A filter plug-in gets 50 M instructions and a minute for each run.
Filters that order a plotter's paths, pack shapes or run a simulation
need minutes, and the app shouldn't freeze while they compute.
A filter's manifest may now ask for "budget": "heavy" (Budget): each run
gets HEAVY_FUEL (1 G instructions) and HEAVY_WALL_TIME_MS (300 s). Only a
filter may ask. plugin.install refuses such a filter without allowHeavy:
true, and plugin.inspect returns the entry a module would have without
installing it. Install Plug-in… and File › Open ask the user and install
on OK; the plug-in store keeps the answer, and folder loads skip heavy
filters with a note, since they ask nobody.
The app runs a heavy filter on a thread of its own (plugin_runs), not in
Background Save's queue, with the status bar and a progress window
(Cancel, Continue in Background) that it shares with Background Export
(export_progress::window). FilterRun splits plugin.run: prepared on the
session, run on any thread, its output handed in, and the next
plugin.run with the same params applies that output instead of running
the plug-in again, so the edit stays one guarded, journaled command. A
result whose document or plug-in changed meanwhile is dropped, and the
status bar says to run it again. A cancelled plug-in run is now
EngineError::Cancelled.
What a filter keeps with the document (#3720) goes with the run: it is
given _context.documentData when the run is prepared, and the
documentData of its output is applied with its objects, in the same undo
step, when the run is handed in (FilterRun::finish).
Tests: plugins/tests/abi.rs (100 M loop steps out of a light budget,
within a heavy one; folders skip heavy filters), manifest.rs, engine
tests_plugins.rs (consent, inspect, the store, hand-in, a handed-in
run's document data, cancel) and
ui-egui tests_plugin_runs.rs (installing asks, no Preview, a background
run as one undo step, a stale result kept out, the progress window).
CRAFT_UI_HEAVY_FILTER_WASM=<folder> writes a test filter to try in the
app. Its strings and messages have rows in each complete catalog
(COMPLETE_MESSAGES).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
A filter plug-in had nowhere to keep settings that belong to the whole
document rather than to one object, such as the pens a plotter holds or
a machine profile: it could only ask for them again on every run.
- A filter's output may hold documentData: any JSON of at most 1 MiB
(objects::MAX_DOCUMENT_DATA) that replaces what the plug-in keeps with
the document, null removing it, in the same undo step as its objects
(objects::decode_output). Too much refuses the output and the
document stays as it was.
- A filter gets it back in _context.documentData (null until it keeps
something). A filter reads and writes only its own.
- It is the document's foreign data, Document::unknown["pluginData"] by
plug-in id (vectorcraft_doc::plugin_data), where the perspective grid
and the brushes keep theirs. So the native file needs no section of
its own for it, and hosts from before keep it when they save. An
exporter is given the whole document, so it can read every
plug-in's. Nothing else lists it, as the reference app's Document
Info lists no plug-in data.
A live effect isn't given it: its geometry is worked out from the
object alone wherever it is drawn.
Tests: plugin_data.rs (each plug-in its own entry, forgetting what isn't
kept copies nothing, a damaged value holds nothing), objects/tests.rs
(kept, forgotten, refused over the limit), tests_plugins.rs (one undo
step with the objects, read back, not given to another filter, kept by
the native file among its foreign data, refused over the limit with the
document unchanged, null removes it) and tests/plugin_export.rs (an
exporter finds another plug-in's). The size error has its row in each complete
catalog (COMPLETE_MESSAGES).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
A filter could reshape and repaint objects, but not set the stroke's
join, cap or miter limit, nor the effects an object's appearance holds.
A tool that prepares objects for a live effect (a sheet of samples,
each with the effect at its own settings) had to leave the user to
apply the effect to each object by hand.
- Each input stroke has its join, cap and miterLimit beside its paint
and width (live effects get the same, through the shared encoder),
and each object its own effect records, {id, params, visible}.
- An output stroke may set them (miter limit clamped to 1-500), and an
output object's "effects" replaces its own effects.
- The host admits each record as effect.apply does: an effect that
effect.list lists or an installed live-effect plug-in, parameters it
takes (filled in to their defaults; a plug-in's checked against its
manifest), one 3D effect that fits the object (its fills' and
strokes' own effects counted), and the texture of an effect with
Load Texture (Glass, Texturizer) as the effect stores it, never a
file to read. A record the object already had stays as
it is, so a filter that hands its input back changes nothing. One
refused record refuses the whole output and the document stays as
it was.
The plug-ins crate checks the records' form; which effects exist is the
engine's to say (objects::AdmitEffects, engine plugin::admit_effects).
effects::validate_three_d is the one check of whether a 3D effect fits
an object, for effect.apply, effect.setParams and the filters.
A path handed back as it was now stays the live shape it was: write()
dropped a live rectangle's or ellipse's parameters whenever the output
held a path, changed or not, so a filter that returned its input
turned a live rectangle into a plain path.
objects/tests.rs checks the round trip, stroke styles on existing and
new strokes, the host's refusal, the bad forms refused, and a live
rectangle handed back unchanged (a plain path before the fix);
tests_plugins.rs runs filters that set a built-in and a plug-in effect,
an echo that changes nothing, and six refused outputs.
CRAFT_PLUGIN_FRAME_WASM=<folder> saves a test filter to try in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
A live-effect plug-in was given only its object's geometry. An effect
that draws as wide as the stroke it sits on, or tells its fills apart,
had to ask for them again as parameters, which then went stale when
the paint changed.
A live effect's input object now holds the object's fills and strokes
too, read only and in the form a filter gets them (one encoder,
objects::paint_lists, for both), and _context.item says where the
effect sits: "object", or {"fill": i} / {"stroke": i} for an effect in
a fill's or a stroke's own effects. effects::GeomContext carries the
object's appearance and the item, and the plug-in cache keys on the
paints, so a change of paint runs the plug-in again. Hosts from before
this give geometry only; nothing in the output changes.
Expand worked a fill's geometry effects out in the object's context, so
a plug-in effect there would be told "object" and a gradient fill was
expanded into a shape the canvas doesn't draw: fill_shape now gives them
the fill's context, as drawing does (expand.rs).
Siblings named with a declared prefix, the other half of such context,
are left out: the effected geometry is worked out from the object alone
wherever it is drawn, measured, hit-tested or expanded.
wat::when_given is a plug-in whose output depends on whether its input
or parameters hold a text. tests_plugins.rs uses it to check that an
effect sees the stroke's width and the fill, runs again for a thinner
stroke, and on a second stroke is told so; effect.rs checks the item
counting; a gradient fill under such an effect is drawn and expanded
into the same triangle. CRAFT_PLUGIN_PAINTS_WASM=<folder> saves a test
effect to try in the app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
Install Plug-in (plugin.install) now keeps the plug-in's module in a
Plug-ins folder next to the preferences, as Illustrator keeps plug-ins in
its Plug-ins folder, and the desktop app and vectorcraft-cli install the
ones there at startup (a module that doesn't load is skipped with a log
record, at most 512 MB are read). Remove Plug-in deletes it from the
folder. The Additional Plug-ins Folder preference is still loaded from
where it is. Confined MCP servers and VECTORCRAFT_NO_PREFS keep nothing,
as with the PDF preset and colour profile stores.
Docs: docs/mcp.md, docs/plugins.md, docs/target-app-parity.md.
VectorCraft had an Additional Plug-ins Folder preference but nothing loaded from it. Port
PhotoCraft's wasmi plug-in host (same sandbox, manifest and parameter schema) as the new
vectorcraft-plugins crate (L2), extended for vector documents:
- Object filters read the selected paths and compound paths as JSON (native PathData and
Paint forms: geometry, fills, strokes, gradients, opacity) and return the objects to keep,
change, add or delete; the output is validated in full and applied as one undo step
(plugin.run). A failing plug-in leaves the document untouched.
- Live-effect plug-ins are geometry effects in the appearance stack (effect id
plugin.<id>), re-evaluated (and cached) when the object or parameters change, editable,
exported and baked by Expand Appearance; a missing plug-in leaves the geometry as is.
- plugin.list / info / run / install / remove / reload; the preference folder installs
every *.wasm at startup and when it changes; File > Open of a .wasm installs it (web).
- Object > Plug-ins and Effect > Plug-ins menus with dialogs generated from the parameter
schema (live preview), the Appearance panel's fx menu, docs/plugins.md, an original
example plug-in (Desaturate, a Rust crate outside the workspace) and fuzzing of the
plug-in boundary (engine/tests/plugin_fuzz.rs).
Tool plug-ins and paint-changing live effects are left for later (docs/plugins.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
