Review follow-up (CodeRabbit): a gradient drawn as pixels was sized from its
area in the space it is drawn in, so type scaled 4 times got a quarter of the
raster effects resolution; the image is now sized from the area on the page,
within the same pixel caps. And type whose fill is drawn as art (a dithered
or freeform gradient's image, a pattern) went out as outlines only; its
characters are now also written as invisible text (rendering mode 3), as
unpainted type already is, so they can be selected and searched.
PDF import gives a space read from a gap between two glyphs tracking of
its own when the line's tracking cannot place the glyphs after it. A
space glyph that the file draws was not measured this way: the gap
before or after it was spread over the whole line as one tracking
value, so the words after it moved. VectorCraft's own PDF export draws
a tracked space and leaves its tracking after it.
A space the file draws between two glyphs on a line is now measured
from the end of the glyph before it to the start of the glyph after it,
and takes tracking of its own on the same terms as a space read from a
gap. Two or more spaces in a row, and a space at the start or end of a
line, keep the line's tracking. The tracking calculation builds a map
of the line's laid-out advances by byte offset once.
A wrapped line whose spaces each have tracking of their own, within a
fiftieth of an em of the first space's tracking, can still come back as
part of justified area type. Wrapped lines whose spaces' trackings
differ by more than that stay point type with their words in place.
Text drawn in rendering mode 3 (3 Tr), which is how a scanned page carries
its recognized OCR text, was left out on open (since #2988, with a warning),
so a scanned PDF opened and saved again lost its searchable text.
Import: an invisible glyph now comes in as type with neither fill nor
stroke. It skips the glyph-outline checks that guard how visible type looks,
and it joins only other invisible text on a line (Look::takes no longer
lets it into a stroke-only run). INVISIBLE_TEXT_NOTE now only reports text
that can't be type (text opened as outlines, Type 3 fonts), and
tests_reader_compat::invisible_text_is_reported_when_left_out expects the
invisible line as unpainted type when text opens as type.
Export and print: characters with no fill and no stroke are written as real
text inside a form marked Mark::Invisible; forms::finish sets that form's
text rendering mode to 3, so it draws nothing but stays selectable and
searchable (PDF/X-1a and PDF/A-2b too). The writer has no invisible mode of
its own, so this reuses the marked-form mechanism used for layers and
overprint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft listed a variable font's named instances as styles, but
type could not be set between or past them. The reference app's
Character panel has a Variable Font control that adjusts a variable
font's axes, such as Weight, Width and Slant.
Type now keeps Variable Font settings by axis tag
(CharStyle::font_axes, saved as fontAxes only when set). text.setFormat
and text.setRangeStyle take fontAxes: each value is clamped to its
axis's range, a tag the font has no axis for is left out, and null
goes back to the style's own setting. Another font or style clears
them, including one from a character style that does not set them. A
character style captured from type sets them, with {} for none.
text.fontList {family, style} lists a font's axes.
Layout, outlines, the substituted-glyph highlight and PDF export use
the font instanced at the settings, and neighboring runs at different
settings are shaped apart, as runs in different fonts are. SVG export
writes them as font-variation-settings, the wght setting as the weight
and the wdth setting as font-stretch, and embeds the font instanced
there; SVG import reads font-variation-settings back. Legacy .ai export
warns that the settings are left out.
The Character panel shows a Variable Font button for a variable font.
It opens a slider and a field for each axis the font does not hide,
labeled with the font's name for the axis, and screen readers get each
slider under that name. A drag is one undo step. Reset Panel leaves
the settings, as it leaves the font and style.
Missing Glyph Protection now keeps the settings and the font version
on the characters that keep their font; before, it kept only the
family and style. A character style applied or redefined with another
font now clears the old font's version, as text.setStyle does, unless
the style sets one. SVG export with embedded fonts warns when faces of
one weight, style and width share characters, which browsers then draw
in one of the faces.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Effect › Path had Offset Path and Outline Stroke but not Outline Object.
The new effect (path.outlineObject) has no options: the Effect menu
applies it at once, and effect.apply refuses any parameter. It is a
geometry effect that returns its input. Type already reaches geometry
effects as its glyph outlines, so type that carries it is drawn,
exported (PDF and SVG as paths, with no font) and expanded as those
outlines, stays editable type, and the effects after it reshape the
outlines. Paths, compound paths and images draw as before, and no
bounds change: with Use Preview Bounds on, type is still measured by
its layout box.
Every complete catalog gets a row for the label.
Docs: docs/effects-parity.md, docs/target-app-parity.md (an evidence
line), docs/mcp.md (the effect, and what Expand Appearance does to
type).
Exports bake live effects into plain art, and a Transform effect on
type or on its group or layer turned the type into glyph outlines, even
when the effect only moved it or made moved copies. A PDF reader could
not select or search that text.
The export bake now keeps such type as type, moved into each place the
effect puts its outlines. It does this for Transform effects without
scale, rotation, reflection or Random, for type whose characters are in
solid colors without underline or strikethrough, and that has no fills
or strokes of its own, inline graphics or perspective, and when the
copies do not overlap. Type under such an effect on its group or layer
also needs no transparency or effects of its own, and the group or
layer needs no fill, stroke or Pathfinder effect of its own. The export
still outlines other type under geometry effects, and the canvas and
Expand Appearance still draw outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
Straight type takes the tracking that keeps its length as the file set
it; type on a path took none, so letter-spaced type on a curve came back
closed up to the font's advances (an "OFFICIAL ISSUED" badge sat to one
side of its band, a condensed title ran off the end of its path). Type on
a path now takes the same tracking, its length measured along the path
from the first glyph to the end of the last.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In builds with overflow checks (`cargo run`, `cargo test` and
`cargo xtask ci`), PDF export aborted the process when a number it
wrote rounded to -2,147,483,648 as an f32. pdf-writer 0.15 writes
-2,147,483,648.0 as an integer, and `Limits::register_int` overflows
when it takes the absolute value. krilla 0.8.2's `Surface` then fails
an assertion in its `Drop` while that panic unwinds.
`svg_hostile_markup_never_panics` in `import_fuzz` hit it with type
shifted 2,147,483,649 pt down. Paths, gradients, dash offsets, images
and artboards that far out hit it too, and so does a group around a
stroke wide enough to reach that far. Release builds have no overflow
checks.
PDF export now leaves out art whose coordinates or transform entries
lie beyond 1,000,000,000 in its own space or in the content stream it
is drawn into, and glyph lines whose spacing lies beyond 1,000,000,000
thousandths of an em. That covers paths and clipping paths, glyph
lines, images, gradients, strokes whose width, caps or miter spikes
reach that far, and the art and marks of a page whose artboard lies
that far, which is written blank. A dash offset beyond the bound is
written as its remainder after whole periods of the pattern.
The type's transform is now pushed inside the form that marks a fill
or stroke of type to overprint. The exporter checks what that form
holds through the type's transform, as it checks the same fill or
stroke without overprint.
Character tightening and optical kerning space each glyph differently, as
Japanese titles often are. The importer evened a line out with one
tracking value (type on a path took none), leaving glyphs up to an eighth
of an em out of place. When the file's font is installed and one value
can't place every glyph, each character now keeps its own tracking,
measured along the baseline (along the path for type on a path).
Glyphs closed up by up to half an em (the proportional widths of CJK
punctuation) also continue their line instead of starting another.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In a PDF (or the PDF part of an .ai file), a glyph of a subset font that
no ToUnicode map, CID table or character map of the font program names
was drawn as outlines, so one text object came in split: "RADA" as the
type "ADA" plus the R's outline.
Such a glyph is now looked for in the installed face of the font's name:
the first character (of those single-byte fonts encode: ASCII, Latin-1,
Latin Extended-A, punctuation, the euro and trade mark signs, fi and fl)
whose glyph draws the same outline, point for point within 2/1000 em,
names it. A subset carries the font's own outlines, so an installed copy
of the same font finds every glyph. Other versions of the font, empty
glyphs and glyphs that are no character still keep their outlines, with
the warning as before. Results are cached per glyph.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A font library can hold two versions of one family and style (a new
Montserrat-Bold.ttf beside an old montserrat.ttf). The font database kept
only the first one loaded, so type set in the other couldn't be matched
when a PDF or .ai was opened: it came in as outlines. Now every version
loads (the first stays the one family and style resolve to), PDF import
tries the other versions when the glyphs differ, and type set in a version
the family and style alone wouldn't pick names it in CharStyle::font_version
(left out when None, so documents without it are unchanged). Layout,
shaping, the substituted-glyph highlight, Find Font, Package and Document
Info follow it; changing the font clears it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A text matrix that shears the glyphs (type turned and slanted as a whole)
came in as point type turned by the baseline's angle only: the glyphs stood
square on the baseline, so the type drew somewhere else (60 pt type leaning
by 0.25 came back about 10 pt off its outlines). The placement now keeps the
slant (the em's lean along the baseline per unit of its height, the height
measured across the baseline), lines only join glyphs with the same slant,
and the type object's transform shears by it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A PDF or PDF-compatible .ai whose ToUnicode map gives some glyphs U+FFFD (as
some files do for the digits of an embedded CID font) imported those glyphs as
type showing the replacement character, so every digit came in as "�".
U+FFFD now counts as no mapping. Such a glyph takes its character from the
embedded font where it can (Adobe's CID tables for CID-keyed CFF, as before,
then the font program's own cmap), and otherwise keeps its outline from the
embedded font, so it looks as the file draws it. The import warns which font
had characters the file doesn't name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
Type on a path could only be repositioned by Type on a Path Options, whose menu item sent
`{start: 0}`, so OK threw the text to the start of its path; nothing showed or dragged its
brackets. Now, as in Illustrator:
- Type on a path flows between a start and an end bracket (`TextKind::OnPath { end }`, None:
the end of the path or once round a closed one; `TextKind::path_span`). Flipping
(`TextObject::flip_on_path`) reverses the path keeping a closed path's first anchor and swaps
the brackets, so the type keeps its stretch of the path.
- Type on a Path Options gains Align to Path (ascender, descender, center, baseline) and
Spacing (glyphs spaced as if set that far above the path: closed up round the outside of
curves, opened up round the inside), laid out by the text engine.
- `type.pathOptions {start?, end?, flip?, effect?, alignToPath?, spacing?, ids?}` sets them in
one undo step; with none of them it queries. The menu item opens the dialog with the selected
type's Effect, Flip, Align to Path and Spacing (dropdowns for the choices) and leaves the
brackets alone, so OK as opened changes nothing.
- The Selection and Direct Selection tools show selected type on a path's path and its start,
centre and end brackets (`tools::pathtype`, with a bracket cursor): dragging the start or end
bracket sets where the type runs, dragging the centre bracket slides it along the path and,
across the path, flips it (Cmd/Ctrl held: it only slides). Each drag is one undo step.
- Arc-length measuring moved to `vectorcraft_geom::ArcPath` (layout, the tools and
`text.createInPath` share it). SVG export outlines path type whose end bracket, alignment or
spacing `<textPath>` can't express.
- docs/mcp.md documents the command and the drags; ROADMAP updated; dialog strings translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese PDFs and PDF-compatible .ai files often set text in CID fonts
with no ToUnicode map, in vertical columns, and in fonts the reader
doesn't have. They came in as outlines (or as the wrong characters).
- CID fonts without ToUnicode: the character comes from the font's CFF
charset through the standard CMaps (hayro's `embed-cmaps`); Kangxi
radicals that some generators map to are unified with their ideographs
(⿓ → 龍).
- A glyph becomes live type only when the installed font draws the same
glyph: compared by box with the font of the PDF's PostScript name, or
the closest style of its family (a variable font's named instances),
whose style the type then takes. Otherwise it keeps its outline.
- Vertical columns (WMode 1, glyphs with no horizontal advance) come back
as vertical type, letter spacing as tracking; a single upright glyph is
vertical type too. Horizontal lines get tracking from the glyph
positions the same way.
- Text in a font that isn't installed keeps its outlines (what prints),
with an editable copy in a substitute font, drawn pink, on a
non-printing layer named after the missing fonts (stroke-only glyphs
included).
- Marked content other than a layer's (spans with actual text,
artifacts) no longer ends a line of type: 篳篥・龍笛・笙 came back as
three objects when one character was in a span.
- Tests in tests_live_text.rs and tests_realtext.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The font database made one style per font file, so a variable font
such as Figtree[wght].ttf listed only its default instance (Light).
Faces now also yield their fvar named instances, each a style of the
family named by its subfamily name (the default instance is the face
itself; unnamed or duplicate instances are left out; axes and
instances read are capped). The system font scan reads the fvar table
beside the name table, so installed instances are listed before the
file is loaded and found by name and by PostScript name.
An instance face carries its axis settings: skrifa draws its outlines
and reads its metrics and advances at that location, harfrust shapes
with a ShaperInstance, so layout, the canvas, Create Outlines and hit
testing all use the instance. PDF export embeds it through krilla's
Font::new_variable, SVG @font-face through subsetter's
subset_with_variations: both write a static font of that instance.
Tests build a small variable font in code (test_fonts, via
write-fonts; no font file is committed) and check listing, resolving,
glyphs and advances, PDF and SVG export and damaged fvar/gvar tables;
Bahnschrift and Segoe UI Variable are checked where installed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Convert Text to Outlines off (advanced.outlineText: false), type is
written as selectable, searchable text: each glyph in its font, embedded
as a subset with a ToUnicode map, where its outline would be (rotated,
scaled, skewed and on-path type too; gradients keep their place). Fonts
whose licence forbids embedding, or allows only whole fonts, fall back to
outlines with a warning; a subset threshold below 100% is accepted with a
warning. Laid-out glyphs now carry their glyph id and transform.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Taha-Mahmoodi