After Object › Path › Remove Anchor Points the anchor that follows each
removed one is selected: round the end of a closed subpath, or the one
before it at an open subpath's end. Running the command again goes on
along the path, without picking each anchor first. Several anchors,
subpaths and paths each get their own next anchor; a path that goes
leaves nothing selected; one undo step restores the anchors and the
selection.
The Delete key still selects the remainder whole so a second Delete
removes it, and the Delete Anchor Point tool still leaves the path
selected whole.
Fixes#2241
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Unit fields and length strings read a percentage operand as a share of
a value. After * or /, the percentage scales the term before it:
3cm*50% is 1.5 cm and 3cm/50% is 6 cm. After + or -, it adds or takes
away that share of everything before it: 50pt+25% is 62.5 pt and
100pt+20pt-50% is 60 pt. Before this change these expressions read as
nothing, and the field kept its old value.
The parser now splits a sum at its last + or -, so a percentage applies
to the whole sum before it. Text without % gives the same values as
before, apart from float rounding. A percentage on its own (50%) still
reads as nothing, and percent and degree fields still read % as their
suffix.
Command length strings use the same parser: file.new's width and
height, the distance params and the length preferences.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
Store the registration point with the symbol and place instances so that point lands on (x, y). Symbol Options exposes the same 9-point control as Transform.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose existing Warp styles, orientation and percentage controls through the shared live effect dialog while preserving preview history and effect targets. Keep ordinary Enter owned by focused non-searchable combo controls.
Co-authored-by: Codex <noreply@openai.com>
Keep surviving drawable runs separate when Delete or Backspace removes an open-path anchor. Preserve appearance, selection and one-step Undo.
Co-authored-by: Codex <noreply@openai.com>
The Curvature tool built its curve as a uniform Catmull-Rom: both handles of a
smooth point a sixth of the chord between its neighbours, the ends of an open
path without handles. Uneven spacing overshot or looped, a J or U from three
points bent sharply at the middle with straight legs, and the end segments
looked flat.
- `curvature_spline` (draw2.rs) makes each stretch of three points follow the
circle through them: a smooth point's tangent is that circle's
(`smooth_handles`), each handle `chord / (3 cos²(α/2))` long, α between
handle and chord capped at 90° (`arc_handle`). The ends of an open path
mirror their neighbour's tangent in their chord (`end_handle`). A turn
tighter than 30° (`TIGHT_TURN`) shortens its handles, so a narrow V comes to
a point. Degenerate points become corners. `path.curvature` and the rubber
band use it.
- `catmull_rom` is unchanged for the Pencil and Paintbrush fitting.
- `bend_last` (from: smooth), `curvature_move` on a smooth point, the point
`curvature_insert` adds on a straight segment, and `path.convertAnchor` to
smooth without x/y (`curvature_smooth`) use the same rule.
- `curvature_extend` gives the new end its end handle unless Alt-clicked
(`corner` param on `path.curvatureEdit`).
- Neighbours of a point dragged on an existing path keep their tangents (a
Pen-drawn shape isn't reshaped); the path being drawn re-curves throughout.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
The Corner Radius field in the Properties and Transform panels has a
link toggle behind it (the "singleCornerRadius" preference, on by
default). When the link is on, one field sets every corner, as before.
When it is off, the panels show one field for each corner of a live
rectangle: Top Left, Top Right, Bottom Right and Bottom Left. Each field
sets its own corner through object.setLiveShape {corners, radius}.
This is the part of #1594 that does not change the corner widget drag
or its modifier keys, split out for review.
Tests: a Properties panel test (the link on shows one field; off shows
the four labelled fields with each corner's radius, in line and in
order). The new labels are translated in all 15 catalogs.
With Double Click To Isolate on, the Selection tool isolated groups only. A
double-click on a single path, compound path, image, mesh or placed file now
isolates it too, as the public documentation describes. Type still switches to
the Type tool; blends, envelopes, repeats and symbol instances keep their own
editing modes.
While a single object is isolated only it is hit, marqueed and taken by Select
All, new art goes beside it in its group or layer, and a double-click on the
empty canvas leaves with it selected. object.isolate accepts any object except
type.
Preferences › Appearance of Black › On Screen was stored and never read.
Display All Blacks Accurately (the default) shows pure CMYK black, black
ink alone at 100%, through the working CMYK profile, a dark grey, as the
canvas always did. Display All Blacks as Rich Black now shows it on the
canvas as RGB black: fills, strokes, type, gradient stops, effect colours
and pattern tiles, and in CMYK documents drawn by ink planes a pixel
whose inks come out as black ink alone. Rich blacks, black tints and
placed images show the same either way; exports and printing are
unchanged (Printing / Exporting is a separate option).
The renderer gets RenderOptions::rich_black, painted with a new
Ink::RichBlack (screen colours with pure black as RGB black) and applied
by ink::compose. The canvas sets it from blackOnScreen and keeps it in
its cache key, so changing the preference redraws.
A headless frame test reads the canvas raster: K100 shows its profile
grey by default, RGB black with rich, a rich black unchanged, and grey
again with accurate. A render test covers the opaque and ink-plane paths
and checks that rich blacks, tints and images don't change.
Docs: docs/mcp.md (blackOnScreen), docs/target-app-parity.md,
docs/gaps.md, docs/ui-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Transform Again kept only the last transform's matrix and its Copy
flag. After a Selection tool handle drag resized area type, Transform
Again scaled the type instead of resizing the type area again. After
Move, Rotate, Scale, Reflect or Shear with Transform Patterns set
differently from General › Transform Pattern Tiles, Transform Again
followed the preference, and after a scale whose strokes or corners
param differed from Scale Strokes & Effects or Scale Corners, it
followed those preferences. A recorded Transform Again played back
with the preferences in effect at playback, although its step records
the strokes, corners and patterns values it used.
last_transform now keeps the options with the matrix, as
last_perspective keeps the perspective.transform params.
apply_transform stores the copy, typeAreas and patterns values a
transform command used, and strokes and corners when it scales.
commit_interaction stores the params of a drag's last object.transform
preview with the values that preview noted. object.transformAgain
passes the options to the transform it repeats, and a true or false
value given in its own params under one of those names takes
precedence. A recorded step plays back with the values it records.
Three engine tests fail without the change: Transform Again after a
handle drag on area type, Transform Again after a Move with patterns:
false while Transform Pattern Tiles is on and after a Scale with
strokes: true while Scale Strokes & Effects is off, and a recorded
Transform Again played back with Transform Pattern Tiles on.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
