tests_place::a_file_placed_while_idle_follows_its_changes failed at
random in CI (twice on 2026-10-11): while the link scan ran on its
worker thread, the test's clock moved on by whole simulated seconds per
5 ms of real time, so on a busy machine the 10 simulated seconds ran out
before the scan had read the changed file. The clock now waits for the
scan (up to 20 real seconds).
The font menu's script filter offered Japanese and Latin only, so Thai
fonts had to be found by name among every installed family. It now has
Thai too: the families whose character map has Thai. Latin lists the
families with neither Japanese nor Thai.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An agent driving VectorCraft over the confined MCP server had no way to
see which files it was given, so it guessed names. `file.list {path}`
lists a folder's files (with their sizes) and folders by name, held to
the automation read root like every read; links are listed as links and
not followed. At most 5000 entries, with `truncated` saying when there
were more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An agent's build over MCP left one undo step per batch step (about 280
for one job). `command_batch` takes `atomic: true` (and an optional
`label` naming the step) to make the whole batch one undo step. It runs
the batch in an undo group, opened and closed by the new commands
`edit.undoGroup.begin {label?}` and `edit.undoGroup.end {cancel?}`, so
every backend (headless or the connected app) supports it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Anchor Point tool drags any segment of a selected blend's spine into
a curve, straight ones too, and Direct Selection reshapes a curved spine
segment as it does a path's (a straight one it leaves, as on paths). Both
run the new `object.blend.spine.reshapeSegment`, which bends the segment
with the same math as `path.reshapeSegment`, now shared as
`SubPath::bend_segment`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only the Mesh tool drew a gradient mesh's grid, so with the Selection
or Direct Selection tool a selected mesh showed no outline and no
points, and its points couldn't be seen to be clicked. The selection
highlight now draws a gradient mesh's lines and points, as it already
did for mesh envelopes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
winit 0.30 delivers no file drops on native Wayland. The new Linux Display
Server preference (Automatic / X11 (XWayland), shown on Linux only, read at
startup) has winit open the window on X11 when the session is Wayland,
DISPLAY is set and the X11 libraries winit loads are installed (ldconfig
check ported from PhotoCraft); otherwise the window opens on Wayland and
the log says why. README, development notes, parity docs, ROADMAP and the
complete catalogs updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Object › Path › Offset Path (and `ui.menuDialog` for it) opens on the
offset, joins and miter limit of the last time OK was pressed, as in
Illustrator, instead of 10 pt and Miter every time. The values are kept
with the rest of the remembered dialog options.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect › Distort & Transform › Zig Zag… lays out its options the way
Illustrator's dialog does: Size and Ridges per segment each have a
slider beside their field, Relative / Absolute are radio buttons under
Size, and Points offers Smooth and Corner as radio buttons instead of a
dropdown. The label reads "Ridges per segment".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A corner is now any anchor that isn't smooth where two sides meet at an
angle, straight or curved, as in Illustrator. The cut meets each side at
its setback measured along the curve, leaves both sides along their
tangents there, and each curved side is trimmed to what the cuts at its
ends leave of it. The largest radius is still the one taking the cut
halfway along the shorter side, measured along the curve. Corners
between straight sides draw exactly as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Artboard tool and the Artboards panel only ever had one artboard
selected, so Shift-clicking another didn't add it. As in Illustrator:
- Artboard tool: Shift-click adds an artboard to the selection (it
becomes active) or takes one out; a plain click on a selected one keeps
the selection, so a drag moves them all (Alt copies them all, the
copies becoming the selection), and Delete removes them all, one
artboard always staying. The other selected artboards show dashed
bounds; `selected` is a tool option.
- Artboards panel: with the Artboard tool, Shift- or Ctrl/Cmd-click on a
row adds or removes it, every selected row is highlighted, and Delete
Artboard removes them all.
- `artboard.move` and `artboard.delete` take `indices` besides `index`:
several artboards in one undo step, each with its art (an object moved
once where artboards overlap).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On main, cargo xtask wasm printed two dead-code warnings in
vectorcraft-ui-egui, and this clippy run reported the same two as
errors:
cargo clippy --target wasm32-unknown-unknown -p vectorcraft-web -- -D warnings
ask_update_changed (dialogs/missing_links.rs) is called only from
tick_link_updates, and is_c_locale (i18n/mod.rs) is called only from
detect_system_lang. Both callers are compiled only for native targets.
Each function now has the same #[cfg(not(target_arch = "wasm32"))]
attribute as its caller. Native builds compile both functions as
before.
Icons are drawn in the theme's colour. The Selection tool's filled arrow
therefore came out light in the dark themes and the Direct Selection
tool's hollow one dark, so they looked swapped to anyone who knows the
black Selection and white Direct Selection arrows (reported by a user).
Both arrows now paint a fill in a fixed colour (black, white;
dc-arrow-fill.svg, original) under their outline in the theme's colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ••• button at the bottom of the toolbar no longer opens All Tools as a
centred dialog. It opens the All Tools drawer beside the toolbar, next to the
button. Escape or a click outside closes it; a click in the toolbar doesn't.
Tools that are already in the toolbar show dimmed in the drawer.
While the drawer is open the toolbar can be edited, as the public
documentation describes:
- drag a tool from the drawer onto a toolbar button's top or bottom edge
(left or right edge in two columns) to put it in its own slot there;
- drag it onto a button's middle to add it to that button's group;
- drag a toolbar button into the drawer to take its tool out;
- drag a toolbar button to another place in the toolbar to move its tool.
A line or outline shows where the tool will go, and the dragged tool follows
the pointer. While the drawer is closed the toolbar can't be edited.
The Basic and Advanced toolbars each keep their own edits in
UiState::toolbar_edits, which is saved with the preferences. It is serde
default, so older preferences still load, and a hand-edited file is cleaned
up when it loads. An edit that brings back the default toolbar clears the
saved edits. New UI commands toolbar.addTool {tool, slot?, place?},
toolbar.removeTool {tool, group?}, toolbar.reset and
window.editToolbar {open?} let MCP and the control channel make the same
edits. The drawer also has a Reset button.
The drawer moved from dialogs/all_tools.rs into the new edit_toolbar.rs. It
is tested with headless egui frame tests driven by pointer events (placement,
Escape, click outside, dimming, drag and drop in each direction, the locked
toolbar), along with command, persistence and drop-zone tests. The three new
command labels are translated in every complete catalog, and the error
messages reuse existing translated templates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A browser's Copy Image puts the picture on the clipboard with text next
to it. Paste already took the picture when that text was only the
image's address (#597), but some browsers (seen on Fedora with KDE) put
the image's HTML there instead, `<img src="…" class="…" style="…">`,
which isn't an address, so the markup was pasted as type.
names_a_picture also takes markup whose only content is <img> elements
(no text outside its tags) as naming the picture, and Paste then reads
the bitmap. Markup with words in it, and an address alone, still paste
as text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Fill/Stroke proxy stayed 36 pt and the Color, Gradient and None
buttons 7.5 pt in both toolbar layouts, so in two columns they sat small
in a wide strip and were hard to hit (in one column too). The proxy is
now 54 pt in two columns, the three buttons 11 pt in one column and
17 pt in two, and in two columns Draw Normal, Draw Behind and Draw
Inside sit side by side, each setting its mode (view.drawMode {mode}),
as Illustrator's two-column toolbar shows them; one column keeps the
button that cycles them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A path with all its anchors selected is stored whole (no partial entry), so
pressing one of its anchors looked unselected and replaced the selection with
that anchor alone; the drag then moved just it. Now an anchor of a path
selected whole counts as selected: the press keeps the selection and the drag
moves every anchor. Shift-press still deselects that one anchor.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The second half of #966. With Proportional Metrics on, a vertical segment is
also shaped top to bottom, with and without `vpal`: the difference gives
each glyph's change of advance down the column and its x and y placement.
An upright glyph (not tate-chu-yoko) in a font with vertical metrics takes
them on top of its cell, so it moves with its shorter cell; a font without
vertical metrics keeps `upright_cell`'s cell, and with the switch off
nothing is shaped twice and the column is as before.
As in horizontal type, Line-end Punctuation Half Width takes nothing more
off the punctuation `vpal` re-spaced and trims the punctuation it leaves
full height as before. Docs: mcp.md, and Proportional Metrics leaves the
missing lists in gaps.md, type-parity.md and target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The crash: rfd's blocking dialog ran -[NSSavePanel runModal] inside
winit's event handler; when a resize of the panel ends, AppKit runs the
closures winit queued meanwhile, and winit's re-entrancy panic fires
inside an Objective-C block, where it can't unwind, so the app aborts.
As PhotoCraft (#673) and PdfCraft (#145) ship it:
- macOS: picks::ask shows an rfd::AsyncFileDialog as a sheet on the
window (beginSheetModalForWindow returns at once); a waiter thread
sends the paths and wakes the window. A pick asked outside an entry is
refused and logged instead of running a modal. Linux keeps its thread
(#592) and now also wakes the window; Windows is unchanged.
- Nine paths that asked outside an entry now run as entries: Load
Profile, Swatches and Graphic Styles Other Library, the shortcut
editor's Import and Export, and the presets dialogs' Export.
- While a dialog is open: the macOS menu bar is inert except Hide, Hide
Others and Minimize; Quit, Close, Close All and the close button are
refused; Finder/Dock opens and the IME discard wait; another dialog
is refused with a status message. The answer re-activates the
document that asked (by uid) and Save Changes finds its document by
uid; a frame guard clears a stale picks entry after a recovered panic.
- ui.inspect reports fileDialog.
Squashed onto current main by the maintainer (with main's automation
sandbox wrappers and font-name menus kept).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The paragraph alignment shortcuts were missing. Cmd/Ctrl+Shift+L, C and
R align the selected type's paragraphs left, centred and right, J
justifies them with the last line aligned left and F justifies all
lines; while the Type tool edits text they act on the paragraphs its
selection touches, through the Paragraph panel's own path. They are UI
commands (type.alignLeft, …), listed in Keyboard Shortcuts, and enabled
while type is selected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The name was placed at the top-left corner of the artboard's bounding box
on screen, which a rotated view (Rotate View) turns away from the
artboard's own corner, so the name floated off beside it. It now sits
above the artboard's top-left corner as the view maps it, no wider than
the artboard's on-screen width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
object.align with neither horizontal nor vertical returned success
and moved nothing. The command palette, and a key bound to it in
Keyboard Shortcuts, run it with no params. It now returns
"give horizontal or vertical", as object.distribute already did.
An action recorded while Align ran from the palette or a bound key
contains an object.align step with no params. Playing that action now
fails at that step, and command.batch rolls back the whole action.
Values outside a parameter's choices were read as another choice or
ignored. Align ignored an unknown horizontal or vertical and aligned
to the selection for an unknown to value. Distribute read an unknown
direction as center. Distribute Spacing and Shear read any axis other
than "vertical" as horizontal, and Reflect read any axis other than
"horizontal" or a number as vertical. A bounds or to value that was
not a string fell back to the default, and a spacing that was not a
number gave automatic spacing. The commands now return an error that
names such a value, before they move anything or record an undo
step. When a to, bounds, axis or spacing value is missing or null,
the command uses the parameter's default: Distribute Spacing without
an axis spaces the objects horizontally.
The run_command description and docs/mcp.md showed object.align with
an align param it does not have; they now use horizontal. The new
status-bar messages have rows in the de, es, fr, it, ja, ru and uk
catalogs.
Docs: docs/mcp.md, docs/target-app-parity.md.
Align to Artboard aligned the selection to the artboard under its
center, or to the first artboard when no artboard was under the
center. A press with a selection tool inside an artboard makes that
artboard the active one (#693). With the Selection tool, a
Shift-click on an empty spot inside an artboard also makes it active
and keeps the selection. Align to Artboard did not use the active
artboard.
object.align takes artboard, a 0-based artboard index, and uses it
when its to param is "artboard". The app passes its active artboard,
the one the Artboards panel highlights, to each object.align it runs
that names none, as it does for Paste in Place, Paste in Front, Paste
in Back (#693) and Select › All on Active Artboard (#1006). MCP calls
in remote mode also get it. Without artboard (headless MCP and the
CLI), or with an index the document doesn't have, object.align aligns
to the artboard under the center of the selection, or to the first
artboard when no artboard is under the center.
command.batch takes artboard too, and the app passes it the active
artboard. The batch passes it on to each step of these five commands
that names none, when the step runs. When the document a step runs in
has no artboard at that index (for example, after an earlier step
deleted the active artboard when it was the last one), the step gets
that document's last artboard. A step in a document that an earlier
step opened, created or switched to gets the same index, not that
document's own active artboard.
With Align to Selection, one selected object aligned from the Align
panel, the Control bar or the Properties panel is aligned to the
active artboard too, unless it is the key object.
Recorded actions leave out the artboard that the app passes to these
commands and to the batch. The Actions panel plays an action as a
batch. Its Align to Artboard, All on Active Artboard and in-place
paste steps that name no artboard use the artboard that is active
when it plays, and the default Center on Artboard action now centers
on the active artboard. In-place paste steps recorded since #693 and
before this change still paste onto the artboard that was active when
they were recorded.
Tests cover object.align with and without artboard on three artboards;
a Shift-click that makes an artboard active, after which Align to
Artboard aligns to that artboard but keeps an artboard the call names;
a batch that passes its artboard to each step when the step runs,
after a step deletes the last artboard and in a new document; recorded
actions that leave the artboard out; and recorded Align to Artboard
and Paste in Place steps and the default Center on Artboard action,
which play on the artboard that is active when they play.
Docs: docs/mcp.md (Align to Artboard), docs/target-app-parity.md.
Selecting two objects, clicking one to make it the key object and then
Shift-clicking the other left the remaining object as the key. The
canvas still drew that object with the thick key-object outline. The
Align panel aligned the object to itself, so the object did not move.
The key is now cleared after any change that leaves no other selected
object outside it, such as a Shift-click, or hiding or deleting the
other object's row in the Layers panel. On a single selected object,
or on a group selected with only its own members, select.key sets no
key.
With one object selected and Align to Key Object chosen, the Align
panel, the Control bar and the Properties panel ran object.align with
to: "key", which fails with "no key object" when the selection has no
key. All three now align a single selected object to the artboard
whatever Align To is set to.
Docs: docs/target-app-parity.md.
With a document open, the desktop app ran File › Place on a swatch or
graphic style library, a Libraries panel file, a presets file or a
plug-in dropped on it. A desktop drop has no position, and without one
the app opened only documents and ran File › Place on every other file.
On the web, the app also ran File › Place on these files when they were
dropped on the canvas. File › Place can't read them, and the drop
failed with "Couldn't place X: ... not a format VectorCraft reads".
VectorcraftApp::drop_target now returns Open for these files, with or
without a drop position, and they open as File › Open opens them:
plug-ins are installed, presets are imported, swatch and graphic style
libraries open in the library panel, and a Libraries panel file is
added to the Libraries panel as a new library. A dropped library,
presets file or plug-in that has a path is added to Open Recent Files
when it opens, as File › Open adds it. io::opens_as returns the kind of
each of these files from its extension, and drop_target and
io::open_bytes both call it. The rules from #472 still apply to
documents, pictures and text. On the web the browser gives no file name
before the drop, so the app still outlines the canvas while such a file
is dragged over it.
Tests: drop_target returns Open for each of the eleven extensions, with
no position and with a position on the canvas. A .gpl dropped through
the desktop drop path loads in the library panel and is added to Open
Recent Files, and a .vclibrary dropped the same way becomes a new
library in the Libraries panel.
Docs: docs/control-protocol.md (file.place), docs/development.md
(Drag-and-drop), docs/target-app-parity.md (Evidence, UI).
The theme leaves egui's own checkbox without an outline while inactive,
so an unchecked box was invisible and a checked one a bare tick. #1080
moved Preferences to widgets::check; the remaining ui.checkbox uses
follow: the Properties panel's Snap to Point, Snap to Grid and Scale
Strokes & Effects, Revolve's Keep visible surfaces and Shading, Save
options, Export for Screens, the Variables dialog and plug-in forms.
widgets::check_name shows a document's name (an artboard's, an asset's)
as it is, never translated; the check and radio rows translate their
labels in the public functions, so choice_row draws text as given.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The new id errors reuse messages the catalogs already translate
(`ids` must be an array of object ids, object ids are non-negative
integers, no such layer or object), so complete_languages_translate_every_message
keeps passing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A malformed id gets the existing object-id message, and a listed anchor
that is not a corner the existing "give corners of the path" one, so
only the malformed-list message is new (translated in every catalog
that covers messages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
parse_freeform and paint.freeform.addLine share point_indices, which also
keeps addLine from wrapping a huge index round on 32-bit targets (wasm).
The new messages are in the catalogs that translate every message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The drawer width is worked out from the tool cell, and the new test no
longer sits between the existing test and its doc comment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
These Object commands edited the document even when nothing changed, so
the call recorded an undo step, emptied Redo and marked the document
modified:
- object.align, object.distributeSpacing and object.distribute (three
or more objects) when no object moves. With one object selected,
Object › Align aligns it to its own bounds, so it recorded a step
every time. Calls on objects that were already aligned or evenly
spaced also recorded a step, including objects that an earlier Align
or Distribute left a rounding error away from the position the next
call computes.
- Move, Rotate, Scale, Shear, Transform and Nudge by an identity
transform without a copy, Transform Again after one, Set Bounds with
the current position and size, and a Selection tool drag that ends
where it started.
- Nudge by 0 with anchors direct-selected or with only ruler guides
selected, and Transform with nothing selected or with ids that name
no object, with or without a copy.
- Bring to Front and Bring Forward on objects already in front, Send to
Back and Send Backward on objects already at the back, and Send to
Current Layer on objects already on top of the current layer.
- Ungroup, Release Compound Path and Release Clipping Mask with none of
their objects selected, and Expand Shape with no live shape selected.
- Lock with every selected object already locked, Hide with every one
already hidden, Unlock All with nothing locked and Show All with
nothing hidden.
- object.setProps with the values the objects already have, or with no
object.
- object.setLiveShape with the values the shape already has: a
polygon's sides, angle, radius or equal sides, or a side length that
gives exactly its current radius; an ellipse's pie, including Invert
Pie on a whole ellipse; and a corner radius or kind that the corners
already have.
These commands now return without editing the document, and Align and
Distribute count a move of 1e-9 pt or less on both axes as none. Such a
call records no undo step, keeps the step to redo and leaves the
document unmodified. In these cases Ungroup no longer resets the
selection, and Release Compound Path, Unlock All and Show All no longer
empty it. A Transform with a copy of no object keeps the selection.
Lock and Hide still deselect the objects. A Nudge by 0 no longer
expands a live shape whose anchors are direct-selected. The replies
have the same form as before. An identity transform still sets what
Transform Again repeats. The journal still records each call, so the
Actions panel records it as before.
When every value given to Set Bounds is the current one, it now applies
the identity transform instead of the transform computed from those
values, which can differ from the identity by a rounding error on a
rotated object or with Use Preview Bounds.
When a drag comes back to its start, the identity preview no longer
edits the document. Session::preview now advances the revision when it
undoes the previous preview, so views redraw that drag.
The undo and redo row of docs/mcp.md now notes that many calls that
change nothing record no undo step, so undo after one undoes the step
before it.
A character attribute (Character panel menu with the East Asian options;
`text.setFormat` / `text.setRangeStyle {proportionalMetrics}`), saved only
when on. In horizontal type it applies `palt`; vertical type sets as before
until the vertical shaping change (`vpal`) follows.
Line-end Punctuation Half Width takes nothing more off the punctuation
`palt` re-spaced (the flush opening bracket, consecutive punctuation, the
line-end half width): the segment is shaped once more without `palt`, and
the glyphs whose advance differs are marked. Punctuation the font leaves
full width is trimmed as before. SVG writes `"palt" 1` with the
character's other features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After scaling 12 pt type 2x, the Character panel still showed 12 pt and
typing 10 pt gave 20 pt type. Character controls and text commands now
work in document points: the size, leading and baseline shift shown and
set are the stored ones times the text's scale along its em height, and
horizontal scale includes the ratio of the transformed em axes. Rotation,
reflection and shear stay in the transform, so text remains editable.
Groups' text counts, keyboard increments use the same units, Shrink
Text to Fit works in document tenths, and a collapsed transform rejects
dimensional edits without touching the document.
text.getRange takes effective: true for the document-space values.
A .ai in PostScript form went only to the PostScript interpreter, which
stopped on the first operator its missing prolog would define
(`Adobe_packedarray`, `Lb`, `Np`): files from Rhino and other CAD apps name
the procsets without including them.
- Such a program is its own editing data: when it has layers
(`%AI5_BeginLayer`) and no private data, the editing-data reader reads it,
compared with the page when the program runs, from the layers alone when
it can't be run. If the layers can't be read either, the error says why.
- The reader takes the legacy ten-operand `Lb`, ignores flatness `i`, and
uses the bounding box as the page when nothing else says where it is.
- Tests on synthetic files; fuzz fixture and hostile-program layers added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
# docs/file-format-parity.md
# docs/gaps.md
- Guides on a hidden or locked layer leave the selection (Selection::prune,
run after every edit and selection change), their Layers rows neither
select nor drag them, and guide.move / guide.remove / guide.setLayer
refuse them; guide.setLayer refuses a locked target layer, as dragged
rows are refused there.
- A new guide goes where new art goes (the current layer, else the top
shown and unlocked one; refused when there is none), so it never lands
on a hidden layer and vanishes.
- Layer commands keep guides with their layers: Duplicate (and Alt-drag
copies of rows) copy a layer's guides onto the copy, Merge Selected and
Flatten Artwork put the merged layers' guides on the merged layer and
Flatten discards a hidden layer's. One shared doc predicate for "the
layer a guide is on"; the deleted-layer cleanup moves into the doc.
- Tests: engine tests for the above and their undo, a doc check that an
old guide reads with no layer and none is written, and a headless
Layers panel test of guide rows (select, drag to another layer, locked).
- Translations for the new message; docs and a ROADMAP progress line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guide rows in the Layers panel drag (the selected guides when the row is
one of them) onto any row of another layer, which lights up, and go to
that layer in one undo step (guide.setLayer takes indexes). Guides on no
layer, from files saved before guides had layers, go on the top visible,
unlocked layer when a document opens or is reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
A ruler guide goes on the current layer (guide.add {layer}), shows,
hides, locks and is deleted with its layer, is listed in the Layers panel
as a row that selects it, and moves to another layer (guide.setLayer).
Guides on a hidden layer neither show nor snap; those on a locked layer
can't be picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
bflatastic