Paragraph panel › Kinsoku Set (with the East Asian options) and `text.setFormat {kinsoku}`, as
decided in #633:
- Hard: today's set, so existing documents don't change; the default, and not saved.
- Soft: as Hard, except that 々, the prolonged sound mark ー (JLREQ cl-10) and small kana (cl-11)
may start a line: JLREQ's level 3 line-breaking rules (Appendix C.3). Half-width forms aren't in
those classes and stay off the line start.
- None: no kinsoku.
The setting reaches every break the composers consider (greedy, every-line and hyphenation
points). Reset Panel returns to Hard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The engine refuses to write over the file a document was read from when
reading it left something out, unless acknowledgeLoss is passed. In the
app that surfaced as an error naming a parameter. File > Save, Save As,
Save a Copy, Save as Template and Export As now ask instead ("Replace
'a.eps', the file this document was opened from?", with what would be
lost), and OK repeats the command with acknowledgeLoss. Closing a
document whose save asks keeps it open, and so does Package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- a story is read once however many text objects name it; the text objects, their pairs with the
page's type, the pieces of a line and a story's size are capped, and over a cap the layers aren't used
- the ASCII85 of the text document is bounded before it is decoded
- joining the pieces of lines that interleave no longer removes the wrong pieces
- a run length too large for the text saturates instead of overflowing
- a dictionary left open at the end of a layer, and layers nested deeper than are read, make the
file one that comes in as its page (they were silently dropped)
- a file whose editing data can't be decoded says so, and the notes about art that was too much or
too far away count as losses, so writing over the source asks first
- the private data of a .ai is inflated under a cap of its own (the PDF reader's decoder has none)
- the other writers (PDF, selection, office, print) ask before replacing a source that lost things,
and a recovered copy remembers that
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
An Illustrator EPS is a flattened page plus, after %%EOF, an editing copy of
the document; a PDF-compatible .ai carries the same in its private data.
Importing only the page lost layer names, order, visibility, hidden layers
and hidden objects and hidden text.
- eps: read the editing copy (Zstandard %AI24_DataStream, older zlib
%AI9_DataStream) into layers, sublayers, groups, compound paths, clip
groups and hidden objects, run by the existing PostScript interpreter.
Falls back to the page, with a warning, when a shown layer uses an
operator that isn't read or the art differs from the page by over 5%.
- eps: read the text document (ate.rs) to place type on hidden layers and
objects; the page's type is matched to the file's text objects by
position (pieces of a line included) and kept with the nearest one when
none claims it. Area type and type on a path are left out with a note.
- pdf/engine: .ai files go through the same reader.
- engine/cli: a file whose import left things out isn't overwritten unless
asked (acknowledgeLoss, --replace-lossy).
- eps: font names re-encoded with a *<n> suffix resolve to their family.
- i18n: es/it/ru for the new import messages; ROADMAP updated.
Container and text-document formats were inferred from user-owned files; the
Adobe file format specification was not read.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New from Template... and Save as Template opened their dialog in
~/Documents/VectorCraft Templates. On desktops whose documents folder has
another name (Italian ~/Documenti) or where the folder was never made, the
dialog started in a folder that doesn't exist and showed an error.
- The default Templates folder is now in the user's documents folder: on Linux
and the BSDs the one XDG_DOCUMENTS_DIR names in user-dirs.dirs, elsewhere
~/Documents.
- The folder a dialog starts in is made when missing; where it can't be, the
dialog starts in the nearest folder above it that exists, else home.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The rotate cursor drew an arc with a large triangle under each end, both
pointing straight down and away from the arc, so it didn't read as an arrow.
Each end now has a slim arrowhead pointing on along the arc's tangent, with
the same halo as the other cursors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A fourth Image Trace mode for flat-colour logos. The existing tracer follows hard pixel
edges, so an outline can only be as good as the pixel grid; here each pixel is read as a
blend of the logo's flat colours, the blend is interpolated smoothly (cubic B-spline), and
every outline is placed where two colours are equally present, to a fraction of a pixel.
Outlines are then cleaned the way a person would:
- corners the blur rounded are put back (line fits either side of a bend, intersected);
- near-straight runs and near-circular arcs become exact lines and arcs (Snap Curves To Lines);
- the rest is fitted with as few cubic Beziers as the tolerance allows (Schneider);
- touching colours overlap by 0.06 px so no hairline gap opens between independent fits;
- shapes are painted biggest first; transparent areas fully enclosed by artwork (letters
knocked out of a badge, the counters of an "o") are painted white so the logo reads the
same on any background, or become real holes with Ignore White (each hole belongs to the
smallest outline containing it);
- an outline whose fit strays more than 1.4 px from the raw contour is fitted plainly.
Colours are found automatically (and completed from pixels no blend of the known colours
explains, so a small accent is not lost) or named with `logoColors: ["#rrggbb", ...]` (white is
always its own class; colours closer than 12 count as one; at most ten). Gradients and photos
are refused with advice to use Color (a flat-colour score of the solid areas, 0.93). A
hard-edged source with no anti-aliasing is softened by under a pixel and fitted with looser
snap tolerances. Images over 1024 px on the long side are averaged down first (further, if
they are busy enough to make the unmixing expensive) and the result is mapped back exactly.
More real outlines than we will fit are refused, not silently truncated.
Also: a "Flat Logo" preset, the mode in the Image Trace panel (Method hidden: it always
stacks), the command docs and MCP prompt, es/fr/it/ru translations for the two new messages
and the mode name, and the ROADMAP.
Never-crash: no unwrap/expect/panic, every size and float is bounded and checked, with
tests for degenerate and extreme input (NaN/infinite parameters, 0x0 and 1x1 images, sparse
outlines, an anchor budget, a 200,000-entry palette) and a 250-run randomised no-panic
property test. The B-spline interpolation follows Unser et al. and Thevenaz et al., and the
curve fitter follows Schneider (Graphics Gems); both are written from the papers.
Measured (local experiment, not in CI): a flat-colour logo's vector original rendered down
to a soft 199x100 px PNG and traced. Mean edge error vs the original at 1600 px wide:
built-in colour presets 2.5 to 3.4 px, Flat Logo 0.78 px (0.48 px from a crisp source);
region overlap 0.88-0.91 vs 0.966. About 0.1 s for a 200 px logo.
Tests: 60 new in the trace crate (unmix, field, contours, geometry, Beziers, corners,
outline fitting, palette, end-to-end on synthetic shapes made in code) and 3 in the engine.
cargo xtask ci passes (fmt, clippy, test, assets, brands, layers, wasm): 4,290 tests.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The Transform fields were sized from the row's room, the rotation field was
70 pt, the corner radius 80, Opacity 64, the stroke weight 90 and Keyboard
Increment 80, so the fields didn't line up. One `panels::field_width`, the
Transform fields' width measured from the full row, now sizes all of them (and
the Edit Artboards fields, and the Transform panel's corner radius).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a PDF-compatible .ai (or a PDF saved with Preserve Editing) that has more than one
page showed the Import PDF dialog and imported pages, although the file carries its
VectorCraft document. Opening now restores that document (every artboard and layer) without
asking, as the engine already does when no pages are picked. Placing still asks for the page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- A press with a selection tool inside an artboard makes it the active one, as
the Artboard tool's does; before, only the navigator and the Artboards panel
changed it.
- Paste in Place, in Front and in Back take `artboard` (the UI passes the active
one): the objects go where they were on the artboard they were copied from,
on that artboard. Without it, they paste where they were, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect › Blur › Radial Blur (spin/zoom, draft/good/best) and Smart Blur
(Normal mode), Effect › Sharpen › Unsharp Mask: Photoshop-style filters in
vectorcraft_effects::pixel, run by the renderer on the object's pixels in
stack order with Gaussian Blur and Feather, cached while panning; lengths in
points, bounded work per pixel. PDF, Expand Appearance and SVG export write
the effected objects as images. Dialogs with preview (method/quality
dropdowns, fields in documented order), menu entries, translations, tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Cmd+, is how every Mac app opens its settings. It now opens Preferences on
macOS beside its own Cmd+K, unless a command or one of the user's shortcuts
already has the chord.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The toolbar names its tool groups (Select, Shapes, Draw, Modify...). A new
preference, on by default, turns the names off for a cleaner toolbar: a faint
dash then separates the groups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document tabs drew their close box before the title on every platform, the
macOS convention. On Windows, Linux and the web it now comes after the title,
as those platforms' tabs (and Adobe's own apps there) put it; macOS keeps it
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- artboard.rearrange takes layout (gridByRow, gridByColumn, row, column;
byColumn stays as an alias of gridByColumn) and order (leftToRight,
rightToLeft); Columns is the row count of a grid by column and is
ignored by row and column. It returns {artboards, rows, columns}.
- A Rearrange All Artboards dialog: Layout and Layout Order toggles drawn
in code (widgets::layout_button, previewing the order), Columns/Rows,
Spacing, Move Artwork with Artboard and the artboard count.
- One click: Rearrange All in the Properties panel (Document section with
several artboards, Edit Artboards' Quick Actions); the Artboards panel's
Rearrange button and menu item now open the dialog too.
- Tests for every layout x order (artboards, art riding along, one undo
step), the dialog, the Properties button; the command sweep covers the
new params. Translations for ja, es, it, ru, fr, zh-hans, zh-hant and
pt-br; ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > User Interface > Canvas Color offered Match User Interface
Brightness and White only: with a dark interface the first is a high-contrast
dark canvas around the white page, and White hides where the page ends. Light
Gray, Medium Gray and Dark Gray keep the page's edge in view at a gentler
contrast.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft found fonts only in the system's font folders (and, on Windows,
those font services activate). A new preference names one more folder, read
with its subfolders after the platform's: its fonts are listed in the font
menus and used as if installed, without installing them.
- vectorcraft_text::set_user_font_dirs / user_font_dirs: folders
system_font_dirs adds to every scan (none on wasm).
- prefs fontsFolder (Type > Options > Additional Fonts Folder), trimmed; when
it changes after the first scan, the fonts are scanned again at once, so the
folder's fonts appear (or go) and type in them lays out again.
- The label is translated where Additional Plug-ins Folder is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Artboard tool, the Properties panel showed the active artboard's name,
position and size but no quick way to turn it between portrait and landscape.
It now has a row with:
- Preset: New Document's saved and built-in presets, by category, matched in
either orientation (Custom when none matches); choosing one sizes the
artboard in its current orientation;
- Portrait and Landscape (the New Document toggle): the other one swaps the
artboard's width and height.
The artboard's top-left corner stays put, so no art moves with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Performance › Animated Zoom (with GPU Performance, which dims it when
off): the Zoom tool dragged sideways zooms about the press (right in,
left out) and held still zooms on (Alt: out); a click still steps. Off,
a drag zooms to the area dragged across, now drawn as a marquee. The
hint bar says which.
- User Interface › Large Tabs: taller document tabs with larger titles.
- User Interface › Scale Cursor Proportional to UI: off, the tool cursors
keep their size whatever the UI Scaling (OS and painted cursors alike).
- File Handling › Display Bitmaps as Anti-aliased Images in Pixel
Preview: off (the default), Pixel Preview samples images nearest-pixel
(`RenderOptions::smooth_images`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The Home screen lists the first six of File > Open Recent Files, each by name
(a click opens it) and folder; one that can't be opened says so in the status
bar. With none, there is no section.
- In New Document, a double-click on a preset card creates the document from
it; a click still only chooses it. The Create buttons no longer overwrite a
create asked for earlier in the frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A pinch already zoomed the canvas and a second finger already cancelled the
first finger's press, but dragging two fingers together did nothing: the
canvas only read wheel scrolls, and a touch screen sends touches. The fingers'
movement (egui's multi-touch translation) now scrolls the canvas under either
Zoom with Mouse Wheel setting, and zoom and scroll apply in the same frame, so
a pinch that also slides pans too. Trackpads send scrolls, so nothing counts
twice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Advanced › Create: Fills and/or Strokes, with Stroke (the widest line, px).
With Strokes, each colour's 8-connected parts no wider than the stroke width
(chamfer distance transform) trace as open centre lines instead of filled
outlines: the line is thinned to one pixel (Zhang-Suen with each removal
re-checked, so two-pixel lines survive; staircase corners dropped), its
skeleton becomes runs between ends and junctions (junction pixels merged,
spurs pruned, runs through two-way junctions joined, rings closed), and each
run is simplified and fitted with curves. The stroke width is the line's mean
width (pixels over length). Traced lines get round caps and joins in the
document. Without Fills, wider areas become 1 px stroked outlines.
`imageTrace.make` takes fills, strokes and strokeWidth, and refuses neither
fills nor strokes and a non-positive width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Color mode's colours now come from a Palette (`palette` in imageTrace.make's
params), shown in the Image Trace panel under Mode:
- Limited: the `colors` best colours (what Color did before; the default).
- Full Tone: median cut until no colour box spans more than 96 (Less) … 8
(More) levels per channel, up to 256 colours, set by `colorDetail` 0-100
(the panel's Colors slider for this palette).
- Automatic: flat art (90% of the pixels in a few tight colours) traces with
exactly its colours, anything else as Full Tone.
- Document Library: the most used (at most `colors`) colours of the
document's swatches or of a swatch library (`library`: "document" or a
library id or name, chosen in the panel's Library list), used as they are;
traced shapes fill with the swatch's own colour, its colour model kept.
The library's colours are looked up at every trace, not saved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The Image Trace panel's Advanced options sit under a full-width collapsible
header (widgets::section_toggle, also used by New Document's Advanced
Options); whether it is open is kept with the UI preferences.
- View: Tracing Result, Tracing Result with Outlines, Outlines, Outlines with
Source Image and Source Image, in the panel, the Control bar and the
Properties panel. The view is saved in the Image Trace object's settings
(`trace.view`), kept when it is traced again, set with the new
`imageTrace.setView` command (or `view` on imageTrace.make) and drawn by the
canvas only (RenderOptions::trace_views): exports, printing and Expand keep
the tracing result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Panels other than Properties, Layers and Libraries live in the dock's icon
column, not as tabs. Dragging one onto the dock lit up the whole dock, tabs
included, and the drop put it back as an icon, so it seemed to vanish. The
drop zone now lights up the icon column for such panels (the whole dock still
for the tabbed ones), and the dropped panel pops out of its icon.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The panel laid out a row (with its thumbnail and several whole-document
lookups) for every open row each frame. A layer of 5,000 groups of 10 paths,
all open, took about 29 s a frame headless. Now the rows shown are listed once
per document change (with their layer colour and dimming worked out on the
way down) and ScrollArea::show_rows lays out only those in view: 0.4 ms a
frame. A row highlighted out of view is scrolled to.
The open rows move from UI state into the document's state
(DocState::layers_open, OpenRows): a document opens with only its top-level
layers open, and native files save the open rows (Document::layers_open,
written only when not the default, at save time like the view, so opening or
closing rows never marks the document modified).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pixel Preview only switched the pixel grid on from 600%: the art was still
rendered for the screen and drawn with linear filtering, so curves and
strokes stayed smooth vectors. Now, while a document pixel is bigger than a
screen pixel, the canvas renders the visible document pixels one per point
(anti-aliased by coverage), uploads them with nearest filtering and places
them over the document rect they cover, turning with a rotated view.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Free Transform's widget (Free Transform, Perspective Distort,
Constrain), the Properties panel's artboard editing (Artboard, Exit)
and Type › Insert Inline Symbol, found by the catalog completeness
tests after the rebase.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
These labels reach the screen through helpers that translate their
argument (dim_label, dropdown, tl!(CONST)), so the tl! literal scan
doesn't see them: the Libraries panel's empty state, Recolor Artwork's
1/2/3 Color Job presets, Spot Colors' CMYK Equivalents, the
Eyedropper's 3 x 3 / 5 x 5 Average, Print's PDF File destination and
Save PDF's CMYK profile in effect output intent.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
French now sits between Spanish and Italian (es, fr, it, ru): the
plural rule, the LANGUAGES registry entry (so the Language menu lists
Français before Italiano), the locale tests, the fr() helper and
french_reads_as_french. README, ROADMAP and docs/development.md list
the languages in the same order.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Add fr.tsv with the full interface coverage: every menu string, every
tl! literal, the plurals and the status/error messages (@msg).
Registered as complete_menus with the French plural rule (0 and 1 are
singular); every fr-* locale (fr-FR, fr-BE, fr-CA, fr-CH …) resolves
to it. Keeps the product, workspace and perspective preset names in
English like the other complete catalogs.
Tests: french_reads_as_french; fr added to KEEPS_MENU_NAMES and
COMPLETE_MESSAGES; the Latin-script glyph test covers French letters
and the no-break space; locale tests use de-DE as the unsupported case.
Clean-room: written from the meaning of the English labels in the
vocabulary French-speaking users of vector illustration software know
(Plan de travail, Nuancier, Contour, Fond, Tracé, Calque). No other
application's localisation was copied.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Character panel menu › Character Alignment gains ICF Top/Right and ICF Bottom/Left, and
`charAlign` takes `icfTop` / `icfBottom`: a character smaller than the largest on its line lines
up its ideographic character face's top (right, vertical) or bottom (left) with the big one's.
`FontFace::icf_margins` places the ICF inside the em box as the OpenType baseline tags define it
(https://learn.microsoft.com/en-us/typography/opentype/spec/baselinetags): `icfb` / `icft` of the
BASE table's horizontal and vertical axes against `ideo` / `idtp` (else the OS/2 typographic
descender and one em), for Han ideographs (else kana, else the first script). Without them, as that
page allows, the average ink box of some ideographs and kana; a face without ideographs uses its
em box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BFlat