Every pointer move of a frame went to whatever tool was active, so with
a fast mouse (or a pen) a tool whose drag preview is costly (the
Selection tool moving a large selection, Free Distort, the Width tool)
redid it for each, up to 64 times a frame.
Tool::wants_samples (default false) says a tool builds a stroke from
the drag's samples: the Pencil, Paintbrush, Blob Brush, Eraser, Knife,
Smooth and Path Eraser answer true (the Paintbrush through its wrapper),
the Join tool doesn't. The canvas still reads the frame's moves every
frame, so the macOS feed's pressures stay paired, but replays them only
to such a tool; every other tool gets one drag a frame at the latest
position. A frame whose moves end where the last frame's did still
reaches the tool.
Tests: only_the_freehand_tools_get_every_move_of_a_frame (Pencil,
Paintbrush and Blob Brush get the 19 moves before the last, Selection,
Direct Selection and Width none),
a_mouse_stroke_keeps_a_frame_that_ends_where_it_started,
the_freehand_tools_want_every_sample, and
a_mouse_stroke_keeps_every_move_of_a_frame now checks every position in
order, not only the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Draw freeform paths with the Pencil tool says a small star appears on
the Pencil when it is ready to draw a freeform path, and Reshape paths
with the Pencil tool says the star disappears over a selected path the
drag reshapes. The Pencil cursor had no star.
- New Cursor::PencilNew: the Pencil's crosshair with a small star where
the closing cursor has its ring. It becomes the crosshair with Use
Precise Cursors and as a system cursor.
- The Pencil shows it before a press when neither find_extend nor
find_redraw (the lookups the press uses, within Edit Selected Paths)
finds a selected path under the pointer. Over such a path and while a
stroke is drawn, the cursor has no star.
Docs: docs/target-app-parity.md.
shapeBuilder.merge built the planar map of the selection again, on the
thread that runs the command, although the Shape Builder tool had just
built the same map for its hover. The tool now returns its map from a
new Tool::shape_builder_map, and the command uses that map when its
inputs are the merge's inputs and its gap is the merge's gap; otherwise
it builds its own as before. The tool's map has the outline edges, so
erasing and splitting a stroke use it too.
With Shift or Alt held (Alt only while Alt key toggles to Smooth Tool
is off), a Pencil press on an end of a selected open path draws a
straight line that continues the path, but before the press the cursor
was the plain straight-line cursor. Draw straight lines with the Pencil
tool says a path-continuation icon appears on the Pencil over that end:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
Over such an end the cursor is now PencilContinue, the straight-line
cursor's line leaving a small filled square.
The check is the one the press makes (Edit Selected Paths, the same
end lookup). Away from the ends, with Edit Selected Paths at 0 pixels,
with nothing selected and while the line is drawn, the cursor is as
before.
Docs: docs/target-app-parity.md and docs/ui-parity.md, where the
duplicate Pencil lines and rows left by earlier merges are cut to one.
Holding Alt over a selection the Shape Builder had already mapped built
the planar map a second time, to add the outline edges that erasing
hits. A merge, and a Live Paint Bucket fill of a plain selection, also
dropped the map, so a gesture that left the document unchanged was
followed by another full build.
The Shape Builder now builds its map with the outline edges the first
time, and both tools keep the map until the document, its revision or
the selection changes.
When the inputs have more than 128 segments, a hover with the Shape
Builder or the Live Paint Bucket now builds the map on another thread
and highlights no region until it arrives, instead of holding up the
frame; the canvas checks for it each frame. A press waits for the map,
and the headless MCP host waits for it after a move. The web build has
no threads and builds the map at once. The Live Paint Selection tool's
hover no longer builds a map of the selection, which it did not use.
A Pencil or Paintbrush stroke released within Close Paths When Ends Are
Within of its start closes, but the cursor gave no sign of it. While the
pointer is where a release would close the stroke, the cursor is now
PencilClose (PaintbrushClose for the Paintbrush), the crosshair with a
ring, as Draw straight lines with the Pencil tool describes:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
The check is the one the release makes, on the end the stroke would
take (snapped for the Pencil). A straight line (Shift or Alt held at the
press), a stroke that continues a selected path, a stroke that redraws
one and a smoothing drag show no ring.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
With Shift held before a press, the Pencil now shows a new cursor,
PencilStraight: its crosshair with a short straight line where the
closing cursor has its ring. The cursor follows the rule the press uses
to start a straight line, so it shows exactly when the press draws one.
With Alt key toggles to Smooth Tool on and Alt held too, the Smooth
cursor shows as before. Once the press is down, and with the
Paintbrush, Shift leaves the tool's own cursor. Use Precise Cursors
turns the new cursor into the plain crosshair.
Draw straight lines with the Pencil tool describes a straight-line icon
on the Pencil while Shift or Alt is held:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
The Pencil and PencilClose entries in cursors.toml, the PencilClose doc
comment and the closing-cursor line in docs/target-app-parity.md said Alt
held while drawing closes the path. A drag started with Shift or Alt
held draws an open straight line and does not show the closing cursor,
so the texts now say Alt is pressed after the drag starts and name that
exception.
With Alt key toggles to Smooth Tool off, holding Alt when a Pencil drag
starts now draws one straight segment from the press point to the
pointer, at the angle the pointer takes, as Shift does at 45° steps.
Pressed on an end of a selected open path, the line continues the path
from that end. Both ends snap to Smart Guides as a stroke's ends do, and
the line stays open when Alt is still held at the release. Shift and Alt
together keep the 45° steps.
Before, a drag started and released with Alt held drew a closed freehand
path. Alt pressed after the drag has started still closes the path at
the release, and with Alt key toggles to Smooth Tool on, Alt still switches
to the Smooth tool. Before a Pencil press, Alt no longer shows the closing
cursor.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
CodeRabbit findings #2, #16, #31, #103, #114, #124, #162, #179, #182, #183, #185:
- Shortcut import review: example names for each code in one pass over the rows.
- Gradients: a midpoint stop is mixed from its two stops; freeform recolor samples its
increasing positions with one advancing search (`Gradient::sample_increasing_with`).
- Recovery: image entry names are looked up by address, and dead ones swept when the map
doubles, not on every image.
- Script checker: include cycles from strongly connected components (iterative Tarjan), not
a reachability row per file.
- Batch step references copy at most 256 MB of values for one step.
- DOCX: style ids over 256 bytes are ignored where defined and where used.
- DXF: layouts keep at most 4 MB of names; a hatch's loops count against the node limit.
- Freehand and Liquify: past 1000 samples a drag previews every n/1000 samples, strokes keep
at most 100,000 samples, and the stroke kept is previewed in full before it is committed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One rule for the hover's context (PR review follow-ups): the target is
recomputed where the pointer is, or cleared, whenever what lies under it
can change while Alt is held.
- The tool hovers only where the pointer is on the canvas itself
(`on_canvas`): under a floating panel, a menu, a popup or a dialog
its hover ends (Tool::hover_ended), as when the pointer leaves the
canvas or a pan, zoom or view-rotation press starts.
- The canvas keeps the hover's context: its rect, the view's centre,
zoom and rotation, and the active document's id and revision (which
moves with every edit, undo and selection change). When it changes
under a still pointer, a tool that asks (Tool::wants_rehover; the
Selection tool after an Alt hover) is hovered again at the pointer,
so wheel, gesture, key or command scrolling and zooming, tab
switches, edits and undos re-measure.
- Coming back onto the canvas re-hovers the tool.
canvas::tests::distance_guides_follow_what_lies_under_a_still_pointer:
a floating window over the pointer (fails without the on_canvas filter),
a 150 pt scroll that leaves empty artboard under it (fails without the
re-hover), a square made under it. select::tests::distance_guides_need_
alt_a_selection_and_smart_guides checks wants_rehover.
An Alt+Space pan press went to Drag::Pan and never reached the tool, so the Distance Guides stayed through the pan until the pointer left the canvas (PR review follow-up). One rule now covers all three cases: the tool's hover ends (Tool::hover_ended, renamed from pointer_left; Session::tool_hover_ended) when the pointer leaves the canvas with no press the tool holds, and when a press starts any drag that doesn't reach the tool (pan, middle-button pan, zoom box or scrub, view rotation, touch gesture). canvas::tests::distance_guides_go_when_the_hover_ends asserts they go at an Alt+Space press and stay gone panning out over a panel.
The pointer-left check skipped every drag, so Alt+Space panning out over a panel kept the measurements (PR review follow-up). Only a press the tool holds (Drag::Tool, Drag::Art) keeps its state now; pan, zoom box, zoom scrub, view rotation, gesture and presentation drags never reach the tool. canvas::tests::distance_guides_go_when_the_pointer_leaves_the_canvas pans out with Alt+Space; it fails with the old drag.is_none() check.
Leaving the canvas (for a panel, or out of the window) sent the tool no
hover event, so the Selection tool kept its Alt-hover target and went
on drawing the measurements (PR review finding).
- Tool::pointer_left: the pointer left the canvas with no button held;
the Selection tool drops its Distance Guides target and its Smart
Guides hover label. Session::tool_pointer_left reaches it.
- The canvas remembers whether the pointer was over it last frame: on
leaving with no drag it calls tool_pointer_left; on coming back it
re-hovers the tool even after a single jump egui doesn't count as
moving, so the guides show again.
Tests: canvas::tests::distance_guides_go_when_the_pointer_leaves_the_
canvas (fails before: the label stayed over a panel with Alt held),
select::tests::distance_guides_need_alt_a_selection_and_smart_guides
(pointer_left clears them).
Distance Guides, from the public "Use Distance Guides for accurate
placement" and "Smart Guides options" (Invoke Distance Guides) pages:
with Smart Guides on, something selected and the Selection tool,
holding Alt/Option over another object shows the horizontal and
vertical distances between the selection and it, and over an empty
part of an artboard the selection's distances from the artboard's left,
right, top and bottom edges.
- guides::distance_guides measures the selection's bounds to a box: on
an axis on which they lie apart, the gap between their facing edges;
otherwise the offsets of both pairs of matching edges. Each line runs
across the middle of the overlap on the other axis (else the
selection's middle), with a dashed line out to the target's edge when
it passes beside it. An artboard is always measured edge to edge.
Labels are in the General unit, in the smart guide colour.
- The Selection tool keeps what its Alt hover points at and draws the
guides while idle; letting Alt go (the canvas re-hovers on a modifier
change), a press or moving off clears them.
- Overlay::Distance: the line with end ticks and its length in a pill;
the canvas draws it.
- Preferences › Smart Guides › Invoke Distance Guides (`distanceGuides`,
on by default), with i18n rows; View › Smart Guides gates it too.
- Hover only, as the pages describe: nothing while moving or nudging.
Tests: select::tests::alt_over_* (gap and edges beside and below,
artboard edges in pt and mm), distance_guides_need_alt_a_selection_and_
smart_guides, tests_prefs::invoke_distance_guides_measures_the_selection_
to_the_object_under_alt, canvas::tests::alt_over_another_object_draws_
the_distance_guide_label (frame test of the drawn label and line).
Illustrator links type in an area or along a path (https://helpx.adobe.com/illustrator/using/manage-text-area.html); until now only area type threaded here. Type on a path that overflows ends its line where its text stops fitting, so a story flows on from it, and its red out port, just past its end bracket, loads the Selection tool with the text as area type's does. A new frame threaded from it at a point is type on a path of its shape.
With Use Preview Bounds on, every hover frame's cursor and every
pointer move measured the selection again, and with Smart Guides on
each selected object too, evaluating their geometry effects each time.
The session now keeps a PreviewMemo, which ToolContext::preview_memo
passes to the tools. selection_bounds, selection_box and the object
bounds that Smart Guides find centers in while hovering read it. The
memo holds the measurements for one key: the document's uid and
revision, the selected objects and Use Preview Bounds. A new key
replaces them. VectorcraftApp::selection_box in the UI keys on the
uid, the revision and Use Preview Bounds. A ToolContext without a
memo measures on every call.
Holding Alt while drawing with the Paintbrush, or with the Pencil while
Alt key toggles to Smooth Tool is off, closes the path at the release,
but the cursor did not change. The reference app's Paintbrush shows a
small loop while Alt is held, and its Pencil shows a small circle.
Cursor::PaintbrushClose and Cursor::PencilClose show while Alt is held
with the Paintbrush, and with the Pencil while that option is off,
before the press and while drawing. Both tools still borrow the
crosshair, so the closing cursors are drawn as that crosshair with the
PenClose ring. Use Precise Cursors turns them into the plain crosshair,
as it does PenClose.
With Alt key toggles to Smooth Tool on, the Pencil shows the Smooth
cursor while Alt would smooth: with Alt held before a stroke begins to
draw, and through a smoothing drag even after Alt is let go. Before, it
showed the Smooth cursor whenever Alt was held, also during a stroke
that kept drawing, and not during a smoothing drag once Alt was let go.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
The selection tools' clipping-path outline hit was also used where the
Selection and Direct Selection tools act on what is drawn rather than
select. Near a layer's clipping mask edge, with art drawn over it:
loaded text threaded into the unpainted mask instead of the art, a
double-click on type entered isolation on the mask instead of editing
the type (Selection) or did nothing (Direct Selection), and Cmd/Ctrl+
Shift double-click could not release a guide path there. These now
take the ordinary hit (ToolContext::hit_options); a press or hover
that selects keeps the outline hit.
Tests (each fails with the selection hit options):
select::tests::loaded_text_threads_into_the_art_on_a_layer_masks_edge,
a_double_click_on_type_at_a_layer_masks_edge_edits_it (Selection and
Direct Selection) and a_guide_on_a_layer_masks_edge_is_released, over
the new testutil helpers add_masked_layer and
doc_with_type_on_a_layer_masks_edge. Recorded in
docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A clip group answered a press only strictly inside its clipping path,
and there the art above the path came first in the hit test, so where
the clipped art extends past the mask's edge the clipping path's
segments could not be reached on the canvas.
With the new HitOptions::clip_outlines, which the Selection, Direct
Selection and Group Selection tools set
(ToolContext::selection_hit_options), a press within the selection
tolerance of a clipping path's outline, inside or just outside it,
hits the clipping path (HitKind::Outline) before the art it clips:
Direct Selection takes its segments and the Selection tool the clip
group. It applies to a clip group's clipping path and to a layer's
clipping mask, and only to one a click may hit (may_hit: visible,
editable, within reach). Inside the mask the art is hit as before.
The other tools, which act on what is drawn (the eyedropper, type,
gradients...), leave the option off, and hit_test_visible never
applies it, so they still take the art at the mask's edge rather
than the mask's empty appearance. Select Behind's one-pass walk takes
a layer mask's outline first too, so it lists what the repeated hit
test finds. Object Highlighting and a right-click's selection in the
canvas (selection_hit_at) take what those tools take; dropping a
swatch on art still hits what is drawn.
The reference app reshapes a clipping path with Direct Selection:
https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-clipping-masks.html
Tests in doc: a_clipping_path_is_hit_on_its_outline_before_its_art,
only_the_selection_tools_hit_a_clipping_path_on_its_outline and
select_behind_takes_a_layer_masks_outline_first; the random Select
Behind test now clips layers and sublayers and sets clip_outlines,
and fails without the Select Behind change. In tools,
a_press_on_a_clipping_path_takes_its_segment_over_the_art fails
without the change; select::a_press_on_a_masks_edge_selects_its_clip_group
fails when the Selection tool uses the plain options; the eyedropper
copies the art on the edge. Recorded in docs/ui-parity.md,
docs/gaps.md and docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Wire the View menu toggle and add glyph baselines and bounds to drawing snap targets so point type placement lines up with existing text when Smart Guides are on.
Co-authored-by: Cursor <cursoragent@cursor.com>
Keyboard increment (Shift ×10) moves the active glyph through text.touchType, with vertical type remapping like the Type tool.
Co-authored-by: Cursor <cursoragent@cursor.com>
Measurement labels while drawing now match the Measure tool (D, angle, dX/dY) when the preference is on.
Co-authored-by: Cursor <cursoragent@cursor.com>
VectorCraft had no Objects on Path. A click with the Objects on Path
tool attaches the selected objects to the path clicked. The tool is in
Edit Toolbar's Modify section and the Blend tool's flyout, and Object ›
Objects on Path › Attach and the context menu with two or more objects
selected choose it. The objects and the path go into an Objects on
Path group with the path at its bottom.
- object.objectsOnPath.attach orders the objects column by column from
left to right and top to bottom in each column. The first one sits
on the path's first anchor, the last one sits on the end of an open
path, and the rest are spread evenly by length; a closed path takes
them all the way round. Each object's attachment point (Pivot, one
of nine, default the center of its bounds without strokes) sits on
the path, and the object is turned to the path there. An object that
was rotated by an angle other than a multiple of 90° is first turned
to the nearest multiple of 90°. Rotate tilts every object by that
many degrees counter-clockwise. Symbol instances are measured by
their art. Guides, compound paths, type, paths without length and
graphs are refused with a reason.
- After every edit the objects go back on the path: editing the path
moves them, an object moved on its own goes back, and objects moved
into or out of the group in the Layers panel join the end of the
path or leave it. Scaling, shearing or reflecting the whole group
keeps each object's scale, shear or reflection, and the objects are
spread evenly along the transformed path again. Undo takes the path
and the objects back in one step, and a copied group stays live on
its own path.
- object.objectsOnPath.options changes Pivot and Rotate, and
object.objectsOnPath.expand leaves a plain group. Both act on the
groups that `ids` names, or on the groups of the selection when
`ids` is not given.
- The native file keeps the group live; SVG, PDF and the other exports
write plain art. The tool highlights the path under the pointer, has
a cursor entry, and Escape during a press cancels the click.
Part of #2545
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group keeps its original shapes as its first child, at no
opacity, and clicks do not pick them outside Construction mode. The
Lasso, the Add Anchor Point, Delete Anchor Point, Anchor Point and
Scissors tools still picked their anchor points and segments, also
where the group erased the face, and Smart Guides, Snap to Point and
the transform tools' reference point snapped to them. The Lasso and
the anchor tools also picked art outside the isolated group or object
in isolation mode.
The Lasso and the anchor tools now visit only the art a click can pick:
the isolated object in isolation mode, and a Shaper Group without its
original shapes unless they are isolated (Construction mode). Smart
Guides and Snap to Point leave the original shapes out of their
targets, and Spacing Guides leave out their bounds when a face moves.
The transform tools' reference point snaps to an original shape only
when that shape is selected, or under the pointer in Construction
mode. The Shaper Group test document moves into the shared test
helpers.
Docs: docs/shaper.md, docs/target-app-parity.md.
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
In a rotated view the resize and rotate cursors were the ones for an
unturned view. With the view turned 90°, the right-middle handle of a
selection's bounding box shows at the middle of the box's bottom edge
and drags up and down, but its cursor was the left-right arrow. This
affected the Selection, Free Transform, Artboard, Slice Selection, Crop
Image, Perspective Grid and Perspective Selection tools, ruler guides,
and the spread handle of a freeform gradient.
Now each of these cursors turns with the view to the nearest 45°. The
Selection tool and the Perspective Selection tool turn the handle's
direction by the view's angle before they round it to a cursor.
ToolContext::view_angle reads the view's angle from the screen frame,
and Cursor::turned turns a resize or rotate cursor by it. The new
Cursor::rotate_about_in_view turns the pointer's direction from the
center by the view before it picks one of the rotate cursor's eight
directions. Cursor::rotate_about keeps its signature and behavior. At
0° every cursor is as it was.
Docs: docs/target-app-parity.md.
The toolbar listed the Touch Type tool (Shift+T), but choosing it did
nothing. The reference app's Touch Type tool moves, scales and rotates
one character of live type by dragging the handles of a box around it.
A click with the tool now selects one character and shows a box around
it. Dragging the box or its lower-left handle moves the character along
its line and up or down. The upper-left handle scales it vertically,
the lower-right handle scales it horizontally, the upper-right handle
scales it proportionally, and the upper-middle handle rotates it. A
character rotated by up to about 84 degrees follows the pointer too.
Near a quarter turn, a drag moves it only along its line. Escape
cancels a drag, and otherwise lets go of the character.
Each drag is one text.touchType command and one undo step. It sets the
character's baseline shift, scales and rotation, and moves it along its
line by changing its own kerning and the kerning of the character
before it, within the kerning range. The characters after it stay
where they are. Where the font kerned the character with its
neighbors, the two kerning values also keep the character in place
when it is only raised, scaled or rotated. The characters after it
stay where they were, or move by the change in its width when it is
scaled. The first character of a line and a right-to-left character
move only up and down. The type stays editable.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Selection tool shows two pie widgets just outside a selected live
ellipse while the bounding box shows: one at the Pie Start Angle and
one at the Pie End Angle. Dragging one sets its angle to the angle of
the outline's point that lies in the direction of the pointer from the
ellipse's center, in one undo step, through `object.setLiveShape`'s
`pieStart` or `pieEnd`. Double-clicking one makes the ellipse whole
again (0° to 360°). Where the two widgets coincide, as on a whole
ellipse, a press takes the End widget.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
A Selection tool marquee selected every object it touched, a Group
Selection marquee selected the anchors inside it, and E pressed during
the drag did nothing. Now E switches either marquee to selecting only
the objects that lie entirely inside it, measured by their geometric
bounds, and E pressed again switches it back. Each marquee starts in
the default mode.
- The Selection tool selects a group only when the whole group lies
inside. Group Selection selects the objects inside groups, each as a
whole object. Shift still toggles. Direct Selection does not take E.
- The ruler guides the marquee selects with the art are limited the same
way: an artboard guide is selected when its whole length lies inside,
and a canvas guide is not selected.
- Tools receive letter keys as ToolKey::Letter. While a tool is busy, the
desktop app sends it each press of a letter it claims, without Cmd,
Ctrl or Alt and without key repeats, and headless press_key sends a
claimed letter the same way. With nothing dragged, press_key {key: "e"}
still chooses the tool bound to E.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group had no arrow widget for switching between Face Selection
and Construction mode.
With the Shaper or Selection tool active, a selected Shaper Group, or a
group with one of its faces selected, now shows an arrow beside the
middle of the right side of its source shapes' bounds. A click on it
isolates the source shapes (object.isolate). A second click leaves
isolation with the group selected (object.exitIsolation). The arrow
points right in Face Selection mode and left in Construction mode.
In Construction mode a Shaper click selects an original shape of the
isolated group. Before, it selected the whole group outside the
isolation, and shaper.select with source could pick an original of
another Shaper Group lying above it.
Docs: docs/shaper.md, docs/target-app-parity.md.
Make and Edit choose the Intertwine tool: hovering highlights the overlap
area under the pointer, a click swaps which object is on top there, and a
path drawn around overlaps (Shift: a rectangle) arranges every overlap
inside it; Esc or Enter goes back to the tool chosen before. The overlap
faces move to vectorcraft-tools, shared by the tool and the command.
Clicks inside a raised area pick the member drawn on top there, the
Object menu gets the Intertwine submenu, and the new labels and the
predicate message are translated in the complete catalogs. docs/gaps.md
records what landed under G13.
The Pen's pointer showed the new-path asterisk before the first anchor
and also while a path was being drawn, where a click adds the path's
next anchor. A new Cursor::PenDrawing, the pen nib without a badge, now
shows there. The close, convert and join badges still show over the
first anchor, the last anchor and another open path's end. The asterisk
shows only where a click starts a new path.
The Continue, Add and Delete badges now also show after another path
was selected while the Pen was still drawing (for example with a
Cmd-click). A click there already continued the path or added or
deleted an anchor, but the pointer showed the asterisk.
Beside every corner of the bounding box the curved rotate cursor bowed
up. It now bows from the box's centre toward the pointer, in 45° steps
(Cursor::RotateToward, made by Cursor::rotate_about): at the top right
it opens toward the bottom left, at the bottom right toward the top left.
The Selection tool shows it over the rotate zone and while rotating (it
follows the pointer round), and Free Transform does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
