Compare commits

..
Author SHA1 Message Date
skylar taylor-barrick 68fbf2a58d #618: test that OFFSET takes a clicked distance and picks its source under grid snap
OFFSET only accepted a typed distance, and with grid snap on a click meant to pick the source object was moved to the nearest grid point.

The engine test clicks two points for the distance and checks the second-point prompt and its base, the guide line in the preview, OFFSETDIST and the resulting offset. The canvas test does the same through grid-snapped clicks, then picks the source line and checks the side click puts the copy 5 units up, that OFFSET asks for the next object and that Enter ends it. Both live in the per-crate integration-test binary (#1989).

Without the fix the engine and canvas tests stay at the distance prompt; with only the cursor's point-prompt test reverted the canvas test never picks the line.
2026-11-15 05:59:54 +01:00
skylar taylor-barrick ee25f48c7b #651: test that small filled text is simplified on screen and keeps full detail in plots
Filled TrueType text was triangulated at full outline detail at every zoom, which froze the canvas on pages of small text.

The test draws four O glyphs in a font built in the test itself (a 128-point ring registered through `cadcraft_fonts::ttf::register`), so it needs no installed font and no font file in the repository, and it never skips. At 10 px per cap height the rings are simplified and the shapes keep their extent; with an em under two pixels each glyph is the ink's box, two triangles; a plot keeps every point. Without the fix the on-screen build has the plot's 1024 triangles.

`crates/render/src/text.rs` gains the same policy without any font: `detail` returns Full for a plot, Box for an em under two pixels and Reduced for a small one, and `simplify` drops the points of a flattened curve at a coarse band and keeps them at a fine one.
2026-11-15 05:59:54 +01:00
skylar taylor-barrick a6981415bf #1336: test that the DXF LAYER table stops at the record cap
The LAYER, LTYPE, STYLE and DIMSTYLE tables had no record cap, unlike VIEW, UCS and VPORT. The test reads a DXF with over a million LAYER records and checks the layer list stays at the cap; without the guard it holds every record (1000102 layers). The other three tables scan their lists linearly per record, so a million-record file is too slow to build in a test and they stay uncovered.
2026-11-15 05:53:20 +01:00
FredAppsandFredApps 67514021ae Release: CADCraft v0.21.0 on main (#3172)
Co-authored-by: FredApps <FredApps@users.noreply.github.com>
2026-11-14 21:45:54 +01:00
Zinadin Zidan 8e69890223 DXF: write a MINSERT with the AcDbMInsertBlock marker (#3127) (#3131)
An INSERT repeated in rows or columns (groups 70/71 above 1) was written with
the subclass marker AcDbBlockReference, the marker of a single block
reference. Readers that go by the marker, BricsCAD among them, then drew only
the first copy of the array. The writer now marks such a reference
AcDbMInsertBlock, as AutoCAD does, and a plain INSERT keeps
AcDbBlockReference. The reader does not look at the marker, so CADCraft reads
both back as before.
2026-11-14 15:22:22 +01:00
Dylan M. Taylor fbb083803b Merge pull request #3143 from storytold/codex/craft-dwg-cutover
Move CADCraft DWG bridge to craft-libs
2026-11-13 20:49:19 -05:00
FredAppsandFredApps fa7a97728b Naming: use Additional Tools for the utility menu (#2945)
* Naming: use Additional Tools for the utility menu

* test(naming): guard neutral display labels

* test(ui): handle escaped literals in feature-name guard

---------

Co-authored-by: FredApps <FredApps@users.noreply.github.com>
2026-11-14 01:18:12 +01:00
37 changed files with 735 additions and 22 deletions
Generated
+14 -14
View File
@@ -614,7 +614,7 @@ checksum = "fc652a48c352aef3ea3aed32080501cf3ef6ed5da78602a020c991775b0aff04"
[[package]]
name = "cadcraft"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-engine",
"cadcraft-io",
@@ -645,7 +645,7 @@ dependencies = [
[[package]]
name = "cadcraft-cli"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-engine",
"cadcraft-io",
@@ -661,14 +661,14 @@ dependencies = [
[[package]]
name = "cadcraft-color"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"serde",
]
[[package]]
name = "cadcraft-constraints"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-doc",
"cadcraft-geom",
@@ -678,7 +678,7 @@ dependencies = [
[[package]]
name = "cadcraft-doc"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-color",
"cadcraft-geom",
@@ -689,7 +689,7 @@ dependencies = [
[[package]]
name = "cadcraft-engine"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-color",
"cadcraft-constraints",
@@ -710,7 +710,7 @@ dependencies = [
[[package]]
name = "cadcraft-fonts"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-geom",
"craft-dxf",
@@ -723,14 +723,14 @@ dependencies = [
[[package]]
name = "cadcraft-geom"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"serde",
]
[[package]]
name = "cadcraft-io"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"acadrust",
"cadcraft-color",
@@ -752,7 +752,7 @@ dependencies = [
[[package]]
name = "cadcraft-mcp"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-engine",
"cadcraft-io",
@@ -767,7 +767,7 @@ dependencies = [
[[package]]
name = "cadcraft-render"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-color",
"cadcraft-doc",
@@ -781,7 +781,7 @@ dependencies = [
[[package]]
name = "cadcraft-ui-egui"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-color",
"cadcraft-doc",
@@ -809,7 +809,7 @@ dependencies = [
[[package]]
name = "cadcraft-web"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"cadcraft-engine",
"cadcraft-fonts",
@@ -5997,7 +5997,7 @@ checksum = "9440ea3e5aeabb0ac63af70daf835274065238cdd0cec83418f417eae38bacee"
[[package]]
name = "xtask"
version = "0.20.1"
version = "0.21.0"
dependencies = [
"chrono",
"serde_json",
+1 -1
View File
@@ -4,7 +4,7 @@ members = ["crates/*", "apps/*", "xtask"]
# default-members
[workspace.package]
version = "0.20.1"
version = "0.21.0"
edition = "2024"
license = "MIT OR Apache-2.0"
rust-version = "1.95"
+1 -1
View File
@@ -15,7 +15,7 @@ use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, St
pub(super) fn blockreplace_spec() -> CommandSpec {
CommandSpec::new("blockreplace", "Replace Block...", run_blockreplace)
.menu(&["Tools", "Express Tools", "Replace Block..."])
.menu(&["Tools", "Additional Tools", "Replace Block..."])
.alias(&["-blockreplace"])
.params("{block (the block whose references are replaced), with (the replacement block), purge?: bool (default false: remove the replaced block's definition when nothing references it any more)} → {block, with, replaced, purged}")
.interactive(|_| Ok(Box::new(BlockreplaceM::default())))
+1 -1
View File
@@ -12,7 +12,7 @@ use crate::{Result, Session};
pub(super) fn burst_spec() -> CommandSpec {
CommandSpec::new("burst", "Explode Attributes to Text", run_burst)
.menu(&["Tools", "Express Tools", "Explode Attributes to Text"])
.menu(&["Tools", "Additional Tools", "Explode Attributes to Text"])
.params("{handles?} (block references; other objects are left alone) → {handles}")
.interactive(|_| Ok(Box::new(SelectRun::new("burst", "BURST"))))
}
+1 -1
View File
@@ -20,7 +20,7 @@ use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, St
pub fn specs() -> Vec<CommandSpec> {
vec![
CommandSpec::new("breakline", "Break-line Symbol", run_breakline)
.menu(&["Tools", "Express Tools", "Break-line Symbol"])
.menu(&["Tools", "Additional Tools", "Break-line Symbol"])
.params(
"{p1, p2, at?: [x,y] (symbol location; default the midpoint), size? (default 1, times DIMSCALE), \
extension? (past both points; default 0), block? (a block with two points on Defpoints; default the built-in symbol)} → {handle}",
+1 -1
View File
@@ -65,7 +65,7 @@ pub fn specs() -> Vec<CommandSpec> {
.params("{handle (block reference), pick?: [x,y] (nearest nested object; default all), delta? | from,to}")
.interactive(|_| Ok(Box::new(NcopyM::default()))),
CommandSpec::new("mocoro", "Move/Copy/Rotate", mocoro::run_mocoro)
.menu(&["Tools", "Express Tools", "Move/Copy/Rotate"])
.menu(&["Tools", "Additional Tools", "Move/Copy/Rotate"])
.params("{handles?, base: [x,y], ops: [{move: [x,y]} | {copy: [x,y]} | {rotate: degrees} | {scale: factor} | {base: [x,y]}]} → {handles (copies)}")
.interactive(|_| Ok(Box::new(mocoro::MocoroM::default()))),
CommandSpec::new("chspace", "Change Space", run_chspace)
+1 -1
View File
@@ -18,7 +18,7 @@ use crate::{Accept, EngineError, Input, Interactive, Prompt, Result, Session, St
pub fn specs() -> Vec<CommandSpec> {
vec![
CommandSpec::new("txt2mtxt", "Convert Text to Mtext", run_txt2mtxt)
.menu(&["Tools", "Express Tools", "Convert Text to Mtext"])
.menu(&["Tools", "Additional Tools", "Convert Text to Mtext"])
.params(
"{handles? (default the selection; TEXT, and MTEXT when combining), combine? (default true: one MTEXT; false: one per TEXT), \
sort?: \"topdown\" (default) | \"selection\", wrap? (default false: one line per text)} → {handles}",
+10
View File
@@ -1551,3 +1551,13 @@ fn setvar_rejects_non_finite_text_for_real_variables() {
}
}
}
#[test]
fn additional_tools_keeps_compatible_command_ids() {
assert_eq!(crate::cmd::resolve_alias("-blockreplace"), "blockreplace");
for id in ["blockreplace", "burst", "breakline", "mocoro", "txt2mtxt"] {
let command = crate::cmd::find_command(id).expect("existing command id");
assert!(command.menu.contains(&"Additional Tools"), "{id}: {:?}", command.menu);
assert!(!command.menu.contains(&"Express Tools"));
}
}
+23
View File
@@ -1,7 +1,9 @@
//! OFFSET Erase/Layer/Multiple/Undo and the MOVE/COPY Displacement option at the command line.
use cadcraft_engine::Input;
use cadcraft_engine::Session;
use cadcraft_engine::doc::EntityKind;
use cadcraft_engine::geom::Vec2;
use serde_json::json;
/// Every line as ((ax, ay), (bx, by), layer), sorted by the first y.
@@ -62,6 +64,27 @@ fn offset_multiple_and_undo() {
assert_eq!(lines(&s), vec![l((0.0, 0.0), (10.0, 0.0), "0"), l((0.0, 2.0), (10.0, 2.0), "0"), l((0.0, 4.0), (10.0, 4.0), "0")]);
}
// Regression test for #618: OFFSET's distance prompt took only a typed number; clicking two points
// (the distance between them) was rejected, and the second click had no distance guide.
#[test]
fn offset_distance_from_two_clicked_points() {
let mut s = one_line();
s.start("offset").unwrap();
s.input(Input::Point(Vec2::new(20.0, 20.0))).unwrap();
let p = s.current_prompt().unwrap();
assert!(p.message.contains("second point"), "{}", s.prompt_text());
assert!(p.base.is_some_and(|b| b.near(Vec2::new(20.0, 20.0), 1e-9)), "the second click is measured from the first");
// The guide from the first click to the cursor is the previewed distance.
let guide = s.preview(Vec2::new(20.0, 22.5));
assert!(matches!(guide.first().map(|e| &e.kind), Some(EntityKind::Line(g)) if g.a.xy().near(Vec2::new(20.0, 20.0), 1e-9)), "{guide:?}");
s.input(Input::Point(Vec2::new(20.0, 22.5))).unwrap();
assert!(s.current_prompt().unwrap().message.contains("Select object"), "{}", s.prompt_text());
assert_eq!(s.doc().unwrap().header.f64("OFFSETDIST", -1.0), 2.5);
s.script("5,0 5,1\n\n").unwrap();
assert!(s.running.is_none(), "{}", s.prompt_text());
assert_eq!(lines(&s), vec![l((0.0, 0.0), (10.0, 0.0), "0"), l((0.0, 2.5), (10.0, 2.5), "0")]);
}
#[test]
fn offset_json_erase_and_layer() {
let mut s = one_line();
+5 -2
View File
@@ -344,7 +344,10 @@ fn write_text_entity(w: &mut W, d: &Drawing, e: &Entity, owner: &str, paper: boo
fn write_insert_entity(w: &mut W, d: &Drawing, e: &Entity, owner: &str, paper: bool, cx: &Ctx) {
if let EntityKind::Insert(i) = &e.kind {
w.s(0, "INSERT");
common(w, e, owner, paper, "AcDbBlockReference");
// A reference repeated in rows or columns (MINSERT, groups 70/71) is an AcDbMInsertBlock;
// readers that go by the marker draw only the first copy of an AcDbBlockReference.
let array = i.cols > 1 || i.rows > 1;
common(w, e, owner, paper, if array { "AcDbMInsertBlock" } else { "AcDbBlockReference" });
if !i.attribs.is_empty() {
w.i(66, 1);
}
@@ -354,7 +357,7 @@ fn write_insert_entity(w: &mut W, d: &Drawing, e: &Entity, owner: &str, paper: b
w.f(42, i.scale.y);
w.f(43, i.scale.z);
w.f(50, i.rotation.to_degrees());
if i.cols > 1 || i.rows > 1 {
if array {
w.i(70, i64::from(i.cols));
w.i(71, i64::from(i.rows));
w.f(44, i.col_spacing);
+16
View File
@@ -422,6 +422,22 @@ fn hostile_dxf_does_not_panic() {
}
}
// Regression test for #1336: the LAYER table of a DXF had no record cap, so a hostile file could
// grow the layer list without bound (its VIEW/UCS/VPORT peers stop at one million records).
#[test]
fn dxf_layer_table_stops_at_the_record_cap() {
use std::fmt::Write as _;
let records = 1_000_100;
let mut text = String::from("0\nSECTION\n2\nTABLES\n0\nTABLE\n2\nLAYER\n");
for i in 0..records {
let _ = write!(text, "0\nLAYER\n2\nL{i}\n");
}
text.push_str("0\nENDTAB\n0\nENDSEC\n0\nEOF\n");
let d = read(text.as_bytes(), "layers.dxf").unwrap();
assert!(d.layers.len() <= 1_000_000, "{} layers read from {records} records", d.layers.len());
assert!(d.layers.len() > 900_000, "the records below the cap are kept: {}", d.layers.len());
}
#[test]
fn svg_and_png_export() {
let d = sample();
+1
View File
@@ -37,6 +37,7 @@ mod layout_plot_window;
mod leader_vertex_elevation;
#[cfg(not(target_arch = "wasm32"))]
mod low_handseed;
mod minsert_marker;
mod mleader_content;
mod mleader_roundtrip;
mod mline_roundtrip;
+78
View File
@@ -0,0 +1,78 @@
//! A block reference repeated in rows or columns (MINSERT) is written with the subclass marker
//! `AcDbMInsertBlock`, as AutoCAD writes it; other readers (BricsCAD) draw only the first copy of
//! an array marked `AcDbBlockReference`. A plain INSERT keeps `AcDbBlockReference` (#3127).
use std::sync::Arc;
use cadcraft_doc::{Block, Common, Drawing, Entity, EntityKind, Insert, Line, Space};
use cadcraft_geom::Vec3;
fn drawing(refs: &[Insert]) -> Drawing {
let mut d = Drawing::new_metric();
let mut block = Block::new("MP");
block.entities.push(Entity::new(d.new_handle(), EntityKind::Line(Line { a: Vec3::ZERO, b: Vec3::new(2.5, 5.0, 0.0) })));
d.blocks.insert(block.name.clone(), Arc::new(block));
for r in refs {
d.add(&Space::Model, Common::default(), EntityKind::Insert(r.clone())).unwrap();
}
d
}
/// The subclass markers (group 100) of each INSERT record in the DXF text, in file order.
fn insert_markers(text: &str) -> Vec<Vec<String>> {
let lines: Vec<&str> = text.lines().map(str::trim).collect();
let pairs: Vec<(&str, &str)> = lines.chunks(2).filter_map(|c| Some((*c.first()?, *c.get(1)?))).collect();
let mut out = Vec::new();
let mut cur: Option<Vec<String>> = None;
for (code, value) in pairs {
if code == "0" {
out.extend(cur.take());
if value == "INSERT" {
cur = Some(Vec::new());
}
} else if code == "100"
&& let Some(m) = cur.as_mut()
{
m.push(value.to_string());
}
}
out.extend(cur);
out
}
fn inserts(d: &Drawing) -> Vec<Insert> {
d.model.iter().filter_map(|e| if let EntityKind::Insert(i) = &e.kind { Some(i.clone()) } else { None }).collect()
}
#[test]
fn minsert_is_written_with_the_minsert_marker() {
let columns = Insert { block: "MP".into(), cols: 6, col_spacing: 2.5, ..Insert::default() };
let rows = Insert { block: "MP".into(), insert: Vec3::new(0.0, 20.0, 0.0), rows: 3, row_spacing: 5.0, ..Insert::default() };
let text = cadcraft_io::write_dxf(&drawing(&[columns, rows]));
let markers = insert_markers(&text);
assert_eq!(markers.len(), 2, "{markers:?}");
for m in &markers {
assert_eq!(m, &["AcDbEntity", "AcDbMInsertBlock"], "an arrayed reference is an AcDbMInsertBlock");
}
}
#[test]
fn plain_insert_keeps_the_block_reference_marker() {
let plain = Insert { block: "MP".into(), insert: Vec3::new(30.0, 0.0, 0.0), ..Insert::default() };
let text = cadcraft_io::write_dxf(&drawing(&[plain]));
assert_eq!(insert_markers(&text), [["AcDbEntity", "AcDbBlockReference"]]);
}
#[test]
fn minsert_array_reads_back_from_its_own_dxf() {
let refs = [
Insert { block: "MP".into(), cols: 6, col_spacing: 2.5, ..Insert::default() },
Insert { block: "MP".into(), insert: Vec3::new(0.0, 20.0, 0.0), cols: 2, rows: 3, col_spacing: 4.0, row_spacing: 5.0, ..Insert::default() },
Insert { block: "MP".into(), insert: Vec3::new(30.0, 0.0, 0.0), ..Insert::default() },
];
let text = cadcraft_io::write_dxf(&drawing(&refs));
let back = inserts(&cadcraft_io::read_dxf(text.as_bytes()).unwrap());
let got: Vec<_> = back.iter().map(|i| (i.block.as_str(), i.insert, i.cols, i.rows, i.col_spacing, i.row_spacing)).collect();
let want: Vec<_> = refs.iter().map(|i| (i.block.as_str(), i.insert, i.cols, i.rows, i.col_spacing, i.row_spacing)).collect();
assert_eq!(got, want);
}
+182
View File
@@ -277,6 +277,163 @@ fn system_font() -> Option<&'static str> {
["Arial", "Helvetica", "DejaVuSans", "Verdana", "LiberationSans-Regular"].into_iter().find(|n| cadcraft_fonts::ttf::find(n).is_some())
}
// ---------- a fixture TrueType font, made here: no font file, no installed font ----------
fn be16(v: &mut Vec<u8>, x: u16) {
v.extend_from_slice(&x.to_be_bytes());
}
fn be32(v: &mut Vec<u8>, x: u32) {
v.extend_from_slice(&x.to_be_bytes());
}
/// One simple glyph: closed contours of on-curve points, with the box the file records for it.
fn simple_glyph(contours: &[Vec<(i16, i16)>]) -> Vec<u8> {
let points: Vec<(i16, i16)> = contours.iter().flatten().copied().collect();
let mut g = Vec::new();
be16(&mut g, contours.len() as u16);
let box_ = points.iter().fold((i16::MAX, i16::MAX, i16::MIN, i16::MIN), |b, p| (b.0.min(p.0), b.1.min(p.1), b.2.max(p.0), b.3.max(p.1)));
for v in [box_.0, box_.1, box_.2, box_.3] {
be16(&mut g, v as u16);
}
let mut end = 0u16;
for c in contours {
end = end.saturating_add(c.len() as u16);
be16(&mut g, end.saturating_sub(1));
}
be16(&mut g, 0);
g.extend(std::iter::repeat_n(1u8, points.len()));
let (mut px, mut py) = (0i16, 0i16);
for (x, _) in &points {
be16(&mut g, x.wrapping_sub(px) as u16);
px = *x;
}
for (_, y) in &points {
be16(&mut g, y.wrapping_sub(py) as u16);
py = *y;
}
while g.len() % 4 != 0 {
g.push(0);
}
g
}
/// A closed ellipse round (500, 350), wound by `clockwise`: one contour of a glyph outline.
fn ring(rx: f64, ry: f64, points: usize, clockwise: bool) -> Vec<(i16, i16)> {
let dir = if clockwise { -1.0 } else { 1.0 };
(0..points)
.map(|i| {
(
(500.0 + rx * (dir * std::f64::consts::TAU * i as f64 / points as f64).cos()) as i16,
(350.0 + ry * (dir * std::f64::consts::TAU * i as f64 / points as f64).sin()) as i16,
)
})
.collect()
}
/// A TrueType font whose only glyph, "O", is a 128-point ring: the flattened outline a real font's
/// curve gives, at the same scale, with plenty of detail to simplify. It is built in code so the
/// level-of-detail test needs no installed font and no font file in the repository (#651).
fn fixture_font() -> &'static str {
const NAME: &str = "cadcraft-render-lod.ttf";
static ONCE: std::sync::Once = std::sync::Once::new();
ONCE.call_once(|| cadcraft_fonts::ttf::register(NAME, fixture_font_bytes()));
NAME
}
fn fixture_font_bytes() -> Vec<u8> {
let mut glyf = Vec::new();
let mut loca = Vec::new();
be32(&mut loca, 0); // .notdef: no contours
be32(&mut loca, 0);
glyf.extend_from_slice(&simple_glyph(&[ring(500.0, 350.0, 128, false), ring(250.0, 150.0, 128, true)]));
be32(&mut loca, glyf.len() as u32);
let mut head = Vec::new();
be32(&mut head, 0x0001_0000);
be32(&mut head, 0x0001_0000);
be32(&mut head, 0);
be32(&mut head, 0x5F0F_3CF5);
be16(&mut head, 0);
be16(&mut head, 1000);
head.extend_from_slice(&[0; 16]);
for v in [0i16, 0, 1000, 700] {
be16(&mut head, v as u16);
}
for v in [0u16, 8, 2, 1, 0] {
be16(&mut head, v);
}
let mut hhea = Vec::new();
be32(&mut hhea, 0x0001_0000);
for v in [800i16, -200, 0, 1000, 0, 0, 1000, 1, 0, 0, 0, 0, 0, 0, 0] {
be16(&mut hhea, v as u16);
}
be16(&mut hhea, 2);
let mut maxp = Vec::new();
be32(&mut maxp, 0x0001_0000);
for v in [2u16, 256, 2, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0] {
be16(&mut maxp, v);
}
let mut hmtx = Vec::new();
for _ in 0..2 {
be16(&mut hmtx, 1000);
be16(&mut hmtx, 0);
}
// cmap: format 4, 'O' → glyph 1.
let mut sub = Vec::new();
let segs: [(u16, u16, u16); 2] = [(0x4F, 0x4F, 1u16.wrapping_sub(0x4F)), (0xFFFF, 0xFFFF, 1)];
be16(&mut sub, 4);
be16(&mut sub, (16 + segs.len() * 8) as u16);
be16(&mut sub, 0);
be16(&mut sub, (segs.len() * 2) as u16);
for v in [4u16, 1, 0] {
be16(&mut sub, v);
}
for s in segs {
be16(&mut sub, s.1);
}
be16(&mut sub, 0);
for s in segs {
be16(&mut sub, s.0);
}
for s in segs {
be16(&mut sub, s.2);
}
for _ in segs {
be16(&mut sub, 0);
}
let mut cmap = Vec::new();
for v in [0u16, 1, 3, 1] {
be16(&mut cmap, v);
}
be32(&mut cmap, 12);
cmap.extend_from_slice(&sub);
let mut os2 = vec![0u8; 78];
os2[8..10].copy_from_slice(&0u16.to_be_bytes());
let mut tables: Vec<(&[u8; 4], Vec<u8>)> =
vec![(b"OS/2", os2), (b"cmap", cmap), (b"glyf", glyf), (b"head", head), (b"hhea", hhea), (b"hmtx", hmtx), (b"loca", loca), (b"maxp", maxp)];
tables.sort_by_key(|t| *t.0);
let mut out = Vec::new();
be32(&mut out, 0x0001_0000);
for v in [tables.len() as u16, 128, 3, tables.len() as u16 * 16 - 128] {
be16(&mut out, v);
}
let mut off = 12 + 16 * tables.len();
for (t, d) in &tables {
out.extend_from_slice(*t);
be32(&mut out, 0);
be32(&mut out, off as u32);
be32(&mut out, d.len() as u32);
off += d.len().div_ceil(4) * 4;
}
for (_, d) in &tables {
out.extend_from_slice(d);
while out.len() % 4 != 0 {
out.push(0);
}
}
out
}
#[test]
fn truetype_text_is_filled_or_outlined() {
let Some(font) = system_font() else { return };
@@ -298,6 +455,31 @@ fn truetype_text_is_filled_or_outlined() {
assert!(l.prims.len() >= 3, "O has two contours, H one");
}
// Regression test for #651: filled TrueType text was triangulated at full outline detail at every
// zoom, so a page of small text on screen produced millions of triangles and froze the canvas.
#[test]
fn small_filled_text_on_screen_is_simplified_but_plots_keep_full_detail() {
let d = text_doc(fixture_font(), "OOOO");
let tris = |l: &DisplayList| l.prims.iter().filter(|p| p.kind == Kind::Tris).map(|p| l.points(p).len() / 3).sum::<usize>();
let plot = build_plot(&d, &Space::Model, &Options::default());
let full = tris(&plot);
assert!(full > 100, "a plot keeps every point of the 128-point rings: {full} triangles");
// One pixel is a tenth of the cap height: the rings are simplified to a few points, the shapes
// stay.
let reduced = build(&d, &Space::Model, &screen(0.1, None));
assert!(tris(&reduced) < full / 2, "{} triangles at 10 px per cap height, {full} in a plot", tris(&reduced));
assert!(tris(&reduced) > 0 && reduced.bounds.width() > plot.bounds.width() * 0.9, "{:?} vs {:?}", reduced.bounds, plot.bounds);
// An em under two pixels is drawn as the ink's box: two triangles a glyph, same extent.
let tiny = build(&d, &Space::Model, &screen(2.0, None));
assert_eq!(tris(&tiny), 2 * 4, "one box per glyph");
assert!(
tiny.bounds.width() > plot.bounds.width() * 0.9 && tiny.bounds.height() > plot.bounds.height() * 0.9,
"{:?} vs {:?}",
tiny.bounds,
plot.bounds
);
}
#[test]
fn missing_font_falls_back_to_stroke() {
let d = text_doc("NoSuchFontAnywhere.ttf", "OH");
+28
View File
@@ -256,6 +256,34 @@ mod tests {
assert!(tris.iter().all(|p| (5.0e5..=5.0e5 + 2.0).contains(&p.x) && (-3.0e5..=-3.0e5 + 2.0).contains(&p.y)));
}
// Regression test for #651: the level of detail followed the pixel size, so a page of small
// filled text on screen kept a few points a glyph while a plot kept all of them.
#[test]
fn a_small_on_screen_pixel_simplifies_glyphs_and_a_plot_does_not() {
// Text of height 1 has a 700-unit cap height: one font unit is 1/700 of a drawing unit.
let xf = Mat3 { a: 1.0 / 700.0, b: 0.0, c: 0.0, d: 1.0 / 700.0, e: 0.0, f: 0.0 };
assert!(matches!(detail(xf, 0.0), Detail::Full), "a plot keeps every point");
assert!(matches!(detail(xf, 2.0), Detail::Box), "an em under two pixels is the ink's box");
assert!(matches!(detail(xf, 0.1), Detail::Reduced(band) if band >= 2), "10 px per cap height simplifies");
assert!(matches!(detail(xf, f64::NAN), Detail::Full), "a pixel size that is not a size keeps full detail");
}
#[test]
fn a_coarse_band_drops_the_points_of_a_flattened_curve() {
// A ring of 64 points, the outline a flattened curve gives.
let ring: Vec<Vec2> = (0..64u32)
.map(|i| {
let t = std::f64::consts::TAU * f64::from(i) / 64.0;
Vec2::new(500.0 * t.cos(), 350.0 * t.sin())
})
.collect();
let coarse = simplify(&ring, 8.0);
assert!(coarse.len() < ring.len() / 2, "{} of {} points kept at 8 font units", coarse.len(), ring.len());
assert!(coarse.len() >= 4, "a ring never collapses to a line: {}", coarse.len());
let fine = simplify(&ring, 0.01);
assert!(fine.len() >= ring.len(), "a fine band keeps every point: {} of {}", fine.len(), ring.len());
}
#[test]
fn hostile_placed_outline_never_panics() {
assert!(triangulate_placed(&[]).is_empty());
+3
View File
@@ -1383,3 +1383,6 @@ menu View عرض
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. تغيّر الرسم. أغلق النافذة وافتحها مرة أخرى.
# ArtCraft feature naming
Additional Tools أدوات إضافية
Can't render this file because it contains an unexpected character in line 1335 and column 24.
+3
View File
@@ -1459,3 +1459,6 @@ menu Modify Izmijeni
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Crtež se promijenio. Zatvorite prozor i otvorite ga ponovo.
# ArtCraft feature naming
Additional Tools Dodatni alati
Can't render this file because it contains an unexpected character in line 1444 and column 24.
+3
View File
@@ -1239,3 +1239,6 @@ menu Modify Modifikace
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Výkres se změnil. Zavřete okno a otevřete jej znovu.
# ArtCraft feature naming
Additional Tools Další nástroje
1 # CADCraft Czech interface catalog — original translations by @Losminek (AI-assisted).
1239
1240
1241
1242 # ArtCraft feature naming
1243
1244
+3
View File
@@ -1056,3 +1056,6 @@
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Die Zeichnung hat sich geändert. Schließen Sie das Fenster und öffnen Sie es erneut.
# ArtCraft feature naming
Additional Tools Zusätzliche Werkzeuge
1 # CADCraft German interface catalog — original translations by the CADCraft contributors.
1056
1057
1058
1059 # ArtCraft feature naming
1060
1061
+3
View File
@@ -1350,3 +1350,6 @@ menu View Προβολή
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Το σχέδιο άλλαξε. Κλείστε το παράθυρο και ανοίξτε το ξανά.
# ArtCraft feature naming
Additional Tools Πρόσθετα εργαλεία
1 # Greek interface catalog for CADCraft. Original, AI-assisted translation by @Camthalion77 with ChatGPT.
1350
1351
1352
1353 # ArtCraft feature naming
1354
1355
+3
View File
@@ -1270,3 +1270,6 @@
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. El dibujo cambió. Cierre la ventana y ábrala de nuevo.
# ArtCraft feature naming
Additional Tools Herramientas adicionales
1 # CADCraft Spanish interface catalog — original translations.
1270
1271
1272
1273 # ArtCraft feature naming
1274
1275
+3
View File
@@ -1036,3 +1036,6 @@
Press the keys Appuyez sur les touches
Back to CADCraft's shortcut Revenir au raccourci de CADCraft
A shortcut you give wins over CADCraft's own. Changes apply at once and are kept for next time. Un raccourci que vous définissez l'emporte sur celui de CADCraft. Les modifications s'appliquent tout de suite et sont conservées.
# ArtCraft feature naming
Additional Tools Outils supplémentaires
1 # CADCraft French interface catalog — original translations by @pechnikov2026-star.
1036
1037
1038
1039 # ArtCraft feature naming
1040
1041
+3
View File
@@ -1361,3 +1361,6 @@ menu View Nézet
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. A rajz megváltozott. Zárja be az ablakot, és nyissa meg újra.
# ArtCraft feature naming
Additional Tools További eszközök
Can't render this file because it contains an unexpected character in line 16 and column 72.
+3
View File
@@ -1398,3 +1398,6 @@ menu Modify Edita
ENTER INVIO
Shortcut Menu: always enabled Menu di scelta rapida: sempre attivo
Shortcut Menu: enabled when command options are present Menu di scelta rapida: attivo se il comando ha opzioni
# ArtCraft feature naming
Additional Tools Strumenti aggiuntivi
1 # CADCraft Italian interface catalog — original translations by Emanuele Bottelli (AI-assisted, Claude).
1398
1399
1400
1401 # ArtCraft feature naming
1402
1403
+3
View File
@@ -1472,3 +1472,6 @@ menu View ხედი
Text to find მოსაძებნი ტექსტი
Whole words მთლიანი სიტყვები
Nothing found ვერაფერი მოიძებნა
# ArtCraft feature naming
Additional Tools დამატებითი ხელსაწყოები
Can't render this file because it contains an unexpected character in line 10 and column 14.
+3
View File
@@ -1259,3 +1259,6 @@ menu Modify 수정
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. 도면이 변경되었습니다. 창을 닫고 다시 여십시오.
# ArtCraft feature naming
Additional Tools 추가 도구
1 # CADCraft Korean interface catalog — original Korean translations.
1259
1260
1261
1262 # ArtCraft feature naming
1263
1264
+3
View File
@@ -1465,3 +1465,6 @@ menu View Exibir
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. O desenho mudou. Feche a janela e abra-a novamente.
# ArtCraft feature naming
Additional Tools Ferramentas adicionais
Can't render this file because it contains an unexpected character in line 1413 and column 24.
+3
View File
@@ -1030,3 +1030,6 @@
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Чертёж изменился. Закройте окно и откройте его снова.
# ArtCraft feature naming
Additional Tools Дополнительные инструменты
1 # CADCraft Russian interface catalog — original translations by @pechnikov2026-star.
1030
1031
1032
1033 # ArtCraft feature naming
1034
1035
+3
View File
@@ -1483,3 +1483,6 @@ menu Modify Ändra
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Ritningen har ändrats. Stäng fönstret och öppna det igen.
# ArtCraft feature naming
Additional Tools Ytterligare verktyg
Can't render this file because it contains an unexpected character in line 1472 and column 24.
+3
View File
@@ -1364,3 +1364,6 @@ menu View Görünüm
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Çizim değişti. Pencereyi kapatıp yeniden açın.
# ArtCraft feature naming
Additional Tools Ek Araçlar
Can't render this file because it contains an unexpected character in line 11 and column 13.
+3
View File
@@ -1422,3 +1422,6 @@
ENTER Клавіша Enter
Shortcut Menu: always enabled Контекстне меню: завжди
Shortcut Menu: enabled when command options are present Контекстне меню: коли команда має параметри
# ArtCraft feature naming
Additional Tools Додаткові інструменти
Can't render this file because it contains an unexpected character in line 1385 and column 24.
+3
View File
@@ -1464,3 +1464,6 @@ menu Modify Hiệu chỉnh
Ctrl+Enter to apply Ctrl+Enter to apply
Edit Text Edit Text
The drawing changed. Close the window and open it again. Bản vẽ đã thay đổi. Đóng cửa sổ và mở lại.
# ArtCraft feature naming
Additional Tools Công cụ bổ sung
Can't render this file because it contains an unexpected character in line 1444 and column 24.
+3
View File
@@ -1476,3 +1476,6 @@ menu View 视图
Ctrl+Enter to apply Ctrl+Enter 应用
Edit Text 编辑文字
The drawing changed. Close the window and open it again. 图纸已切换。请关闭窗口后重新打开。
# ArtCraft feature naming
Additional Tools 其他工具
Can't render this file because it contains an unexpected character in line 1439 and column 24.
+215
View File
@@ -0,0 +1,215 @@
//! Guard the production display surfaces without banning compatibility identifiers or notices.
use std::path::{Path, PathBuf};
const BANNED: &[&str] = &["Express Tools"];
const ALLOWED: &[&str] = &[];
const ROOTS: &[&str] = &["src", "../engine/src/cmd"];
fn is_word(c: char) -> bool {
c.is_alphanumeric() || c == '_'
}
fn banned_display(text: &str) -> bool {
if ALLOWED.contains(&text) {
return false;
}
BANNED.iter().any(|banned| {
text.match_indices(banned)
.any(|(at, _)| !text[..at].chars().next_back().is_some_and(is_word) && !text[at + banned.len()..].chars().next().is_some_and(is_word))
})
}
// Read ordinary and raw Rust string literals, ignoring comments. No compiler dependency is
// needed, so this guard can also run by itself when a full application build is unavailable.
#[allow(clippy::cognitive_complexity)] // This small test-only lexer keeps raw-string/comment state together.
fn literals(source: &str) -> Vec<String> {
let chars: Vec<char> = source.chars().collect();
let mut out = Vec::new();
let mut at = 0;
let mut test_module = false;
let mut test_depth = 0_usize;
while at < chars.len() {
if chars.get(at..at + 12) == Some(&['#', '[', 'c', 'f', 'g', '(', 't', 'e', 's', 't', ')', ']']) {
at += 12;
let rest: String = chars[at..].iter().collect();
if rest.trim_start().starts_with("mod ") {
test_module = true;
}
} else if chars.get(at..at + 2) == Some(&['/', '/']) {
while at < chars.len() && chars[at] != '\n' {
at += 1;
}
} else if chars.get(at..at + 2) == Some(&['/', '*']) {
at += 2;
let mut depth = 1;
while at < chars.len() && depth > 0 {
if chars.get(at..at + 2) == Some(&['/', '*']) {
depth += 1;
at += 2;
} else if chars.get(at..at + 2) == Some(&['*', '/']) {
depth -= 1;
at += 2;
} else {
at += 1;
}
}
} else if chars[at] == 'r' && matches!(chars.get(at + 1), Some('"' | '#')) {
let start = at;
at += 1;
while chars.get(at) == Some(&'#') {
at += 1;
}
let hashes = at - start - 1;
if chars.get(at) != Some(&'"') {
continue;
}
at += 1;
let begin = at;
while at < chars.len() {
if chars[at] == '"' && (1..=hashes).all(|n| chars.get(at + n) == Some(&'#')) {
break;
}
at += 1;
}
if !test_module {
out.push(chars[begin..at].iter().collect());
}
at += 1 + hashes;
} else if chars[at] == '"' {
at += 1;
let mut text = String::new();
while at < chars.len() {
let c = chars[at];
at += 1;
if c == '"' {
break;
}
if c == '\\' && at < chars.len() {
let escaped = chars[at];
at += 1;
match escaped {
'n' => text.push('\n'),
't' => text.push('\t'),
'r' => text.push('\r'),
'0' => text.push('\0'),
'\n' | '\r' => {
while chars.get(at).is_some_and(|c| c.is_whitespace()) {
at += 1;
}
}
other => text.push(other),
}
} else {
text.push(c);
}
}
if !test_module {
out.push(text);
}
} else if chars[at] == '\'' && chars.get(at + 1) == Some(&'\\') {
// Skip the escape and its payload, including hexadecimal/Unicode escapes.
at += 3;
while at < chars.len() && chars[at] != '\'' {
at += 1;
}
at += 1;
} else if chars[at] == '\'' && chars.get(at + 2) == Some(&'\'') {
at += 3; // A character literal such as '"', not the start of a string.
} else {
if test_module {
match chars[at] {
'{' => test_depth += 1,
'}' => {
test_depth = test_depth.saturating_sub(1);
if test_depth == 0 {
test_module = false;
}
}
';' if test_depth == 0 => test_module = false,
_ => {}
}
}
at += 1;
}
}
out
}
fn check_tree(path: &Path, failures: &mut Vec<String>) {
if path.is_dir() {
for entry in std::fs::read_dir(path).expect("source directory") {
let path = entry.expect("source entry").path();
if path.file_name().is_some_and(|name| name == "tests") {
continue;
}
check_tree(&path, failures);
}
} else if path.extension().is_some_and(|ext| ext == "rs") {
let name = path.file_name().expect("source filename").to_string_lossy();
if name == "tests.rs" || name.ends_with("_tests.rs") {
return;
}
let source = std::fs::read_to_string(path).expect("UTF-8 Rust source");
// Skip only inline test modules, not later production following test-only imports.
for text in literals(&source) {
if banned_display(&text) {
failures.push(format!("{}: {text:?}", path.display()));
}
}
}
}
#[test]
fn production_display_names_stay_neutral() {
let base = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
let mut failures = Vec::new();
for root in ROOTS {
let root = base.join(root);
assert!(root.exists(), "missing display source: {}", root.display());
check_tree(&root, &mut failures);
}
assert!(failures.is_empty(), "Banned display names:\n{}", failures.join("\n"));
}
#[test]
fn guard_distinguishes_labels_from_identifiers_and_comments() {
for name in BANNED {
assert!(banned_display(name), "{name}");
}
for name in ALLOWED {
assert!(!banned_display(name), "{name}");
}
assert!(!banned_display("filter.cameraRaw"));
assert!(!banned_display("tool.guidedUpright"));
assert!(!banned_display("insert.smartArt"));
assert_eq!(literals("// \"ignored\"\n/* \"ignored\" */ \"label\""), ["label"]);
assert_eq!(literals("r#\"raw label\"#"), ["raw label"]);
}
#[test]
fn guard_scans_production_after_test_only_items() {
let source = r###"#[cfg(test)] mod tests { let _ = "ignored"; }
#[cfg(test)] use fixtures::Helper;
fn production() { let _ = r#"live label"#; }
"###;
assert_eq!(literals(source), ["live label"]);
assert_eq!(literals("#[cfg(test)] mod tests; fn live() { let _ = \"live label\"; }"), ["live label"]);
}
#[test]
fn guard_skips_escaped_character_literals() {
assert_eq!(literals(r#"let q = '\"'; "label""#), ["label"]);
assert_eq!(literals(r#"let q = '\''; "label""#), ["label"]);
assert_eq!(literals(r#"let q = '\\'; "label""#), ["label"]);
assert_eq!(literals(r#"let q = '\u{22}'; "label""#), ["label"]);
}
#[test]
fn guard_decodes_whitespace_escapes() {
assert_eq!(literals(r#""one\ntwo\tthree\rfour\0""#), ["one\ntwo\tthree\rfour\0"]);
assert_eq!(literals("\"joined\\\n label\""), ["joinedlabel"]);
for name in BANNED {
let source = format!("\"\\t{name}\\n\"");
assert!(literals(&source).iter().any(|label| banned_display(label)));
}
}
+1
View File
@@ -22,6 +22,7 @@ mod mspace_viewport_view;
mod named_viewports_dialog;
mod native_menu_text_keys;
mod native_windows;
mod offset_clicks;
mod options_dialog;
mod options_right_click;
mod parameters_rename;
+83
View File
@@ -0,0 +1,83 @@
//! OFFSET on the canvas: the distance can be clicked, and picking the source is not moved by the
//! grid snap (#618).
use cadcraft_engine::Session;
use cadcraft_engine::doc::{Common, Drawing, EntityKind, Line, Space};
use cadcraft_engine::geom::Vec2;
use cadcraft_ui_egui::{CadApp, Services};
use egui::{Event, Modifiers, PointerButton, Pos2, vec2};
use egui_kittest::Harness;
use serde_json::json;
fn harness() -> Harness<'static, CadApp> {
let mut d = Drawing::new_imperial();
d.add(&Space::Model, Common::default(), EntityKind::Line(Line { a: Vec2::new(0.0, 2.0).to3(0.0), b: Vec2::new(10.0, 2.0).to3(0.0) })).unwrap();
let mut session = Session::empty();
session.open_drawing(d, "Offset clicks", None);
session.execute("view.set", &json!({"center":[5,5],"height":20})).unwrap();
session.settings.osmode = 0;
session.settings.snapmode = true;
session.execute("setvar", &json!({"name":"SNAPUNIT","value":[5,5]})).unwrap();
session.settings.orthomode = false;
let mut app = CadApp::new(session, Services::default());
app.canvas.zoom_pending = false;
let mut h = Harness::builder().with_size(vec2(1600.0, 1000.0)).build_ui_state(
|ui, app: &mut CadApp| {
app.logic(ui.ctx());
app.ui(ui);
},
app,
);
h.run_steps(5);
h
}
fn click(h: &mut Harness<'_, CadApp>, world: Vec2) {
let pos: Pos2 = h.state().canvas.xf.unwrap().to_screen(world);
h.event(Event::PointerMoved(pos));
h.run_steps(2);
for pressed in [true, false] {
h.event(Event::PointerButton { pos, button: PointerButton::Primary, pressed, modifiers: Modifiers::NONE });
h.run_steps(2);
}
}
// Regression test for #618: OFFSET's distance could not be clicked, and with grid snap on a click
// meant to pick the source object was moved to the nearest grid point, missing the object.
#[test]
fn offset_takes_a_clicked_distance_and_picks_its_source_under_grid_snap() {
let mut h = harness();
h.state_mut().start("offset");
h.run_steps(2);
// Two clicks, snapped to the grid points (5, 5) and (10, 5): a distance of 5.
click(&mut h, Vec2::new(5.1, 4.9));
assert!(h.state().session.prompt_text().contains("second point"), "{}", h.state().session.prompt_text());
click(&mut h, Vec2::new(9.9, 5.1));
assert_eq!(h.state().session.doc().unwrap().header.f64("OFFSETDIST", -1.0), 5.0);
assert!(h.state().session.prompt_text().contains("Select object"), "{}", h.state().session.prompt_text());
// The source line is at y = 2, two units from the grid point (5, 0) the click would snap to.
click(&mut h, Vec2::new(7.0, 2.04));
let prompt = h.state().session.prompt_text();
assert!(prompt.contains("side to offset"), "the line was not picked: {prompt}");
// A side click above the line (snapped to (5, 5)) makes the copy 5 units up, at y = 7.
click(&mut h, Vec2::new(7.0, 7.0));
let lines: Vec<(f64, f64)> = h
.state()
.session
.doc()
.unwrap()
.model
.iter()
.filter_map(|e| match &e.kind {
EntityKind::Line(line) => Some((line.a.y, line.b.y)),
_ => None,
})
.collect();
assert_eq!(lines.len(), 2, "OFFSET added no line: {lines:?}");
assert!(lines.iter().any(|&(a, b)| (a - 7.0).abs() < 1e-9 && (b - 7.0).abs() < 1e-9), "no copy at y = 7: {lines:?}");
// OFFSET asks for the next object; Enter ends it.
assert!(h.state().session.prompt_text().contains("Select object to offset"), "{}", h.state().session.prompt_text());
h.key_press(egui::Key::Enter);
h.run_steps(2);
assert_eq!(h.state().session.prompt_text(), "Command:", "Enter ends OFFSET");
}
+19
View File
@@ -0,0 +1,19 @@
# Feature naming
ArtCraft apps use descriptive names for their own features. Product names used to describe compatibility, file formats, attribution or external software remain accurate.
## Naming map
Express Tools → Additional Tools. This is a descriptive naming cleanup, not a determination that the old phrase is a registered trademark.
## Compatibility boundary
Command IDs, aliases, prompts, drawing data, DXF/DWG identifiers and interoperability references are unchanged. No assets, attribution, dependencies or rendering behavior change.
## Localization and verification
Each shipped non-English interface catalog includes the new labels. Regression tests cover the labels and stable command identities.
## Regression coverage
The standard-library-only `display_names` integration tests scan production Rust string literals for the retired display names and preserve explicit compatibility exceptions. They also test identifier, comment and raw-string handling. These focused checks do not replace application or visual testing.