The question for brushes no stroke uses reads "Delete the brush selection?" with Yes and No, from the bottom button and the panel menu, and Alt-click (Option-click on macOS) on the button still deletes them without asking. When a stroke uses one of the brushes, the button, Alt-click and the menu item ask with Remove Strokes and Cancel; Remove Strokes deletes the brushes and the strokes that used them become plain strokes.
brush.unused also counts the tile that pattern editing's Cancel puts back, which brush.delete already clears, so the panel asks the in-use question for a brush only that tile uses.
SVG export ignored an image's colorize paint and wrote the image's own
black, white and gray pixels. EPS export flattened every colorized image
into a process-color raster, so a spot color lost its plate. Both now
write the image in the fill color, with the coverage the canvas and PDF
export use (darkness times alpha), so white and transparent pixels take
no color.
- SVG writes a coverage PNG as a mask over a rectangle in the color,
shared between repeated images while each keeps its own color. Linked
mode writes the coverage PNG as a file, and SVG Tiny 1.2 writes a PNG
in the color. A colorized image whose pixels are missing, or whose
grayscale pixels can't be decoded, is left out with a warning.
- EPS writes fully covered or uncovered pixels as an imagemask in the
color's process or Separation ink (Registration on every plate), and a
grayscale image as ink samples scaled by coverage. Level 3 masks its
uncovered pixels out and Level 2 writes them white; gray midtones are
written over white, with the existing warnings.
- EPS flattening no longer counts a solid colorize paint on a grayscale
or 1-bit image as transparency by itself. Opacity, blending modes,
opacity masks, effects and overlapping transparent art still flatten
it, and so does a colorize paint the writer can't draw.
The svg crate's tests turn on resvg's raster-images feature to render
the embedded PNGs.
Docs: docs/mcp.md, docs/target-app-parity.md.
Blends, envelopes, repeats and Intertwine groups that hold a pattern fill
with a transparent tile image were each expanded under a limit of their
own, so many of them together had no limit. Their art now counts toward
the same limit as the pattern tiles, and an object whose art would pass
it stays live.
EPS export expanded the pattern fills whose tile images need flattening and
then flattened the result with flatten_document, which expanded them again
with a new object limit. PostScript printing did the same, on the layers
shown rather than the layers that print. EPS export now flattens the
expanded document without expanding it again (flatten_expanded), and
PostScript printing leaves the expansion to the flattener, which runs on
the layers that print, and only checks for such pattern fills to warn.
The expansion counted the objects a pattern fill made only after making
them, so one shape could clone up to 250,000 tile positions times the
tile art's objects past the limit. Each fill now counts its tiles before
they are made, and after outlining strokes and effects for turned or
sheared tiles, and keeps room for the copy and group of the fills after
it. A fill that does not fit stays a pattern fill.
A pattern fill in a pattern's tile art that paints a see-through or
colorized image was not counted, so PDF 1.3 export kept it as a
pattern and failed on its transparency. Detection now follows pattern
fills in tile art down to the three levels the canvas draws, skipping
hidden tile art, and the tiles the expansion makes are expanded again
for them. Expansion stops once the expanded art holds MAX_GENERATED
objects.
Blends, envelopes, repeats and Intertwine groups that hold a see-through
or colorized pattern tile image are expanded into the art the writers
draw for them before the tiles are expanded, so those tiles are
flattened too. Random Transform effects in that art are baked first.
Hidden shapes, shapes in hidden groups or layers and template layers are
skipped: expanding a hidden shape made its tiles show in the file, and
art that is not written no longer makes a flattened copy of the document.
Flattening counted every colorized image as transparency, in the art and
in pattern tiles. A new flattener option, keeps_colorize, stops counting
an image colorized with a solid paint whose pixels are grayscale or 1-bit,
for a format whose writer draws such images in their ink. Opacity,
blending modes, opacity masks and effects still flatten them, and pattern
tiles are still expanded for those. The option is off, so exports flatten
as before; the EPS writer that draws colorized images turns it on.
The EPS pattern tile tests now check the exported colors, and a tile
group with opacity for the warning.
PDF 1.3, PDF/X-1a, PDF/X-3, EPS and PostScript printing flatten
transparency with `flatten_document`, which only looked at art in the
layers. An image with see-through pixels, a colorize paint, opacity or
a blending mode drawn only through a pattern fill stayed in the pattern
definition, so the flattener returned early and the writer drew the tile
opaque and uncolorized (PDF 1.3 export failed on the transparency left).
`flatten_document` now first expands pattern fills whose tile image
needs flattening into their tiles, as legacy .ai save does. See-through
tile pixels count only where the caller counts see-through images (PDF
1.3); EPS level 3 already masks them out. The EPS and PostScript print
transparency warnings now see those tile images too.
Homography::then_after returned products whose entries could overflow to
infinity or become NaN. A move, transform or grid reproject of type or a
symbol instance whose stored projection has large finite entries stored such
a product, and the type was then drawn flat, since a projection that is not
finite reads as none.
- Homography::checked_then_after returns None when an entry of the product
is not finite.
- project_node composes each type and symbol instance projection with it and
returns false, leaving the object as it is, when one would not be finite;
moves and transforms in perspective and Define Perspective Grid with
reproject then return the horizon error and leave the document unchanged.
- transform_map, attach_homography and size_homography return None for such
a product.
- Edit Text returns the horizon error, and does not enter isolation mode,
when the type cannot be shown flat where it is drawn.
effect.apply now reports the item of the first selected object, whose row
the active item is. With nothing selected, an explicit aligned item returns
the command's error instead of an internal error.
The Appearance panel's active row is a row of the first selected object's
stack, but fill, stroke, gradient and effect edits matched it against the
object that paints first. When the selection was made top object first and
the objects' stacks differ, an edit changed another row: with the red fill
of [red, white, Stroke] active above a [white, Stroke] object, Fill set the
white row instead.
These edits now match the active row against the first selected object (or
the compound path holding it), as Add New Fill and Reduce to Basic
Appearance already do. Gradient edits also read whether the active row is a
fill or a stroke from that object.
Found while testing crates/engine/src/cmd/variablecmds/csv.rs:146 (csv_escape) and :158-163 (cell_to_value)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
library_file_name kept CON, NUL, COM1 and the like, which Windows treats as
devices, not files. It now adds a - after such a name (CON-.json).
Part of #3602
Each patch of a gradient mesh was cut into 8 x 8 flat quads for SVG export,
Object > Expand and the other outputs that cannot shade a mesh, whatever its
colours, so a patch of one colour became 64 identical pieces. Neighbouring
quads are now joined into square blocks wherever the colour changes by no
more than about one 8-bit step across the block; the block's outline runs
through its quads' corners, and a patch that folds over itself is not joined.
The move drag remembers the plane it places loose art on. Pressing 4
during the drag, or dragging on after it, previews and commits the move
on that plane instead of dropping it. A 1-3 key pressed before the drag
threshold also sets the plane the move uses.
perspective.move takes constrain: true instead of a plane-space
direction. For each object, the command snaps the move to the nearest
axis or 45-degree diagonal of that object's own plane, so a selection on
several planes keeps every object on a line of its plane. The tool sends
the raw pointer with the flag.
On a diagonal, Snap to Grid now moves along the diagonal by the nearer
per-axis correction, so that edge lands on its gridline.
perspective.move takes an optional constrain: [dx, dy], a plane-space
direction. For an in-plane move, Snap to Grid's correction is projected
onto that direction, so a move the Shift key constrains to a plane axis
or a 45-degree diagonal stays on that line when an object edge lies near
a gridline. The Perspective Selection tool sends the direction for
Shift moves and copies. Moves without the param behave as before.
Holding Shift while dragging objects with the Perspective Selection tool
snaps the move, in the plane's own coordinates, to the nearest plane axis
or 45 degree diagonal. This applies to plain moves and to Alt and
Ctrl+Alt copies. The preview, the final move and the measurement label
use the snapped point. Pressing or releasing Shift, pressing 5 and
pressing 1 to 4 during the drag recompute the preview from the pointer;
a move perpendicular to the plane is not constrained.
The targets are in paint order, so the first selected object is not always the first target. The active row is now matched against the first selected object wherever it is among them.
Reduce to Basic Appearance kept the topmost visible fill and stroke even
when another fill or stroke row was selected in the Appearance panel.
It now keeps the selected row in place of the topmost one of its kind,
and in each other selected object the row equal to it. With ids, or
with no selected row, it keeps the topmost ones as before.
With a fill row selected in the Appearance panel, Add New Fill now
inserts a copy of that row directly above it and selects the new fill.
Rows already above the selected one stay where they are. Before, the
new fill was always a copy of the topmost fill, added at the top.
The selected row belongs to the first selected object. In a mixed
selection, an object that shares that row gets the copy above its own
equal row; an object that does not share it gets a copy of its top
fill on top, as before. With a stroke row selected, or with `ids` or
`target: "contents"`, Add New Fill works as before.
The panel drops rows that were Cmd- or Shift-clicked together when the
active row changes outside the panel, so after Add New Fill (button,
menu or shortcut) only the new fill is selected.
Blob Brush Tool Options gain Angle (-180 to 180 degrees, 0 by default)
and Roundness (0 to 100 percent, 100 by default), with a preview of the
tip and three dabs; a drag in the preview square sets the Angle. The
elliptical tip keeps its angle on the page along a stroke, a 0 percent
tip is drawn 0.1 percent as wide as it is long, and Size set to
Pressure still varies its size. path.blob takes angle and roundness,
and both values are kept with the tool's options.
While a non-round tip drags, the Blob Brush shows the outline of the
area it covers with its length label, and an Alt drag that smooths
shows the Smooth tool's thin line.
The art that replaces an outlined or expanded path did not take the
path's hidden, locked or Knockout Shape state. Outline Stroke on a
hidden path, or Expand on a group with a hidden member, made the new art
visible (a filled and stroked path became half visible: the outline
shown, the fill copy hidden), and a locked member's art was unlocked.
The replacement now takes the path's visibility, lock and Knockout Shape
state, and the fill copies and clipping paths inside it are shown and
unlocked, so showing or unlocking the new art shows or unlocks all of it.
This covers Outline Stroke, and Expand's strokes, gradient fills and
pattern fills.
Select > Same > Fill Color and Fill & Stroke from a face of a Live Paint
group now select the matching faces of that group only, and from any
other object they select no Live Paint face. Before, they matched faces
of every Live Paint group and paths outside them alike.
With a blend selected, the Contextual Task Bar's Corner and Smooth
buttons failed with "select paths or anchor points", since
`path.convertAnchors` only read paths. They now convert every point of
the blend's spine, as they convert every anchor of a path selected
whole, in one undo step. The key objects stay where they are.
With Direct Selection, the Control bar and the Properties panel now
show their Convert buttons for a selected blend too.
With Document Swatches as the library, traced fills and strokes take the
library color without a swatch link. Global, spot and tint swatches no
longer link the trace, so editing a swatch later leaves the trace
unchanged, and swatch order no longer decides whether a fill is linked.
Each region still takes the nearest library color, and a tint traces at
the color the tint swatch shows.
With the Live Paint Bucket, Alt-click on vector art samples its fill,
stroke and stroke weight into the paint defaults, and on a placed image
it samples the pixel as a solid fill with no stroke. Alt+Shift-click
samples only the color under the pointer, including an intermediate
gradient color or image pixels, into the active fill or stroke. Neither
click paints or changes the selection or selected art, and the next
Bucket click paints with the sampled paint. While Alt is held, the
Bucket shows the Eyedropper cursor and no face or edge highlight.
appearance.copyFrom takes `defaultsOnly: true` to update only the paint
defaults, and paint.sampleColor takes `clearStroke: true` to clear the
stroke default after an image sample into the fill.
With a path selected that the Smooth tool can change, Alt held at a
Paintbrush press now switches the drag to the Smooth tool: it smooths the
selected paths under the drag with the Smooth tool's radius and Smooth Tool
Options' Fidelity, and the cursor shows the Smooth tool before the press.
Alt pressed after a stroke begins still closes the path on release. With no
such path selected (nothing, only text or an image, or only a two-point
line), Alt at the press draws the closed stroke as before.
The Paintbrush no longer reads the Pencil's "Alt key toggles to Smooth Tool"
setting: its Alt close and Alt smoothing do not depend on it.
Saving a legacy .ai with transparent images flattened expands pattern
fills whose tile image is see-through or has opacity or a blending mode,
so the tile images flatten with the art under them. A pattern whose tile
is an opaque grayscale image with a colorize paint was not expanded, so
the writer drew the source gray pixels over white. A colorize paint now
counts too.
Holding backquote while dragging with the Selection tool (move, bounding-box
scale or rotate) or the Rotate, Reflect, Scale or Shear tool applies the drag
to the selected objects' pattern fills and strokes and leaves their geometry
in place. The key state at release decides the result: the key may be pressed
after the mouse button goes down, and releasing it before the button comes up
commits an ordinary transform. Objects without pattern paint do not move.
PointerEvent gains a `backquote` flag (false when absent). The desktop canvas
reads it from the held key on every pointer event, and `ui.pointer` and the
`pointer_gesture` tool accept it per event or as a default for the gesture.
object.lock.unselected is now reached by its key and as a command only:
the Object > Lock > Unselected Artwork menu item is removed, and the
command stays in the registry, the shortcut editor and automation.
In a partly selected clip group or compound path it now locks the
unselected members, the clipping path included, and leaves the container
and the selected members unlocked. It locks unselected guides while Lock
Guides is on. Hidden art and art on a locked layer stay unlocked, and a
selected layer's art counts as selected.
With a selection in isolation mode the command is enabled and locks only
the unselected art inside the isolated group. The other Lock and Hide
items keep their isolation behavior.
Lock and Hide still share one selector. A lock flag on it selects the
clip group, compound path and guide cases above; Hide > Unselected
Artwork keeps its behavior, and a test covers both directions.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app locks all deselected artwork on Cmd/Ctrl+Alt+Shift+2.
VectorCraft had no command for it: Object > Lock held Selection, All
Artwork Above and Other Layers.
The new command, object.lock.unselected (Object > Lock > Unselected
Artwork), locks in one undo step the objects that Hide > Unselected
Artwork hides: every object that Select All takes and that is neither
selected nor holds a selected object. It returns the count. Hidden
objects stay unlocked. The selection stays as it is, Unlock All unlocks
the objects again and selects them, and with nothing to lock the
command records no undo step. Both commands now share one function,
which locks or hides the objects that the existing unselected helper
returns.
In isolation mode the menu item is disabled, and the command returns
the error "not available in isolation mode" that Hide > Unselected
Artwork returns there, and changes nothing.
Docs: docs/mcp.md, docs/target-app-parity.md.
When a process swatch listed before a global or spot swatch showed the
same color, a traced fill of that color took the process swatch and
stayed unlinked. Of the swatches that trace as one color, the first
linked one now gives the fill, and the first one otherwise.
With the Perspective Selection tool, Ctrl+Alt-drag (Command+Option-drag on
macOS) now copies objects on their perspective plane, as Alt/Option-drag
does. Before, Cmd/Ctrl lent the last selection tool even with Alt held, so
the drag made a flat copy. Cmd/Ctrl alone still lends the last selection
tool, and the cursor follows the same rule.
When Alt switches the Pencil (with Alt key toggles to Smooth Tool on)
or the Blob Brush to the Smooth tool, the drag sent the drawing tool's
own Fidelity (1.5 by default) to path.smoothRegion. The Smooth tool
sends its own Fidelity (2.5 by default, set in Smooth Tool Options).
Both tools now smooth with the Smooth tool's Fidelity. The engine gives
them the stored Smooth Fidelity when it makes the tool, and again when
Smooth Tool Options changes while one of them is active. Each tool's
own Fidelity still sets how its strokes are fitted.
A straight Knife cut now starts only when Alt is held at the press.
Alt pressed later in the drag, even before the pointer moves, leaves
the cut freehand. Releasing Alt during a straight cut keeps it
straight.
With Shift+Alt, the cut keeps to 45° steps from the horizontal and
vertical whatever the Constrain Angle. The Pencil's straight line
still steps from the Constrain Angle.
Tests cover Alt after the press, Alt only at the release, a 90° cut,
a 30° Constrain Angle, and the cut boundaries in the engine.
Docs: docs/target-app-parity.md.
The Knife cut along the freehand drag whatever keys were held. The
reference app cuts in a straight line with Alt-drag, and it cuts at 45
or 90 degrees with Shift+Alt-drag.
With Alt held at the press, or pressed before the drag has moved, the
Knife's stroke is the press point and the pointer: the dashed line
shows it while dragging, and the release sends path.knife with those
two points. With Shift held too, the line keeps to 45° steps from the
Constrain Angle, as the Pencil's Shift line does. Shift is read on each
drag event and at the release. The cut stays straight when Alt is let
go, a line taken back to its press point sends no command, and Shift
alone leaves the cut freehand.
Docs: docs/target-app-parity.md.
paint.invert and paint.complement on the Fill proxy, the Edit Colors
commands, the Blend commands and recolor.apply now recolor the color
that colorizes a grayscale or 1-bit image, as one undo step with the
other targets. Before, they left it unchanged. Expand Appearance and
Object > Expand bake color adjustment effects into that color too.
- A colorized image's pixels are not recolored; they stay the gray
coverage of its color. A stroke-only pass reaches the image's stroke
items and leaves its colorize color unchanged.
- A command that would leave a process color on a grayscale image with
an alpha channel fails with the existing message and changes nothing.
Object > Expand undoes its earlier steps when that happens.
- A colorized image counts as a filled object in a blend.
A colorized grayscale or 1-bit image draws its white pixels transparent and is written to
PDF with the image as a soft mask. Node::shows_transparency did not count it, so a PDF 1.3,
PDF/X-1a or PDF/X-3 export whose only transparency was a colorized image was not flattened
and kept the soft mask. A legacy .ai save also wrote such an image as opaque.
- shows_transparency counts a visible image with a colorize paint.
- The legacy .ai writer flattens or leaves out colorized images like other see-through images.
graphicStyle.addFromLibrary with apply: true and ids: null tried to
apply the style to no objects and failed with "no such objects" when
nothing was selected. A null `ids` now behaves as leaving `ids` out:
the style is applied to the selection when there is one, and only added
otherwise.
swatch.library.load, graphicStyle.loadLibrary, symbol.loadLibrary and
brush.loadLibrary read the whole file or decoded data before checking
`name`, so a call with a `name` that is not a string read the file
first, and with a missing file reported the file error instead of the
parameter error. The shared loader now checks every parameter before it
reads anything.
Alt in a spiral drag now rounds the fitted segment count to whole winds
of four segments, counted from the segment count when Alt went down.
Ctrl/Cmd takes precedence when both keys are held, and switching back to
Alt starts from the current count with the held inner end kept. Arrow
keys, Escape, release and a new drag clear the held Alt count.
Tests cover both keys together, a switch mid-drag, Escape, the 2 to 1000
bounds and the committed path's anchor count. docs/mcp.md and
docs/target-app-parity.md describe the rule.
dotCooCoo