- PDF/X-1a, PDF/X-3 and PDF 1.3 files leave the layers they don't print
out of the flattening. A flattened group no longer takes the place of
art in a layer that doesn't print, so the art of a clipping layer over
such a layer prints, and art of a layer that doesn't print stays out
of the file.
- A flattened group goes into a lower layer only when that layer prints,
shows and is a template as the clipping layer does, the clipping layer
and the groups it leaves have no opacity, blend mode or isolation, and
the clipping path has no fill. Otherwise the group holds only the art
inside the clipping layer, drawn over the clipping path's fill and the
art below, and the art below is flattened on its own. Before, the fill
covered the group, the group lost the layer's opacity, or the clipping
path cut the art below.
- Transparent art that a clipping path hides entirely, such as one of
area type holding only a space, is removed. Before, the export failed
because the art kept its transparency.
Object › Flatten Transparency follows the same rules. Documents without
clipping layers or layers that don't print export the same bytes as
before.
Flattening for PDF/X-1a, PDF/X-3, PDF 1.3 and EPS rasterized a picture,
gradient, pattern, mesh or raster effect over its whole frame when a
clipping mask cropped it. The hidden part came out as opaque white and
covered the art under it, on the same page and on the next one.
- Flattening rasterizes clipped art only where its clipping path shows
it, nested clip groups included.
- Art in a clipping layer is flattened as the layer's clipping path
shows it. A flattened group that also holds art from outside the
layer takes the place of that art, so the layer's clipping path no
longer cuts it.
Documents in which no clip group hides flattened art, and no clipping
layer holds it, export the same bytes as before.
transparency.makeOpacityMask read `clip` and `invert` with bool_or,
transparency.setOpacityMask read `clip`, `invert`, `disabled` and
`linked` with as_bool, and the New Opacity Masks and page toggles read
`value` with bool_or, so a value of the wrong type was dropped:
"clip": "false" made a clipping mask, "invert": "yes" next to another
flag was ignored, and "value": "on" toggled the page knockout group.
They are now read with switch_or, and such a value is an error that
names the param, before anything changes. Omitting a param or giving
null keeps its default.
object.path.offsetPath, object.path.simplify, object.path.splitIntoGrid,
object.path.cleanUp, object.pathfinder.trap and addon.contour.set read
their params with helpers that fell back to the default for a value of
the wrong type: "offset": true offset by 10 pt, "joins": 3 gave mitered
joins, "addGuides": "yes" added no guides. Each such value is now an
error naming the param, and the document and the undo history stay as
they were. An omitted or null param keeps its default, and a distance
still takes a string with a unit ("5 mm"). An unknown `joins` name is
refused as well.
Make Compound Path leaves each member's graphic style id in place. A
member copied or cut on its own took the compound's appearance but kept
that old id, so the clipboard carried an unrelated style and the pasted
path was linked to a style that did not match its look.
The copied member or piece now takes the compound's link while it has
that style's look, and no link otherwise (no style on the compound, or
a gradient pinned to the compound's bounds). It also takes the
compound's knockout setting with the rest of its transparency.
object.expand read `object`, `fill` and `stroke` with bool_or, `steps`
with f64_or and `gradient` with str_param, so a value of the wrong type
fell back to the default: "fill": "yes" expanded the fill, "steps": "16"
made 255 strips and "gradient": 3 made strips. They are now read with
switch_or, number_or and text_param, and such a value is an error that
names the param, before anything changes. Omitting a param or giving
null keeps its default.
A call whose arguments hold a file or folder key at any depth, such as an
effect's textureImage.path, is refused before the command runs; the walk
keeps its own stack. Each call also runs with automation file access
confined to no roots, so every checked read or write a command makes is
refused, whichever param carried the path.
Create Gradient Mesh, a Mesh tool click and Object > Expand of a gradient
to a mesh gave each border edge one cubic fitted between two mesh points
and picked the corners from the bounding box, so the border cut off
corners and curves: 49 pt off a five-point star, 54 pt off a notch.
- The border follows the outline of the largest subpath by length; border
points sit on it and an edge with no anchor inside is the exact piece
of its segment.
- Where no single cubic follows a run within 0.1 pt (a thousandth of the
size on a small outline), a mesh line goes through an anchor, the
sharpest corner first; at most 256 lines each way. Rectangles and
ellipses keep the rows and columns asked for.
- Smooth runs keep their end tangents; border handles are no longer made
collinear.
- To Center and To Edge highlight placement accounts for the extra lines
(for_path_shaded, also used for gradient fills).
- Non-finite points give no mesh; a degenerate outline keeps the old
bounding-box mesh.
Holes of a compound path are still left out, as before.
Docs: docs/target-app-parity.md.
- PDF 1.3 and 1.4 files, PDF/X-1a, PDF/X-3, PDF/X-4 and PDF/A-2b at
PDF 1.4 among them, write a page longer than 14,400 pt in points
again, now with a warning that apps that keep to the limit cut it to
200 in. Only a page that failed with
"PDF writer error: Limit(TooLargeFloat)" gets the new error: one
whose size or art needs a real number past 32,767, the most PDF 1.4
holds. Whole numbers are written as integers, so a page of whole
points past 32,767 is written as before.
- A page whose side is past 32,767 pt and not a whole number of points
is refused before the thumbnails are drawn and the transparency is
flattened.
- A PDF 1.5 file written as PDF 1.6 for a long page keeps PDF 1.5's
encryption (128-bit RC4), which the Save PDF dialog shows.
- A long page whose short side would be under 3 units at its UserUnit
(ISO 32000-1, Annex C.2), such as 50 m x 4 mm, gets a smaller
UserUnit that keeps the short side at 3 units, with a warning.
- The warnings give a page's size rounded up, as the error does.
A page of 14,400 pt or less is written as before. The new warning has
rows in every complete catalog. Docs: docs/mcp.md,
docs/target-app-parity.md and the document.exportPdf params.
edit.colorSettings set only the process-wide colour settings, so the RGB and
CMYK working spaces, intent and black point compensation went back to the
defaults at every start, although the profiles color.loadProfile loads are
kept (#2168, #2174). The engine now writes them to a settings file when they
change (Session::attach_color_settings), and the desktop app and
vectorcraft-cli keep that file as `Color Settings.json` next to the
preferences, attached right after the profile store so a saved working space
may be a loaded profile. Saved settings that can't be used (a profile that is
gone, a damaged or oversized file) leave the defaults with a log record, and
the next change writes over them. Nothing is read or written with
VECTORCRAFT_NO_PREFS.
A compound member copied or cut on its own now keeps the compound's
gradient fitted where it was: an unplaced gradient is pinned to the
compound's bounds, measured once per compound.
Clear that deletes every anchor or segment of every member of a compound
path now removes the compound too, as Cut does, instead of leaving an
empty compound in the layer.
The edit.copy and edit.clear descriptions, docs/mcp.md and the progress
line now say that selecting the compound copies it whole, that isolation
mode takes each member as itself, and how a compound of one and Paste in
Front with the copied member still selected behave.
A run that calls imageTrace.make used to take the trace the app handed in
for the command, and a failed run did not give it back. The trace is now
set aside while the run goes and handed back after it.
A compound-path member selected on its own, whole with Direct Selection
or with Group Selection, is now copied as an ordinary path instead of
promoting the selection to its compound. Cut removes the same objects
Copy takes, so the other members stay a compound path, a compound of
one included. The compound is still taken whole when every member is
selected whole, or when the compound itself is selected.
A copied member or piece takes the compound's paint, opacity, blending
mode, opacity mask, pixel alignment and fill rule.
Tests that pinned the earlier rule from #786 now check the new one.
A command's result describes the document, so a plug-in without doc.read
gets -6 for every call, whether or not the id names a command. A run that
calls commands commits an edit still in progress first and prepares its
input again when that changed the document or the selection.
A call was refused when any string in its arguments started with plugin., so a filter could not create text such as "plugin.example". Only the values of effect, effects, id (effect.apply's other name for effect), command and commands count now, at any depth.
Two engine tests still expected a clipping group to be refused. Each
solid 3D effect (Extrude, Inflate, Rotate and Classic Extrude) on a group
holding a clipping group now applies and draws a solid, with the members
unchanged. Revolve on a clipping group, alone or in a group, now draws its
surface. The refusal cases now use an image, alone or in a group, which
is still refused with the Image Trace message and leaves the document
unchanged.
main added text.setPathHandle, which moves a handle of type on a path's path in the document. Commands a plug-in may call are listed one by one, so it goes in the allowed list.
A filter at plug-in API level 2 with the new `commands` permission names
the commands it may run in its manifest's `commandAllowlist` and runs
them with `env.vc_call`, reading each result with `env.vc_call_result`.
Each call runs through Session::execute on the run's document and sees
what earlier calls changed; the calls and the filter's output are one
undo step, and a run that fails, is cancelled or makes a failed call
leaves the documents, their history and the session state the commands
change as they were.
Commands that touch files, the clipboard, preferences, the view,
scripts, actions, plug-ins, open documents or the undo history are never
callable, and every other command must be listed as allowed in
cmd/plugin_call/reviewed.rs, so a new command is refused until placed.
Calls are capped at 1,000 a run, 8 MiB a call and 64 MiB a run, and each
costs instructions from the run's budget. plugin.install refuses a
manifest that lists a refused command and reports unknown ids;
plugin.inspect lists both, and the approval dialog lists the commands.
Refs #2186
Done ran text.spelling.removeWord and text.spelling.addWord one word at a
time, each saving the file, so a save that failed after a delete was saved
left that word deleted even after Cancel. text.spelling.editDictionary
{remove, add} makes every change, saves once and takes all of them back when
the save fails; Done runs it once.
Exports RGB, CMYK and grey JPGs at qualities 100, 80 and 50, at 1x and 2x,
and decodes each one. It also checks that only the CMYK files leave out the
JFIF segment (#3140). Covers #2096 too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Direct Selection showed and dragged the anchors of type on a path's path
(#3980) but not their direction handles: handle_anchors read only a
path's own data, and the canvas draws only a path's handles.
- text.setPathHandle moves a handle of type on a path's path, in
document space, as path.setHandle moves a path's; the brackets keep
their fractions and the text reflows. One undo step.
- Direct Selection draws the handles of selected type on a path and
drags them with it (Alt: one side, Shift: 45 degree steps).
The custom dictionary's words in a list, with an Entry field and Add, Delete
and Change, applied on Done, as the public Check and correct spelling page
describes it. The menu item moves from the Spelling submenu to the Edit menu,
where the page puts it.
dotCooCoo