Guides dragged out of a ruler did not snap at all (only Shift to the ruler's
ticks): they now go through the engine (`Session::ruler_guide`, a
`NewGuide` previewing `guide.add`, one undo step) and snap as a moved guide
does: with Smart Guides to the edges, centres (so the sides' midpoints) and
anchors of the art and of the artboards, labelled; with Smart Guides off,
View > Snap to Point pulls new and moved guides onto anchors. Moving art
with the Selection tool already snapped flush to artboard edges and centres
with Smart Guides on; a test now covers it.
Artboard guides: `Guide.artboard` holds an artboard id (written only when
set, so canvas guides save as before and older files open unchanged).
`guide.add {artboard}` makes one, `guide.list` reports it; a guide dragged
out of a ruler with the Artboard tool belongs to the active artboard. It is
drawn, picked and snapped to across its artboard only, moves with it
(`artboard.move`, a pure move in `artboard.setProps`, `artboard.rearrange`),
is copied with it (`artboard.duplicate`, Alt-drag copy) and deleted with it
(`artboard.delete`, the guide selection kept in step).
Guides as Layers rows with their own lock and hide (part d) stay open: ruler
guides are not layer nodes; Lock Guides locks them all, and Make Guides
paths are Layers rows already. Listed in the ROADMAP parity row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Artboard tool chosen, Copy and Cut take its artboard together with
the art fully inside it (when Move/Copy Artwork with Artboard is on), and
Paste brings both back in one undo step: Paste right of the last artboard,
Paste in Place / in Front / in Back where it was, into this or another
document, the art going back into the layers it came from (Paste on All
Artboards pastes the art alone). The clipboard carries the artboard
(Clipboard::artboard); a pasted artboard keeps its name when it is free.
Duplicate Artboards (the Artboards panel menu, and now a row dragged onto
New Artboard) copies the art too: artboard.duplicate {index?, art?} defaults
to the Artboard tool's artboard and moveArt option and reports the copies.
It shares copy_artboard with the Alt-drag copy (artboard.move {copy}).
New commands reachable over MCP: artboard.copy and artboard.cut
{index?, art?}; edit.copy / edit.cut run them while the Artboard tool is
chosen (and are enabled then with nothing selected). Docs (mcp.md), the
tool and panel docs, translations of the new labels and the ROADMAP follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fourteen more Preferences options that were stored but read by nothing now
act, for the mouse and for agents (prefs.set, then pointer_gesture,
press_key or the commands):
- Selection & Anchor Display: Snap to Point and its distance (with Smart
Guides off, View > Snap to Point lands a dragged selection's grabbed
point, drawn points and reference points on anchors and ruler guides);
Move Locked and Hidden Artwork with Artboard (artboard.move, the Artboard
tool and Rearrange; off, hidden art now stays too); Enable Rubber Band for
the Pen and Curvature tools; Handles (solid, hollow, large);
Show handles when multiple anchors are selected (canvas and Direct
Selection's handle picking); Hide Corner Widget for angles greater than.
- General: Transform Pattern Tiles is the default of a new `patterns`
param on object.transform/move/rotate/scale/reflect/shear/transformEach
(journalled when the art uses a pattern), and the transform dialogs get a
Transform Patterns checkbox; Select Same Tint % (off, Select > Same
Fill/Stroke Color takes every tint of a global or spot swatch).
- Type: new type.step {attribute, by} steps size, leading, tracking, kerning
and baseline shift by the Size/Leading, Tracking and Baseline Shift
increments; Increase/Decrease Font Size (Cmd+Shift+. and Cmd+Shift+,);
the Type tool's Alt+arrows (kerning at a caret or tracking, leading,
Shift for baseline shift, Cmd/Ctrl for five steps). Enable Missing Glyph
Protection keeps characters a new font lacks in the font that had them
(text.setStyle, text.setRangeStyle). Fill New Type Objects With
Placeholder Text: type the Type tools place starts with placeholder text,
selected (text.create / text.createInPath take `placeholder`).
Units > General, Stroke and Type were already the single source of truth
(units.rs). Auto Size New Area Type, Show Font Names in English and
Highlight Alternate Glyphs need subsystems the app doesn't have yet and
stay open with the rest of #394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Snapping to the Artboard Tool
Merged with the Artboard tool's Alt-drag duplicate (#348): a copy snaps too, and to the artboard
and art it leaves behind (a move skips them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.move with copy and artboard.duplicate now make the copy with one helper: a
new id that can't overflow and a name of its own (`<name> copy`, then `<name> copy 2`…,
so two copies of one artboard no longer share a name). `moved` lists the copies a copy
moved rather than the originals it left. Test it with and without moveArt, and note
Alt-drag in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Alt-dragging an artboard moved it like a plain drag. artboard.move now
takes copy: it leaves the artboard (and the art it carries) where it
is and moves a copy, named "<name> copy", with copies of that art. The
Artboard tool previews it while Alt is held, as "Duplicate Artboard"
(Alt pressed or released mid-drag switches between copy and move),
and makes the copy the active artboard, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour linked to a global or spot swatch keeps a tint (Paint::Solid.tint, 1 by default and
left out of files at 100 %): paint.setFill/setStroke {swatch, tint} apply the swatch at that
percentage, swatch edits recolour every linked colour at its own tint, and Color::tinted
resolves it (CMYK and Gray inks scale, RGB mixes toward white). swatch.new saves a tint as a
tint swatch ("Ink 40%") linked to its base. Spot tints separate as that percentage of their
plate (Separations Preview, PDF Separation value) instead of an ink-ratio guess. Adjust Color
Balance's Global mode (tint) shifts the tints of linked colours. The Color panel shows Tint
mode (the swatch chip, its name and a T slider) for linked colours; the Swatches panel
highlights the tint swatch in use. Gradient stops get the same link and tint fields (the
swatch walks cover them), so GradientStop is no longer Copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking the Eyedropper opens Eyedropper Options (dialog
eyedropperOptions): raster sample size (point, 3x3, 5x5) and Picks Up /
Applies trees (transparency; focal fill colour, transparency, overprint;
focal stroke colour, transparency, overprint, weight, cap, join, miter,
dash; character and paragraph attributes). The options live in the
preferences (Prefs::eyedropper, eyedropper.setOptions, prefs key
eyedropper) and replace the earlier appearance/transparency switches.
appearance.copyFrom takes pickUp/apply overrides, reverse (Alt-click:
the selection's attributes onto the clicked object) and append
(Shift+Alt-click: add the source's fills and strokes). Type copies font,
size and paragraph attributes to type. Clicking an image samples its
pixels; sampled colours keep their colour model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Gradient tool handles (a drawn vector's start and end, the end handle and the moved start) snap to anchors, edges
and smart guides, with the guide overlays; Shift constrains to 45° steps from the Constrain Angle preference
(`ToolContext::constrain_angle`, `constrain_angle_from` in geom). Double-clicking a toolbar button runs the new UI
command `tool.options {tool}`: the Gradient tool opens the Gradient panel, the Eyedropper opens Eyedropper Options
(`eyedropper.setOptions {appearance?, transparency?}`, which `appearance.copyFrom` honours and its params override).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Gradient panel gains the Fill/Stroke proxy, a thumbnail menu of the document's gradient swatches with Save to
Swatches, Angle and Aspect Ratio fields with preset menus (the shared spin field), Show/Hide Options, and a stop
colour row whose eyedropper samples the next colour clicked on art into the selected stop (Eyedropper tool option
`stop`, `paint.sampleColor {stop}`). On the slider a selected midpoint diamond shows and sets its midpoint in
Location, double-clicking a stop opens the shared stop popover, Alt-drag copies a stop and Alt-dropping it on
another swaps their colours (`swap_stop_colors`), and a dropped colour swatch adds or recolours a stop. Clicking a
stop no longer falls through to the add-stop strip. Swatch tiles and the gradient thumbnail drag onto art, which
paints the object under the pointer through `paint.setFill`/`paint.setStroke {ids}`. The panel, the popover and
the Color panel share one stop-writing helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No behaviour change: every command keeps its id, label, menu, shortcut and
params doc.
- Engine: swatch.* -> cmd/swatch.rs, graphicStyle.* -> cmd/style.rs,
appearance.* (incl. copyFrom) -> cmd/appearance.rs, stroke.set/setAdvanced
-> cmd/stroke.rs, paint.editGradient/setGradientGeom -> cmd/gradient.rs.
Shared helpers in cmd/mod.rs: leaf_targets/paint_targets (replacing three
copies) and unique_name (swatch and graphic style naming).
- UI: dialogs.rs -> dialogs/ with one file per dialog and a DialogSpec
registry (one DialogKind row per dialog); shared field widgets in
dialogs/form.rs. Headless frame tests draw and confirm every dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
