A click with the Selection tool on a guide selected with objects makes
it the key (select.key {guide}), drawn thicker; a click on it again
cancels it. Align to Key Object is on with one object and a selected
guide and makes the guide the key. object.align lines the objects (or
selected anchors) up on the guide's line and leaves the guide where it
is: a vertical guide sets x only, a horizontal one y. The selection
keeps key_guide beside key, never both; it goes with the guide or the
objects, and follows the guide when earlier guides are deleted.
Distribute Spacing doesn't space from a key guide.
Labelling to a hundred and twenty-eighth left the left ruler unreadable: it
spells a label one character per line, 8.5 pt apart, and at zoom 50 the step is
1/64 with labels 56.25 pt apart while "0.015625" needs 61.5 pt. At zoom 100 it
is "0.0078125" in the same space.
The label ladder stops at a sixteenth, as the report says Illustrator's does,
so zooming in past that leaves the labels where they are and only the ticks
between them grow denser -- down to a hundred and twenty-eighth, which is the
32nds, 64ths and 128ths the report expects to appear unlabelled. Every label is
at most the six characters of "0.0625", which fits the 50 pt the ladder leaves.
Zooming in on an inch ruler stepped through 0.2, 0.1 and 0.05 of an inch:
`Unit::ruler_step` picked from one decimal ladder for every unit, and the
rulers divided whatever it returned by ten. A tenth of an inch is not a mark an
inch ruler carries (#2827).
Below an inch the steps are binary fractions now, 1/2 down to 1/128, and
`Unit::ruler_minor` gives the unlabelled ticks between two labels: an eighth of
the step on an inch ruler, so every tick is a binary fraction of an inch and
they stay about as dense as the tenths elsewhere. An inch and wider keeps the
shared ladder, and the metric units, points, pixels and picas keep their
tenths. Ruler-tick snapping follows the ticks that are drawn, which moves an
inch document's Shift-drag of a guide onto the same grid.
`ruler_label` took its decimals from `(-step.log10()).ceil()`, which writes
1/16 as "0.06" and 1/8 as "0.13" -- wrong values, not just rounded ones. It
uses the fewest decimals that write the step exactly, and drops trailing zeros
as `Unit::number` does, so a sixteenth-inch ruler labels the inch `1` rather
than spelling `1.0000` down six lines of the vertical ruler.
VectorCraft had no Objects on Path. A click with the Objects on Path
tool attaches the selected objects to the path clicked. The tool is in
Edit Toolbar's Modify section and the Blend tool's flyout, and Object ›
Objects on Path › Attach and the context menu with two or more objects
selected choose it. The objects and the path go into an Objects on
Path group with the path at its bottom.
- object.objectsOnPath.attach orders the objects column by column from
left to right and top to bottom in each column. The first one sits
on the path's first anchor, the last one sits on the end of an open
path, and the rest are spread evenly by length; a closed path takes
them all the way round. Each object's attachment point (Pivot, one
of nine, default the center of its bounds without strokes) sits on
the path, and the object is turned to the path there. An object that
was rotated by an angle other than a multiple of 90° is first turned
to the nearest multiple of 90°. Rotate tilts every object by that
many degrees counter-clockwise. Symbol instances are measured by
their art. Guides, compound paths, type, paths without length and
graphs are refused with a reason.
- After every edit the objects go back on the path: editing the path
moves them, an object moved on its own goes back, and objects moved
into or out of the group in the Layers panel join the end of the
path or leave it. Scaling, shearing or reflecting the whole group
keeps each object's scale, shear or reflection, and the objects are
spread evenly along the transformed path again. Undo takes the path
and the objects back in one step, and a copied group stays live on
its own path.
- object.objectsOnPath.options changes Pivot and Rotate, and
object.objectsOnPath.expand leaves a plain group. Both act on the
groups that `ids` names, or on the groups of the selection when
`ids` is not given.
- The native file keeps the group live; SVG, PDF and the other exports
write plain art. The tool highlights the path under the pointer, has
a cursor entry, and Escape during a press cancels the click.
Part of #2545
Docs: docs/mcp.md, docs/target-app-parity.md.
Found while testing crates/doc/src/lib.rs:274 (Unit::named)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Justification… was a disabled stub, and justified
lines stretched word spaces between fixed limits (80% to 150%).
Each paragraph now has Justification options: Word Spacing, Letter Spacing
and Glyph Scaling (Minimum, Desired, Maximum, in percent), Auto Leading and
Single Word Justification. Desired applies to every line; a justified line
fills its measure with word spacing first, then letter spacing, then glyph
scaling, each within its range, and past them its word spaces take the
rest. The Every-line Composer scores lines by that flexibility. Auto
Leading sets the leading of characters whose leading is Auto. A justified
line holding one word is spread between its letters (Full Justify) or
aligned left, centre or right.
The defaults are the documented ones (80/100/133, 0/0/0, 100/100/100, 120,
Full Justify), saved only when they differ. Because the default maximum
word spacing is 133%, justified paragraphs break differently than before;
the Every-line Composer's second pass is now unbounded for justified text
(it used to give up past four times the stretch and fall back to the
Single-line Composer, which the narrower default range would make common),
and lines that can't stretch at all are still refused.
text.setFormat takes wordSpacing, letterSpacing, glyphScaling ([min,
desired, max] or {min?, desired?, max?}), autoLeading and
singleWordJustification; Minimum ≤ Desired ≤ Maximum must hold or nothing
changes. Paragraph styles carry the options (New and Redefine capture
them), and Reset Panel resets them. Justification… opens a dialog
(ui.justification) with Preview; OK is disabled while a row is out of
order. Live SVG text places characters the options move, and a glyph that
Glyph Scaling scales is stretched to its width; PDF uses the glyphs'
transforms. Vertical type isn't glyph scaled; type on a path doesn't use
the options.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2755.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On an edge two artboards share, the artboard to the right of it or below
it holds a point, except at the end of the edge that lies on that
artboard's bottom or right edge, such as where both artboards' bottom
edges meet. There the first artboard holds it, or the last when
topmost. The doc comment and the test comments now say so, and the test
asserts that corner.
Rearrange All Artboards, Select › All on Active Artboard (for objects
with no area), Copy's source artboard for Paste in Place, Align to
Artboard without an index, Crop Image, the Crop Image tool, Place with
`at`, CSS positions and a filter plug-in's artboard decided whether a
point or an object's center is on an artboard with Rect::contains,
which leaves out the right and bottom edges. A line along an artboard's right or
bottom edge was on no artboard: Rearrange left it behind, and All on
Active Artboard did not select it. Document::art_on_artboard counts
art flush with those edges (#890).
They now count the edges as art_on_artboard does, within a millionth
of a point. On an edge two artboards share, the artboard to the right
of it or below it still holds the point. All on Active Artboard
selects a line on a shared edge from either artboard. A press exactly
on a right or bottom edge now picks that artboard, and the Artboard
tool's cursor shows Move there.
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
Object › Graph › Column… was a menu stub, so a graph's columns and bars
were always plain rectangles. The reference app fills them with a graph
design, vertically scaled, uniformly scaled, repeated with a value for
each copy, or stretched at a guide line.
graph.column (Column…) draws the columns, bars or stacked segments and
the legend swatch of the series picked with Group Selection with a
design saved by Object › Graph › Design. Vertically Scaled stretches the
design to each column's length at the column's width. Uniformly Scaled
scales it both ways to that length and centers it on the column.
Repeating stacks a copy for each Each Design Represents value out from
the zero line, and For Fractions chops the last copy at the value or
scales it down. Sliding keeps the part above the design's horizontal
guide line in proportion and stretches the part below. The design and
its options are saved with the graph, and the graph follows the design
when it is renamed or deleted. Columns drawn with a design cast no drop
shadow.
A marker or legend design made of one path is now drawn in a group of
its own. Painting a series with Group Selection then leaves the design's
paint alone, as it already did for designs of several objects.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object > Live Paint > Gap Options was a stub, and paint leaked through
any gap between the paths of a Live Paint group. The reference app's
Gap Options stop paint at small gaps, close them with unpainted paths
and preview them on the canvas.
livePaint.gapOptions (Gap Options) sets a group's options: detect (Gap
Detection), size (small 3 pt, medium 6 pt, large 12 pt, or a custom
size over 0 up to 72 pt), color (the Gap Preview Color, #rrggbb or a
layer color's name) and closeGaps, which adds an unpainted path across
each gap to the group's paths. A gap runs from a loose end of a path
to the nearest point of any path within the size, unless the paths
already join the two close by. With detection on, the faces are made
again as if a line closed each gap, and each face or edge keeps the
look of the old one it lies in or on. The options are stored on the
group, so they are saved, copied and undone with it, and Expand drops
them. Merge keeps the bottom group's options when its Gap Detection is
on, or else turns Gap Detection on with Small when another merged
group has it on. When Gap Detection is off in every merged group,
Merge keeps it off. livePaint.info lists the options and the gaps up
to the size wide that no path closes.
The menu item opens a Gap Options dialog. With Preview on, the options
apply live and the gaps show on the canvas in the preview color, and
OK keeps them as one undo step. vectorcraft-pathops gains find_gaps
and live_paint_with_gaps.
Docs: docs/mcp.md, docs/target-app-parity.md.
i18n: the 19 complete catalogs have rows for the dialog's labels, and
bg's Gap Options menu label now names gaps instead of line spacing.
Window › SVG Interactivity was a disabled menu item. VectorCraft could
not attach JavaScript to an object's events or link JavaScript files
for SVG export.
The SVG Interactivity panel lists 19 events, from onfocusin to
onscroll. Pick one, type its JavaScript and press Enter to add it to
the selected objects; the list shows their events. Remove Selected
Entry removes the picked event, and the panel menu's Clear Events
removes all of them. Link JavaScript Files… opens the JavaScript
Files dialog, which adds a path or URL to the document's list and
removes the selected one. Its Choose… button puts a picked file in
as a file:/// URL. The commands are svgInteractivity.info,
setEvent, removeEvent, clearEvents, addFile and removeFile, and
ui.javascriptFilesDialog. Each edit is one undo step. A document
links at most 64 files.
SVG export writes each event as an event attribute on the object's
element and each file as a <script xlink:href> element. With the SVG
Tiny 1.2 profile, export leaves the events out with a warning. SVG
import reads the listed event attributes and the script links back
as text. It never reads a linked file or runs a script, and it leaves
inline scripts and the links after the first 64 out with a warning.
The native format keeps both.
An unnamed <g> with data-* attributes of its own around a single
object now imports as a group. Before, import folded it into the
object, which then took the group's data-* or, when it had its own,
dropped the group's. An unnamed <g> with event attributes stays a
group in the same way. The SVG import fuzz tests now include event
attributes and <script> elements.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
docs/ui-parity.md.
Native files remember the grid like the saved view, so reopening restores it.
Toggling it is still view state: no undo step, document not marked modified.
Fixes#1968
The MCP server read one line, ran it and answered it before reading the next,
so notifications/cancelled was never seen during a call and every request
(even ping) waited behind a running export.
- vectorcraft_doc::cancel: a thread-local cancel token and progress sink that
long work polls. Checkpoints: PDF pages, PDF flattening, geometry bake,
raster-effect flattening, drawing objects, raster artboards, and before any
file is written. A cancelled command returns EngineError::Cancelled and
changes nothing.
- Server::serve reads on its own thread: notifications/cancelled drops a
queued request or stops the running one (no reply, as the MCP spec says),
engine-free requests (ping, the list methods, prompts/get) are answered at
once, a request that would wait behind a call running for 2 s is refused
with -32003 naming that call, and _meta.progressToken gets
notifications/progress (page n of m). Queue and output are bounded.
- The remote backend stops waiting for the app when the call is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
Unit fields and length strings read a percentage operand as a share of
a value. After * or /, the percentage scales the term before it:
3cm*50% is 1.5 cm and 3cm/50% is 6 cm. After + or -, it adds or takes
away that share of everything before it: 50pt+25% is 62.5 pt and
100pt+20pt-50% is 60 pt. Before this change these expressions read as
nothing, and the field kept its old value.
The parser now splits a sum at its last + or -, so a percentage applies
to the whole sum before it. Text without % gives the same values as
before, apart from float rounding. A percentage on its own (50%) still
reads as nothing, and percent and degree fields still read % as their
suffix.
Command length strings use the same parser: file.new's width and
height, the distance params and the length preferences.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
Store the registration point with the symbol and place instances so that point lands on (x, y). Symbol Options exposes the same 9-point control as Transform.
Co-authored-by: Cursor <cursoragent@cursor.com>
An Intertwine group keeps its objects as they are, in their own stacking
order; each member can be drawn over the others in an area of its own.
The group draws, hits, saves and exports through its live expansion, so the
members stay editable and Release gives them back unchanged.
object.intertwine.arrange picks an overlap area by a click point or by a
closed path drawn around overlaps and toggles which member is on top
there, or brings a member to the front or sends it to the back where three
or more objects overlap.
Found while testing crates/doc/src/lib.rs:~298 (parse_measure, picas+points branch)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Found while testing crates/doc/src/lib.rs:269-297 (parse_measure, used by Unit::parse and parse_number)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
The decoder's 512 MB limit is on the file's samples; a grey image within it
is four times that once converted to RGBA for the Eyedropper or a recolour,
which the web build can't allocate. The size is now read from the header and
held to the allowance the importers and the renderer use.
A native file (or a pasted document) whose node, slice or asset ids or whose
next-id counter sit at u64::MAX made the next allocation overflow: a panic
with overflow checks, a wrapped counter handing out ids already in use
without. fix_next_id now leaves ids and counters from 2^62 up out of the
count, so new ids start under them; alloc_id saturates. Artboard and graphic
style ids take the smallest free id when the largest is u32::MAX instead of
wrapping to the reserved 0.
Every symbol instance was measured as its transform applied to the
20 × 20 square around the origin, which symbols made in the app keep
their art in. The SVG and DXF importers keep symbol art as drawn, so
the box of an instance of an imported symbol did not match its art.
The SVG Star instance at x 20, y 30 draws from (20, 30) to (40, 50)
and was measured from (10, 20) to (30, 40). Align moved such an
instance by the wrong amount, clicks and marquees beside its art
selected it, and the canvas, exports and prints left it out when its
art reached the view or the page and the square did not.
An instance is now measured by its symbol's art, which
Document::symbol_boxes looks up in the document each time
(Node::geometric_bounds_with, visual_bounds_with and
reach_bounds_with). With Use Preview Bounds on, the strokes in the art
count at their own weight, as the canvas draws them, and
object.setBounds counts them at that weight when it sizes an instance
or an object that holds one. When strokes do not scale and a width or
height of 0 or more is smaller than what a path's stroke adds,
object.setBounds now gives the path no width or height, as it does
for an instance whose art has strokes; before, it mirrored the path.
With Use Preview Bounds on, object.setBounds now measures the margins
that strokes add object by object, the members of groups and the
objects in symbol instances' art included, and solves for the width,
height and reference point asked for when the width and height are 0
or more. Before, it measured the margins of the whole selection and
could miss the size or the reference point asked for when strokes did
not scale and the objects' strokes added different margins, and when
strokes scaled and the width and height were out of proportion, even
for one path. A clip group, a Shaper Group, a compound path, type, and
a group or instance with effects or an opacity mask of its own are each
measured as one object, and so is an instance in perspective or one
turned or slanted relative to the bounding box, other than by quarter
turns. When the selection holds more than 4,096 objects to measure this
way, each selected object is measured as one. Instances inside symbol
art are measured by their own symbol's art. An instance is measured as
the square when its symbol is missing, when its symbol or a symbol
nested in its art holds an instance of itself, and when symbols nest 32
deep in its art.
Align and Distribute, the Transform panel, the bounding box and the
selection outline, clicks, the marquee, document.inspect and
document.node, Fit to Artwork Bounds and Fit to Selected Art, canvas
culling, thumbnails, the SVG filter region of an instance with a
raster effect, raster effect images, Export Selection, the SVG of an
artboard, printing, and the PDF, EPS, EMF/WMF and DXF writers use the
new box. The renderer also culls an instance by the effects and
brushed strokes in its art, and it culls a blend, envelope or repeat
by the brush art of what it holds and the effects in the art of the
instances in it. It culls an instance with geometry effects of its own
by the effects in its art after those geometry effects reshape the art.
It measures the effects in a symbol's art once for each symbol and
linear part of the transform that places it. For symbols whose art
holds instances, it measures at most 4,096 placements a frame, and at
most 4,096 more for each pattern tile it rasterizes and each placed
document it draws. Past that, it estimates the reach from the symbol's
reach with no transform, which it measures once. When the drawn
document's symbols change, the renderer drops the cached bounds of the
instances and of the objects that hold them.
The PDF and EPS writers, the SVG of an artboard and Skip Blank
Artboards grow the box of an instance whose art holds brushed strokes
by 16 times the widest stroke (at least 1 pt) of the objects in that
art that have a brushed stroke, plus 8 pt, as the renderer grows the
cull bounds of a brushed path. They keep an instance whose brush art
reaches the page. The SVG of an artboard also keeps an object that
holds an instance when what the canvas paints for it, the effects in
the symbol's art and the instance's own included, reaches the artboard.
Not yet: other commands that measure objects, such as Select › All on
Active Artboard, Transform Each and Convert to Artboards, still measure
an instance by the square.
Docs: docs/mcp.md, docs/target-app-parity.md.
Delete, Cut, Group, Make Compound Path, Make Clipping Mask, Send to
Current Layer, Ungroup and Release Compound Path removed, inserted or
moved one object at a time. duplicate_in inserted one copy at a time;
Duplicate, Copy in the Move, Rotate, Scale, Reflect and Shear dialogs,
Transform Again after a copy, Transform Each with Copy, the perspective
copies and each move of an Alt-drag call it. Each insertion or removal
moved the later objects of the same layer or group to other indices.
The next lookup by id then walked the tree, and after every fourth such
walk Document::index_path rebuilt the whole lookup cache. Each command
did work that grew with the number of objects times the size of the
document: with 25,000 rectangles selected, a release build of
vectorcraft-cli took 7.2 s to group them and 11.5 s to copy them with
object.transform.
Document::remove_many, Document::wrap and Document::insert_beside
remove nodes, wrap them in a new node, or put nodes directly above or
in place of their anchors, in one pass over the children of each
parent. Each finds the nodes with one index_paths call, checks every id
before it changes anything, and clears the lookup cache once. The
commands above use them. The objects keep their order, the copies take
their ids in the same order, and the selection, the undo step and the
journal are the same. duplicate_in still copies one root at a time when
a root is listed twice or lies inside another root. A release build
with this change groups the 25,000 rectangles in 27 ms and copies them
in 121 ms.
Docs: docs/target-app-parity.md.
A background drawn at the artboard's own position could sit 3e-14 pt outside it and
stay behind when the artboard moved, was copied or scaled its art. Art within a
millionth of a point of the artboard's edges now counts as inside it.
The fix and both tests are from #1295 by Luca Lorenz, without its change to art that
only partly overlaps the artboard.
Co-authored-by: Luca Lorenz <lucalorenzetti1993@gmail.com>
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
History was limited by step count only; a whole-selection move of 50k paths keeps ~40 MB per
step. Steps now carry a size estimate (only unshared subtrees are visited) and the oldest are
dropped beyond a byte budget, keeping the last 8. Documents entering history drop their id
index, selections are shared between steps, the command journal is bounded (held while an
Action records), and document resources are copy-on-write. Saved files are byte-identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Text formatted in a graph, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-the-text-in-graphs.html
describes (the whole graph with the Selection tool, or labels picked
with Group Selection, through the Character and Appearance controls),
now survives the graph being drawn again from its data.
- A graph keeps a character style per kind of label: value axis
numbers, category labels (category axis, radar spokes, pie names)
and legend labels (beside or across the top, or in wedges).
- text.setStyle, text.setFormat and fill/stroke changes on a graph's
labels apply the same change to their kind's kept style, so only what
the user changed is kept and every label of that kind follows. A
change to part of a label's text isn't kept.
- Labels are told apart by where the graph draws them, not by their
text, so a category named "2" and the value axis' 2 stay apart.
- Label spacing follows a kept size (legend rows, offsets from the axes
and wedges), so bigger labels don't overlap; at 9 pt it's as before.
Wedge labels stay white on dark wedges unless given a colour.
- A kept style from a file is held to the Character controls' limits.
Own choice, as the page doesn't say what happens on a data change:
formatting one label formats its whole kind, since the labels are drawn
again from the data. Other ways of restyling text (eyedropper,
character styles, Find Font) aren't kept yet. New fields are written
only when set; graphs without kept formatting draw the same art as
before.
Graph Data's Transpose row/column and Switch x/y, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-data.html
describes, a `|` in a label as a line break, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/add-graph-labels-and-data-sets.html
describes, and the pie graph options of
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-pie-graphs.html
- graph.setData {transpose: true} swaps rows and columns (after any new
data in the same call); a graph with more categories than a graph can
have series (256) is refused rather than cut. {switchXY: true} swaps
each scatter series' y and x columns, labels included.
- A `|` in a category or series label starts a new line: legend rows
grow with their lines, labels beside an axis or in a wedge centre
theirs. A label of only `|` is blank.
- Pie graphs: pieLegend none|standard|wedges (Legends in Wedges puts the
series labels inside their wedges, in white on dark wedges, drawn over
the pies), piePosition ratio|even|stacked and pieSort all|first|none,
as dropdowns in the Graph Type dialog, which lists them for pie graphs
only.
Own choices, as the page doesn't say: Position and Sort keep today's
drawing by default (Even, None); Ratio sizes pies by area, the biggest
keeping the full size; Stacked pies share a centre, each drawn as the
ring outside the next smaller one so none covers another, with their
names over them.
New fields are written only when set. Graphs with default options draw
the same art as before.
Graph designs are named art a graph draws in place of its default
marks. Marker designs follow
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/apply-marker-designs-to-graphs.html
and the Graph Design dialog
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/reuse-graph-designs.html
- graph.design saves the selected art as a named design (Save Design),
pastes a copy of a design into the document, selected, to edit and
save again (Paste Design), and deletes one; graphs drawing a deleted
design go back to their default marks.
- graph.marker draws the data points and legend swatches of the series
picked with Group Selection (or listed, or every series) with a
design: its backmost object is scaled to fill the default marker's
square, strokes, effects and pattern tiles scaling with it. Line,
scatter and radar series; null goes back to the default square.
- Object › Graph › Design… and Marker… open dialogs listing the
document's designs.
Own choices, as the pages don't say: the backmost object's bounds, not
only a rectangle's, set the size (a single object uses its own bounds);
Delete Design manages the list; a design keeps its own paint, so
painting a series doesn't recolour it.
Designs are stored in a new `graphDesigns` list and series designs in
`seriesMarkers`, written only when present. A graph saved as a design is
kept as the plain art it draws. A design holds at most 2,000 objects, a
document 1,000 designs, and a graph whose designs would draw more than
200,000 objects draws default squares; a file's designs are tidied the
same way on open. Global swatch edits, image relinking and placed
documents see design art like symbol art. Graphs without marker designs
draw the same art as before.
Every edit of an object copied its whole appearance (its fills, strokes and effects, about
540 bytes for a basic object) into the new node, though a move leaves it as it is. Over 45
whole-selection moves of 10,000 paths, undo history grew by 589 MB; now 349 MB (41 % less), and
a nudge or a drag of the selection takes 12 ms instead of 15.
- Node::appearance is a vectorcraft_doc::Shared<Appearance>: copy-on-write. A clone shares it,
and the first change through DerefMut copies it (Arc::make_mut). Reads, writes, equality (also
against a plain Appearance) and the saved form are those of the Appearance itself, so call
sites read and change it as before. Sites that build or assign a whole appearance add .into(),
and the few that need a plain copy take (*n.appearance).clone().
- Node::transform changes the appearance only when it has gradients to transform, and pattern
paints are transformed only when there are some: a move no longer copies an appearance it
doesn't change.
The workspace suite (5,301 tests) and clippy pass with the change; the doc and engine suites
pass again after the transform guard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
The previous commit rebuilt the cache as soon as a cached path went stale, and built it as one
Vec path per node, hashed with SipHash. An edit that removes many objects one by one
(Pathfinder Unite of 1,000 paths) went stale on every removal, and Unite took 105 ms instead of
42 ms.
- The cache is now one flat table of (parent entry, index among siblings) with a one-multiply
id hasher, so a rebuild is about one walk and allocates nothing per node.
- A stale path walks, as an id the cache doesn't have does, and rebuilds only after a few.
Either way a lookup stays within a small factor of a walk.
At 1,000 paths, Unite takes 45 ms against main's 42. At 100,000 paths the gains of the cache hold:
hit test 1.7 → 0.36 ms, handle drag 6.5 → 2.7 ms per move. The cached-lookup tests pass unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
BFlat