symbol.delete {names} expands every instance of the named symbols,
round by round, before it removes any definition, so a symbol and the
one placed inside it delete alike in either order. The Symbols panel's
picks belong to the document they were made in, and a single picked
symbol is deleted only while symbol.unused still lists it.
symbol.unused lists the symbols nothing places: instances in the art
(opacity masks included), graph designs, pattern tiles and brush art
count, and so do instances in a used symbol's art. The Symbols panel
menu's Select All Unused shows them selected, and Delete Symbol asks
once and deletes those still unused in one undo step
(symbol.delete {names}).
A 16-bit piece holding half of a UTF-16 surrogate pair was placed with
U+FFFD in its place; the document is now refused. A pair split between
two pieces is decoded as one character.
A field with no result (no separator, never ended, or nested past 64)
is left out with its own warning, and the warning about fields placed
as their results is given only for fields that have one.
File > Place reads a Word 97-2003 document (a compound file named .doc,
or one that holds a WordDocument stream) and sets its main text as area
type, as it does for .rtf and .docx files. The text comes from the
piece table, in 16-bit Unicode or compressed 8-bit pieces. Formatting
is resolved from the style sheet's default font, the paragraph style,
the character style and the direct character and paragraph properties,
and keeps the same properties the .docx reader maps.
Table cells are separated by tabs and each row is a paragraph, and a
field places as its result. Hidden and deleted text, pictures, headers,
footers, notes, comments and text boxes are left out, and the reply's
warnings name each kind of content left out or changed once. Word 6.0
and Word 95 documents, encrypted documents and documents last saved
with fast save are refused, and so are structures that lie outside
their streams.
The compound file is read with the cfb crate (MIT), which adds one
package to Cargo.lock.
Cmd/Ctrl held with the Pen lends the last-used selection tool (Direct
Selection until one is chosen), which already moved anchors, straight
segments and curves of the path being drawn, one undo step each, and
handed the path back to the Pen.
With the Selection tool used last, the lent tool hit-tested the
bounding box even though the canvas hides it while anchors are selected
on their own, as the end anchor of a path being drawn is. Over the
path it showed a resize pointer, and the drag scaled the path by a
handle nobody could see: a flat path did nothing at all.
The Selection tool's handles now take the pointer only while the box is
shown (View > Show Bounding Box, no anchors selected on their own), so
the lent Selection tool moves the path being drawn.
Tests: select::tests::hidden_box_handles_take_no_press_while_anchors_are_selected,
tests::draw2::pen_cmd_drag_edits_anchors_and_segments_and_goes_on_drawing.
- A radial gradient from a spot swatch to a CMYK color is written as a
DeviceN shading (ShadingType 3) of Yellow and the spot ink.
- A Lab spot color used as a flat fill and in a mixed gradient is
written as one Separation space with the Lab alternate, which the
DeviceN space names under /Colorants.
- docs/roadmap.md lists the gradients that still export without the
spot ink: mixed spot/process gradients in SVG and PDF gradients with
RGB or Lab stops. docs/target-app-parity.md also notes that a
Perceptual gradient is written to PDF as an image.
A linear or radial gradient whose stops mix a spot color with process
colors, or two spot colors, was written in process colors with a
warning. It is now written as a DeviceN shading of the process inks
its stops use and its spot inks, so each spot ink separates onto its
own plate. An off-center midpoint becomes a stop with the inks halfway
between its two stops. A gradient that mixes a spot color with RGB or
Lab colors is still written without the spot ink, with a warning that
says so.
A stored projection whose determinant is not finite is read back as the
same map divided by the largest magnitude in its w row, the scale the
overflow branch of conjugated already uses, so points that overflowed at
the stored scale draw: the identity with every entry 1e308 maps (2, 2)
to (2, 2). The overflow branch of inverse scales the map so that the
largest of the products its determinant sums is near 1, so a map with
large entries and a small w row, such as a scale by 1e305 with a move
by -3.9e307, is still inverted and read back.
The two overflow tests in persp_text.rs build their stored projections
with a w row of 1, so they still overflow after the read-back.
The reply's index came from the last object the effect was added to, while
its item came from the first selected object (or the first target for an
explicit item). When those objects held different numbers of effects on the
row, the reply named no effect of that object. The index is now read from
that object's effect list.
Double-clicking the Objects on Path tool opens Objects on Path Tool
Options: a nine-point Pivot grid, a Rotate field, Reset (the center and
0) and Save. Save sets the tool's options, which last across tool
switches and are saved with the preferences. The tool sends them with
each attach, and object.objectsOnPath.attach without pivot or rotate
uses them, so they apply to the objects attached next; groups attached
before keep theirs.
While Caps Lock is on, the tools whose pointer General > Use Precise
Cursors changes show the crosshair, and the saved preference does not
change. The desktop app reads the lock state on macOS, Windows and
Linux X11 and passes each change to the new view.capsLock command. A
change to view.capsLock or usePreciseCursors through app.run refreshes
the canvas pointer. The view.preciseCursors command is labeled Use
Precise Cursors, so command search finds it by the preference's name.
Ungroup multiplied each member's opacity by the group's, so a member of a
50% group stayed at 50% after the group was gone, and members that
overlapped showed through each other. Each member now keeps its own
opacity, and the group's opacity is removed with the group.
A Mesh tool click within the hit tolerance outside a gradient mesh hit the
mesh, but object.mesh.addLine looked for the point inside the outline only
and failed with "point is outside the mesh". The same click on a path's edge
made a 1x1 mesh without the line.
- GradientMesh::locate_within takes a tolerance: a point outside the mesh
within it of the outline gives the nearest point of the edge.
- object.mesh.addLine and object.mesh.create take an optional `tolerance`
(0 by default), and the Mesh tool sends its hit tolerance.
A menu under each of the five tiles in Pattern Brush Options lists None,
Original and the document's pattern swatches; the corner menus keep the
four automatic corners. A swatch choice copies the swatch's whole art and
its tile frame into the brush, so the brush keeps drawing after the swatch
is deleted, and the menu then shows that art as Original. Side cannot be
None: OK shows "You must choose a side pattern." and keeps the dialog open.
brush.options takes side_tile, outer_corner_tile, inner_corner_tile,
start_tile and end_tile (a pattern name, none, original, the corner auto
ids, or {"pattern": name} for a swatch named like one of those words), and
rejects side_tile "none" and unknown names before editing.
The question for brushes no stroke uses reads "Delete the brush selection?" with Yes and No, from the bottom button and the panel menu, and Alt-click (Option-click on macOS) on the button still deletes them without asking. When a stroke uses one of the brushes, the button, Alt-click and the menu item ask with Remove Strokes and Cancel; Remove Strokes deletes the brushes and the strokes that used them become plain strokes.
brush.unused also counts the tile that pattern editing's Cancel puts back, which brush.delete already clears, so the panel asks the in-use question for a brush only that tile uses.
SVG export ignored an image's colorize paint and wrote the image's own
black, white and gray pixels. EPS export flattened every colorized image
into a process-color raster, so a spot color lost its plate. Both now
write the image in the fill color, with the coverage the canvas and PDF
export use (darkness times alpha), so white and transparent pixels take
no color.
- SVG writes a coverage PNG as a mask over a rectangle in the color,
shared between repeated images while each keeps its own color. Linked
mode writes the coverage PNG as a file, and SVG Tiny 1.2 writes a PNG
in the color. A colorized image whose pixels are missing, or whose
grayscale pixels can't be decoded, is left out with a warning.
- EPS writes fully covered or uncovered pixels as an imagemask in the
color's process or Separation ink (Registration on every plate), and a
grayscale image as ink samples scaled by coverage. Level 3 masks its
uncovered pixels out and Level 2 writes them white; gray midtones are
written over white, with the existing warnings.
- EPS flattening no longer counts a solid colorize paint on a grayscale
or 1-bit image as transparency by itself. Opacity, blending modes,
opacity masks, effects and overlapping transparent art still flatten
it, and so does a colorize paint the writer can't draw.
The svg crate's tests turn on resvg's raster-images feature to render
the embedded PNGs.
Docs: docs/mcp.md, docs/target-app-parity.md.
Blends, envelopes, repeats and Intertwine groups that hold a pattern fill
with a transparent tile image were each expanded under a limit of their
own, so many of them together had no limit. Their art now counts toward
the same limit as the pattern tiles, and an object whose art would pass
it stays live.
EPS export expanded the pattern fills whose tile images need flattening and
then flattened the result with flatten_document, which expanded them again
with a new object limit. PostScript printing did the same, on the layers
shown rather than the layers that print. EPS export now flattens the
expanded document without expanding it again (flatten_expanded), and
PostScript printing leaves the expansion to the flattener, which runs on
the layers that print, and only checks for such pattern fills to warn.
The expansion counted the objects a pattern fill made only after making
them, so one shape could clone up to 250,000 tile positions times the
tile art's objects past the limit. Each fill now counts its tiles before
they are made, and after outlining strokes and effects for turned or
sheared tiles, and keeps room for the copy and group of the fills after
it. A fill that does not fit stays a pattern fill.
A pattern fill in a pattern's tile art that paints a see-through or
colorized image was not counted, so PDF 1.3 export kept it as a
pattern and failed on its transparency. Detection now follows pattern
fills in tile art down to the three levels the canvas draws, skipping
hidden tile art, and the tiles the expansion makes are expanded again
for them. Expansion stops once the expanded art holds MAX_GENERATED
objects.
Blends, envelopes, repeats and Intertwine groups that hold a see-through
or colorized pattern tile image are expanded into the art the writers
draw for them before the tiles are expanded, so those tiles are
flattened too. Random Transform effects in that art are baked first.
Hidden shapes, shapes in hidden groups or layers and template layers are
skipped: expanding a hidden shape made its tiles show in the file, and
art that is not written no longer makes a flattened copy of the document.
Flattening counted every colorized image as transparency, in the art and
in pattern tiles. A new flattener option, keeps_colorize, stops counting
an image colorized with a solid paint whose pixels are grayscale or 1-bit,
for a format whose writer draws such images in their ink. Opacity,
blending modes, opacity masks and effects still flatten them, and pattern
tiles are still expanded for those. The option is off, so exports flatten
as before; the EPS writer that draws colorized images turns it on.
The EPS pattern tile tests now check the exported colors, and a tile
group with opacity for the warning.
PDF 1.3, PDF/X-1a, PDF/X-3, EPS and PostScript printing flatten
transparency with `flatten_document`, which only looked at art in the
layers. An image with see-through pixels, a colorize paint, opacity or
a blending mode drawn only through a pattern fill stayed in the pattern
definition, so the flattener returned early and the writer drew the tile
opaque and uncolorized (PDF 1.3 export failed on the transparency left).
`flatten_document` now first expands pattern fills whose tile image
needs flattening into their tiles, as legacy .ai save does. See-through
tile pixels count only where the caller counts see-through images (PDF
1.3); EPS level 3 already masks them out. The EPS and PostScript print
transparency warnings now see those tile images too.
Homography::then_after returned products whose entries could overflow to
infinity or become NaN. A move, transform or grid reproject of type or a
symbol instance whose stored projection has large finite entries stored such
a product, and the type was then drawn flat, since a projection that is not
finite reads as none.
- Homography::checked_then_after returns None when an entry of the product
is not finite.
- project_node composes each type and symbol instance projection with it and
returns false, leaving the object as it is, when one would not be finite;
moves and transforms in perspective and Define Perspective Grid with
reproject then return the horizon error and leave the document unchanged.
- transform_map, attach_homography and size_homography return None for such
a product.
- Edit Text returns the horizon error, and does not enter isolation mode,
when the type cannot be shown flat where it is drawn.
effect.apply now reports the item of the first selected object, whose row
the active item is. With nothing selected, an explicit aligned item returns
the command's error instead of an internal error.
The Appearance panel's active row is a row of the first selected object's
stack, but fill, stroke, gradient and effect edits matched it against the
object that paints first. When the selection was made top object first and
the objects' stacks differ, an edit changed another row: with the red fill
of [red, white, Stroke] active above a [white, Stroke] object, Fill set the
white row instead.
These edits now match the active row against the first selected object (or
the compound path holding it), as Add New Fill and Reduce to Basic
Appearance already do. Gradient edits also read whether the active row is a
fill or a stroke from that object.
Found while testing crates/engine/src/cmd/variablecmds/csv.rs:146 (csv_escape) and :158-163 (cell_to_value)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
library_file_name kept CON, NUL, COM1 and the like, which Windows treats as
devices, not files. It now adds a - after such a name (CON-.json).
Part of #3602
Each patch of a gradient mesh was cut into 8 x 8 flat quads for SVG export,
Object > Expand and the other outputs that cannot shade a mesh, whatever its
colours, so a patch of one colour became 64 identical pieces. Neighbouring
quads are now joined into square blocks wherever the colour changes by no
more than about one 8-bit step across the block; the block's outline runs
through its quads' corners, and a patch that folds over itself is not joined.
The move drag remembers the plane it places loose art on. Pressing 4
during the drag, or dragging on after it, previews and commits the move
on that plane instead of dropping it. A 1-3 key pressed before the drag
threshold also sets the plane the move uses.
perspective.move takes constrain: true instead of a plane-space
direction. For each object, the command snaps the move to the nearest
axis or 45-degree diagonal of that object's own plane, so a selection on
several planes keeps every object on a line of its plane. The tool sends
the raw pointer with the flag.
On a diagonal, Snap to Grid now moves along the diagonal by the nearer
per-axis correction, so that edge lands on its gridline.
perspective.move takes an optional constrain: [dx, dy], a plane-space
direction. For an in-plane move, Snap to Grid's correction is projected
onto that direction, so a move the Shift key constrains to a plane axis
or a 45-degree diagonal stays on that line when an object edge lies near
a gridline. The Perspective Selection tool sends the direction for
Shift moves and copies. Moves without the param behave as before.
Holding Shift while dragging objects with the Perspective Selection tool
snaps the move, in the plane's own coordinates, to the nearest plane axis
or 45 degree diagonal. This applies to plain moves and to Alt and
Ctrl+Alt copies. The preview, the final move and the measurement label
use the snapped point. Pressing or releasing Shift, pressing 5 and
pressing 1 to 4 during the drag recompute the preview from the pointer;
a move perpendicular to the plane is not constrained.
The targets are in paint order, so the first selected object is not always the first target. The active row is now matched against the first selected object wherever it is among them.
Reduce to Basic Appearance kept the topmost visible fill and stroke even
when another fill or stroke row was selected in the Appearance panel.
It now keeps the selected row in place of the topmost one of its kind,
and in each other selected object the row equal to it. With ids, or
with no selected row, it keeps the topmost ones as before.
With a fill row selected in the Appearance panel, Add New Fill now
inserts a copy of that row directly above it and selects the new fill.
Rows already above the selected one stay where they are. Before, the
new fill was always a copy of the topmost fill, added at the top.
The selected row belongs to the first selected object. In a mixed
selection, an object that shares that row gets the copy above its own
equal row; an object that does not share it gets a copy of its top
fill on top, as before. With a stroke row selected, or with `ids` or
`target: "contents"`, Add New Fill works as before.
The panel drops rows that were Cmd- or Shift-clicked together when the
active row changes outside the panel, so after Add New Fill (button,
menu or shortcut) only the new fill is selected.
Blob Brush Tool Options gain Angle (-180 to 180 degrees, 0 by default)
and Roundness (0 to 100 percent, 100 by default), with a preview of the
tip and three dabs; a drag in the preview square sets the Angle. The
elliptical tip keeps its angle on the page along a stroke, a 0 percent
tip is drawn 0.1 percent as wide as it is long, and Size set to
Pressure still varies its size. path.blob takes angle and roundness,
and both values are kept with the tool's options.
While a non-round tip drags, the Blob Brush shows the outline of the
area it covers with its length label, and an Alt drag that smooths
shows the Smooth tool's thin line.
The art that replaces an outlined or expanded path did not take the
path's hidden, locked or Knockout Shape state. Outline Stroke on a
hidden path, or Expand on a group with a hidden member, made the new art
visible (a filled and stroked path became half visible: the outline
shown, the fill copy hidden), and a locked member's art was unlocked.
The replacement now takes the path's visibility, lock and Knockout Shape
state, and the fill copies and clipping paths inside it are shown and
unlocked, so showing or unlocking the new art shows or unlocks all of it.
This covers Outline Stroke, and Expand's strokes, gradient fills and
pattern fills.
Don Omondi