Store corner radii as fractions of each corner's max so rounding scales with the shape; expose via Corners dialog and object.setLiveShape relativeRadii.
Co-authored-by: Cursor <cursoragent@cursor.com>
Illustrator links type in an area or along a path (https://helpx.adobe.com/illustrator/using/manage-text-area.html); until now only area type threaded here. Type on a path that overflows ends its line where its text stops fitting, so a story flows on from it, and its red out port, just past its end bracket, loads the Selection tool with the text as area type's does. A new frame threaded from it at a point is type on a path of its shape.
With Use Preview Bounds on, a bounding-box handle drag scaled the art by
the ratio of the visual box, so margins that stay (a stroke with Scale
Strokes & Effects off, an Offset Path reach) or scale by another factor
moved the opposite visible edge: dragging the right edge of a square with
Offset Path 10 from 210 to 310 left its left edge at 98.33 instead of 90.
The Selection tool now previews object.setBounds with the dragged visual
size and the opposite handle (with Alt, the center) as the reference
point, so the scale is solved from the geometric box and the margins the
visual box adds, for strokes with Scale Strokes & Effects on or off and
for geometry effects. Shift and Alt drags follow the same rule; a drag
that flips the box, and one with anchors selected, still scale by the
matrix. A previewed object.setBounds runs as object.transform with the
transform it finds, so Transform Again repeats the drag and the journal
holds that transform. The drag transforms a path of a compound path
selected on its own, as object.transform does, and leaves the art at
least 1e-4 of its width and height.
With Use Preview Bounds on, every hover frame's cursor and every
pointer move measured the selection again, and with Smart Guides on
each selected object too, evaluating their geometry effects each time.
The session now keeps a PreviewMemo, which ToolContext::preview_memo
passes to the tools. selection_bounds, selection_box and the object
bounds that Smart Guides find centers in while hovering read it. The
memo holds the measurements for one key: the document's uid and
revision, the selected objects and Use Preview Bounds. A new key
replaces them. VectorcraftApp::selection_box in the UI keys on the
uid, the revision and Use Preview Bounds. A ToolContext without a
memo measures on every call.
With Use Preview Bounds on, the bounding box, the Transform panel,
Align, Distribute, Distribute Spacing and object.setBounds measured
each object without its geometry effects. A square with Offset Path
10 measured as the square, and type with Outline Object measured by
its layout box instead of its glyphs.
The new vectorcraft_effects::preview module measures objects as they
are drawn. A path is measured by its effected shape, with the
geometry effects of each fill and stroke that paints. Type, images,
live objects and symbol instances are measured by their reshaped art.
A group or layer with geometry or Pathfinder effects, or with a fill
or stroke of its own that has geometry effects or paints members with
geometry effects, is measured by its evaluated art. A blend, envelope
or repeat whose objects have geometry effects is measured by its
evaluated art, with those objects measured after their effects. Raster
effects are not measured. In one object, the art of at most 4,096 symbol
instances is measured with its geometry effects, and the other
instances are measured without them. With Use Preview Bounds off, the
measures are unchanged.
object.setBounds sizes objects with geometry effects by measuring
them after each scale it tries, so type with Outline Object set to
100 pt wide gets a glyph box 100 pt wide.
Selection::anchors_box is split out of Selection::anchor_bounds. The
doc comment of VectorcraftApp::selection_bounds said that it includes
effects; it now says that it leaves them out.
With View › Snap to Grid on, a whole object moved with the Selection,
Group Selection or Direct Selection tool landed on the grid by
whichever of its two edges or its center was nearest a gridline on
each axis. An object on the grid whose width is an odd number of grid
steps has its center half a step between gridlines, so a short drag
could pull it half a step off the grid: on a 20 pt grid, a 100 pt
square at (100, 100) dragged by (8, 8) moved by (10, 10).
A move now lands the nearer of the two edges on a gridline on each
axis, as the reference app's help describes, and the center no longer
snaps. The square above stays at (100, 100). This changes the rule #769
chose for #740. The plain move and the Shift-constrained one both use
grid_pull, so both change.
Docs: docs/target-app-parity.md (Drawing aids).
The selection tools' clipping-path outline hit was also used where the
Selection and Direct Selection tools act on what is drawn rather than
select. Near a layer's clipping mask edge, with art drawn over it:
loaded text threaded into the unpainted mask instead of the art, a
double-click on type entered isolation on the mask instead of editing
the type (Selection) or did nothing (Direct Selection), and Cmd/Ctrl+
Shift double-click could not release a guide path there. These now
take the ordinary hit (ToolContext::hit_options); a press or hover
that selects keeps the outline hit.
Tests (each fails with the selection hit options):
select::tests::loaded_text_threads_into_the_art_on_a_layer_masks_edge,
a_double_click_on_type_at_a_layer_masks_edge_edits_it (Selection and
Direct Selection) and a_guide_on_a_layer_masks_edge_is_released, over
the new testutil helpers add_masked_layer and
doc_with_type_on_a_layer_masks_edge. Recorded in
docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A clip group answered a press only strictly inside its clipping path,
and there the art above the path came first in the hit test, so where
the clipped art extends past the mask's edge the clipping path's
segments could not be reached on the canvas.
With the new HitOptions::clip_outlines, which the Selection, Direct
Selection and Group Selection tools set
(ToolContext::selection_hit_options), a press within the selection
tolerance of a clipping path's outline, inside or just outside it,
hits the clipping path (HitKind::Outline) before the art it clips:
Direct Selection takes its segments and the Selection tool the clip
group. It applies to a clip group's clipping path and to a layer's
clipping mask, and only to one a click may hit (may_hit: visible,
editable, within reach). Inside the mask the art is hit as before.
The other tools, which act on what is drawn (the eyedropper, type,
gradients...), leave the option off, and hit_test_visible never
applies it, so they still take the art at the mask's edge rather
than the mask's empty appearance. Select Behind's one-pass walk takes
a layer mask's outline first too, so it lists what the repeated hit
test finds. Object Highlighting and a right-click's selection in the
canvas (selection_hit_at) take what those tools take; dropping a
swatch on art still hits what is drawn.
The reference app reshapes a clipping path with Direct Selection:
https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-clipping-masks.html
Tests in doc: a_clipping_path_is_hit_on_its_outline_before_its_art,
only_the_selection_tools_hit_a_clipping_path_on_its_outline and
select_behind_takes_a_layer_masks_outline_first; the random Select
Behind test now clips layers and sublayers and sets clip_outlines,
and fails without the Select Behind change. In tools,
a_press_on_a_clipping_path_takes_its_segment_over_the_art fails
without the change; select::a_press_on_a_masks_edge_selects_its_clip_group
fails when the Selection tool uses the plain options; the eyedropper
copies the art on the edge. Recorded in docs/ui-parity.md,
docs/gaps.md and docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A lone object selected with ruler guides can be the key (the Selection
tool's click on it), and Align to the key moves the other selected
guides to its edge or centre: vertical guides to left, centre or right,
horizontal ones to top, centre or bottom. Parallel guides line up on a
key guide. Aligning to the selection or the artboard leaves guides alone.
Tools that showed distance or angle overlays during drags now respect the
Units preference, consistent with shape and selection tools.
Co-authored-by: Cursor <cursoragent@cursor.com>
Match corner-radius and pie-widget drags: the Selection tool reports a transforming drag so the canvas drops the sharp selection box during bracket moves.
Co-authored-by: Cursor <cursoragent@cursor.com>
Smart Guides spacing now applies when scaling with the Selection and Free Transform tools, not only on moves.
Co-authored-by: Cursor <cursoragent@cursor.com>
A move that Shift kept level, upright or on a diagonal left that line
when it snapped. With View › Snap to Grid on, a level Shift-drag also
moved the selection up or down onto a gridline, and Snap to Pixel,
Smart Guides and Snap to Point moved it off the line in the same way.
Each axis snapped on its own after Shift had constrained the move.
With the Selection tool, and with Group Selection and Direct Selection
moving whole objects, a Shift-constrained move now slides along its
line until it snaps. With Snap to Grid or Snap to Pixel, the move
slides along the line by the shorter of the two distances that put it
on a gridline or a whole pixel on either axis. The bounds line up with
the other objects, or space evenly with them, only on the axes the line
runs along, and the grabbed point stops where the line passes an anchor
or crosses a ruler guide. A level or upright move snaps along its own
axis only. Moves without Shift snap as before.
Docs: docs/target-app-parity.md.
A bounding-box handle dragged with the Selection or Free Transform tool
snapped only with Smart Guides on, and then only to the other objects
and the artboards. View > Snap to Grid, Snap to Pixel, Snap to Point
with Smart Guides off and the ruler guides did not move it, while a
move snaps to all of them.
The corner or side a handle moves now snaps as a dragged point does.
With Snap to Grid on it lines up with the nearest gridline, and with
Snap to Pixel on it lines up with whole pixels. With Smart Guides off,
Snap to Point lands it on the other objects' anchors and on ruler
guides within its distance. With Smart Guides and Snap to Point both
on, it lines up with the ruler guides as well as with the other
objects. Shift still keeps the proportions. Without Alt the opposite
side stays put, and with Alt the box still scales about its center.
Docs: docs/target-app-parity.md.
In a rotated view the resize and rotate cursors were the ones for an
unturned view. With the view turned 90°, the right-middle handle of a
selection's bounding box shows at the middle of the box's bottom edge
and drags up and down, but its cursor was the left-right arrow. This
affected the Selection, Free Transform, Artboard, Slice Selection, Crop
Image, Perspective Grid and Perspective Selection tools, ruler guides,
and the spread handle of a freeform gradient.
Now each of these cursors turns with the view to the nearest 45°. The
Selection tool and the Perspective Selection tool turn the handle's
direction by the view's angle before they round it to a cursor.
ToolContext::view_angle reads the view's angle from the screen frame,
and Cursor::turned turns a resize or rotate cursor by it. The new
Cursor::rotate_about_in_view turns the pointer's direction from the
center by the view before it picks one of the rotate cursor's eight
directions. Cursor::rotate_about keeps its signature and behavior. At
0° every cursor is as it was.
Docs: docs/target-app-parity.md.
A double-click on a ruler guide with the Selection, Direct Selection or
Group Selection tool did nothing, whatever keys were held. A guide could
be released only with View › Guides › Release Guides.
With the Selection, Direct Selection or Group Selection tool, a
double-click with Cmd/Ctrl and Shift held now runs view.guides.release
on the ruler guide under the pointer (index) or, when no ruler guide
is there, on the guide path under it (ids). Nothing is released while
guides are hidden or locked, and a double-click without both keys does
what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Selection tool shows two pie widgets just outside a selected live
ellipse while the bounding box shows: one at the Pie Start Angle and
one at the Pie End Angle. Dragging one sets its angle to the angle of
the outline's point that lies in the direction of the pointer from the
ellipse's center, in one undo step, through `object.setLiveShape`'s
`pieStart` or `pieEnd`. Double-clicking one makes the ellipse whole
again (0° to 360°). Where the two widgets coincide, as on a whole
ellipse, a press takes the End widget.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
A Selection tool marquee selected every object it touched, a Group
Selection marquee selected the anchors inside it, and E pressed during
the drag did nothing. Now E switches either marquee to selecting only
the objects that lie entirely inside it, measured by their geometric
bounds, and E pressed again switches it back. Each marquee starts in
the default mode.
- The Selection tool selects a group only when the whole group lies
inside. Group Selection selects the objects inside groups, each as a
whole object. Shift still toggles. Direct Selection does not take E.
- The ruler guides the marquee selects with the art are limited the same
way: an artboard guide is selected when its whole length lies inside,
and a canvas guide is not selected.
- Tools receive letter keys as ToolKey::Letter. While a tool is busy, the
desktop app sends it each press of a letter it claims, without Cmd,
Ctrl or Alt and without key repeats, and headless press_key sends a
claimed letter the same way. With nothing dragged, press_key {key: "e"}
still chooses the tool bound to E.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group had no arrow widget for switching between Face Selection
and Construction mode.
With the Shaper or Selection tool active, a selected Shaper Group, or a
group with one of its faces selected, now shows an arrow beside the
middle of the right side of its source shapes' bounds. A click on it
isolates the source shapes (object.isolate). A second click leaves
isolation with the group selected (object.exitIsolation). The arrow
points right in Face Selection mode and left in Construction mode.
In Construction mode a Shaper click selects an original shape of the
isolated group. Before, it selected the whole group outside the
isolation, and shaper.select with source could pick an original of
another Shaper Group lying above it.
Docs: docs/shaper.md, docs/target-app-parity.md.
The Control bar had no isolation controls. In isolation mode it now
shows an Exit Isolation Mode button (`object.exitIsolation`), except
while a pattern is edited: the isolation bar's Done and Cancel end
that edit. Outside isolation mode, with one group, compound path,
path, image, mesh or placed file selected, it shows an Isolate
Selected Object button (`object.isolate`). After a Direct Selection
click on a path inside a group, the button isolates that path. An
envelope's contents get no button: for them the Control bar shows the
envelope's Edit Envelope and Edit Contents buttons.
The button offers the kinds of object that the Selection tool's
double-click isolates. The double-click's check moves unchanged into
`vectorcraft_tools::select::isolates`, and both use it.
Docs: docs/target-app-parity.md.
With Double Click To Isolate on, the Selection tool isolated groups only. A
double-click on a single path, compound path, image, mesh or placed file now
isolates it too, as the public documentation describes. Type still switches to
the Type tool; blends, envelopes, repeats and symbol instances keep their own
editing modes.
While a single object is isolated only it is hit, marqueed and taken by Select
All, new art goes beside it in its group or layer, and a double-click on the
empty canvas leaves with it selected. object.isolate accepts any object except
type.
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
With Smart Guides off, the Selection tool grabbed the selection by the
pressed spot, so Snap to Point brought the pointer onto another anchor
while the object's own anchor stayed a few pixels off. A press within
reach of an anchor now grabs the object by that anchor (Smart Guides on
or off, also without a hover event first), and the arrow turns hollow
over such an anchor while Snap to Point is on.
Fixes#1274
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Agents could set and clear the key object but not read it:
document.inspect, the control channel's ui.pointer reply and the
headless pointer_gesture reply left it out, and select.key returned
null. select.key with an id that was not selected, or with a value
that is not an id, such as "x", cleared the key without an error. A
compound-path member or an object inside a selected group could become
the key.
select.key now checks its id as select.set, select.add and
select.toggle do (#784). It returns an error for an id that is not a
selected top-level object and leaves the key as it was. Layers,
compound-path members and objects inside another selected object are
not top-level objects. select.key {id: null} used to clear the key and
is now an error; select.key {} still clears it. select.key returns
{key}, and document.inspect and both pointer replies include the key
object as "key".
In isolation mode a Selection-tool click can pick an object that
select.key does not accept as the key: a sublayer inside an isolated
layer, a member inside an isolated compound path, or an object in an
isolated group that is also selected. The tool no longer sends
select.key {id} for such an object. When the object is already the
key, the tool still sends select.key {}, which clears the key.
A recorded action whose select.key step names an object that is not a
selected top-level object when the action plays now fails and is
rolled back, as an action with a select.set step naming a deleted
object has failed since #784.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md.
With Smart Guides on, a selection moved by the Selection tool only lined
its bounds up with the other art: grabbed by an anchor and dropped near
another object's anchor, it could stop a fraction of a point beside it
where an edge lined up instead. When the grabbed point comes within the
snapping tolerance of an anchor or a centre, it now lands on it, as
Smart Guides' anchor snapping does.
The snap targets of a copy were gathered when Alt went down, from the document
as previewed, where the original had already moved with the drag, so the
original was never a target where it stays. Now both target sets (for a move,
and for a copy, which includes the original) are gathered when the drag
begins, and Alt picks between them each frame: for Direct Selection drags by
an anchor and for whole-object moves (the Selection tool's, and Direct
Selection's from a segment or fill).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Beside every corner of the bounding box the curved rotate cursor bowed
up. It now bows from the box's centre toward the pointer, in 45° steps
(Cursor::RotateToward, made by Cursor::rotate_about): at the top right
it opens toward the bottom left, at the bottom right toward the top left.
The Selection tool shows it over the rotate zone and while rotating (it
follows the pointer round), and Free Transform does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Smart Guides on, hovering the Selection tool near an object's centre
or one of its anchors now labels it ("center", "anchor"), as
Illustrator does, and a press there grabs the object by that point, so
the point follows the pointer and snaps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With View › Snap to Grid on, a selection moved with the Selection, Group
Selection or Direct Selection tool lands on the grid: on each axis,
whichever of its two edges and its centre is nearest a gridline (every
subdivision, 9 pt by default) moves onto it. Snap to Grid takes over from
Smart Guides and Snap to Point while it is on, as it does for drawn points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
During a Selection-tool drag the bounding box and its handles stayed on
screen while the art moved, so the content looked as if it slid inside
a box of its own. The box now hides once a drag moves, scales or
rotates the selection, as in Illustrator, and comes back on release. A
press that hasn't moved, and a marquee, keep it. Tools gain
`transforming()` (Session::tool_transforming) for this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selection moved with the Selection or Direct Selection tool that lines
up with nothing along an axis lands as far from its neighbour as two
other objects of its row (or column) are apart, or halfway between its
two neighbours, within the snapping tolerance; the equal gaps are marked
with a line and end ticks in the Smart Guides colour. The objects are
taken as wholes on their layers (groups too), and inside a group holding
the selection, its other objects. Off, moves only line up as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Selection tool, a click (no drag, no modifier) on one object of a
selection of several makes it the key object (select.key); a click on the
key again lets it go. The key object is drawn with a thicker outline,
Align aligns to it (the Align panel shows Align to Key Object while there
is a key, and choosing Selection or Artboard lets it go), and
object.align without `to` aligns to the key when there is one, so the
Control bar's and the Properties panel's Align buttons do too. With a
spacing, Distribute Spacing keeps the key object still and spaces the
others from it, and it reports too few objects instead of indexing an
empty list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Corner widgets only ever showed on live rectangles: CornerWidgets::of bailed
out unless the selection's live shape was LiveShape::Rectangle, and
object.setLiveShape only edited rectangle radii. A star is a plain path, so it
had no widgets with either selection tool.
- geom::corners: the corners of any path (anchors without handles between two
straight sides) and the path with them cut round, inverted round or
chamfered, each corner a circle tangent to both sides, its radius no larger
than takes the cut halfway along its shorter side. Rectangles now cut their
corners with it (bit-identical anchors and layout).
- doc::corners::LiveCorners/set_corners: one model for a live rectangle's,
a live polygon's (new radii/kinds) and any other path's corners (new
LiveShape::Path keeping the uncut outline, plain again once nothing is cut);
radii scale with transforms (Scale Corners) and stay circular.
- object.setLiveShape takes anchor indices for `corners` on any path; polygons
keep a shared radius as their sides change.
- Widgets: Direct Selection on any path, Selection on live rectangles and
polygons; placed on each corner's bisector, the drag follows it, the red
limit outline marks corners at their own limit; the angle preference and
View > Hide Corner Widget apply. Corners dialog and the Properties and
Transform panels' Corner Radius (now on polygons too) work on them.
- Tests for the star, the polygon and a pen path in geom, doc, tools, engine
and ui-egui; docs and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Shift-drag marquee only ever added to the selection, so there was no way to
take some of the selected objects out with it. As in Illustrator, Shift-drag
now toggles what the marquee reaches: the selected ones are deselected, the
others selected, the rest of the selection stays.
- Selection tool: the Shift marquee runs select.toggle, which now also takes
{ids} (each one toggles).
- Direct Selection and Group Selection: the Shift marquee toggles the anchors
inside it (select.anchorsMany mode "toggle"); a path left with none leaves
the selection, one with all of them is selected whole again.
- select.anchorsMany takes mode "set"|"add"|"toggle"|"subtract" (add: true is
still mode add). Adding anchors of a path selected whole keeps it whole, and
anchor references outside the path are ignored.
- Lasso: Shift adds and Alt subtracts through the same command, so an Alt lasso
no longer drops selected type, groups and other non-path objects.
- Tests at the tool, engine (Session::pointer) and MCP (pointer_gesture) levels,
command sweep cases for the new modes; docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discord feedback: type in a frame dragged with the Type tool could not be resized or switched
between area and point type the way the reference app allows.
- The Selection tool shows the type widget beside a single selected point or area type object:
a small circle outside the middle of its bounding box's right side, hollow on point type and
filled on area type (vectorcraft_tools::typewidget, drawn by the canvas from the same geometry).
Hovering it shows the arrow with a type badge; its clicks neither drag nor deselect, and a
double-click runs type.convertToAreaType / type.convertToPointType (the Type menu's commands),
keeping the text and its styles in place, one undo step, reachable over MCP.
- Resizing area type made by dragging already works on main (#252): the bounding box resizes the
type area and the text reflows. A regression test now covers the reported flow.
- docs/mcp.md and ROADMAP.md describe the widget.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color, Alignment Guides, Anchor/Path Labels, Measurement Labels,
Transform Tools, Object Highlighting and Snapping Tolerance are read:
- tools: `guides::GuideStyle` on `Targets` (`styled(cx)`) colours the
lines and labels and leaves them out when their option is off, the
snap itself unchanged; `ToolContext` gains the six fields and
`snap_tol()`, replacing the 5 px literal for every smart guide snap
(drawn points, moves, bounding-box handles, ruler guides, artboards,
reference points). The tools gate their `Overlay::Measure` readouts on
Measurement Labels (drawing, moving, ruler guides, artboards) or
Transform Tools (scaling, rotating, Free Transform, transform tools).
- engine: `with_tool_cx` fills them from `Prefs` (the colour parsed, magenta
as fallback); the colour's default is `#ff3dfc`, what the tools drew.
- ui-egui: the hover outline needs Object Highlighting and Smart Guides.
- Tests in tools (guides, select), engine (tests_prefs) and the canvas;
docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
