The Simplify dialog had Tolerance, Preview and the anchor point counts.
It now also has three of the options of the reference app's advanced
Simplify dialog:
- Corner Point Angle Threshold is a slider from 0° to 180° that opens
at 150°, with its label above it so the dialog stays under the
420-point width that menu_parameter_dialogs_are_compact allows. An
anchor whose corner is sharper than the threshold stays a corner, so
moving the slider right keeps more corners. The dialog sends
object.path.simplify's cornerAngle as 180° less the threshold, so the
opening value gives the same result as before.
- Convert to Straight Lines sends straightLines.
- While Preview is on, Show Original Path draws the paths as they were
before the preview, in a faint band of their layer's color under the
selection outlines.
The three labels have rows in the 19 catalogs that translate every
label.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
In a rotated view, seven parts of the canvas and the Navigator worked as
if the view were not turned. Fit Artboard in Window and Fit All in
Window sized the zoom from the unturned width and height, so at 45° a
612 x 792 pt artboard ran off a 1000 x 800 canvas. The Zoom tool's
marquee (Animated Zoom or GPU Performance off) set the zoom to 3.13% at
90° and 180°. Ruler guides on no artboard were drawn square to the
screen while the tools pick them, snap to them and move them by their
position in the document. The rectangle a tool drags out (the selection
marquee, and the drags of the Type tool, the Artboard tool, the Place
cursor and Rectangle Cut) was drawn as a box square to the screen while
the tools work in the document rectangle. Show Hidden Characters skipped
type whose turned outline reached into the canvas when the box between
two of its corners did not. At 180° the Contextual Task Bar covered the
selection, and the Navigator's red box outlined an area that the window
did not show.
Now fitting uses the size of the artboard or art turned with the view,
and the Zoom tool's marquee zooms by its size on screen and centers on
its middle. A canvas guide is drawn along its document line, cut to the
canvas. Rectangles that tools drag out are drawn through the screen
corners of the document rectangle the tools use. Show Hidden Characters
uses the type's turned outline on screen, and the task bar uses the
selection's. The Navigator draws the canvas's corners mapped into the
document. At 0° each of these does what it did before.
Docs: docs/target-app-parity.md.
A Blob Brush stroke merged with every touching closed path of its
color that had no stroke, and the blob it drew or merged into was
always left selected. The Blob Brush Tool Options had Size only.
The Blob Brush Tool Options now have Keep selected and Merge only
with selection, both off by default. A blob that a stroke draws or
merges into is no longer left selected unless Keep selected is on,
and the rest of the selection stays as it was. While Merge only with
selection is on, a stroke merges only with selected blobs, and with
nothing selected it draws a new blob. The options persist like the
tool's Size, and path.blob takes keepSelected and mergeOnlySelection,
both false by default. Keep selected stays on by default for the
Pencil and Paintbrush.
Docs: docs/target-app-parity.md, docs/control-protocol.md.
A right-click on the canvas now records the locked objects under the
pointer with vectorcraft_doc::hit::locked_objects_at, topmost first and
at most 20. A locked group is listed instead of the objects it holds.
Hidden objects and objects on hidden, locked or template layers are not
listed, and in isolation mode only the isolated group's contents are
listed. While the menu is open, it has an Unlock submenu after Undo
and Redo that lists each of them by the name the Layers panel shows.
Choosing a name runs layer.setProps {ids: [id], locked: false}, as the
Layers panel's lock column does, in one undo step. ui.contextMenu.list
shows the same items.
Docs: docs/control-protocol.md, docs/target-app-parity.md.
The Selection tool shows two pie widgets just outside a selected live
ellipse while the bounding box shows: one at the Pie Start Angle and
one at the Pie End Angle. Dragging one sets its angle to the angle of
the outline's point that lies in the direction of the pointer from the
ellipse's center, in one undo step, through `object.setLiveShape`'s
`pieStart` or `pieEnd`. Double-clicking one makes the ellipse whole
again (0° to 360°). Where the two widgets coincide, as on a whole
ellipse, a press takes the End widget.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
A Selection tool marquee selected every object it touched, a Group
Selection marquee selected the anchors inside it, and E pressed during
the drag did nothing. Now E switches either marquee to selecting only
the objects that lie entirely inside it, measured by their geometric
bounds, and E pressed again switches it back. Each marquee starts in
the default mode.
- The Selection tool selects a group only when the whole group lies
inside. Group Selection selects the objects inside groups, each as a
whole object. Shift still toggles. Direct Selection does not take E.
- The ruler guides the marquee selects with the art are limited the same
way: an artboard guide is selected when its whole length lies inside,
and a canvas guide is not selected.
- Tools receive letter keys as ToolKey::Letter. While a tool is busy, the
desktop app sends it each press of a letter it claims, without Cmd,
Ctrl or Alt and without key repeats, and headless press_key sends a
claimed letter the same way. With nothing dragged, press_key {key: "e"}
still chooses the tool bound to E.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group had no arrow widget for switching between Face Selection
and Construction mode.
With the Shaper or Selection tool active, a selected Shaper Group, or a
group with one of its faces selected, now shows an arrow beside the
middle of the right side of its source shapes' bounds. A click on it
isolates the source shapes (object.isolate). A second click leaves
isolation with the group selected (object.exitIsolation). The arrow
points right in Face Selection mode and left in Construction mode.
In Construction mode a Shaper click selects an original shape of the
isolated group. Before, it selected the whole group outside the
isolation, and shaper.select with source could pick an original of
another Shaper Group lying above it.
Docs: docs/shaper.md, docs/target-app-parity.md.
The reference app resets the horizontal scale of type to 100% with
Cmd/Ctrl+Shift+X. VectorCraft had no command for it, and the chord
cut the selection: egui reports it as a Cut with Shift held.
type.resetHorizontalScale (Reset Horizontal Scale, default
Cmd+Shift+X) sets the horizontal scale to 100% in the text the Type
tool has selected, or else in all the text of every selected type
object, in one undo step. The value is the one the Character panel
shows, so a type object stretched to twice its width keeps 50% stored.
The vertical scale does not change. At a caret the command leaves the
text as it is. Type objects given in ids are reset in full, as
type.resetTracking does.
Docs: docs/mcp.md, docs/target-app-parity.md.
No command held Cmd/Ctrl+Alt+Shift+. and Cmd/Ctrl+Alt+Shift+,, so the
chords reached Increase and Decrease Font Size (Cmd/Ctrl+Shift+. and ,)
and changed the size by one Size/Leading increment.
Two commands, type.size.increaseByFive and type.size.decreaseByFive,
now hold the chords. They step the font size of the selected type, or
of the text the Type tool has selected, by five times the Size/Leading
increment (Preferences › Type). Agents reach them with press_key too.
Their labels have rows in every complete catalog.
Docs: docs/mcp.md, docs/target-app-parity.md.
PDF export and .ai saves wrote every page in points. ISO 32000-1
(Annex C.2) gives 14,400 units as the longest page side, and a page
with a longer side got a media box past that limit. A PDF/A-2b file
with such a page failed veraPDF's page size rule (6.1.13).
Such a page now gets a UserUnit (PDF 1.6): its longer side divided by
14,400 and rounded up to the next thousandth, with the page's sizes
and coordinates in those units. A 20,000 × 10,000 pt artboard is
written as a 14,398.85 × 7,199.42 page with /UserUnit 1.389, and
VectorCraft's PDF import reads it back at 20,000 × 10,000 pt. Pages
up to 14,400 pt, PDF 1.3 to 1.5 files, PDF/X files and printing are
written as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
Fit to Artwork Bounds resized the active artboard to the bounds of all
the art in the document, wherever that art was. With art on two
artboards, fitting one of them stretched it over both.
artboard.fitToArt now takes `indices` and fits each artboard to the
art on it, in one undo step. An object counts for every artboard its
drawn bounds overlap, and the artboard is fitted to all of its bounds,
also where it reaches past the artboard's edge. Art flush with an edge
from outside does not count. An artboard with no art on it keeps its
size and place, and the command fails with "no artwork" when none of
its artboards has art. Object › Artboards and the Artboards panel menu
pass the selected artboards (the Artboard tool's, else the active one),
and a recorded action leaves them out. Fit to Selected Art still
resizes the active artboard.
Docs: docs/mcp.md, docs/target-app-parity.md.
In the Transform panel, the Properties panel's Transform section and
the Control bar, Ctrl+Enter (Cmd+Return on a Mac) in W or H left the
field active and applied nothing. Now it applies the value as Enter
does and sends `proportional: true` to `object.setBounds`, so the other
side scales by the same factor with the Constrain Width and Height
Proportions link off. With the Artboard tool, the Transform panel's W
and H keep the active artboard's proportions the same way. X, Y,
Rotate, Shear and the number fields of dialogs keep Ctrl/Cmd+Enter as
it was.
- widgets::size_field is a num_field that Ctrl/Cmd+Enter also commits.
- transform::proportional gives the `proportional` param of the W and
H fields: the link, or true after Ctrl/Cmd+Enter.
Docs: docs/target-app-parity.md.
A rotated object's bounding box stands at the object's angle. No
command turned the view to the angle of the selection: `view.rotate`
turns the view only to an angle passed to it.
View › Rotate View to Selection, between the Rotate View submenu and
Reset Rotate View, runs a new UI command, `view.rotateToSelection`. It
turns the view about the center of the canvas to the angle the
selected objects share, the angle `document.inspect` reports as
`selectionRotation`, so their bounding box is square to the window.
Objects turned to different angles share no angle, and the view turns
back to 0. The zoom and the view's center stay as they were. The
command returns `{angle}`. With nothing selected it returns "nothing
selected" and the menu item is disabled; without a document it
returns "no document".
Every catalog that translates the menus has a new "Rotate View to
Selection" row.
Docs: docs/mcp.md, docs/target-app-parity.md.
With a key object, the Align panel's six Distribute Objects buttons
ignored the Distribute Spacing value. They kept the outermost objects
in place, spaced the others evenly between them and could move the
key object.
object.distribute now takes spacing. While the selection has a key
object, the key object stays in place, with the compound path or
selected group that contains it, and the objects' left edges, centers
or right edges (top edges, centers or bottom edges) end up spacing
points apart, outward from the key object's, in their order on that
line. With 0, the field's default, every object ends on the key
object's line. Two objects are enough, and to and artboard are not
used. The panel sends the value with the Distribute Objects buttons
while there is a key object, as it does with the Distribute Spacing
buttons. Without a key object, or with anchor points selected,
object.distribute does not use spacing and works as before. A spacing
that is not a number is an error.
Docs: docs/mcp.md, docs/target-app-parity.md.
Escape never changed the view's rotation.
Now a second Escape less than a second after the first runs Reset
Rotate View (`view.rotateReset`) when the view is rotated and the
second press has nothing else to end: no Presentation Mode, pattern
editing, isolation mode or open tool flyout, no tool that is busy or
takes the key, no open menu, dialog, command palette or Edit Toolbar
drawer, no text field or input method that takes the key, no number
field being dragged and no drag of the ruler origin. The first Escape
may end something, such as isolation mode, but it does not count as the
first when a menu, a dialog, the command palette, the drawer, a field
or an input method takes it. After a click, a press of another key that
is not a modifier (Shift, Control, Alt/Option or Command) or a held
Escape's repeats, the next Escape counts as the first. With the Rotate
View tool chosen, one Escape resets the view.
Docs: docs/target-app-parity.md.
After Object › Path › Remove Anchor Points the anchor that follows each
removed one is selected: round the end of a closed subpath, or the one
before it at an open subpath's end. Running the command again goes on
along the path, without picking each anchor first. Several anchors,
subpaths and paths each get their own next anchor; a path that goes
leaves nothing selected; one undo step restores the anchors and the
selection.
The Delete key still selects the remainder whole so a second Delete
removes it, and the Delete Anchor Point tool still leaves the path
selected whole.
Fixes#2241
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tab set the panels, the toolbar and the Control bar to one value on
each press. Two presses turned on a Control bar that had been off.
When the toolbar was hidden with Window › Tools, Tab showed the toolbar
and the Control bar instead of hiding the panels.
Tab now records which of the three showed when it hides them, and the
next Tab shows those again. Panels shown with Shift+Tab in between
stay shown. While the panels are hidden and the toolbar or the
Control bar shows, as after Shift+Tab, Tab hides those bars instead of
showing all three. When the toolbar or the Control bar was shown another way
after Tab hid them, the next Tab hides what shows and records that
instead. A switch of workspace clears the record. When none of the
three shows and Tab hid none, Tab shows all three, as before. The
record is saved with the other UI settings, so the first Tab after a
restart shows the same bars.
Docs: docs/target-app-parity.md.
On macOS the canvas paints the tool cursor into the window and hides
the system pointer. winit hides the pointer with a cursor rect that
holds a transparent cursor, and AppKit applies cursor rects only in the
key window. Over a VectorCraft window behind another app, or under its
own File › Open… sheet, macOS showed its arrow next to the painted tool
cursor.
On macOS the canvas now paints the tool cursor only while the window
has the focus. Without the focus it sets the tool's system cursor icon,
and the system pointer shows alone. Windows, X11, Wayland and the web
are unchanged.
Part of #2020.
Docs: docs/target-app-parity.md.
In the Swatches panel, a swatch dragged onto another swatch moved next
to it whether or not Alt was held. With Alt held at the release, a
swatch dropped on a swatch of its kind now gives that swatch its color,
gradient or pattern in one undo step, and the swatch keeps its name and
place. Art linked to a global swatch takes the new color. Drags of
None, Registration or color groups, and drops on a tint swatch or on a
swatch of another kind, work as before.
A color dragged in from outside the panel, such as from a Fill/Stroke
proxy, and Alt-dropped on a tint swatch failed with an error that the
swatch is a tint. It now becomes a new swatch, as a drop on a swatch of
another kind does.
Docs: docs/control-protocol.md, docs/target-app-parity.md.
The raster matrix [a b c d tx ty] is an art-space matrix (y up) applied to
the pixels with their rows running downwards, (u, -v). The reader flipped
the matrix's result instead, which only agrees when b = c = 0, so a rotated
image came in turned 180 degrees around its corner. The legacy version 7
writer and its prolog used the same convention; they now write and draw
the matrix the reader takes.
dataset.select, dataset.next and dataset.prev rewrite bound type with
the data set's text but replied only {name, applied, skipped}. A long
value could push lines out of a fixed frame and the reply had no
overflow key, while text.setText answers overflow: [id] for the same
text.
The three commands now add overflow: [id...] with the area type and
type on a path whose text they rewrote and that doesn't fit, through
typecmd::with_overflow, as text.setText does. An object that two text
variables rewrite is named once. Type that the data set left alone is
not named, and the key is left out when all of the rewritten text
fits.
Docs: docs/mcp.md, docs/target-app-parity.md.
As in the reference app's Contextual Task Bar, which offers "options like
Image Trace, Retype, and Crop Image" for images and lets you "quickly
expand traced artwork from the bar" (public announcement:
https://community.adobe.com/announcements-651/contextual-task-bar-in-illustrator-2025-quick-actions-when-you-need-them-1546580):
- One image selected: Image Trace traces it at once with the Default
preset, leaving the Image Trace panel as it was (like the quick trace
from Properties and the Control bar); Crop Image shows the crop box.
Offset Path and Simplify, which don't apply to an image, are gone.
- One Image Trace object selected: Expand keeps only the traced paths,
in place of Ungroup and Isolate.
Retype isn't offered: the app doesn't have it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dataset.import trimmed every cell, quoted or not. dataset.export quotes
a text value with leading or trailing spaces, so a value such as
" padded " came back from its own export as "padded".
The CSV reader now trims an unquoted cell as before and keeps a quoted
cell as written between its quotes, spaces included. White space
between the closing quote and the next comma or line end is still
dropped. Image, graph and visibility cells, data set names and header
cells are trimmed as before.
A `.ai` opened from its editing data lost a text object on a layer that
shows and has Print off when its page drew no type for it. prune_unseen
weighs each text object made from the text document that the page's
type doesn't match against the page, and the layers are drawn for that
comparison as they print (as_printed), with such layers hidden. Taking
one of these objects out never changed the comparison, so each was
removed with the note "text objects that the file keeps but its page
doesn't draw ... are left out".
unmark now carries a print flag next to the shown flag, and a layer
with printable off clears it for everything it holds. Only made text
objects that show and print are weighed against the page; the others
stay on their layer.
Docs: docs/mcp.md, docs/target-app-parity.md.
The command catalogue is about 340,000 characters, more than many MCP
clients show, and `query` (the name agents reach for first) was refused as
an unknown argument. command_list and list_commands now take `query` as
another name for `filter`, `menu` to keep the commands under a menu path
("Object > Path"), and `brief` to leave out each command's params text,
which is most of the catalogue; the params of one command are a filtered
listing away.
Found while testing crates/engine/src/cmd/typemenu.rs:668 (find_replace / edit_runs)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The family list scrolled with egui's floating scroll bar, which is drawn
over the rows' right ends, where each family's star is: with the pointer
there the bar widened over the star and a click went to the bar. The list
now takes the scroll bar the menus got for the same reason (#2086), slim
and in a column of its own; `widgets::list_scroll_style` holds it for both.
- "Font Style:" in Dimension Tool Options is Teckensnittsstil: Teckenstil
is already Character Style.
- The drawing-scale help reads "1:10 visar 1 enhet på sidan som 10".
- The layered-file fallback message and "Check an artboard to save" read
more naturally.
- "File › Place…" names the menu as the menus do (Fil, not Arkiv).
- The rows are reviewed, so the "machine-drafted; review welcome" note
above them goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A second colour scheme next to Modern: the neutral greys and blue accent of
earlier versions, on the same cards, corners and layout. Picked in
Preferences › User Interface › Color Scheme (pref uiColorScheme:
modern|classic); Accent Color is dimmed while Classic is chosen, which has
its own blue.
Layers ≡ and row menus collect art via assets.add; a layer id expands to the art under it (including sublayers) so MCP and the panel match Object › Collect for Export.
The list showed [None], [Registration] and the default swatches' names in
English. Names the app gives (the default swatches and colour groups) now
show in the UI's language where it has a `swatch` row for them; documents
keep the names as they are, and a name the user gave shows as written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An ideographic space in a face without U+3000 was shaped with that face
and could set at zero width, removing an indent. Only what the layout
handles itself (tab, line and paragraph breaks) stays with the primary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A corner whose anchor carries a handle (where a curve meets a line, or two
curves meet) was left sharp. It now gets Live Corners' round cut
(geom::corners, #1144), reaching `radius` along each side and trimming a
curved side. Corners between handle-less anchors are rounded exactly as
before, and a closed path still starts where its first corner's rounding
starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Symbol instances are placed through a transform as images are, so the
Transform effect now moves and copies both (transform_placed), sharing one
copy budget (MAX_COPY_OBJECTS). Copies of either stop before one reaches
past MAX_REACH, as a path's do (distort::within_reach).
Adds end-to-end export tests for a group's image copies in svg and pdf.
While the renderer drew a brushed path on its fast path, it drew the
pieces of brush art with that path still set as the object being
drawn. cached_stroke and fill_path_gradient then kept the outlines and
gradient slices of the pieces' strokes under the brushed path and the
address of each piece's stroke. The entries held the brushed path and
not the pieces, so a piece made later could take the address of an
earlier piece's stroke and be drawn with that piece's outline. The
instances of a symbol and the copies of a live repeat replace each
other's brush art, so it is made again for each of them in every
frame, and every brushed path gets new brush art when the document's
brushes change. In a test, a renderer drawing three instances of a
symbol whose art holds a path brushed with a scatter brush of a
stroked square drew frames that differed from a new renderer's in 316
to 1,140 pixels.
The two caches now keep only the strokes of the object being drawn. With
vectorcraft-cli bench at 2880x1800 on 8 threads, 2,000 instances of a
symbol of eight brushed paths took 203.4 ms a frame on main and 155.9 ms
with this change. 2,000 groups of the same paths, for which main keeps
the brush art and the outlines of its strokes between frames, took 133.7
ms on main and 156.9 ms with this change. The peak working set of a
bench run at 2880x1800 went from 609 MiB to 127 MiB on the instances and
from 331 MiB to 210 MiB on the groups.
Commands that read the selection through edit::selected_roots leave
out an object whose group is also selected (edit::roots_of). Fourteen
places that read `ids` kept an object listed together with its group.
Given ids that list an object and a group that holds it, Make Repeat
failed with "no such object", New Symbol failed or stored the object
twice in the symbol, and object.transform moved it twice (20 pt for a
10 pt move).
These places now pass explicit ids through edit::outermost, which
drops an id whose ancestor is also listed, with the filter that
roots_of runs on the selection (now edit::without_inner). Nothing else
is dropped or replaced: unlike roots_of, it keeps layers and
compound-path members. A list without nesting gives the same result as
before. Commands that take both ids and the selection as listed, such
as paint.setFill without item, are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
Effect › Distort › Glass… offered only its four built-in textures. The
reference app's Texture menu also has Load Texture, which takes an
image file as the glass surface.
The Glass dialog now has a Load Texture… button. It reads a PNG, JPEG,
GIF, WebP, TIFF, BMP, PSD or PSB file within the pixel allowance the
renderer draws images in, and the Texture menu gains Loaded Texture.
The effect stores the image's gray levels in `textureImage` as a
grayscale PNG in base64, so the document saves the texture with the
effect, and copies of the effect carry it. effect.apply and
effect.setParams take `textureImage` as {path}, {name, dataBase64} or
the stored string; any other value is an error.
The texture lies one image pixel per point at Scaling 100%, centered on
the object and repeated. Each pixel's luma is the surface's height,
from 0 for black to 1 pt for white, and a transparent pixel counts as
middle gray. A Glass without `textureImage` draws and saves as before.
Docs: docs/mcp.md (Glass textures), docs/effects-parity.md,
docs/gaps.md, docs/target-app-parity.md.
dotCooCoo