4 Commits

Include renames

Author	SHA1	Message	Date
3 people	fee9b984eb	Tables: text running past an exact-height row is cut off (#1617) ... * Tables: text running past an exact-height row is cut off A row with an exact height (w:trHeight w:hRule="exact") keeps that height whatever its cells hold. Word cuts the text that doesn't fit at the cell's edge; WordCraft drew it over the rows below, so a certificate's identification block came out as overlapping lines. The cell is marked as clipped in layout (Placed::Cell clip), and display draws its lines inside that cell's clip, on screen and in PDF. Hit testing is unchanged: the lines stay where they are in the layout. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: keep row clipping compatible with Rust 1.90 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 20:15:39 -04:00
3 people	987c41364d	Tables: AutoFit in a nested table, whole cells shaded for a selection through a table, Shift+Right at a cell's end (#1004) ... * Tables: AutoFit in a nested table fits within its cell (#971) A double-click on a nested table's column border let the table widen up to the page's right margin, far past the cell around it. It now widens only up to the right edge of that cell's text (a right-to-left table's start margin on the right); the columns right of the border still keep their widths. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: a selection through a table shades its rows' whole cells (#971) A selection from text into or across a table takes whole rows (#722), but only the letters in the cells were highlighted. Every row it takes from start to end now shades all its cells (an empty one too), as selected cells do, and the letters in them aren't shaded twice (`table_mouse::selection_rects`, used by the canvas). A selection that starts and ends in one table keeps its text highlight, so selecting all the text of a cell doesn't look like selecting the cell; a nested table in a shaded row shades with it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Typing: Shift+Right at a cell's end selects the cell first (#971) Shift+Right out of the cell the selection is in selected that cell and the next one at once. As in Word, the first step out of the cell now takes the cell alone (its end-of-cell mark) and the next press goes on into the next cell; in an empty cell the first press selects it. Shift+Left in right-to-left text, the forward step there, does the same. Pinned in `tests_typing.rs` and `docs/typing-parity.md`; progress docs for all three table fixes of #971. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-14 15:08:57 -04:00
4 people	f24a5b22b2	Tables: drags and Shift+arrows over cells select whole cells (#722) ... * Tables: select, insert and move with the mouse; double-click a border to AutoFit Like Word, on top of the border resizing: - Selection areas: just above a column the pointer becomes a down arrow, left of a row the row arrow, along a cell's left edge (inside it) the cell arrow. A click selects the column, row or cell; a drag selects every one up to the pointer. Selected cells are shaded as cells, empty ones too. - Insert buttons: left of a row border and above a column border a "+" shows with the border marked; a click adds a row or column there and puts the caret in it. - Move handle past the table's top-left corner: a click selects the table; a drag shows a dashed outline and, on release, the table floats where it is dropped with the text wrapping around it (Word's behaviour). One undo step. Nested tables and tables outside the main text are only selected. - A double-click on a column border fits the column left of it to its contents (the right neighbour gives or takes the room; on the right edge the table's width changes, up to the right margin). - Table Layout > Select > Select Column (catalog 418/449). Whole-cell selection: a column (or a rectangle of cells over several rows) is not one run of the text, so selecting it makes a block of its cells' paragraphs (`CellRange` on the existing `ColumnBlock`). Bold, alignment, Delete, typing, copy and numbering act on those cells only (a numbered column is one list); table commands (shading, merge, delete columns) take the rectangle; Tab moves on without clearing it; Undo brings the selection back. Cells of one row, or whole rows, stay an ordinary stream selection. The format painter no longer clears a block's text (edit.pasteFormat was handled like a paste). The mini toolbar stays hidden over whole-cell selections and during these drags: pinned above the selection it covered the column areas, the "+" buttons and the move handle. Engine: crates/engine/src/cmd/table_mouse.rs - table.selectAt, table.insertAt, table.moveDrag, table.fitColumn (page coordinates, so agents and the control channel can do the same) and table.selectColumn; hit testing reuses table_resize's drawn geometry, and borders keep priority for resizing. 10 engine tests (areas, a column edited cell by cell, numbering, rows/cells/drags, insert buttons, move, fit, format painter, hostile params). UI: crates/ui-egui/src/table_mouse.rs, wired into the existing canvas mouse handler (no extra ui.interact areas, so clicks in a cell's text still place the caret); kittest tests with real pointer events: column click, row drag, "+" button, move-handle drag in one undo step, double-click fit. New labels translated in all eleven catalogs. Progress docs updated: gaps, ui-parity, target-app-parity, ROADMAP, parity checklist. `cargo xtask ci` passes (fmt, clippy, test, assets, layers, wasm). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: a selected column's word count is its cells'; merged cells shade once With whole cells selected (a column, or a rectangle that isn't one run of the text) the status bar said "12 of 23 words": `Session::selected_text` took everything between the selection's ends. It now takes each piece's own text, a line each, for a column block too, so the status bar, Word Count and the other callers see what is selected. Since #669 a vertically merged cell is one box as tall as its rows, with a `covered` box for each continuation row; shading selected cells skips those, so a merged cell isn't shaded twice. `selected_paths` follows main's `para_paths_in` (#418): a selection ending at the start of the next paragraph doesn't take it. - Test: a selected column's text is its three cells' and Word Count says three words. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: double-click AutoFit and the "+" buttons work as in Word Checked against Word (2019, Windows): - A double-click on a column border fits the column left of it to its contents and the columns right of it keep their widths, moving with the border, so the table narrows or widens (up to the right margin). The right neighbour used to give or take the difference. - A "+" insert button selects the new row or column (the caret used to go into it); typing then goes into its first cell. If the table can't take another row or column, nothing changes. - A double-click along a cell's left edge (the cell selection area) selects its row. - Tests: engine (fit keeps the columns on the right; insert selects the new row or column, typing lands in its first cell) and kittest (real double-click on a border; "+" selects the row; double-click by a cell's edge selects the row). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: drags and Shift+arrows over cells select whole cells An ordinary drag, Shift+click or Shift+arrow from one table cell into another now selects the rectangle of whole cells between them, as Word does, instead of the run of text between the two points: bold, alignment and Delete leave the cells outside the rectangle alone (they already did for Select Column and the table's selection areas). Between a cell and text outside its table the selection takes whole rows, from the cell's row out to the table's edge, and the text beyond. Extending again goes on from where the selection really started and ends: dragging back into the first cell selects its text again, Shift+Up after Shift+Down shrinks the rectangle, and from a nested table's cell into another cell of the table around it the outer table's cells are taken. - Engine: `table::extend_selection` (the rule, down through nested tables) and `Session::sel_ends` (where a widened selection really runs); every caret command run with `extend` goes through it in `column::dispatch`, so agents get the same with `caret.*`. - UI: a text drag extends through `caret.set` (still straight to the session, so nothing scrolls on every frame); the view follows the real caret. - Tests: engine (drag across cells and back, nested tables, Shift+Down and Shift+Up through and past a table, Shift+click, from text into a table) and a kittest with a real mouse drag. Progress docs updated: gaps (the known gap from #637 is gone), ui-parity, target-app-parity, ROADMAP. `cargo xtask ci` passes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: rabis <340973947+rabis7575@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-12 10:34:10 -04:00
4 people	8ca285ca9d	Tables: select, insert and move with the mouse; double-click a border to AutoFit (#637) ... * Tables: select, insert and move with the mouse; double-click a border to AutoFit Like Word, on top of the border resizing: - Selection areas: just above a column the pointer becomes a down arrow, left of a row the row arrow, along a cell's left edge (inside it) the cell arrow. A click selects the column, row or cell; a drag selects every one up to the pointer. Selected cells are shaded as cells, empty ones too. - Insert buttons: left of a row border and above a column border a "+" shows with the border marked; a click adds a row or column there and puts the caret in it. - Move handle past the table's top-left corner: a click selects the table; a drag shows a dashed outline and, on release, the table floats where it is dropped with the text wrapping around it (Word's behaviour). One undo step. Nested tables and tables outside the main text are only selected. - A double-click on a column border fits the column left of it to its contents (the right neighbour gives or takes the room; on the right edge the table's width changes, up to the right margin). - Table Layout > Select > Select Column (catalog 418/449). Whole-cell selection: a column (or a rectangle of cells over several rows) is not one run of the text, so selecting it makes a block of its cells' paragraphs (`CellRange` on the existing `ColumnBlock`). Bold, alignment, Delete, typing, copy and numbering act on those cells only (a numbered column is one list); table commands (shading, merge, delete columns) take the rectangle; Tab moves on without clearing it; Undo brings the selection back. Cells of one row, or whole rows, stay an ordinary stream selection. The format painter no longer clears a block's text (edit.pasteFormat was handled like a paste). The mini toolbar stays hidden over whole-cell selections and during these drags: pinned above the selection it covered the column areas, the "+" buttons and the move handle. Engine: crates/engine/src/cmd/table_mouse.rs - table.selectAt, table.insertAt, table.moveDrag, table.fitColumn (page coordinates, so agents and the control channel can do the same) and table.selectColumn; hit testing reuses table_resize's drawn geometry, and borders keep priority for resizing. 10 engine tests (areas, a column edited cell by cell, numbering, rows/cells/drags, insert buttons, move, fit, format painter, hostile params). UI: crates/ui-egui/src/table_mouse.rs, wired into the existing canvas mouse handler (no extra ui.interact areas, so clicks in a cell's text still place the caret); kittest tests with real pointer events: column click, row drag, "+" button, move-handle drag in one undo step, double-click fit. New labels translated in all eleven catalogs. Progress docs updated: gaps, ui-parity, target-app-parity, ROADMAP, parity checklist. `cargo xtask ci` passes (fmt, clippy, test, assets, layers, wasm). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: a selected column's word count is its cells'; merged cells shade once With whole cells selected (a column, or a rectangle that isn't one run of the text) the status bar said "12 of 23 words": `Session::selected_text` took everything between the selection's ends. It now takes each piece's own text, a line each, for a column block too, so the status bar, Word Count and the other callers see what is selected. Since #669 a vertically merged cell is one box as tall as its rows, with a `covered` box for each continuation row; shading selected cells skips those, so a merged cell isn't shaded twice. `selected_paths` follows main's `para_paths_in` (#418): a selection ending at the start of the next paragraph doesn't take it. - Test: a selected column's text is its three cells' and Word Count says three words. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tables: double-click AutoFit and the "+" buttons work as in Word Checked against Word (2019, Windows): - A double-click on a column border fits the column left of it to its contents and the columns right of it keep their widths, moving with the border, so the table narrows or widens (up to the right margin). The right neighbour used to give or take the difference. - A "+" insert button selects the new row or column (the caret used to go into it); typing then goes into its first cell. If the table can't take another row or column, nothing changes. - A double-click along a cell's left edge (the cell selection area) selects its row. - Tests: engine (fit keeps the columns on the right; insert selects the new row or column, typing lands in its first cell) and kittest (real double-click on a border; "+" selects the row; double-click by a cell's edge selects the row). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: rabis <340973947+rabis7575@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Brandon Thomas <echelon@gmail.com>	2026-10-12 10:15:31 -04:00