Pen Cmd-borrow keeps Direct Selection when Alt is held so guide copy and other Alt modifiers on the lent tool still work.
Co-authored-by: Cursor <cursoragent@cursor.com>
When Direct Selection was last used or is active, Cmd+Alt borrows Group Selection for pointer presses, matching the documented modifier chord.
Co-authored-by: Cursor <cursoragent@cursor.com>
A Word paragraph justified with w:jc lowKashida, mediumKashida or
highKashida placed as plain justified type, and its kashida length was
dropped. ECMA-376 Part 1, 17.18.44 (ST_Jc) gives these values a
slightly longer, a medium and the widest kashida length.
Such a paragraph now places justified with Insert Kashidas set to
Short, Medium or Long. A paragraph justified with both, and every other
alignment, still places with Insert Kashidas set to None. VectorCraft
writes no Word or RTF files, so this change does not affect export.
Docs: docs/mcp.md, docs/target-app-parity.md.
The PDF writer's metadata has no copyright fields, so the XMP packet of
PDF exports and PDF-compatible .ai and .ait saves left out File Info's
copyright status, notice and URL. A PDF exported without its editing
data opened with the status Unknown and an empty notice and URL,
although the reader takes them from dc:rights, xmpRights:WebStatement
and xmpRights:Marked.
The export now adds those three properties to the XMP packet after
the writer has written it, as it does for the modification date.
Marked is True for Copyrighted and False for Public Domain, and is left
out for Unknown. The notice and URL are escaped for XML, and characters
XML 1.0 does not allow are left out. A document without a copyright
gets none of the properties.
Docs: docs/mcp.md (File Info), docs/target-app-parity.md.
The Print dialog's Media list only had Letter/Legal/Tabloid and the ISO A
and B papers, so Japanese papers had to be entered as a custom size, and
"B4"/"B5" were ISO 216 (250 × 353 and 176 × 250 mm) although Japanese
printing uses the JIS sizes (257 × 364 and 182 × 257 mm, JIS X 6310).
Media gains JIS B4, B5 and B6 next to the ISO ones, and はがき
(japanese postcard, 100 × 148 mm), 往復はがき (japanese double postcard,
148 × 200 mm), 封筒 長形3号/長形4号 (japanese envelope #3/#4, 120 × 235
and 90 × 225 mm), 角形2号/角形3号 (kaku #2/#3, 240 × 332 and 216 × 277 mm),
四六判 (yonroku-ban, 127 × 188 mm) and A6, all in millimetres at 72/25.4.
b4 and b5 keep their ISO 216 dimensions so print settings and presets
saved before the Japanese papers existed keep their paper; the dialog
labels say "B4 (ISO)"/"B5 (ISO)" beside "B4 (JIS)"/"B5 (JIS)".
A paper is named by its JSON id or by its dialog label, any case and
spacing ("b5 (jis)", "B5 (JIS)" and "b5jis" all mean the JIS B5), so
agents and the control channel need not know the id spelling; an unknown
name is still refused. Media is written out instead of through the
choice! macro to carry that lookup.
The print.setup/file.print parameter docs and docs/mcp.md list the new
papers; the Print dialog picks them up from Choice::ALL with no UI code
change, and the Japanese labels are translated in ja.tsv (はがき,
往復はがき, 長形3号, 長形4号, 角形2号, 角形3号, 四六判).
Tests: japanese_paper_sizes checks every added size in points, that the
ISO B4/B5 values did not change, name resolution and id/label round
trips, and that each paper prints a PDF page with its own MediaBox size.
Validation: cargo fmt --all -- --check clean; cargo clippy
-p vectorcraft-pdf --all-targets -- -D warnings clean; cargo test
-p vectorcraft-pdf -> 330 passed, 0 failed (328 lib + 2 integration).
**What:** Illustrator type styled through the Appearance panel came in as its drawn look (outlined compound paths). Comic and "text effect" templates are the common case, and the type couldn't be retyped. This keeps it as editable type with the style as a live VectorCraft appearance.
**Changes**
- **Art styles parsed as a tree.** Compound filters close at their `;`, basic ones at `/Part`. Each fill and stroke in a stack keeps its own effects, opacity and blend mode, and object-level effects stay on the object.
- **Type keeps any plain stack.** That covers several fills and strokes, pattern and gradient fills, Warp, Offset Path, Transform with copies, Drop Shadow, Outer Glow, Feather, Gaussian Blur and Bas Relief. Bas Relief settings are left at their defaults, because Illustrator stores them in a Photoshop plug-in's binary block. Gradients and patterns are placed as the drawn look places them. Other objects keep the existing plain-style rule, since their drawn look is the more faithful option.
- **Point type without a frame matrix.** Illustrator 24 omits the matrix when point type is neither rotated nor scaled. Such stories were left out entirely; they're now read with an identity matrix.
- **Page comparison.** The page's rendering of a style isn't held to match VectorCraft's live rendering where the replaced drawn look lay, and styled made type isn't pruned as unseen.
- **EPS override.** `editingData: "always"` / `convert --editing-data` now applies to Illustrator EPS as well as `.ai`.
**Tests:** 6 new tests, written from scratch; `vectorcraft-eps` passes all 298 on current main. clippy `-D warnings` and rustfmt are clean for eps, engine and cli. `docs/file-format-parity.md` has been updated, including its revision history.
**Clean-room note:** I found the bugs with a user's licensed stock EPS, used locally only; nothing from it is committed. Filter and key meanings come from the public Illustrator Effect docs and public LiveEffect scripting examples (`jntp`, the Warp style order).
**Not included:** VectorCraft's pixel effects treat transparent content as empty instead of using Document Raster Effects Settings › Background (white by default). Because of that, Bas Relief on a transparent pattern gives flat grey. That needs a separate renderer change.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
When two or more frames stayed in the thread, the first got the whole story while the others kept their shares, so the re-flow joined those twice. The frames after the first now start empty, and the story flows through them once.
Illustrator links type in an area or along a path (https://helpx.adobe.com/illustrator/using/manage-text-area.html); until now only area type threaded here. Type on a path that overflows ends its line where its text stops fitting, so a story flows on from it, and its red out port, just past its end bracket, loads the Selection tool with the text as area type's does. A new frame threaded from it at a point is type on a path of its shape.
Optical Margin Alignment and Roman Hanging Punctuation left every
right-to-left paragraph of point and area type, and type on a path
whose first paragraph runs right to left, as it was: the quotation
marks, full stops and commas at the ends of its lines stayed inside
the margins.
A right-to-left line now hangs at the margins its alignment places it
against, as a left-to-right line does. Auto aligns a right-to-left
line at its right, so it hangs there. The line is read from right to
left: where it hangs at its left margin, a full stop and the quotation
mark after it that end the line hang together. In vertical type,
where the characters of a right-to-left paragraph run from the top
down, the pair is read from the top.
Type on a path whose first paragraph runs right to left hangs at its
brackets by the same rule. In horizontal type, Auto places it at the
end bracket, so it hangs there. On a closed path, its hang at the end
bracket gets the space between the end and start brackets before its
hang at the start bracket does, as in right-aligned type.
A justified right-to-left line of one word is spread between its
letters as they are drawn. The gap after each letter went to the
letter that follows it in the text, so the two leftmost letters
touched and the word ended one gap short of the right margin.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Delete Brush and a rename in Brush Options changed only the strokes in
the layers. Strokes in symbol definitions, graph designs, pattern
tiles, opacity masks, graphic styles and the art of other brushes kept
the old brush name. After a rename they drew as plain strokes, and
after a delete a brush made later with the same name painted them.
brush.delete and brush.options with newName now rename the brush, or
clear it, in every stroke in those places, and in the tile that
pattern editing's Cancel puts back. Only the objects that change, and
the groups that hold them, are copied. It is still one undo step.
Docs: docs/target-app-parity.md.
Art evaluated from an object can hold one id more than once until the
pieces get ids of their own. The reply then named a repeated id by the
new id of its first node: for a square with a random Transform on its
stroke, in a group whose Transform effect copies it, the reply listed
the copies' group instead of the two copies. An object with a color
adjustment and crop marks was listed twice.
The expansion now records each object it lists with its place in the
art, and the new ids are taken from those places. An object is listed
once.
Random in a Transform effect takes its seed from the object's id. When
art evaluated from an object repeats ids (the copies a Transform effect
makes, a copied group's members included, and the object under Crop
Marks), Expand Appearance and the baking in bake_document gave the
pieces new ids before expanding or baking their effects. The result
then drew with other random values than the canvas did: on main, 2,382
to 5,205 pixels of a 200 x 200 render changed after Expand Appearance,
and 7% to 14% after Flatten Transparency, for 50 pt squares with a
random Transform on their stroke, on their group or under Crop Marks.
bake_pieces now bakes each piece with the ids it has and gives new ids
after. expand_pieces expands the object's own pieces, and the other
members that repeat an id and hold a random Transform, before their
ids change. Expand Appearance now expands a node value
(expanded_node). The Crop Marks branch expands the object before the
object and the marks get new ids. The reply still lists the expanded
object first, then what was expanded inside it.
The reference app reorders a brush that is dragged to a new place in
its Brushes panel, among the brushes of its type only. VectorCraft's
Brushes panel could not reorder brushes, and no command moved one.
brush.move {name | names, to?, type?} moves brushes to index to among
the brushes of their type, in brush.list order, as one undo step. A
move that keeps the order records no step. Brushes of different types,
or a type other than theirs, are refused with "brushes move only within
their type". In the Brushes panel, a brush dragged onto another brush
of its type goes before or after it by the half of the tile or row
under the pointer, and a bar marks the slot while it is held there. A
brush dropped on a brush of another type stays where it is, and the
status bar shows the refusal.
Docs: docs/mcp.md, docs/target-app-parity.md.
Recovery copies are unsaved documents. FolderStore made its folders with
create_dir_all, so on Unix they got the default mode and other accounts on
the machine could read the copies. Folders the store creates are now 0o700.
A store folder that already exists (it can be one picked in Preferences)
keeps its mode; the area made inside it is owner-only.
The same change as storytold/pdfcraft#3320.
With Use Preview Bounds on, a bounding-box handle drag scaled the art by
the ratio of the visual box, so margins that stay (a stroke with Scale
Strokes & Effects off, an Offset Path reach) or scale by another factor
moved the opposite visible edge: dragging the right edge of a square with
Offset Path 10 from 210 to 310 left its left edge at 98.33 instead of 90.
The Selection tool now previews object.setBounds with the dragged visual
size and the opposite handle (with Alt, the center) as the reference
point, so the scale is solved from the geometric box and the margins the
visual box adds, for strokes with Scale Strokes & Effects on or off and
for geometry effects. Shift and Alt drags follow the same rule; a drag
that flips the box, and one with anchors selected, still scale by the
matrix. A previewed object.setBounds runs as object.transform with the
transform it finds, so Transform Again repeats the drag and the journal
holds that transform. The drag transforms a path of a compound path
selected on its own, as object.transform does, and leaves the art at
least 1e-4 of its width and height.
The renderer clips a clip group by its clipping path's geometry before
the path's geometry effects, and paints the path's strokes over the
clipped art without clipping them, with those effects. With Offset Path
on a stroked clipping path, the stroke paints along the offset shape
while the group was measured by the path's own stroke.
With Use Preview Bounds on, a clip group or layer whose clipping path
has strokes with geometry effects is now measured as the clipping
path's geometry and those strokes as drawn, in the Transform panel, the
bounding box, Align and Distribute. This holds inside groups and for a
clip group with a fill or stroke of its own. A clipping path
without a stroke still measures as the region it clips to, and a hidden
one adds no stroke.
With Use Preview Bounds on, every hover frame's cursor and every
pointer move measured the selection again, and with Smart Guides on
each selected object too, evaluating their geometry effects each time.
The session now keeps a PreviewMemo, which ToolContext::preview_memo
passes to the tools. selection_bounds, selection_box and the object
bounds that Smart Guides find centers in while hovering read it. The
memo holds the measurements for one key: the document's uid and
revision, the selected objects and Use Preview Bounds. A new key
replaces them. VectorcraftApp::selection_box in the UI keys on the
uid, the revision and Use Preview Bounds. A ToolContext without a
memo measures on every call.
With Use Preview Bounds on, the bounding box, the Transform panel,
Align, Distribute, Distribute Spacing and object.setBounds measured
each object without its geometry effects. A square with Offset Path
10 measured as the square, and type with Outline Object measured by
its layout box instead of its glyphs.
The new vectorcraft_effects::preview module measures objects as they
are drawn. A path is measured by its effected shape, with the
geometry effects of each fill and stroke that paints. Type, images,
live objects and symbol instances are measured by their reshaped art.
A group or layer with geometry or Pathfinder effects, or with a fill
or stroke of its own that has geometry effects or paints members with
geometry effects, is measured by its evaluated art. A blend, envelope
or repeat whose objects have geometry effects is measured by its
evaluated art, with those objects measured after their effects. Raster
effects are not measured. In one object, the art of at most 4,096 symbol
instances is measured with its geometry effects, and the other
instances are measured without them. With Use Preview Bounds off, the
measures are unchanged.
object.setBounds sizes objects with geometry effects by measuring
them after each scale it tries, so type with Outline Object set to
100 pt wide gets a glyph box 100 pt wide.
Selection::anchors_box is split out of Selection::anchor_bounds. The
doc comment of VectorcraftApp::selection_bounds said that it includes
effects; it now says that it leaves them out.
Double-clicking the Shape Builder tool reported that the tool has no
options. The reference app opens Shape Builder Tool Options there.
The dialog sets Consider Open Filled Paths as Closed, Pick Color From
(Artwork or Color Swatches), Cursor Swatch Preview, Selection (Freeform
or Straight Line) and Highlight Fill. The defaults keep today's
behavior. With Consider Open Filled Paths as Closed off, a filled open
path cuts regions as an unfilled one does. With Color Swatches, a merge
fills the new shape with the current fill, and the Left and Right arrow
keys step the current fill through the document's color swatches.
Cursor Swatch Preview shows the current fill and the swatches before
and after it above the pointer. With Straight Line, a drag merges what
the line from its first point to its last crosses. With Highlight Fill
off, merge mode shades no regions.
The options persist like other tools' options. shapeBuilder.merge
takes openFilledAsClosed and pickColorFrom, and shapeBuilder.regions
takes openFilledAsClosed. Gap Detection, "In Merge Mode, Clicking
Stroke Splits the Path" and Highlight Stroke When Editable are not part
of this change.
Docs: docs/mcp.md, docs/target-app-parity.md.
Holding Alt while drawing with the Paintbrush, or with the Pencil while
Alt key toggles to Smooth Tool is off, closes the path at the release,
but the cursor did not change. The reference app's Paintbrush shows a
small loop while Alt is held, and its Pencil shows a small circle.
Cursor::PaintbrushClose and Cursor::PencilClose show while Alt is held
with the Paintbrush, and with the Pencil while that option is off,
before the press and while drawing. Both tools still borrow the
crosshair, so the closing cursors are drawn as that crosshair with the
PenClose ring. Use Precise Cursors turns them into the plain crosshair,
as it does PenClose.
With Alt key toggles to Smooth Tool on, the Pencil shows the Smooth
cursor while Alt would smooth: with Alt held before a stroke begins to
draw, and through a smoothing drag even after Alt is let go. Before, it
showed the Smooth cursor whenever Alt was held, also during a stroke
that kept drawing, and not during a smoothing drag once Alt was let go.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
With View › Snap to Grid on, a whole object moved with the Selection,
Group Selection or Direct Selection tool landed on the grid by
whichever of its two edges or its center was nearest a gridline on
each axis. An object on the grid whose width is an odd number of grid
steps has its center half a step between gridlines, so a short drag
could pull it half a step off the grid: on a 20 pt grid, a 100 pt
square at (100, 100) dragged by (8, 8) moved by (10, 10).
A move now lands the nearer of the two edges on a gridline on each
axis, as the reference app's help describes, and the center no longer
snaps. The square above stays at (100, 100). This changes the rule #769
chose for #740. The plain move and the Shift-constrained one both use
grid_pull, so both change.
Docs: docs/target-app-parity.md (Drawing aids).
object.isolate on a Shaper Group isolates the group's source group, but
the hidden and locked check ran on the Shaper Group itself, so a source
group hidden or locked with object.setProps was still isolated. The
check now runs on the object that isolation mode enters.
A click with the Selection tool does not select a hidden or locked
object, an object in a hidden or locked group or layer, or a guide path
while Lock Guides is on, but object.isolate isolated each of them. Once
a locked or hidden group, or a group on a locked or hidden layer, was
isolated, a Selection tool drag moved the member under the pointer. The
Layers panel's Enter Isolation Mode sent the same command for a locked
or hidden layer or group.
object.isolate now refuses a hidden or locked object, or one in a
hidden or locked group or layer, with "the object is hidden or locked"
(the text of layer.target), and a guide path while Lock Guides is on
with "guides are locked". Isolation mode stays off, and the selection
stays as it is.
Docs: docs/mcp.md.
- ui-egui: the font-install poll (#2576) only runs on native builds, but its
timestamp field, its initializer and FONT_INSTALL_POLL were compiled for
wasm too, where nothing read them. They're gated like the code that reads
them.
- engine: `Session::store_profile` is only called by the native Load
Profile (cmd/colormgmt.rs); gated the same way.
- app (macOS): `App::logic_frame` checked `!file_dialog_open()` twice, one
`if` nested in an identical one, with the comment repeated. One check.
`cargo xtask wasm` runs `cargo check` without `-D warnings`, so these
warnings didn't fail CI; after this change it prints none.
Optical Margin Alignment and Roman Hanging Punctuation hung punctuation
in point and area type only. Type on a path kept its first and last
glyphs inside its brackets with either option on.
When Optical Margin Alignment is on, or the first paragraph has Roman
Hanging Punctuation on, the glyphs at the ends of left-to-right type on
a path now hang outside its brackets by the same amounts, measured
along the path. The type hangs at the start bracket when its line is
placed there, hangs at the end bracket when the line is placed there,
and hangs at both when it is centered. Glyphs that hang past the end
bracket do not make the type overflow. On an open path a hang stops at
the path's end, and on a closed path the two hangs together take at
most the stretch between the end and start brackets. SVG export writes
type on a path that hangs as outlines, with a warning.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
The reference app justifies Arabic text with kashidas, set per paragraph
with the Paragraph panel's Insert Kashidas list (None, Short, Medium,
Long, Stylistic). VectorCraft had no kashidas, so a justified Arabic
line was spaced out at its word spaces like a Latin one.
The Paragraph panel, with the Indic options shown, now has Insert
Kashidas. On a justified horizontal area type line that is shorter
than its measure, each Arabic word with joined letters gets one kashida
between its last pair of them, drawn as tatweels (U+0640) in the font
of the letter after it. The kashidas share the line's room equally,
each at most a quarter of an em (Short), half an em (Medium) or an em
(Long); a Stylistic kashida is a row of the font's own tatweels, up to
an em. The word spaces take the room the kashidas leave, so the line
keeps its width, and line breaks do not change. The letter after a
kashida advances over it, so the caret before that letter, a selection
of it and a click on it take the kashida in. None, the default, leaves
lines as they were.
In horizontal type that is not on a path, the caret in a letter drawn
with several glyphs (a letter with a vowel mark) is now placed by the
whole letter, as hit testing already measured it, instead of by its
first glyph.
text.setFormat takes kashida. The setting is saved with the paragraph
only when it is not None, paragraph styles carry it, and Reset Panel
sets it back to None.
Docs: docs/mcp.md, docs/target-app-parity.md.
Using a library's character or paragraph style, and scrubbing a
numeric field, closed their undo step with Session::end_undo_group,
which closes the open undo group of every document. An undo group open
in another document, such as one begun with edit.undoGroup.begin for
an MCP command_batch with atomic, was closed too, and that document's
next edits became undo steps of their own. When the style failed to
apply, or Escape ended the scrub, the other document's group was
canceled as well and the edits made in it were undone. Inside an undo
group already open in the same document, a scrub closed that group,
Escape undid the edits made in it before the drag, and a style that
failed to apply left the style it had added.
Session::begin_undo_scope and end_undo_scope make the edits in between
one undo step of the active document: the scope opens an undo group
there, or joins the one already open. Ending a scope closes only the
group it opened, in its own document, even when another document
became active in the meantime, and a canceled scope undoes only its
own edits, also inside a group that was already open. library.use and
the scrub use the scope, so Escape inside an open group also takes
back a scrub of the Transform panel's Shear field. edit.undoGroup.end
still closes the open group of every document.
When a cancel removes journal entries numbered below a recording's
start, the entries after them are numbered down. The recording's start
and the journal's hold kept the old number, so Stop Recording left out
as many of the recorded steps as there were entries removed, and the
hold no longer covered them. `Journal::remove` now moves the hold down
with the entries, and Stop Recording reads the start from the hold.
`Journal::replace` puts an entry in place of another and counts it at
its new size. A cancel uses it for the `document.activate` that takes
the place of a canceled group's entry that switched documents, so the
journal's size estimate does not keep the old entry's size.
A cancel cut the journal back to where the first canceled group began.
That also removed the commands run in other documents after it began,
which the cancel does not undo, so a replay of the journal lost them.
Each undo group now keeps the numbers of its own journal entries: the
commands that start and end in its document and the commands that edit
it. A cancel removes only those entries, and the later entries are
numbered down to close the gaps (`Journal::remove`). An entry of a
canceled group that also switched to another document, such as a batch
that draws and then activates another document, is replaced by a
`document.activate` of that document, so the commands after it replay
in the same document.
Session::end_undo_group with cancel cancels the open undo group of
every document. edit.undoGroup.end with cancel calls it, and so do a
field scrub ended with Escape and a library style that fails to apply.
The journal was then cut back to where the group of the last document
in the document list began, not to where the first of the canceled
groups began. When the group that began first belonged to an earlier
document, the journal kept the commands of that group's edits, which
the cancel had undone. After a scrub ended with Escape, which journals
no end command, replaying the journal drew those edits again.
Session::end_undo_group now cuts the journal back to the earliest start
of the groups it cancels.
The reference app's graphs help describes adding totals to a column
design: type in the design holds a percent sign followed by two digits.
VectorCraft drew that type as typed, stretched with the design.
Type in a column design that holds a % followed by two digits now shows
the value of each column or stacked segment in place of the % and the
two digits. The first digit is the least number of places before the
decimal point, with zeros added in front (0 for as many as the value
needs), and the second is the number of places after it. Values are
rounded half away from zero. The type keeps its own size and moves to
where the design's copy puts the point it is set from. A repeating
design shows it once per column, where a whole copy ending at the value
end puts it, and Chop Design does not cut it. A sliding design moves it
with the part of the design on its side of the guide. Type inside a
group that clips or has its own opacity, blend mode, appearance or
opacity mask, or inside a blend, compound shape, envelope, repeat or
intertwine, stays in the design and shows the value in each copy. Type
inside a symbol stays as typed. The legend swatch leaves the totals
out.
Docs: docs/mcp.md, docs/target-app-parity.md.
object.objectsOnPath.attach took a path inside a compound path, blend,
envelope, repeat or Intertwine group, or a clipping path, as the path
and put it into the new Objects on Path group, so it was no longer a
part of its container. As objects, a blend's key path, a repeat's
source art, an envelope's content and a clipping path were put into
the new group the same way.
The Objects on Path tool highlighted a blend's key path or a clipping
path and attached the selection to it.
objects_on_path::held now finds the container that holds an object.
The command refuses such a path or object with a reason, and the tool
does not highlight it or attach to it. A member of a compound path
given as an object still attaches as its whole compound path. The four
new messages have rows in every complete-message catalog.
Docs: docs/mcp.md (Objects on Path).
Object › Live Paint › Merge built the merged group anew and copied
only the bottom Live Paint group's name, opacity and blend mode, so
its lock, visibility, appearance, opacity mask, graphic style link and
other properties were lost. Make with a Live Paint group selected, and
a Live Paint Bucket click on a selected path beside a selected Live
Paint group, made a new group with a new id instead, and every face
took the fill of its paths again.
Merge now starts from the bottom Live Paint group, as Gap Options
does, and replaces only its faces, edges and paths and its Gap
Options. Make, and livePaint.fill with ids when the point is outside
that group's faces, add the other objects to the bottom Live Paint
group among them as Merge does.
Docs: docs/mcp.md, docs/target-app-parity.md.
An edge hidden on its own (for example with Object > Hide) while its
Live Paint group stays visible could still be highlighted, selected or
stroked, and a hidden edge nearer the pointer kept a visible one from
being picked.
lp_part_at now takes the nearest visible edge (visible_edge_near), inside
and outside the faces, for the hover, the Live Paint Selection click and
the Bucket's Shift-click. The Bucket's Shift-click sends nothing where no
edge is highlighted, and livePaint.strokeEdge also skips hidden edges, so
the Bucket strokes the edge it highlights.
Distribute Objects and Distribute Spacing space the selected ruler
guides across the axis (vertical ones for the horizontal options,
horizontal ones for the vertical options) together with the selected
objects, as items with no size. Guides along the axis stay where they
are. Two or more guides selected without objects are enough, and the
Align panel's Distribute buttons are enabled for them. With Align to
Artboard, the outermost items go to the artboard's edges.
A key guide (select.key {guide}) is one of those items. With a spacing,
it stays put and the other items are spaced from it, as from a key
object with no size; a key guide along the axis leaves everything where
it is. The Align panel sends the Distribute Spacing value with both
rows of Distribute buttons while a guide is the key, and enables the
value for it.
brush.new and brush.options refused a Hue Shift colorization given
without a key color ("invalid brush: missing field `key`"), and only
Brush Options picked a default. The reference app's Brushes page says
that by default the key color is the most prominent color in the art.
A Hue Shift colorization without a key now takes the solid color that
the art's fills and strokes use most, the first one found on a tie, or
black when the art has no solid color, as Brush Options already does.
Brush definitions read from a document get the same default.
brush.options replaced each field its params named, so an edit that
gave only the colorization method or only an art brush's start guide
was refused because the key or the end guide was missing. It now
merges colorization and an art brush's scale field by field.
Docs: docs/mcp.md, docs/target-app-parity.md.
Document Info had no Brushes category, and document.info refused
category "brushes". The reference app's Document Info panel menu lists
Brushes after Graphic Styles.
Document Info now has a Brushes category after Graphic Styles. For the
whole document it lists the Brushes panel's brushes. With Selection
Only it lists the brushes that the selected objects' strokes use, each
once. document.info gives the names as brushNames, the panel's flyout
offers the category, and the text report that Document Info › Save…
and File › Package write has a BRUSHES section.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's View menu has Show Live Paint Gaps, which
highlights the gaps in the selected Live Paint group based on the gap
options set for that group. VectorCraft had no such item.
View > Show Live Paint Gaps (view.livePaintGaps) turns the highlight
on or off, and the item reads Hide Live Paint Gaps while it is on.
While it is on and edges show, the canvas draws the gaps of each
selected Live Paint group up to its Paint Stops At size, the gaps that
livePaint.info lists. It draws them as the Gap Options preview does,
as lines in the group's Gap Preview Color. The setting works as View >
Hide Text Threads does: one setting covers every document, it is saved
with the interface state, and Hide Edges hides the gaps. It is off by
default.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's Brushes panel menu has Select All Unused, which
selects the brushes that are not used in the document. VectorCraft's
Brushes panel menu had no such item, and no command listed the unused
brushes.
brush.unused (Select All Unused) is a query that lists, in library
order, the brushes no stroke paints with. Strokes in the art and its
opacity masks, in symbols, graph designs, pattern tiles and graphic
styles count, and so do strokes in the art of a brush that is used.
The art of a brush that is not used does not count, so a brush whose
own art is the only art that paints with it is listed, and so is a
brush used only in the art of an unused brush. The Brushes panel
menu's Select All Unused selects these brushes, and Delete Brush and
Duplicate Brush then act on them.
Docs: docs/mcp.md, docs/target-app-parity.md.
Select > Object > Bristle Brush Strokes selected the objects whose
brush name contains "bristle". It missed objects with a bristle brush
of any other name, and it selected objects whose brush is of another
type with "Bristle" in its name.
select.object.bristleBrushStrokes now looks up the brush of each
object's topmost stroke in the document's brush library and selects the
object when the brush is a bristle brush, whatever its name.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app adds a new fill with Ctrl+/ on Windows and Command+/
on macOS, and it adds a new stroke with Ctrl+Alt+/ on Windows and
Option+Command+/ on macOS. VectorCraft had Add New Fill and Add New
Stroke on the Appearance panel, with no default key for either.
appearance.addFill now has the default Cmd+/ and appearance.addStroke
has Cmd+Alt+/, which are Ctrl+/ and Ctrl+Alt+/ on Windows and Linux.
Like the panel's buttons and menu items, each key runs its command with
no params and adds the item to every selected object. Keyboard Shortcuts
lists both under Window › Appearance with their keys, and press_key
runs them for agents.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
