With the Width tool, Escape did not deselect the selected width points:
they stayed selected, Delete still removed them, and in isolation mode
the same Escape left isolation mode. The reference app's shortcut list
gives Esc for deselecting a width point.
Escape now deselects the Width tool's selected width points. The path,
its widths and the undo history do not change, and no command is sent.
While width points are selected the tool takes Escape, so that Escape
does not also leave isolation mode. With no width point selected, and
during a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app switches an arc between open and closed with C,
flips it with F and changes its angle with Up/Down while it is dragged
out. VectorCraft's Arc tool ignored these keys during a drag.
While an arc is dragged out, C now switches it between an open and a
closed path, F switches its base between the X and Y axes in the same
box, and Up/Down raise and lower its slope by 10 within -100 to 100.
Each press switches once. The arc drawn on release uses the new values,
and they stay as the Arc tool's options. With nothing dragged, C and F
are shortcuts as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
A release that arrives at a new position with no drag before it now counts
as movement, so Alt pressed at that moment no longer switches the stroke
to the Smooth tool.
Alt switched a Blob Brush stroke to the Smooth tool while the stroke held fewer than two
points, so a drag that had moved less than the sampling tolerance still switched when Alt
went down. The tool now records whether the pointer has moved from the press point at all.
A release with Alt held, after a press without Alt and no movement, also smooths instead of
painting a dot, matching the Smooth cursor shown before it.
The reference app switches the Blob Brush to the Smooth tool while Alt
(Option) is held. In VectorCraft an Alt drag with the Blob Brush painted
a blob like any other drag.
With Alt held at the press, or pressed before the drag has moved, the
Blob Brush shows the Smooth tool's cursor and a thin line without the
length label, and the release smooths the selected paths under the
drag with path.smoothRegion, as the Pencil does when Alt key toggles to
Smooth Tool is on. Shift does not constrain a smoothing drag, a stroke
that has moved keeps painting when Alt goes down, and with nothing
selected the release changes no path.
Choosing another tool during a Pencil smoothing drag no longer leaves
the Pencil showing the Smooth tool's cursor when it is chosen again.
deactivate now clears the smoothing state, for the Blob Brush too.
Docs: docs/target-app-parity.md.
With "Alt key toggles to Smooth Tool" on, an Alt drag with the Pencil
smoothed within the Pencil's "Edit selected paths" Within distance. At
0, which turns editing off, it smoothed nothing. It now smooths within
the Smooth tool's 12 px radius at every Within value.
Deleting a point of a finished path with the Curvature tool sent
path.removeAnchor, which refits the two segments that met at the point so
one curve follows them. The path kept the bend of the deleted point
instead of curving through the points that remain.
The tool now sends path.removeAnchor with curvature: true, which uses the
new curvature_remove. Each smooth neighbor takes new handles from its new
neighbors, and an end beside one of them takes its end handle again. A
corner neighbor keeps its handle directions, and its handle on the new
segment scales with the segment's chord. With two points left, the points
that curve lose their handles. Object > Path > Remove Anchor Points and
the Delete Anchor Point tool still refit the curve.
With the Selection tool, a single selected grid repeat shows a handle below the grid (rows), one right of it (columns), one past its bottom-right corner (both) and sliders between its first two columns and rows (horizontal and vertical spacing), as the public Set grid repeat options page describes. Each drag previews object.repeat.options and commits as one Repeat Options undo step; Escape cancels, and a drag that ends where it began leaves no step. Bounding-box handles keep priority where they overlap, and the controls hide with the edges or the bounding box. Before, a drag there scaled the source or started a marquee.
Part of #2691.
Every pointer move of a frame went to whatever tool was active, so with
a fast mouse (or a pen) a tool whose drag preview is costly (the
Selection tool moving a large selection, Free Distort, the Width tool)
redid it for each, up to 64 times a frame.
Tool::wants_samples (default false) says a tool builds a stroke from
the drag's samples: the Pencil, Paintbrush, Blob Brush, Eraser, Knife,
Smooth and Path Eraser answer true (the Paintbrush through its wrapper),
the Join tool doesn't. The canvas still reads the frame's moves every
frame, so the macOS feed's pressures stay paired, but replays them only
to such a tool; every other tool gets one drag a frame at the latest
position. A frame whose moves end where the last frame's did still
reaches the tool.
Tests: only_the_freehand_tools_get_every_move_of_a_frame (Pencil,
Paintbrush and Blob Brush get the 19 moves before the last, Selection,
Direct Selection and Width none),
a_mouse_stroke_keeps_a_frame_that_ends_where_it_started,
the_freehand_tools_want_every_sample, and
a_mouse_stroke_keeps_every_move_of_a_frame now checks every position in
order, not only the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Pencil stroke always previewed as the path it draws, with its full
appearance: with a fill set, the fill flipped between the shape and its
inside-out as the stroke crossed itself or curved back, and hid the line
being drawn.
Pencil Tool Options get a Live preview checkbox, above Live curve
fitting, on by default and kept with the tool's other options
(`livePreview`, settings.rs). With it off, the stroke previews nothing
while it is drawn: a thin line follows the pen (the drag overlay the
Knife and Blob Brush already show), and the release, or a switch of
tool mid-stroke, draws the path with its fill and stroke, as one undo
step, as before. Escape still cancels the stroke. With it on nothing
changes. The Paintbrush has no such option and keeps previewing.
Public reference: Draw and edit paths using the Pencil tool,
https://helpx.adobe.com/illustrator/using/tool-techniques/pencil-tool.html
(lists Live preview and Live curve fitting among the Pencil's options).
The checkbox label is translated in all 24 catalogs.
Tests: pencil_with_live_preview_off_shows_a_thin_line_until_the_release
(tools), pencil_with_live_preview_off_draws_the_filled_path_on_release
(engine), and the freehand dialog test shows the checkbox for the Pencil
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selected compound path (a shape with a hole, such as one made with
Object › Compound Path › Make) could not be redrawn with the Pencil or
the Paintbrush: at the press, find_redraw looked only for selected
objects that are paths themselves, and a compound path's paths are its
children. The stroke then drew a new path, which Keep selected selected
in place of the compound path, so every later stroke near the shape drew
a new path too: redrawing seemed to stop working.
- find_redraw takes a selected compound path's member paths as well,
the nearest one within Edit selected paths within of the press.
- path.freehand's redraw keeps the compound path selected (or, with Keep
selected off, takes it out of the selection) when the redrawn path is
one of its members, so the next stroke redraws it too.
Test: pencil_redraws_a_selected_compound_path redraws the outer path and
then the hole of a selected compound path; it fails without this change
(the first stroke draws a new path).
cargo xtask ci: every step passes except one test in `test`,
vectorcraft-pdf tests_import_fidelity::text_becomes_point_type, which
fails the same way on unmodified main on this machine; it is unrelated
to this change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Draw freeform paths with the Pencil tool says a small star appears on
the Pencil when it is ready to draw a freeform path, and Reshape paths
with the Pencil tool says the star disappears over a selected path the
drag reshapes. The Pencil cursor had no star.
- New Cursor::PencilNew: the Pencil's crosshair with a small star where
the closing cursor has its ring. It becomes the crosshair with Use
Precise Cursors and as a system cursor.
- The Pencil shows it before a press when neither find_extend nor
find_redraw (the lookups the press uses, within Edit Selected Paths)
finds a selected path under the pointer. Over such a path and while a
stroke is drawn, the cursor has no star.
Docs: docs/target-app-parity.md.
dotCooCoo