Picking the two points of a Linear dimension snapped to anchors and to the
line under the pointer, but showed no guides and ignored the art around it.
The picks now go through the drawing tools' Smart Guides (DrawSnap), hovering
too, so the guides show before each click: a point slides into line with other
objects' anchors and centres, and the second onto the construction guides
through the first. An anchor of the line under the pointer still wins (it
links the dimension to that path), then a guide, then the closest point of the
line (#2432). The guides go once the dimension is being placed.
Test: linear_picks_show_and_snap_to_smart_guides (fails on the old tool, which
showed no overlays while hovering). docs/dimensions.md updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With model "keep" (the default), a row whose new color is in another
color model gives linked art the color converted into the art's model.
That art no longer stays linked to the rewritten group swatch, which
holds the color in its own model, and the reply's note reports the
conversion.
When recolor.apply with a group rewrites a global swatch with another
color than the row of the art linked to it, and that row leaves the art's
color as it is, the art now keeps the row's color and is no longer linked
to the swatch. Before, the link stayed and the group's rewrite gave the
art the swatch's new color.
Art linked to a global swatch of the group that recolor.apply rewrites stays
linked when the swatch takes its row's new color: it shows that color at its
tint, and a later swatch.edit still reaches it. Before, the art took the new
color unlinked. With group, the reply adds relinked, the count of other linked
paints that followed the group's new colors.
With Use Artboards and two or more artboards, EPS export now writes a
central file under the path's own name before the file of each artboard.
The central file contains the whole document, and its bounding box is
the visible art, as in an export without Use Artboards. An export of a
single chosen artboard still writes one file at the path's name, and
Export for Screens still writes one EPS per artboard. When no art shows,
only the artboard files are written.
Docs: the useArtboards params text, the MCP export tool's range text,
docs/mcp.md, docs/control-protocol.md and docs/target-app-parity.md.
document.find took only name, kind and text, so removing hairline slivers or
every object in one region needed the whole inspect tree and a filter
written outside the app. It now also takes within and intersects
([x, y, width, height] in document points), min and max width, height,
thickness (the smaller side) and area of the geometric bounds, and min and
max anchor count (a compound path counts its members together). Each given
filter must match, and limits are inclusive.
select: true also selects the matches, leaving out hidden and locked
objects, matches inside another match, and compound path members unless
the compound path is isolated; the reply adds selected. Select > Reselect
repeats the find, and an action being recorded records a find that
selects. The count that select.color, the Select > Same commands and the
Select > Object commands report is now the number of objects selected,
after Lock Guides leaves out guide paths.
Every change in the Image Trace panel traced the selected Image Trace
object again at once, and there was no way to adjust several settings
first and trace once.
The panel now has a Preview checkbox before Trace. It is on by default
and kept with the UI preferences; Reset to Default leaves it. With
Preview off, setting changes wait in the panel until Trace applies them
as one undo step, or until Preview is turned on again. When Preview is
turned on with no Image Trace object selected, the object is traced
with the waiting changes when it is selected again. A change of view
keeps the waiting settings, and selecting another Image Trace object
shows that object's own settings. The control channel's ui.set takes
imageTracePreview.
To check what it kept for a live object, or for effect art made from
live objects, type or symbols, the renderer walked the object in every
frame to hash the symbols, patterns and placed files it shows, and it
looked up each symbol instance it found by name in the list of every
symbol. At 1000 x 1000 pixels, the walk took most of the frame on a
page of 2,000 envelopes around instances of the last 2,000 of 10,000
symbols: 83 ms a frame when every frame walked them.
The renderer now keeps what the walk found with the node, which it
holds weakly, and with the document's symbols and patterns as the walk
read them. A later frame makes the key from what was kept while the
node and the document's symbols and patterns stay the same, and walks
the node again when any of them changes. A walk that finds a placed
file is not kept. An evaluation that the live cache does not keep, such
as a thumbnail's copy, is no longer walked. The same page now takes
30 ms a frame, with the same pixels.
Docs: docs/target-app-parity.md
Brush art leaves out the symbol instances and pattern paints whose art
draws a brushed stroke. The brush cache now records whether a brush's art
or the stroke's paint can show a symbol or a pattern, and drops those
entries when the art of the document's symbols or patterns changes, so an
edit that makes a symbol or pattern start or stop drawing a brushed stroke
draws as a new renderer does.
The parity line gives the median and fastest-frame figures of the
benchmark for both documents it names.
The renderer kept brush art per node id and stroke. The copies drawn
for symbol instances, inline graphics and repeat copies share their
art's ids, so they replaced each other's brush art and it was made
again in every frame. The pieces were drawn as plain nodes, so brush
art that is a live object, such as an envelope that a scatter brush
places, was evaluated again in every frame, for a path on the page too.
The brush cache now also keys brush art by the stroked path, so each
copy keeps its own. Kept pieces are drawn through the renderer's
caches: their stroke outlines, live-effect geometry and live object
evaluations are kept between frames. Each frame draws what a new
renderer draws. On one thread at 1000 x 1000 pixels, 2,000 paths on
the page whose scatter brush art is an envelope took 400 ms a frame on
main and take 94 ms, and the fastest frames of 2,000 instances of a
symbol whose art is a brushed path went from 16 ms to 12 ms, with the
same pixels.
Docs: docs/target-app-parity.md
The title field of document.inspect and the document.open reply is the
document's tab name, which comes from the file name once the document
is saved to or opened from a file. A client had to call file.info or
document.info to read the File Info title, so reading a saved
document's title from these replies gave the file name instead.
Both replies now add fileInfoTitle, the title file.info reports, and
keep title as it was. docs/mcp.md's File Info section describes both.
With --connect, open_file, save_file, export and screenshot {path} sent a
relative path to the app unchanged, and the app resolved it against its
own working directory (/ when started from the Finder). A relative path
then named a different file than it does headless, where the server
resolves it against its own working directory.
The server now makes these paths absolute against its working directory
before it sends them, including export's options.path and the path a
screenshot reply reports. Paths inside run_command and command_batch
params go to the app as given. docs/mcp.md describes the rule.
ui.render, which render_preview and screenshot call in the headless
session and in the app, rendered the artboard with the canvas options:
8-bit compositing and edges smoothed shape by shape. A PNG export
composites in floating point and supersamples edges, so the preview
showed edge colors the exported file does not have, most visibly where
shapes meet edge to edge.
ui.render now renders with the options of a PNG export on white, so
its pixels equal the export's at the same scale. render_preview also
no longer enlarges an artboard smaller than max_side: with the default
max_side of 1024, a 612 x 792 page came back as an interpolated
791 x 1024 image, and it now comes back at 612 x 792. docs/mcp.md and
docs/control-protocol.md describe this.
imageTrace.make and imageTrace.makeAndExpand checked their own keys, but
not the keys inside `params`. A misspelled setting such as `colours` was
dropped, and the trace ran with the preset's value and no error.
A key inside `params` that is not a trace setting is now an error that
names the nearest setting, as for a command's own keys. Errors from
imageTrace.makeAndExpand, including those for `enhanced` and a missing
swatch library, name that command instead of imageTrace.make.
A pixel on the edge of a cut-out image with an alpha of 128 or more was
traced with its own color. When that color was a darkened edge tone, it
took whichever palette color lay nearest, and the edge traced as 1 px
slivers of a color that appears nowhere near it.
In Color and Grayscale, a pixel with an alpha of 128 to 254 next to a
pixel under half opaque now takes a color of the fully opaque pixels
within two pixels of it when its own color is that color or a darker
shade of it, counting only pixels it reaches without crossing a
transparent gap; of several such colors, it takes the one the most of
those pixels have. It keeps its own color when one of those pixels has
it, or when its color is not a shade of any of theirs, so a thin
semi-transparent outline of another color stays as it is. Ties go to the color nearest its own, by its gray
in Grayscale. Opaque images trace as before.
recolor.colors and recolor.reduce were unavailable with nothing selected, so
listing a document's colors needed a select.all first, which also changed the
selection. Both now take ids and read the selection when ids is left out.
With nothing selected they read the objects Select All takes and the objects
inside them: hidden and locked objects are left out with what they hold, also
inside a group, as are the objects of hidden, locked and template layers, and
in isolation mode only the isolated art is read. The selection is left
unchanged. An object named in ids or selected is read with everything it
holds, and an object listed twice, or listed together with a group that holds
it, counts once. recolor.apply still recolors only the selection.
Fitting straightens the pieces of an outline that lie close to a line, and
Snap Curves To Lines straightens more of them. The outline of a single
pixel, or of a region one pixel thick along an edge such as an opaque row
of a mid tone under a light shape, can then have all its pieces on one
line. The trace held a selectable path with no area, for example a path
140 x 0 px with Snap Curves To Lines.
In a Color, Grayscale or Black and White trace with Fills, a fitted
outline or hole whose area is below 1e-6 px^2 is now left out. A path
with no area paints nothing, so the traced result paints the same pixels
as before. Without Fills, the 1 px stroke that outlines each area draws
such a loop, so it is kept. A single closed loop keeps its area as
before.
The Pencil and PencilClose entries in cursors.toml, the PencilClose doc
comment and the closing-cursor line in docs/target-app-parity.md said Alt
held while drawing closes the path. A drag started with Shift or Alt
held draws an open straight line and does not show the closing cursor,
so the texts now say Alt is pressed after the drag starts and name that
exception.
With Alt key toggles to Smooth Tool off, holding Alt when a Pencil drag
starts now draws one straight segment from the press point to the
pointer, at the angle the pointer takes, as Shift does at 45° steps.
Pressed on an end of a selected open path, the line continues the path
from that end. Both ends snap to Smart Guides as a stroke's ends do, and
the line stays open when Alt is still held at the release. Shift and Alt
together keep the 45° steps.
Before, a drag started and released with Alt held drew a closed freehand
path. Alt pressed after the drag has started still closes the path at
the release, and with Alt key toggles to Smooth Tool on, Alt still switches
to the Smooth tool. Before a Pencil press, Alt no longer shows the closing
cursor.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
Create Outlines on a frame of threaded text removed the frame, and the
thread's re-flow then added the frame's text to the story, as it does
for a frame that was deleted. The other frames held that text a second
time while the outlines drew it. Object › Expand, and Expand Appearance
where it outlines type or groups it with a shadow, outer glow or Crop
Marks, did the same.
An outlined frame now leaves its thread with the text it shows, and the
other frames keep the text they hold. When the thread's last frame is
outlined, the text it has no room for goes after the text of the last
frame that stays. When Expand Appearance keeps a frame as type in a
group, the type takes the frame's place in the thread. A thread left
with one frame is no longer a thread, and undo restores the thread.
Docs: docs/mcp.md, docs/target-app-parity.md.
Review of #3924: in a flat area of ` <<(` (CMYK or RGBA 32, 60, 60, 40) in an uncompressed image, each `<<` after white space was read as a dictionary, and each read its string, which never ends, to 64 KiB past it: about 16 K bytes a pixel, so a few hundred bytes of it spent the budget and the file was refused.
Whether a byte in a literal string is escaped doesn't depend on where reading began (the run of `\` before it lies after any `(` before it), so the string from any `(` ends after the first `)` that takes the file-wide count of `(` less `)` below the count at that `(`. Those ends are found for the whole file in three linear passes the first time a string read in skipped text runs past 64 bytes: forward for the final count, back for the `(` whose string never ends, forward pairing the rest. Ends further than 64 bytes are kept (at most one for every 16 bytes of the file; a file built to nest past that is refused); nearer ones are read again. So entering a string costs at most 64 bytes, charged as one. A comment's end of line is kept for every comment read, not only the last.
Review of #3924: every `<<` in a string, comment or stream's data was read as a dictionary of its own, and in a run of `<` (an uncompressed image's flat area of grey 60) every position is one, each read to past the run, so about N²/2 bytes for N `<` and a 1 MiB run refused the file.
The reader starts a dictionary there only where its repair scan tries one (after white space or a dictionary's `>>`) or after an object's `N G obj`: so only those `<<` are read, in a run of `<` only the first. A reading goes on as far as 64 KiB past the last `<<` opened on the way, looks at each nested dictionary's `>>` for a stream and marks each `<<`, so it is not read again; a comment's end of line is kept, as many readings cross the same comment; the `<<<` second-`<` reading in the main pass goes (the reader never starts there). The dictionary text a stream check parses is charged to the budget.
Review of #3919: the scan raised its walk-back floor at every `>>stream`, so one inside a literal string moved the floor past the `<<` of the cross-reference stream around it, and that stream was never looked at. The backward walk also counted a `>>` inside a string, and missed a comment between `>>` and `stream`.
The scan now reads the file forward once, as the reader does: literal strings (nested, escaped), hex strings and comments are skipped, `<<` and `>>` pair on a stack, and a dictionary followed by `stream` is a stream's, whose data is skipped. Because the reader can still start at a `<<` inside skipped text (a cross-reference offset or its repair scan), each such `<<` is read as a dictionary of its own, up to 64 KiB, within a budget of four times the file plus 1 MiB; a crafted file that spends it is refused. The scan stays linear.
hayro-postscript now comes from craft-libs' vendored copy, whose token scanner skips << and >>
runs without recursion, instead of crates.io 0.1.0. The rev also brings the reader input bounds
and crash fixes from craft-libs #257 and #261. The pdf-deps check requires hayro-postscript from
craft-libs; ASSETS.md, NOTICE and docs name the new rev. The asset hashes are unchanged.
* Build: craft-pdf, hayro and krilla at craft-libs main
Picks up the input bounds that landed after ca50d63b: zero-width xref streams, the JBIG2
referred-to segment count, the graphics-state stack depth and decoded PNG sizes.
* Build: craft-libs 9f75d3dc, with hayro-cmap from craft-libs
Adds the /W2 CID-width bound (#254) and takes hayro-cmap from craft-libs' vendored copy,
which skips malformed CMap parts, instead of crates.io 0.1.0.
* Build: the pdf-deps check, ASSETS.md, NOTICE and docs name craft-libs 9f75d3dc
The check also requires hayro-cmap from craft-libs. The asset hashes are unchanged.
An AppKit local event monitor (apps/vectorcraft/src/mac_tablet.rs) reads each mouse and tablet event's pressure and the pen's end before winit's view handles it and writes them into the canvas's StylusFeed. The feed keeps the pressure of each pointer move, and the canvas pairs them with the frame's moves, so a fast stroke keeps its curve and each point its own pressure; mouse event coalescing is off. The eraser end selects the Eraser tool, as on Linux. Ported from PhotoCraft's crates/tablet (pressure and eraser end only).
* CI: line tables only for workspace crates, no debug info for dependencies
* CI: one integration-test binary per crate
Each crate's tests/*.rs files become modules of tests/it/main.rs. Files that change
process-wide state (Color Settings, the font database, installed plug-ins, the working
directory), the fuzz sweeps and the test targets the Affinity corpus workflow names stay
their own binaries.
* Docs: name the integration tests' new paths
* CI: xtask test with nextest and doctests, one wasm check, clippy --keep-going
cargo xtask ci runs the tests with cargo nextest (cargo test when it is not installed),
builds them with --lib --bins --tests, runs the doctests as their own step, and checks
the wasm crates in one cargo check --keep-going call.
Where two passes of a path (an open line's way there and back) cross another
path, the sweep can cut them a rounding error apart and join the two cuts
with a stub a little over its tolerance. Upstream's twin-piece joining
already merges the ends of the two passes, but not such stubs, so dense
hatches at exact binary steps (lines every 0.5 pt across a 45° line) still
came back with a speck of a piece per crossing. The planar map now contracts
such stubs into one vertex before the edges are built (within 4x eps up and
down the sweep's frame and 1/16 of the 0.01 pt precision along it), bounded
by each cluster's extent so a run of tiny, nearly level segments (a finely
flattened or traced path) is not collapsed transitively.
Ported from the fork's d5985b14 and 616a5c4a with their tests:
a_dense_hatch_at_exact_binary_steps_cuts_each_line_once_per_crossing (fails
without the fix), a_run_of_tiny_level_segments_is_not_contracted_as_stubs
(fails without the extent bound) and
a_line_crossed_where_its_two_passes_part_is_cut_once (already passing on
upstream, kept as a regression test).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014gCpjL3yUhaH3jRp7ksufh
Each `stream` keyword walked back up to 64 KiB through every dictionary before it, so 1 MiB of `<</A <</B 1>> >>stream` took minutes. A walk back now stops where the previous keyword's walk began, and a stream without a Length shares the search for the next `endstream`.
The line said the text and its wrapped lines start at the left indent. The first line's text starts at the next tab stop after the bullet, with the left indent counted as a stop; only the wrapped lines start at the left indent.
VectorCraft had no lists. A bullet could only be typed as a character,
and the tab after it did not stop at the left indent. The reference app
turns paragraphs into a bulleted list from the Paragraph panel, the
context menu and Type › Bullets and Numbering › Apply Bullets.
text.setFormat takes list ("none" or "bullet") and bullet ("none",
"dot", "dash", "circle" or "square"). The layout draws the bullet before
the first line of each list paragraph that has text, in the font, size
and color of its first character, and starts the text at the next tab
stop, with the left indent counted as a stop. Wrapped lines start at
the left indent, and type on a path draws the bullet too. In a
horizontal right-to-left list paragraph the indents are mirrored: the
bullet hangs at the right, and the wrapped lines start at the right
where the first line's text starts after the bullet. The bullet is not
a character of the text. A paragraph whose left and first-line indents
are both 0 gets 18 pt and -18 pt when it joins a list. Return continues
the list, paragraph styles carry it, Reset Panel turns it off, and the
native file saves it only when it is set.
The Paragraph panel has a Bullets button with a list of the five
presets, and Type › Bullets and Numbering › Apply Bullets and the
context menu run type.applyBullets. Live SVG text writes the bullet's
character, and SVG writes type on a path with bullets as outlines. DXF
writes the bullet as a TEXT entity of its own, and legacy .ai export
warns that bulleted lists are left out. The caret, selections, Touch
Type and Show Hidden Characters skip the bullet.
Live SVG text of horizontally scaled type now writes each tab in a
tspan of its own. Before, the characters before a tab shared its tspan,
and its textLength made a viewer stretch them across the tab's gap.
Docs: docs/mcp.md, docs/target-app-parity.md.
Review follow-up (CodeRabbit): thumbnails rendered the symbol alone in an empty document, so a
symbol nesting another one, or painting with a pattern or showing an image, lost that art in the
Symbols panel and in symbol library panels. The preview now renders an instance alone on a copy of
the document (or library) the symbol comes from, which keeps its resources but none of its art,
and the thumbnail cache also follows the art of the document's symbols and patterns.
Window › Symbol Libraries and the Symbols panel's Symbol Libraries Menu open each symbol library
in a library panel of its own, on the shared library panel code the swatch and graphic style
libraries use (https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-or-import-symbol-libraries.html,
.../symbols-panel-options.html, .../create-and-place-symbols.html).
- Basic Shapes: one original library generated in code (circle, squares, triangle, diamond,
hexagon, star, burst, arrow); no other app's libraries.
- A click adds a library symbol to the document's Symbols as one undo step, with its Symbol
Options and the resources it uses (nested symbols, patterns, swatches, brushes, graphic styles,
images), and makes it the current symbol; one already there isn't added again, a clash of
names numbers the library's. Shift/Cmd-clicks select for Add to Symbols. Dragging a library
symbol onto the canvas adds it and places an instance there, in the same step.
- Save Symbols… (library menu, Window menu) and Save Symbol Library… (Symbols panel menu) write
the document's symbols as a .vectorcraft document holding only them, into the user library
folder (User Defined, window.userSymbolLibrary1-10) or a file; Other Library… reads the symbols
of any document VectorCraft opens, and a file it can't read is an error.
Commands: symbol.libraries, symbol.library, symbol.addFromLibrary (place, x, y),
symbol.saveLibrary, symbol.loadLibrary; UI: window.symbolLibrary (.other), ui.saveSymbolLibrary
(dialog saveSymbolLibrary). i18n rows in every complete catalog; docs updated.
The hover's context now includes the active tool (PR review follow-up):
switching to the Selection tool with Alt held and the pointer still
showed no Distance Guides until the pointer moved, since the new tool
had never hovered. A tool switch re-hovers at the pointer whatever the
tool; the rest of the context (canvas, view, document and revision)
re-hovers tools that ask (Tool::wants_rehover).
canvas::tests::distance_guides_follow_what_lies_under_a_still_pointer
adds a tool switch (fails without the rule), a modal dialog with its
backdrop over the pointer, and another document opened under it.
One rule for the hover's context (PR review follow-ups): the target is
recomputed where the pointer is, or cleared, whenever what lies under it
can change while Alt is held.
- The tool hovers only where the pointer is on the canvas itself
(`on_canvas`): under a floating panel, a menu, a popup or a dialog
its hover ends (Tool::hover_ended), as when the pointer leaves the
canvas or a pan, zoom or view-rotation press starts.
- The canvas keeps the hover's context: its rect, the view's centre,
zoom and rotation, and the active document's id and revision (which
moves with every edit, undo and selection change). When it changes
under a still pointer, a tool that asks (Tool::wants_rehover; the
Selection tool after an Alt hover) is hovered again at the pointer,
so wheel, gesture, key or command scrolling and zooming, tab
switches, edits and undos re-measure.
- Coming back onto the canvas re-hovers the tool.
canvas::tests::distance_guides_follow_what_lies_under_a_still_pointer:
a floating window over the pointer (fails without the on_canvas filter),
a 150 pt scroll that leaves empty artboard under it (fails without the
re-hover), a square made under it. select::tests::distance_guides_need_
alt_a_selection_and_smart_guides checks wants_rehover.
An Alt+Space pan press went to Drag::Pan and never reached the tool, so the Distance Guides stayed through the pan until the pointer left the canvas (PR review follow-up). One rule now covers all three cases: the tool's hover ends (Tool::hover_ended, renamed from pointer_left; Session::tool_hover_ended) when the pointer leaves the canvas with no press the tool holds, and when a press starts any drag that doesn't reach the tool (pan, middle-button pan, zoom box or scrub, view rotation, touch gesture). canvas::tests::distance_guides_go_when_the_hover_ends asserts they go at an Alt+Space press and stay gone panning out over a panel.
Leaving the canvas (for a panel, or out of the window) sent the tool no
hover event, so the Selection tool kept its Alt-hover target and went
on drawing the measurements (PR review finding).
- Tool::pointer_left: the pointer left the canvas with no button held;
the Selection tool drops its Distance Guides target and its Smart
Guides hover label. Session::tool_pointer_left reaches it.
- The canvas remembers whether the pointer was over it last frame: on
leaving with no drag it calls tool_pointer_left; on coming back it
re-hovers the tool even after a single jump egui doesn't count as
moving, so the guides show again.
Tests: canvas::tests::distance_guides_go_when_the_pointer_leaves_the_
canvas (fails before: the label stayed over a panel with Alt held),
select::tests::distance_guides_need_alt_a_selection_and_smart_guides
(pointer_left clears them).
Distance Guides, from the public "Use Distance Guides for accurate
placement" and "Smart Guides options" (Invoke Distance Guides) pages:
with Smart Guides on, something selected and the Selection tool,
holding Alt/Option over another object shows the horizontal and
vertical distances between the selection and it, and over an empty
part of an artboard the selection's distances from the artboard's left,
right, top and bottom edges.
- guides::distance_guides measures the selection's bounds to a box: on
an axis on which they lie apart, the gap between their facing edges;
otherwise the offsets of both pairs of matching edges. Each line runs
across the middle of the overlap on the other axis (else the
selection's middle), with a dashed line out to the target's edge when
it passes beside it. An artboard is always measured edge to edge.
Labels are in the General unit, in the smart guide colour.
- The Selection tool keeps what its Alt hover points at and draws the
guides while idle; letting Alt go (the canvas re-hovers on a modifier
change), a press or moving off clears them.
- Overlay::Distance: the line with end ticks and its length in a pill;
the canvas draws it.
- Preferences › Smart Guides › Invoke Distance Guides (`distanceGuides`,
on by default), with i18n rows; View › Smart Guides gates it too.
- Hover only, as the pages describe: nothing while moving or nudging.
Tests: select::tests::alt_over_* (gap and edges beside and below,
artboard edges in pt and mm), distance_guides_need_alt_a_selection_and_
smart_guides, tests_prefs::invoke_distance_guides_measures_the_selection_
to_the_object_under_alt, canvas::tests::alt_over_another_object_draws_
the_distance_guide_label (frame test of the drawn label and line).
