- A file read for opening is laid out in the composite fonts registered
then. Opening a document and reverting the front one now measure again
the type set in a font named like a composite font that an open document
defines, the font database holds or the session registered earlier. Type
in other fonts, missing ones included, keeps the bounds it was read with.
- Switching to a document or closing the front one measures again the type
set in a composite font whose definition changed, and any type without
bounds.
- A document reverted while in the back measures its type in composite
fonts when it comes to the front, not in the front document's.
- Text holding an inline graphic whose symbol's type was measured again
takes the graphic's new size.
- A failed or panicked command puts the font database's composite fonts
back with the documents.
- Setting a composite font to the definition an export lends keeps it after
the export ends.
The remembered selection is now tied to the document it was made in, by its
uid, instead of being cleared on every tool reset: another view of the same
document, or closing an inactive tab, kept the anchors picked but made Copy
take the whole path.
A lent gesture that leaves the selection as it found it (a Cmd+Shift marquee
over nothing) is no longer recorded as a pick, so the Pen's last anchor stays
its own and Copy takes the whole path.
Also records #6123 in target-app-parity.md.
With the Pen or Curvature tool, Copy and Cut ignore the anchor selection,
so that the last anchor the Pen leaves selected doesn't make Copy take just
that anchor (#2122). Anchors picked with the Direct Selection that Cmd/Ctrl
lends those tools were ignored too, and the whole path was copied.
The session now remembers the selection the lent tool leaves when it gives
the tool back. While that is still the selection, Copy and Cut take the
picked anchors and segments, as with Direct Selection chosen.
Session::execute ran check_params only in the engine's own tests, so a
direct execute in a release build ran a misspelled key with the
command's default. It now checks every call, the commands a command runs
included, as MCP and the control port already did. A command.batch or
an action.batch is checked before its first step runs, and each step is
checked again as it runs, so an effect.setParams step is checked
against the effects the steps before it added.
Saved steps play through Session::replay, which takes keys a command no
longer reads, so an action recorded by an older version still plays and
Session::replay still plays an older journal. The Actions panel's Play
(Accelerated, Step by Step and Pause For, its function keys and
ui.action.play) and the Batch dialog use it.
Docs: the cmd/params.rs module doc, the Parameter keys section of
docs/mcp.md and a line in docs/target-app-parity.md describe both
paths.
A drag that takes a selected freeform gradient point out of the object previews its removal,
which deselects it. A dropped press now selects again the point that was selected once the
tool took the press, and Escape reselects a point dragged out and back inside the object.
A dropped press (a long touch, a canceled touch, a second finger) now
goes to the tool through Tool::drop_press, which takes Escape as during
a drag by default. The Pen, Smart Pen and Curvature tools override it
so the path being drawn goes on: they forget the press, and a Curvature
point the press dragged goes back where it was.
The release that follows runs only the tool's Cancel and Notify actions,
so a Selection marquee selects nothing and a Shift-drag Artboard marquee
toggles nothing. The engine puts back the persistent options the tool
had at the press (the Polygon tool's sides changed with the arrow keys),
and stores none of them.
An agent confined to automation roots could load the place cursor, with
file.place.queue or tool.setOption, and the files were placed later, by
a click of the person at the keyboard, outside any roots. tool.setOption
checked a queued path but not files given inline, whose linked files (an
SVG's referenced images) were then read with the keyboard user's
unrestricted access.
The session now keeps the automation roots in force when the cursor's
queue is loaded, and both the engine's own placement and the desktop
app's background placement read the queued file within them. A queue
loaded outside any roots places as before.
With View > Show Bounding Box on, a resize by a bounding-box handle
keeps the box and its handles drawn at the bounds the drag gives. A
move, a rotation and a corner-radius drag still hide the box until the
release (#712).
With Real-time Drawing off the document stays at the drag's snapshot,
so the box is measured from the drag's pending preview, through the
same cache as the deferred outlines.
While Caps Lock is on, the tools whose pointer General > Use Precise
Cursors changes show the crosshair, and the saved preference does not
change. The desktop app reads the lock state on macOS, Windows and
Linux X11 and passes each change to the new view.capsLock command. A
change to view.capsLock or usePreciseCursors through app.run refreshes
the canvas pointer. The view.preciseCursors command is labeled Use
Precise Cursors, so command search finds it by the preference's name.
Tracing a photo or a large image ran inside imageTrace.make on the UI
thread, so the window froze for as long as the trace took, with nothing
to say it was working.
A trace the user asks for (Object > Image Trace > Make and Make and
Expand, the task bar's Image Trace, the Image Trace panel's Trace and
presets) now runs on a thread of its own, as heavy plug-in filters do.
The status bar says so, and after 0.4 s a progress window shows how
many of the image's colors are traced, with Cancel and Continue in
Background (imageTrace.cancelRuns, imageTrace.hideRuns).
The result goes back to the command it was prepared for
(cmd::TraceRun, Traced::hand_in), which takes it only for the same
object, image and settings, so the edit is one undo step as before. A
newer trace of the same object replaces one still running, and a trace
whose image or settings changed meanwhile changes nothing. The control
channel, MCP, scripts and the web trace at once, as before.
The tracer reports its stages and color layers to a callback and stops
when it says so (trace_watched).
With nothing selected, a click with the Eyedropper picks up an object's attributes and an Alt/Option-click on another object applies them, as the reference app's Eyedropper does. Alt-click only copied from a selected object, and with nothing selected it failed. The session now keeps a copy of what appearance.copyFrom picked up last, and a reversed copy with nothing selected applies it.
The Blend tool kept its first pick, its clicked anchor and the blend it
was adding to through edits made outside the tool. Picking A, recoloring
other art and clicking B made a blend of A and B; undoing A's creation
left the next click doing nothing.
History::step names the current step by the serial numbers of the newest
undo step and the next redo step. The session keeps the active document's
uid and step from the tool's last pointer event and calls the new
Tool::history_moved at the next pointer event, or before drawing
overlays, when they differ. The tool's own edits are recorded after its
actions; a selection tool lent by Cmd is not told. BlendTool clears its
pick and chain there, as Escape does. A selection change keeps them.
When an undo scope that joined an open undo group was canceled, the
journal was cut back to where the scope began, but the group still
listed the cut entries' numbers. The next command took one of those
numbers, so a later cancel of the group also removed that command's
entry, even when it ran in another document, and a replay of the
journal no longer matched the documents. end_undo_scope now removes
the cut numbers from every open undo group's journal entries and batch
steps.
Highlight Substituted Fonts is now a preference in Preferences › Type,
next to Highlight Alternate Glyphs, on by default and saved with the
other preferences (`prefs.set highlightSubstitutedFonts`). The canvas
reads it through `RenderOptions::highlight_substituted_fonts` for every
open document; a document's own setup no longer decides it. File ›
Document Setup no longer shows the checkbox and keeps Highlight
Substituted Glyphs.
A file saved with Document Setup's Highlight Substituted Fonts off now
shows the pink highlight when it opens, while the preference is on.
The file still opens with the stored value, and saving it again keeps
that value.
`document.setup` no longer reports `highlightSubstitutedFonts`. It
ignores the key and adds a `warnings` entry that names `prefs.set` to
its reply, so an older reply passed back still applies its other keys.
The raster cache of type under a raster effect now also redraws when
Highlight Alternate Glyphs changes.
A command.batch that edited a document with an undo group and then a
document without one was dropped from the journal as a whole when the
group was canceled, so a replay lost the second document's edit, which
the session kept. Each batch step is now noted in the undo groups it
belongs to, by the same rule as a top-level command, and a cancel takes
only those steps out of the batch's journal entry. A step that changed
the active document becomes that change. Undo groups that stay open
follow the entry and step numbers that a cancel changes.
* Shortcuts: the keymap, overrides and dispatch come from craft-keymap
The editor's catalogue (commands, UI commands, panels, tools; one tool
group per tool; show/hide commands marked as toggles) builds a
craft-keymap Keymap. UiState::shortcut_overrides is a craft_keymap
Overrides stored through keymap::stored, which writes the same map of
entry key -> one string as before, with panel: keys and VectorCraft's
spellings, so earlier versions read the file; a value that is not text
drops that entry instead of every preference.
Key presses run through craft_keymap's Dispatcher with accept filters:
keys that type text go to the one-key text path, and while the Type
tool edits only command-key chords run. Held keys repeat. Conflicts
and assignment use the crate's conflicts and set_bindings. Extra Shift
no longer falls back to the chord without it.
* Shortcuts: .kys import matches and applies through craft-keymap
The review proposes targets with craft_keymap's namematch, and Apply
hands the ready rows to craft_keymap::plan as one set, each row's
target passed as the remembered answer for its entry. The later row
takes a chord, and commands outside the set lose the chords the set
gives. Rows with one name in one block keep their own targets.
The engine's own namematch module is removed.
* Shortcuts: Cmd+, beside other hits, web Mac platform, cached dialog view
- Pin craft-keymap at 362eb59f.
- Cmd+, opens Settings on a Mac after the frame's other shortcuts run, with the
Mac read from egui's OS; drop settings_chord, which dispatch no longer used.
- The web build follows the browser's OS, so Ctrl stays Ctrl on a Mac.
- The Keyboard Shortcuts dialog keeps its keymap, row texts and conflict count
between frames while the working set is unchanged.
- Every default shortcut text becomes its entry's binding (test).
- craft-keymap counts as a UI crate for the layer check.
- Translate "too many changed shortcuts"; the parse error reuses the existing
"can't parse shortcut `{c}`" message.
* Shortcuts: the chords the operating system takes can't be assigned
The keymap reserves craft_keymap::reserved::system for its platform:
window switching and closing, and the virtual consoles off the Mac.
The Keyboard Shortcuts dialog and shortcuts.set refuse them with
"<chord> is reserved by the system", and a saved override on one keeps
the entry's default. No default shortcut uses a reserved chord.
* Shortcuts: craft-keymap at craft-libs 2eca9b3a
craft-keymap comes from storytold/craft-libs (craft-libs #164 and #186), at the rev craft-pdf
already uses. The web build keeps the browser's full platform, so Windows browsers get Windows'
reserved chords, and each platform caches its own default keymap.
A misspelled parameter key got a did-you-mean suggestion, but a
misspelled command id only got "unknown command `select.al`", through
the CLI, MCP and the control channel alike. Session::execute now names
the nearest command id, using the same matching as parameter keys
(ignoring case), and action.batch does the same for an unknown step. An
id with no near match keeps the plain error.
The matching skips candidates whose length differs by more than the
allowed number of edits, so a very long unknown command id or parameter
key is answered at once instead of being measured against every command
id or accepted key.
The new message has a row in every catalog, and docs/mcp.md's
Parameter keys section shows it.
A document opened or created between edit.undoGroup.begin and
edit.undoGroup.end opens an undo group of its own with the begun
group's name, so an atomic command_batch that starts with file.new or
document.open is one undo step in the new document. The group opens
after the command that opens the document: when that command also
edits it (a command.batch), those edits stay the command's own undo
step, and a canceled group keeps them, so the journal still replays.
Both commands also run with no document open, and a command.batch that
fails rolls back a begun group. Switching to a document that was
already open does not open a group in it.
document.find took only name, kind and text, so removing hairline slivers or
every object in one region needed the whole inspect tree and a filter
written outside the app. It now also takes within and intersects
([x, y, width, height] in document points), min and max width, height,
thickness (the smaller side) and area of the geometric bounds, and min and
max anchor count (a compound path counts its members together). Each given
filter must match, and limits are inclusive.
select: true also selects the matches, leaving out hidden and locked
objects, matches inside another match, and compound path members unless
the compound path is isolated; the reply adds selected. Select > Reselect
repeats the find, and an action being recorded records a find that
selects. The count that select.color, the Select > Same commands and the
Select > Object commands report is now the number of objects selected,
after Lock Guides leaves out guide paths.
A save without options reuses the options the document was last saved
with in that format. Their artboard, artboards and range name artboards
by number, so once artboards were deleted or moved, the save wrote
other artboards or was refused: with three artboards, a PDF saved with
range "2" wrote the third artboard after the first was deleted, and one
saved with range "1, 3" was refused after the third was deleted. The
same held for SVG saves, a legacy .ai, and .ai and native files saved
with separateArtboards. file.formatOptions and SVG Options showed the
same numbers.
The document now keeps the ids of the artboards it had when it was
saved, and the remembered pick follows them: an artboard deleted since
is left out, one that moved is named by its new number, and the rest of
the pick is kept. A range open at its end ("2-") is written out as the
artboards it named once artboards are added. When none of the artboards
the save used is left, the pick is left out, and the save writes the
artboards it writes when none is named. A range of "all" stays as it
is. An artboard given to the save is still refused when the document
does not have it.
A new artboard no longer takes the id of an artboard deleted earlier in
the same document (Document::retire_artboard_id), or of one an undo took
away: the highest id given out is shared with the undo history, so a
new artboard is not taken for an earlier one.
file.revert keeps the pick only when the file read back has the
artboards the document had at the save, with the same ids in the same
order. A PDF saved with a range holds only those pages, and one saved
without preserveEditing reads back with new ids in page order, so their
picks are left out.
CodeRabbit findings #7, #72, #92, #94, #95, #99, #100, #140, #158, #174:
- Link search hashes at most the size it looked at (a growing file no longer matches).
- Resolving links reads, decodes and previews each linked file once, shared by every key.
- Placed documents read inside one another resolve links at most 8 deep, never one already
being read.
- A data set's image path and the placed-document rereader follow stored paths through
`document_path` (no other computer's share).
- The Links panel looks at a linked file within the roots of the automation caller that
opened the document.
- A fonts folder set by a confined caller is scanned without following links out of it.
- Recovery refuses an area folder that is a link or another account's.
- Atomic saves keep the replaced file's group and Linux access ACL, or make the replacement
owner-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dotCooCoo