Path Precision Tools gains the Shared Edge Merge Tool, kept out of the
toolbars (All Tools drawer and Object › Plug-ins › Path Precision Tools,
no shortcut), and Keep Shared Points Together:
- Shared Edge Merge Tool (sharedEdge): over two paths touching at two
coincident anchors (tolerance 0 to 3 pt) hovering shows the two
stretches and the merged edge; a click replaces both with it, half way
between them, or following the upper (Shift) or lower (Alt) path. Both
paths stay closed or open, anchors either stretch has inside are
matched on the other, one undo step.
- Making ends: near anchors meet on a click and an anchor one path lacks
is added to match; Shift+Alt asks for this inside a stretch.
- Keep Shared Points Together: an option that makes Slide Anchor Along
Path, Extend Path and Set Anchor take coincident anchors along. Nothing
else in the app changes.
- Shared Edges section in the Anchor Inspector: brush diameter,
coincidence and the option.
- Commands addon.pathtools.mergeEdge and movePointsTogether, params
validated and covered by the command sweep.
- Cursor stand-in, catalog rows in every language, docs and tests.
Path Precision Tools gains two tools, kept out of the toolbars (All Tools
drawer and Object › Plug-ins › Path Precision Tools, no shortcuts):
- Corner Tool (cornerTool): editable corners on any path through the
existing Live Corners. Hover shows an eligible anchor, a click cuts a
corner with the tool's radius and kind, a drag sizes it (Shift: whole
values), a corner's marker selects it and loads its values, resizes it
and removes it at 0 or on a double-click; a corner never grows past
what fits; an Alt-marquee cuts every eligible anchor inside.
- Corners section in the Anchor Inspector: radius, kind, selected count,
Apply to Selected Anchors.
- Slide Anchor Along Path (slideAnchor): a drag runs an anchor along its
curve, the neighbouring segments refitted by the keep-shape kernel;
Shift snaps where the tangent is a multiple of 45° from the constrain
angle.
- Commands addon.pathtools.cornerSet, cornerRemove and slideAnchor, one
undo step each, params validated and covered by the command sweep.
- Cursor stand-ins, catalog rows in every language, docs and tests.
Path Precision Tools gains the Parametric Shape Tool: ten kinds of shape
(rectangle, ellipse, polygon, star, ring, arrow, cross, heart, gear,
speech bubble) that stay editable as numbers.
- Geometry in vectorcraft_pathops::addons::pathtools::shapes: each kind's
outline, corner rounding limited to the middle of a side, a fingerprint
of the outline, recovery of centre, size and rotation after a move,
turn or scale, and recognition of plain rectangles, ellipses and
regular polygons.
- The tool (parametricShape, All Tools drawer and Object › Plug-ins ›
Path Precision Tools only, no shortcut): drag from the centre (Shift:
45° steps), arrow keys change the count and values while dragging,
handles edit a selected shape, double-click places one.
- Commands addon.pathtools.shape.create / .set / .convert, one undo step
each; params checked (counts 3..1000, sizes up to 16384 pt).
- A shape keeps its numbers in one object-data entry (vc-pathtools-shape)
that SVG export already leaves out; anchor edits make it a plain path.
- Parametric Shape panel, cursor stand-in, catalog rows in all 25
languages, docs and tests.
A built-in add-on under Object › Plug-ins › Smart Pen:
- The Smart Pen Tool draws and edits Bézier paths without switching
tools: a click adds the next segment straight or curved (a panel
toggle; Tab flips the segment being placed or the last one), a drag
makes a smooth point (Alt breaks the handle, Shift snaps to 45°, Space
moves the point), a curve after a straight segment joins it tangent.
- On existing paths it selects and moves points, removes a point keeping
the shape (Alt-click), toggles smooth/corner (double-click), drags
handles, reshapes a segment by dragging it and inserts a point on it
(Alt-click); it closes, continues and joins open paths.
- The Smart Pen panel: next segment straight or curved, remove points
keeping shape, make smooth, make corner, retract handles, close or
join.
The tool stays out of both toolbars as shipped; the All Tools drawer
lists it under the add-on's heading. Commands are addon.pen.*; the
existing Pen tool, commands and menus are unchanged.
A built-in add-on under Object › Plug-ins › Path Precision Tools:
- Anchor Eraser Brush: painting over selected paths removes the anchors
under the brush that the outline can do without within a tolerance,
refitting the handles beside them (Alt ignores the tolerance, Cmd/Ctrl
deletes without refitting, pen pressure can scale the brush); one undo
step per stroke.
- Extend Path tool: dragging an end of an open path carries it on
straight, by stretching its last curve or along the circle it curves
on, or shortens it back along itself.
- Measure & Inspect tool: drag to measure distance and angle; hover a
path to read segment and path length, area, curvature, tangent and
anchor angles and handles, in the document's units.
- Anchor Inspector panel: the selected anchor's position and handles as
numbers, with Make Smooth (auto-smooth rule), Make Corner, Equalize
Handles, Remove Points Keep Shape, Add Points and three ways to close.
- Add Points at Crossings and Split at Crossings.
The tools stay out of both toolbars as shipped; the All Tools drawer
lists them under the add-on's heading. Commands are addon.pathtools.*;
the existing commands, tools and menus are unchanged.
Eraser Tool Options' Size takes Fixed or Pressure and a Variation as the
Blob Brush's does: the tool records the pen, and path.eraseRegion outlines
the squashed drag at the pen's widths, stretched back to the tip's angle
and roundness. The pressure parsing and outline move to draw2's common
helpers, shared by both commands.
Blob Brush Tool Options' Size takes Fixed or Pressure and a Variation, as
the brush options' Size does: with Pressure the brush is Size − Variation
wide where the pen presses lightest and Size + Variation where it presses
hardest. The tool records the pen pressure of each point and shows each
step of the drag as wide as the pen pressed there; path.blob takes
[x, y, pressure] points with sizeMode and sizeVariation and outlines the
stroke with that width profile. A stroke without pressure keeps the Size,
and Fixed with no variation stays the default.
https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html
A Pencil stroke always previewed as the path it draws, with its full
appearance: with a fill set, the fill flipped between the shape and its
inside-out as the stroke crossed itself or curved back, and hid the line
being drawn.
Pencil Tool Options get a Live preview checkbox, above Live curve
fitting, on by default and kept with the tool's other options
(`livePreview`, settings.rs). With it off, the stroke previews nothing
while it is drawn: a thin line follows the pen (the drag overlay the
Knife and Blob Brush already show), and the release, or a switch of
tool mid-stroke, draws the path with its fill and stroke, as one undo
step, as before. Escape still cancels the stroke. With it on nothing
changes. The Paintbrush has no such option and keeps previewing.
Public reference: Draw and edit paths using the Pencil tool,
https://helpx.adobe.com/illustrator/using/tool-techniques/pencil-tool.html
(lists Live preview and Live curve fitting among the Pencil's options).
The checkbox label is translated in all 24 catalogs.
Tests: pencil_with_live_preview_off_shows_a_thin_line_until_the_release
(tools), pencil_with_live_preview_off_draws_the_filled_path_on_release
(engine), and the freehand dialog test shows the checkbox for the Pencil
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pencil Tool Options has a Live curve fitting checkbox, on by default.
With it off, the path shown while a Pencil stroke is drawn joins the
stroke's points with straight segments, and the release fits the curve
at the Fidelity, as it does with the option on. Choosing another tool
while a stroke is drawn also keeps the stroke fitted. The option is
saved with the tool's other options.
path.freehand takes fit (true by default): with fit false, a new path,
a continued path and a redrawn section join the points with straight
segments.
Step 3 of the Rectangular Grid tool and Arc tool help pages
(https://helpx.adobe.com/illustrator/using/tool-techniques/rectangular-grid-tool.html,
https://helpx.adobe.com/illustrator/using/tool-techniques/arc-tool.html)
and the Tools page (https://helpx.adobe.com/illustrator/using/tools.html)
say a double-click on the tool opens its Tool Options. For these four tools
the double-click (tool.options, and Enter once #2891 lands) said the tool
had no options (#2691).
The Tool Options are the tool's click dialog in dialogs/shapes.rs, opened
without a place to draw (shapes::open_options; a `__toolOptions` field
marks it), as the review of #2979 asked: no copied form code. Its OK runs
tool.setOption and draws nothing; Cancel changes nothing. The grids' dialogs
are titled Rectangular Grid / Polar Grid Tool Options there. The options
are what the next drag draws with and what a click's dialog opens at:
- Line Segment: Length and Angle (now kept by the tool and used by the
click dialog) and Fill Line (new: shape.line {fill: true} gives the line
the current fill; the click dialog has it too);
- Arc: lengths, Reference Point, Type, Base Along, Slope, Fill Arc;
- the grids: dividers, skews and switches, plus the Default Size and
Reference Point, now kept by the tool (width, height, reference) for the
click dialog; a drag leaves them out of its command.
The grids' Reference Point is drawn only as the 9-point locator (it also
showed as a plain number field).
New strings (Rectangular Grid Tool Options, Polar Grid Tool Options, Fill
Line) have rows in all 24 catalogs.
Verification:
toolbar::tests::double_clicking_the_line_arc_and_grid_tools_opens_their_tool_options
double-clicks each tool's toolbar button: the dialog and its title, Cancel
leaves the next drag as it was, OK draws nothing, the next drag uses the
option and a click's dialog opens at it (a grid at its Default Size);
line_segment_options_and_fill_line, grid_default_size_is_an_option_the_drag_leaves_out,
fill_line_gives_a_new_line_the_current_fill. Grid dialog tests now expect
the stored Default Size. Live: double-clicking the Rectangular Grid tool in
the release build opens Rectangular Grid Tool Options; OK with 2 and 3
dividers, then a drag, draws a 3 × 4 grid.
Replace length/angle with Length X/Y, reference point, Type, Base Along, Slope and Fill Arc; extend geom and shape.arc params.
Co-authored-by: nrq6993-a11y <nrq6993-a11y@users.noreply.github.com>
Double-clicking the Shape Builder tool reported that the tool has no
options. The reference app opens Shape Builder Tool Options there.
The dialog sets Consider Open Filled Paths as Closed, Pick Color From
(Artwork or Color Swatches), Cursor Swatch Preview, Selection (Freeform
or Straight Line) and Highlight Fill. The defaults keep today's
behavior. With Consider Open Filled Paths as Closed off, a filled open
path cuts regions as an unfilled one does. With Color Swatches, a merge
fills the new shape with the current fill, and the Left and Right arrow
keys step the current fill through the document's color swatches.
Cursor Swatch Preview shows the current fill and the swatches before
and after it above the pointer. With Straight Line, a drag merges what
the line from its first point to its last crosses. With Highlight Fill
off, merge mode shades no regions.
The options persist like other tools' options. shapeBuilder.merge
takes openFilledAsClosed and pickColorFrom, and shapeBuilder.regions
takes openFilledAsClosed. Gap Detection, "In Merge Mode, Clicking
Stroke Splits the Path" and Highlight Stroke When Editable are not part
of this change.
Docs: docs/mcp.md, docs/target-app-parity.md.
Double-clicking the Live Paint Selection tool did nothing, and the tool
always selected faces and edges and highlighted them in red at 4 px.
It now opens Live Paint Selection Tool Options with Select Fills,
Select Strokes, Color and Width, the options the reference app's help
page on selecting objects lists.
- With Select Fills off, a click selects the edge nearest the pointer,
as Alt-click does. With Select Strokes off, Alt-click selects the
face under the pointer, as a click does. With both off, a click
selects no face or edge.
- Color (a layer color or a custom color) and Width (1 to 20 px) set
the highlight on the face or edge under the pointer.
- The defaults are the earlier behavior: both selections on, red
(#ff2a2a) and 4 px. The options are tool options (tool.setOption
{tool: "livePaintSelection"}): they last across tool switches and
are saved with the preferences.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Blob Brush stroke merged with every touching closed path of its
color that had no stroke, and the blob it drew or merged into was
always left selected. The Blob Brush Tool Options had Size only.
The Blob Brush Tool Options now have Keep selected and Merge only
with selection, both off by default. A blob that a stroke draws or
merges into is no longer left selected unless Keep selected is on,
and the rest of the selection stays as it was. While Merge only with
selection is on, a stroke merges only with selected blobs, and with
nothing selected it draws a new blob. The options persist like the
tool's Size, and path.blob takes keepSelected and mergeOnlySelection,
both false by default. Keep selected stays on by default for the
Pencil and Paintbrush.
Docs: docs/target-app-parity.md, docs/control-protocol.md.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
Double-clicking a tool's button (or tool.options {tool}) now also opens:
- Artboard tool: Artboard Options of the active artboard (the Artboard
tool's while it is in use, else the window's);
- the graph tools: Graph Type for the selected graph (an error without
one), the dialog Object > Graph > Type opens;
- the Symbolism tools: Symbolism Tools Options with the brush the eight
tools share (Diameter, Intensity, Symbol Set Density);
- Magic Wand: the Magic Wand panel.
The Object > Graph dialogs' opener is shared with the toolbar. The new
labels are translated in the eight complete catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Flare tool keeps its options (Center: Diameter, Opacity, Brightness;
Halo: Growth, Fuzziness; Rays: on/off, Number, Longest, Fuzziness; Rings:
on/off, Path, Number, Largest, Direction) as persistent tool options,
saved with the preferences. The next flare dragged out uses them (the drag
still sets the centre and diameter, and Up/Down the ray count), a click
with the tool opens them filled in, and double-clicking the tool (or
tool.options {tool: "flare"}) opens them to edit: OK keeps them and draws
nothing. Before, the click dialog was the generic parameter form with
fixed defaults and the drag always used the command's defaults.
The new Flare Tool Options dialog lays the four groups out in two
columns; Rays and Rings have their checkboxes, and every value is kept
within its range. Its labels are translated in the eight complete
catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`artboard.setProps {scaleArt: true}` maps the art fully inside a resized
artboard (as Move Artwork with Artboard gathers it) and its artboard guides
from the old rectangle onto the new one, each side by its own ratio, in one
undo step, and returns the ids scaled. Strokes, effects and corners follow
Scale Strokes & Effects and Scale Corners (`strokes`, `corners`), pattern tiles
Transform Pattern Tiles (`patterns`); locked and hidden art follows
`lockedAndHidden` (default: prefs moveLockedWithArtboard). The resolved choices
are journaled, so a replay scales the same objects the same way. A move that
keeps the size scales nothing.
The Artboard tool's `scaleArt` option (saved with `moveArt`) makes handle
drags proportional, as the public help describes, keeps them proportional at
the 1 pt minimum, and leaves the scaled art out of the Smart Guide targets.
Move and Scale Artwork with Artboard are check boxes in the Control bar and
Properties' Edit Artboards; the artboard size fields there and in the
Transform panel pass the option. Translated in the eight catalogs that have
Move Artwork with Artboard. docs/mcp.md and the ROADMAP updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking a Liquify tool opens its Tool Options (dialog liquifyOptions):
the shared Global Brush Dimensions (Width, Height, Angle, Intensity, Use
Pressure Pen), the tool's options (Detail, Simplify with its checkbox, Twirl
Rate, Complexity, Brush Affects, Horizontal/Vertical) and Show Brush Size.
The canvas captures pen pressure from pen/touch force, ui.pointer and MCP
pointer events take `pressure`, and object.liquify takes [x, y, pressure].
Fixes: LiquifyParams::to_json now sends affectAnchors/In/Out; Alt-drag sizes
the brush from its current size (Shift keeps proportions) instead of
collapsing it. Hint-bar text for the seven tools. Registers the MCP Liquify
tests file added in M8.2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each tool keeps its options (a table in vectorcraft_tools::settings) when another
tool is chosen, across document switches, and in the saved preferences
(Prefs::tool_settings). The 7 Liquify tools share one set of Global Brush
Dimensions; the Symbolism tools share their brush. tool.setOption takes
{values} and a `tool` (another tool's options are stored for later), returns
the options, and works headless (MCP host command).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic