Escape did not cancel a drag with the Anchor Point, Mesh, Shape Builder
and Measure tools, or a Direct Selection drag of a mesh point, a corner
widget or the brackets of type on a path: the drag went on until the
mouse was released. Escape cancels every other Direct Selection drag
and a drag with the Free Transform, Rotate, Reflect, Scale, Shear and
Gradient tools.
Escape now cancels an Anchor Point drag, a Mesh tool drag of a mesh
point or handle, and a Direct Selection drag of a mesh point or handle,
a corner widget or the brackets of type on a path. The art goes back to
how the press found it, no undo step is added, and the rest of the drag
and the release send nothing. Escape during a Shape Builder drag ends
it, so the release merges and deletes nothing; the tool takes Escape
only during the drag. Escape during a Measure tool drag ends it and
brings back the measurement shown before the press. Escape after an
Anchor Point or Direct Selection press that has not moved yet drops the
press. Otherwise, outside a drag, Escape does what it did before.
Docs: docs/mcp.md, docs/target-app-parity.md.
A click with the Scissors tool cut the path whether or not Alt was
held, and the cursor stayed the Scissors cursor. The reference app's
shortcut list has "Switch Scissors tool to Add Anchor Point tool" on
Alt (Option).
While Alt is held, a click with the Scissors tool now does what a click
with the Add Anchor Point tool does: on a segment it adds an anchor
point with path.insertAnchor in one undo step, and the path is not cut.
The cursor is the Add Anchor Point tool's while Alt is held. When Alt
is let go, the cursor is the Scissors again and a click cuts.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
The reference app switches an arc between open and closed with C,
flips it with F and changes its angle with Up/Down while it is dragged
out. VectorCraft's Arc tool ignored these keys during a drag.
While an arc is dragged out, C now switches it between an open and a
closed path, F switches its base between the X and Y axes in the same
box, and Up/Down raise and lower its slope by 10 within -100 to 100.
Each press switches once. The arc drawn on release uses the new values,
and they stay as the Arc tool's options. With nothing dragged, C and F
are shortcuts as before.
Docs: docs/mcp.md, docs/target-app-parity.md.
A release that arrives at a new position with no drag before it now counts
as movement, so Alt pressed at that moment no longer switches the stroke
to the Smooth tool.
Alt switched a Blob Brush stroke to the Smooth tool while the stroke held fewer than two
points, so a drag that had moved less than the sampling tolerance still switched when Alt
went down. The tool now records whether the pointer has moved from the press point at all.
A release with Alt held, after a press without Alt and no movement, also smooths instead of
painting a dot, matching the Smooth cursor shown before it.
The reference app switches the Blob Brush to the Smooth tool while Alt
(Option) is held. In VectorCraft an Alt drag with the Blob Brush painted
a blob like any other drag.
With Alt held at the press, or pressed before the drag has moved, the
Blob Brush shows the Smooth tool's cursor and a thin line without the
length label, and the release smooths the selected paths under the
drag with path.smoothRegion, as the Pencil does when Alt key toggles to
Smooth Tool is on. Shift does not constrain a smoothing drag, a stroke
that has moved keeps painting when Alt goes down, and with nothing
selected the release changes no path.
Choosing another tool during a Pencil smoothing drag no longer leaves
the Pencil showing the Smooth tool's cursor when it is chosen again.
deactivate now clears the smoothing state, for the Blob Brush too.
Docs: docs/target-app-parity.md.
With "Alt key toggles to Smooth Tool" on, an Alt drag with the Pencil
smoothed within the Pencil's "Edit selected paths" Within distance. At
0, which turns editing off, it smoothed nothing. It now smooths within
the Smooth tool's 12 px radius at every Within value.
Deleting a point of a finished path with the Curvature tool sent
path.removeAnchor, which refits the two segments that met at the point so
one curve follows them. The path kept the bend of the deleted point
instead of curving through the points that remain.
The tool now sends path.removeAnchor with curvature: true, which uses the
new curvature_remove. Each smooth neighbor takes new handles from its new
neighbors, and an end beside one of them takes its end handle again. A
corner neighbor keeps its handle directions, and its handle on the new
segment scales with the segment's chord. With two points left, the points
that curve lose their handles. Object > Path > Remove Anchor Points and
the Delete Anchor Point tool still refit the curve.
Every pointer move of a frame went to whatever tool was active, so with
a fast mouse (or a pen) a tool whose drag preview is costly (the
Selection tool moving a large selection, Free Distort, the Width tool)
redid it for each, up to 64 times a frame.
Tool::wants_samples (default false) says a tool builds a stroke from
the drag's samples: the Pencil, Paintbrush, Blob Brush, Eraser, Knife,
Smooth and Path Eraser answer true (the Paintbrush through its wrapper),
the Join tool doesn't. The canvas still reads the frame's moves every
frame, so the macOS feed's pressures stay paired, but replays them only
to such a tool; every other tool gets one drag a frame at the latest
position. A frame whose moves end where the last frame's did still
reaches the tool.
Tests: only_the_freehand_tools_get_every_move_of_a_frame (Pencil,
Paintbrush and Blob Brush get the 19 moves before the last, Selection,
Direct Selection and Width none),
a_mouse_stroke_keeps_a_frame_that_ends_where_it_started,
the_freehand_tools_want_every_sample, and
a_mouse_stroke_keeps_every_move_of_a_frame now checks every position in
order, not only the count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Pencil stroke always previewed as the path it draws, with its full
appearance: with a fill set, the fill flipped between the shape and its
inside-out as the stroke crossed itself or curved back, and hid the line
being drawn.
Pencil Tool Options get a Live preview checkbox, above Live curve
fitting, on by default and kept with the tool's other options
(`livePreview`, settings.rs). With it off, the stroke previews nothing
while it is drawn: a thin line follows the pen (the drag overlay the
Knife and Blob Brush already show), and the release, or a switch of
tool mid-stroke, draws the path with its fill and stroke, as one undo
step, as before. Escape still cancels the stroke. With it on nothing
changes. The Paintbrush has no such option and keeps previewing.
Public reference: Draw and edit paths using the Pencil tool,
https://helpx.adobe.com/illustrator/using/tool-techniques/pencil-tool.html
(lists Live preview and Live curve fitting among the Pencil's options).
The checkbox label is translated in all 24 catalogs.
Tests: pencil_with_live_preview_off_shows_a_thin_line_until_the_release
(tools), pencil_with_live_preview_off_draws_the_filled_path_on_release
(engine), and the freehand dialog test shows the checkbox for the Pencil
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A selected compound path (a shape with a hole, such as one made with
Object › Compound Path › Make) could not be redrawn with the Pencil or
the Paintbrush: at the press, find_redraw looked only for selected
objects that are paths themselves, and a compound path's paths are its
children. The stroke then drew a new path, which Keep selected selected
in place of the compound path, so every later stroke near the shape drew
a new path too: redrawing seemed to stop working.
- find_redraw takes a selected compound path's member paths as well,
the nearest one within Edit selected paths within of the press.
- path.freehand's redraw keeps the compound path selected (or, with Keep
selected off, takes it out of the selection) when the redrawn path is
one of its members, so the next stroke redraws it too.
Test: pencil_redraws_a_selected_compound_path redraws the outer path and
then the hole of a selected compound path; it fails without this change
(the first stroke draws a new path).
cargo xtask ci: every step passes except one test in `test`,
vectorcraft-pdf tests_import_fidelity::text_becomes_point_type, which
fails the same way on unmodified main on this machine; it is unrelated
to this change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Draw freeform paths with the Pencil tool says a small star appears on
the Pencil when it is ready to draw a freeform path, and Reshape paths
with the Pencil tool says the star disappears over a selected path the
drag reshapes. The Pencil cursor had no star.
- New Cursor::PencilNew: the Pencil's crosshair with a small star where
the closing cursor has its ring. It becomes the crosshair with Use
Precise Cursors and as a system cursor.
- The Pencil shows it before a press when neither find_extend nor
find_redraw (the lookups the press uses, within Edit Selected Paths)
finds a selected path under the pointer. Over such a path and while a
stroke is drawn, the cursor has no star.
Docs: docs/target-app-parity.md.
Pencil Tool Options has a Live curve fitting checkbox, on by default.
With it off, the path shown while a Pencil stroke is drawn joins the
stroke's points with straight segments, and the release fits the curve
at the Fidelity, as it does with the option on. Choosing another tool
while a stroke is drawn also keeps the stroke fitted. The option is
saved with the tool's other options.
path.freehand takes fit (true by default): with fit false, a new path,
a continued path and a redrawn section join the points with straight
segments.
The Paintbrush drops a sample less than a pixel from the last kept
point, and a release there keeps that point. The new test moves the
pointer inside Close Paths When Ends Are Within while the kept point
stays outside it, and checks that the cursor shows no closing ring and
that the release leaves the path open.
With Shift or Alt held (Alt only while Alt key toggles to Smooth Tool
is off), a Pencil press on an end of a selected open path draws a
straight line that continues the path, but before the press the cursor
was the plain straight-line cursor. Draw straight lines with the Pencil
tool says a path-continuation icon appears on the Pencil over that end:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
Over such an end the cursor is now PencilContinue, the straight-line
cursor's line leaving a small filled square.
The check is the one the press makes (Edit Selected Paths, the same
end lookup). Away from the ends, with Edit Selected Paths at 0 pixels,
with nothing selected and while the line is drawn, the cursor is as
before.
Docs: docs/target-app-parity.md and docs/ui-parity.md, where the
duplicate Pencil lines and rows left by earlier merges are cut to one.
A Paintbrush sample dropped for being under a pixel from the last point
left the ring computed from the pointer, while the release keeps the last
point; the ring now follows that point (CodeRabbit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Pencil or Paintbrush stroke released within Close Paths When Ends Are
Within of its start closes, but the cursor gave no sign of it. While the
pointer is where a release would close the stroke, the cursor is now
PencilClose (PaintbrushClose for the Paintbrush), the crosshair with a
ring, as Draw straight lines with the Pencil tool describes:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
The check is the one the release makes, on the end the stroke would
take (snapped for the Pencil). A straight line (Shift or Alt held at the
press), a stroke that continues a selected path, a stroke that redraws
one and a smoothing drag show no ring.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
With Shift held before a press, the Pencil now shows a new cursor,
PencilStraight: its crosshair with a short straight line where the
closing cursor has its ring. The cursor follows the rule the press uses
to start a straight line, so it shows exactly when the press draws one.
With Alt key toggles to Smooth Tool on and Alt held too, the Smooth
cursor shows as before. Once the press is down, and with the
Paintbrush, Shift leaves the tool's own cursor. Use Precise Cursors
turns the new cursor into the plain crosshair.
Draw straight lines with the Pencil tool describes a straight-line icon
on the Pencil while Shift or Alt is held:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html
With Alt key toggles to Smooth Tool off, holding Alt when a Pencil drag
starts now draws one straight segment from the press point to the
pointer, at the angle the pointer takes, as Shift does at 45° steps.
Pressed on an end of a selected open path, the line continues the path
from that end. Both ends snap to Smart Guides as a stroke's ends do, and
the line stays open when Alt is still held at the release. Shift and Alt
together keep the 45° steps.
Before, a drag started and released with Alt held drew a closed freehand
path. Alt pressed after the drag has started still closes the path at
the release, and with Alt key toggles to Smooth Tool on, Alt still switches
to the Smooth tool. Before a Pencil press, Alt no longer shows the closing
cursor.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
CodeRabbit findings #2, #16, #31, #103, #114, #124, #162, #179, #182, #183, #185:
- Shortcut import review: example names for each code in one pass over the rows.
- Gradients: a midpoint stop is mixed from its two stops; freeform recolor samples its
increasing positions with one advancing search (`Gradient::sample_increasing_with`).
- Recovery: image entry names are looked up by address, and dead ones swept when the map
doubles, not on every image.
- Script checker: include cycles from strongly connected components (iterative Tarjan), not
a reachability row per file.
- Batch step references copy at most 256 MB of values for one step.
- DOCX: style ids over 256 bytes are ignored where defined and where used.
- DXF: layouts keep at most 4 MB of names; a hatch's loops count against the node limit.
- Freehand and Liquify: past 1000 samples a drag previews every n/1000 samples, strokes keep
at most 100,000 samples, and the stroke kept is previewed in full before it is committed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Step 3 of the Rectangular Grid tool and Arc tool help pages
(https://helpx.adobe.com/illustrator/using/tool-techniques/rectangular-grid-tool.html,
https://helpx.adobe.com/illustrator/using/tool-techniques/arc-tool.html)
and the Tools page (https://helpx.adobe.com/illustrator/using/tools.html)
say a double-click on the tool opens its Tool Options. For these four tools
the double-click (tool.options, and Enter once #2891 lands) said the tool
had no options (#2691).
The Tool Options are the tool's click dialog in dialogs/shapes.rs, opened
without a place to draw (shapes::open_options; a `__toolOptions` field
marks it), as the review of #2979 asked: no copied form code. Its OK runs
tool.setOption and draws nothing; Cancel changes nothing. The grids' dialogs
are titled Rectangular Grid / Polar Grid Tool Options there. The options
are what the next drag draws with and what a click's dialog opens at:
- Line Segment: Length and Angle (now kept by the tool and used by the
click dialog) and Fill Line (new: shape.line {fill: true} gives the line
the current fill; the click dialog has it too);
- Arc: lengths, Reference Point, Type, Base Along, Slope, Fill Arc;
- the grids: dividers, skews and switches, plus the Default Size and
Reference Point, now kept by the tool (width, height, reference) for the
click dialog; a drag leaves them out of its command.
The grids' Reference Point is drawn only as the 9-point locator (it also
showed as a plain number field).
New strings (Rectangular Grid Tool Options, Polar Grid Tool Options, Fill
Line) have rows in all 24 catalogs.
Verification:
toolbar::tests::double_clicking_the_line_arc_and_grid_tools_opens_their_tool_options
double-clicks each tool's toolbar button: the dialog and its title, Cancel
leaves the next drag as it was, OK draws nothing, the next drag uses the
option and a click's dialog opens at it (a grid at its Default Size);
line_segment_options_and_fill_line, grid_default_size_is_an_option_the_drag_leaves_out,
fill_line_gives_a_new_line_the_current_fill. Grid dialog tests now expect
the stored Default Size. Live: double-clicking the Rectangular Grid tool in
the release build opens Rectangular Grid Tool Options; OK with 2 and 3
dividers, then a drag, draws a 3 × 4 grid.
Holding Alt while drawing with the Paintbrush, or with the Pencil while
Alt key toggles to Smooth Tool is off, closes the path at the release,
but the cursor did not change. The reference app's Paintbrush shows a
small loop while Alt is held, and its Pencil shows a small circle.
Cursor::PaintbrushClose and Cursor::PencilClose show while Alt is held
with the Paintbrush, and with the Pencil while that option is off,
before the press and while drawing. Both tools still borrow the
crosshair, so the closing cursors are drawn as that crosshair with the
PenClose ring. Use Precise Cursors turns them into the plain crosshair,
as it does PenClose.
With Alt key toggles to Smooth Tool on, the Pencil shows the Smooth
cursor while Alt would smooth: with Alt held before a stroke begins to
draw, and through a smoothing drag even after Alt is let go. Before, it
showed the Smooth cursor whenever Alt was held, also during a stroke
that kept drawing, and not during a smoothing drag once Alt was let go.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
A Blob Brush stroke followed the pointer whatever modifier keys were
held. The reference app's shortcut list has Shift constrain the Blob
Brush path horizontally or vertically.
With Shift held during a drag, each point of a Blob Brush stroke now
goes on the horizontal or vertical line through the press point that
is nearer in angle to the pointer, at 90-degree steps from the
Constrain Angle preference, and keeps its distance from the press
point. When the pointer crosses to the other line, the points dragged
since Shift went down move to it, each on its own side of the press
point. Each point reads the Shift state of its own event, so the
points dragged while Shift is up follow the pointer. The stroke still
runs path.blob once on release.
Docs: docs/target-app-parity.md.
docs/control-protocol.md and the tool.options params text say that 0
turns the Pencil and Paintbrush options Edit selected paths within and
Close paths when ends are within off. A stroke that
started exactly on an end of a selected open path still continued that
path at 0, and a stroke that ended exactly where it started was still
closed at 0, because both checks compared the distance with <= 0.
At 0, a stroke that starts on an end of a selected open path now draws
a new path, as one that starts on the path away from its ends already
did, and a stroke that ends where it started stays open.
Docs: docs/target-app-parity.md.
Measurement labels while drawing now match the Measure tool (D, angle, dX/dY) when the preference is on.
Co-authored-by: Cursor <cursoragent@cursor.com>
With the Anchor Point tool, a drag from an anchor pulls out smooth handles.
Shift held at the press now moves the anchor instead, its handles keeping
their offsets; Shift kept down during the drag keeps the move at 45° steps
(the constrain angle), released it frees it. A Shift-click that doesn't
move leaves the anchor as it was. A selected blend's spine points follow
the same rule (object.blend.spine.moveAnchor).
The move goes through a new engine command, path.moveAnchor
{id, subpath?, anchor, x, y}, since path.moveAnchors only acts on the
direct-selected anchors and the Anchor Point tool keeps no anchor selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dotCooCoo