vectorcraft/crates/engine/src/cmd/edit.rs

//! File (document-level) and Edit commands, plus document queries.

use std::sync::Arc;

use serde_json::{Value, json};
use vectorcraft_doc::{Document, Node, NodeId, Unit};
use vectorcraft_geom::{Affine, Vec2};

use super::*;
use crate::{EngineError, inspect};

pub fn specs() -> Vec<CommandSpec> {
    vec![
        cmd!(
            "file.new",
            "New…",
            ["File"],
            Some("Cmd+N"),
            "{width?: pt=612, height?: pt=792, units?: \"Points\"|\"Inches\"|\"Millimeters\"|\"Pixels\"…, title?, artboards?: n, colorMode?: \"rgb\"|\"cmyk\" (a CMYK document starts with CMYK swatches and stores the colours applied to it as CMYK)}",
            always,
            file_new
        ),
        cmd!("file.close", "Close", ["File"], Some("Cmd+W"), "{index?}", has_doc, file_close),
        cmd!("document.activate", "Activate Document", [], None, "{index}", always, doc_activate),
        cmd!(query "document.inspect", "Inspect Document", [], None, "{} → layer tree, artboards, selection, history", has_doc, |s, _| Ok(inspect::document(s))),
        cmd!(query "document.node", "Inspect Object", [], None, "{id} → full object JSON", has_doc, doc_node),
        cmd!(query "document.json", "Document JSON", [], None, "{} → complete document model", has_doc, |s, _| Ok(serde_json::to_value(&*s.doc()?.doc).unwrap_or(Value::Null))),
        cmd!(
            "document.setUnits",
            "Units",
            ["File", "Document Setup"],
            None,
            "{units: \"Points\"|\"Picas\"|\"Inches\"|\"Millimeters\"|\"Centimeters\"|\"Pixels\"}",
            has_doc,
            set_units
        ),
        cmd!("edit.undo", "Undo", ["Edit"], Some("Cmd+Z"), "{}", can_undo, undo),
        cmd!("edit.redo", "Redo", ["Edit"], Some("Cmd+Shift+Z"), "{}", can_redo, redo),
        cmd!("edit.cut", "Cut", ["Edit"], Some("Cmd+X"), "{}", has_selection, cut),
        cmd!("edit.copy", "Copy", ["Edit"], Some("Cmd+C"), "{}", has_selection, copy),
        cmd!("edit.paste", "Paste", ["Edit"], Some("Cmd+V"), "{dx?, dy?}", has_clipboard, |s, p| paste(s, p, PasteMode::Offset)),
        cmd!("edit.pasteInFront", "Paste in Front", ["Edit"], Some("Cmd+F"), "{}", has_clipboard, |s, p| paste(s, p, PasteMode::Front)),
        cmd!("edit.pasteInBack", "Paste in Back", ["Edit"], Some("Cmd+B"), "{}", has_clipboard, |s, p| paste(s, p, PasteMode::Back)),
        cmd!("edit.pasteInPlace", "Paste in Place", ["Edit"], Some("Cmd+Shift+V"), "{}", has_clipboard, |s, p| paste(s, p, PasteMode::InPlace)),
        cmd!("edit.pasteOnAllArtboards", "Paste on All Artboards", ["Edit"], Some("Cmd+Alt+Shift+V"), "{}", has_clipboard, |s, p| paste(
            s,
            p,
            PasteMode::AllArtboards
        )),
        cmd!("edit.clear", "Clear", ["Edit"], Some("Delete"), "{ids?}", has_selection, clear),
        cmd!("edit.duplicate", "Duplicate", [], None, "{dx?, dy?} duplicate the selection in place (offset optional)", has_selection, duplicate),
    ]
}

fn file_new(s: &mut Session, p: &Value) -> Result<Value> {
    let w = f64_or(p, "width", 612.0);
    let h = f64_or(p, "height", 792.0);
    if !(w > 0.0 && h > 0.0) || w > 16383.0 * 10.0 || h > 16383.0 * 10.0 {
        return Err(bad("file.new", "width/height must be positive and within the canvas"));
    }
    let mode = match str_param(p, "colorMode") {
        Some(m) if m.eq_ignore_ascii_case("cmyk") => vectorcraft_doc::ColorMode::Cmyk,
        _ => vectorcraft_doc::ColorMode::Rgb,
    };
    let mut d = Document::new_with_mode(w, h, mode);
    d.title = str_param(p, "title").map(str::to_string).unwrap_or_else(|| s.next_untitled());
    if let Some(u) = str_param(p, "units") {
        d.units = parse_unit(u).ok_or_else(|| bad("file.new", format!("unknown units `{u}`")))?;
    }
    let n = p.get("artboards").and_then(Value::as_u64).unwrap_or(1).clamp(1, 1000) as usize;
    for i in 1..n {
        let r = vectorcraft_geom::Rect::new(0.0, 0.0, w, h) + Vec2::new(i as f64 * (w + 20.0), 0.0);
        d.artboards.push(vectorcraft_doc::Artboard {
            id: (i + 1) as u32,
            name: format!("Artboard {}", i + 1),
            rect: r,
            show_center_mark: false,
            show_cross_hairs: false,
        });
    }
    let i = s.add_document(d, None);
    Ok(json!({ "index": i }))
}

pub(crate) fn parse_unit(u: &str) -> Option<Unit> {
    let n = u.to_ascii_lowercase();
    Unit::ALL.into_iter().find(|x| x.label().to_ascii_lowercase() == n || x.suffix() == n)
}

fn file_close(s: &mut Session, p: &Value) -> Result<Value> {
    let i = p.get("index").and_then(Value::as_u64).map(|v| v as usize).or(s.active_index()).ok_or(EngineError::NoDocument)?;
    if !s.close_document(i) {
        return Err(bad("file.close", "no such document"));
    }
    ok()
}

fn doc_activate(s: &mut Session, p: &Value) -> Result<Value> {
    let i = p.get("index").and_then(Value::as_u64).ok_or_else(|| bad("document.activate", "missing index"))? as usize;
    if s.set_active(i) { ok() } else { Err(bad("document.activate", "no such document")) }
}

fn doc_node(s: &mut Session, p: &Value) -> Result<Value> {
    let id = id_param(p, "id").ok_or_else(|| bad("document.node", "missing id"))?;
    let n = s.doc()?.doc.node(id).ok_or(EngineError::NoNode(id))?;
    Ok(serde_json::to_value(n).unwrap_or(Value::Null))
}

fn set_units(s: &mut Session, p: &Value) -> Result<Value> {
    let u = str_param(p, "units").and_then(parse_unit).ok_or_else(|| bad("document.setUnits", "unknown units"))?;
    s.edit("Document Setup", |d, _| {
        d.units = u;
        Ok(())
    })?;
    ok()
}

fn undo(s: &mut Session, _: &Value) -> Result<Value> {
    s.cancel_interaction()?;
    let st = s.doc_mut()?;
    let e = st.history.undo.pop().ok_or_else(|| EngineError::Other("nothing to undo".into()))?;
    let label = e.label.clone();
    let editing = st.doc.mask_edit.map(|m| m.layer);
    st.history.redo.push(crate::HistoryEntry {
        label: e.label,
        doc: std::mem::replace(&mut st.doc, e.doc),
        selection: std::mem::replace(&mut st.selection, e.selection),
    });
    st.revision += 1;
    st.selection.prune(&st.doc);
    super::maskedit::follow_history(st, editing);
    Ok(json!({ "undone": label }))
}

fn redo(s: &mut Session, _: &Value) -> Result<Value> {
    let st = s.doc_mut()?;
    let e = st.history.redo.pop().ok_or_else(|| EngineError::Other("nothing to redo".into()))?;
    let label = e.label.clone();
    let editing = st.doc.mask_edit.map(|m| m.layer);
    st.history.undo.push(crate::HistoryEntry {
        label: e.label,
        doc: std::mem::replace(&mut st.doc, e.doc),
        selection: std::mem::replace(&mut st.selection, e.selection),
    });
    st.revision += 1;
    st.selection.prune(&st.doc);
    super::maskedit::follow_history(st, editing);
    Ok(json!({ "redone": label }))
}

/// Selected top-level objects in paint order, dropping any whose ancestor is also selected.
pub(crate) fn selected_roots(s: &Session) -> Result<Vec<NodeId>> {
    let st = s.doc()?;
    // A selected compound-path member acts as its compound (Illustrator treats compounds as one object).
    let mut sel: Vec<NodeId> = st
        .selection
        .in_paint_order(&st.doc)
        .into_iter()
        .map(|id| match st.doc.parent_of(id).and_then(|p| st.doc.node(p).map(|n| (p, n))) {
            Some((p, n)) if matches!(n.kind, vectorcraft_doc::NodeKind::Compound { .. }) => p,
            _ => id,
        })
        .collect();
    sel.dedup();
    Ok(sel
        .iter()
        .copied()
        .filter(|id| {
            let anc = st.doc.ancestry(*id).unwrap_or_default();
            !anc[..anc.len().saturating_sub(1)].iter().any(|a| sel.contains(a))
        })
        .filter(|id| st.doc.node(*id).is_some_and(|n| !n.is_layer()))
        .collect())
}

fn copy(s: &mut Session, _: &Value) -> Result<Value> {
    let roots = selected_roots(s)?;
    let st = s.doc()?;
    let nodes: Vec<Node> = roots.iter().filter_map(|id| st.doc.node(*id).cloned()).collect();
    let n = nodes.len();
    s.clipboard = nodes;
    Ok(json!({ "copied": n }))
}

fn cut(s: &mut Session, p: &Value) -> Result<Value> {
    copy(s, p)?;
    clear(s, &json!({}))
}

fn clear(s: &mut Session, p: &Value) -> Result<Value> {
    // Direct-selected anchors: delete those anchors instead of whole objects.
    if ids_param(p, "ids").is_none() && !s.doc()?.selection.anchors.is_empty() {
        return super::path::delete_anchors(s, p);
    }
    let ids = match ids_param(p, "ids") {
        Some(v) => v,
        None => selected_roots(s)?,
    };
    s.edit("Clear", |d, sel| {
        for id in &ids {
            if d.node(*id).is_some_and(|n| n.is_layer()) {
                continue;
            }
            let _ = d.remove(*id);
        }
        sel.clear();
        Ok(())
    })?;
    ok()
}

enum PasteMode {
    Offset,
    Front,
    Back,
    InPlace,
    AllArtboards,
}

fn paste(s: &mut Session, p: &Value, mode: PasteMode) -> Result<Value> {
    let clip = s.clipboard.clone();
    let off = s.prefs.paste_offset;
    let st = s.doc()?;
    let parent = st.insertion_parent();
    // Front/back: relative to the selection (top-most / bottom-most selected object).
    let anchor = match mode {
        PasteMode::Front | PasteMode::Back => {
            let order = st.selection.in_paint_order(&st.doc);
            let a = if matches!(mode, PasteMode::Front) { order.last() } else { order.first() };
            a.and_then(|id| st.doc.position(*id))
        }
        _ => None,
    };
    let artboards: Vec<vectorcraft_geom::Rect> = st.doc.artboards.iter().map(|a| a.rect).collect();
    let dx = f64_or(p, "dx", off);
    let dy = f64_or(p, "dy", off);
    let label = match mode {
        PasteMode::Front => "Paste in Front",
        PasteMode::Back => "Paste in Back",
        PasteMode::InPlace => "Paste in Place",
        PasteMode::AllArtboards => "Paste on All Artboards",
        PasteMode::Offset => "Paste",
    };
    let ids = s.edit(label, |d, sel| {
        let mut new_ids = vec![];
        let placements: Vec<Affine> = match mode {
            PasteMode::Offset => vec![Affine::translate((dx, dy))],
            PasteMode::AllArtboards => {
                let src = d.artboards.first().map(|a| a.rect.origin()).unwrap_or_default();
                artboards.iter().map(|r| Affine::translate(r.origin() - src)).collect()
            }
            _ => vec![Affine::IDENTITY],
        };
        for xf in placements {
            for (k, n) in clip.iter().enumerate() {
                let mut c = d.reid(n);
                if xf != Affine::IDENTITY {
                    c.transform(xf, false);
                }
                let (par, idx) = match anchor {
                    Some((par, i, _)) => (par, if matches!(mode, PasteMode::Front) { i + 1 + k } else { i + k }),
                    None => (parent, usize::MAX),
                };
                new_ids.push(d.insert(par, idx, c)?);
            }
        }
        sel.set(new_ids.iter().copied());
        Ok(new_ids)
    })?;
    Ok(json!({ "ids": ids.iter().map(|i| i.0).collect::<Vec<_>>() }))
}

fn duplicate(s: &mut Session, p: &Value) -> Result<Value> {
    let roots = selected_roots(s)?;
    let dx = f64_or(p, "dx", 0.0);
    let dy = f64_or(p, "dy", 0.0);
    let ids = s.edit("Duplicate", |d, sel| duplicate_in(d, sel, &roots, Affine::translate((dx, dy))))?;
    Ok(json!({ "ids": ids.iter().map(|i| i.0).collect::<Vec<_>>() }))
}

/// Duplicate `roots` directly above each original, transform the copies, select them.
pub(crate) fn duplicate_in(d: &mut Document, sel: &mut vectorcraft_doc::Selection, roots: &[NodeId], xf: Affine) -> Result<Vec<NodeId>> {
    let mut out = vec![];
    for id in roots {
        let Some((par, idx, _)) = d.position(*id) else { continue };
        let Some(n) = d.node(*id).cloned() else { continue };
        let mut c = d.reid(&n);
        c.transform(xf, true);
        out.push(d.insert(par, idx + 1, c)?);
    }
    sel.set(out.iter().copied());
    Ok(out)
}

#[allow(dead_code)]
pub(crate) fn arc_nodes(v: Vec<Node>) -> Vec<Arc<Node>> {
    v.into_iter().map(Arc::new).collect()
}