Eraser Tool Options' Size takes Fixed or Pressure and a Variation as the
Blob Brush's does: the tool records the pen, and path.eraseRegion outlines
the squashed drag at the pen's widths, stretched back to the tip's angle
and roundness. The pressure parsing and outline move to draw2's common
helpers, shared by both commands.
Blob Brush Tool Options' Size takes Fixed or Pressure and a Variation, as
the brush options' Size does: with Pressure the brush is Size − Variation
wide where the pen presses lightest and Size + Variation where it presses
hardest. The tool records the pen pressure of each point and shows each
step of the drag as wide as the pen pressed there; path.blob takes
[x, y, pressure] points with sizeMode and sizeVariation and outlines the
stroke with that width profile. A stroke without pressure keeps the Size,
and Fixed with no variation stays the default.
https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html
From the review of #4605. TraceParams::swatches isn't in the settings' JSON (serde skip), so a Document Library trace whose swatches were edited while it ran still applied, with the old colours; the trace's inputs now hold them. The 100 ms repaint that keeps background work moving left traces out, so without input a finished trace could wait for the next event.
Create Gradient Mesh's To Center / To Edge highlight lightened every point
towards RGB white, so a CMYK (or grey) point became display RGB. A patch with
any non-CMYK corner then mixes in RGB, and the PDF writer separated those
colours back to CMYK with K = 0, moving ink off the K plate. Points now
lighten towards white in their own colour model (no ink for CMYK), so the
mesh stays CMYK and K shrinks with the other inks. Flat meshes (highlight 0)
already kept their inks.
Tracing a photo or a large image ran inside imageTrace.make on the UI
thread, so the window froze for as long as the trace took, with nothing
to say it was working.
A trace the user asks for (Object > Image Trace > Make and Make and
Expand, the task bar's Image Trace, the Image Trace panel's Trace and
presets) now runs on a thread of its own, as heavy plug-in filters do.
The status bar says so, and after 0.4 s a progress window shows how
many of the image's colors are traced, with Cancel and Continue in
Background (imageTrace.cancelRuns, imageTrace.hideRuns).
The result goes back to the command it was prepared for
(cmd::TraceRun, Traced::hand_in), which takes it only for the same
object, image and settings, so the edit is one undo step as before. A
newer trace of the same object replaces one still running, and a trace
whose image or settings changed meanwhile changes nothing. The control
channel, MCP, scripts and the web trace at once, as before.
The tracer reports its stages and color layers to a callback and stops
when it says so (trace_watched).
In typography and Illustrator, Shift+Enter inserts a soft return (forced
line break) rather than ending the paragraph. Text wraps to the next line
without applying paragraph-level spacing (space before/after, first-line
indents), list continuation lines keep their parent item without repeating
markers, and justified text does not stretch lines ending with a soft return.
- Forward active modifier keys for Enter in ui-egui shortcuts so the tool
detects Shift+Enter.
- Type tool inserts U+2028 (LINE SEPARATOR) on Shift+Enter.
- Text shaping and layout treat U+2028 as an invisible zero-advance control
character, breaking the line in point and area type.
- Paragraph spacing and list markers apply once per paragraph as intended.
With nothing selected, a click with the Eyedropper picks up an object's attributes and an Alt/Option-click on another object applies them, as the reference app's Eyedropper does. Alt-click only copied from a selected object, and with nothing selected it failed. The session now keeps a copy of what appearance.copyFrom picked up last, and a reversed copy with nothing selected applies it.
Preview, Embed ICC Profiles, Create PDF-Compatible File and the other VectorCraft Options went back to their defaults for every document not saved yet. A native Save or Save As now records the options it used in the preferences (not the artboards it picked, nor Use Compression, which its preference decides), and file.formatOptions offers them for a document not yet saved as a native file. A document saved before keeps its own.
While an opacity mask is edited the Layers panel lists only the mask, so a new layer was added where no row showed it, and only the panel's layer count went up. Both commands are now disabled then, as isolation commands already are (outside_mask_editing).
With a layer selected, Object > Hide > Unselected Artwork hid every object
on that layer, since the selected layer was dropped from the objects to
keep. The objects of a selected layer now count as selected.
While Lock Guides is on, a group that held a guide path was hidden whole,
which hid the guide with it. Guide paths now count as selected, so the
command keeps such a group visible and hides its other members one by one.
File > Document Color Mode and document.open {colorMode} converted the
colors of the layers, symbols, pattern tiles and swatches only. Graph
designs, graphic styles, the art of opacity masks, the tile that
pattern editing's Cancel puts back and the art of brushes kept their
old color model (only a tint of a global swatch in a graphic style or
a mask followed the swatch), so a CMYK document could still apply,
place or print RGB colors from them.
These now convert with the rest, in the same undo step: their solid
colors, gradient stops, text runs and mesh points, nested masks
included. A Hue Shift brush's key color takes the converted color of
the art color it matches, a tint of a global swatch included. The
brush library is stored again only when one of its colors changed. A
tint of a global swatch in any of these places becomes the converted
swatch's color at its tint, as in the layers. The reply's changed
count covers the colors of the layers, symbols, graph designs, pattern
tiles and opacity masks; the colors of graphic styles and brushes
convert without being counted.
Docs: docs/mcp.md, docs/target-app-parity.md.
While an opacity mask or a pattern was edited, a Shaper scribble and
Object › Shaper › Release and Expand ended isolation, and a Shaper
double-click on a Shaper Group isolated the group's original shapes.
Each replaced the editing layer's isolation while the document stayed
in mask or pattern editing. A click on the Shaper Group's mode widget
did the same through object.isolate.
A scribble, Release and Expand now keep the editing layer isolated in
these modes, and end isolation as before outside them. A double-click
with Shaper selects the original shape under the pointer without
isolating the group's original shapes, and the mode widget does not
show while a mask or a pattern is edited.
Docs: docs/shaper.md, docs/target-app-parity.md.
The Live Paint Selection tool acted only on the press, so a drag
selected at most the one face or edge under the pointer. The reference
app selects every face and edge a marquee touches, partly enclosed ones
included, and a Shift-drag adds them to the selection or removes them.
A drag of 3 pixels or more now draws a marquee. On release, select.set
selects the faces and edges it touches, or select.none runs when it
touches none. With Shift held at the press, select.toggle runs with
what it touches, and nothing runs when it touches none. A face that holds the whole marquee counts. Select Fills off
leaves faces out, and Select Strokes off leaves edges out.
A click now changes the selection on release instead of on the press,
so Escape between the press and the release, which also removes the
marquee, leaves the selection as it was. The tool no longer highlights
or selects the faces and edges of a Live Paint group that is locked, on
a locked layer or on a locked artboard, or that is outside the isolated
art in isolation mode.
Docs: docs/mcp.md, docs/target-app-parity.md.
After a click picked the first object with the Blend tool, Escape did
nothing: the pick stayed, and the next click on another object blended
the two. After a blend was made, Escape did not stop the next click
adding to it either.
Escape now drops the object picked first and stops the next click
adding to the blend just made, as a click on empty canvas does, so the
next click picks a new first object. The document and the selection
stay as they are, and no undo step is added.
Docs: docs/mcp.md, docs/target-app-parity.md.
Enter Isolation Mode worked while an opacity mask was edited, and Edit
Opacity Mask and View Opacity Mask worked in isolation mode, so each
mode replaced the other's isolated art. In the reference app, isolation
mode can't be entered while a mask is edited, and mask editing can't be
entered in isolation mode.
object.isolate and perspective.editText, which shows type in isolation
mode, are now off while an opacity mask is edited, and a call returns
an error that ends "stop editing the opacity mask first". In isolation
mode transparency.editOpacityMask and transparency.viewOpacityMask are
off, and transparency.makeOpacityMask refuses one target, an object or
a layer, which it would take into mask editing; a call returns an error
that ends "exit isolation mode first". Make Opacity Mask with two
objects still masks one with the other. Pattern editing mode does not
count as isolation mode for these commands.
Object > Perspective > Edit Text, the canvas context menu and the
Transparency panel's menu and Make Mask button follow the commands'
enablement. A click or Alt-click on the mask thumbnail in isolation
mode shows the error and does not edit the mask. While a mask is
edited, the Contextual Task Bar leaves out Isolate, and the Properties
panel's Quick Actions leave out Isolate Group.
Docs: docs/mcp.md, docs/target-app-parity.md.
Envelope Options stored Anti-Alias and Preserve Shape Using, but nothing that
draws an image read them: a distorted image was always smoothed and always
cut into clip groups.
- With Anti-Alias off, each piece of a distorted image is marked pixelated
(saved as `pixelated`). The renderer draws it with nearest-neighbor
sampling and without mips, SVG export writes `image-rendering: pixelated`,
and PDF export writes it without /Interpolate.
- With Preserve Shape Using Transparency, each piece is the image with a
white opacity mask in the piece's shape instead of a clip group. The
renderer paints an image whose mask is one plain white path straight into
that path, as it does for an image in a clip group, when the path lies
inside the image's frame.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app disables its Lock, Hide and Show All menus in
isolation mode. In VectorCraft every item of Object › Lock and
Object › Hide, Unlock All and Show All worked there.
In isolation mode, object.lock, object.lock.above,
object.lock.otherLayers, object.hide, object.hide.above,
object.hide.otherLayers, object.unlockAll and object.showAll are now
off. Their menu items are greyed out, and a call returns an error
that ends "exit isolation mode first". The Contextual Task Bar's
Lock button is greyed out too, and the Properties panel's Quick
Actions leave out Lock. Pattern editing mode and opacity mask editing do not count as
isolation mode for these commands. The check is outside_isolation in
cmd.rs, with has_selection_outside_isolation beside it.
Docs: docs/mcp.md, docs/target-app-parity.md.
A closed arc from Arc Segment Tool Options, an Arc tool drag or
shape.arc with lengthX and lengthY closed through the box's bottom-left
corner with Base Along X, which makes a convex arc a quarter-ellipse
sector. With Base Along Y it closed through the corner a convex arc
bulges toward, so it drew the thin sliver between the arc and that
corner instead.
Such a closed arc now closes through the corner across from the one a
convex arc bulges toward with either base, so the Y-axis arc, open or
closed, convex or concave, is the X-axis arc mirrored top to bottom.
Open arcs and arcs with Base Along X are unchanged. The two-point
shape.arc form, whose params list no baseAlong, now closes through
(x1, y2) whatever baseAlong says.
Docs: docs/target-app-parity.md.
The merge test covered adjacent matches and a path of another color
between two matches. It now also covers a matching path the stroke
does not touch, between two it touches: both touched paths merge into
the upper one and the untouched path is left as it was.
A Blob Brush stroke used to merge with every closed path of its fill
color and no stroke that it touched, anywhere in the document, across
layers and groups and past objects of other kinds. It now merges with
the topmost such path it touches, and with the other touched matching
paths in the same group or layer that are next to that path in
stacking order, with no other kind of object between them. Merge only
with selection still limits the candidates to selected paths. The
merged path keeps the topmost path's id and place.
The reference app places a new layer below the selected layer with
Ctrl+Alt-click (Command+Option-click) on the New Layer button, and a
new sublayer at the bottom of the layer list with the same click on
the New Sublayer button. In VectorCraft that click opened Layer
Options, and New Layer and New Sublayer always added the layer above
the current layer and the sublayer on top of the layer's contents.
layer.new takes below, which adds the layer directly below the current
layer at its level, and layer.newSublayer takes bottom, which adds the
sublayer under the parent's contents. In a clipping layer the new
sublayer goes above the clipping path. Each is one undo step, and
below is refused together with top. A Cmd/Ctrl+Alt-click on the
Layers panel's New Layer and New Sublayer buttons runs them. A plain
click, an Alt-click and a Cmd/Ctrl-click work as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Type tool heard of Undo and Redo only when they ran as top-level
commands. As steps of command.batch, they left the caret where it was,
and the tool took the batch for an outside edit. Session::execute now
tells the active tool about each nested edit.undo and edit.redo.
command.batch also tells the tool when it begins, ends or rolls back.
The Type tool keeps its caret and its edit records at the start of each
batch and puts them back when a failed batch rolls the documents back.
While the Type tool edits type, Edit > Undo and Redo (the menu, the
keyboard, the History panel and MCP all run edit.undo and edit.redo)
left the caret at its byte offset, clamped to the text. Typing "abc"
before "XYZ" and pressing Undo left the caret after "XYZ".
The engine now tells the active tool about edit.undo and edit.redo
before it finishes the command. The Type tool keeps the edited text and
a list of the steps that changed it, and puts the caret, with nothing
selected, at the end of the span the step changed: where typed text
began after its Undo, after restored text after the Undo of a deletion,
and after retyped text after Redo. For the steps the tool made, it keeps
where the span ended, so text that repeats the characters next to it
puts the caret at the right end. A step that changes no characters,
such as a formatting change, leaves the caret and the selection as they
are. Typed lists keep their caret positions.
An Alt-click right of a short layer name, inside the wider rename
target, no longer replaces the selection. The isolated layer's own row
now selects the art inside it (layer.selectAll), where it cleared the
selection before. The doc line says the click selects visible, unlocked
art and clears the selection on a hidden or locked layer.
bflatastic