The Paragraph panel menu's Justification… was a disabled stub, and justified
lines stretched word spaces between fixed limits (80% to 150%).
Each paragraph now has Justification options: Word Spacing, Letter Spacing
and Glyph Scaling (Minimum, Desired, Maximum, in percent), Auto Leading and
Single Word Justification. Desired applies to every line; a justified line
fills its measure with word spacing first, then letter spacing, then glyph
scaling, each within its range, and past them its word spaces take the
rest. The Every-line Composer scores lines by that flexibility. Auto
Leading sets the leading of characters whose leading is Auto. A justified
line holding one word is spread between its letters (Full Justify) or
aligned left, centre or right.
The defaults are the documented ones (80/100/133, 0/0/0, 100/100/100, 120,
Full Justify), saved only when they differ. Because the default maximum
word spacing is 133%, justified paragraphs break differently than before;
the Every-line Composer's second pass is now unbounded for justified text
(it used to give up past four times the stretch and fall back to the
Single-line Composer, which the narrower default range would make common),
and lines that can't stretch at all are still refused.
text.setFormat takes wordSpacing, letterSpacing, glyphScaling ([min,
desired, max] or {min?, desired?, max?}), autoLeading and
singleWordJustification; Minimum ≤ Desired ≤ Maximum must hold or nothing
changes. Paragraph styles carry the options (New and Redefine capture
them), and Reset Panel resets them. Justification… opens a dialog
(ui.justification) with Preview; OK is disabled while a row is out of
order. Live SVG text places characters the options move, and a glyph that
Glyph Scaling scales is stretched to its width; PDF uses the glyphs'
transforms. Vertical type isn't glyph scaled; type on a path doesn't use
the options.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2755.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Paragraph panel menu's Roman Hanging Punctuation was a disabled stub.
It is now a per-paragraph attribute: in a left-to-right paragraph of point
or area type with it on, the punctuation Optical Margin Alignment hangs
(quotation marks, hyphens, full stops and commas wholly; asterisks,
tildes, ellipses, en and em dashes, colons and semicolons by half) hangs
outside the margin when it starts or ends a line, on the same sides
(left-aligned lines at their left, right-aligned at their right, centered
and justified at both); letters don't hang. With Optical Margin Alignment
on as well, letters hang too. East Asian punctuation keeps hanging only
through burasagari. The layout shares Optical Margin Alignment's hanging
code, given the share of each glyph that hangs.
text.setFormat takes romanHangingPunctuation; it is off by default, saved
only when on, carried by paragraph styles (New and Redefine capture it)
and turned off by Reset Panel. The panel menu item is a checkbox enabled
with type selected.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2756.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
VectorCraft listed a variable font's named instances as styles, but
type could not be set between or past them. The reference app's
Character panel has a Variable Font control that adjusts a variable
font's axes, such as Weight, Width and Slant.
Type now keeps Variable Font settings by axis tag
(CharStyle::font_axes, saved as fontAxes only when set). text.setFormat
and text.setRangeStyle take fontAxes: each value is clamped to its
axis's range, a tag the font has no axis for is left out, and null
goes back to the style's own setting. Another font or style clears
them, including one from a character style that does not set them. A
character style captured from type sets them, with {} for none.
text.fontList {family, style} lists a font's axes.
Layout, outlines, the substituted-glyph highlight and PDF export use
the font instanced at the settings, and neighboring runs at different
settings are shaped apart, as runs in different fonts are. SVG export
writes them as font-variation-settings, the wght setting as the weight
and the wdth setting as font-stretch, and embeds the font instanced
there; SVG import reads font-variation-settings back. Legacy .ai export
warns that the settings are left out.
The Character panel shows a Variable Font button for a variable font.
It opens a slider and a field for each axis the font does not hide,
labeled with the font's name for the axis, and screen readers get each
slider under that name. A drag is one undo step. Reset Panel leaves
the settings, as it leaves the font and style.
Missing Glyph Protection now keeps the settings and the font version
on the characters that keep their font; before, it kept only the
family and style. A character style applied or redefined with another
font now clears the old font's version, as text.setStyle does, unless
the style sets one. SVG export with embedded fonts warns when faces of
one weight, style and width share characters, which browsers then draw
in one of the faces.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
With several artboards selected, the Artboards panel menu's Duplicate
Artboards copied only the active one, and Copy and Cut with the
Artboard tool took only the tool's active artboard.
artboard.duplicate, artboard.copy and artboard.cut now take `indices`,
and without `index` or `indices` they act on the artboards the
Artboard tool has selected. Duplicate Artboards passes the selected
artboards and selects the copies. Duplicate and Cut are one undo step
each, and Paste adds every copied artboard back, with its art, in one
undo step. The copies keep their places relative to each other,
together right of the last artboard. A cut fails when it names every
artboard.
Docs: docs/mcp.md, docs/target-app-parity.md.
artboard.setProps and artboard.fitToSelection read an `index` that is
negative, fractional, a string or null as 0 and edited the first
artboard, and artboard.setProps edited the first artboard when the
call named no `index`. artboard.duplicate, artboard.copy and
artboard.cut took the Artboard tool's artboard for such an `index`.
artboard.reorder failed for it with "missing index".
These commands now read `index` as artboard.delete, artboard.move and
artboard.fitToArt do, and fail with "no such artboard" when it names
no artboard; the document and the clipboard stay as they were.
artboard.setProps without `index` fails with "missing index". Without
`index`, artboard.fitToSelection still fits the first artboard and the
copy commands still take the Artboard tool's artboard.
Docs: docs/mcp.md.
The Paragraph panel menu's Hyphenation… was always disabled, and
automatic hyphenation used fixed limits: words of 6 letters or more,
3 letters on each side of the hyphen, any number of hyphenated lines
in a row, and capitalized words hyphenated.
Each paragraph now has hyphenation options: Words Longer Than, After
First, Before Last, Hyphen Limit, Hyphenation Zone and Hyphenate
Capitalized Words. The defaults are the fixed limits, and documents
keep their line breaks. The options are saved only when they differ
from the defaults. text.setFormat takes wordsLongerThan, afterFirst,
beforeLast, hyphenLimit, hyphenationZone and hyphenateCapitalized, and
paragraph styles carry the options. Hyphen Limit applies with both
composers. Hyphenation Zone applies with the Single-line Composer: a
line whose text before the next word already ends within the zone
breaks before that word instead of hyphenating it.
Hyphenation… is enabled with type selected and opens a Hyphenation
dialog (ui.hyphenation) on the values the Paragraph panel shows. OK
runs text.setFormat with the values that changed, as one undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
Duplicate Artboards, the Artboard tool's Alt-drag (artboard.move with
copy) and Paste of a copied artboard gave the new artboard the largest
artboard id plus one, saturating. In a document with an artboard id
of 4,294,967,295 (u32::MAX), which only a hand-made file has, the copy
got that same id. Artboard guides record the id of their artboard.
Deleting either of the two artboards with that id then deleted the
guides of both, and guide.list reported the copy's guides on the
other one.
push_artboard_copy now takes the id from Document::next_artboard_id,
as artboard.new and Convert to Artboards do. Since the #1718 fix, that
function returns the smallest free id when the largest is u32::MAX.
In a document whose artboard ids are all below u32::MAX, a copy gets
the same id as before.
Docs: docs/target-app-parity.md.
These commands removed, moved or copied one row or object at a time:
the Layers panel's Delete Selection, Duplicate Selection, Collect in
New Layer, row drags, Merge Selected, Flatten Artwork and Release to
Layers, and Cut Artboard, Duplicate Artboard and the Artboard tool's
Alt-drags that copy art. Each edit moved the later rows of the same
layer or group to other indices. The next lookup by id then walked the
tree, and after every fourth such walk Document::index_path rebuilt
the whole lookup cache. Release to Layers also walked the document
twice for each new layer to name and color it. With 25,000 rectangles
in one layer, a release build of vectorcraft-cli took 11.9 s for
Duplicate Selection and 17.7 s for Release to Layers.
The commands now remove, move and copy the rows in one pass over each
layer or group, with Document::remove_many and Document::wrap, and
with copy_above, the copy pass of duplicate_in, which Duplicate
Selection and the artboard copies now share. Release to Layers names
its new layers from one walk of the document. Merge Selected checks
the target layer's objects against a set of the listed rows, and
Delete Selection checks the top-level layers against such a set. In a
document whose ids are unique, the rows keep their order, new rows and
layers take the same ids, names and colors, and the selection, the
undo step and the journal are the same. A release build with this
change takes 98 ms for Duplicate Selection and 26 ms for Release to
Layers.
Docs: docs/target-app-parity.md.
Text formatted in a graph, as
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/visualize-data/format-the-text-in-graphs.html
describes (the whole graph with the Selection tool, or labels picked
with Group Selection, through the Character and Appearance controls),
now survives the graph being drawn again from its data.
- A graph keeps a character style per kind of label: value axis
numbers, category labels (category axis, radar spokes, pie names)
and legend labels (beside or across the top, or in wedges).
- text.setStyle, text.setFormat and fill/stroke changes on a graph's
labels apply the same change to their kind's kept style, so only what
the user changed is kept and every label of that kind follows. A
change to part of a label's text isn't kept.
- Labels are told apart by where the graph draws them, not by their
text, so a category named "2" and the value axis' 2 stay apart.
- Label spacing follows a kept size (legend rows, offsets from the axes
and wedges), so bigger labels don't overlap; at 9 pt it's as before.
Wedge labels stay white on dark wedges unless given a colour.
- A kept style from a file is held to the Character controls' limits.
Own choice, as the page doesn't say what happens on a data change:
formatting one label formats its whole kind, since the labels are drawn
again from the data. Other ways of restyling text (eyedropper,
character styles, Find Font) aren't kept yet. New fields are written
only when set; graphs without kept formatting draw the same art as
before.
artboard.move with moveArt (the Artboard tool's drag of one artboard or
several and, with copy, its Alt-drag), artboard.duplicate with art and
artboard.rearrange with moveArtwork moved the art, or its copies,
without their pattern tiles, whatever General › Transform Pattern Tiles
was set to. They now follow the preference as the transforms and
artboard.setProps do: with it on, pattern fills and strokes move with
the art. Each also takes a `patterns` param for one call. When the art
uses a pattern, the journal records the choice, and a recorded action
plays back with it.
Docs: docs/mcp.md (transformPatternTiles, artboard copies),
docs/target-app-parity.md.
# Conflicts:
# crates/engine/src/cmd/menucmds.rs
Adds the Character panel menu's Digits option (with the Middle Eastern /
Indic options, beside Paragraph Direction in the Paragraph panel) as a
character attribute: CharStyle::digits, saved only when set, with
text.setFormat {digits} and text.setRangeStyle {id, start, end, digits}
("default" | "arabic" | "hindi" | "farsi"; a bad value is an error).
Shaping draws every digit of the Western, Arabic-Indic (U+0660–U+0669)
and Eastern Arabic-Indic (U+06F0–U+06F9) sets in the chosen system,
whatever was typed, before font fallback, so a font without the
Arabic-Indic digits gets a fallback for them. The text, its clusters,
the caret, selection and search stay as typed, as with All Caps; SVG
export writes the digits as drawn.
Catalog rows for Digits, Arabic, Hindi and Farsi in the ten translated
languages. Docs: docs/mcp.md (Digits), type-parity.md (digit types
done; Character Direction, kashidas, composers and the split caret
still missing), target-app-parity.md and gaps.md.
Behaviour from the public documentation (a character-level option with
the values Arabic, Hindi and Farsi in the Character panel menu):
https://helpx.adobe.com/indesign/desktop/language-and-proofing/arabic-and-hebrew/choose-digit-types.html
Tests: doc (the mapping and serialization), text (glyphs of "page 3" in
Hindi/Farsi equal the typed Arabic-Indic digits' on the typed clusters;
skips without a font covering the three sets), engine (setFormat,
setRangeStyle, undo, error), svg (digits written as drawn), ui-egui
(the menu shows with the Indic options).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The Artboard tool and the Artboards panel only ever had one artboard
selected, so Shift-clicking another didn't add it. As in Illustrator:
- Artboard tool: Shift-click adds an artboard to the selection (it
becomes active) or takes one out; a plain click on a selected one keeps
the selection, so a drag moves them all (Alt copies them all, the
copies becoming the selection), and Delete removes them all, one
artboard always staying. The other selected artboards show dashed
bounds; `selected` is a tool option.
- Artboards panel: with the Artboard tool, Shift- or Ctrl/Cmd-click on a
row adds or removes it, every selected row is highlighted, and Delete
Artboard removes them all.
- `artboard.move` and `artboard.delete` take `indices` besides `index`:
several artboards in one undo step, each with its art (an object moved
once where artboards overlap).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The second half of #966. With Proportional Metrics on, a vertical segment is
also shaped top to bottom, with and without `vpal`: the difference gives
each glyph's change of advance down the column and its x and y placement.
An upright glyph (not tate-chu-yoko) in a font with vertical metrics takes
them on top of its cell, so it moves with its shorter cell; a font without
vertical metrics keeps `upright_cell`'s cell, and with the switch off
nothing is shaped twice and the column is as before.
As in horizontal type, Line-end Punctuation Half Width takes nothing more
off the punctuation `vpal` re-spaced and trims the punctuation it leaves
full height as before. Docs: mcp.md, and Proportional Metrics leaves the
missing lists in gaps.md, type-parity.md and target-app-parity.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A character attribute (Character panel menu with the East Asian options;
`text.setFormat` / `text.setRangeStyle {proportionalMetrics}`), saved only
when on. In horizontal type it applies `palt`; vertical type sets as before
until the vertical shaping change (`vpal`) follows.
Line-end Punctuation Half Width takes nothing more off the punctuation
`palt` re-spaced (the flush opening bracket, consecutive punctuation, the
line-end half width): the segment is shaped once more without `palt`, and
the glyphs whose advance differs are marked. Punctuation the font leaves
full width is trimmed as before. SVG writes `"palt" 1` with the
character's other features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After scaling 12 pt type 2x, the Character panel still showed 12 pt and
typing 10 pt gave 20 pt type. Character controls and text commands now
work in document points: the size, leading and baseline shift shown and
set are the stored ones times the text's scale along its em height, and
horizontal scale includes the ratio of the transformed em axes. Rotation,
reflection and shear stay in the transform, so text remains editable.
Groups' text counts, keyboard increments use the same units, Shrink
Text to Fit works in document tenths, and a collapsed transform rejects
dimensional edits without touching the document.
text.getRange takes effective: true for the document-space values.
Paragraph panel › Kinsoku Set (with the East Asian options) and `text.setFormat {kinsoku}`, as
decided in #633:
- Hard: today's set, so existing documents don't change; the default, and not saved.
- Soft: as Hard, except that 々, the prolonged sound mark ー (JLREQ cl-10) and small kana (cl-11)
may start a line: JLREQ's level 3 line-breaking rules (Appendix C.3). Half-width forms aren't in
those classes and stay off the line start.
- None: no kinsoku.
The setting reaches every break the composers consider (greedy, every-line and hyphenation
points). Reset Panel returns to Hard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Character panel menu › Character Alignment gains ICF Top/Right and ICF Bottom/Left, and
`charAlign` takes `icfTop` / `icfBottom`: a character smaller than the largest on its line lines
up its ideographic character face's top (right, vertical) or bottom (left) with the big one's.
`FontFace::icf_margins` places the ICF inside the em box as the OpenType baseline tags define it
(https://learn.microsoft.com/en-us/typography/opentype/spec/baselinetags): `icfb` / `icft` of the
BASE table's horizontal and vertical axes against `ideo` / `idtp` (else the OS/2 typographic
descender and one em), for Han ideographs (else kana, else the first script). Without them, as that
page allows, the average ink box of some ideographs and kana; a face without ideographs uses its
em box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each paragraph has its own alignment, indents, spacing, hyphenation, tab
stops and paragraph style (TextObject.paras; para stays paragraph 0's, so
old files and readers work). Layout, editing (split/merge), threads, the
Paragraph/Tabs/Paragraph Styles panels, ranged text.setStyle/setFormat/
tabs/paraStyle.apply, SVG export/import and the fuzzers follow.
Illustrator's Every-line Composer balances the breaks of the whole
paragraph for left/centre/right aligned text too, not only justified
text. VectorCraft only composed justified area text; ragged text was
always broken greedily.
- Model: ParaStyle.composer (vectorcraft_doc::Composer, re-exported by
vectorcraft-text), Every-line by default like Illustrator, saved only
when Single-line. layout() reads it from the object;
LayoutOptions.composer is now an Option override for tests.
- Composer: the justified gate is gone. Ragged lines never shrink (a
line that doesn't fit ends the node), badness is 100*r^3 with r = the
line's leftover space over a rag zone of 1/6 of the width (finite for
lines without spaces); the last line is free unless shorter than 1/3
of the width (measured in zones of 1/3), so a lone short word on the
last line pulls a word down. Hyphens cost 25 in ragged text (50 in
justified). Knuth-Plass fitness classes with adjacency demerits
(justified 10000, ragged 1000). Lines past the last width change
share one node key, active nodes are capped (4096) and paragraphs
over 200k glyphs break single-line, so work stays bounded; ragged
tries a tolerance of one rag zone, then any fitting breaks, then
falls back to greedy.
- text.setFormat {composer: "singleLine"|"everyLine"}; the Paragraph
panel menu's composer items work with a check mark (Reset Panel goes
back to Every-line).
- Tests: ragged Every-line moves "or" down in "Destroy all creatures
with toughness X or less." where greedy leaves "less." alone; the rag
of long paragraphs is no worse than greedy (sum of squared leftover
and of neighbour differences); Single-line is greedy; the 10k-char
layout budget covers ragged text; command test with undo; native
format round trip (rich_session's text is now Single-line).
No existing test needed changing: the justified tests and
hyphenated_layout_adds_hyphens (ragged, now Every-line) still pass.
Auto alignment (start of the paragraph direction) is ragged; a wrapped
line's Mojikumi flush opening bracket gives its half em back to the
composer, as in the line loop; tests cover Auto in both directions.
Layout of 10k chars, release: justified Every-line 5.6 ms, ragged
Every-line 5.8 ms, ragged Single-line 4.8 ms.
- The Paragraph panel menu's Burasagari submenu reads None / Regular / Force, as the reference
app's help names them (`text.setFormat` keeps "none"/"standard"/"forced", its scripting names);
Reset Panel goes back to new type's Regular.
- The full-width ，．and half-width ､｡ hang too; Latin commas and full stops never do, so Latin
text keeps its breaks and composer with new type's default (tested). The spaces after a hanging
mark stay on its line.
- docs/mcp.md: a Burasagari section. ROADMAP: wording, Last updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Paragraph panel menu › Burasagari › None / Standard / Forced (with the East Asian options) and
`text.setFormat {burasagari}`:
- None: a comma or full stop that doesn't fit goes to the next line with the character before it.
- Standard: one that doesn't fit hangs outside the line; one that fits stays inside.
- Forced: one ending an area type line always hangs, and the rest of the line fills the measure.
Only 、 and 。 hang (closing brackets don't), in the width their mojikumi gives them. Horizontal
and vertical. Saved only when not None; new type keeps None. Paragraphs with burasagari are
composed line by line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of a ruler did not snap at all (only Shift to the ruler's
ticks): they now go through the engine (`Session::ruler_guide`, a
`NewGuide` previewing `guide.add`, one undo step) and snap as a moved guide
does: with Smart Guides to the edges, centres (so the sides' midpoints) and
anchors of the art and of the artboards, labelled; with Smart Guides off,
View > Snap to Point pulls new and moved guides onto anchors. Moving art
with the Selection tool already snapped flush to artboard edges and centres
with Smart Guides on; a test now covers it.
Artboard guides: `Guide.artboard` holds an artboard id (written only when
set, so canvas guides save as before and older files open unchanged).
`guide.add {artboard}` makes one, `guide.list` reports it; a guide dragged
out of a ruler with the Artboard tool belongs to the active artboard. It is
drawn, picked and snapped to across its artboard only, moves with it
(`artboard.move`, a pure move in `artboard.setProps`, `artboard.rearrange`),
is copied with it (`artboard.duplicate`, Alt-drag copy) and deleted with it
(`artboard.delete`, the guide selection kept in step).
Guides as Layers rows with their own lock and hide (part d) stay open: ruler
guides are not layer nodes; Lock Guides locks them all, and Make Guides
paths are Layers rows already. Listed in the ROADMAP parity row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Artboard tool chosen, Copy and Cut take its artboard together with
the art fully inside it (when Move/Copy Artwork with Artboard is on), and
Paste brings both back in one undo step: Paste right of the last artboard,
Paste in Place / in Front / in Back where it was, into this or another
document, the art going back into the layers it came from (Paste on All
Artboards pastes the art alone). The clipboard carries the artboard
(Clipboard::artboard); a pasted artboard keeps its name when it is free.
Duplicate Artboards (the Artboards panel menu, and now a row dragged onto
New Artboard) copies the art too: artboard.duplicate {index?, art?} defaults
to the Artboard tool's artboard and moveArt option and reports the copies.
It shares copy_artboard with the Alt-drag copy (artboard.move {copy}).
New commands reachable over MCP: artboard.copy and artboard.cut
{index?, art?}; edit.copy / edit.cut run them while the Artboard tool is
chosen (and are enabled then with nothing selected). Docs (mcp.md), the
tool and panel docs, translations of the new labels and the ROADMAP follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
text.setRangeStyle takes charAlign, so the panel menu works on the
characters selected with the Type tool (it routes there while text is
edited, and charAlign alone was answered with "nothing to change").
One char_align_param parses it for both commands. The menu shows with
Preferences › Type › Show East Asian Options, like Mojikumi Set and
Top-to-Top Leading. Rows in the Simplified Chinese, Spanish and
Brazilian Portuguese catalogs; the Japanese Em Box Center names the em
box. ROADMAP: the gating, the range command, and ICF top/bottom still
missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Characters of different sizes on one line all sat on the Roman baseline.
Japanese layout usually lines them up by their ideographic em boxes
instead (a 16 pt 第一回 next to 32 pt 雅楽 centred on it, not sitting on
its baseline). The Character panel menu now has Character Alignment:
- `CharStyle.char_align`: Roman Baseline (as before, the default), or the
em box Top/Right, Center or Bottom/Left: a character smaller than the
line's largest moves so that its em box top, centre or bottom lines up
with the largest's (the em box from the font's vertical metrics, else
0.12 em below the baseline to 0.88 em above it). Vertical type the
same across the column (top → right). Written only when not Roman
Baseline.
- `text.setFormat {charAlign: "romanBaseline"|"emBoxTop"|"emBoxCenter"|
"emBoxBottom"}`; the menu shows the selection's setting; catalog rows
in ja and zh-hant.
- Not yet: aligning on the ICF (average character face) top and bottom.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese layout measures leading from the top of one line's ideographic
em box to the next (the right side, in vertical type), not from baseline
to baseline. The Paragraph panel menu now offers both:
- `ParaStyle.leading_model`: RomanBaseline (as before, the default) or
EmBoxTop. With EmBoxTop a line's leading is the space below it — the
next line's em box top is this line's plus its leading, and the next
baseline hangs from there by that line's tallest em box — and area
type's first line touches the top of the frame (its em box top on the
frame's top, at least Area Type Options' minimum). With baseline
leading a line's leading stays the space above it.
- Lines of one size are exactly as far apart either way; the models
differ for mixed sizes and for the first line of area type (fonts
whose ascent isn't the em box top: Hiragino's nearly is).
- The em box top comes from the font's vertical metrics (#343), else
0.88 em. Written only when EmBoxTop.
- `text.setFormat {leadingModel: "romanBaseline"|"emBoxTop"}`; menu items
Top-to-Top Leading / Bottom-to-Bottom Leading (checked as set); catalog
rows in ja and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator sets a paragraph's direction (Left-to-Right / Right-to-Left
Paragraph Direction in the Paragraph panel, with the Middle Eastern
options) and keeps its alignment buttons physical; it has no automatic
alignment toggle. So:
- ParaStyle.direction (None: from each paragraph's first strong
character, as before; written only when set), the Paragraph panel's two
direction buttons with Show Indic Options (original icons), and
text.setFormat {direction: "auto"|"leftToRight"|"rightToLeft"}. The
layout uses it as the base direction.
- The Automatic alignment check box is gone. Justify::Auto stays as the
start of the paragraph's direction, set on new type only (text.create,
the Type tools, with the mojikumi default in one new_type_para()):
TextObject::point is Left again, so importers (PDF, SVG, DXF, EMF) keep
their own alignment. The alignment buttons show what Auto resolves to.
- Bidi only where there is something right to left: plain paragraphs skip
the algorithm (no per-layout allocation), it runs once per paragraph
(shaping takes the paragraph's levels instead of recomputing them; path
type computed it four times), and the shaper keeps Han, Hiragana,
Katakana and Bopomofo in one segment (splitting at every change of
script cost Japanese text a shaper call per kana-kanji switch).
- Vertical type keeps its logical order, so its glyphs and lines are not
marked right to left (the caret no longer runs backwards down a column).
- PDF import puts Hebrew and Arabic, which PDFs (and VectorCraft's own
export) draw in visual order, back in logical order with the direction
that shows it as drawn; with bidi layout it came back mirrored.
- SVG import pins the direction SVG implies (left to right unless
direction: rtl); SVG export also outlines right-to-left paragraphs.
- Docs (development.md), ROADMAP (folded into the Type entry, Type core
row) and README updated; catalog rows for the new labels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.move with copy and artboard.duplicate now make the copy with one helper: a
new id that can't overflow and a name of its own (`<name> copy`, then `<name> copy 2`…,
so two copies of one artboard no longer share a name). `moved` lists the copies a copy
moved rather than the originals it left. Test it with and without moveArt, and note
Alt-drag in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese full-width punctuation is half a mark and half a space (an
opening bracket's space before it; a closing bracket's, comma's or full
stop's after it). Set solid, 」「 or 。」 show a full em of air between
the marks, and a line ending in 。 stops half an em short of the edge.
- `ParaStyle.mojikumi` (Paragraph panel › Mojikumi): None, or Line-end
Punctuation Half Width, which (JLREQ 3.1.4) lets consecutive
punctuation share one half-em space — a closing mark followed by
punctuation loses the space after it, an opening bracket after another
the space before it — and sets a closing mark ending a line half
width. Only full-width marks (advance an em) are touched, never inside
a tate-chu-yoko block; vertical type the same way down the column.
- New type (`text.create`, Area/Path Type) takes Line-end Punctuation
Half Width, the usual default of Japanese layout; documents from
before it and imported text keep None (written only when set, so
older files and older apps are unaffected). `text.setFormat
{mojikumi: "none"|"lineEndHalf"}`.
- Builds on #344: on justified lines the room it frees is spread
between the characters.
- Catalog rows in ja and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Document Setup is a tabbed dialog over one engine command,
document.setup (no params: a query; any keys: one undo step;
document.setUnits stays as the units alias).
- General: units, bleed (four sides with a link toggle), Edit Artboards,
Show Images in Outline Mode (greyscale pixels under the frame),
Highlight Substituted Fonts/Glyphs (pink boxes on screen only).
- Transparency: grid size and colour presets or custom colours, Simulate
Colored Paper, the flattener preset (built-in or saved) and Discard
White Overprint (Overprint Preview keeps white overprints visible).
- Type: language with its quotes, Use Typographer's Quotes for the Type
tool and Smart Punctuation, superscript/subscript size and position and
small caps size (Character panel position/smallCaps; changing the
setup restyles the text in the same undo step), text export (SVG text
as text or outlines by default).
- The canvas draws a red bleed outline and the grid in the document's
colours and cell size as one textured quad, also in rotated views; a
white Background Contents exports raster formats opaque.
Model: Document.setup (DocSetup, defaulted, skipped when default) and
CharStyle position/small_caps; old files load unchanged.
tests_transparencygrid's helper now finds the grid by its texture (the
grid is one textured mesh instead of per-cell rectangles).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No behaviour change: every command keeps its id, label, menu, shortcut and
params doc.
- Engine: swatch.* -> cmd/swatch.rs, graphicStyle.* -> cmd/style.rs,
appearance.* (incl. copyFrom) -> cmd/appearance.rs, stroke.set/setAdvanced
-> cmd/stroke.rs, paint.editGradient/setGradientGeom -> cmd/gradient.rs.
Shared helpers in cmd/mod.rs: leaf_targets/paint_targets (replacing three
copies) and unique_name (swatch and graphic style naming).
- UI: dialogs.rs -> dialogs/ with one file per dialog and a DialogSpec
registry (one DialogKind row per dialog); shared field widgets in
dialogs/form.rs. Headless frame tests draw and confirm every dialog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
