With Use Preview Bounds on, the bounding box, the Transform panel,
Align, Distribute, Distribute Spacing and object.setBounds measured
each object without its geometry effects. A square with Offset Path
10 measured as the square, and type with Outline Object measured by
its layout box instead of its glyphs.
The new vectorcraft_effects::preview module measures objects as they
are drawn. A path is measured by its effected shape, with the
geometry effects of each fill and stroke that paints. Type, images,
live objects and symbol instances are measured by their reshaped art.
A group or layer with geometry or Pathfinder effects, or with a fill
or stroke of its own that has geometry effects or paints members with
geometry effects, is measured by its evaluated art. A blend, envelope
or repeat whose objects have geometry effects is measured by its
evaluated art, with those objects measured after their effects. Raster
effects are not measured. In one object, the art of at most 4,096 symbol
instances is measured with its geometry effects, and the other
instances are measured without them. With Use Preview Bounds off, the
measures are unchanged.
object.setBounds sizes objects with geometry effects by measuring
them after each scale it tries, so type with Outline Object set to
100 pt wide gets a glyph box 100 pt wide.
Selection::anchors_box is split out of Selection::anchor_bounds. The
doc comment of VectorcraftApp::selection_bounds said that it includes
effects; it now says that it leaves them out.
A lone object selected with ruler guides can be the key (the Selection
tool's click on it), and Align to the key moves the other selected
guides to its edge or centre: vertical guides to left, centre or right,
horizontal ones to top, centre or bottom. Parallel guides line up on a
key guide. Aligning to the selection or the artboard leaves guides alone.
A click with the Selection tool on a guide selected with objects makes
it the key (select.key {guide}), drawn thicker; a click on it again
cancels it. Align to Key Object is on with one object and a selected
guide and makes the guide the key. object.align lines the objects (or
selected anchors) up on the guide's line and leaves the guide where it
is: a vertical guide sets x only, a horizontal one y. The selection
keeps key_guide beside key, never both; it goes with the guide or the
objects, and follows the guide when earlier guides are deleted.
Distribute Spacing doesn't space from a key guide.
Every lookup by id walked the whole tree, and the edit path did one per selected id, so editing
a selection of n objects cost O(n²). Measured with the new `perf --deep` rows at 25,000 paths:
- Select All: 458 → 3.5 ms
- nudge the selection: 3,517 → 34 ms
- drag it with the Selection tool, per pointer move: 3,413 → 35 ms
- undo / redo: 407 → 3.1 ms
- vectorcraft_doc: Document::index_paths (every id's index path, in one walk; the first in tree
order for a duplicated id, as index_path), node_at, node_mut_at (copy-on-write, as node_mut)
and ancestry_at.
- apply_transform, roots_of, transform_patterns, doc_sane, Selection::prune and
Document::paint_order look their ids up with one walk instead of one each.
- Selection::set dedups with a hash set instead of Vec::contains per id.
- vectorcraft-cli perf --deep: tracked rows for editing a whole selection (select, nudge, drag,
undo, redo), live effects, every Pathfinder operation, typing in a long story, and memory.
tests_lookups checks the batched lookups against the one-id ones on nested trees with missing and
duplicated ids; storing the last duplicate instead of the first fails it. The doc and engine
suites (2,000 tests) pass unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Selecting two objects, clicking one to make it the key object and then
Shift-clicking the other left the remaining object as the key. The
canvas still drew that object with the thick key-object outline. The
Align panel aligned the object to itself, so the object did not move.
The key is now cleared after any change that leaves no other selected
object outside it, such as a Shift-click, or hiding or deleting the
other object's row in the Layers panel. On a single selected object,
or on a group selected with only its own members, select.key sets no
key.
With one object selected and Align to Key Object chosen, the Align
panel, the Control bar and the Properties panel ran object.align with
to: "key", which fails with "no key object" when the selection has no
key. All three now align a single selected object to the artboard
whatever Align To is set to.
Docs: docs/target-app-parity.md.
- Guides on a hidden or locked layer leave the selection (Selection::prune,
run after every edit and selection change), their Layers rows neither
select nor drag them, and guide.move / guide.remove / guide.setLayer
refuse them; guide.setLayer refuses a locked target layer, as dragged
rows are refused there.
- A new guide goes where new art goes (the current layer, else the top
shown and unlocked one; refused when there is none), so it never lands
on a hidden layer and vanishes.
- Layer commands keep guides with their layers: Duplicate (and Alt-drag
copies of rows) copy a layer's guides onto the copy, Merge Selected and
Flatten Artwork put the merged layers' guides on the merged layer and
Flatten discards a hidden layer's. One shared doc predicate for "the
layer a guide is on"; the deleted-layer cleanup moves into the doc.
- Tests: engine tests for the above and their undo, a doc check that an
old guide reads with no layer and none is written, and a headless
Layers panel test of guide rows (select, drag to another layer, locked).
- Translations for the new message; docs and a ROADMAP progress line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guide rows in the Layers panel drag (the selected guides when the row is
one of them) onto any row of another layer, which lights up, and go to
that layer in one undo step (guide.setLayer takes indexes). Guides on no
layer, from files saved before guides had layers, go on the top visible,
unlocked layer when a document opens or is reverted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
A ruler guide goes on the current layer (guide.add {layer}), shows,
hides, locks and is deleted with its layer, is listed in the Layers panel
as a row that selects it, and moves to another layer (guide.setLayer).
Guides on a hidden layer neither show nor snap; those on a locked layer
can't be picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
A Shift-click on a guide adds it to the selected art (guide.select
toggle keeps the art), and Shift-adding or -removing art keeps the
selected guides; a new selection still clears them. With both selected,
Delete deletes the art and the guides in one undo step (not when ids are
given).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
Clicking an object's target circle in the Layers panel always replaced
the selection, so several objects couldn't be picked there. Shift-click
now adds the object (a layer: its art) to the selection, or takes it out
when it is selected already, as in Illustrator; nothing stays targeted
then. layer.target takes add: true for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of a ruler did not snap at all (only Shift to the ruler's
ticks): they now go through the engine (`Session::ruler_guide`, a
`NewGuide` previewing `guide.add`, one undo step) and snap as a moved guide
does: with Smart Guides to the edges, centres (so the sides' midpoints) and
anchors of the art and of the artboards, labelled; with Smart Guides off,
View > Snap to Point pulls new and moved guides onto anchors. Moving art
with the Selection tool already snapped flush to artboard edges and centres
with Smart Guides on; a test now covers it.
Artboard guides: `Guide.artboard` holds an artboard id (written only when
set, so canvas guides save as before and older files open unchanged).
`guide.add {artboard}` makes one, `guide.list` reports it; a guide dragged
out of a ruler with the Artboard tool belongs to the active artboard. It is
drawn, picked and snapped to across its artboard only, moves with it
(`artboard.move`, a pure move in `artboard.setProps`, `artboard.rearrange`),
is copied with it (`artboard.duplicate`, Alt-drag copy) and deleted with it
(`artboard.delete`, the guide selection kept in step).
Guides as Layers rows with their own lock and hide (part d) stay open: ruler
guides are not layer nodes; Lock Guides locks them all, and Make Guides
paths are Layers rows already. Listed in the ROADMAP parity row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Guides dragged out of the rulers could not be touched again: no tool hit-tested
them, so a click on a guide went to the art under it.
- The Selection, Direct Selection and Group Selection tools pick a ruler guide
within the selection tolerance (over the art; Direct Selection takes an
anchor on it first) through a shared tools::rulerguide::GuideEdit. A drag
moves the selected guides in one undo step (Alt copies them, Shift snaps the
dragged one to the ruler's ticks, otherwise it snaps to pixels, the grid or,
with Smart Guides, the art's edges, centres and anchors); dropped off the
canvas onto its ruler, the guide is deleted. Hidden or locked guides can't be
picked; the pointer shows which way a guide moves.
- Selection::guides holds the selected guides (on their own, like slices); the
canvas draws them in the selection colour. Delete/Backspace (edit.clear)
delete them, the arrow keys (object.nudge) nudge them, Lock Guides and Hide
Guides deselect them.
- Commands for agents: guide.list, guide.select {indexes, toggle?},
guide.move {dx?, dy?, copy?} (besides {index, pos}) and guide.remove {index?};
guide positions out of range are refused. Documented in docs/mcp.md.
- Shift while dragging a new guide out of a ruler snaps it to the ticks too
(Unit::ruler_step, shared with the rulers' drawing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Art in a sublayer is now selected as objects (clicks, marquee, Select All, the
Select menu), sublayers select in their own colour, and hidden, locked or
template sublayers block clicks. Layer Options gain Preview (per-layer outline)
and Dim Images. New and fixed layer.* commands for the Layers panel: setCurrent
and highlight (rows at any depth), selectAll, move (reparent with cycle and
nesting checks, Alt copies), delete/duplicate rows, merge, flatten, collect,
release to layers, reverse, template, hide/outline/lock others and their
show/preview/unlock all, locate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Window > Asset Export lists the document's assets as thumbnails: art
dragged in off the canvas (or added with +) becomes one asset per object,
or one of them all with Alt; Object > Collect for Export does the same.
Assets name their objects, so they follow edits (moving the art moves the
crop) and deleting the art removes it from its asset. Click selects,
double-click renames, the bin removes. The panel's export settings are
Export for Screens' own format rows on the document's shared settings, and
Export writes each asset alone, cropped to its art, into a picked folder
(the web downloads a zip). Export for Screens' Assets tab lists the assets
with checkboxes and exports the checked ones.
Commands: assets.add, assets.remove, assets.rename, assets.list,
assets.export, assets.settings.set; document.exportForScreens takes
assets. Model: Document.assets (ExportAsset {id, name, nodes}).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document.slices holds user slices, Node.slice makes an object an object
slice that follows its bounds, and Document.slices_clip_to_artboard picks
the region auto slices fill (the artboards, or the art and the slices).
Object → Slice: Make, Release, Create from Guides, Create from Selection,
Duplicate, Combine, Divide… (dialog), Delete All, Slice Options… (dialog)
and Clip to Artboard; View → Hide/Lock Slices; Select → Object → Slices;
slice.list reads the numbered layout. The canvas draws the slices in the
Slices preferences' line colour with their numbers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clicking a Layers panel target circle runs `layer.target {id}`: a layer gets its art
selected and becomes the target (`Selection.target`) of the appearance, effect,
transparency and opacity-mask commands, which then edit the layer itself; the
Appearance panel lists it. Dragging a circle onto another runs
`appearance.transfer {source, target, copy?}` (Alt copies), dropping it on the trash
clears it. Filled dots also mark groups and layers with fills of their own, masked
objects get a dashed underline, and while an opacity mask is edited the panel lists
only an `<Opacity Mask>` entry and the tab says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
bflatastic