Each swatch or graphic style library now opens in a panel of its own,
`library:<kind>:<library id>`, in the shared docking system: several can be open
at once, and they float, group as tabs, dock and close like any panel.
Opening a library that is open brings its panel forward; Previous / Next
Library show the neighbouring library in the same panel.
The library panel menu gains Persistent. The panels' view, Show Find Field
and Persistent are kept in the UI preferences (`library_panels`); at startup
the persistent panels reopen where the saved layout had them, a library
loaded from a file read again from its path (a missing file is skipped with
a status-bar note). `ui.libraryPanel {panel, library?, view?, showFind?,
persistent?}` reaches all of it; docs/mcp.md documents the panels.
Install Plug-in (plugin.install) now keeps the plug-in's module in a
Plug-ins folder next to the preferences, as Illustrator keeps plug-ins in
its Plug-ins folder, and the desktop app and vectorcraft-cli install the
ones there at startup (a module that doesn't load is skipped with a log
record, at most 512 MB are read). Remove Plug-in deletes it from the
folder. The Additional Plug-ins Folder preference is still loaded from
where it is. Confined MCP servers and VECTORCRAFT_NO_PREFS keep nothing,
as with the PDF preset and colour profile stores.
Docs: docs/mcp.md, docs/plugins.md, docs/target-app-parity.md.
Print and Print Preview name the area type and type on a path that
prints without the text past the end of its frame (#2308). The exports
that draw type gave no such warning: a PDF, EPS, SVG, EMF, WMF or
raster export of a frame too small for its text answered with no
warning about it.
These exports now add the same warning, with "isn't drawn in the
export" in place of "doesn't print". Each export counts the visible
objects that it draws. Those are the objects on the pages or artboards
it writes, or all of them in an EPS of the visible art and in an SVG
without chosen artboards. A PDF leaves out layers that don't print
unless includeNonPrinting or createLayers is set. The objects are found
with the walk that fonts::printed_type runs for Print, and typecmd.rs
builds the message with the code that builds Print's. A .ai file keeps
the whole text in its editing data and gives no warning.
Docs: docs/mcp.md (Fitting area type), docs/target-app-parity.md.
With View > Guides > Lock Guides on, Session::select drops the paths
made into guides from the selection (#1534), but commands that set the
selection another way skipped that filter and left a locked guide
selected, so the next move moved it. object.exitIsolation selected an
isolated guide path. Undo, Redo, a canceled undo group, a canceled
drag or dialog preview and a failed command.batch brought back locked
guide paths and ruler guides in the selection. Unlock All, Show All
and Paste selected the guide paths they unlocked, showed or pasted.
Locking the guides deselected them in the active document only.
The filter is now deselect_guides, which also clears the selected
ruler guides. Session::select and Session::edit run it while Lock
Guides is on, and so do object.exitIsolation, Undo, Redo,
Session::cancel_interaction, a canceled undo group and a failed batch.
Locking the guides deselects them in every open document. With Lock
Guides off, the selection is set as before.
Docs: docs/mcp.md.
Nothing locked the variables: any command or panel button could delete
or rename a variable that scripts and data sets name.
variable.lock {locked?} (Lock Variables: a lock button in the Variables
panel's bottom bar and an item in its menu) sets a flag that is saved
with the document. Without `locked` it toggles, and a change is one
undo step. While the flag is set, variable.define, variable.delete,
variable.rename and the four variable.make…Dynamic commands are refused
with "variables are locked", and the panel disables New Variable…,
Variable Options…, Delete Variable and Make … Dynamic. Binding,
unbinding and the dataset commands still run. variable.list
reports `locked`. A file without the flag opens unlocked.
Docs: docs/mcp.md, docs/target-app-parity.md.
Rearrange and Select › All on Active Artboard measured a symbol
instance as its transform applied to the 20 × 20 square around the
symbol's origin, not by the symbol's art. An instance whose art lies
away from that square moved with, or was selected on, the artboard
the square was on. Convert to Artboards, Transform Each, Lock and
Hide › All Artwork Above, Paste and Place from Library at a point,
and the clipboard imports measured the instance the same way, as did
Copy and Cut when they recorded the source artboard and library.add
when it sized a graphic.
These commands now measure an instance by its art through
Document::symbol_boxes, as Document::art_on_artboard, Fit to Artwork
Bounds and the Align commands do. Clipboard::bounds measures with the
symbols the clipboard holds. clipboard.exportPng, clipboard.exportPdf
and the PNG and PDF that Copy offers other apps are now cropped to
the instance's art.
Docs: docs/mcp.md.
dataset.select skipped every bound object inside a hidden layer or
group. Type on a hidden layer kept the previous row's text, which
showed when the layer was shown again, and dataset.list and the
Variables panel reported every row as matching that type while the
layer stayed hidden.
dataset.select, dataset.next and dataset.prev now rewrite type and
apply the other values on hidden objects and inside hidden layers and
groups. Those objects stay hidden unless a visibility value shows
them. Objects that are locked or inside a locked layer or group are
still skipped and counted in `skipped`. dataset.list, dataset.capture
and dataset.update read hidden objects as well. Binding still refuses
art inside a hidden layer or group.
The values now go in the order the variables are defined. The passes
that applied visibility values before and after the other values are
removed.
Docs: docs/mcp.md, docs/target-app-parity.md.
A two-finger rotation on a Mac trackpad did not turn the view. With
the new General preference Trackpad Gesture to Rotate View
(`trackpadRotateView`, on by default) and the pointer over the canvas,
the rotation turns the view about the pointer, keeping the document
point under it in place. The view does not turn until the rotation
reaches 5°; it then turns by the whole rotation and follows each later
rotation event. A rotation ends 0.25 s after its last event. A rotation
in the same frame as a pinch zooms and turns about the same point.
egui reports the gesture as `Event::Rotate`: egui-winit makes it from
winit's macOS rotation gesture, and eframe makes it from Safari's
gesture events in the web build. Rotation events that arrive while
fingers are on a touch screen do not turn the view. With the
preference off, the gesture does not turn the view.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/hardware-parity.md.
Object > Rasterize, Crop Image, Flatten Transparency, Expand
Appearance of raster effects and Vector Halftone draw the art with the
renderer and replace it with the result. When the art held an image
that could not be decoded, the renderer drew nothing for it, and the
result lacked the image with no message. A raster export of the same
art warns that "an image couldn't be decoded and is missing from the
picture".
These five commands now compare decode_failures before and after they
draw, as raster exports do, and their replies carry that text as
`warning`. They still make their result in one undo step. The app
shows a command's `warning` in the status bar: after a menu command,
after OK in a dialog with a preview, and after a tool runs a command
(Crop Image's Apply).
Docs: docs/mcp.md (Flatten Transparency, Expand Appearance, Document
Raster Effects Settings, Vector halftone).
file.new takes a width and height up to 163,830 pt, 1 to 1,000
artboards, a spacing of 0 to 100,000 pt and a bleed of 0 to 72 pt a
side, but a saved or Recent New Document preset in the preferences
was read as it was stored. With a width of -5, file.new failed with
"width/height must be positive and within the canvas"; a spacing of
-50 overlapped the artboards, a preset with 5,000 artboards made 5,000
artboards, and a bleed of 100 reached the document. A .vectorcraft
file's Document Setup bleed, superscript and subscript proportions and
small caps size also opened as stored, and document.setup then failed
when its own report was passed back to it.
These values are now read as the nearer end of the range their
setter takes, and an artboard width or height of 0 or less is read as
1 pt. Presets and files with values in range read as before.
Docs: docs/mcp.md (Document Setup, New Document).
object.createObjectMosaic read columns and rows with as_u64 and fell
back to 10 for anything else, so 2.5, -3 or "4" made a 10 x 10 mosaic
and reported success. Transform Each read reference and seed the same
way (a reference of 2.5 used the center point, and a seed of 7.5 used
the default seed), and Rearrange All Artboards cut 1.5 columns to 1
and read "1" as the default 2.
These five parameters now take a whole number, written 4 or 4.0 as the
Rearrange All Artboards dialog sends it. A fraction or a negative
number is refused with "`columns` must be a whole number", the message
object.slice.divide gives. A string or another value that is not a
number is refused with the check_numbers error. The command then
changes nothing. The existing ranges stay: 1 to 1000 mosaic tiles
across and down, a reference of at most 8, and 1 to the artboard
count of columns.
Docs: docs/mcp.md, docs/target-app-parity.md.
In a CMYK document, an RGB color from the Eyedropper, a hex value or
paint.setFill was stored as CMYK by the profile-free formula
(k = 1 - max(r, g, b)), not through the color settings. RGB 83/170/223
came in as C63 M24 Y0 K13. A CMYK image was sampled through the RGB its
decoder shows, so its inks came back only when the formula happened to
round-trip them.
paint_from now converts an RGB color into a CMYK document with
Cms::convert and the settings' intent, as Document Color Mode and Swatch
Options already do. This covers paint.setFill and paint.setStroke,
gradient stops, swatch.new {color} and the Eyedropper. With Generic CMYK,
83/170/223 now separates to C59 M12 Y3 K0, and #ff0000 now separates to
C0 M97 Y100 K0 instead of C0 M100 Y100 K0. keepModel: true still keeps
RGB. paint.sampleColor with a stop stores the color the same way.
The Eyedropper samples a CMYK image's ink amounts (a four-component
JPEG, or an 8- or 16-bit chunky CMYK TIFF) and returns them unchanged
(ImageBlob::sample_cmyk_object), also in an RGB document. It takes an
RGB image's sRGB pixel into the working RGB space, as the screen color
sampler does, so the picked color shows as the pixel when the working
space is not sRGB.
Docs: docs/mcp.md, docs/target-app-parity.md.
View › Rulers › Change to Global Rulers (Cmd+Alt+R) was a disabled
stub: the rulers always counted from one document zero point. The
reference app's public help describes two modes: artboard rulers, the
default, count from the active artboard's top-left corner, and each
artboard can have its own zero point; global rulers keep one zero point
for the whole document whichever artboard is active.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/about-rulers.htmlhttps://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/use-rulers.html
`view.globalRulers {global?}` switches the mode (toggle by default),
undoable and saved with the document (`rulers`). The menu item reads
Change to Artboard Rulers while global rulers are on. A new document has
artboard rulers; a file saved before the mode existed has no `rulers`
key and opens with global rulers, so it measures as it did.
With artboard rulers, dragging the ruler corner sets the active
artboard's zero point, kept as an offset from its corner
(`artboard_ruler_origins`, by artboard id) so it moves with the
artboard, and double-clicking the corner resets it. The global zero
point (`ruler_origin`) stays separate. `document.rulerOrigin`,
`document.setRulerOrigin` and `document.resetRulerOrigin` take
`artboard`; `Document::ruler_origin_for` is the zero point with an
artboard active, falling back to the corner or the global one when a
stored value is out of range.
The rulers, the Transform, Properties and Control bar X/Y, the Info
panel's X/Y (which ignored the zero point before), ruler-guide
readouts and Shift ruler-tick snapping all count from that zero point:
the view's active artboard reaches the tools through `ViewInfo` and
`ToolContext::ruler_origin`. Command coordinates stay absolute.
Tests: engine/tests/ruler_origin.rs (default mode, per-artboard origin
following its artboard, global origin apart, toggle and undo, save and
legacy files, out-of-range values), ui-egui/src/tests_ruler_origin.rs
(position fields and corner drag on the active artboard, menu label and
shortcut), tools/src/rulerguide.rs (guide readouts and tick snapping).
Tests written for the single global zero point now turn global rulers
on first. "Change to Artboard Rulers" is translated in every catalog.
Docs: docs/ui-parity.md, docs/gaps.md (G7), docs/target-app-parity.md,
docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01U2JbUtM4MkzWLm9FgYiEsq
Object › Graph › Column… was a menu stub, so a graph's columns and bars
were always plain rectangles. The reference app fills them with a graph
design, vertically scaled, uniformly scaled, repeated with a value for
each copy, or stretched at a guide line.
graph.column (Column…) draws the columns, bars or stacked segments and
the legend swatch of the series picked with Group Selection with a
design saved by Object › Graph › Design. Vertically Scaled stretches the
design to each column's length at the column's width. Uniformly Scaled
scales it both ways to that length and centers it on the column.
Repeating stacks a copy for each Each Design Represents value out from
the zero line, and For Fractions chops the last copy at the value or
scales it down. Sliding keeps the part above the design's horizontal
guide line in proportion and stretches the part below. The design and
its options are saved with the graph, and the graph follows the design
when it is renamed or deleted. Columns drawn with a design cast no drop
shadow.
A marker or legend design made of one path is now drawn in a group of
its own. Painting a series with Group Selection then leaves the design's
paint alone, as it already did for designs of several objects.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object > Live Paint > Gap Options was a stub, and paint leaked through
any gap between the paths of a Live Paint group. The reference app's
Gap Options stop paint at small gaps, close them with unpainted paths
and preview them on the canvas.
livePaint.gapOptions (Gap Options) sets a group's options: detect (Gap
Detection), size (small 3 pt, medium 6 pt, large 12 pt, or a custom
size over 0 up to 72 pt), color (the Gap Preview Color, #rrggbb or a
layer color's name) and closeGaps, which adds an unpainted path across
each gap to the group's paths. A gap runs from a loose end of a path
to the nearest point of any path within the size, unless the paths
already join the two close by. With detection on, the faces are made
again as if a line closed each gap, and each face or edge keeps the
look of the old one it lies in or on. The options are stored on the
group, so they are saved, copied and undone with it, and Expand drops
them. Merge keeps the bottom group's options when its Gap Detection is
on, or else turns Gap Detection on with Small when another merged
group has it on. When Gap Detection is off in every merged group,
Merge keeps it off. livePaint.info lists the options and the gaps up
to the size wide that no path closes.
The menu item opens a Gap Options dialog. With Preview on, the options
apply live and the gaps show on the canvas in the preview color, and
OK keeps them as one undo step. vectorcraft-pathops gains find_gaps
and live_paint_with_gaps.
Docs: docs/mcp.md, docs/target-app-parity.md.
i18n: the 19 complete catalogs have rows for the dialog's labels, and
bg's Gap Options menu label now names gaps instead of line spacing.
Window › SVG Interactivity was a disabled menu item. VectorCraft could
not attach JavaScript to an object's events or link JavaScript files
for SVG export.
The SVG Interactivity panel lists 19 events, from onfocusin to
onscroll. Pick one, type its JavaScript and press Enter to add it to
the selected objects; the list shows their events. Remove Selected
Entry removes the picked event, and the panel menu's Clear Events
removes all of them. Link JavaScript Files… opens the JavaScript
Files dialog, which adds a path or URL to the document's list and
removes the selected one. Its Choose… button puts a picked file in
as a file:/// URL. The commands are svgInteractivity.info,
setEvent, removeEvent, clearEvents, addFile and removeFile, and
ui.javascriptFilesDialog. Each edit is one undo step. A document
links at most 64 files.
SVG export writes each event as an event attribute on the object's
element and each file as a <script xlink:href> element. With the SVG
Tiny 1.2 profile, export leaves the events out with a warning. SVG
import reads the listed event attributes and the script links back
as text. It never reads a linked file or runs a script, and it leaves
inline scripts and the links after the first 64 out with a warning.
The native format keeps both.
An unnamed <g> with data-* attributes of its own around a single
object now imports as a group. Before, import folded it into the
object, which then took the group's data-* or, when it had its own,
dropped the group's. An unnamed <g> with event attributes stays a
group in the same way. The SVG import fuzz tests now include event
attributes and <script> elements.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
docs/ui-parity.md.
An Alt-click (Option-click on macOS) on the Artboards panel's New
Artboard used to add an artboard at once, as a plain click does. It now
opens Artboard Options for the new artboard, filled in with the name and
size that artboard.new {} would give it, and adds nothing yet. OK adds
the artboard with the fields where artboard.new {} would place it (20 pt
to the right of the last artboard) in one undo step, and makes it the
active artboard; Cancel adds no artboard. A plain click and a row
dropped on the button work as before.
The new UI command ui.newArtboard ("New Artboard Options…") opens the
dialog. It is listed after ui.newLayer, and its label has a row in each
catalog.
Docs: docs/mcp.md, docs/target-app-parity.md.
Type › Optical Margin Alignment was a disabled menu item. The reference
app's Optical Margin Alignment hangs Roman punctuation and the edges of
letters such as W and A outside the margins of every paragraph of a
type object.
type.opticalMarginAlignment (Type › Optical Margin Alignment) turns it
on or off for the selected type in one undo step, and the menu item is
checked while the type has it on. In every left-to-right paragraph of
point and area type, quotation marks, hyphens, full stops and commas at
a line's start or end hang wholly outside the margin there. Asterisks,
tildes, ellipses, en and em dashes, colons and semicolons hang by half
their width, and A, V, W, Y, v, w and y hang by a tenth of theirs. A
punctuation mark followed by a quotation mark hangs with it.
Left-aligned lines hang at their left margin, right-aligned lines hang
at their right margin, and centered and justified lines hang at both.
Lines break where they did before, and the space that justification
adds between glyphs leaves out the gaps next to a hanging punctuation
mark.
The setting is off for new type and for documents from before it, and
the type object saves it only when it is on.
The Type menu's checks for Optical Margin Alignment, Type Orientation
and the Type on a Path effects now read the type inside a selected
group, as the commands do.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Object > Expand with Fill expanded gradient fills only. A pattern fill
stayed a live pattern, and object.expand.info did not report it, so the
dialog's Fill option was disabled for it. In the reference app, Expand
with Fill turns a pattern fill into the pattern's tiles, and the shape
becomes their clipping mask.
The Fill step now turns each visible pattern fill of a path or compound
path into a clip group shaped like the object, holding the tiles the
pattern lays over the object's box with fresh ids. The group isolates
the tiles' blending and takes the fill's opacity, blend mode and other
effects. Geometry effects of the fill or the object, such as Offset
Path, shape the group's outline and the box the tiles cover. A path in
the tile art with a random Transform effect is baked with its own id
first, and a path with a brush that varies at random (calligraphic or
scatter with Random variation, or bristle) is baked where the pattern
defines it first, so every tile matches the canvas. The object's other
fills and strokes stay on copies of it in paint order, and Expand stays
one undo step. Type with a pattern fill expands the same way once
Object outlines it, and object.expand.info reports pattern fills under
fill. It also reports gradient fills under a new gradient key, and the
dialog enables Expand Gradient To only when the selection has one. A
pattern fill stays as it is when it lays no tiles over the box, when a
group or type in its art has a random Transform effect, when the
pattern is scaled, rotated, reflected, stretched or sheared and its art
holds a symbol instance, and when the pattern is rotated, reflected,
stretched or sheared, or scaled while its art has geometry effects, and
its art has raster or 3D effects, or a geometry effect on a group or
type.
PatternDef gains instances_in_with, which places the tiles with a given
Scaling. Expand has stroke weights, effect distances and the tiles' own
pattern paints scale with the pattern's transform. When the pattern is
rotated, reflected, stretched or sheared, or scaled while its art has
geometry effects such as Roughen, the strokes and geometry effects of
the tiles' paths become filled art first (bake_appearance, and Outline
Stroke's conversion for brushed strokes), and their live shapes become
plain paths, in their opacity masks too. Tiles place their opacity
masks with them, unlinked ones included (place_art), which also fixes
unlinked masks in pattern tiles in PDF, EPS, EMF and WMF export and in
Distort Pattern Fills.
Faults in the shared code are fixed for every caller. assemble
dropped the effects of a sole part, so Expand lost a lone gradient
fill's own effects and Outline Stroke lost those of a stroke with a
gradient along or across it. Outline Stroke also dropped a brushed
stroke's raster effects from its brush art. Expand replaced an object
whose gradient fill could not be expanded with a plain copy; it now
leaves it as it was. Expand left the geometry effects of a gradient
fill, and with Object off those of the object, on the expanded art,
where they reshaped every strip; they now shape the clip group's
outline, and the gradient fits it, as for pattern fills.
bake_appearance dropped a stroke's raster effects from its filled
outline and filled the outline of a stroke with a gradient along or
across it with a gradient across the outline's box; it now keeps the
effects and makes the gradient meshes clipped to the outline, as
Outline Stroke does. Envelope Options > Distort Appearance uses it too.
PatternDef::offsets_covering overflowed on a region too large to count
in integers, as for a pattern scaled by 1e-20; it now gives no offsets.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md.
The toolbar listed the Touch Type tool (Shift+T), but choosing it did
nothing. The reference app's Touch Type tool moves, scales and rotates
one character of live type by dragging the handles of a box around it.
A click with the tool now selects one character and shows a box around
it. Dragging the box or its lower-left handle moves the character along
its line and up or down. The upper-left handle scales it vertically,
the lower-right handle scales it horizontally, the upper-right handle
scales it proportionally, and the upper-middle handle rotates it. A
character rotated by up to about 84 degrees follows the pointer too.
Near a quarter turn, a drag moves it only along its line. Escape
cancels a drag, and otherwise lets go of the character.
Each drag is one text.touchType command and one undo step. It sets the
character's baseline shift, scales and rotation, and moves it along its
line by changing its own kerning and the kerning of the character
before it, within the kerning range. The characters after it stay
where they are. Where the font kerned the character with its
neighbors, the two kerning values also keep the character in place
when it is only raised, scaled or rotated. The characters after it
stay where they were, or move by the change in its width when it is
scaled. The first character of a line and a right-to-left character
move only up and down. The type stays editable.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
File > Place read text files only as plain `.txt`, and an RTF file
could not be placed. The reference app lists RTF among the formats it
places as text, keeping the file's font and style settings.
File > Place now reads RTF files, written from the Rich Text Format
Specification 1.9.1, and sets their text as area type the way a text
file is placed. Each run keeps its font from the font table, its size,
bold and italic, underline, strikethrough, all caps, small caps,
superscript or subscript (in Document Setup's proportions), baseline
shift and its color from the color table. Each paragraph keeps its
alignment, left, right and first-line indents, space before and after,
and direction. Table cells are separated by tabs and each table row is
a paragraph. Unicode characters, Windows-1252 and Mac Roman bytes and
the special-character control words are read, and of a \upr group's
ANSI and Unicode text, the Unicode text is read. Hidden text, pictures,
objects, headers, footers, notes, field instructions and other
destinations are left out, and unknown control words are skipped.
A file is read as RTF when it starts with {\rtf, whatever its name,
except a .txt file, which stays plain text. RTF files share the 4 MiB
limit of text files. Groups nested more than 512 deep share the
formatting of the deepest one read, the font and color tables keep at
most 4,096 entries, and a file with more than 100,000 paragraphs or
runs is refused. The Place dialog lists RTF files, and file.place,
file.place.info and file.place.queue report the format `rtf`.
The tests in tests_textimport.rs fail without the change, and
text_import_fuzz.rs places random RTF token streams.
Docs: docs/file-format-parity.md, docs/mcp.md,
docs/target-app-parity.md.
A Shift-click or Ctrl/Cmd-click on a brush in the Brushes panel used to
apply the brush, as a plain click does. It now selects brushes without
applying one. Shift-click adds the brushes from the last brush clicked
without Shift (else the highlighted brush) to the clicked one, in the
order the panel shows them. Ctrl/Cmd-click adds the clicked brush to the
highlighted brushes or removes it. The panel highlights the selected
brushes, and the bottom bar's Delete Brush and the panel menu's
Duplicate Brush and Delete Brush act on all of them. A plain click
works as before and ends the multi-selection, and so does selecting
other art, another document or another current brush.
brush.delete and brush.duplicate also take {names: [name...]}. Each
call is one undo step, and an unknown name fails before anything
changes. brush.duplicate answers {names} for a names list.
Docs: docs/mcp.md, docs/target-app-parity.md.
A .ai or EPS opened from its editing data lost the opacity and blend
mode of its text objects. text_slot made the slot without the graphics
state's opacity and blend mode, which paths, meshes and images take, so
an Xy before a text object was lost. An Xy after it reached the slot,
but fill_slots then put type made from the text document in the slot's
place with only its visibility and name, and style_marker dropped the
transparency that a text object with an appearance carries on its look.
text_slot now takes the state's opacity and blend mode. fill_slots
gives made type the slot's opacity, blend mode, isolation and knockout.
The page's type gets them too, in place of its own transparency when
that is none, the slot's, or the slot's combined with that of the
objects around it; otherwise the page's type and the strokes around it
keep their own (a fill's, for example). When the type has transparency
and comes with other art (the strokes the page draws around it, or page
type that goes with it), a group of them takes the transparency. A text
object with an appearance takes the transparency from its look; where
the look draws more than the type and has transparency, the look and
the type go into a group that has it, and that group is not taken as
the look of a later object. The import fuzz's .ai tokens now include a
commented text object, 1 /FreeUndo , and a group's state marker
(6 () XW).
Docs: docs/mcp.md, docs/target-app-parity.md.
Shift pressed while dragging a segment had no effect on the curve:
Direct Selection's curved-segment and spine-segment drags, the Anchor
Point tool and the Pen with Alt sent the pointer offset alone, and the
segment bent freely. The reference app keeps the handles in the
perpendicular direction and of equal length while Shift is held.
path.reshapeSegment and object.blend.spine.reshapeSegment take
perpendicular (default false, which keeps today's behavior). With it,
both of the segment's handles stand at right angles to the line between
its anchors, on the same side and at the same length, and the point at
t lies as far from that line as the moved point does. A smooth anchor
at either end stays smooth, as it does in a drag without perpendicular,
and a segment whose anchors coincide bends as it does without
perpendicular. With Direct Selection, Shift pressed once a curved
segment's drag has started sends perpendicular; Shift held at the press
still toggles the path's selection, as before. Direct Selection's
spine-segment drag and the Anchor Point tool's segment drag send Shift
as perpendicular too, so the Pen with Alt does as well. A straight
segment dragged with Direct Selection already moves at 45° steps with
Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The EPS reader read PostScript by any name, but the Open and Place
dialogs hid .ps and .epsf files, and a .ps or .epsf file whose header
is only %! could not be opened or placed ("not a format VectorCraft
reads"). The reference app lists .eps, .epsf and .ps under Open and
Place.
- A read-only PostScript format (ps) joins the format table. A .ps
file opens and places through the EPS reader and reports the
ps format. document.export does not write .ps; file.print does.
- .epsf is an EPS extension.
- OPEN_EXTS and PLACE_EXTS list epsf and ps, so the dialogs, the CLI
help and the MCP open_file description list them.
UNASSOCIATED_EXTS lists them too: the macOS bundle declares neither.
- A .ps or .epsf file whose header is only %! now pastes as EPS when
copied in a file manager, as one with a %!PS header already did, and
clipboard.importEps reads PostScript whose header is only %!, which
it rejected before.
Docs: docs/mcp.md, docs/file-format-parity.md (.ps row),
docs/target-app-parity.md.
A double-click on a ruler guide with the Selection, Direct Selection or
Group Selection tool did nothing, whatever keys were held. A guide could
be released only with View › Guides › Release Guides.
With the Selection, Direct Selection or Group Selection tool, a
double-click with Cmd/Ctrl and Shift held now runs view.guides.release
on the ruler guide under the pointer (index) or, when no ruler guide
is there, on the guide path under it (ids). Nothing is released while
guides are hidden or locked, and a double-click without both keys does
what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Layers panel menu had no saved-selection items, and the Select
menu was the only menu that listed saved selections. The reference
app's help also names a Save Selection menu in the Layers panel that
lists the saved selections and holds Save Selection, Update Selection
and Edit Selection.
The Layers panel menu now has a Save Selection submenu after Locate
Object. It holds Save Selection…, Update Selection and Edit Selection…,
which are enabled and run as in the Select menu, and below them the
active document's saved selections. Choosing a name runs select.recall
with that name, as the Select menu's list does.
Docs: docs/mcp.md, docs/target-app-parity.md.
With several artboards selected, the Artboards panel menu's Duplicate
Artboards copied only the active one, and Copy and Cut with the
Artboard tool took only the tool's active artboard.
artboard.duplicate, artboard.copy and artboard.cut now take `indices`,
and without `index` or `indices` they act on the artboards the
Artboard tool has selected. Duplicate Artboards passes the selected
artboards and selects the copies. Duplicate and Cut are one undo step
each, and Paste adds every copied artboard back, with its art, in one
undo step. The copies keep their places relative to each other,
together right of the last artboard. A cut fails when it names every
artboard.
Docs: docs/mcp.md, docs/target-app-parity.md.
file.saveAsTemplate kept a name whose extension named another format
and wrote the template into it: {path: "card.png"} wrote .vctemplate
JSON to card.png, and card.pdf typed in the desktop save panel got it
too. file.saveAs {format: "ait"} answered that document.export writes
other formats, but document.export does not write .ait either.
file.saveAsTemplate now replaces another format's extension (card.png
is saved as card.vctemplate, or card.ait for format: "ait") and adds
the extension to a name whose extension names no format. The desktop
panel adds the template's extension to any name that does not end in
a template extension (card.pdf.vctemplate), as Save As adds its own.
Save and Save As still refuse ait, and the error now names
file.saveAsTemplate.
Docs: docs/mcp.md, docs/target-app-parity.md.
effect.apply and effect.setParams stored any string as the color of
Drop Shadow, Inner Glow, Outer Glow and Shift to Color. When the
effect could not read it, it drew its default color with no message,
so a typo such as #ff00 in the Drop Shadow dialog turned the shadow
black.
The commands now refuse such a color before they edit, with
"`color` must be a #rrggbb color", and the document and its undo
history stay as they were. Hex colors, the five named colors,
[r, g, b] and color objects still pass. The check runs in the
commands, so the app, command.batch steps and replayed journals get
it too. The effect dialog's OK shows the error and keeps the dialog
open, with Preview on or off. Saved documents open as before.
Docs: docs/mcp.md (effect params).
Batch over data sets names each output file after the document and the
data set, as the reference app's File + Data Set Name option does. It
joined that name onto the destination folder as it was, and a data set
name can hold any character. A data set named a/b failed to save, and
one named a/../../x wrote its file outside the destination folder. On
Windows, one named c\d also failed to save, and one named e:f left an
empty file.
The data set's name now goes through file_part, which Export for
Screens uses for its file name prefix and a format row's suffix, so
output file names have - in place of /, \ and : from a data set's name.
When two data sets then give the same name, compared without case, the
later ones get -2, -3 and so on, as artboard file names do, through a
distinct_names helper split out of unique_file_names. This covers the
folder destination and Override Save/Export.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Character panel's Small Caps, Superscript and Subscript buttons
were disabled, with "(on the roadmap)" tips, and always drawn off, and
the panel menu's items of the same names were disabled, although
text.setFormat and text.setRangeStyle already set smallCaps and
position. The reference app applies all three from the Character
panel menu.
The three buttons and menu items now turn small caps and the
superscript or subscript position on and off for the selected type, or
for the text the Type tool has selected, in Document Setup's
proportions. Turning Superscript on turns Subscript off, and turning
Subscript on turns Superscript off. They show as on when the first
selected character has the attribute, as the All Caps, Underline and
Strikethrough toggles do.
docs/mcp.md did not mention smallCaps and position; it now describes
them for text.setFormat and text.setRangeStyle.
Docs: docs/mcp.md, docs/target-app-parity.md.
dataset.import read only commas between cells and refused a file whose
first header cell wasn't `name`. A value that didn't match its
variable's kind, and a repeated data set name, were reported with the
row's record number, which is not the file line after a blank line or a
quoted line break. A data set name over 255 characters gave no line.
- When the header row, read with tabs between cells, has a tab and no
comma outside quotes, tabs separate the cells. A quoted cell may then
hold tabs and commas.
- Without a `name` column every header cell is a variable, and the rows
take the first free names Data Set 1, Data Set 2 and so on, as Capture
Data Set and blank name cells do. A first header cell `name`, in any
case, still holds the data set names.
- Value errors, a repeated data set name and a name over 255 characters
give the file line the row starts on.
- The Variables panel's Import Data Sets… dialog also lists .tsv files.
- import_fuzz.rs imports random text, random bytes and mutated exports,
comma- and tab-separated, into a document with bound text, visibility
and graph variables, selects up to three of the imported data sets in
turn, and exports every data set.
Docs: docs/mcp.md, docs/target-app-parity.md.
file.print, print.preview and print.setup took print settings only as
settings, so an agent had to read a preset with print.presets.list and
copy its settings into the call. They now take preset, the name of
[Default] or of a saved print preset in any case. The preset's settings
are used instead of the document's, settings applies over them, and
print.setup saves them with the document as one undo step. An unknown
name is a parameter error that lists the presets. The app's file.print
with params passes preset on to the engine.
Docs: docs/mcp.md, docs/target-app-parity.md.
PDF presets are kept one file each in a PDF Presets folder, ICC profiles as copies in a Color Profiles folder, next to the preferences; the desktop app and vectorcraft-cli use them. Adds color.removeProfile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The MCP server read one line, ran it and answered it before reading the next,
so notifications/cancelled was never seen during a call and every request
(even ping) waited behind a running export.
- vectorcraft_doc::cancel: a thread-local cancel token and progress sink that
long work polls. Checkpoints: PDF pages, PDF flattening, geometry bake,
raster-effect flattening, drawing objects, raster artboards, and before any
file is written. A cancelled command returns EngineError::Cancelled and
changes nothing.
- Server::serve reads on its own thread: notifications/cancelled drops a
queued request or stops the running one (no reply, as the MCP spec says),
engine-free requests (ping, the list methods, prompts/get) are answered at
once, a request that would wait behind a call running for 2 s is refused
with -32003 naming that call, and _meta.progressToken gets
notifications/progress (page n of m). Queue and output are bounded.
- The remote backend stops waiting for the app when the call is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.setProps and artboard.fitToSelection read an `index` that is
negative, fractional, a string or null as 0 and edited the first
artboard, and artboard.setProps edited the first artboard when the
call named no `index`. artboard.duplicate, artboard.copy and
artboard.cut took the Artboard tool's artboard for such an `index`.
artboard.reorder failed for it with "missing index".
These commands now read `index` as artboard.delete, artboard.move and
artboard.fitToArt do, and fail with "no such artboard" when it names
no artboard; the document and the clipboard stay as they were.
artboard.setProps without `index` fails with "missing index". Without
`index`, artboard.fitToSelection still fits the first artboard and the
copy commands still take the Artboard tool's artboard.
Docs: docs/mcp.md.
document.rasterEffectsSettings accepts a resolution from 1 to 2,400
ppi, but a file's raster_effects_ppi opened as it was saved. With 0,
-5 or 5000 in the file, object.rasterize without a ppi param failed
with "ppi must be between 1 and 2400", and document.rasterEffectsSettings
and document.info reported the stored value. With 0 or -5, EPS and
PDF export wrote a freeform gradient as a 1 x 1 px image, and EMF
export wrote every gradient as one. A saved New Document preset in the
preferences kept such a value too.
A file's or a saved preset's resolution outside 1 to 2,400 ppi is now
read as the nearer end of that range. Documents with a resolution in
range open as before.
Docs: docs/mcp.md (resolution, rasterEffectsPpi).
Multiply squared a colour overprinting itself (stroke over same-colour fill showed a darker band). Darken keeps the stronger ink per plate/channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.rasterEffectsSettings accepts addAround from 0 to 1,000 pt,
but a file's raster_effects.addAround opened as it was saved. With
addAround 1e300, the area of a raster effect image overflowed f64,
the image scale became 0 and the image got the transform
[inf, NaN, NaN, inf, x, y]. PDF export left that image out, so the
drop shadow was missing.
A file's addAround now opens clamped to 0 to 1,000 pt. An effect
image whose area or scale is not finite is not made. Export then
keeps the object with its effects, and Expand Appearance expands it
without an image, as when its PNG can't be encoded.
Docs: docs/mcp.md (addAround).
View › Guides › Release Guides only cleared the guide flag on paths
made with Make Guides. Ruler guides could not become paths by any
route, and with only ruler guides selected the command released every
guide path in the document instead.
Release Guides now also releases the selected ruler guides. Each one
becomes an open straight path with no fill or stroke at the top of the
guide's layer: an artboard guide runs across its artboard, and a
canvas guide runs across the bounds of all the artboards. The ruler
guide is deleted, the released paths are selected, and the release is
one undo step. With no guide selected, every guide path is released,
as before.
view.guides.release takes index (a ruler guide) and ids (guide paths,
and the guide paths inside them). Both are refused while guides are
locked, and index takes only a guide on a shown, unlocked layer.
Docs: docs/mcp.md, docs/target-app-parity.md.
Issue #1935 asks for batch exports of many logo variations in many
formats, each format in its own folder. This builds on Export for
Screens, which already writes every chosen artboard in every format row.
Names: a file name pattern (`name`) names every file alike. Tokens:
<filename> (the document), <name> (the artboard, asset, layer or
object), <index>, a run of # (a counter, zero-padded to the run's
length, from counterStart; counterPer item or file), YYYYMMDD,
YYYY-MM-DD, <date>, <time>, <YYYY>, <MM>, <DD>, <format>, <scale> and
<suffix>. A trailing .ext is dropped. Words are not changed: only the
date patterns and the bracketed tokens are. `date` sets the day (the
default is today, UTC). Different files that a pattern names alike get
-2, -3... Without a pattern, two rows with one name still write the
first row only, as before.
Folders: `folders` puts all files in one folder, a folder per row (as
Create Sub-folders did), per extension, per item, or per item and then
extension.
What is exported: besides artboards, assets and the full document,
`layers` (each layer's art alone, sublayers included) and `selection`
(one file of the selection, or a file per object).
Formats: rows can also be EPS, AI and VectorCraft (a document of the
item alone, its one artboard). A PDF row with printer's marks (PDF
Print in the dialog: trim, registration, colour bars, page information,
suffix -print) sits next to a plain PDF row.
Presets: document.exportPresets.list, .save and .delete keep batch
export presets with the preferences, and `exportPreset` uses one under
the call's own params. Built-in: Logo Package (SVG, PNG 1x and 2x, PDF
and print PDF, a folder per format) and Print-Ready PDF.
Dialog: Layers and Selection tabs with thumbnails; an Export Preset
menu with Save and Delete; Folders; File Name with Insert for the
tokens, Start at, Prefix, and an example of the first file's name. The
OK button says Export Layer or Export Selection on those tabs.
Tests: the pattern tokens, the request's example (SVG, PNG, PDF and
print PDF for artboards 1-3, a folder per extension, the print PDF a
bigger page), folders by item and both, the counter by item and by
file, numbered duplicates, layers and the selection, EPS, AI and
VectorCraft per artboard, presets (built-in, saved, used, replaced,
deleted, kept with the preferences), bad params, and the dialog (every
tab, the example name, a pattern export into folders, the Layers and
Selection tabs, presets applied and saved). The three tests that
refused EPS and VectorCraft rows now check those files. New labels
are translated in all 19 catalogs.
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
bflatastic