Smooth Zig Zag ran the ridge points through a Catmull-Rom spline. Its end tangents slant across the path, and where the ridges are taller than about twice their spacing the sharp-turn floor of turn_tangent lengthens the handles, so the result read as straight diagonals with rounded tips. Each peak and valley is now a smooth point whose handles run along the path, a third of the way to the neighbouring ridge, so every span follows a half cosine through the path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A path with a Transform effect that makes copies and a gradient was still merged into one path by bake_leaf and expand_leaf, so the gradient spanned every copy. Route it through reshape / expand_outlined like the renderer does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect › Path had Offset Path and Outline Stroke but not Outline Object.
The new effect (path.outlineObject) has no options: the Effect menu
applies it at once, and effect.apply refuses any parameter. It is a
geometry effect that returns its input. Type already reaches geometry
effects as its glyph outlines, so type that carries it is drawn,
exported (PDF and SVG as paths, with no font) and expanded as those
outlines, stays editable type, and the effects after it reshape the
outlines. Paths, compound paths and images draw as before, and no
bounds change: with Use Preview Bounds on, type is still measured by
its layout box.
Every complete catalog gets a row for the label.
Docs: docs/effects-parity.md, docs/target-app-parity.md (an evidence
line), docs/mcp.md (the effect, and what Expand Appearance does to
type).
A geometry effect applied to one of a type object's own fills or
strokes (effect.apply with item) was kept but not drawn or exported
unless the type also had a geometry effect or perspective of its own.
With a geometry effect, the renderer measured the type for culling
without the fill's or stroke's effects, so an outline that reached past
the glyphs was not drawn once the glyphs left the view.
Type whose own fills or strokes have a visible geometry effect is now
drawn, culled and exported through its outlines, the same way as type
with an object-level geometry effect. Each effect reshapes the whole
outline that its fill or stroke paints. SVG, PDF, EPS and the other
vector exports write such type as paths. Type that holds inline
graphics stays type, as before.
A corner whose anchor carries a handle (where a curve meets a line, or two
curves meet) was left sharp. It now gets Live Corners' round cut
(geom::corners, #1144), reaching `radius` along each side and trimming a
curved side. Corners between handle-less anchors are rounded exactly as
before, and a closed path still starts where its first corner's rounding
starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Symbol instances are placed through a transform as images are, so the
Transform effect now moves and copies both (transform_placed), sharing one
copy budget (MAX_COPY_OBJECTS). Copies of either stop before one reaches
past MAX_REACH, as a path's do (distort::within_reach).
Adds end-to-end export tests for a group's image copies in svg and pdf.
Effect › Distort › Glass… offered only its four built-in textures. The
reference app's Texture menu also has Load Texture, which takes an
image file as the glass surface.
The Glass dialog now has a Load Texture… button. It reads a PNG, JPEG,
GIF, WebP, TIFF, BMP, PSD or PSB file within the pixel allowance the
renderer draws images in, and the Texture menu gains Loaded Texture.
The effect stores the image's gray levels in `textureImage` as a
grayscale PNG in base64, so the document saves the texture with the
effect, and copies of the effect carry it. effect.apply and
effect.setParams take `textureImage` as {path}, {name, dataBase64} or
the stored string; any other value is an error.
The texture lies one image pixel per point at Scaling 100%, centered on
the object and repeated. Each pixel's luma is the surface's height,
from 0 for black to 1 pt for white, and a transparent pixel counts as
middle gray. A Glass without `textureImage` draws and saves as before.
Docs: docs/mcp.md (Glass textures), docs/effects-parity.md,
docs/gaps.md, docs/target-app-parity.md.
Exports bake live effects into plain art, and a Transform effect on
type or on its group or layer turned the type into glyph outlines, even
when the effect only moved it or made moved copies. A PDF reader could
not select or search that text.
The export bake now keeps such type as type, moved into each place the
effect puts its outlines. It does this for Transform effects without
scale, rotation, reflection or Random, for type whose characters are in
solid colors without underline or strikethrough, and that has no fills
or strokes of its own, inline graphics or perspective, and when the
copies do not overlap. Type under such an effect on its group or layer
also needs no transparency or effects of its own, and the group or
layer needs no fill, stroke or Pathfinder effect of its own. The export
still outlines other type under geometry effects, and the canvas and
Expand Appearance still draw outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's Scribble Options have a Variation for each of Path
Overlap, Curviness and Spacing. Scribble had one `variation`, which
moved each line's ends both along the line and across it, and every
turn of a scribble took the same curviness. An angle such as 270 was
stored as given.
Scribble now takes `overlapVariation` (pt, default 0.5), which moves
the ends along the line, `spacingVariation` (pt, 0.5), which moves
them across it, and `curvinessVariation` (%, 0), which varies the
curviness from one turn to the next. The dialog shows each Variation
after the option it varies, and the Appearance panel lists all three.
A Scribble saved or scripted with the earlier `variation` reads it as
the Path Overlap and Spacing variations. With the defaults, and with
the earlier `variation`, Scribble draws the same outline as before.
`effect.apply` and `effect.setParams` store an angle above -180 and up
to 180, so 270 is stored as -90, and the dialog shows the stored value.
The Appearance panel's inline editor lists an effect's values in
their current form, as the dialog does. It listed an earlier key next
to the defaults of the keys that replace it.
Docs: docs/effects-parity.md (Stylize row), docs/target-app-parity.md.
Effect › Blur › Smart Blur had only its Normal mode: the dialog and
blur.smart took Radius, Threshold and Quality and drew the blur.
Smart Blur now takes a `blurMode` param ("normal", "edgeOnly" or
"overlayEdge"; "normal" by default), which its dialog shows as a Mode
menu. Edge Only draws the edges in white on black, and Overlay Edge
draws them in white over the Normal blur. A pixel is on an edge when
one of its four nearest pixels differs from it by more than the
threshold in a channel and its channels, alpha included, add up to at
least that pixel's. The white and the black keep each pixel's
coverage. Normal draws the same pixels as before, and an effect saved
without `blurMode` draws as Normal.
Docs: docs/effects-parity.md, docs/gaps.md, docs/target-app-parity.md.
Effect › Pathfinder left type in the group out of all ten operations,
on the canvas, in Expand Appearance and in exports. The text outliner
returns type as a group with one path per run. `leaves` in
crates/effects/src/group.rs took that group as one leaf, and
`geometry` gives no path for a group. A 100 x 100 pt square grouped
with a 100 pt "H" inside it kept all of its 10,000 pt² after Subtract
and Expand Appearance. In the shape modes a member group with type in
front also lost its paint, because it took the style of the outline
group, which has none.
`leaves` now takes the paths and compound paths of the outline art at
every depth, as it does for a member group, and gives each one the
type's opacity and blend mode. The same square keeps 8,684.88 pt² after
Subtract and Expand Appearance, its 10,000 pt² less the glyph's
1,315.12 pt².
Docs: docs/target-app-parity.md.
The renderer kept the shapes it drew for plug-in effects while the
object stayed the same. When a plug-in was installed for the first
time, installed again or removed, a renderer that had drawn the object
went on drawing the shapes from before the change.
When the plug-in registry's revision changes, the renderer now drops
the effect geometry and the effect art of objects with a plug-in
effect, and the cull bounds of every object that is or holds a symbol
instance or an object with a plug-in effect. Each thread then drops the
pattern tiles whose art has a plug-in effect or shows symbols or
patterns. The renderer adds the revision to the inputs of a raster
when its content has a plug-in effect, or shows symbols or patterns
while the document's symbol or pattern art has one, and to the key of
a live object's evaluation when the object, or an object it shows, has
a plug-in effect.
With other builds running, a temporary release test timed that key for
the 400 live objects in each of three documents at 11 to 609
microseconds a frame, against 9 to 433 before.
Docs: docs/target-app-parity.md, docs/gaps.md.
Type is drawn as its glyph outlines under a geometry effect, in EMF and
WMF export, in DXF export when it is written as outlines, through
Flatten Transparency with Convert All Text to Outlines, and inside an
envelope. Those outlines differed from the type the canvas draws in
four ways. They had no underline or strikethrough bars. A character
stroke on scaled type kept its unscaled weight. An unplaced gradient was
fitted to the glyphs it painted instead of the layout box. A run's
pattern tiles stayed in document space instead of scaling and turning
with the type. A group's or layer's own fills and strokes also painted
the glyphs of the type in it without the bars.
The outlines now include each run's underline and strikethrough bars,
as the canvas has drawn them since #850. Each run's path is made in
text space with its unplaced gradients fixed to the layout box, then
placed by the type's transform, which also scales its stroke weight
and dashes and transforms its pattern tiles. The type's own fills and
strokes have their unplaced gradients fixed to the bounding box of the
layout box in the document, where the canvas fits them.
Geometry effects that move or scale the outlines move and scale the
type's gradients with them: the type's own effects, also inside an
envelope and after Flatten Transparency has converted the type to
outlines, and the effects of a group, symbol instance or envelope that
holds the type. outline_text marks its group with a new node field,
type_outlines, which is saved with the document. reshape_leaves maps
the placed gradients in each marked group through the map that takes
the group's bounds before the effects onto its bounds after them. A
scale out of proportion stretches a radial gradient into an ellipse
and turns the isolines of a diagonal linear gradient, as it does on
type scaled by its own transform. Placed gradients outside those
groups stay where they are.
The reference app's Drop Shadow has a Color and a Darkness, the
percentage of black added to the object's own colors. Drop Shadow had
only a Color, so every shadow was one color. Choosing one or the other,
and the defaults, are VectorCraft's own.
Drop Shadow now takes `shade` ("color" or "darkness", default "color")
and `darkness` (%, default 100). Its dialog and the Appearance panel's
inline editor show Color and Darkness as radio buttons. With Darkness
d, a CMYK document keeps the object's cyan, magenta and yellow and
raises its black from K to K + d × (1 − K), and an RGB document
multiplies each channel by 1 − d, so in RGB 0% gives the object's
color and 100% gives black. A shadow saved without these keys draws as
before. SVG export writes a Darkness shadow with feComponentTransfer
and SVG import reads it back; CSS export leaves it out.
Docs: docs/target-app-parity.md.
Geometry effects on a group or layer, and effects on a symbol instance,
blend or repeat, outline the type inside it. outline_nested_text
replaced each type object with a plain group of its outlines, so the
type lost its opacity, blend mode, opacity mask, knockout shape
option, own effects and perspective, and hidden type was drawn,
exported and made visible by Expand Appearance.
outline_nested_text now replaces type with the art that as_art makes
for it, which is also what reshape makes for type with geometry
effects of its own. That art has the type's own geometry effects and
perspective applied and keeps its name, transparency, opacity mask
and other effects. as_art also keeps the object's visibility and
knockout shape option, so hidden type with a geometry effect of its
own is left out of exports. Type in a clip group's clipping path still
becomes its plain outlines and now keeps its visibility.
Use automatic vector smooth shading without a separate control.
Enable Cap by default and keep continuous rim curves and bounded seam joins.
Integrate the shared dialog with the other three 3D effects.
Extrude & Bevel, Inflate and Rotate built their solid from the outline by
nesting alone: a contour inside an odd number of others was a hole. Under the
nonzero rule a contour inside another that runs the same way encloses filled
art, so the effect cut a hole the object doesn't have. The fill rule now
reaches the outline builder, which leaves out contours with filled art on
both sides before pairing outlines and holes.
Each Transform effect clamps its own copies to 1000, but each copies all of
what the effect before it made: three of them on one square ask for a
thousand million squares, from a small file. Copies now stop where the result
would pass two million anchors (1000 copies of a 2000-anchor path).
The public 3D and Materials panel options give the Light Settings as
Intensity (0–100 %), Rotation (-180° to 180°), Height (0° to 90°),
Softness (0–100 %) and Ambient Light (0–200 %), with the light moved to
the back or the front of the object. The 3D effects (Revolve included)
had Direction and Elevation (an azimuth and elevation), Intensity and
Ambient (0–100 %).
- Rotation turns the light round the object on the page (our reading:
0° on its right, counterclockwise); Height raises it from beside the
object (0°) to straight in front (90°); Light behind the object puts
it at the back. The light gizmo's ring and line are Rotation and
Height.
- Softness wraps the light round the object: at 0 % it falls off with
the angle as before, at 100 % it reaches nothing only straight away.
- Ambient Light runs to 200 %; faces stay no brighter than the art.
- lightRotation, lightHeight, lightBehind and lightSoftness replace
lightAzimuth and lightElevation. An earlier light is read as the same
direction, so it shades exactly as before (old and new code give the
same colours for the four effects and five lights); effect.setParams
turns a stored one into the new form before applying new values, and
the parameter description names lightAzimuth and lightElevation as the
earlier form, so effect.apply and effect.setParams still take them. The
default light is the earlier default's: Rotation 125.26°, Height 30°.
- The dialog's Lighting tab shows the settings in the documented order;
Softness, Ambient Light and Light behind the object are in every
catalog, and the unused Direction, Elevation and Ambient are gone.
Light colour, presets, several lights and shadows are not built.
The public 3D and Materials panel options give Perspective as 0° to 160°
("how close or far the object appears"); it was a 0–100 % strength, for
Revolve, Extrude & Bevel, Inflate and Rotate alike.
- The eye stands where a sphere about the object's centre, √3 times its
half size (the box around it fits inside), fills that angle of the
view: 0° is none, wider brings the eye nearer, and at 160° it is just
outside the sphere, never inside the object. The documentation doesn't
say how the angle places the eye; docs/three-d.md says this is our
reading.
- `perspectiveAngle` (degrees) replaces `perspective` (%). A strength from
an earlier file or script is read as the angle that shows exactly the
same view: sin(angle / 2) = √3 × strength / 4, 100 % about 51.3°. An
angle given too wins. effect.setParams turns a stored strength into the
angle before applying new values. The parameter description names
`perspective` as the earlier form, so effect.apply and effect.setParams
still take it under the key check of #1592. Old and new code draw the four effects identically at 0, 25,
60 and 100 % (bounds equal to 1e-9).
- The dialogs' Perspective fields run 0–160°.
# Conflicts:
# docs/target-app-parity.md
The rows' spans were all chained into one polyline, so where a row had
more than one span the line ran across the hole between them, outside
the shape. A span now continues the previous row's chain whose
connecting line stays inside the shape (the nearest one); otherwise it
starts a chain of its own. In a convex shape the connector always stays
inside, so the result there is unchanged (render goldens pass).
Fixes#1648
Roughen's jitter can put a point behind its predecessor, so the path
turns back. The Catmull-Rom tangent next - prev then shrinks to almost
nothing and the anchor becomes a cusp, which PDF viewers (MuPDF,
poppler, Ghostscript) draw with a miter spike; the preview doesn't.
catmull_rom now keeps the tangent at least half as long as the longer
chord, and where it is shorter (turns of more than about 150 degrees)
points it along the bisector of the two chords: the turn becomes a round
hairpin. Gentler turns keep the plain Catmull-Rom tangent, so Zig Zag,
Scribble and the render goldens are unchanged.
Fixes#1643
warp_point worked on box coordinates normalised to -1..1 on both axes:
Arc's radius was in x units but its edges were offset in y units, so a
box that isn't square bent into no circular arc (skewed sides from
Bend 10 %), and at 100 % the radius (2/π) was smaller than the
half-height, folding the inner edge over. warp_point now takes the
box's aspect along the warp; Arc keeps the centre line's length on a
circular arc in real proportions, with concentric edges, and an inner
edge that would pass the centre stops there. Other styles are as they
were; a square is bent as before.
Fixes#1578
The public 3D and Materials panel options list Depth, Twist, Taper and Cap
for every 3D type; Inflate had only Depth.
- Twist (0° to 360°) and Taper (1–100 %) turn and scale the back about the
shape's centre, as Extrude & Bevel's do: a puffed back is turned and
lowered in proportion, and the sides follow in slices.
- Cap: Solid closes the back; Hollow leaves it off, so the inflated front is
a shell open behind. The documentation doesn't say what Cap means for
Inflate; this reading is stated in docs/three-d.md.
- The dialog's Object tab shows them in the documented order (Depth, Twist,
Taper, Cap), then Volume and Both sides.
At 0 % volume a twisted, tapered Inflate has the extrusion's outline from
every side (tested).
A twisted, tapered, hollow Inflate draws on the canvas exactly as it
exports, and expands to faces with their own ids (tested). ROADMAP and the
parity pages list the new options; the 3D score stays at ~25 %.
The public 3D and Materials panel options give Twist as up to 360°; it took
-360° to 360°. Values beyond either end now hold at that end (the effect is
a day old, so only fresh files carry a negative twist).
The three 3D types besides Revolve, as live effects in the three-d crate,
drawn as shaded vector faces by the canvas, SVG/PDF export and Expand
Appearance alike, from the public 3D and Materials documentation:
- Extrude & Bevel: depth (0-2000 pt), twist, taper, solid or hollow caps,
and bevels in six original cross-sections (classic, rounded, cove, step,
ogee) with width, height, repeat, spacing, inside and both sides.
- Inflate: the shape as a membrane under pressure (a Poisson solve held at
zero along the outline and holes), so it rises vertically from the edge
and rounds without creases; volume, depth and both sides. Steep cells
near the outline are refined without cracks.
- Rotate: every fill and stroke turned in 3D and shaded as one plane.
All three share Revolve's view and lighting parameters, the rotation and
light gizmos (turning about the art's centre) and a dialog with Object,
Rotation and Lighting tabs, with Position presets (Front ... Isometric
Bottom, our own values). An object takes one 3D effect. Inflate cuts the
grid cells that straddle a hole's edge with pathops, hence the new
pathops -> three-d layer order.
Docs: docs/three-d.md, mcp.md, and the 3D rows of the parity docs.
The check added for #1396 dropped the inner contour only when the path itself fell in the hole, which takes a stroke more than twice as wide as the shape. Between one and two times the size (a 30 pt ellipse with a 50 pt stroke), and on rectangles with round or bevel joins, the hole stayed.
An offset contour is now left out when no point of it lies half the weight from its subpath: it is then nowhere the edge of the stroke. Subpaths are judged one by one, and only when the stroke is at least as wide as the subpath's bounds, so ordinary strokes take the same single call as before.
A closed path stroked wider than it is came back as a ring, because the inner offset crossed the middle. When that outline no longer covers the path, the outer contour is kept so the stroke paints solid.
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
Add deterministic document-space grain, highlight controls and a live
dialog with preview, cancel, undo and appearance editing. Preserve
coverage, support existing native and raster export paths, translate
new labels and update parity documentation.
Validate the tonal curve, stationarity, subpixel strength, zoom filtering
and tile seams. Full cargo xtask ci passes all seven gates.
Every edit of an object copied its whole appearance (its fills, strokes and effects, about
540 bytes for a basic object) into the new node, though a move leaves it as it is. Over 45
whole-selection moves of 10,000 paths, undo history grew by 589 MB; now 349 MB (41 % less), and
a nudge or a drag of the selection takes 12 ms instead of 15.
- Node::appearance is a vectorcraft_doc::Shared<Appearance>: copy-on-write. A clone shares it,
and the first change through DerefMut copies it (Arc::make_mut). Reads, writes, equality (also
against a plain Appearance) and the saved form are those of the Appearance itself, so call
sites read and change it as before. Sites that build or assign a whole appearance add .into(),
and the few that need a plain copy take (*n.appearance).clone().
- Node::transform changes the appearance only when it has gradients to transform, and pattern
paints are transformed only when there are some: a move no longer copies an appearance it
doesn't change.
The workspace suite (5,301 tests) and clippy pass with the change; the doc and engine suites
pass again after the transform guard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Eight raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::brushstrokes), under a new Effect › Brush
Strokes submenu between Blur and Distort in the Raster Effects section:
- Accented Edges (edgeWidth pt 1..14, default 2; edgeBrightness 0..50,
38; smoothness 1..15, 5): the edges of the softened object painted
towards white chalk at high brightness or black ink at low brightness;
Smoothness also leaves the faint edges out. The shape stays as it was.
- Angled Strokes (directionBalance 0..100, 50; strokeLength pt 3..50, 15;
sharpness 0..10, 3): light areas in right diagonal strokes, dark areas
in left diagonal ones; 0 makes every stroke a left diagonal, 100 every
stroke a right diagonal. Sharpness brings detail and bristles back.
- Crosshatch (strokeLength pt 3..50, 9; sharpness 0..20, 6; strength
1..3, 1): the detail kept under pencil hatching along both diagonals,
Strength passes of it, the edges roughened.
- Dark Strokes (balance 0..10, 5; blackIntensity 0..10, 6;
whiteIntensity 0..10, 2): short strokes towards black in the dark
areas, long strokes towards white in the light areas.
- Ink Outlines (strokeLength pt 1..50, 4; darkIntensity 0..50, 20;
lightIntensity 0..50, 10): black outlines over the edges, ink hatching
in the shadows, shadows darkened and highlights lightened.
- Spatter (sprayRadius pt 0..25, 10; smoothness 1..15, 5): each pixel
shifted by noise up to 0.4 x the radius; Smoothness makes the grains
larger and smoother.
- Sprayed Strokes (strokeLength pt 0..20, 12; sprayRadius pt 0..25, 7;
strokeDirection Right Diagonal, Horizontal, Left Diagonal or Vertical):
strokes along the direction, scattered by up to 0.3 x the radius.
- Sumi-e (strokeWidth pt 3..15, 10; strokePressure 0..15, 2; contrast
0..40, 16): wet strokes, ink bleeding from the darks along paper
fibres, more ink with pressure and an S-curve contrast for rich blacks.
It works in value only: hues and saturation stay, and so does the
object's shape (no fringe in the transparency).
A stroke averages the colour along a segment through the pixel (16
samples at most, the art softened first when they lie more than a pixel
apart); strokes lie in rows around the object's centre, each row
starting at random and each stroke shifted along itself, with streaked
noise for the bristles. Everything is in document space, so the effects
look the same at any zoom or resolution, move with the object and draw
the same every time; outsets and reaches are exact. On a 2000 x 2000
raster in release the slowest settings take 0.3-2.0 s (Crosshatch at
50 pt with 3 passes the most).
Shared helpers instead of copies: edges::sobel (Glowing Edges now uses
it, unchanged), distort::displace and texture::Tones are pub(super).
Catalogue rows with parameter docs, menu entries, Sprayed Strokes'
direction dropdown, translations (de, es, fr, it, ja, ru, uk, zh-hans,
zh-hant; menu labels in cs and pt-br), tests (parameters and clamping,
outsets and reaches, each filter and option showing, chalk and ink on
the edges only, shadows and rich blacks, Sumi-e keeping the shape and
hues, hatching keeping the tone, strokes smearing along their direction,
Spatter's radius, resolution and move invariance, canvas, multithreaded,
PDF and SVG, the command sweep with junk parameters, the menu) and
ROADMAP.
Behaviour from public documentation only:
https://helpx.adobe.com/photoshop-elements/using/brush-stroke-filters.htmlhttps://www.computerhope.com/jargon/p/photoshop-sprayed-strokes.htm
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::distort), under a new Effect › Distort
submenu between Blur and Pixelate in the Raster Effects section (the
vector Distort & Transform stays its own submenu):
- Diffuse Glow (graininess 0..10, default 6; glowAmount 0..20, 10;
clearAmount 0..20, 15): the highlights, softened over 2 points, glow
white from the brightness Clear Amount leaves clear; white grain as
dense as Graininess says is sprinkled over the object, thicker in the
glow. Transparency stays as it was.
- Glass (distortion 0..20, 5; smoothness 1..15, 3; texture Blocks,
Canvas, Frosted or Tiny Lens, default Frosted; scaling % 50..200, 100;
invert): the object seen through a glass surface; each pixel takes the
colour the surface's slope bends it to, sampled between pixels. Slopes
are taken over a span Smoothness widens. The surfaces are made in code
(Canvas is Texturizer's weave); Load Texture is left out.
- Ocean Ripple (rippleSize 1..15, 9; rippleMagnitude 0..20, 9): smooth
noise ripples about Ripple Size + 2 points across shift the object by
up to 0.03 x magnitude x their size.
The shifts are capped, so the effects' outsets and reaches are exact,
and every surface lies in document space around the object's centre:
the same at any zoom or resolution, moving with the object, identical
on every redraw.
Catalogue rows with parameter docs, menu entries, the Texture dropdown,
translations (and German's missing Canvas), tests (parameters and
clamping, outsets, each texture and Invert, the ripples' reach, the glow
and its grain, resolution and move invariance, canvas, multithreaded,
PDF and SVG, the command sweep with junk parameters, the menu) and
ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The effect dialog showed Inner Glow's `source` as a text field, so the
only way to pick Center was to type the parameter value. It now lists
Center and Edge like the other fields that pick one of a few values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Six raster effects on the pixel-filter pipeline
(vectorcraft_effects::pixel::texture), under a new Effect › Texture
submenu between Sharpen and Video in the Raster Effects section:
- Craquelure (crackSpacing pt 2..100, default 15; crackDepth 0..10, 6;
crackBrightness 0..10, 9): the object on relief plaster that cracks into
plates about Crack Spacing apart (a Voronoi network over jittered points)
and along the quarter, half and three-quarter contours of its softened
tones. Depth sets how dark and wide the cracks are and how high the
plates' bevels and the tones stand (lit from the top left); Brightness
how brightly the surface is lit.
- Grain (intensity 0..100, 40; contrast 0..100, 50 = unchanged; grainType
Regular, Soft, Sprinkles, Clumped, Contrasty, Enlarged, Stippled,
Horizontal, Vertical, Speckle; default Regular): coloured 1-point grains,
smooth ones, clumps, 2-point grains, streaks along rows or columns, dark
specks; Sprinkles and Stippled use the background colour, white.
- Mosaic Tiles (tileSize pt 2..100, 12; groutWidth 1..15, 3; lightenGrout
0..10, 9): irregular tiles bevelled at their edges, with sunken grout half
a point wide per step, lightened as Lighten Grout says.
- Patchwork (squareSize pt 0..10, 4; relief 0..25, 8): squares filled with
the colour around their centres, raised to heights that follow the
highlights and shadows, a little more or less at random.
- Stained Glass (cellSize pt 2..50, 10; borderThickness 1..20, 4;
lightIntensity 0..10, 3): single-coloured panes leaded in the foreground
colour (black, half a point per step), lit from behind at the object's
centre and fading out towards its corners (PixelSpace gains `extent`).
- Texturizer (texture Brick, Burlap, Canvas, Sandstone, default Canvas;
scaling % 50..200, 100; relief 0..50, 4; lightDirection Bottom, Bottom
Left, Left, Top Left, Top, Top Right, Right, Bottom Right, default Top;
invert): the object on a surface in relief. The four surfaces are height
fields generated in code (bricks in stretcher bond, plain weaves coarse
and fine, octaves of smooth noise); no image files. Load Texture is left
out.
Every pattern lies in document space around the object's centre, so the
result is the same at any zoom or raster resolution, moves with the object
and is identical on every redraw (hash noise of cell indices); slopes are
taken in document units. Work per pixel is bounded (a 5 x 5 cell search,
four or five height samples, box blurs); parameters are clamped to their
ranges and finite-checked. The Pixelate helpers (Place, the cell search,
the softened colours) are shared, Mezzotint uses the shared smooth noise,
and the effect dialogs' dropdowns translate their labels in an "effect"
context where the plain word means something else (Soft, Horizontal and
Vertical are type settings in Japanese and Chinese).
Catalogue rows with parameter docs, outsets and reaches, menu entries,
dropdowns (Grain Type, Texture, Light Direction), translations, tests
(parameters and clamping, cracks and contours, ten distinct grains, tiles
and grout, squares in relief, leaded panes and the centre light, the
textures lit and inverted, the same at twice the resolution and when
moved, canvas, multithreaded, PDF and SVG, the command sweep with junk
parameters, the dialogs and the menu) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds the Video group to the raster effects, after Sharpen:
- De-Interlace…: Eliminate Odd or Even Fields, Create New Fields by
Duplication or Interpolation. The fields are the rows of the document's
raster grid (Document Raster Effects Settings › Resolution, carried to
the filters as PixelSpace::line) counted from the top of the page, so
the result is the same at any zoom and moves with the page. A line
taken out copies the line above (the one below at the top), or takes
the average of the two.
- NTSC Colors (no options, applied at once): colours a composite
television signal can't carry, with luma plus chroma past 110 % of white
or luma minus chroma below -20 % in YIQ, have their chroma cut to fit,
keeping their luma. Saturated yellow, cyan and pure red lose some
saturation; legal colours stay as they are.
Catalogue rows with parameter docs, dialog dropdowns, menu, translations,
tests (effects, canvas, command sweep junk, menu) and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
