//! Convert to Shape, Round Corners and Scribble.

use serde_json::{Value, json};
use vectorcraft_geom::kurbo;
use vectorcraft_geom::shapes::{self, KAPPA};
use vectorcraft_geom::{Affine, Anchor, PathData, Point, Rect, SubPath, corners};

use crate::util::{catmull_rom, flag, noise, num, seed};

/// Convert to Shape (rectangle / rounded rectangle / ellipse) around the bounds.
pub fn convert_to_shape(id: &str, b: Rect, p: &Value) -> PathData {
    let r = if flag(p, "relative", true) {
        let (ew, eh) = (num(p, "extraW", 18.0), num(p, "extraH", 18.0));
        let r = b.inflate(ew / 2.0, eh / 2.0);
        Rect::new(r.x0.min(b.center().x), r.y0.min(b.center().y), r.x1.max(b.center().x), r.y1.max(b.center().y))
    } else {
        let (w, h) = (num(p, "width", 100.0).abs(), num(p, "height", 100.0).abs());
        Rect::from_center_size(b.center(), (w, h))
    };
    match id {
        "convertToShape.ellipse" => shapes::ellipse(r),
        "convertToShape.roundedRectangle" => shapes::rounded_rectangle(r, num(p, "radius", 9.0)),
        _ => shapes::rectangle(r),
    }
}

/// Round Corners: every sharp, handle-less corner becomes a circular-ish arc of `radius`. A corner
/// whose anchor carries a handle (where a curve meets a line, or two curves meet) gets Live
/// Corners' round cut instead ([`corners::cut_corners`], #1144): it meets each side `radius` from
/// the corner, measured along the side, and trims a curved side to what is left of it.
pub fn round_corners(path: &PathData, radius: f64) -> PathData {
    if radius <= 0.0 {
        return path.clone();
    }
    let mut subs = vec![];
    // Per anchor of the result: an anchor with a handle, kept as it was, for the cut below.
    let mut with_handle = vec![];
    for sp in &path.subpaths {
        let n = sp.anchors.len();
        if n < 3 && (n != 2 || sp.closed) {
            with_handle.extend(sp.anchors.iter().map(|a| a.has_in() || a.has_out()));
            subs.push(sp.clone());
            continue;
        }
        let mut out: Vec<Anchor> = vec![];
        for i in 0..n {
            let a = sp.anchors[i];
            let interior = sp.closed || (i > 0 && i + 1 < n);
            if !interior || a.has_in() || a.has_out() {
                with_handle.push(a.has_in() || a.has_out());
                out.push(a);
                continue;
            }
            let prev = &sp.anchors[(i + n - 1) % n];
            let next = &sp.anchors[(i + 1) % n];
            // Tangent directions toward the neighbours (their handles if the segments curve).
            let tp = if prev.has_out() { prev.h_out } else { prev.p };
            let tn = if next.has_in() { next.h_in } else { next.p };
            let (vp, vn) = (tp - a.p, tn - a.p);
            let (lp, ln) = (vp.hypot(), vn.hypot());
            if lp < 1e-9 || ln < 1e-9 {
                with_handle.push(false);
                out.push(a);
                continue;
            }
            let (up, un) = (vp / lp, vn / ln);
            // Nearly straight: nothing to round.
            if up.dot(un) < -0.9999 {
                with_handle.push(false);
                out.push(a);
                continue;
            }
            let d = radius.min(prev.p.distance(a.p) / 2.0).min(next.p.distance(a.p) / 2.0);
            let pa = a.p + up * d;
            let pb = a.p + un * d;
            let k = d * KAPPA;
            with_handle.extend([false, false]);
            out.push(Anchor::with_handles(pa, pa, pa - up * k));
            out.push(Anchor::with_handles(pb, pb - un * k, pb));
        }
        subs.push(SubPath::new(out, sp.closed));
    }
    let rounded = PathData::new(subs);
    // The corners left: those whose anchor has a handle. Their cut reaches `radius` along each
    // side, as above; setback = r · (1 + cos) / sin, solved for the arc's radius r.
    let mut radii = vec![0.0; with_handle.len()];
    for c in corners::path_corners(&rounded) {
        if with_handle.get(c.index) == Some(&true)
            && let Some(r) = radii.get_mut(c.index)
        {
            *r = radius * c.sin() / (1.0 + c.cos());
        }
    }
    if radii.iter().all(|r| *r == 0.0) {
        return rounded;
    }
    let (mut out, sources) = corners::cut_corners(&rounded, &radii, &[]);
    // `cut_corners` starts a closed subpath whose first corner it cuts at the end of that cut;
    // start at its start instead, as the rounding above does, so what depends on where a path
    // starts (dashes, arrowheads after the effect) doesn't move.
    for (sp, from) in out.subpaths.iter_mut().zip(&sources) {
        if sp.closed && sp.anchors.len() > 1 && from.first() == from.last() {
            sp.anchors.rotate_right(1);
        }
    }
    out
}

fn flatten(path: &PathData) -> Vec<Vec<Point>> {
    let mut polys: Vec<Vec<Point>> = vec![];
    kurbo::flatten(path.to_bezpath(), 0.25, |el| match el {
        kurbo::PathEl::MoveTo(p) => polys.push(vec![p]),
        kurbo::PathEl::LineTo(p) => {
            if let Some(l) = polys.last_mut() {
                l.push(p)
            }
        }
        kurbo::PathEl::ClosePath => {
            if let Some(l) = polys.last_mut()
                && let Some(&f) = l.first()
            {
                l.push(f)
            }
        }
        _ => {}
    });
    polys
}

/// Whether segment `p`–`q` properly crosses an edge of `polys`: its own ends, which lie on the
/// outline, don't count, nor does running along an edge.
fn crosses_outline(p: Point, q: Point, polys: &[Vec<Point>]) -> bool {
    let (p, q) = (p.lerp(q, 1e-3), q.lerp(p, 1e-3));
    let side = |a: Point, b: Point, c: Point| (b - a).cross(c - a);
    // Strictly on opposite sides, beyond rounding noise (the sides are areas: length × length).
    let apart = |s1: f64, s2: f64, eps: f64| (s1 > eps && s2 < -eps) || (s1 < -eps && s2 > eps);
    let pq = (q - p).hypot();
    polys.iter().any(|pl| {
        pl.windows(2).any(|w| {
            let (a, b) = (w[0], w[1]);
            let eps = 1e-9 * pq * (b - a).hypot();
            apart(side(p, q, a), side(p, q, b), eps) && apart(side(a, b, p), side(a, b, q), eps)
        })
    })
}

/// One named Settings entry in Effect › Stylize › Scribble (public feature names; parameter sets
/// are chosen for VectorCraft).
pub struct ScribbleSetting {
    pub id: &'static str,
    pub label: &'static str,
    pub params: Value,
}

/// The Scribble dialog's Settings presets, in menu order.
pub fn scribble_settings() -> &'static [ScribbleSetting] {
    static PRESETS: std::sync::OnceLock<Vec<ScribbleSetting>> = std::sync::OnceLock::new();
    PRESETS.get_or_init(|| {
        [
            ("default", "Default", json!({"angle": 30.0, "overlap": 0.0, "overlapVariation": 0.5, "strokeWidth": 3.0, "curviness": 5.0, "curvinessVariation": 0.0, "spacing": 5.0, "spacingVariation": 0.5})),
            ("childlike", "Childlike", json!({"angle": 45.0, "overlap": 2.0, "overlapVariation": 2.0, "strokeWidth": 2.0, "curviness": 15.0, "curvinessVariation": 30.0, "spacing": 4.0, "spacingVariation": 1.5})),
            ("dense", "Dense", json!({"angle": 30.0, "overlap": 0.0, "overlapVariation": 0.0, "strokeWidth": 3.0, "curviness": 0.0, "curvinessVariation": 0.0, "spacing": 2.0, "spacingVariation": 0.0})),
            ("loose", "Loose", json!({"angle": 30.0, "overlap": 0.0, "overlapVariation": 1.0, "strokeWidth": 2.0, "curviness": 20.0, "curvinessVariation": 40.0, "spacing": 12.0, "spacingVariation": 3.0})),
            ("moire", "Moire", json!({"angle": 0.0, "overlap": 0.0, "overlapVariation": 0.0, "strokeWidth": 1.0, "curviness": 80.0, "curvinessVariation": 10.0, "spacing": 3.0, "spacingVariation": 0.5})),
            ("sharp", "Sharp", json!({"angle": 30.0, "overlap": 0.0, "overlapVariation": 0.0, "strokeWidth": 2.0, "curviness": 0.0, "curvinessVariation": 0.0, "spacing": 3.0, "spacingVariation": 0.0})),
            ("sketch", "Sketch", json!({"angle": 30.0, "overlap": -1.0, "overlapVariation": 0.5, "strokeWidth": 2.0, "curviness": 10.0, "curvinessVariation": 15.0, "spacing": 6.0, "spacingVariation": 1.0})),
            ("snarl", "Snarl", json!({"angle": 15.0, "overlap": 3.0, "overlapVariation": 3.0, "strokeWidth": 4.0, "curviness": 40.0, "curvinessVariation": 50.0, "spacing": 8.0, "spacingVariation": 4.0})),
            ("swash", "Swash", json!({"angle": 60.0, "overlap": 5.0, "overlapVariation": 2.0, "strokeWidth": 5.0, "curviness": 30.0, "curvinessVariation": 20.0, "spacing": 10.0, "spacingVariation": 2.0})),
            ("tight", "Tight", json!({"angle": 30.0, "overlap": 0.0, "overlapVariation": 0.0, "strokeWidth": 3.0, "curviness": 5.0, "curvinessVariation": 0.0, "spacing": 2.0, "spacingVariation": 0.2})),
            ("zigzag", "Zigzag", json!({"angle": 90.0, "overlap": 0.0, "overlapVariation": 0.0, "strokeWidth": 3.0, "curviness": 0.0, "curvinessVariation": 0.0, "spacing": 8.0, "spacingVariation": 0.0})),
        ]
        .into_iter()
        .map(|(id, label, params)| ScribbleSetting { id, label, params })
        .collect()
    })
}

/// Which Settings preset matches `params` (seed ignored), if any.
pub fn scribble_setting_id(params: &Value) -> Option<&'static str> {
    let obj = params.as_object()?;
    scribble_settings().iter().find(|p| p.params.as_object().is_some_and(|want| scribble_params_match(obj, want))).map(|p| p.id)
}

fn scribble_params_match(have: &serde_json::Map<String, Value>, want: &serde_json::Map<String, Value>) -> bool {
    want.iter().all(|(k, v)| have.get(k).is_some_and(|a| scribble_param_eq(a, v)))
}

fn scribble_param_eq(a: &Value, b: &Value) -> bool {
    match (a.as_f64(), b.as_f64()) {
        (Some(x), Some(y)) => (x - y).abs() < 1e-6,
        _ => a == b,
    }
}

/// Scribble (simplified): a zig-zag hatching across the filled area at `angle`, one per region
/// of the shape, outlined to `strokeWidth` so the fill paints it. `overlapVariation` moves each
/// line's ends along it by up to that many points, `spacingVariation` moves them across it, and
/// each turn's curviness moves from `curviness` by up to `curvinessVariation` percent.
pub fn scribble(path: &PathData, b: Rect, p: &Value) -> PathData {
    let angle = num(p, "angle", 30.0).to_radians();
    let overlap = num(p, "overlap", 0.0);
    let width = num(p, "strokeWidth", 3.0).clamp(0.01, 1000.0);
    let curviness = num(p, "curviness", 5.0).clamp(0.0, 100.0);
    let curvy = curviness / 100.0;
    let curvy_var = num(p, "curvinessVariation", 0.0).clamp(0.0, 100.0);
    let spacing = num(p, "spacing", 5.0).max(0.1);
    let along = num(p, "overlapVariation", 0.5).clamp(0.0, 100.0);
    let across = num(p, "spacingVariation", 0.5).clamp(0.0, 100.0);
    let seed = seed(p);
    let c = b.center();
    let to_local = Affine::translate(c.to_vec2()) * Affine::rotate(angle) * Affine::translate(-c.to_vec2());
    let from_local = to_local.inverse();
    let polys: Vec<Vec<Point>> = flatten(path).into_iter().map(|pl| pl.into_iter().map(|q| from_local * q).collect()).collect();
    let (mut y0, mut y1) = (f64::INFINITY, f64::NEG_INFINITY);
    for q in polys.iter().flatten() {
        y0 = y0.min(q.y);
        y1 = y1.max(q.y);
    }
    if !y0.is_finite() || y1 - y0 < 1e-9 {
        return PathData::default();
    }
    let step = spacing.max((y1 - y0) / 2000.0);
    // One zig-zag per region (#1648): a span continues a chain of the previous row as long as the
    // line from that row's end to this one's start stays inside the shape; otherwise it starts a
    // chain of its own. So no line crosses a hole or a notch. In a convex shape that line always
    // stays inside: one chain, as before.
    struct Chain {
        pts: Vec<Point>,
        // Each point's curviness noise in [-1, 1].
        bends: Vec<f64>,
        end: Point,
        row: u64,
    }
    let mut chains: Vec<Chain> = vec![];
    let mut row = 0u64;
    // Rows are counted, not summed: adding a step that is below the spacing of the numbers at `y`
    // would never move it.
    while row <= 2001 {
        let y = y0 + step / 2.0 + row as f64 * step;
        if y.partial_cmp(&y1) != Some(std::cmp::Ordering::Less) {
            break;
        }
        let mut xs: Vec<f64> = vec![];
        for pl in &polys {
            for w in pl.windows(2) {
                let (a, bq) = (w[0], w[1]);
                if (a.y <= y && bq.y > y) || (bq.y <= y && a.y > y) {
                    xs.push(a.x + (y - a.y) / (bq.y - a.y) * (bq.x - a.x));
                }
            }
        }
        xs.sort_by(f64::total_cmp);
        let spans: Vec<(f64, f64)> = xs.as_chunks::<2>().0.iter().map(|s| (s[0] - overlap, s[1] + overlap)).collect();
        let open = chains.len();
        for (a, bx) in spans {
            let jitter = |k: u64, v: f64| v * noise(seed, row, k, 3);
            let (l, r) = (Point::new(a + jitter(0, along), y + jitter(1, across)), Point::new(bx + jitter(2, along), y + jitter(3, across)));
            let even = row.is_multiple_of(2);
            let pair = if even { [l, r] } else { [r, l] };
            let bend = [noise(seed, row, 4, 3), noise(seed, row, 5, 3)];
            let bend = if even { bend } else { [bend[1], bend[0]] };
            // Un-jittered ends of the span in drawing order.
            let (start, end) = if even { (Point::new(a, y), Point::new(bx, y)) } else { (Point::new(bx, y), Point::new(a, y)) };
            // The nearest chain of the previous row that this span can join without leaving
            // the shape.
            let prev = row.checked_sub(1);
            let pick = (0..open)
                .filter(|&k| Some(chains[k].row) == prev && !crosses_outline(chains[k].end, start, &polys))
                .min_by(|&i, &j| (chains[i].end - start).hypot().total_cmp(&(chains[j].end - start).hypot()));
            match pick {
                Some(k) => {
                    let c = &mut chains[k];
                    c.pts.extend(pair);
                    c.bends.extend(bend);
                    (c.end, c.row) = (end, row);
                }
                None => chains.push(Chain { pts: pair.to_vec(), bends: bend.to_vec(), end, row }),
            }
        }
        row += 1;
    }
    let lines: Vec<SubPath> = chains
        .into_iter()
        .filter(|c| c.pts.len() >= 2)
        .map(|c| {
            if curvy_var > 0.0 {
                varied_curves(&c.pts, &c.bends, curviness, curvy_var)
            } else if curvy > 0.0 {
                catmull_rom(&c.pts, false, curvy * 2.0)
            } else {
                SubPath::polyline(&c.pts, false)
            }
        })
        .collect();
    if lines.is_empty() {
        return PathData::default();
    }
    let mut center = PathData::new(lines);
    center.transform(to_local);
    let stroke = kurbo::Stroke::new(width).with_join(kurbo::Join::Round).with_caps(kurbo::Cap::Round);
    let outline = kurbo::stroke(center.to_bezpath(), &stroke, &kurbo::StrokeOpts::default(), 0.05);
    PathData::from_bezpath(&outline)
}

/// A scribble line through `pts` whose curviness at each point is `curviness` percent plus
/// `variation` percent times that point's `bends` noise (in -1..1), kept within 0 to 100 percent.
fn varied_curves(pts: &[Point], bends: &[f64], curviness: f64, variation: f64) -> SubPath {
    // A tension of 6 makes each handle the whole Catmull-Rom tangent; each point then scales its
    // own to the tension `catmull_rom` takes for that curviness (curviness / 100 × 2).
    let mut line = catmull_rom(pts, false, 6.0);
    for (a, bend) in line.anchors.iter_mut().zip(bends) {
        let k = (curviness + variation * bend).clamp(0.0, 100.0) / 300.0;
        a.h_in = a.p + (a.h_in - a.p) * k;
        a.h_out = a.p + (a.h_out - a.p) * k;
    }
    line
}