Activate visible tabs after a delayed Selection drag and copy artwork through a document-scoped command without changing the clipboard or source. Cancel stale transfers, preserve pattern alignment and transparency, and insert into the editable destination context. Cover pointer gestures, resource rendering, input bounds and locked layers; translate the new labels and messages.
With the Artboard tool, a Shift-press on an artboard toggled it in the
selection and started a move, which Shift kept at 45° steps. A
Shift-drag on the pasteboard drew a square artboard. The reference
app's documentation gives Shift-drag inside an artboard as the way to
draw an artboard there, and Shift-drag on the canvas as a marquee that
selects artboards.
A Shift-click now toggles its artboard when the button comes up. A
Shift-drag inside an artboard draws a new artboard (artboard.new), and
a Shift-drag on the pasteboard toggles every artboard it touches, the
last one added becoming active. Shift no longer constrains an artboard
move or keeps a new artboard square, and no other modifier does. Shift
on the active artboard's handles still resizes it proportionally. The
hint bar names the Shift gestures in every complete catalog, and the
cursor is a crosshair over an artboard while Shift is held.
Escape while a new artboard was being drawn left the tool. Escape
during any drag, the new marquee included, now cancels the drag and
keeps the Artboard tool, as it already did during a move or a resize.
Docs: docs/target-app-parity.md.
The readout was a moving average of 1/dt over any two consecutive frames.
An idle window wakes now and then (a timer, a control request, a repaint
after input) and each wake-up draws two frames about 4 ms apart, the second
one not waiting for vsync because the swapchain has a free image. Every
wake-up pushed the average up by 0.1 x 240 and the idle gap pulled it down
by only 0.1 x 2, so at rest it climbed past the display's refresh rate
(105 fps on a 30 Hz monitor that was drawing 4 frames a second). As soon as
the pointer moved and frames became vsync-paced, it fell back to the real
rate, which looked like a slowdown.
- frame_rate: frames counted over the last second of continuous drawing.
A gap more than 100 ms longer than the previous frame's own work means
the window was idle and starts a new count. The readout changes only
after half a second of drawing, so a wake-up's frames keep the last
rate. Slow frames still read slow, because their gap is their own work.
- chrome: "– fps" until the window has drawn continuously, instead of 0.
Measured on an Apple M4 driving a 30 Hz 4K display: drawing continuously
reads 30; at rest with a wake-up every 0.5 s it stays 30 (before: 45 -> 105).
While an export runs in the background (Background Export), a dialog shows
what is being exported and how far it has got: artboard by artboard for a
raster export of several artboards, busy otherwise. Cancel (also Esc) stops
it and writes no file; Continue in Background leaves it to the status bar.
It opens after 0.4 s and never over another dialog.
Built on the shared vectorcraft_doc::cancel (#2546): fileio::progress::Progress
wraps its CancelToken and a progress sink, so a cancelled export stops
drawing and keeps no half-drawn pattern tile or effect raster.
- ui: background jobs carry their Progress; export_progress draws the
dialog; UI commands file.cancelExport and file.exportInBackground.
- i18n: the strings in every language with complete menus, Danish, Dutch
and Indonesian included; "{n} more exports waiting" is a plural (trn).
- docs: ui-parity, gaps (G12) and ROADMAP rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dt49z1ubK9x1bPq51APgz3
With the Artboard tool in use, the Control bar showed Move and Scale
Artwork with Artboard and then the object controls (Fill, Stroke,
Opacity and the rest). The reference app's help lists the Control
panel, with the Artboard tool, among the places to add, delete,
rename, resize and position artboards, set their orientation and
reference point, and open Artboard Options.
While the tool is in use, the Control bar now shows the active
artboard's controls in place of the object controls: Preset, Portrait
and Landscape, New Artboard, Delete Artboard, the Name field, Artboard
Options, Rearrange All Artboards, the Transform link, Move and Scale
Artwork with Artboard, and the reference point with X, Y, W and H and
the Constrain Width and Height Proportions link. Each control runs the
command its Properties or Transform panel counterpart runs, and the
reference point is the one the Transform panel uses. In an 800-point
window the controls up to the Transform link fit, the two artwork
options show as their boxes with their names in tooltips, and the link
opens the position and size in a popover, as it does for objects.
Docs: docs/target-app-parity.md.
The controls that the shared widgets draw had no name in the
accessibility tree: icon, flat, primary, secondary and split buttons,
chips, toggles, checkboxes, radio buttons, tabs, sliders, the angle
dial, the Reference Point's squares, the spinner and preset arrows and
the searchable combo boxes. Screen readers announced each clickable one
as an unnamed element of unknown role, and a disabled icon button was
not in the tree. The Color Guide's library button, the Color Themes
Save button and the status bar's artboard buttons also had no name.
Each helper in widgets.rs except color_field now gives its response a
role, a name and its state. The name is the text, label or translated
tool tip the helper shows. The spinner, the preset arrow, the angle
dial, the harmony wheel and the Reference Point's squares, which show
none, are named "Step up or down", "Presets", "Angle", "Color wheel"
and Top Left to Bottom Right. A toggle, checkbox, radio button, tab or
Reference Point square reports whether it is on, an icon button reports
that it is pressed while it is lit, the angle dial reports its angle,
and a searchable combo box reports the text it shows. A checkbox or
radio button drawn without text is named by the label beside it. The
Tools panel's tool buttons, flyout rows and floating strips are named
by their tools' tool tips, with the active tool pressed. The title
bar's column toggle, the tear-off bars, a floating strip's close box
and the Color, Gradient and None buttons are named by their tool tips.
The status bar's First, Previous, Next and Last Artboard buttons now
have tool tips, and the Fill and Stroke chips' tool tips are
translated. The six new strings (the four artboard tips, "Color wheel"
and "Step up or down") have rows in every catalog.
split_button, chip_button, color_slider, channel_slider and the dialog
form's slider_field and slider_rail keep their arguments. New _named
variants beside them take the arrow's tool tip, the chip's tool tip or
the slider's name, and every caller in the tree uses them.
Docs: docs/target-app-parity.md.
In the Transform panel, the Properties panel's Transform section and
the Control bar, Ctrl+Enter (Cmd+Return on a Mac) in W or H left the
field active and applied nothing. Now it applies the value as Enter
does and sends `proportional: true` to `object.setBounds`, so the other
side scales by the same factor with the Constrain Width and Height
Proportions link off. With the Artboard tool, the Transform panel's W
and H keep the active artboard's proportions the same way. X, Y,
Rotate, Shear and the number fields of dialogs keep Ctrl/Cmd+Enter as
it was.
- widgets::size_field is a num_field that Ctrl/Cmd+Enter also commits.
- transform::proportional gives the `proportional` param of the W and
H fields: the link, or true after Ctrl/Cmd+Enter.
Docs: docs/target-app-parity.md.
A palette button opens Recolor Artwork when the selection has colours to
recolour (solid colours, gradient stops or mesh points, inside groups too):
in the Contextual Task Bar, before Lock, and in the Control bar, after the
Graphic Style picker. Art painted with None shows no button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Copy and Cut made the system clipboard's formats in the frame that ran
them. The formats include the SVG markup and a PNG of the selection at
1 px per pt, up to 4,096 px a side. In a release build on Windows, Copy
of 50,002 rectangles on a 1600 x 1200 pt page took 1.00 s in its frame.
The thread that writes background saves and exports now makes the
formats from a copy of the clipboard, and the app writes them in a
later frame. The same Copy takes 0.18 s in its frame, and the SVG and
PNG are the same bytes. While that thread has a save, an export, a print or
a recovery copy to finish, Copy and Cut make and write the formats at
once. A later Copy or Cut, or text copied in a field or with the Type
tool, drops formats that are not written yet. Until they are written,
Paste on the canvas takes the internal clipboard, and while a text
field or the Type tool has the keyboard the app waits for them.
Docs: docs/mcp.md, docs/target-app-parity.md.
The status bar's artboard navigator showed only the active artboard's
number between its first, previous, next and last buttons, and it had
no list of the artboards.
The number is now a drop-down field that shows the active artboard's
number and name. Its list shows every artboard by number and name, as
the Artboards panel lists them. Choosing one runs view.goToArtboard,
the command the buttons run, which makes that artboard the active one
(and the Artboard tool's, while that tool is in use) and fits it in
the window. The list lays out only the rows in view and at most one
more, and opens with the active artboard's row in view. In a test
build with 1,000 artboards, the two frames that open the list take
0.12 ms and 0.04 ms, and a frame with the list open takes 0.03 ms. The
timed frames are headless and draw only the status bar.
Docs: docs/target-app-parity.md.
In the View menu, Reset Rotate View was the only rotation item. The
status bar's angle menu set its twelve preset angles by writing the
view's rotation itself, and no command took an angle to turn the view
to.
View › Rotate View now lists the status bar's angles (0°, 15°, 30°,
45°, 60°, 90°, 180°, -15°, -30°, -45°, -60° and -90°) and checks the
one the view is turned to. The new UI command `view.rotate {angle}`
turns the view to any angle about the center of the canvas and
returns the angle it set, normalized to (-180, 180] as a Rotate View
drag normalizes it. The menu's items and the status bar's angle menu
run it from one list of angles; the status bar sets the same angles as
before. Without a document the command returns "no document" and the
items are disabled. Run from the command palette, which passes no
angle, Rotate View opens a dialog that asks for the angle, with the
view's current angle filled in.
The de, it, ja, ko, pl, pt-br, ru, uk, vi and zh-hant catalogs have a
new "Rotate View" row. The strings the catalogs cover leave out the
angle labels, as they leave out Type › Size's point sizes.
Docs: docs/mcp.md, docs/target-app-parity.md.
In the Transform panel, the Properties panel's Transform section and
the Control bar, Alt+Enter (Option+Return) in X, Y, W, H, Rotate or
Shear ended editing as Enter does, and the selection itself moved,
resized, turned or sheared. Now the field's command gets `copy: true`
when the Enter that committed it was pressed with Alt. The copy takes
the value, the original stays where it was, and the copy is selected,
in one undo step. A press elsewhere with Alt held applies the value
without a copy. With anchor points selected with Direct Selection,
Alt+Enter applies the value to them, as Enter does.
- widgets::enter_modifiers returns the modifiers of the frame's Enter
press.
- transform::alt_enter_copies gives the `copy` param of the three
surfaces' commands.
Docs: docs/target-app-parity.md.
The Control bar had no isolation controls. In isolation mode it now
shows an Exit Isolation Mode button (`object.exitIsolation`), except
while a pattern is edited: the isolation bar's Done and Cancel end
that edit. Outside isolation mode, with one group, compound path,
path, image, mesh or placed file selected, it shows an Isolate
Selected Object button (`object.isolate`). After a Direct Selection
click on a path inside a group, the button isolates that path. An
envelope's contents get no button: for them the Control bar shows the
envelope's Edit Envelope and Edit Contents buttons.
The button offers the kinds of object that the Selection tool's
double-click isolates. The double-click's check moves unchanged into
`vectorcraft_tools::select::isolates`, and both use it.
Docs: docs/target-app-parity.md.
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
Save serializes JSON straight into the compressor and writes images from their Arc into the
file; open reads each image into its own buffer, and NodeKind reads its tag first instead of
buffering every node. Already-compressed images are stored rather than deflated again in the
same gzip stream. Limits apply per section, so any file VectorCraft writes opens again. Data
Recovery writes each image once, content-addressed, instead of every interval. Native files open
on a background thread. Files stay readable by main both ways; JSON-only saves are identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Localize native/web file filters, diagnostic labels, numbered presets
and contributor tooltips with English fallback and Czech plural forms.
Fix gradient adjective agreement and disambiguate Japanese printer marks
in PDF/Print choices and summaries. Keep file extensions and names intact.
Add Czech catalog rows and regression coverage; update localization evidence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Preferences hides System Title Bar on macOS and the web, where it did
nothing (it fell through to the plain checkbox row), and lists it with
the window options instead of under Language.
- The next-launch note reuses "Applies the next time VectorCraft starts."
instead of a second wording in every catalog.
- A new window title asks for one more frame: AppKit lays the title bar
out again for it, and the next frame centres the window buttons (#968).
- The menu bar drops the bold branch for the VectorCraft menu it no
longer shows; theme is imported where the tests use it.
- Docs: Language is Preferences › User Interface › Language (VectorCraft
› Language on macOS); the control protocol describes System Title Bar;
ROADMAP Last updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AppKit places close, minimize and zoom in a standard title bar, shorter
than the 44-point app bar they sit over, so they rode high on it. They
are now moved to the middle of the bar, inset from its left as far as
from its top, with the title bar container made as tall as the bar so
they stay clickable. AppKit lays the title bar out again on resize and
when leaving full screen, so the placement runs every frame and sets a
frame only when it is out of place. The app bar keeps the room the
buttons take, measured, instead of a fixed 78 points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Align to Key Object and Align to Artboard worked only from the Align
panel's own buttons: the Control bar's and the Properties panel's align
buttons always aligned to the selection (one object to the artboard).
They are now one set of buttons that follow Align To (and the key
object), and the Properties panel's Align section gets the "…" button
that opens the Align panel for Distribute and Align To.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With more documents open than the tab strip holds, the tabs past its
right edge were cut off with no way to reach them. As in Illustrator, a
» button at the strip's right end now lists every open document (the
active one checked) and picks one, and the strip always shows the active
tab, starting later when it has to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document tabs drew their close box before the title on every platform, the
macOS convention. On Windows, Linux and the web it now comes after the title,
as those platforms' tabs (and Adobe's own apps there) put it; macOS keeps it
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Performance › Animated Zoom (with GPU Performance, which dims it when
off): the Zoom tool dragged sideways zooms about the press (right in,
left out) and held still zooms on (Alt: out); a click still steps. Off,
a drag zooms to the area dragged across, now drawn as a marquee. The
hint bar says which.
- User Interface › Large Tabs: taller document tabs with larger titles.
- User Interface › Scale Cursor Proportional to UI: off, the tool cursors
keep their size whatever the UI Scaling (OS and painted cursors alike).
- File Handling › Display Bitmaps as Anti-aliased Images in Pixel
Preview: off (the default), Pixel Preview samples images nearest-pixel
(`RenderOptions::smooth_images`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On macOS the menus are in the system menu bar, laid out as a Mac app's (Illustrator on the Mac as
the reference), and the app settings sit in the VectorCraft menu: About, Settings ▸ (one item per
Preferences page, General… ⌘K), Language ▸, Appearance ▸ (UI brightness), Services, Hide
VectorCraft ⌃⌘H (⌘H stays View › Hide Edges), Hide Others ⌥⌘H, Show All and Quit ⌘Q (the app's own
quit, so unsaved documents are asked about); they leave Edit and Help. Window gets Minimize ⌃⌘M,
Zoom and Bring All to Front; Help is the system's Help menu. Windows, Linux and the web keep the
in-window menu bar unchanged; --in-window-menus or VECTORCRAFT_IN_WINDOW_MENUS keeps it on macOS
too, and so does a menu bar AppKit refuses to build.
One menu model: the in-window menus and the native bar draw the same rows (menus::entry), and the
platform-free native_menu module lays them out, decides when to update (a cheap state hash; labels,
enabled and checked in place, a rebuild only when the structure changes) and hands key equivalents
back to egui as the key presses they were, so shortcuts, user overrides and focused text fields
behave as in the window and nothing fires twice. The muda backend (pinned =0.21.1, macOS only, no
unsafe) is apps/vectorcraft/src/mac_menu.rs, mirroring PhotoCraft's. ui.inspect reports
nativeMenuBar. Translations for the new labels in ja, es, zh-hans, zh-hant, cs and pt-br.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Control bar's underlined Transform link opens the Transform panel as a
popover under it (reference point, X/Y/W/H, Rotate and Shear with their icons
and angle presets, flips, shape properties, Scale Corners, Scale Strokes &
Effects), as the Stroke link does the Stroke panel. X/Y/W/H stay inline while
the bar has room.
The reference point locator is now nine squares with the outer eight joined
around the box; the old outline was inset off the squares' centres.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reported: Alt-click with the Pen should toggle an anchor between corner and smooth, and the
Control bar had no way to make a corner anchor smooth.
v0.5.0 already has Pen + Alt as the Anchor Point tool (#473) and the Control bar's and the
Properties panel's Convert buttons for direct-selected anchors, the path being drawn included (its
last anchor is selected). The remaining gap: with Direct Selection, the Pen, the Curvature or the
anchor tools, a path selected as a whole shows all its anchors selected, yet the Convert buttons
only appeared once anchors were direct-selected.
- chrome::anchor_controls decides what the Control bar and the Properties panel show: Convert and
Anchors for direct-selected anchors (as before), Convert alone for paths selected as a whole
with a tool that edits anchors (path.convertAnchors already converts every anchor of those);
Remove and Cut still wait for anchors direct-selected, as they act on those only.
- Tests: the Control bar and the Properties panel offer Convert for a whole rectangle with Direct
Selection and the Pen, not with the Selection tool, and smooth converts every corner; Pen + Alt
on the path being drawn makes a smooth anchor a corner (click) and a corner smooth (drag), and
drawing goes on. ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
aiongg