Choosing a perspective tool shows the grid, but the canvas also re-selected the tool after a
Cmd-drag with the borrowed Selection tool, so a grid hidden with the tool chosen came back after
any Cmd-drag. `Session::switch_tool` (and the app's `restore_tool`) switch without choosing; the
temporary-tool return uses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid was drawn whenever its `visible` flag was set or a perspective
tool was active, and choosing the Perspective Grid tool (Shift+P) didn't set
the flag. So with the tool chosen, View > Perspective Grid > Hide Grid
(perspective.grid.show) turned the hidden flag on instead of off and the
grid stayed on screen however it was toggled.
Choosing a perspective tool now shows the grid (sets `visible`, view state,
no undo step), and the grid, its widget and the Perspective Grid tool's
handles are drawn only while it is visible. Hide Grid hides it with the
tool still chosen; choosing the tool again shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a tool was busy (a drag in progress) the shortcut handler passed
only Up and Down to it, so the Rectangular and Polar Grid tools never
saw Left/Right, which add and remove columns (radial dividers). All four
arrows now go to the busy tool; the tools that use arrows for something
else (Gradient, Perspective Selection) ignore them while busy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Parity: Object › Path › Remove Anchor Points now runs the new command (`path.removeAnchors`,
the menu's feature name) instead of `path.deleteAnchors`, which deleted the anchors with their
segments and opened closed paths; that stays the Delete key's command ("Delete Anchor Points",
off the menu). No second "Smart" item.
- Geometry: the refit moves to `vectorcraft_pathops::remove_anchor` on the existing least-squares
fitter (fixed end tangents, a golden-section search for where the curve passes the removed
point) instead of a ~1,000-candidate grid search in geom (about 4 ms per anchor, now well under
0.1 ms). Two straight sides stay one straight side (a rectangle loses a corner and becomes a
triangle), as Illustrator does; non-finite input leaves the handles alone.
- The Delete Anchor Point tool (`path.removeAnchor`) uses the same function, replacing its
heuristic handle stretch; the explicit id/anchor and `fit` params of the new command are dropped
as duplicates of it. The command is enabled by direct-selected anchors (`has_anchors`), not a
UI override.
- The Control bar shows an icon button (the Delete Anchor Point icon, tooltip "Remove Anchor
Points") instead of a 204 pt text button; the labels reuse the translated "Remove Anchor
Points"; zh-hant gains "Delete Anchor Points". The Pen test that pinned Alt-click as plain Pen
(Illustrator's Alt over an anchor is Convert Anchor Point) is dropped.
- Tests for the refit, closed paths, straight sides and bad input; docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
path.smartRemoveAnchor stays. Object › Path, the Control bar, the contextual task bar, Properties, and the canvas context menu run it on direct-selected anchors. The Pen no longer uses Alt/Option for this, so that key stays free for Convert Anchor Point.
- A dragged handle no longer snaps to its own path's bounds and centre, which move with the
handle; the path's anchors are point and alignment targets instead.
- Shift steps 45° from the Constrain Angle preference, like the cut and gradient tools.
- snap_draw and snap_handle share one pixel/grid/smart-guides switch.
- A test that a smooth anchor's opposite handle turns with a Shift-dragged handle and that Alt
still breaks it, and the tools' module docs (both from #338).
Co-authored-by: theironchef <6278036+theironchef@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dragging a direction handle with Direct Selection or the Anchor Point tool
sent the pointer position straight to path.setHandle: Shift did nothing and
the handle never snapped, while the Pen already constrains the handles it
pulls out.
guides::snap_handle places a dragged handle: with Shift at a multiple of
45° from its anchor (the Pen's constraint, keeping the dragged length),
otherwise snapped as a drawn point is (smart guides, the grid, pixels).
Both tools use it and show the smart guides while the handle moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rotate, Scale, Move and the other form dialogs opened with no field
focused, so a typed value went nowhere and Enter applied the default (a
Rotate by 0 degrees). The frame a dialog opens on (after the window's
measuring frame), its first text or number field takes the keyboard
focus with its text selected, so typing replaces it and Enter applies
it, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Use the paint owner, as a dropped swatch does. The Asset Export panel's drop zone uses
the shared art_drop too. Note the new drag and drop in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Art dragged off the canvas and released over the Swatches panel becomes
a pattern swatch of a copy of it (object.pattern.make without entering
pattern editing; the art stays), and over the Brushes panel an Art brush
(brush.new, as the panel's New Brush button makes). A brush dragged out
of the Brushes panel (PanelDrag::Brush, with a preview chip) is applied
to the path it is dropped on (brush.apply). The art drop zone helper
moves to widgets, shared with the Symbols panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.move with copy and artboard.duplicate now make the copy with one helper: a
new id that can't overflow and a name of its own (`<name> copy`, then `<name> copy 2`…,
so two copies of one artboard no longer share a name). `moved` lists the copies a copy
moved rather than the originals it left. Test it with and without moveArt, and note
Alt-drag in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Alt-dragging an artboard moved it like a plain drag. artboard.move now
takes copy: it leaves the artboard (and the art it carries) where it
is and moves a copy, named "<name> copy", with copies of that art. The
Artboard tool previews it while Alt is held, as "Duplicate Artboard"
(Alt pressed or released mid-drag switches between copy and move),
and makes the copy the active artboard, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As in Illustrator, double-clicking an artboard's number goes to it (fits it in the
window) and double-clicking the name renames it. A row's Options button chooses the
Artboard tool on that row's artboard, clicking a row moves the Artboard tool to it
while it is chosen, and an artboard clicked with the Artboard tool becomes the active
one the panel highlights. Note it in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel kept its own selection (a pstate nothing else read), so a
click only highlighted the row: the status bar navigator, Fit Artboard
in Window and Actual Size stayed on the previous artboard. The panel's
selection is now the view's active artboard (View::artboard): a click,
Move Up/Down and New Artboard set it, and the highlight follows the
navigator, per document, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator's Alt-click on a layer's eye hides the other layers and, once they are
hidden, shows every layer again; the lock column does the same with Lock Others and
Unlock All Layers. Reuse the panel menu's commands (one undo step each, named as the
menu items) instead of toggling the row's siblings, so a sublayer's or an object's row
stands for its top-level layer. Document it in the ROADMAP and docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In the Layers panel an Alt-click on an eye or lock now applies to the
other items beside that row (the other layers for a layer) in one
object.setProps step: it hides or locks them while any of them is shown
or unlocked, else shows or unlocks them all, as in the reference app. A
plain click still toggles only that row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine kept its own copy of Document::next_layer_name after #353; the
document's now counts sublayers too, so the engine uses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new sublayer was named "Layer {node_count}", counting every object, so
an empty document's first sublayer was "Layer 1" like its parent and a
document with five objects got "Layer 6". Top-level layers counted only
top-level names and could repeat a sublayer's. Document::next_layer_name
now counts every layer, sublayers included, and skips any layer's name;
layer.newSublayer uses it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Line Segment family (Arc, Spiral, Rectangular Grid, Polar Grid)
ignored Space while drawing, as the shape tools did before #302. Both
tools now share shape::space_moves. A headless canvas test presses Space
for real in the middle of a Rectangle and a Pen drag: the shape and the
anchor move and the view doesn't pan. Adds the ROADMAP entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shape tools (Rectangle, Rounded Rectangle, Ellipse, Polygon, Star,
Line Segment) ignored Space during a drag. While Space is held once the
drag has begun, the drag's start now moves with the pointer, so the
shape being drawn moves at its current size; letting go of Space resumes
sizing from there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Pen's Auto Add/Delete had its own copy of the anchor and segment hit
tests and of the path.insertAnchor / path.removeAnchor actions the Add
and Delete Anchor Point tools build. draw2 now exposes anchor_in /
segment_in (the hit tests over a given set of paths) and insert_anchor /
remove_anchor, which both tools use. Adds the ROADMAP entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Between paths, the Pen now adds an anchor where a click lands on a
segment of a selected path and deletes the anchor a click lands on,
with the add and delete cursors while hovering, as in the reference
app. The ends of a selected open path still continue it. Shift held,
or General > Disable Auto Add/Delete (a stored preference nothing read
until now, passed to tools as ToolContext::auto_add_delete), starts a
new path instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While drawing, a click on the last anchor appended a second anchor at
the same spot, keeping the old outgoing handle, so the path got a
zero-length curve that showed as a spike. Now a click there retracts
the anchor's outgoing handle (the next segment leaves it as a corner)
and a drag pulls a new outgoing handle out on its own, with a convert
cursor (^) over it, as in the reference app. A one-anchor path no
longer closes on itself when its anchor is clicked again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Pen ignored Space during a drag, so the anchor being placed stayed
where the button went down and its handles swung round it. Space held
now moves the anchor, handles and all, as far as the pointer moves
(the handle Alt kept moves along too); releasing Space goes back to
shaping the handles round the new place, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressing Alt while dragging out a smooth point set its incoming handle to
the anchor itself, so the segment just shaped turned straight. The Pen
now remembers the incoming handle it last previewed and keeps it while
Alt is held, so only the outgoing handle follows the pointer: a corner
with curves on both sides, as in the reference app. Alt held from the
start of the drag still gives an outgoing handle only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The resize snap skipped a bounding box standing at an angle. It now works
on the page whatever the angle: a corner handle takes the target's x, y or
both, and a side handle (or a proportional corner) slides along its own
direction until the handle or an end of its side is on a target. A target
the side runs almost along is skipped, so the handle stays near the pointer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013j16ENkbsNYyHSCDhxYkYR
Dragging a bounding-box handle with the Selection or Free Transform tool
now lands the edges it moves on the edges and centres of the other objects
and artboards, with the guide line, as a move already did. A proportional
scale snaps the closer axis only; a turned bounding box doesn't snap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013j16ENkbsNYyHSCDhxYkYR
Rows at every depth highlight on click (Shift range, Ctrl toggle) and make
their layer current; selection squares select a row's art and drag the
selection to another row; eye and lock on every row with drag-down-the-column
in one undo step and Ctrl-click for Outline; Alt-click triangles; drag and drop
rows above, below or into layers and groups with a drop line (Alt copies);
Delete key; the full panel menu, Layer Options and Panel Options dialogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Art in a sublayer is now selected as objects (clicks, marquee, Select All, the
Select menu), sublayers select in their own colour, and hidden, locked or
template sublayers block clicks. Layer Options gain Preview (per-layer outline)
and Dim Images. New and fixed layer.* commands for the Layers panel: setCurrent
and highlight (rows at any depth), selectAll, move (reparent with cycle and
nesting checks, Alt copies), delete/duplicate rows, merge, flatten, collect,
release to layers, reverse, template, hide/outline/lock others and their
show/preview/unlock all, locate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The » at the top of the right dock was only painted. Its header strip is
now a click target (hover highlight, "Collapse to Icons" tooltip) that
runs the new window.collapseDock UI command: the Properties | Layers |
Libraries group hides and its three panels become icons at the top of
the icon column, under a « strip ("Expand Panels") that expands them
again. While collapsed, those icons and window.panel pop the panel out
next to the column like the other icon panels (dock-width flyout, Layers
and Properties given a height that keeps them on screen); expanding with
one popped out shows its tab.
The flyout now follows the icon column's real left edge (recorded each
frame) instead of assuming a 300-point dock, so it also tracks a resized
or collapsed dock. The collapsed state is kept with the UI preferences
and in user workspaces; the built-in workspaces expand the dock.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Upright glyphs in vertical type advanced one em (or their horizontal
advance, if wider) and turned about a fixed point 0.38 em above the
baseline. Fonts that carry vertical metrics now place them as they ask:
- `FontFace::vertical_glyph`: a glyph's advance down the column (`vmtx`)
and the height of its vertical origin (`VORG`, else the glyph's top
plus its top side bearing, as in TrueType fonts); `None` without
`vhea`/`vmtx` or with values outside a few ems.
`FontFace::ideographic_centre`: the em box centre from an ideograph's
cell, else 0.38.
- The layout advances an upright glyph by its vertical advance and hangs
it from its vertical origin; tate-chu-yoko blocks and point type's
anchor use the font's em box centre. Fonts without vertical metrics
are laid out exactly as before.
- Hiragino's tables give the values the layout assumed (one em, origin
0.88 em), so Japanese vertical type in it renders pixel for pixel the
same; this is the base for proportional vertical metrics (`vpal`) and
for fonts whose em box sits elsewhere.
- `test_fonts::vertical_font`: Source Sans 3 with `vhea`/`vmtx` (and
optionally `VORG`) built in code, one glyph 1.4 em tall hanging from
1.1 em; tested with and without `VORG`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On hybrid-graphics laptops (an integrated GPU driving the display plus a
discrete one), egui-wgpu's default power preference is HighPerformance, so
VectorCraft rendered on the discrete GPU and its frames were copied to the
display through the integrated one. On an Asus ZenBook with Intel Iris + Arc
the window flickered whenever the mouse moved over it (#306, #305).
The canvas is rasterized on the CPU (vello_cpu) and the GPU only composites
the canvas texture and draws the UI, so the integrated GPU is plenty. The
desktop app now asks wgpu for the power-saving adapter by default.
Single-GPU machines are unaffected.
- Preferences > Performance > Graphics Processor (`gpuPreference`:
powerSaving, the default, or highPerformance), with a note that it
applies after a restart. The app reads it from the saved preferences
before the window opens. WGPU_POWER_PREF still overrides it.
- Help > About and `ui.inspect` (`graphicsAdapter`) name the adapter in
use, and it is logged at startup, for future GPU bug reports.
- Docs (README, docs/development.md) and ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
#249 made the reduced repros of #234 open, but a real file saved by the
reference app (version 30) still fell back to its screen-resolution preview
with "typecheck in `a dictionary`". Running its prolog to the end needed:
- The standard dictionaries (systemdict, userdict, globaldict, statusdict,
errordict, $error) as values in systemdict, so `/globaldict where
{ /globaldict get begin } if` gets a dictionary, not an operator.
SharedFontDirectory names the font directory too. errordict has a
handleerror for prologs that wrap it.
- `dictstack`, `internaldict`, `currentsystemparams` and
`currentuserparams` (with the cache sizes programs `get`), and `cshow`.
- Executable files: `cvx` and `cvlit` set a file's attribute, `xcheck`
reads it, and executing one runs its data as a program, as the prolog
does with `(...) 0 () /SubFileDecode filter cvx exec`.
- SubFileDecode with a count of 0 and an empty end string passes its
whole source through instead of nothing.
- `flushfile` on a filter over the program's data skips that data (the
file's XMP packet). A filter chained from a pending one leaves it
nothing to skip, so the writer's own `VCsrc flushfile` is unchanged.
The interpreter empties its standard dictionaries when it finishes, since
systemdict now holds itself. Both real files tested now import as 15
vector paths in CMYK with no warnings, and round-trip through SVG and PDF
pixel for pixel. The EPS fuzzer exercises the new operators.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The font database made one style per font file, so a variable font
such as Figtree[wght].ttf listed only its default instance (Light).
Faces now also yield their fvar named instances, each a style of the
family named by its subfamily name (the default instance is the face
itself; unnamed or duplicate instances are left out; axes and
instances read are capped). The system font scan reads the fvar table
beside the name table, so installed instances are listed before the
file is loaded and found by name and by PostScript name.
An instance face carries its axis settings: skrifa draws its outlines
and reads its metrics and advances at that location, harfrust shapes
with a ShaperInstance, so layout, the canvas, Create Outlines and hit
testing all use the instance. PDF export embeds it through krilla's
Font::new_variable, SVG @font-face through subsetter's
subset_with_variations: both write a static font of that instance.
Tests build a small variable font in code (test_fonts, via
write-fonts; no font file is committed) and check listing, resolving,
glyphs and advances, PDF and SVG export and damaged fvar/gvar tables;
Bahnschrift and Segoe UI Variable are checked where installed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the in-window menu bar (Windows and Linux) each top-level menu needed
its own click: with File open, moving the pointer onto Edit or Object did
nothing. Now, as on a native menu bar, while one menu is open a moving
pointer that reaches another title opens that menu instead (ported from
PhotoCraft). A pointer resting on a title doesn't switch, and a tall menu
that covers the bar doesn't switch to the title underneath it. The native
macOS menu bar is unchanged.
Also adds a regression test for #292: the Simplify, Offset Path, Move,
Rotate, Split Into Grid and Average dialogs are 366 pt wide in a 1600 pt
window (already fixed by #239).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A live rectangle kept every transform in its `xf`, so a non-uniform scale
(a bounding-box drag, Object > Transform > Scale) stretched the rounded
corners built in untransformed space into elliptical arcs. Scale Corners
off divided the radii by the mean scale, which only compensated uniform
scales.
LiveShape::transform now folds a scale along the rectangle's own sides
(any rotation or reflection, no shear) into w/h and keeps only rotation,
reflection and position in `xf`, so the radii are document lengths and the
path is regenerated with circular corners. Radii scale by the mean scale
(sqrt|det|), which keep_corners undoes for Scale Corners off. Shears and
plain moves keep composing into `xf` as before, so files saved with a
scale in `xf` keep their exact geometry until next scaled or rotated.
A corner-widget drag starts from the radius as drawn (clamped to fit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Save Selection… asks for a name and keeps the selection in the document (saved with
the file, undoable, at most 25) instead of in session memory keyed by the title.
Each saved selection is listed at the bottom of the Select menu and a click selects
its objects again. Edit Selection… opens a dialog with the list to rename or delete
them, applied together on OK as one undo step (select.editSaved takes `edits`).
The menu stub count in the ROADMAP goes from 16 to 15.
A regression test for non-ASCII paths. It saves to a Japanese file name, with
full-width brackets and a middle dot, inside a Japanese folder. It checks the
document's title, reopens the file with its Japanese text, and exports SVG, PNG
and PDF to Japanese names.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A file with several artboards writes, on each page, the art of its
neighbours that reaches the page's box, shifted by its own artboard
spacing. Kept, those copies drew over the art of the page they came from
(a hologram over its card's stripes and title). With several pages, art
wholly outside a page's box now stays with the page it belongs to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brandon Thomas