A click with the Selection tool does not select a hidden or locked
object, an object in a hidden or locked group or layer, or a guide path
while Lock Guides is on, but object.isolate isolated each of them. Once
a locked or hidden group, or a group on a locked or hidden layer, was
isolated, a Selection tool drag moved the member under the pointer. The
Layers panel's Enter Isolation Mode sent the same command for a locked
or hidden layer or group.
object.isolate now refuses a hidden or locked object, or one in a
hidden or locked group or layer, with "the object is hidden or locked"
(the text of layer.target), and a guide path while Lock Guides is on
with "guides are locked". Isolation mode stays off, and the selection
stays as it is.
Docs: docs/mcp.md.
The reference app adds a layer while opening the New Layer dialog with
Ctrl+Alt+L on Windows and Option+Command+L on macOS. VectorCraft opened
that dialog from an Alt-click on the Layers panel's New Layer button,
from Help › Search Commands… and from the panel menu's New Layer…
item. It had no key for it, and a Cmd+Alt+L press ran New Layer as
Cmd+L does.
ui.newLayer (New Layer Options…) now has the default Cmd+Alt+L, which
is Ctrl+Alt+L on Windows and Linux. The key opens Layer Options for a
new layer, as the Alt-click does: OK adds the layer above the current
layer, and Cancel adds none. Cmd+L still adds a layer without the
dialog. Keyboard Shortcuts now lists the command with its key.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
A Blob Brush stroke followed the pointer whatever modifier keys were
held. The reference app's shortcut list has Shift constrain the Blob
Brush path horizontally or vertically.
With Shift held during a drag, each point of a Blob Brush stroke now
goes on the horizontal or vertical line through the press point that
is nearer in angle to the pointer, at 90-degree steps from the
Constrain Angle preference, and keeps its distance from the press
point. When the pointer crosses to the other line, the points dragged
since Shift went down move to it, each on its own side of the press
point. Each point reads the Shift state of its own event, so the
points dragged while Shift is up follow the pointer. The stroke still
runs path.blob once on release.
Docs: docs/target-app-parity.md.
Optical Margin Alignment and Roman Hanging Punctuation hung punctuation
in point and area type only. Type on a path kept its first and last
glyphs inside its brackets with either option on.
When Optical Margin Alignment is on, or the first paragraph has Roman
Hanging Punctuation on, the glyphs at the ends of left-to-right type on
a path now hang outside its brackets by the same amounts, measured
along the path. The type hangs at the start bracket when its line is
placed there, hangs at the end bracket when the line is placed there,
and hangs at both when it is centered. Glyphs that hang past the end
bracket do not make the type overflow. On an open path a hang stops at
the path's end, and on a closed path the two hangs together take at
most the stretch between the end and start brackets. SVG export writes
type on a path that hangs as outlines, with a warning.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
The reference app justifies Arabic text with kashidas, set per paragraph
with the Paragraph panel's Insert Kashidas list (None, Short, Medium,
Long, Stylistic). VectorCraft had no kashidas, so a justified Arabic
line was spaced out at its word spaces like a Latin one.
The Paragraph panel, with the Indic options shown, now has Insert
Kashidas. On a justified horizontal area type line that is shorter
than its measure, each Arabic word with joined letters gets one kashida
between its last pair of them, drawn as tatweels (U+0640) in the font
of the letter after it. The kashidas share the line's room equally,
each at most a quarter of an em (Short), half an em (Medium) or an em
(Long); a Stylistic kashida is a row of the font's own tatweels, up to
an em. The word spaces take the room the kashidas leave, so the line
keeps its width, and line breaks do not change. The letter after a
kashida advances over it, so the caret before that letter, a selection
of it and a click on it take the kashida in. None, the default, leaves
lines as they were.
In horizontal type that is not on a path, the caret in a letter drawn
with several glyphs (a letter with a vowel mark) is now placed by the
whole letter, as hit testing already measured it, instead of by its
first glyph.
text.setFormat takes kashida. The setting is saved with the paragraph
only when it is not None, paragraph styles carry it, and Reset Panel
sets it back to None.
Docs: docs/mcp.md, docs/target-app-parity.md.
A paragraph with one character in a different type size was broken
with the Single-line Composer, even when Every-line was chosen: the
composer gave up whenever the paragraph's glyphs did not all have the
same line metrics (ascent, descent, leading, cap height, x height and
em box top).
In rectangular area type without text wrap, rows and columns included,
the width of a line does not depend on how far down the frame it is.
There the Every-line Composer now composes a paragraph whose
characters differ in line metrics (type size, font, leading or
vertical scale, or an inline graphic taller than the text), and each
line takes its height from its own text, as with the Single-line
Composer. Area type of another shape, or with text wrap, still breaks
such a paragraph with the Single-line Composer.
Docs: docs/mcp.md, docs/target-app-parity.md.
An EPS or PostScript file that stops on a PostScript error named the
error, such as typecheck or rangecheck, with the operator and the
procedure, but did not say what the name means in any language.
The warning or error now gives the name as PostScript spells it,
followed by VectorCraft's own wording of what it means in the reader:
"a PostScript error (typecheck in `add`; a value has the wrong type for
the operator)". vectorcraft_eps::POSTSCRIPT_ERRORS lists the 14 names
the reader raises other than undefined, with their meanings, and a
test checks that each of those names has one. Each meaning and the
new message shapes have a row in every catalog. i18n::message now
translates placeholder values five levels deep instead of three, which
the status bar's line for an EPS file that can't be opened needs.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's graphs help describes adding totals to a column
design: type in the design holds a percent sign followed by two digits.
VectorCraft drew that type as typed, stretched with the design.
Type in a column design that holds a % followed by two digits now shows
the value of each column or stacked segment in place of the % and the
two digits. The first digit is the least number of places before the
decimal point, with zeros added in front (0 for as many as the value
needs), and the second is the number of places after it. Values are
rounded half away from zero. The type keeps its own size and moves to
where the design's copy puts the point it is set from. A repeating
design shows it once per column, where a whole copy ending at the value
end puts it, and Chop Design does not cut it. A sliding design moves it
with the part of the design on its side of the guide. Type inside a
group that clips or has its own opacity, blend mode, appearance or
opacity mask, or inside a blend, compound shape, envelope, repeat or
intertwine, stays in the design and shows the value in each copy. Type
inside a symbol stays as typed. The legend swatch leaves the totals
out.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Tabs panel named its alignment buttons Left-, Center-, Right- and
Decimal-Justified Tab and labeled the position field X for every text.
The reference app's alignments for vertical text include Top-Justified
Tab and Bottom-Justified Tab, and its position field is Y for vertical
text.
In vertical type the Left-Justified button is now named Top-Justified
Tab and the Right-Justified button is named Bottom-Justified Tab, in
their tool tips and for screen readers, and the position field is
labeled Y. The reference page does not say which buttons these are;
VectorCraft's own mapping follows the line direction: a line of
vertical type runs from top to bottom, so a Left stop aligns the text
to the top and a Right stop aligns it to the bottom. Screen readers now
call every alignment button by its name; before, they read its glyph.
In horizontal type the tool tips and the X label do not change.
Docs: docs/target-app-parity.md.
object.objectsOnPath.attach took a path inside a compound path, blend,
envelope, repeat or Intertwine group, or a clipping path, as the path
and put it into the new Objects on Path group, so it was no longer a
part of its container. As objects, a blend's key path, a repeat's
source art, an envelope's content and a clipping path were put into
the new group the same way.
The Objects on Path tool highlighted a blend's key path or a clipping
path and attached the selection to it.
objects_on_path::held now finds the container that holds an object.
The command refuses such a path or object with a reason, and the tool
does not highlight it or attach to it. A member of a compound path
given as an object still attaches as its whole compound path. The four
new messages have rows in every complete-message catalog.
Docs: docs/mcp.md (Objects on Path).
Since #2664, swatch.new separates an RGB color into CMYK through the
color settings in a CMYK document unless keepModel is given. The Color
Guide, Color Themes and Recolor Artwork send keepModel when they save
colors they show, but the Color panel menu's Create New Swatch, the
Swatches panel and the Gradient panel did not. An RGB object's color
saved from them became a CMYK swatch, and a gradient's RGB stops
became CMYK stops.
These now send keepModel: Create New Swatch, an Alt-click on New
Swatch, the New Swatch dialog for a gradient, a Fill or Stroke proxy
or the Gradient panel's thumbnail dropped on the Swatches panel or
Alt-dropped on a swatch of its kind, and the Gradient panel's Add to
Swatches and Save to Swatches. A new swatch_paint_params returns
paint_params with keepModel: true added for an unlinked color or a
gradient. swatch.new without keepModel still converts RGB input.
Docs: docs/target-app-parity.md.
Object › Live Paint › Merge built the merged group anew and copied
only the bottom Live Paint group's name, opacity and blend mode, so
its lock, visibility, appearance, opacity mask, graphic style link and
other properties were lost. Make with a Live Paint group selected, and
a Live Paint Bucket click on a selected path beside a selected Live
Paint group, made a new group with a new id instead, and every face
took the fill of its paths again.
Merge now starts from the bottom Live Paint group, as Gap Options
does, and replaces only its faces, edges and paths and its Gap
Options. Make, and livePaint.fill with ids when the point is outside
that group's faces, add the other objects to the bottom Live Paint
group among them as Merge does.
Docs: docs/mcp.md, docs/target-app-parity.md.
Distribute Objects and Distribute Spacing space the selected ruler
guides across the axis (vertical ones for the horizontal options,
horizontal ones for the vertical options) together with the selected
objects, as items with no size. Guides along the axis stay where they
are. Two or more guides selected without objects are enough, and the
Align panel's Distribute buttons are enabled for them. With Align to
Artboard, the outermost items go to the artboard's edges.
A key guide (select.key {guide}) is one of those items. With a spacing,
it stays put and the other items are spaced from it, as from a key
object with no size; a key guide along the axis leaves everything where
it is. The Align panel sends the Distribute Spacing value with both
rows of Distribute buttons while a guide is the key, and enables the
value for it.
The selection tools' clipping-path outline hit was also used where the
Selection and Direct Selection tools act on what is drawn rather than
select. Near a layer's clipping mask edge, with art drawn over it:
loaded text threaded into the unpainted mask instead of the art, a
double-click on type entered isolation on the mask instead of editing
the type (Selection) or did nothing (Direct Selection), and Cmd/Ctrl+
Shift double-click could not release a guide path there. These now
take the ordinary hit (ToolContext::hit_options); a press or hover
that selects keeps the outline hit.
Tests (each fails with the selection hit options):
select::tests::loaded_text_threads_into_the_art_on_a_layer_masks_edge,
a_double_click_on_type_at_a_layer_masks_edge_edits_it (Selection and
Direct Selection) and a_guide_on_a_layer_masks_edge_is_released, over
the new testutil helpers add_masked_layer and
doc_with_type_on_a_layer_masks_edge. Recorded in
docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A clip group answered a press only strictly inside its clipping path,
and there the art above the path came first in the hit test, so where
the clipped art extends past the mask's edge the clipping path's
segments could not be reached on the canvas.
With the new HitOptions::clip_outlines, which the Selection, Direct
Selection and Group Selection tools set
(ToolContext::selection_hit_options), a press within the selection
tolerance of a clipping path's outline, inside or just outside it,
hits the clipping path (HitKind::Outline) before the art it clips:
Direct Selection takes its segments and the Selection tool the clip
group. It applies to a clip group's clipping path and to a layer's
clipping mask, and only to one a click may hit (may_hit: visible,
editable, within reach). Inside the mask the art is hit as before.
The other tools, which act on what is drawn (the eyedropper, type,
gradients...), leave the option off, and hit_test_visible never
applies it, so they still take the art at the mask's edge rather
than the mask's empty appearance. Select Behind's one-pass walk takes
a layer mask's outline first too, so it lists what the repeated hit
test finds. Object Highlighting and a right-click's selection in the
canvas (selection_hit_at) take what those tools take; dropping a
swatch on art still hits what is drawn.
The reference app reshapes a clipping path with Direct Selection:
https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/edit-clipping-masks.html
Tests in doc: a_clipping_path_is_hit_on_its_outline_before_its_art,
only_the_selection_tools_hit_a_clipping_path_on_its_outline and
select_behind_takes_a_layer_masks_outline_first; the random Select
Behind test now clips layers and sublayers and sets clip_outlines,
and fails without the Select Behind change. In tools,
a_press_on_a_clipping_path_takes_its_segment_over_the_art fails
without the change; select::a_press_on_a_masks_edge_selects_its_clip_group
fails when the Selection tool uses the plain options; the eyedropper
copies the art on the edge. Recorded in docs/ui-parity.md,
docs/gaps.md and docs/target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A tab stop moved past another stop in the Tabs panel, by a drag on the
ruler or by a value typed in X, lost the selection. The panel sorts the
stops by position after the move but kept the selected index, so the
ruler highlighted another stop and the X, Leader and Align On fields
showed and changed that stop. With stops at 30 and 50 pt and the 50 pt
stop dragged to 10 pt, the panel selected the stop at 30 pt.
After a drag or an X value re-sorts the stops, the panel now selects
the moved stop at its new place, found by its position as a click that
adds a stop does. When text.tabs.set refuses the new position (an X
past 100,000 pt), the stops and the selection stay as they were.
Docs: docs/target-app-parity.md.
Pattern Brush Options' Scale and Art Brush Options' Width were number
fields only. The reference app's Brushes page documents a Scale slider
for pattern brushes and a Width slider for art brushes.
Each row now has a slider beside its field, as the Bristle Brush
Options sliders do. The slider covers the value's whole range, 1% to
10000% for Scale and 1% to 1000% for Width, in whole percents. Screen
readers name the slider as its row and read the field's number and
text.
Docs: docs/target-app-parity.md.
docs/control-protocol.md and the tool.options params text say that 0
turns the Pencil and Paintbrush options Edit selected paths within and
Close paths when ends are within off. A stroke that
started exactly on an end of a selected open path still continued that
path at 0, and a stroke that ended exactly where it started was still
closed at 0, because both checks compared the distance with <= 0.
At 0, a stroke that starts on an end of a selected open path now draws
a new path, as one that starts on the path away from its ends already
did, and a stroke that ends where it started stays open.
Docs: docs/target-app-parity.md.
brush.new and brush.options refused a Hue Shift colorization given
without a key color ("invalid brush: missing field `key`"), and only
Brush Options picked a default. The reference app's Brushes page says
that by default the key color is the most prominent color in the art.
A Hue Shift colorization without a key now takes the solid color that
the art's fills and strokes use most, the first one found on a tie, or
black when the art has no solid color, as Brush Options already does.
Brush definitions read from a document get the same default.
brush.options replaced each field its params named, so an edit that
gave only the colorization method or only an art brush's start guide
was refused because the key or the end guide was missing. It now
merges colorization and an art brush's scale field by field.
Docs: docs/mcp.md, docs/target-app-parity.md.
Document Info had no Brushes category, and document.info refused
category "brushes". The reference app's Document Info panel menu lists
Brushes after Graphic Styles.
Document Info now has a Brushes category after Graphic Styles. For the
whole document it lists the Brushes panel's brushes. With Selection
Only it lists the brushes that the selected objects' strokes use, each
once. document.info gives the names as brushNames, the panel's flyout
offers the category, and the text report that Document Info › Save…
and File › Package write has a BRUSHES section.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's View menu has Show Live Paint Gaps, which
highlights the gaps in the selected Live Paint group based on the gap
options set for that group. VectorCraft had no such item.
View > Show Live Paint Gaps (view.livePaintGaps) turns the highlight
on or off, and the item reads Hide Live Paint Gaps while it is on.
While it is on and edges show, the canvas draws the gaps of each
selected Live Paint group up to its Paint Stops At size, the gaps that
livePaint.info lists. It draws them as the Gap Options preview does,
as lines in the group's Gap Preview Color. The setting works as View >
Hide Text Threads does: one setting covers every document, it is saved
with the interface state, and Hide Edges hides the gaps. It is off by
default.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's Brushes panel menu has Select All Unused, which
selects the brushes that are not used in the document. VectorCraft's
Brushes panel menu had no such item, and no command listed the unused
brushes.
brush.unused (Select All Unused) is a query that lists, in library
order, the brushes no stroke paints with. Strokes in the art and its
opacity masks, in symbols, graph designs, pattern tiles and graphic
styles count, and so do strokes in the art of a brush that is used.
The art of a brush that is not used does not count, so a brush whose
own art is the only art that paints with it is listed, and so is a
brush used only in the art of an unused brush. The Brushes panel
menu's Select All Unused selects these brushes, and Delete Brush and
Duplicate Brush then act on them.
Docs: docs/mcp.md, docs/target-app-parity.md.
Select > Object > Bristle Brush Strokes selected the objects whose
brush name contains "bristle". It missed objects with a bristle brush
of any other name, and it selected objects whose brush is of another
type with "Bristle" in its name.
select.object.bristleBrushStrokes now looks up the brush of each
object's topmost stroke in the document's brush library and selects the
object when the brush is a bristle brush, whatever its name.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Artboards panel menu showed Convert to Artboards disabled whatever
was selected, and choosing it did nothing, although Object › Artboards
› Convert to Artboards runs artboard.convertToArtboards on the
selection.
The panel menu's item now uses the same check as Object › Artboards ›
Convert to Artboards, so it is enabled when something is selected, and
it runs the same command. Each selected object that has an area becomes
a new artboard of its geometric bounds and is removed, in one undo step.
Docs: docs/target-app-parity.md.
The reference app makes a document without opening the New Document
dialog with Ctrl+Alt+N on Windows and Option+Command+N on macOS.
VectorCraft had no default key for it.
file.newWithoutDialog (New Without Dialog, default Cmd+Alt+N) makes a
document with the settings New Document opens on: the first Recent
entry, or the Print category's Letter while Recent is empty, named
after the next untitled document. It fills the fields with the
dialog's own open, runs file.new with the params Create sends, and
does not show the dialog. A dialog that is already open stays open.
Keyboard Shortcuts lists it under File.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
The reference app adds a new fill with Ctrl+/ on Windows and Command+/
on macOS, and it adds a new stroke with Ctrl+Alt+/ on Windows and
Option+Command+/ on macOS. VectorCraft had Add New Fill and Add New
Stroke on the Appearance panel, with no default key for either.
appearance.addFill now has the default Cmd+/ and appearance.addStroke
has Cmd+Alt+/, which are Ctrl+/ and Ctrl+Alt+/ on Windows and Linux.
Like the panel's buttons and menu items, each key runs its command with
no params and adds the item to every selected object. Keyboard Shortcuts
lists both under Window › Appearance with their keys, and press_key
runs them for agents.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
craft-docpath follows a stored path only on this computer or on the
share the document is on, but its check is lexical and cannot see
mapped drives. fileio::document_path therefore followed a link stored
as Y:\img\logo.png, where Y: is mapped to \\server\other, from any
document: opening the document, links.check, Link Info and the
linked-file watch read or stamped the file on that server.
On Windows, document_path now reads the final path of the root folder
of a link's drive (std::fs::canonicalize). Windows opens that root
folder on the drive's server to answer, so the check still contacts
the server once per lookup; no file on it is read, stamped or watched.
When the final path names a share, the link is checked against the
document's path on its share, and a link on another share is refused
as on another computer, as a link stored with that share's own path
is. Links on this computer's drives and on the document's share are
followed as before, and a link on the document's own drive is not
looked up. A document opened as \\?\Z:\... is looked up on its share
as Z:\... is. Other systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
Preview in Browser wrote each preview into `VectorCraft Save for Web`,
and before each preview it removed every file and folder there that
was an hour old or older. Where the temporary folder is the shared
/tmp, another user could make that folder first, writable by everyone,
and the app wrote its previews inside it, in folders that user could
read and replace. Where the system follows other users' links in /tmp,
the folder could also be a link, and the app removed the old entries
of the folder it named.
A preview now uses that folder only when it is a folder and not a
link, and on Linux, macOS and FreeBSD only when the current user owns
it and no other user can write to it. On those systems the folder and
each preview's folder are made with mode 0700. The cleanup removes
only preview folders, on those systems only those the current user
owns. When the shared folder can't be used, the preview goes to a new
folder in the temporary folder. A later preview removes such folders
once they are an hour old.
Docs: docs/target-app-parity.md.
A live-effect plug-in was given only its object's geometry. An effect
that draws as wide as the stroke it sits on, or tells its fills apart,
had to ask for them again as parameters, which then went stale when
the paint changed.
A live effect's input object now holds the object's fills and strokes
too, read only and in the form a filter gets them (one encoder,
objects::paint_lists, for both), and _context.item says where the
effect sits: "object", or {"fill": i} / {"stroke": i} for an effect in
a fill's or a stroke's own effects. effects::GeomContext carries the
object's appearance and the item, and the plug-in cache keys on the
paints, so a change of paint runs the plug-in again. Hosts from before
this give geometry only; nothing in the output changes.
Expand worked a fill's geometry effects out in the object's context, so
a plug-in effect there would be told "object" and a gradient fill was
expanded into a shape the canvas doesn't draw: fill_shape now gives them
the fill's context, as drawing does (expand.rs).
Siblings named with a declared prefix, the other half of such context,
are left out: the effected geometry is worked out from the object alone
wherever it is drawn, measured, hit-tested or expanded.
wat::when_given is a plug-in whose output depends on whether its input
or parameters hold a text. tests_plugins.rs uses it to check that an
effect sees the stroke's width and the fill, runs again for a thinner
stroke, and on a second stroke is told so; effect.rs checks the item
counting; a gradient fill under such an effect is drawn and expanded
into the same triangle. CRAFT_PLUGIN_PAINTS_WASM=<folder> saves a test
effect to try in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
A plug-in's dialog labelled each field with its parameter's name spaced
out ("Line_spacing_mm:"), showed numbers without their unit and listed
at most 64 parameters in one column. A plug-in with many settings, such
as a generator's or an exporter's, could neither explain nor sort them,
and its dialog showed settings that don't apply to the choices made.
Each parameter may now say how dialogs show it, in keys that hosts
from before them ignore (plugins::dialog):
- label; unit, after the value ("0.25 mm"); help, on the label; and
helpUrl, an https:// page opened from a button after the field.
- group: the parameters outside any group come first, then each group
as a section that folds, in the order the groups first appear, the
fields lined up down the dialog.
- visibleWhen: {"pattern": ["lines"]} shows a parameter only
while each checkbox or choice it names, declared before it, has one
of the values listed and is shown itself. Manifest::visible decides
every parameter in one pass, in declaration order. A hidden parameter
still goes to the plug-in with its value, so a run never depends on
what the dialog showed.
Two types join number, int, bool and choice: string, a text field cut
to maxLength, and numberList, numbers typed separated by commas or
spaces, each clamped, minItems to maxItems of them. A plug-in declares
up to 256 parameters, at most 64 outside groups. The filter, live-effect
and exporter dialogs use every key. The Appearance panel's editor of a
plug-in effect uses the labels, units, help and conditions, and reads a
typed number list as the dialog does.
dialog.rs tests parsing, the round trip of a manifest written out,
sections, visibility (also of 256 overlapping conditions, which a
recursive check would take forever on) and the keys refused;
manifest.rs the new types and limits. tests_plugin_fields.rs draws a
dialog with kittest: labels and units, sections in order with their
fields lined up, visibleWhen hiding and showing rows, and the help
button opening its page.
appearance.rs checks the editor's labels, units, conditions and a
typed number list, and form.rs units after numbers (a unit starting
with a digit is spaced from it) and typed lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
# Conflicts:
# docs/gaps.md
# docs/target-app-parity.md
A plug-in could filter objects or reshape them as a live effect, but
nothing it made could leave the app: pen plotters, cutting machines and
laser cutters read formats VectorCraft doesn't write. An exporter is a
third kind of plug-in ("kind": "exporter", with the file "extensions"
it writes), in the same sandbox and with the same ABI v1 exports.
- It adds a write-only format, plugin.<id>. document.formats lists it
with its plug-in id, and document.export writes it by that id, or by
a path ending in one of its extensions that no built-in format has;
"params" carries its parameters, checked against its manifest as a
filter's are.
- File › Export › Export As lists it after the built-in formats, with
Use Artboards greyed out, since the plug-in writes the whole
document. One with parameters asks for them in a dialog generated
from its schema (pluginExport) once the file is picked.
- The plug-in is given the native file's JSON (format::json_part:
images of 8 KiB or more without their data) and _context {mode:
"export", extension, name}. It returns {"dataBase64", "warnings"?}
or {"error"}. The host writes the file, and nothing when the plug-in
declines or returns bad data.
- An export gets 10 G instructions plus 4,000 per byte and 300 s.
Background Export's Cancel stops it between two slices of that
budget (Error::Cancelled), and a cancelled live-effect run is not
cached as a failure.
- plugin.run and Object › Plug-ins say where an exporter is instead of
calling it a live effect.
engine/tests/plugin_export.rs reads back what an exporter is handed
with wat::echo_exporter, an exporter whose file is its input or its
parameters (its base64 encoder is written in WAT). The document it is
given is document.save's JSON, without the large image's data, and its
parameters arrive defaulted, clamped and with the file's name and
extension. It also covers listing and removal, built-in extensions
winning, selectedOnly, declines, bad base64, missing data, warnings,
and Cancel stopping a plug-in that never returns. It is a test binary
of its own: installed plug-ins are process-wide, and the format-list
unit tests check exact lists. dialogs/tests_plugin_export.rs drives
Export As headlessly; plugins/tests/abi.rs covers the budget, the
parameters and the echo exporter; format/tests/native_v4.rs covers
json_part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
With Include SVG Code on, Copy offered the SVG markup as plain text with every placed image
embedded as base64: a 13 MB photo made 17 MB of text. A paste reads the text first (eframe on
every paste key; on Linux and macOS it is the one format written, and holds_ours reads it again),
so each paste moved it through the system clipboard on the UI thread, and on GNOME the app
stopped responding.
The SVG markup now goes out as text only while the images it embeds total at most 1 MiB; above
that it is offered as image/svg+xml and PNG. Type keeps its text, and vector art keeps its SVG
text at any size (only embedded image bytes count).
Windows 11, Ryzen 5 2600X, 13 MB PNG, real Ctrl+C: the longest UI stall fell from 823-1021 ms
to 133 ms. Not run on Linux.
Match the Selection tool: Shift on an already selected hit removes it on
release without a drag, including one path of a compound path.
Co-authored-by: Cursor <cursoragent@cursor.com>
Squashed from #2533 onto #2525 (Smudge Stick, Sponge, Watercolor): both sets in PIXEL_EFFECTS (45), the catalogs and the docs, whose counts now read 45/57.
File › Export Selection… collected the selected objects one asset per
object, so a few ungrouped shapes picked to export together came out as
separate images unless they were grouped first. It now collects them as one
asset of them all (`assets.add {multiple: false}`), the selection exported
as one image; `file.exportSelection {multiple: true}` still makes one per
object, and Object › Collect for Export › As Multiple Assets and the Asset
Export panel's Multiple Assets item are unchanged.
dotCooCoo