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
+        let r = s.execute("mview", &json!({"p1": [1, 1], "p2": [5, 4]})).unwrap();
+        let h = r["viewports"][0].as_str().unwrap().to_string();
+        let out = s.execute("viewport.set", &json!({"handle": h, "scale": "1:20", "center": [50, 20]})).unwrap();
+        assert!((out[0]["viewHeight"].as_f64().unwrap() - 60.0).abs() < 1e-9);
+        assert!((out[0]["scale"].as_f64().unwrap() - 0.05).abs() < 1e-12);
+        s.execute("viewport.set", &json!({"handle": h, "locked": true})).unwrap();
+        assert!(s.execute("viewport.set", &json!({"handle": h, "scale": 0.1})).is_err(), "locked");
+        s.execute("viewport.set", &json!({"handle": h, "scale": 0.1, "locked": false})).unwrap();
+        s.execute("vplayer", &json!({"handle": h, "freeze": ["0", "Walls"]})).unwrap();
+        s.execute("vplayer", &json!({"handle": h, "thaw": "walls"})).unwrap();
+        let v = viewports(&s, "Layout1");
+        assert_eq!(v[0].1.frozen_layers, vec!["0".to_string()]);
+        s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": "red"}})).unwrap();
+        assert!(s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": "bylayer"}})).is_err());
+        assert!(s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": [1]}})).is_err());
+        let vv = viewports(&s, "Layout1");
+        assert_eq!(vv[0].1.layer_colors, vec![("Walls".to_string(), cadcraft_color::Color::Index(1))]);
+        s.execute("vplayer", &json!({"handle": h, "colors": {"walls": null}})).unwrap();
+        assert!(viewports(&s, "Layout1")[0].1.layer_colors.is_empty());
+        assert!((v[0].1.view_height - 30.0).abs() < 1e-9);
+        // Layer 0 frozen in the viewport: nothing of the model shows.
+        let list = cadcraft_render::build(s.doc().unwrap(), &Space::Paper("Layout1".into()), &cadcraft_render::Options::default());
+        assert!(list.prims.iter().all(|p| p.handle != cadcraft_render::VIEWPORT_CONTENT));
+        for bad_p in [
+            json!({"handle": h, "scale": "0:0"}),
+            json!({"handle": h, "scale": -1}),
+            json!({"handle": h, "viewHeight": 0}),
+            json!({"handle": "FFFFFF"}),
+        ] {
+            assert!(s.execute("viewport.set", &bad_p).is_err(), "{bad_p}");
+        }
+    }
+
+    #[test]
+    fn pagesetup_paper_table() {
+        let mut s = Session::new();
+        let r = s.execute("pagesetup", &json!({"layout": "Layout1", "paper": "A3", "landscape": true, "margins": [5, 5, 5, 5]})).unwrap();
+        assert_eq!(r["page"]["widthMm"], 297.0);
+        let sheet = cadcraft_render::sheet(s.doc().unwrap(), "Layout1").unwrap();
+        // Imperial drawing: paper units are inches.
+        assert!((sheet.size.x - 420.0 / 25.4).abs() < 1e-9 && (sheet.size.y - 297.0 / 25.4).abs() < 1e-9);
+        assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "paper": "Z12"})).is_err());
+        assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "margins": [1, 2]})).is_err());
+        assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "width": 1e308, "height": 5})).is_err());
+        assert!(s.execute("pagesetup", &json!({"paper": "A4"})).is_err(), "model tab needs a layout");
+        for area in ["extents", "display", "window", "limits"] {
+            let e = s.execute("pagesetup", &json!({"layout": "Layout1", "plotArea": area})).unwrap_err();
+            assert!(e.to_string().contains("not available yet"), "{area}: {e}");
+        }
+        let r = s.execute("pagesetup", &json!({"layout": "Layout1", "plotArea": "Layout"})).unwrap();
+        assert_eq!(r["page"]["plotArea"], "layout");
+        let report = s.execute("pagesetup", &Value::Null).unwrap();
+        assert!(report["papers"].as_array().unwrap().len() >= 10);
+        s.execute("pagesetup", &json!({"layout": "Layout2", "width": 500, "height": 300})).unwrap();
+        let p = &s.doc().unwrap().layout("Layout2").unwrap().page;
+        assert_eq!((p.width_mm, p.height_mm), (300.0, 500.0));
+    }
+
+    fn fake_plot(d: &Drawing, space: &Space, opts: &Value) -> std::result::Result<Vec<u8>, String> {
+        let _ = d;
+        Ok(format!("%PDF-1.4 fake {space:?} {opts}").into_bytes())
+    }
+
+    #[test]
+    fn plot_goes_through_the_hook() {
+        super::super::file::set_io(super::super::file::IoHooks {
+            read: |_, _| Err("no reader in tests".into()),
+            write: |_, _| Err("no writer in tests".into()),
+            plot: Some(fake_plot),
+        });
+        let mut s = session_with_model();
+        if io().and_then(|h| h.plot).is_none() {
+            return; // another test installed hooks without a plotter first
+        }
+        let r = s.execute("plot", &json!({"layout": "Layout1", "paper": "A4"})).unwrap();
+        let data = super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap();
+        let text = String::from_utf8(data).unwrap();
+        assert!(text.starts_with("%PDF") && text.contains("Paper(\"Layout1\")") && text.contains("A4"));
+        let r = s.execute("exportpdf", &json!({})).unwrap();
+        assert_eq!(r["layout"], "Model");
+        let baseline = String::from_utf8(super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap()).unwrap();
+        assert!(!baseline.contains("\"center\"") && !baseline.contains("\"offset\""), "omitted options remain omitted: {baseline}");
+        assert!(s.execute("plot", &json!({"layout": "Nope"})).is_err());
+        // Plot area and a ratio scale reach the plotter as a model-space window and a number.
+        let opts = |r: Value| String::from_utf8(super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap()).unwrap();
+        let p = json!({"layout": "Model", "plotArea": "window", "window": [[10, 0], [0, 5]], "fit": false, "scale": "1:2"});
+        let text = opts(s.execute("plot", &p).unwrap());
+        assert!(text.contains(r#""window":[[0.0,0.0],[10.0,5.0]]"#) && text.contains(r#""scale":0.5"#), "{text}");
+        let text = opts(s.execute("plot", &json!({"layout": "Model", "center": false, "offset": [12.5, -7.0]})).unwrap());
+        assert!(text.contains(r#""center":false"#) && text.contains(r#""offset":[12.5,-7.0]"#), "{text}");
+        for offset in [json!([1]), json!([1, 2, 3]), json!([f64::NAN, 0]), json!([100_001, 0])] {
+            assert!(s.execute("plot", &json!({"layout": "Model", "center": false, "offset": offset})).is_err());
+        }
+        assert!(s.execute("plot", &json!({"layout": "Model", "output": "svg", "center": false, "offset": [0, 0]})).is_err());
+        assert!(opts(s.execute("plot", &json!({"layout": "Model", "plotArea": "limits"})).unwrap()).contains(r#""window":[[0.0,0.0],"#));
+        assert!(s.execute("plot", &json!({"layout": "Model", "plotArea": "window"})).is_err(), "window needs corners");
+        assert!(s.execute("plot", &json!({"layout": "Layout1", "plotArea": "display"})).is_err(), "layouts plot their sheet");
+        assert!(s.execute("plot", &json!({"layout": "Model", "scale": -1})).is_err());
+        #[cfg(not(target_arch = "wasm32"))]
+        {
+            let path = std::env::temp_dir().join(format!("cadcraft-plot-test-{}.pdf", std::process::id()));
+            let ps = path.to_string_lossy().to_string();
+            let r = s.execute("plot", &json!({"path": ps})).unwrap();
+            assert!(r["bytes"].as_u64().unwrap() > 0);
+            assert!(std::fs::read(&path).unwrap().starts_with(b"%PDF"));
+            let _ = std::fs::remove_file(&path);
+        }
+    }
+
+    #[test]
+    fn hostile_layout_params() {
+        let mut s = session_with_model();
+        let long = "x".repeat(300);
+        for (c, p) in [
+            ("layout.new", json!({"name": ""})),
+            ("layout.new", json!({"name": long})),
+            ("layout.new", json!({"name": "a\u{0}b"})),
+            ("layout.new", json!({"name": "Layout1"})),
+            ("mview", json!({"layout": "Layout1", "p1": [1e308, -1e308], "p2": [-1e308, 1e308]})),
+            ("mview", json!({"layout": "Layout1", "p1": [1, 1], "p2": [1, 1]})),
+            ("mview", json!({"layout": "Layout1", "count": 99})),
+            ("mview", json!({"layout": "Layout1", "count": -1})),
+            ("layout.rename", json!({"from": "Layout1"})),
+            ("layout.copy", json!({"from": "nope"})),
+            ("viewport.set", json!({"handles": ["zz"]})),
+        ] {
+            assert!(s.execute(c, &p).is_err(), "{c} {p}");
+        }
+    }
+
+    #[test]
+    fn mspace_edits_model_through_viewport() {
+        let mut s = session_with_model();
+        let before = s.doc().unwrap().model.len();
+        s.execute("layout.new", &json!({"name": "L"})).unwrap();
+        s.execute("layout.set", &json!({"name": "L"})).unwrap();
+        assert!(s.execute("mspace", &json!({"at": [-1000, -1000]})).is_err());
+        let vps = viewports(&s, "L");
+        let (h, vp) = vps.iter().find(|(_, v)| v.id != 1).cloned().unwrap();
+        s.execute("mspace", &json!({"at": [vp.center.x, vp.center.y]})).unwrap();
+        assert_eq!(s.space(), Space::Model);
+        assert_eq!(s.layout_space(), Space::Paper("L".into()));
+        // The screen view in MSPACE maps the viewport centre to its model view centre.
+        let st = s.state().unwrap();
+        let (pv, v) = (st.paper_view(), st.view());
+        let k = vp.view_height / vp.height;
+        assert!((v.height - pv.height * k).abs() < 1e-9);
+        // New geometry goes to model space.
+        s.cmdline("circle 10,10 3").unwrap();
+        assert_eq!(s.doc().unwrap().model.len(), before + 1);
+        // Zooming changes the viewport's model view, not the sheet.
+        s.state_mut().unwrap().set_view(crate::View { center: v.center, height: v.height / 2.0 });
+        let vp2 = viewports(&s, "L").into_iter().find(|(x, _)| *x == h).unwrap().1;
+        assert!((vp2.view_height - vp.view_height / 2.0).abs() < 1e-9);
+        assert_eq!(s.state().unwrap().paper_view(), pv);
+        s.execute("pspace", &json!({})).unwrap();
+        assert_eq!(s.space(), Space::Paper("L".into()));
+        s.execute("mspace", &json!({})).unwrap();
+        s.execute("layout.set", &json!({"name": "Model"})).unwrap();
+        assert!(s.state().unwrap().mspace.is_none());
+    }
+}
@@ -25,8 +25,6 @@ enum Stage {
    RenameFrom,
    RenameTo(String),
    Set,
-    SaveasLayout,
-    SaveasFile(String),
    List,
 }

@@ -36,7 +34,7 @@ pub struct LayoutM {
 }

 /// The layout the name prompts default to: the current one, else the first tab.
-pub(super) fn current_layout(s: &Session) -> Option<String> {
+fn current_layout(s: &Session) -> Option<String> {
    if let Space::Paper(n) = s.layout_space() {
        return Some(n);
    }
@@ -72,10 +70,9 @@ impl LayoutM {
            "New" => Stage::New,
            "Rename" => Stage::RenameFrom,
            "Set" => Stage::Set,
-            "SAveas" => Stage::SaveasLayout,
            "?" => Stage::List,
            other => {
-                // Template: report and end, leaving the next input to the command line.
+                // Template, SAveas: report and end, leaving the next input to the command line.
                s.echo(format!("LAYOUT {other} is not available yet."));
                return Ok(Step::Done);
            }
@@ -134,8 +131,6 @@ impl Interactive for LayoutM {
                let tab = s.layout_space().tab_name().to_string();
                Prompt::new("Enter layout to make current", Accept::TEXT).default(tab)
            }
-            Stage::SaveasLayout => with_cur(Prompt::new("Enter layout to save to template", Accept::TEXT)),
-            Stage::SaveasFile(layout) => Prompt::new("Enter template file name", Accept::TEXT).default(super::saveas::default_path(s, layout)),
            Stage::List => Prompt::new("Enter layout name(s) to list", Accept::TEXT).default("*"),
        }
    }
@@ -204,19 +199,6 @@ impl Interactive for LayoutM {
                (set.run)(s, &json!({ "name": n })).map_err(retry)?;
                Ok(Step::Done)
            }
-            Stage::SaveasLayout => {
-                let n = need(name.or_else(|| current_layout(s)))?;
-                let n = super::layout_name("layout.saveas", s.doc()?, &n).map_err(retry)?;
-                self.stage = Stage::SaveasFile(n);
-                Ok(Step::Continue)
-            }
-            Stage::SaveasFile(layout) => {
-                let path = name.unwrap_or_else(|| super::saveas::default_path(s, &layout));
-                let r = super::saveas::run_saveas(s, &json!({ "name": layout, "path": path })).map_err(retry)?;
-                let path = r.get("path").and_then(Value::as_str).unwrap_or_default();
-                s.echo(format!("Layout \"{layout}\" saved to template \"{path}\"."));
-                Ok(Step::Done)
-            }
            Stage::List => {
                Self::list(s, name.as_deref().unwrap_or("*"))?;
                Ok(Step::Done)
@@ -1,133 +0,0 @@
-//! LAYOUT SAveas: a layout written to a drawing template file (`.dwt`, or a `.dwg` or `.dxf`).
-//!
-//! The template holds the layout's page setup and paper space objects, viewports included, and
-//! no model space objects and no other layout. Named objects the layout does not use (blocks,
-//! layers, linetypes, text, dimension, multileader, multiline and table styles, empty groups)
-//! are left out, as PURGE All removes them; layers the layout's viewports freeze or recolor stay.
-//! The open drawing is not changed.
-
-use std::collections::BTreeSet;
-
-use cadcraft_doc::{Common, Drawing, Entity, EntityKind, EntityStore, Point};
-use cadcraft_geom::Vec3;
-use serde_json::{Value, json};
-
-use super::super::file::{drops_unknown, io, not_saved, not_saved_message};
-use super::super::{bad, str_param};
-use super::layout_name;
-use super::prompts::current_layout;
-use crate::{Result, Session};
-
-/// File types a layout template is written as; a path without an extension gets `.dwt`.
-const TEMPLATE_TYPES: [&str; 3] = ["dwt", "dwg", "dxf"];
-
-/// The most PURGE All passes run on a template; they stop at the first pass that purges nothing.
-const MAX_PURGE_PASSES: usize = 64;
-
-/// The file a SAveas typed at the command line suggests: `<layout>.dwt` beside the drawing.
-pub(super) fn default_path(s: &Session, layout: &str) -> String {
-    let file = format!("{layout}.dwt");
-    match s.state().ok().and_then(|st| st.path.clone()) {
-        Some(p) => std::path::Path::new(&p).with_file_name(&file).to_string_lossy().into_owned(),
-        None => file,
-    }
-}
-
-/// `path` with `.dwt` added when it has no extension; an error for any other file type.
-fn template_path(path: &str) -> Result<String> {
-    let path = path.trim();
-    if path.is_empty() {
-        return Err(bad("layout.saveas", "`path` is empty"));
-    }
-    match std::path::Path::new(path).extension() {
-        None => Ok(format!("{path}.dwt")),
-        Some(e) if TEMPLATE_TYPES.iter().any(|t| e.eq_ignore_ascii_case(t)) => Ok(path.to_string()),
-        Some(_) => Err(bad("layout.saveas", "a layout template is saved as a .dwt, .dwg or .dxf file")),
-    }
-}
-
-/// The drawing a template of `layout` holds: `d` with that layout alone, an empty model space,
-/// and without the named objects nothing left in it uses.
-fn template_of(d: &Drawing, layout: &str) -> Result<Drawing> {
-    let mut t = d.clone();
-    t.layouts.retain(|l| l.name == layout);
-    t.active_layout = Some(layout.to_string());
-    t.model = EntityStore::new();
-    t.hidden_objects.clear();
-    let gone: Vec<u32> = t.constraints.iter().filter(|c| c.refs.iter().any(|r| t.entity(r.handle).is_none())).map(|c| c.id).collect();
-    t.constraints.retain(|c| !gone.contains(&c.id));
-    // Layers the layout's viewports freeze or recolor stay, with those settings. PURGE counts
-    // only objects, so each such layer gets a point in model space while PURGE runs.
-    let named: BTreeSet<String> = t
-        .layouts
-        .iter()
-        .flat_map(|l| l.entities.iter())
-        .filter_map(|e| match &e.kind {
-            EntityKind::Viewport(v) => Some(v.frozen_layers.iter().cloned().chain(v.layer_colors.iter().map(|(n, _)| n.clone())).collect::<Vec<_>>()),
-            _ => None,
-        })
-        .flatten()
-        .collect();
-    for layer in named {
-        let handle = t.new_handle();
-        t.model.push(Entity { handle, common: Common { layer, ..Common::default() }, kind: EntityKind::Point(Point { p: Vec3::ZERO, angle: 0.0 }) });
-    }
-    // PURGE runs on a session of its own, so the open drawing keeps everything.
-    let mut scratch = Session::empty();
-    scratch.open_drawing(t, layout, None);
-    for _ in 0..MAX_PURGE_PASSES {
-        let r = super::super::blocks::purge::run(&mut scratch, &json!({ "type": "all" }))?;
-        let purged = r.get("purged").and_then(Value::as_object).is_some_and(|o| o.values().any(|v| v.as_array().is_some_and(|a| !a.is_empty())));
-        if !purged {
-            break;
-        }
-    }
-    let st = scratch.docs.pop().ok_or_else(|| bad("layout.saveas", "the template could not be made"))?;
-    let mut t = std::sync::Arc::unwrap_or_clone(st.doc);
-    t.model = EntityStore::new();
-    Ok(t)
-}
-
-/// `layout.saveas {name?, path}`: write a layout as a drawing template.
-pub(super) fn run_saveas(s: &mut Session, p: &Value) -> Result<Value> {
-    let path = template_path(str_param(p, "path").ok_or_else(|| bad("layout.saveas", "`path` is required"))?)?;
-    if s.doc()?.refedit.is_some() {
-        return Err(bad("layout.saveas", "A block reference is being edited in place: finish with REFCLOSE (Save or Discard) before saving."));
-    }
-    let name = match str_param(p, "name") {
-        Some(n) => n.to_string(),
-        None => current_layout(s).ok_or_else(|| bad("layout.saveas", "the drawing has no layout"))?,
-    };
-    // A file is the drawing outside the Block Editor.
-    let d = s.state()?.drawing();
-    let name = layout_name("layout.saveas", d, &name)?;
-    let t = template_of(d, &name)?;
-    let hooks = io().ok_or_else(|| bad("layout.saveas", "file formats are not available in this build"))?;
-    let bytes = (hooks.write)(&t, &path).map_err(|e| bad("layout.saveas", e))?;
-    store(&path, &bytes)?;
-    let mut r = json!({ "name": name, "path": path, "bytes": bytes.len() });
-    let lost = not_saved(&t);
-    if drops_unknown(&path)
-        && let Some(msg) = not_saved_message(&lost)
-    {
-        s.echo(msg);
-        if let Some(o) = r.as_object_mut() {
-            o.insert("notSaved".into(), json!(lost));
-        }
-    }
-    Ok(r)
-}
-
-/// Write the template: natively to `path` through a temporary file; on the web as a download.
-fn store(path: &str, bytes: &[u8]) -> Result<()> {
-    #[cfg(not(target_arch = "wasm32"))]
-    {
-        // Exclusively create a fresh temporary file and rename it into place so a planted
-        // `<path>.cadcraft-tmp` symlink cannot redirect the write (CWE-59).
-        crate::atomic_write::write_atomic(std::path::Path::new(path), bytes).map_err(|e| bad("layout.saveas", format!("{path}: {e}")))
-    }
-    #[cfg(target_arch = "wasm32")]
-    {
-        super::super::exchange::deliver_file("layout.saveas", path, bytes, super::super::file::deliver())
-    }
-}
@@ -1,295 +0,0 @@
-use super::*;
-
-fn session_with_model() -> Session {
-    let mut s = Session::new();
-    s.cmdline("line 0,0 100,0").unwrap();
-    s.cmdline("").unwrap();
-    s.cmdline("circle 50,25 20").unwrap();
-    s
-}
-
-fn viewports(s: &Session, layout: &str) -> Vec<(Handle, Viewport)> {
-    s.doc()
-        .unwrap()
-        .layout(layout)
-        .unwrap()
-        .entities
-        .iter()
-        .filter_map(|e| if let EntityKind::Viewport(v) = &e.kind { Some((e.handle, v.clone())) } else { None })
-        .collect()
-}
-
-#[test]
-fn new_layout_gets_viewport_zoomed_to_extents() {
-    let mut s = session_with_model();
-    let r = s.execute("layout.new", &json!({})).unwrap();
-    assert_eq!(r["name"], "Layout3");
-    let vps = viewports(&s, "Layout3");
-    assert_eq!(vps.len(), 1);
-    let (_, v) = &vps[0];
-    let sheet = cadcraft_render::sheet(s.doc().unwrap(), "Layout3").unwrap();
-    assert!((v.width - sheet.printable.width()).abs() < 1e-9 && (v.height - sheet.printable.height()).abs() < 1e-9);
-    assert!(v.id >= 2);
-    // Model extents (0,0)..(100,45) are centred and fully visible.
-    assert!(v.view_center.near(Vec2::new(50.0, 22.5), 1e-6));
-    let model_w = v.view_height * v.width / v.height;
-    assert!(model_w >= 100.0 && v.view_height >= 45.0);
-    // The render shows model geometry inside the viewport only.
-    let list = cadcraft_render::build(s.doc().unwrap(), &Space::Paper("Layout3".into()), &cadcraft_render::Options::default());
-    let rect = Bounds2::new(v.center.xy() - Vec2::new(v.width, v.height) / 2.0, v.center.xy() + Vec2::new(v.width, v.height) / 2.0).expand(1e-9);
-    let content: Vec<_> = list.prims.iter().filter(|p| p.handle == cadcraft_render::VIEWPORT_CONTENT).collect();
-    assert!(content.len() >= 2);
-    assert!(content.iter().all(|p| list.points(p).iter().all(|q| rect.contains(*q))));
-    assert!(list.sheet.is_some());
-    // Undo removes the layout.
-    s.undo().unwrap();
-    assert!(s.doc().unwrap().layout("Layout3").is_none());
-}
-
-#[test]
-fn rename_keeps_the_active_layout_whatever_its_case() {
-    let mut s = session_with_model();
-    s.doc_mut().unwrap().active_layout = Some("layout1".into());
-    s.execute("layout.rename", &json!({"from": "Layout1", "to": "Sheet A"})).unwrap();
-    assert_eq!(s.doc().unwrap().active_layout.as_deref(), Some("Sheet A"));
-}
-
-#[test]
-fn rename_copy_delete() {
-    let mut s = session_with_model();
-    s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
-    s.execute("layout.rename", &json!({"to": "Sheet A"})).unwrap();
-    assert_eq!(s.space(), Space::Paper("Sheet A".into()));
-    assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "Layout2"})).is_err(), "duplicate");
-    assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "a/b"})).is_err(), "bad char");
-    assert!(s.execute("layout.rename", &json!({"from": "Sheet A", "to": "model"})).is_err(), "reserved");
-    s.execute("mview", &json!({"p1": [1, 1], "p2": [5, 4]})).unwrap();
-    let r = s.execute("layout.copy", &json!({"from": "Sheet A"})).unwrap();
-    assert_eq!(r["name"], "Sheet A (2)");
-    let a = viewports(&s, "Sheet A");
-    let b = viewports(&s, "Sheet A (2)");
-    assert_eq!(a.len(), 1);
-    assert_eq!(b.len(), 1);
-    assert_ne!(a[0].0, b[0].0, "copied entities get new handles");
-    s.execute("layout.delete", &json!({"name": "sheet a"})).unwrap();
-    assert_eq!(s.space(), Space::Model, "deleting the current layout returns to Model");
-    s.execute("layout", &json!({"option": "delete", "name": "Layout2"})).unwrap();
-    assert!(s.execute("layout.delete", &json!({"name": "Sheet A (2)"})).is_err(), "last layout stays");
-    let l = s.execute("layout", &json!({"option": "list"})).unwrap();
-    assert_eq!(l.as_array().unwrap().len(), 1);
-    assert!(s.execute("layout.delete", &json!({"name": "Model"})).is_err());
-}
-
-#[test]
-fn new_layout_from_the_menu_asks_for_a_name() {
-    let mut s = session_with_model();
-    s.start("layout.new").unwrap();
-    assert_eq!(s.current_prompt().map(|p| p.display()).as_deref(), Some("Enter name of new layout <Layout3>:"));
-    s.cmdline("Layout1").unwrap();
-    assert!(s.running.is_some(), "a taken name asks again");
-    s.cmdline("Sheet A").unwrap();
-    assert!(s.running.is_none());
-    s.start("layout.new").unwrap();
-    s.cmdline("").unwrap();
-    let d = s.doc().unwrap();
-    assert!(d.layout("Sheet A").is_some() && d.layout("Layout3").is_some(), "Enter takes the default name");
-}
-
-#[test]
-fn mview_arrangements_and_interactive() {
-    let mut s = session_with_model();
-    assert!(s.execute("mview", &json!({"p1": [0, 0], "p2": [1, 1]})).is_err(), "not in model space");
-    s.execute("mview", &json!({"layout": "Layout2", "count": 4})).unwrap();
-    assert_eq!(viewports(&s, "Layout2").len(), 4);
-    s.execute("vports.3", &json!({"layout": "Layout2", "p1": [0, 0], "p2": [9, 6]})).unwrap();
-    let v = viewports(&s, "Layout2");
-    assert_eq!(v.len(), 7);
-    let total: f64 = v[4..].iter().map(|(_, v)| v.width * v.height).sum();
-    assert!((total - 54.0).abs() < 1e-9, "three viewports tile the window");
-    // Interactive MVIEW: two corners.
-    s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
-    s.cmdline("mview").unwrap();
-    s.cmdline("1,1").unwrap();
-    s.cmdline("6,4").unwrap();
-    assert!(s.running.is_none());
-    let v = viewports(&s, "Layout1");
-    assert_eq!(v.len(), 1);
-    assert!((v[0].1.width - 5.0).abs() < 1e-9 && (v[0].1.height - 3.0).abs() < 1e-9);
-    // MVIEW 2 → arrangement (Enter: Vertical) → Fit (Enter).
-    s.cmdline("mview").unwrap();
-    s.cmdline("2").unwrap();
-    s.cmdline("").unwrap();
-    s.cmdline("").unwrap();
-    assert!(s.running.is_none());
-    assert_eq!(viewports(&s, "Layout1").len(), 3);
-    // One undo step per MVIEW.
-    s.undo().unwrap();
-    assert_eq!(viewports(&s, "Layout1").len(), 1);
-    // In model space the interactive command ends at once.
-    s.execute("layout.set", &json!({"name": "Model"})).unwrap();
-    s.cmdline("vports.4").unwrap();
-    assert!(s.running.is_none());
-}
-
-#[test]
-fn viewport_scale_lock_and_layers() {
-    let mut s = session_with_model();
-    s.execute("layout.set", &json!({"name": "Layout1"})).unwrap();
-    let r = s.execute("mview", &json!({"p1": [1, 1], "p2": [5, 4]})).unwrap();
-    let h = r["viewports"][0].as_str().unwrap().to_string();
-    let out = s.execute("viewport.set", &json!({"handle": h, "scale": "1:20", "center": [50, 20]})).unwrap();
-    assert!((out[0]["viewHeight"].as_f64().unwrap() - 60.0).abs() < 1e-9);
-    assert!((out[0]["scale"].as_f64().unwrap() - 0.05).abs() < 1e-12);
-    s.execute("viewport.set", &json!({"handle": h, "locked": true})).unwrap();
-    assert!(s.execute("viewport.set", &json!({"handle": h, "scale": 0.1})).is_err(), "locked");
-    s.execute("viewport.set", &json!({"handle": h, "scale": 0.1, "locked": false})).unwrap();
-    s.execute("vplayer", &json!({"handle": h, "freeze": ["0", "Walls"]})).unwrap();
-    s.execute("vplayer", &json!({"handle": h, "thaw": "walls"})).unwrap();
-    let v = viewports(&s, "Layout1");
-    assert_eq!(v[0].1.frozen_layers, vec!["0".to_string()]);
-    s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": "red"}})).unwrap();
-    assert!(s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": "bylayer"}})).is_err());
-    assert!(s.execute("vplayer", &json!({"handle": h, "colors": {"Walls": [1]}})).is_err());
-    let vv = viewports(&s, "Layout1");
-    assert_eq!(vv[0].1.layer_colors, vec![("Walls".to_string(), cadcraft_color::Color::Index(1))]);
-    s.execute("vplayer", &json!({"handle": h, "colors": {"walls": null}})).unwrap();
-    assert!(viewports(&s, "Layout1")[0].1.layer_colors.is_empty());
-    assert!((v[0].1.view_height - 30.0).abs() < 1e-9);
-    // Layer 0 frozen in the viewport: nothing of the model shows.
-    let list = cadcraft_render::build(s.doc().unwrap(), &Space::Paper("Layout1".into()), &cadcraft_render::Options::default());
-    assert!(list.prims.iter().all(|p| p.handle != cadcraft_render::VIEWPORT_CONTENT));
-    for bad_p in
-        [json!({"handle": h, "scale": "0:0"}), json!({"handle": h, "scale": -1}), json!({"handle": h, "viewHeight": 0}), json!({"handle": "FFFFFF"})]
-    {
-        assert!(s.execute("viewport.set", &bad_p).is_err(), "{bad_p}");
-    }
-}
-
-#[test]
-fn pagesetup_paper_table() {
-    let mut s = Session::new();
-    let r = s.execute("pagesetup", &json!({"layout": "Layout1", "paper": "A3", "landscape": true, "margins": [5, 5, 5, 5]})).unwrap();
-    assert_eq!(r["page"]["widthMm"], 297.0);
-    let sheet = cadcraft_render::sheet(s.doc().unwrap(), "Layout1").unwrap();
-    // Imperial drawing: paper units are inches.
-    assert!((sheet.size.x - 420.0 / 25.4).abs() < 1e-9 && (sheet.size.y - 297.0 / 25.4).abs() < 1e-9);
-    assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "paper": "Z12"})).is_err());
-    assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "margins": [1, 2]})).is_err());
-    assert!(s.execute("pagesetup", &json!({"layout": "Layout1", "width": 1e308, "height": 5})).is_err());
-    assert!(s.execute("pagesetup", &json!({"paper": "A4"})).is_err(), "model tab needs a layout");
-    for area in ["extents", "display", "window", "limits"] {
-        let e = s.execute("pagesetup", &json!({"layout": "Layout1", "plotArea": area})).unwrap_err();
-        assert!(e.to_string().contains("not available yet"), "{area}: {e}");
-    }
-    let r = s.execute("pagesetup", &json!({"layout": "Layout1", "plotArea": "Layout"})).unwrap();
-    assert_eq!(r["page"]["plotArea"], "layout");
-    let report = s.execute("pagesetup", &Value::Null).unwrap();
-    assert!(report["papers"].as_array().unwrap().len() >= 10);
-    s.execute("pagesetup", &json!({"layout": "Layout2", "width": 500, "height": 300})).unwrap();
-    let p = &s.doc().unwrap().layout("Layout2").unwrap().page;
-    assert_eq!((p.width_mm, p.height_mm), (300.0, 500.0));
-}
-
-fn fake_plot(d: &Drawing, space: &Space, opts: &Value) -> std::result::Result<Vec<u8>, String> {
-    let _ = d;
-    Ok(format!("%PDF-1.4 fake {space:?} {opts}").into_bytes())
-}
-
-#[test]
-fn plot_goes_through_the_hook() {
-    super::super::file::set_io(super::super::file::IoHooks {
-        read: |_, _| Err("no reader in tests".into()),
-        write: |_, _| Err("no writer in tests".into()),
-        plot: Some(fake_plot),
-    });
-    let mut s = session_with_model();
-    if io().and_then(|h| h.plot).is_none() {
-        return; // another test installed hooks without a plotter first
-    }
-    let r = s.execute("plot", &json!({"layout": "Layout1", "paper": "A4"})).unwrap();
-    let data = super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap();
-    let text = String::from_utf8(data).unwrap();
-    assert!(text.starts_with("%PDF") && text.contains("Paper(\"Layout1\")") && text.contains("A4"));
-    let r = s.execute("exportpdf", &json!({})).unwrap();
-    assert_eq!(r["layout"], "Model");
-    let baseline = String::from_utf8(super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap()).unwrap();
-    assert!(!baseline.contains("\"center\"") && !baseline.contains("\"offset\""), "omitted options remain omitted: {baseline}");
-    assert!(s.execute("plot", &json!({"layout": "Nope"})).is_err());
-    // Plot area and a ratio scale reach the plotter as a model-space window and a number.
-    let opts = |r: Value| String::from_utf8(super::super::file::base64_decode(r["data"].as_str().unwrap()).unwrap()).unwrap();
-    let p = json!({"layout": "Model", "plotArea": "window", "window": [[10, 0], [0, 5]], "fit": false, "scale": "1:2"});
-    let text = opts(s.execute("plot", &p).unwrap());
-    assert!(text.contains(r#""window":[[0.0,0.0],[10.0,5.0]]"#) && text.contains(r#""scale":0.5"#), "{text}");
-    let text = opts(s.execute("plot", &json!({"layout": "Model", "center": false, "offset": [12.5, -7.0]})).unwrap());
-    assert!(text.contains(r#""center":false"#) && text.contains(r#""offset":[12.5,-7.0]"#), "{text}");
-    for offset in [json!([1]), json!([1, 2, 3]), json!([f64::NAN, 0]), json!([100_001, 0])] {
-        assert!(s.execute("plot", &json!({"layout": "Model", "center": false, "offset": offset})).is_err());
-    }
-    assert!(s.execute("plot", &json!({"layout": "Model", "output": "svg", "center": false, "offset": [0, 0]})).is_err());
-    assert!(opts(s.execute("plot", &json!({"layout": "Model", "plotArea": "limits"})).unwrap()).contains(r#""window":[[0.0,0.0],"#));
-    assert!(s.execute("plot", &json!({"layout": "Model", "plotArea": "window"})).is_err(), "window needs corners");
-    assert!(s.execute("plot", &json!({"layout": "Layout1", "plotArea": "display"})).is_err(), "layouts plot their sheet");
-    assert!(s.execute("plot", &json!({"layout": "Model", "scale": -1})).is_err());
-    #[cfg(not(target_arch = "wasm32"))]
-    {
-        let path = std::env::temp_dir().join(format!("cadcraft-plot-test-{}.pdf", std::process::id()));
-        let ps = path.to_string_lossy().to_string();
-        let r = s.execute("plot", &json!({"path": ps})).unwrap();
-        assert!(r["bytes"].as_u64().unwrap() > 0);
-        assert!(std::fs::read(&path).unwrap().starts_with(b"%PDF"));
-        let _ = std::fs::remove_file(&path);
-    }
-}
-
-#[test]
-fn hostile_layout_params() {
-    let mut s = session_with_model();
-    let long = "x".repeat(300);
-    for (c, p) in [
-        ("layout.new", json!({"name": ""})),
-        ("layout.new", json!({"name": long})),
-        ("layout.new", json!({"name": "a\u{0}b"})),
-        ("layout.new", json!({"name": "Layout1"})),
-        ("mview", json!({"layout": "Layout1", "p1": [1e308, -1e308], "p2": [-1e308, 1e308]})),
-        ("mview", json!({"layout": "Layout1", "p1": [1, 1], "p2": [1, 1]})),
-        ("mview", json!({"layout": "Layout1", "count": 99})),
-        ("mview", json!({"layout": "Layout1", "count": -1})),
-        ("layout.rename", json!({"from": "Layout1"})),
-        ("layout.copy", json!({"from": "nope"})),
-        ("viewport.set", json!({"handles": ["zz"]})),
-    ] {
-        assert!(s.execute(c, &p).is_err(), "{c} {p}");
-    }
-}
-
-#[test]
-fn mspace_edits_model_through_viewport() {
-    let mut s = session_with_model();
-    let before = s.doc().unwrap().model.len();
-    s.execute("layout.new", &json!({"name": "L"})).unwrap();
-    s.execute("layout.set", &json!({"name": "L"})).unwrap();
-    assert!(s.execute("mspace", &json!({"at": [-1000, -1000]})).is_err());
-    let vps = viewports(&s, "L");
-    let (h, vp) = vps.iter().find(|(_, v)| v.id != 1).cloned().unwrap();
-    s.execute("mspace", &json!({"at": [vp.center.x, vp.center.y]})).unwrap();
-    assert_eq!(s.space(), Space::Model);
-    assert_eq!(s.layout_space(), Space::Paper("L".into()));
-    // The screen view in MSPACE maps the viewport centre to its model view centre.
-    let st = s.state().unwrap();
-    let (pv, v) = (st.paper_view(), st.view());
-    let k = vp.view_height / vp.height;
-    assert!((v.height - pv.height * k).abs() < 1e-9);
-    // New geometry goes to model space.
-    s.cmdline("circle 10,10 3").unwrap();
-    assert_eq!(s.doc().unwrap().model.len(), before + 1);
-    // Zooming changes the viewport's model view, not the sheet.
-    s.state_mut().unwrap().set_view(crate::View { center: v.center, height: v.height / 2.0 });
-    let vp2 = viewports(&s, "L").into_iter().find(|(x, _)| *x == h).unwrap().1;
-    assert!((vp2.view_height - vp.view_height / 2.0).abs() < 1e-9);
-    assert_eq!(s.state().unwrap().paper_view(), pv);
-    s.execute("pspace", &json!({})).unwrap();
-    assert_eq!(s.space(), Space::Paper("L".into()));
-    s.execute("mspace", &json!({})).unwrap();
-    s.execute("layout.set", &json!({"name": "Model"})).unwrap();
-    assert!(s.state().unwrap().mspace.is_none());
-}
@@ -793,4 +793,5 @@ impl Interactive for CollectM {
 }

 #[cfg(test)]
+#[path = "mleader_edit_tests.rs"]
 mod tests;
--- a/Show More
+++ b/Show More