A field with \* Lower \* Caps applied only \* Lower, so a title of
WEEKLY REPORT showed as weekly report. Every capitalization switch in a
field code now applies in turn, and the example shows Weekly Report.
A field or table formula with \* DollarText or \* Hex showed its digits,
and PAGE \* ArabicDash showed the plain page number. \* DollarText now
writes the result in lowercase cardinal text with "and" and the first two
decimals (rounded) over 100, so { = 9.20 + 5.35 \* DollarText \* Upper }
shows FOURTEEN AND 55/100. \* Hex writes uppercase hexadecimal digits
(458 shows 1CA). PAGE \* ArabicDash shows the page number between
hyphens ("- 31 -"); other fields, PAGEREF included, skip it. The
page-number, SEQ, PAGEREF and count fields and table formulas read both
switches. Cardinal, ordinal and dollar text keep the digits of a number
past 999,999. Before, \* CardText showed such a number as "nine hundred
ninety-nine thousand nine hundred ninety-nine" and \* OrdText as "nine
hundred ninety-nine thousand nine hundred ninety-ninth".
Update Field and the page-number fields ignored the capitalization
switches, so TITLE \* Upper or FILENAME \* Lower showed the text as
stored. A \* CardText or \* OrdText result started with a capital
("Twelve"), where Word shows it in lowercase unless a capitalization
switch follows. A table formula with a \* switch, such as
=SUM(A1:B2) \* CardText or =SUM(ABOVE) \* MERGEFORMAT, was a syntax
error.
The results of the document information fields, DOCPROPERTY,
FILENAME, the dates, REF, PAGEREF, SEQ, STYLEREF and table formulas
now take the field's \* Upper, \* Lower, \* Caps or \* FirstCap switch
when Update Field computes them. PAGE, NUMPAGES, SECTION,
SECTIONPAGES, PAGEREF and STYLEREF take it when they are laid out.
Cardinal and ordinal text is lowercase ("twelve", "seventh") unless
one of the switches follows. WordCraft now reads a table formula's \*
switches separately from the formula. A whole-number result that a \*
number format such as CardText or roman covers is written in that
format; any other result, and any other \* switch, leaves the digits.
Table Layout › Data › Formula keeps the \* switches as typed.
A paragraph with a PAGE field is cached by the page number, the totals, the
section and the bookmarks, but not by the number format the field shows the
page number in. Paginating lays the footer out to know where the body ends,
before the section's number format is set in the field context, so as
decimal. When the body shows NUMPAGES or SECTIONPAGES, the pass that has the
right totals made that layout's key equal to the page's own footer's, and the
cached decimal one was drawn: page 2 of a section numbered in lower-case
roman showed "2", not "ii". The number format is now part of the key.
Co-authored-by: dfgodvan <180286157+dfgodvan@users.noreply.github.com>
* #1765: WIP
* #1765: ASK and SET fields show nothing
Like Word, ASK and SET only assign text to a bookmark: they draw no
result on the page or in a PDF. The stored result is kept and saved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* file-format-parity: note ASK/SET on the existing Fields row instead of a third one
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* #775: STYLEREF fields in headers and footers show each page's result
Running headers/footers with STYLEREF (e.g. the current chapter title) are
evaluated per page at layout time (ECMA-376 §17.16.5.59): the page's first
paragraph of the style (\l: last), else the nearest before, else after.
Style names/ids, heading levels (STYLEREF 1), character styles, and the
\n \r \w \s \t \p switches. Body STYLEREF fields update with the other
fields. STYLEREF added to Insert › Quick Parts › Field with its options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* #775: STYLEREF error text in our own words
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Review fixes for #882: translate the STYLEREF Field dialog strings
Adds the style picker label, the six STYLEREF switch labels and the
STYLEREF description to all 18 interface catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STYLEREF: reuse the style index while the body and styles are unchanged
Headers with STYLEREF rebuilt and hashed the body's style index on every
layout pass (echelon's follow-up note on #882). The layout cache now keeps
the index with the body blocks it came from (shared, so an edited block is
a different pointer) and the styles/numbering hash, and rebuilds it only
when either changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* vi: STYLEREF field strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Dmitrii Khlapov <19991457+dkhlapov@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Fields: PAGEREF in headers and footers shows its bookmark's page
Headers and footers are laid out once the body is paginated, so a page
reference there now shows the number of the page its bookmark starts on, in
that page's number format, instead of the result stored in the file. Like the
page totals in headers and footers, it is filled in after pagination and
doesn't make the body lay out again. Mail-merged letters use this for
"Page X of Y" per letter (Y = PAGEREF to a bookmark at the letter's end). Page
references in the body keep their result until fields are updated.
* Contributors: add cyril265
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Numbering: Chinese, Japanese and Korean number formats (一、二、三 …) (#534)
A list with w:numFmt="chineseCounting" and lvlText "%1、" showed "2、", and the
digit was drawn with glyph ids of the CJK font that supplied the comma, so it
came out as an unrelated letter: the list label was laid out in font runs but
drawn with the style of its last run only.
- NumFormat knows every ST_NumberFormat value (ECMA-376 §17.18.59), so a file
saves back the format it was opened with; unknown values are decimal.
- New doc::cjk_numbers: Chinese/Taiwanese counting (with 十 below 100, digit by
digit above) and counting-thousand (百/千/万/亿, 零 for gaps), simplified and
traditional legal numerals, Japanese counting/legal/digital ten-thousand,
Korean counting/digital/legal, ideograph digits, heavenly stems, earthly
branches and the sixty-year cycle, aiueo/iroha (half and full width),
ganada/chosung, enclosed numbers (①, ⒈, ⑴, ㊀) and full-width digits. Values
past a sequence's end fall back to decimal.
- Legal numbering (w:isLgl) shows every level, the current one too, in decimal.
- List labels keep their font runs and draw each with its own face.
- A list level without w:ind no longer gets a 36pt indent on read.
- .doc number format codes 0x00-0x27 map to the formats (0x16 decimalZero).
- PAGE/NUMPAGES fields take \* ChineseNum1/2/3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* rustfmt after merging main
* Layout test: end the list range inside the third paragraph (#477 skips a paragraph the range ends at the start of)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* References dialogs: Caption, Index, Table of Contents, Create Source (#402)
- Caption: labels (built-in plus New/Delete Label, kept with the interface
settings), above/below the item, leave the label out, Numbering (format,
chapter number from a heading level with a separator) -> SEQ \* \s and
STYLEREF n \s fields; Update Field renumbers SEQ with \s restarts, \r, \c, \h.
- Index: indented/run-in, columns, right-aligned page numbers with tab leader,
letter headings -> INDEX \h \c \e \r; Mark Index Entry (subentry,
cross-reference, page-range bookmark, bold/italic page numbers, Mark All)
-> XE \t \r \b \i. The index is rebuilt honouring them; columns become a
continuous section of their own. Index commands move to cmd/index.rs.
- Custom Table of Contents: page numbers, right align, tab leader,
hyperlinks, levels, Options (heading styles, other styles with levels,
outline levels, TC fields), Modify for TOC 1-9 -> TOC \o \h \z \u \t \f
\l \n \p; updating honours them (hyperlinks to _Toc bookmarks).
- Source Manager and Create/Edit Source: source types with their fields,
show every bibliography field (new Source fields); Insert Citation menu
lists the sources and Add New Source.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fmt (#402)
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
- Model: NoteProps (pos, numFmt, numStart, numRestart) in the settings and
each section; Document::note_options resolves section > document > defaults.
- DOCX: w:footnotePr / w:endnotePr read and written in settings and every
w:sectPr in schema order; hostile numStart clamped (ECMA-376 §17.11).
- Layout: footnotes below the text, endnotes at the end of each section,
numbering restarted per section or per page (from where notes land, at
most three passes), per-section number formats.
- Commands: references.noteOptions takes kind/pos/numFmt/numStart/
numRestart/scope; references.convertNotes (footnote/endnote/swap, one
undo step); references.footnote/endnote take a custom mark.
- UI: Footnote and Endnote dialog from the Footnotes group launcher;
strings in every catalog.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Show field codes instead of results with View > Field Codes (Alt+F9) or
per field with Toggle Field Codes (Shift+F9); a field showing its code is
drawn as { CODE } on light grey. Edit a field's code in a small popup
(double-click a field showing its code, right-click > Edit Field..., or
fields.setCode), and Ctrl+F9 asks for a new field's code. F9 updates
fields and shows the selected ones' results again.
New commands: fields.unlink (Ctrl+Shift+F9) replaces fields with their
text, fields.lock / fields.unlock (Ctrl+F11 / Ctrl+Shift+F11) keep a
result through updates (already saved as w:fldLock), fields.next /
fields.previous (F11 / Shift+F11) select the next or previous field, and
fields.selected reports the fields in the selection. Range fields
(citations) can be locked, unlinked, edited and stepped through too.
The right-click menu gains Update Field, Edit Field... and Toggle Field
Codes when the selection holds a field. Strings are translated in every
catalog; parity catalog, ui-parity, gaps and roadmap updated.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Clean-room foundations for WordCraft: Arc-shared document model with
paragraph/run editing, styles, lists, sections and tables; Word-style
font substitution; first-fit line breaking with tabs, lists, alignment,
pagination, tables, headers/footers and hit testing; vello_cpu page
rasteriser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
