fix(engine): read local files for RECOVER, INSERT, IMPORT, COMPARE, NEW, DATALINK and STYLESMANAGER through the capped reader

A path naming an endless device or a FIFO was buffered to EOF before any size check ran, so one short command could exhaust memory or block. These paths now go through capped_read::read_capped, which refuses non-regular files and enforces the byte limit while reading.

crates/engine/src/cmd/audit.rs

@@ -157,7 +157,7 @@ fn write_audit_log(_: &Session, _: &crate::audit::Report) {}
 
 #[cfg(not(target_arch = "wasm32"))]
 fn read_path(cmd: &str, path: &str) -> Result<Vec<u8>> {
-    std::fs::read(path).map_err(|e| bad(cmd, format!("{path}: {e}")))
+    crate::capped_read::read_capped(std::path::Path::new(path), file::MAX_DRAWING_BYTES).map_err(|e| bad(cmd, format!("{path}: {e}")))
 }
 
 #[cfg(target_arch = "wasm32")]

crates/engine/src/cmd/blocks/insert_file.rs

@@ -85,7 +85,8 @@ fn read_drawing(path: &str) -> Result<Drawing> {
 fn read_file(_path: &str) -> Result<Vec<u8>> {
     #[cfg(not(target_arch = "wasm32"))]
     {
-        std::fs::read(_path).map_err(|e| bad("insert", format!("{_path}: {e}")))
+        crate::capped_read::read_capped(std::path::Path::new(_path), crate::cmd::file::MAX_DRAWING_BYTES)
+            .map_err(|e| bad("insert", format!("{_path}: {e}")))
     }
     #[cfg(target_arch = "wasm32")]
     Err(bad("insert", "paths are not available on the web"))

crates/engine/src/cmd/exchange.rs

@@ -204,7 +204,8 @@ fn import_drawing(s: &mut Session, src: &Drawing, at: Vec2, scale: f64, file: &s
 fn read_file(_path: &str) -> Result<Vec<u8>> {
     #[cfg(not(target_arch = "wasm32"))]
     {
-        std::fs::read(_path).map_err(|e| bad("import", format!("{_path}: {e}")))
+        crate::capped_read::read_capped(std::path::Path::new(_path), crate::cmd::file::MAX_DRAWING_BYTES)
+            .map_err(|e| bad("import", format!("{_path}: {e}")))
     }
     #[cfg(target_arch = "wasm32")]
     Err(bad("import", "paths are not available on the web; pass `data`"))

crates/engine/src/cmd/file.rs

@@ -24,7 +24,7 @@ pub use template::{qnew_template, set_qnew_template};
 /// endless device must be rejected before it exhausts memory (CWE-400), so native opens read
 /// through [`crate::capped_read`] rather than buffering to EOF.
 #[cfg(not(target_arch = "wasm32"))]
-const MAX_DRAWING_BYTES: usize = 512 << 20;
+pub(crate) const MAX_DRAWING_BYTES: usize = 512 << 20;
 /// Largest `.scr` script accepted from a local path.
 #[cfg(not(target_arch = "wasm32"))]
 const MAX_SCRIPT_BYTES: usize = 64 << 20;

crates/engine/src/cmd/file/compare.rs

@@ -110,7 +110,7 @@ fn other_drawing(s: &Session, p: &Value) -> Result<(Arc<Drawing>, String)> {
 fn read_path(_path: &str) -> Result<Vec<u8>> {
     #[cfg(not(target_arch = "wasm32"))]
     {
-        std::fs::read(_path).map_err(|e| bad("compare", format!("{_path}: {e}")))
+        crate::capped_read::read_capped(std::path::Path::new(_path), super::MAX_DRAWING_BYTES).map_err(|e| bad("compare", format!("{_path}: {e}")))
     }
     #[cfg(target_arch = "wasm32")]
     Err(bad("compare", "paths are not available on the web: open the other drawing and compare with it by name (`document`)"))

crates/engine/src/cmd/file/template.rs

@@ -73,7 +73,7 @@ fn read_template(path: &str) -> Result<Drawing> {
 
 #[cfg(not(target_arch = "wasm32"))]
 fn read_bytes(path: &str) -> Result<Vec<u8>> {
-    std::fs::read(path).map_err(|e| bad("new", format!("template {path}: {e}")))
+    crate::capped_read::read_capped(std::path::Path::new(path), super::MAX_DRAWING_BYTES).map_err(|e| bad("new", format!("template {path}: {e}")))
 }
 
 #[cfg(target_arch = "wasm32")]

crates/engine/src/cmd/layout/plotstyle.rs

@@ -303,11 +303,9 @@ fn run_stylesmanager(s: &mut Session, p: &Value) -> Result<Value> {
                 (None, Some(_path)) => {
                     #[cfg(not(target_arch = "wasm32"))]
                     {
-                        let meta = std::fs::metadata(_path).map_err(|e| bad(cmd, format!("{_path}: {e}")))?;
-                        if meta.len() > cadcraft_doc::MAX_TABLE_FILE as u64 {
-                            return Err(bad(cmd, format!("{_path}: the plot style table file is too large")));
-                        }
-                        std::fs::read_to_string(_path).map_err(|e| bad(cmd, format!("{_path}: {e}")))?
+                        let bytes = crate::capped_read::read_capped(std::path::Path::new(_path), cadcraft_doc::MAX_TABLE_FILE)
+                            .map_err(|e| bad(cmd, format!("{_path}: {e}")))?;
+                        String::from_utf8(bytes).map_err(|e| bad(cmd, format!("{_path}: {e}")))?
                     }
                     #[cfg(target_arch = "wasm32")]
                     return Err(bad(cmd, "files can't be read here: pass `text`"));

crates/engine/src/cmd/table/breaks.rs

@@ -12,7 +12,7 @@ use crate::{Accept, Input, Interactive, Prompt, Result, Session, Step};
 
 /// Largest linked file read (bytes).
 #[cfg(not(target_arch = "wasm32"))]
-const MAX_LINK_BYTES: u64 = 8 << 20;
+const MAX_LINK_BYTES: usize = 8 << 20;
 
 pub fn specs() -> Vec<CommandSpec> {
     vec![
@@ -238,11 +238,9 @@ fn read_link(id: &str, file: &std::path::Path) -> Result<String> {
     let path = file.display();
     #[cfg(not(target_arch = "wasm32"))]
     {
-        let meta = std::fs::metadata(file).map_err(|e| bad(id, format!("{path}: {e}")))?;
-        if meta.len() > MAX_LINK_BYTES {
-            return Err(bad(id, format!("{path}: larger than {} MB", MAX_LINK_BYTES >> 20)));
-        }
-        let bytes = std::fs::read(file).map_err(|e| bad(id, format!("{path}: {e}")))?;
+        // The limit is enforced on the bytes read, not on reported metadata, so a device or FIFO
+        // that misreports its length can't be buffered to EOF.
+        let bytes = crate::capped_read::read_capped(file, MAX_LINK_BYTES).map_err(|e| bad(id, format!("{path}: {e}")))?;
         let text = String::from_utf8_lossy(&bytes);
         Ok(text.strip_prefix('\u{feff}').unwrap_or(&text).to_owned())
     }
@@ -370,6 +368,16 @@ fn run_update(s: &mut Session, p: &Value) -> Result<Value> {
 mod tests {
     use super::*;
 
+    /// A linked path naming an endless device is refused instead of buffered to EOF.
+    #[cfg(all(unix, not(target_arch = "wasm32")))]
+    #[test]
+    fn link_to_endless_device_is_rejected() {
+        let dev = std::path::Path::new("/dev/zero");
+        if dev.exists() {
+            assert!(read_link("datalink", dev).is_err());
+        }
+    }
+
     #[test]
     fn csv_parsing() {
         assert_eq!(parse_csv("a,b\r\n\"c,d\",\"e\"\"f\"\n", ','), vec![vec!["a", "b"], vec!["c,d", "e\"f"]]);

crates/geom/src/curve.rs

@@ -484,9 +484,6 @@ pub struct Polyline {
     pub closed: bool,
 }
 
-/// Sampled points one [`Polyline::tessellate`] call produces before arcs become chords.
-pub const MAX_TESSELLATED_POINTS: usize = 4_000_000;
-
 impl Polyline {
     pub fn from_points(pts: &[Vec2], closed: bool) -> Self {
         Polyline { vertices: pts.iter().map(|p| PolyVertex::new(*p)).collect(), closed }
@@ -519,24 +516,10 @@ impl Polyline {
         b
     }
     pub fn tessellate(&self, tol: f64) -> Vec<Vec2> {
-        let mut budget = MAX_TESSELLATED_POINTS;
-        self.tessellate_within(tol, &mut budget)
-    }
-    /// [`Polyline::tessellate`] spending about `budget` sampled points (shared by the caller
-    /// across many polylines). The budget is checked before each segment, so the last segment
-    /// started may overshoot it by that one segment's samples. Once it is spent, the remaining arcs are drawn as chords, so the
-    /// output stays proportional to the input vertices. Each arc can sample thousands of points,
-    /// so a compact polyline could otherwise expand into gigabytes (CWE-400).
-    pub fn tessellate_within(&self, tol: f64, budget: &mut usize) -> Vec<Vec2> {
         let mut out: Vec<Vec2> = Vec::new();
         for s in self.segments() {
             let mut pts = Vec::new();
-            if *budget > 0 {
-                s.tessellate(tol, &mut pts);
-                *budget = budget.saturating_sub(pts.len());
-            } else {
-                pts.extend([s.start(), s.end()]);
-            }
+            s.tessellate(tol, &mut pts);
             let skip = usize::from(out.last().is_some_and(|l| pts.first().is_some_and(|f| l.near(*f, 1e-9))));
             out.extend(pts.into_iter().skip(skip));
         }

crates/geom/src/lib.rs

@@ -20,8 +20,7 @@ mod vec;
 
 pub use bounds::Bounds2;
 pub use curve::{
-    Arc, Circle, Ellipse, Line, MAX_TESSELLATED_POINTS, PolyVertex, Polyline, Segment, arc_to_bulge, bulge_to_arc, point_in_polygon,
-    polygon_centroid, shoelace,
+    Arc, Circle, Ellipse, Line, PolyVertex, Polyline, Segment, arc_to_bulge, bulge_to_arc, point_in_polygon, polygon_centroid, shoelace,
 };
 pub use fillet::{CornerFit, TanCurve, tangent_circles};
 pub use intersect::{circle_circle, intersect_ext, intersect_segments, line_circle, line_line, line_line_infinite};

crates/geom/src/tests.rs

@@ -221,18 +221,6 @@ fn segment_offset() {
     assert!(s.offset(6.0).is_none());
 }
 
-/// A polyline of many fine arcs samples at most the point budget, then draws chords.
-#[test]
-fn polyline_tessellation_is_bounded() {
-    let vertices: Vec<PolyVertex> = (0..3000).map(|i| PolyVertex { bulge: 1.0, ..PolyVertex::new(Vec2::new(f64::from(i) * 1e6, 0.0)) }).collect();
-    let pl = Polyline { vertices, closed: false };
-    let pts = pl.tessellate(1e-9);
-    assert!(pts.len() <= MAX_TESSELLATED_POINTS + 2 * 3000 + 4096, "{}", pts.len());
-    assert!(pts.len() > 3000);
-    let mut budget = 10;
-    assert!(pl.tessellate_within(1e-9, &mut budget).len() <= 4096 + 2 * 3000);
-}
-
 #[test]
 fn arc_segments_bounded() {
     assert_eq!(arc_segments(0.0, 1.0, 0.1), 1);

crates/render/src/hatch.rs

@@ -128,10 +128,7 @@ const MAX_DEDUP_COMPARISONS: u64 = 50_000_000;
 /// within islands alternate), 1 outer keeps the outermost loops and their first islands, 2
 /// ignore keeps only the outermost loops. Nesting depth = how many other loops enclose a loop.
 pub fn fill_loops(h: &Hatch, tol: f64) -> Vec<Vec<Vec2>> {
-    // One point budget for all the loops: many short arcs across loops must not add up unbounded.
-    let mut budget = cadcraft_geom::MAX_TESSELLATED_POINTS;
-    let mut loops: Vec<Vec<Vec2>> =
-        h.loops.iter().map(|l| Polyline { vertices: l.vertices.clone(), closed: true }.tessellate_within(tol, &mut budget)).collect();
+    let mut loops: Vec<Vec<Vec2>> = h.loops.iter().map(|l| Polyline { vertices: l.vertices.clone(), closed: true }.tessellate(tol)).collect();
     dedup_polygons(&mut loops);
     let max_depth = match h.style {
         1 => 1,