Type › Optical Margin Alignment was a disabled menu item. The reference
app's Optical Margin Alignment hangs Roman punctuation and the edges of
letters such as W and A outside the margins of every paragraph of a
type object.
type.opticalMarginAlignment (Type › Optical Margin Alignment) turns it
on or off for the selected type in one undo step, and the menu item is
checked while the type has it on. In every left-to-right paragraph of
point and area type, quotation marks, hyphens, full stops and commas at
a line's start or end hang wholly outside the margin there. Asterisks,
tildes, ellipses, en and em dashes, colons and semicolons hang by half
their width, and A, V, W, Y, v, w and y hang by a tenth of theirs. A
punctuation mark followed by a quotation mark hangs with it.
Left-aligned lines hang at their left margin, right-aligned lines hang
at their right margin, and centered and justified lines hang at both.
Lines break where they did before, and the space that justification
adds between glyphs leaves out the gaps next to a hanging punctuation
mark.
The setting is off for new type and for documents from before it, and
the type object saves it only when it is on.
The Type menu's checks for Optical Margin Alignment, Type Orientation
and the Type on a Path effects now read the type inside a selected
group, as the commands do.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Each style run was shaped on its own, so restyling one character, even
only its fill, dropped the font's kerning pairs at the new run
boundaries. A fill change on the V of 40 pt "AVAV" moved it 0.56 pt and
moved the characters after it 1.12 pt. Manual kerning on a character
also dropped the font's kerning with the character before it.
Adjacent runs that differ only in fill, stroke, underline,
strikethrough, overprint, character style name, leading, baseline
shift, rotation, Character Alignment, kerning, or tracking (as long as
both values leave standard ligatures on or both turn them off) are now
shaped together, and each glyph takes those attributes from its own
run. The font's kerning pairs apply after characters with automatic
kerning: a manual value replaces the pair after its character, and the
pair before it stays, except before a character that All Caps or Small
Caps sets as two letters (ß as SS). A change of font, size, scale or
OpenType features still shapes the characters apart, and a ligature or
a mark still does not join characters in different styles.
Docs: docs/target-app-parity.md.
A syllable drawn with several glyphs that share one cluster, such as a
pre-base i matra and its consonant (कि), had a caret stop at the edge
of each glyph. A click just right of the matra, in the left half of
the syllable, put the caret after the syllable. byte_in_line now takes
one extent for each cluster, and type on a path compares the click
with the middle of the cluster, from the start of its first glyph to
the end of its last.
New tests with an installed OpenType Devanagari font check that क्ष
forms one conjunct glyph, that र्क draws the reph after its base, that
कि draws the matra before its consonant, that Ka with a nukta matches
the precomposed क़, and that each syllable is one cluster with the
arrow keys stopping at its ends. They print SKIPPED when no such font
is installed.
Docs: docs/localization-parity.md (Hindi row), docs/target-app-parity.md.
A tab's width depends on where it falls from the tab origin. Line breaking and the line width measure it from the left edge, but a centred or right aligned line is placed from its own start, so its tabs stopped elsewhere. The line is now laid out with its tabs measured from the left and then aligned as a whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Line breaking, the line's natural width (and so justification) and the composer counted a tab as its glyph's width, a space, while it is set up to its next tab stop. A paragraph starting with a tab, as in the report, filled a justified line as if the tab were one space, and the line ran past the frame. break_line and the line width now measure tabs with tab_advance, and a paragraph with a tab is broken line by line, since the composer works with fixed glyph widths.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
An ideographic space in a face without U+3000 was shaped with that face
and could set at zero width, removing an indent. Only what the layout
handles itself (tab, line and paragraph breaks) stays with the primary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When type had used a font, removing the font while the app ran left
it in the font menus, and the type kept drawing in it until the app
restarted. The font list is the loaded faces plus the scanned catalog,
and a scan replaced the catalog but kept every loaded face.
A scan now drops each loaded face whose file it did not catalog, with
the face's cached outlines. A family with no face left leaves the font
lists, and type set in it lays out in the fallback font and is
reported missing, as when a document opens without the font. When the
font is installed again, the next scan lists it and the type draws in
it again. Bundled fonts and fonts added as bytes have no file and
stay.
Docs: docs/mcp.md, docs/target-app-parity.md.
The nine OFL faces in `assets/fonts` are compiled into every build of
vectorcraft-text: 3.4 MB of the binary, about 1.6 MB of a gzipped wasm.
An embedder that loads every font at run time with `FontDb::add_font`
(a web app serving its own font catalogue, say) ships them twice and
can't turn them off.
- vectorcraft-text: `bundled-fonts`, a default feature, holds the
`include_bytes!` list. Off, a database starts without them (craft-fonts
and system fonts are unaffected) and text has no glyphs until a font
is added, as when the bundled fonts fail to parse.
- vectorcraft-engine: a `bundled-fonts` default feature forwards to it,
so the apps and any embedder using the engine keep the fonts unless
they build it with `default-features = false`.
- The workspace declares vectorcraft-text without default features, so
no library crate turns the fonts back on. The tests of cad, metafile
and tools, which lay type out, ask for the feature in their
dev-dependencies; the other crates' tests get it through testkit.
`cargo test --workspace` builds with the fonts, as before. A new
integration test, `without_bundled_fonts`, covers the configuration
without them (`cargo test -p vectorcraft-text --no-default-features
--test without_bundled_fonts`): the database starts without them, text
in no font lays out with no glyphs, and a font added later is used and
is the fallback for families the database lacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For Auto Size area type in columns, every text edit, each keystroke of
the Type tool included, laid the text out in one column and then laid
the columns out at that height and at each step of a bisection for the
least height that holds the text. In the release-build timing test
auto_height_in_columns_typing_timing (stories of 5,000 to 50,000
characters at 9 pt in a frame 500 pt wide), a keystroke laid the
columns out 18 to 22 times, and typing at the start of the story of
50,000 characters in 2 columns took 1,670 ms a keystroke.
The bisection now runs on the lines of the one-column layout.
columns_hold computes where those lines would sit in the columns, with
each column's first line at its first baseline below the column's top
(LineInfo::first_baseline, new in vectorcraft-text). The columns are
then laid out at the upper height the bisection ends on and, when they
hold the text there, at the lower one, unless that is the 1 pt it starts
from. When they hold the text at the upper height and not at the lower
one, Auto Size takes the upper height. When taller columns always hold
the text, the old search ends between the same two heights. When the
text wraps around other objects or does not fit the one-column layout,
or when that check fails, the columns are laid out at every step as
before. The same keystroke now takes 292 ms.
Docs: docs/target-app-parity.md.
In a dev build, opening a native file whose area type has 2^60 rows
or 2^60 columns failed with an internal error ("capacity overflow"),
and opening one with 2^32 rows and 2^32 columns failed with "attempt
to multiply with overflow". Text layout reserved room for rows times
columns frame cells. `text.areaOptions` keeps both counts within 1 to
100, but reading a document kept the counts the file gave.
Reading a document now clamps each count to 1 to 100
(`AreaOptions::MAX_ROWS_COLUMNS`): a larger count reads as 100, and 0
reads as 1, as layout already treated it. Text layout clamps both
counts the same way. Area type with 1 to 100 rows and columns lays out
as before.
The cells of a frame now share one copy of the frame's flattened
polygons and one copy of the flattened text wrap shapes. Each cell held
its own copy: in a dev build, a test process that laid out text in 100
rows and 100 columns of a circle frame of radius 1,000,000 pt peaked at
1.33 GB of memory, and now peaks at 100 MB.
Type is written as version 7 text objects (§15): point type, area type and type on a path, with
fonts by PostScript name re-encoded to Windows-1252, and each run's paint, size, scaling,
tracking, leading, alignment and indents; type 8-bit text can't hold (or all, with outlineText)
is outlines. The format hides only layers, so hidden objects go to a hidden layer above their
own (hiddenObjects "layer", the default), are left out ("omit") or show ("visible"). The .ai
reader reads legacy type (To … TO, TE, %AI3_BeginEncoding) and ignores Ar; the import fuzzer
gets legacy type tokens.
For a name that is neither a loaded nor an installed family,
FontDb::canonical built the list of names of every loaded face on
every call. Layout asks for a style's face for each span it shapes
and three more times per paragraph, so the time to lay out type set
in a font that is not installed grew with the number of fonts loaded:
a story of 1,000 paragraphs took a median of 409 to 507 ms in a
release build with 400 fonts added.
The database now keeps canonical's answer for each such name and style
until fonts are added or rescanned, and it keeps at most 4,096
answers. The same story takes a median of 56 to 71 ms, and canonical
gives the same answers as before.
Docs: docs/target-app-parity.md.
A character style's OpenType features took nine tags. OtFeatures now
also keeps ss01-ss20, salt, titl, pnum, lnum, sups and subs (off by
default, one bit each in `extra`): they are accepted by the type
commands, stored with the style and passed to the shaper, so a font
that has them uses them.
The Affinity import test used ss01 as its example of a feature kept but
not rendered; it now uses cv01 for that (character variants still
aren't rendered) and keeps ss01 as one that is.
Fixes#1607
The font scan read /usr/share/fonts, /usr/local/share/fonts, ~/.fonts and the
XDG data folders. Packages add folders outside those to fontconfig's
configuration (TeX Gyre under /usr/share/texmf/fonts), so fc-list and other
apps showed fonts VectorCraft didn't have. The scan now also reads the <dir>
folders of /etc/fonts/fonts.conf and the files it includes (conf.d, the user's
own), as the fontconfig documentation describes them. The files are read as
they are: no library is linked and no program is run.
Opening an EPS whose threaded area type frame has a control point at
x = 8e115 failed with an internal error ("capacity overflow").
`eps_text_frames_never_panic` in `import_fuzz` found it with
PROPTEST_CASES=20000. Text layout flattens a frame to within 0.1 pt,
and for such a curve kurbo 0.13.1's `flatten` calls `reserve` for
`usize::MAX` quadratic pieces. Laying out text around a wrap shape with
such a curve failed the same way. Laying out type on a path along such
a curve panicked in kurbo's `solve_itp` ("attempt to shift left with
overflow") in builds with overflow checks, and in a release build it
did not finish within 20 s. Laying out area type in a triangle frame
that comes to a point at its top, at y = 1e20, did not finish either:
adding a lead to a baseline that large leaves the baseline where it is.
Text layout now leaves out a frame, a text wrap shape or the path of
type on a path that has a coordinate beyond 1,000,000,000 pt either
way, control points included, or a NaN coordinate in an anchor point.
Such a frame or path holds no text, and such a wrap shape is ignored.
PDF export uses the same bound (`MAX_COORD` in
`crates/pdf/src/export.rs`).
Text layout also steps a line down a frame cell at most 100,000 times
to find room for it. In a cell taller than 100,000 leads, a step is the
cell's height divided by 100,000; in a shorter cell, a step is one
lead, as before. Before this change, in a dev build, with triangle
frames that come to a point at their top, laying out text in one
2,000,000,000 pt tall took 9.8 s, and laying out a paragraph whose
Space Before is -1e300 pt in one 1,000 pt tall did not finish within
20 s.
A character missing from every installed font was remembered as missing for the whole
session, so installing a font that has it didn't help until a restart. A rescan of the
font folders now forgets those misses, and a search a rescan overtook doesn't record one.
Taken from #992 by sanyamsingh001, without its font file probe.
Co-authored-by: sanyamsingh001 <314051937+sanyamsingh001@users.noreply.github.com>
The follow-up #966 left room for. With automatic kerning, horizontal type
with Proportional Metrics also applies `apkn`, and vertical type applies
`vkrn` and `vapk` along with `vpal`. Manual kerning turns them off, as it
turns off `kern`.
Vertical kerning used to cancel out: both top-to-bottom shapings had
harfrust's default `vkrn`. The baseline now has neither `vpal` nor the
kerning, so their difference carries both. A third shaping (`vpal` alone)
tells which advances `vpal` itself changed, and mojikumi steps aside only
for those. Vertical type without Proportional Metrics isn't kerned, as
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds the Character panel menu's Digits option (with the Middle Eastern /
Indic options, beside Paragraph Direction in the Paragraph panel) as a
character attribute: CharStyle::digits, saved only when set, with
text.setFormat {digits} and text.setRangeStyle {id, start, end, digits}
("default" | "arabic" | "hindi" | "farsi"; a bad value is an error).
Shaping draws every digit of the Western, Arabic-Indic (U+0660–U+0669)
and Eastern Arabic-Indic (U+06F0–U+06F9) sets in the chosen system,
whatever was typed, before font fallback, so a font without the
Arabic-Indic digits gets a fallback for them. The text, its clusters,
the caret, selection and search stay as typed, as with All Caps; SVG
export writes the digits as drawn.
Catalog rows for Digits, Arabic, Hindi and Farsi in the ten translated
languages. Docs: docs/mcp.md (Digits), type-parity.md (digit types
done; Character Direction, kashidas, composers and the split caret
still missing), target-app-parity.md and gaps.md.
Behaviour from the public documentation (a character-level option with
the values Arabic, Hindi and Farsi in the Character panel menu):
https://helpx.adobe.com/indesign/desktop/language-and-proofing/arabic-and-hebrew/choose-digit-types.html
Tests: doc (the mapping and serialization), text (glyphs of "page 3" in
Hindi/Farsi equal the typed Arabic-Indic digits' on the typed clusters;
skips without a font covering the three sets), engine (setFormat,
setRangeStyle, undo, error), svg (digits written as drawn), ui-egui
(the menu shows with the Indic options).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Releases pinned craft-fonts at its first commit, with the Japanese fonts
only. The pin moves to its current main, as PdfCraft, LightCraft and
WordCraft have moved theirs: desktop builds embed Noto Sans Thai, Noto
Sans Arabic and Noto Sans CJK SC too (the web build still embeds only
the UI font and fetches Thai and Arabic beside the wasm). Packages
already copy every embedded font's licence.
The Thai loanword test no longer assumes the bundled fonts' widths: it
checks that no line ends inside โปรแกรม, whichever Thai font sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl/Alt+arrows and double-click treated a run of Thai (Lao, Khmer,
Myanmar) without spaces as one word, and stopped at a word's tone and
vowel marks, which didn't count as part of a word. They now stop at the
word boundaries the line segmenter finds in those scripts (shared with
line breaking, so no more data ships), and combining marks count as
part of a word, also for combining accents in other scripts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The web build has no installed fonts, so Thai there showed as empty
boxes. With a craft-fonts checkout that has Noto Sans Thai, its Thai
font joins the document font database after the Arabic ones (the
fallback for Thai where no Thai font is installed) and the web build
fetches it before the app starts, as it does Noto Sans Arabic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The font menu's script filter offered Japanese and Latin only, so Thai
fonts had to be found by name among every installed family. It now has
Thai too: the families whose character map has Thai. Latin lists the
families with neither Japanese nor Thai.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
These scripts don't separate words with spaces, and lines only broke at
spaces, hyphens and CJK characters, so a Thai paragraph in area type ran
on to the next space (or was cut wherever it overflowed). Each
paragraph's glyphs now carry the word ends ICU4X's line segmenter finds
in text of those scripts (its dictionaries on the desktop, its far
smaller LSTM models on the web), and a line may break after them as
after a space. Other text keeps its own breaks, and clusters (a
consonant with its vowel and tone marks) still never split.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Type tool's Left and Right arrows and Delete moved one code point at
a time, so the caret could stop between a Thai consonant and its vowel
or tone marks (or inside an accented letter or emoji sequence), where
typing or deleting splits the cluster. They now step over extended
grapheme clusters. Backspace still takes back one character at a time,
as Thai typists expect for a mistyped tone mark.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Thai typed in a font without Thai glyphs (Source Sans 3, a Latin font)
took the first loaded face that had them, or the first installed file
that did, in path order: on one Windows machine a display face (Kanit)
rather than Leelawadee UI. Characters of Thai, Lao, Khmer and Myanmar
now try fonts made for their script first, installed ones loaded on
demand (Leelawadee UI, Tahoma, Thonburi, Sukhumvit Set, Noto Sans Thai,
the TLWG fonts for Thai), then the fallback as before. Latin beside
them keeps the font chosen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The second half of #966. With Proportional Metrics on, a vertical segment is
also shaped top to bottom, with and without `vpal`: the difference gives
each glyph's change of advance down the column and its x and y placement.
An upright glyph (not tate-chu-yoko) in a font with vertical metrics takes
them on top of its cell, so it moves with its shorter cell; a font without
vertical metrics keeps `upright_cell`'s cell, and with the switch off
nothing is shaped twice and the column is as before.
As in horizontal type, Line-end Punctuation Half Width takes nothing more
off the punctuation `vpal` re-spaced and trims the punctuation it leaves
full height as before. Docs: mcp.md, and Proportional Metrics leaves the
missing lists in gaps.md, type-parity.md and target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
crates/text/build.rs (craft_fonts.rs) and crates/ui-egui/build.rs (credits.rs) wrote their
output on every run. Where cargo's recorded times lose their sub-second part (an ecryptfs home
directory, as Mint and Ubuntu offer at install), a file written just before its crate compiles
reads as newer than that compile, so the next build compiled the crate and everything above it
a second time: a full app rebuild for nothing after any build-script rerun. Unchanged output is
now left alone.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A character attribute (Character panel menu with the East Asian options;
`text.setFormat` / `text.setRangeStyle {proportionalMetrics}`), saved only
when on. In horizontal type it applies `palt`; vertical type sets as before
until the vertical shaping change (`vpal`) follows.
Line-end Punctuation Half Width takes nothing more off the punctuation
`palt` re-spaced (the flush opening bracket, consecutive punctuation, the
line-end half width): the segment is shaped once more without `palt`, and
the glyphs whose advance differs are marked. Punctuation the font leaves
full width is trimmed as before. SVG writes `"palt" 1` with the
character's other features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After scaling 12 pt type 2x, the Character panel still showed 12 pt and
typing 10 pt gave 20 pt type. Character controls and text commands now
work in document points: the size, leading and baseline shift shown and
set are the stored ones times the text's scale along its em height, and
horizontal scale includes the ratio of the transformed em axes. Rotation,
reflection and shear stay in the transform, so text remains editable.
Groups' text counts, keyboard increments use the same units, Shrink
Text to Fit works in document tenths, and a collapsed transform rejects
dimensional edits without touching the document.
text.getRange takes effective: true for the document-space values.
A folder search reads at most 8 MB of each font file. The suitcase
reader reads a suitcase font's resource fork whole, up to 256 MB.
Before this change, the search applied its limit to each font only
after that read. One search thread could read 256 MB from a single
suitcase and hold a copy of its fonts as well. The search now reads a
suitcase font only when its resource fork is 8 MB or less. The font
scan still reads each suitcase font's resource fork whole, up to
256 MB.
Docs: docs/mcp.md.
When a document opens with fonts that aren't available, fonts used
only in its symbols included, VectorCraft lists them in a Missing
Fonts dialog after the missing linked file questions, one document at
a time, with Find Fonts and Close. Find Fonts opens Type › Find Font
on the first missing font of the layers' type, to replace it. After
Find Fonts or Close the dialog doesn't open again for that open; when
another dialog replaces it, it opens again once that dialog closes.
Search Fonts Folder (the Fonts folder File › Package writes next to
the document) and Find in Folder… search a folder and its subfolders
for the fonts' files, and Add Fonts copies the files the user chooses
into a Fonts folder next to the preferences. The desktop app and
vectorcraft-cli read that folder with the system's font folders. Type
› Find Font has a Find in Folder… button too when fonts the document
uses are missing. The web app shows no dialog; a status message says
how many fonts aren't available.
- text.missingFonts lists each missing family and style once,
whatever version the document's type names, and leaves out CSS
generic families such as sans-serif. text.findFontFiles searches a
folder on up to 8 threads and returns at once; text.findFontFiles {}
reports the search, and {stop: true} stops it. A search reads only
what the font scan reads of font files (their table directories and
name, fvar and OS/2 tables) and, on macOS, of suitcase fonts, and
lists a file for a font only when the file makes the font resolve
exactly. It does not enter app packages, the Program Files and
ProgramData folders, the system's folders at the root of a volume,
the Shared and Public folders in Users, a home folder's Library,
AppData, Applications, snap and dot folders, a Library folder's app
data folders or the folders the environment names for apps, and it
skips other hidden folders and does not follow links below the
picked folder. It ends after 60 s by default, after 10,000,000
entries listed, with more than 1,000,000 folders waiting, after
10,000 font files read or 1,000 kept, or once every font has a file;
Stop and Close end it too.
- text.addFontFiles copies only files the last search found. Of
those, it copies only regular .ttf, .otf, .ttc, .otc, .woff and
.woff2 files and suitcase fonts with their resource fork, at most
256 MB a file and 1 GB in all. It never replaces a file: a file with
the same contents is kept, and when another file has that name, the
copy gets a number (Name 2.otf). The fonts are then scanned again,
and type set in them redraws.
- ui.missingFontsDialog and ui.findFontsInFolder open the dialog for
agents; docs/control-protocol.md lists its fields.
- File › Package gives a font file whose name has no font extension
the extension that matches its data (.ttf, .otf or .ttc).
- vectorcraft-text adds set_app_font_dir, which system_font_dirs
reads, WantedFonts, which reads a font file's names as the font scan
does, is_font_file and is_suitcase. #762 split its face reader, which
now takes read budgets: file_face_names_within tries the suitcase
reader first, and reader_face_names_within applies the budgets to
each font. vectorcraft-format adds write_new_with.
Docs: docs/mcp.md, docs/control-protocol.md, ROADMAP.
The styles were stored on the text and written to SVG's text-decoration,
but the type was drawn without the lines. vectorcraft_text::decorations
now gives each underlined or struck-through stretch of a run on a line
its bar, placed and sized from the font's own underline and strikeout
metrics (with fallbacks for fonts that have none). The canvas, Create
Outlines, PDF export (outlined and real text) and SVG's outlined text
draw them in the run's paint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
hyphenation_exceptions_override_the_pattern failed when the round-trip
test set the process-wide list at the same moment: words missing from the
thread's override fell through to the shared store.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font library can hold two versions of one family and style (a new
Montserrat-Bold.ttf beside an old montserrat.ttf). The font database kept
only the first one loaded, so type set in the other couldn't be matched
when a PDF or .ai was opened: it came in as outlines. Now every version
loads (the first stays the one family and style resolve to), PDF import
tries the other versions when the glyphs differ, and type set in a version
the family and style alone wouldn't pick names it in CharStyle::font_version
(left out when None, so documents without it are unchanged). Layout,
shaping, the substituted-glyph highlight, Find Font, Package and Document
Info follow it; changing the font clears it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dotCooCoo