Review of #5694 asked for two changes.
Add-on, not a core tool, as Enclosing Lasso is:
- The command is addon.contour.set, in an add-on module of its own
(crates/engine/src/cmd/addons/contour.rs) with its tests beside it.
- The tool is listed under Object > Plug-ins > Contour and under its own
"Contour" heading in All Tools. It has no Basic or Advanced toolbar
slot and no default shortcut. The Contour bar is unchanged.
- The add-on drawer test lists Contour with the other add-on tools.
- Docs (mcp.md, the parity documents, ROADMAP) say add-on and use the
new command name; mcp.md gains a Contour add-on section.
Translations: rows for "Contour", "Contour Tool", "Sharp", "Bake" and
"Turn the Contour into plain paths" in all 26 catalogs ("Round" and
"Square" already had them). Drafted from each catalog's own vocabulary
(for Bake, the verb it uses for Expand Appearance; a word other than the
catalog's Stroke or Path word for the tool's name where they collide);
they are not native-speaker reviewed.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Add a Contour tool (Modify group). Dragging away from a selected path or
shape's edge makes a copy of it that carries a live Offset Path effect,
grown by the drag; dragging toward the inside shrinks it. The result is
one undo step and stays editable until baked with Expand Appearance. A
second drag on a selected Contour changes its distance instead of
nesting another effect.
- object.contour: the command behind it (offset, sharp/round/square
corners, miter limit), usable over MCP and the control channel too.
- Contour tool: live preview, Shift rounds to whole points, Escape
cancels, a dashed guide with a white halo shows the outline the shape
had, and a pill shows the distance.
- Contour bar: a floating bar above the selection with the offset box,
Sharp / Round / Square and Bake (Expand Appearance).
- Toolbar slot under Modify (Basic and Advanced) and dc-contour.svg, an
original icon with its ASSETS.md row.
- Tests for the command, the tool's pointer gestures and the bar; the
border-with-a-gap recipe (two Contours, bake, Minus Front) is covered
end to end.
- Docs: beyond-Illustrator row, revision histories and the ROADMAP log.
Beyond Illustrator: a VectorCraft design built on Offset Path. Scores and
estimates unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A document tab dragged sideways along the tab strip moves its document to the
place an insertion line marks; the current document stays current. Dragged
above or below the strip, the tab still tears off into a floating window. The
views Window > New Window opened move with their document, and each document
keeps its own zoom, centre and artboard.
The move is the engine command `document.move {from?, to}`, so the control
channel, MCP and recordings reach it, and a replay moves the document before
the steps recorded after it. `sync_views` keeps the views with their documents
by uid when the documents change order.
Behaviour: https://helpx.adobe.com/illustrator/using/customizing-workspace.html
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Delete Stop button sat at the end of the Opacity/Location row, below
the selected stop's Color row. In the default docked panel height that
row is cut off as soon as a stop is selected, so the button looked
missing. It now sits at the right end of the ramp, level with it, and
shows whenever the ramp does (with options hidden too). It deletes the
selected stop, never below two, as before.
Adds a headless panel test for deleting a stop by dragging it off the
ramp and with the button beside it, one undo step each, and for a
two-stop gradient keeping both.
addon.pathtools.cornerSet takes `every` ("all", "odd" or "even"; default
"all"), which keeps, of the anchors already chosen (named, direct-selected
or all), only the odd- or even-numbered ones, counted along each path from
its first anchor as number 1. Anchors that take no corner still count, so
the pattern follows the path's anchor order on open and closed paths; when
nothing is left the command says so. Unknown values are refused.
Object › Plug-ins › Path Precision Tools › Set Corners… (also a button in
the Anchor Inspector's Corners section) opens a dialog with Radius, Corner
kind and Anchors (All / Odd-Numbered / Even-Numbered) that previews on the
canvas and commits as one undo step.
Locking or hiding the layer (or a group) around the isolated object left
its art selectable with the Selection tool: the isolation branch of the
hit test only checked for a locked artboard, and the marquee's checked
nothing. Both now pass over isolated art that isn't editable.
Space pressed after a tool's press has begun (Pencil, a brush, a shape, a
selection drag) switched the cursor to the hand but panned nothing: the pan
starts only with Space down at the press. It is ignored now, so the cursor keeps
the tool's own.
Test: space_during_a_pencil_drag_keeps_the_pencil_cursor (fails without the fix:
Grab instead of the pencil's crosshair).
A double-click makes the row's artboard active and fits it in the
window (view.goToArtboard, as the Artboards panel does), keeping the
dialog open and the artboards chosen before it. Parity docs record the
Selection Tools add-on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Export > Export As PNG... opened PNG Options with no artboard
chosen, and a single-image export without one writes the first
artboard, whichever was in use. With no artboard choice given, it now
takes the active artboard, or each artboard the Artboard tool has
selected (one file each). A choice the caller gives is kept.
Choosing units in Preset Details restyled every preset card in the Recent
and Saved tabs, so switching between inches and millimetres rewrote all the
user's templates at once. The pane's options apply to the selected preset
(helpx, "Create and save custom document presets"), so only the chosen card
follows the chosen units now; the others keep the units their document or
preset was made in, and clicking one brings its units back. The built-in
category tabs still show the chosen units (#2078).
Generated with [Devin](https://devin.ai)
Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
The Actions panel menu's Playback Options... sets how actions play (ui.action.playbackOptions {speed?, seconds?}). Accelerated, the default, plays every step at once as one undo step, as before. Step by Step plays one step per frame so the canvas draws each step's result, and Pause For waits 1 to 60 seconds between steps; each paced step is its own undo step. Stop Playing/Recording ends a paced playback, and another action does not play while one is paced. The setting is kept with the UI preferences. Batch... plays at full speed.
Batch Trace Folder replaces a script, so it is now a Document Tools
add-on command, addon.document.batchTraceFolder, under Object ›
Plug-ins › Document Tools (as Export All Open Documents is), and no
longer in Object › Image Trace. Behaviour, caps and the refusal of a
folder too big to list in full are unchanged; the tests move with it.
The status messages have @msgplural rows in every catalog, as does the
menu label. When some images trace and some don't, the status is one
counted message ("Traced {n} images; not traced: {failed}") so it
translates as a whole.
imageTrace.batchFolder opens each image in a folder, traces it with a
preset (optionally expanded), saves it into a destination folder under
its own name (vectorcraft, svg, pdf, ai or eps; taken names numbered so
nothing is replaced) and closes it again whether it traced or not; the
active document stays active. Object > Image Trace > Batch Trace Folder
asks for both folders. Not on the web.
A Copy of ruler guides alone left the system clipboard as it was, so the
next Paste took whatever another app had copied before instead of the
guides. The guides-only Copy now empties the system clipboard (on the
web, empty text through egui with Copy As SVG on), as any Copy replaces
what the clipboard held, and drops an earlier Copy's formats not written
yet. What another app copies afterwards still pastes.
Edit > Copy and Cut put the selected ruler guides on the clipboard,
with the selected objects or on their own. Pasting puts them on the
layer new art goes to, selected, in the same undo step: with objects
they move as the objects do; alone they keep their places, while Paste
in Place / in Front / in Back put them on the active artboard as they
lay on theirs, and Paste on All Artboards on every artboard.
While Select > Start Global Edit can run, the Control bar shows a Global Edit
Options dropdown after Recolor Artwork. It opens the Properties panel's Global
Edit Options (Match: Appearance, Size; On Artboards; Include Objects On
Canvas; Result(s)), so both set the same options, and it is off while Global
Edit is on, as the Properties dropdown is. The bar leaves it out when no room
is left for it.
Public reference:
https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-similar-objects.html
The dropdown takes room ahead of the inline X/Y/W/H fields, so the ruler-origin
tests that read X/Y from the Control bar draw it 1700 px wide.
Window › Toolbars › Manage Toolbars… and Manage Toolbars… in the All Tools
drawer's menu open a dialog that lists the toolbars made with New Toolbar.
A name typed for the selected toolbar renames it, + copies the selected
toolbar or, with none selected, makes a new one, and the trash can deletes
it (https://helpx.adobe.com/illustrator/using/tools.html, Manage toolbars).
VectorCraft's own details:
- A rename applies at Enter, when the text box loses focus, or at OK. The
name follows New Toolbar's rules: not empty, at most 200 characters, and
not another toolbar's in any case.
- A copy is called "<name> Copy" (then "<name> Copy 2"), shows a little
below the toolbar it copies and below earlier copies; a new toolbar is
called "Toolbar N".
- Each change applies at once; deleting also removes the groups torn off
the toolbar.
- When the typed name is refused, a click on +, the trash can or another
toolbar is not applied, so the name can be corrected. When the selected
toolbar is deleted elsewhere while the dialog is open, none is selected.
- Renaming or deleting a toolbar closes the All Tools drawer and a group's
flyout open on it; a change of case only leaves them open, and the Tools
panel's flyouts and other toolbars' stay open.
- Each change shows under Window › Toolbars and is kept with the workspace.
New commands: window.toolbar.manage, window.toolbar.rename,
window.toolbar.duplicate and window.toolbar.delete, with catalog rows for
their labels in every language.
Docs: control-protocol.md, gaps.md, target-app-parity.md, ui-parity.md.
Part of #1759
With Preview on, the selected type on a path follows Effect, Flip, Align
to Path and Spacing while the dialog is open. Cancel puts it back with no
history step; OK keeps the previewed values as one undo step. Preview
starts off. The public pages list no Preview for this dialog, so this is
a VectorCraft choice, recorded as such in the parity docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Apply wheel steps over the closed family fields in Character, Properties and Control, preserving event order and one undo step per effective notch. Document the supported controls and the application choices. Fixes#5253.
Preferences > User Interface > Open Documents As Tabs was stored but did
nothing. With the box cleared, each document opened or created afterwards
opens in a floating window of its own, at the next cascade place, as
Window > Arrange > Float in Window floats it. Documents already open, and
documents open when the app starts, keep their tabs; checking the box
again leaves floating documents in their windows.
The engine records the preference on each document as it opens
(DocState::opened_as_tab), and the UI finds new documents by uid, so a
command batch that closes and opens documents, or changes the preference
between opening them, places each one as the preference was when it
opened.
While a symbol with Enable Guides for 9-Slice Scaling on is edited in
symbol editing mode, the canvas draws its two horizontal and two vertical
guides as dotted lines across its art, with any tool and with ruler guides
hidden. With the Selection tool the pointer near a guide shows the Move
cursor, and dragging the guide sets it through `symbol.options`'s
`nineSliceGuides` as one undo step; Escape during the drag puts it back.
A guide within 4 screen pixels takes the press before the art and the
bounding box. A dragged guide stays within the art's box and stops short
of the opposite guide; positions outside the art are not supported yet.
While Global Edit is on, a Shift-click (not a Shift-drag) with the
Selection tool on a highlighted match, or on an object inside a matched
group, leaves that match out: it is no longer highlighted and later
edits leave it as it is. The object the edit started from stays in, and
Global Edit ends when fewer than two matches are left. Leaving a match
out is not an undo step.
- New command `select.globalEditExclude {id}` returns `{active, count,
ids}`; the Selection tool calls it on the release of a Shift-click.
- `ToolContext::global_edit` gives the tools the Global Edit's objects.
- Label and messages in the i18n catalogs; docs/mcp.md,
docs/ui-parity.md and docs/target-app-parity.md updated.
Source: https://helpx.adobe.com/ph_fil/illustrator/how-to/global-editing-sensei.html
A double-click on a Radial, Grid or Mirror Repeat with the Selection
tool enters isolation mode on it. There its source art is selected and
edited as usual (a double-click on type in it switches to the Type tool
on that text) and every copy follows, the repeat keeping its settings.
Edit > Keyboard Shortcuts lists every Effect menu item under its menu
path and gives each one a shortcut (stored as effect:<id>, mapped to
effect.dialog {effect}, or effect.apply for an effect without options).
The menu shows it, and pressing it opens that effect's dialog for the
selection.
addon.color.swatchLegend replaces swatch.legend. The dialog sets columns, chip size, gap, the values shown
and whether to use only the swatches selected in the Swatches panel, with a preview; duplicate value
kinds are refused. The Swatches panel menu item is removed. Catalog rows in all 26 languages.
swatch.legend draws a grid of chips, one per colour swatch (the given
ones, else every one), each filled with and linked to its swatch and
labelled with its name and colour values (HEX, RGB, CMYK, Lab or
Grayscale; by default its own model; spot swatches marked), black on
light chips and white on dark ones, as one selected group in one undo
step. The Swatches panel menu's Create Swatch Legend draws the selected
colour swatches, else every one.
Action Options… opens the New Set and Set Options dialog, headed Action
Options, with the selected action's name; OK renames the action and keeps
its steps. The new command ui.action.rename {set, action, name} does the
rename and refuses an index past the last set or action or an empty name.
Part of #1629.
