A document keeps up to 25 saved views, but the View menu listed only the
first 10, so views 11 to 25 could be saved and never chosen. All 25 are
listed now, by name, and choosing one changes the current window to its
zoom, centre and rotation (within the canvas's zoom range).
Edit Views… used to open the generic parameter dialog on the first view,
where the name of the view to change had to be typed. It now opens a list
of the document's views, like Edit Selection…: pick one to rename it or
delete it; OK applies every change as one undo step and Cancel leaves the
views as they were. view.saved.edit takes {edits: [{name, newName?,
delete?}…]} for that, the one-view form still works, and the command is
off while the document has no saved view.
A file's views are untrusted: on open at most 25 are kept, names are
trimmed, capped at 255 characters and unique, and views without a finite
centre and a positive zoom are dropped. New View… starts from the first
free "View N" and caps names the same way.
Behaviour from the public help page "Use multiple windows and views":
https://helpx.adobe.com/illustrator/using/viewing-artwork.html
docs/gaps.md (G7) and docs/target-app-parity.md take New View/Edit Views
off the missing list; docs/mcp.md documents the view.saved commands; the
catalogs get the Saved View 11-25 rows in the pattern of 1-10.
Found while testing crates/doc/src/lib.rs:363-373 (parse_measure pica branch)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A paragraph split between two threaded frames took its first-line
indent again at the top of the next frame, and a list paragraph drew
its bullet or number there again. Each frame is laid out on its own,
and its first paragraph kept every paragraph attribute there.
A text object now marks a frame whose first paragraph continues from
the frame before (first_para_continues, not saved). The thread re-flow
sets the mark where each frame's share starts inside a paragraph and
measures each share with it, and a restored document reads the marks
from its saved text. Area type and type on a path set the first line of
such a paragraph as a wrapped line: no first-line indent and no bullet
or number. The paragraph after it takes the next number. Release
Selection, Remove Threading, Convert To Point Type and copies of a
frame clear the mark, so the first paragraph there has its indent and
bullet or number again. When Create Outlines, Expand or Expand
Appearance takes frames out of a thread, a frame that stays keeps the
mark only while it is threaded and the frames before it end inside a
paragraph. A frame whose mark changes lays out its first line again,
and when it is still threaded, its thread re-flows. When the outlined
frame is the last one, the text it has no room for is measured as the
frame lays it out: without the first-line indent when it continues a
paragraph, and with its numbers counted on from the frames before it.
The frame before it now takes exactly the text the last frame has no
room for. Duplicates, copies dragged in the Layers panel, the copies
that Release to Layers (Build), Release Opacity Mask and Edit Opacity
Mask make, and Draw Inside's clipping copy then have their cached
bounds computed again, as paste already does for pasted type.
Docs: docs/mcp.md, docs/target-app-parity.md.
A save without options reuses the options the document was last saved
with in that format. Their artboard, artboards and range name artboards
by number, so once artboards were deleted or moved, the save wrote
other artboards or was refused: with three artboards, a PDF saved with
range "2" wrote the third artboard after the first was deleted, and one
saved with range "1, 3" was refused after the third was deleted. The
same held for SVG saves, a legacy .ai, and .ai and native files saved
with separateArtboards. file.formatOptions and SVG Options showed the
same numbers.
The document now keeps the ids of the artboards it had when it was
saved, and the remembered pick follows them: an artboard deleted since
is left out, one that moved is named by its new number, and the rest of
the pick is kept. A range open at its end ("2-") is written out as the
artboards it named once artboards are added. When none of the artboards
the save used is left, the pick is left out, and the save writes the
artboards it writes when none is named. A range of "all" stays as it
is. An artboard given to the save is still refused when the document
does not have it.
A new artboard no longer takes the id of an artboard deleted earlier in
the same document (Document::retire_artboard_id), or of one an undo took
away: the highest id given out is shared with the undo history, so a
new artboard is not taken for an earlier one.
file.revert keeps the pick only when the file read back has the
artboards the document had at the save, with the same ids in the same
order. A PDF saved with a range holds only those pages, and one saved
without preserveEditing reads back with new ids in page order, so their
picks are left out.
CodeRabbit findings #32, #38, #41, #44, #102:
- A frame (and a PDF export) draws symbol instances holding at most 16M objects together
(`vectorcraft_doc::MAX_SYMBOL_NODES`): nested instances multiplied past the depth limits.
- A dotted guide whose control polygon would make more than 100,000 dashes is drawn solid.
- Groups blending with their backdrop, drawn twice each, are drawn isolated past 4 nested.
- An image is decoded only while it and the images paints hold fit twice the decode allowance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Many tools note things on SVG objects in attributes of their own XML
namespace: a plotter's pen, a cutter's passes, a game engine's
collision flag. Import dropped them, so a file that went through
VectorCraft lost what other software had set on its objects. #522
asked for unknown and data-* attributes to survive a round trip; #580
kept the data-* ones, and this keeps the ones in other applications'
namespaces.
- Import keeps every attribute in a namespace that isn't SVG's,
XLink's, XML's, Inkscape's, Sodipodi's or VectorCraft's own, on the
object or layer it belongs to, in order, with its namespace URI and
the prefix the file gave it (ObjectAttributes::foreign, beside the
data-* attributes and the event handlers). The file is untrusted: at
most 64 per object and 64 KiB per value, and what is left out is
warned about. Files that declare no other namespace skip the scan.
- They are the object's own, as its data-* attributes are: a pasted
copy and a duplicate keep them, and deleting the object takes them
with it. The native file keeps them in the object's attributes, a
key written only when an object has some.
- Export writes them back on the same elements and declares each
namespace once, on the root, under the file's prefix. A prefix the
export uses itself, or that another namespace already has, becomes
prefix2, prefix3...; one XML keeps for itself (xml...) becomes ns. A
name or value XML can't hold is left out with a warning.
Nothing in VectorCraft reads them, and nothing in the UI lists them.
svg/tests/foreign_attributes.rs: a layer's and a shape's attributes
survive import, export and import again, Inkscape's and Sodipodi's
own aside and with no warnings, and the native form round-trips;
prefixes are made unique, and bad names and values are left out with
a warning; the caps hold and are warned about once.
engine tests_attributes.rs: a pasted copy and a duplicate keep them, a
deleted object leaves none behind, and the native file and SVG export
keep them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
The Artboard Options help pages describe two display options
(https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/modify-display-settings-of-artboards.html,
.../set-video-display-options-for-artboards.html): a mark at the artboard's
center, and lines from the middle of each side through the center. The
document already had show_center_mark and show_cross_hairs on Artboard, but
nothing set or drew them.
artboard.setProps (each `artboards` entry too) and artboard.new take
showCenterMark and showCrossHairs as true/false, in the same single undo
step as the other fields; a locked artboard can still change them.
Artboard Options has both checkboxes, filled in from the artboard whether
it opens from the panel or a double-click with the Artboard tool, and its
New Artboard form passes them to artboard.new. The canvas draws them in the
new theme token artboard_mark, 1 point wide on screen at any zoom: a cross
12 points across at the center whose arms follow the artboard's sides, and
the two cross hairs. They are screen-only like the edges; exports and print
never read the fields. inspect_document reports them when on. Saved files
are unchanged: the two keys were already always written, so a document that
never shows them saves byte for byte as before, and a file without the keys
opens with both off. Video safe areas, video rulers and the pixel aspect
ratio are not part of this change.
Verification: artboard_display_marks_are_set_and_cleared_in_one_undo_step,
artboard_display_marks_round_trip_through_the_native_format,
artboard_display_marks_stay_out_of_exports (SVG and PDF identical with the
marks on and off), an_artboard_shows_its_center_mark_and_cross_hairs
(positions, screen-constant size under zoom, rotated view) and
artboard_options_show_center_mark_and_cross_hairs. cargo xtask ci: all 10
steps passed.
A filter plug-in had nowhere to keep settings that belong to the whole
document rather than to one object, such as the pens a plotter holds or
a machine profile: it could only ask for them again on every run.
- A filter's output may hold documentData: any JSON of at most 1 MiB
(objects::MAX_DOCUMENT_DATA) that replaces what the plug-in keeps with
the document, null removing it, in the same undo step as its objects
(objects::decode_output). Too much refuses the output and the
document stays as it was.
- A filter gets it back in _context.documentData (null until it keeps
something). A filter reads and writes only its own.
- It is the document's foreign data, Document::unknown["pluginData"] by
plug-in id (vectorcraft_doc::plugin_data), where the perspective grid
and the brushes keep theirs. So the native file needs no section of
its own for it, and hosts from before keep it when they save. An
exporter is given the whole document, so it can read every
plug-in's. Nothing else lists it, as the reference app's Document
Info lists no plug-in data.
A live effect isn't given it: its geometry is worked out from the
object alone wherever it is drawn.
Tests: plugin_data.rs (each plug-in its own entry, forgetting what isn't
kept copies nothing, a damaged value holds nothing), objects/tests.rs
(kept, forgotten, refused over the limit), tests_plugins.rs (one undo
step with the objects, read back, not given to another filter, kept by
the native file among its foreign data, refused over the limit with the
document unchanged, null removes it) and tests/plugin_export.rs (an
exporter finds another plug-in's). The size error has its row in each complete
catalog (COMPLETE_MESSAGES).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
Found while testing crates/doc/src/lib.rs:379 (number_unit, reached from parse_measure at :374)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
File › Place with Link kept a link only to raster images and VectorCraft
documents. A PDF, .ai or .ait page was always embedded as a group, so
Update Links never saw a newer version of the file.
A new preference, File Handling › Link Placed PDF and .ai Files
(linkPlacedPdf), is off by default. With it on, Link places the page as
a placed document, as it places a VectorCraft document: the object
keeps the file's bytes, a preview, the page number and the page's box
(crop, art, trim, bleed or media, stored as page_box). Links check,
update and relink it, Break Link and Object › Expand give the group
placing it without Link gives, every output draws the page's vectors,
and saving and reopening keep the link. With the preference off, or
with a password or textAs: "outlines", the page is embedded as before.
EPS and PostScript .ai files are still embedded.
Package copies a placed PDF or .ai file as it is. The Place dialog's
Link tooltip describes a PDF or .ai file as a document while the
preference is on. Relinking a placed document to a file that is not a
VectorCraft document, a PDF or a PDF-compatible .ai file says so.
Docs: docs/mcp.md, docs/target-app-parity.md.
A click with the Selection tool on a guide selected with objects makes
it the key (select.key {guide}), drawn thicker; a click on it again
cancels it. Align to Key Object is on with one object and a selected
guide and makes the guide the key. object.align lines the objects (or
selected anchors) up on the guide's line and leaves the guide where it
is: a vertical guide sets x only, a horizontal one y. The selection
keeps key_guide beside key, never both; it goes with the guide or the
objects, and follows the guide when earlier guides are deleted.
Distribute Spacing doesn't space from a key guide.
Labelling to a hundred and twenty-eighth left the left ruler unreadable: it
spells a label one character per line, 8.5 pt apart, and at zoom 50 the step is
1/64 with labels 56.25 pt apart while "0.015625" needs 61.5 pt. At zoom 100 it
is "0.0078125" in the same space.
The label ladder stops at a sixteenth, as the report says Illustrator's does,
so zooming in past that leaves the labels where they are and only the ticks
between them grow denser -- down to a hundred and twenty-eighth, which is the
32nds, 64ths and 128ths the report expects to appear unlabelled. Every label is
at most the six characters of "0.0625", which fits the 50 pt the ladder leaves.
Zooming in on an inch ruler stepped through 0.2, 0.1 and 0.05 of an inch:
`Unit::ruler_step` picked from one decimal ladder for every unit, and the
rulers divided whatever it returned by ten. A tenth of an inch is not a mark an
inch ruler carries (#2827).
Below an inch the steps are binary fractions now, 1/2 down to 1/128, and
`Unit::ruler_minor` gives the unlabelled ticks between two labels: an eighth of
the step on an inch ruler, so every tick is a binary fraction of an inch and
they stay about as dense as the tenths elsewhere. An inch and wider keeps the
shared ladder, and the metric units, points, pixels and picas keep their
tenths. Ruler-tick snapping follows the ticks that are drawn, which moves an
inch document's Shift-drag of a guide onto the same grid.
`ruler_label` took its decimals from `(-step.log10()).ceil()`, which writes
1/16 as "0.06" and 1/8 as "0.13" -- wrong values, not just rounded ones. It
uses the fewest decimals that write the step exactly, and drops trailing zeros
as `Unit::number` does, so a sixteenth-inch ruler labels the inch `1` rather
than spelling `1.0000` down six lines of the vertical ruler.
VectorCraft had no Objects on Path. A click with the Objects on Path
tool attaches the selected objects to the path clicked. The tool is in
Edit Toolbar's Modify section and the Blend tool's flyout, and Object ›
Objects on Path › Attach and the context menu with two or more objects
selected choose it. The objects and the path go into an Objects on
Path group with the path at its bottom.
- object.objectsOnPath.attach orders the objects column by column from
left to right and top to bottom in each column. The first one sits
on the path's first anchor, the last one sits on the end of an open
path, and the rest are spread evenly by length; a closed path takes
them all the way round. Each object's attachment point (Pivot, one
of nine, default the center of its bounds without strokes) sits on
the path, and the object is turned to the path there. An object that
was rotated by an angle other than a multiple of 90° is first turned
to the nearest multiple of 90°. Rotate tilts every object by that
many degrees counter-clockwise. Symbol instances are measured by
their art. Guides, compound paths, type, paths without length and
graphs are refused with a reason.
- After every edit the objects go back on the path: editing the path
moves them, an object moved on its own goes back, and objects moved
into or out of the group in the Layers panel join the end of the
path or leave it. Scaling, shearing or reflecting the whole group
keeps each object's scale, shear or reflection, and the objects are
spread evenly along the transformed path again. Undo takes the path
and the objects back in one step, and a copied group stays live on
its own path.
- object.objectsOnPath.options changes Pivot and Rotate, and
object.objectsOnPath.expand leaves a plain group. Both act on the
groups that `ids` names, or on the groups of the selection when
`ids` is not given.
- The native file keeps the group live; SVG, PDF and the other exports
write plain art. The tool highlights the path under the pointer, has
a cursor entry, and Escape during a press cancels the click.
Part of #2545
Docs: docs/mcp.md, docs/target-app-parity.md.
Found while testing crates/doc/src/lib.rs:274 (Unit::named)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Justification… was a disabled stub, and justified
lines stretched word spaces between fixed limits (80% to 150%).
Each paragraph now has Justification options: Word Spacing, Letter Spacing
and Glyph Scaling (Minimum, Desired, Maximum, in percent), Auto Leading and
Single Word Justification. Desired applies to every line; a justified line
fills its measure with word spacing first, then letter spacing, then glyph
scaling, each within its range, and past them its word spaces take the
rest. The Every-line Composer scores lines by that flexibility. Auto
Leading sets the leading of characters whose leading is Auto. A justified
line holding one word is spread between its letters (Full Justify) or
aligned left, centre or right.
The defaults are the documented ones (80/100/133, 0/0/0, 100/100/100, 120,
Full Justify), saved only when they differ. Because the default maximum
word spacing is 133%, justified paragraphs break differently than before;
the Every-line Composer's second pass is now unbounded for justified text
(it used to give up past four times the stretch and fall back to the
Single-line Composer, which the narrower default range would make common),
and lines that can't stretch at all are still refused.
text.setFormat takes wordSpacing, letterSpacing, glyphScaling ([min,
desired, max] or {min?, desired?, max?}), autoLeading and
singleWordJustification; Minimum ≤ Desired ≤ Maximum must hold or nothing
changes. Paragraph styles carry the options (New and Redefine capture
them), and Reset Panel resets them. Justification… opens a dialog
(ui.justification) with Preview; OK is disabled while a row is out of
order. Live SVG text places characters the options move, and a glyph that
Glyph Scaling scales is stretched to its width; PDF uses the glyphs'
transforms. Vertical type isn't glyph scaled; type on a path doesn't use
the options.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2755.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On an edge two artboards share, the artboard to the right of it or below
it holds a point, except at the end of the edge that lies on that
artboard's bottom or right edge, such as where both artboards' bottom
edges meet. There the first artboard holds it, or the last when
topmost. The doc comment and the test comments now say so, and the test
asserts that corner.
Rearrange All Artboards, Select › All on Active Artboard (for objects
with no area), Copy's source artboard for Paste in Place, Align to
Artboard without an index, Crop Image, the Crop Image tool, Place with
`at`, CSS positions and a filter plug-in's artboard decided whether a
point or an object's center is on an artboard with Rect::contains,
which leaves out the right and bottom edges. A line along an artboard's right or
bottom edge was on no artboard: Rearrange left it behind, and All on
Active Artboard did not select it. Document::art_on_artboard counts
art flush with those edges (#890).
They now count the edges as art_on_artboard does, within a millionth
of a point. On an edge two artboards share, the artboard to the right
of it or below it still holds the point. All on Active Artboard
selects a line on a shared edge from either artboard. A press exactly
on a right or bottom edge now picks that artboard, and the Artboard
tool's cursor shows Move there.
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
Object › Graph › Column… was a menu stub, so a graph's columns and bars
were always plain rectangles. The reference app fills them with a graph
design, vertically scaled, uniformly scaled, repeated with a value for
each copy, or stretched at a guide line.
graph.column (Column…) draws the columns, bars or stacked segments and
the legend swatch of the series picked with Group Selection with a
design saved by Object › Graph › Design. Vertically Scaled stretches the
design to each column's length at the column's width. Uniformly Scaled
scales it both ways to that length and centers it on the column.
Repeating stacks a copy for each Each Design Represents value out from
the zero line, and For Fractions chops the last copy at the value or
scales it down. Sliding keeps the part above the design's horizontal
guide line in proportion and stretches the part below. The design and
its options are saved with the graph, and the graph follows the design
when it is renamed or deleted. Columns drawn with a design cast no drop
shadow.
A marker or legend design made of one path is now drawn in a group of
its own. Painting a series with Group Selection then leaves the design's
paint alone, as it already did for designs of several objects.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object > Live Paint > Gap Options was a stub, and paint leaked through
any gap between the paths of a Live Paint group. The reference app's
Gap Options stop paint at small gaps, close them with unpainted paths
and preview them on the canvas.
livePaint.gapOptions (Gap Options) sets a group's options: detect (Gap
Detection), size (small 3 pt, medium 6 pt, large 12 pt, or a custom
size over 0 up to 72 pt), color (the Gap Preview Color, #rrggbb or a
layer color's name) and closeGaps, which adds an unpainted path across
each gap to the group's paths. A gap runs from a loose end of a path
to the nearest point of any path within the size, unless the paths
already join the two close by. With detection on, the faces are made
again as if a line closed each gap, and each face or edge keeps the
look of the old one it lies in or on. The options are stored on the
group, so they are saved, copied and undone with it, and Expand drops
them. Merge keeps the bottom group's options when its Gap Detection is
on, or else turns Gap Detection on with Small when another merged
group has it on. When Gap Detection is off in every merged group,
Merge keeps it off. livePaint.info lists the options and the gaps up
to the size wide that no path closes.
The menu item opens a Gap Options dialog. With Preview on, the options
apply live and the gaps show on the canvas in the preview color, and
OK keeps them as one undo step. vectorcraft-pathops gains find_gaps
and live_paint_with_gaps.
Docs: docs/mcp.md, docs/target-app-parity.md.
i18n: the 19 complete catalogs have rows for the dialog's labels, and
bg's Gap Options menu label now names gaps instead of line spacing.
Window › SVG Interactivity was a disabled menu item. VectorCraft could
not attach JavaScript to an object's events or link JavaScript files
for SVG export.
The SVG Interactivity panel lists 19 events, from onfocusin to
onscroll. Pick one, type its JavaScript and press Enter to add it to
the selected objects; the list shows their events. Remove Selected
Entry removes the picked event, and the panel menu's Clear Events
removes all of them. Link JavaScript Files… opens the JavaScript
Files dialog, which adds a path or URL to the document's list and
removes the selected one. Its Choose… button puts a picked file in
as a file:/// URL. The commands are svgInteractivity.info,
setEvent, removeEvent, clearEvents, addFile and removeFile, and
ui.javascriptFilesDialog. Each edit is one undo step. A document
links at most 64 files.
SVG export writes each event as an event attribute on the object's
element and each file as a <script xlink:href> element. With the SVG
Tiny 1.2 profile, export leaves the events out with a warning. SVG
import reads the listed event attributes and the script links back
as text. It never reads a linked file or runs a script, and it leaves
inline scripts and the links after the first 64 out with a warning.
The native format keeps both.
An unnamed <g> with data-* attributes of its own around a single
object now imports as a group. Before, import folded it into the
object, which then took the group's data-* or, when it had its own,
dropped the group's. An unnamed <g> with event attributes stays a
group in the same way. The SVG import fuzz tests now include event
attributes and <script> elements.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
docs/ui-parity.md.
Native files remember the grid like the saved view, so reopening restores it.
Toggling it is still view state: no undo step, document not marked modified.
Fixes#1968
The MCP server read one line, ran it and answered it before reading the next,
so notifications/cancelled was never seen during a call and every request
(even ping) waited behind a running export.
- vectorcraft_doc::cancel: a thread-local cancel token and progress sink that
long work polls. Checkpoints: PDF pages, PDF flattening, geometry bake,
raster-effect flattening, drawing objects, raster artboards, and before any
file is written. A cancelled command returns EngineError::Cancelled and
changes nothing.
- Server::serve reads on its own thread: notifications/cancelled drops a
queued request or stops the running one (no reply, as the MCP spec says),
engine-free requests (ping, the list methods, prompts/get) are answered at
once, a request that would wait behind a call running for 2 s is refused
with -32003 naming that call, and _meta.progressToken gets
notifications/progress (page n of m). Queue and output are bounded.
- The remote backend stops waiting for the app when the call is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
Unit fields and length strings read a percentage operand as a share of
a value. After * or /, the percentage scales the term before it:
3cm*50% is 1.5 cm and 3cm/50% is 6 cm. After + or -, it adds or takes
away that share of everything before it: 50pt+25% is 62.5 pt and
100pt+20pt-50% is 60 pt. Before this change these expressions read as
nothing, and the field kept its old value.
The parser now splits a sum at its last + or -, so a percentage applies
to the whole sum before it. Text without % gives the same values as
before, apart from float rounding. A percentage on its own (50%) still
reads as nothing, and percent and degree fields still read % as their
suffix.
Command length strings use the same parser: file.new's width and
height, the distance params and the length preferences.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
Store the registration point with the symbol and place instances so that point lands on (x, y). Symbol Options exposes the same 9-point control as Transform.
Co-authored-by: Cursor <cursoragent@cursor.com>
An Intertwine group keeps its objects as they are, in their own stacking
order; each member can be drawn over the others in an area of its own.
The group draws, hits, saves and exports through its live expansion, so the
members stay editable and Release gives them back unchanged.
object.intertwine.arrange picks an overlap area by a click point or by a
closed path drawn around overlaps and toggles which member is on top
there, or brings a member to the front or sends it to the back where three
or more objects overlap.
Found while testing crates/doc/src/lib.rs:~298 (parse_measure, picas+points branch)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Found while testing crates/doc/src/lib.rs:269-297 (parse_measure, used by Unit::parse and parse_number)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
The decoder's 512 MB limit is on the file's samples; a grey image within it
is four times that once converted to RGBA for the Eyedropper or a recolour,
which the web build can't allocate. The size is now read from the header and
held to the allowance the importers and the renderer use.
A native file (or a pasted document) whose node, slice or asset ids or whose
next-id counter sit at u64::MAX made the next allocation overflow: a panic
with overflow checks, a wrapped counter handing out ids already in use
without. fix_next_id now leaves ids and counters from 2^62 up out of the
count, so new ids start under them; alloc_id saturates. Artboard and graphic
style ids take the smallest free id when the largest is u32::MAX instead of
wrapping to the reserved 0.
ashokram-si