An EPS or PostScript file that stops on a PostScript error named the
error, such as typecheck or rangecheck, with the operator and the
procedure, but did not say what the name means in any language.
The warning or error now gives the name as PostScript spells it,
followed by VectorCraft's own wording of what it means in the reader:
"a PostScript error (typecheck in `add`; a value has the wrong type for
the operator)". vectorcraft_eps::POSTSCRIPT_ERRORS lists the 14 names
the reader raises other than undefined, with their meanings, and a
test checks that each of those names has one. Each meaning and the
new message shapes have a row in every catalog. i18n::message now
translates placeholder values five levels deep instead of three, which
the status bar's line for an EPS file that can't be opened needs.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's graphs help describes adding totals to a column
design: type in the design holds a percent sign followed by two digits.
VectorCraft drew that type as typed, stretched with the design.
Type in a column design that holds a % followed by two digits now shows
the value of each column or stacked segment in place of the % and the
two digits. The first digit is the least number of places before the
decimal point, with zeros added in front (0 for as many as the value
needs), and the second is the number of places after it. Values are
rounded half away from zero. The type keeps its own size and moves to
where the design's copy puts the point it is set from. A repeating
design shows it once per column, where a whole copy ending at the value
end puts it, and Chop Design does not cut it. A sliding design moves it
with the part of the design on its side of the guide. Type inside a
group that clips or has its own opacity, blend mode, appearance or
opacity mask, or inside a blend, compound shape, envelope, repeat or
intertwine, stays in the design and shows the value in each copy. Type
inside a symbol stays as typed. The legend swatch leaves the totals
out.
Docs: docs/mcp.md, docs/target-app-parity.md.
object.objectsOnPath.attach took a path inside a compound path, blend,
envelope, repeat or Intertwine group, or a clipping path, as the path
and put it into the new Objects on Path group, so it was no longer a
part of its container. As objects, a blend's key path, a repeat's
source art, an envelope's content and a clipping path were put into
the new group the same way.
The Objects on Path tool highlighted a blend's key path or a clipping
path and attached the selection to it.
objects_on_path::held now finds the container that holds an object.
The command refuses such a path or object with a reason, and the tool
does not highlight it or attach to it. A member of a compound path
given as an object still attaches as its whole compound path. The four
new messages have rows in every complete-message catalog.
Docs: docs/mcp.md (Objects on Path).
Object › Live Paint › Merge built the merged group anew and copied
only the bottom Live Paint group's name, opacity and blend mode, so
its lock, visibility, appearance, opacity mask, graphic style link and
other properties were lost. Make with a Live Paint group selected, and
a Live Paint Bucket click on a selected path beside a selected Live
Paint group, made a new group with a new id instead, and every face
took the fill of its paths again.
Merge now starts from the bottom Live Paint group, as Gap Options
does, and replaces only its faces, edges and paths and its Gap
Options. Make, and livePaint.fill with ids when the point is outside
that group's faces, add the other objects to the bottom Live Paint
group among them as Merge does.
Docs: docs/mcp.md, docs/target-app-parity.md.
Distribute Objects and Distribute Spacing space the selected ruler
guides across the axis (vertical ones for the horizontal options,
horizontal ones for the vertical options) together with the selected
objects, as items with no size. Guides along the axis stay where they
are. Two or more guides selected without objects are enough, and the
Align panel's Distribute buttons are enabled for them. With Align to
Artboard, the outermost items go to the artboard's edges.
A key guide (select.key {guide}) is one of those items. With a spacing,
it stays put and the other items are spaced from it, as from a key
object with no size; a key guide along the axis leaves everything where
it is. The Align panel sends the Distribute Spacing value with both
rows of Distribute buttons while a guide is the key, and enables the
value for it.
brush.new and brush.options refused a Hue Shift colorization given
without a key color ("invalid brush: missing field `key`"), and only
Brush Options picked a default. The reference app's Brushes page says
that by default the key color is the most prominent color in the art.
A Hue Shift colorization without a key now takes the solid color that
the art's fills and strokes use most, the first one found on a tie, or
black when the art has no solid color, as Brush Options already does.
Brush definitions read from a document get the same default.
brush.options replaced each field its params named, so an edit that
gave only the colorization method or only an art brush's start guide
was refused because the key or the end guide was missing. It now
merges colorization and an art brush's scale field by field.
Docs: docs/mcp.md, docs/target-app-parity.md.
Document Info had no Brushes category, and document.info refused
category "brushes". The reference app's Document Info panel menu lists
Brushes after Graphic Styles.
Document Info now has a Brushes category after Graphic Styles. For the
whole document it lists the Brushes panel's brushes. With Selection
Only it lists the brushes that the selected objects' strokes use, each
once. document.info gives the names as brushNames, the panel's flyout
offers the category, and the text report that Document Info › Save…
and File › Package write has a BRUSHES section.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's View menu has Show Live Paint Gaps, which
highlights the gaps in the selected Live Paint group based on the gap
options set for that group. VectorCraft had no such item.
View > Show Live Paint Gaps (view.livePaintGaps) turns the highlight
on or off, and the item reads Hide Live Paint Gaps while it is on.
While it is on and edges show, the canvas draws the gaps of each
selected Live Paint group up to its Paint Stops At size, the gaps that
livePaint.info lists. It draws them as the Gap Options preview does,
as lines in the group's Gap Preview Color. The setting works as View >
Hide Text Threads does: one setting covers every document, it is saved
with the interface state, and Hide Edges hides the gaps. It is off by
default.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app's Brushes panel menu has Select All Unused, which
selects the brushes that are not used in the document. VectorCraft's
Brushes panel menu had no such item, and no command listed the unused
brushes.
brush.unused (Select All Unused) is a query that lists, in library
order, the brushes no stroke paints with. Strokes in the art and its
opacity masks, in symbols, graph designs, pattern tiles and graphic
styles count, and so do strokes in the art of a brush that is used.
The art of a brush that is not used does not count, so a brush whose
own art is the only art that paints with it is listed, and so is a
brush used only in the art of an unused brush. The Brushes panel
menu's Select All Unused selects these brushes, and Delete Brush and
Duplicate Brush then act on them.
Docs: docs/mcp.md, docs/target-app-parity.md.
Select > Object > Bristle Brush Strokes selected the objects whose
brush name contains "bristle". It missed objects with a bristle brush
of any other name, and it selected objects whose brush is of another
type with "Bristle" in its name.
select.object.bristleBrushStrokes now looks up the brush of each
object's topmost stroke in the document's brush library and selects the
object when the brush is a bristle brush, whatever its name.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app makes a document without opening the New Document
dialog with Ctrl+Alt+N on Windows and Option+Command+N on macOS.
VectorCraft had no default key for it.
file.newWithoutDialog (New Without Dialog, default Cmd+Alt+N) makes a
document with the settings New Document opens on: the first Recent
entry, or the Print category's Letter while Recent is empty, named
after the next untitled document. It fills the fields with the
dialog's own open, runs file.new with the params Create sends, and
does not show the dialog. A dialog that is already open stays open.
Keyboard Shortcuts lists it under File.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
The reference app adds a new fill with Ctrl+/ on Windows and Command+/
on macOS, and it adds a new stroke with Ctrl+Alt+/ on Windows and
Option+Command+/ on macOS. VectorCraft had Add New Fill and Add New
Stroke on the Appearance panel, with no default key for either.
appearance.addFill now has the default Cmd+/ and appearance.addStroke
has Cmd+Alt+/, which are Ctrl+/ and Ctrl+Alt+/ on Windows and Linux.
Like the panel's buttons and menu items, each key runs its command with
no params and adds the item to every selected object. Keyboard Shortcuts
lists both under Window › Appearance with their keys, and press_key
runs them for agents.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
craft-docpath follows a stored path only on this computer or on the
share the document is on, but its check is lexical and cannot see
mapped drives. fileio::document_path therefore followed a link stored
as Y:\img\logo.png, where Y: is mapped to \\server\other, from any
document: opening the document, links.check, Link Info and the
linked-file watch read or stamped the file on that server.
On Windows, document_path now reads the final path of the root folder
of a link's drive (std::fs::canonicalize). Windows opens that root
folder on the drive's server to answer, so the check still contacts
the server once per lookup; no file on it is read, stamped or watched.
When the final path names a share, the link is checked against the
document's path on its share, and a link on another share is refused
as on another computer, as a link stored with that share's own path
is. Links on this computer's drives and on the document's share are
followed as before, and a link on the document's own drive is not
looked up. A document opened as \\?\Z:\... is looked up on its share
as Z:\... is. Other systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
A plug-in could filter objects or reshape them as a live effect, but
nothing it made could leave the app: pen plotters, cutting machines and
laser cutters read formats VectorCraft doesn't write. An exporter is a
third kind of plug-in ("kind": "exporter", with the file "extensions"
it writes), in the same sandbox and with the same ABI v1 exports.
- It adds a write-only format, plugin.<id>. document.formats lists it
with its plug-in id, and document.export writes it by that id, or by
a path ending in one of its extensions that no built-in format has;
"params" carries its parameters, checked against its manifest as a
filter's are.
- File › Export › Export As lists it after the built-in formats, with
Use Artboards greyed out, since the plug-in writes the whole
document. One with parameters asks for them in a dialog generated
from its schema (pluginExport) once the file is picked.
- The plug-in is given the native file's JSON (format::json_part:
images of 8 KiB or more without their data) and _context {mode:
"export", extension, name}. It returns {"dataBase64", "warnings"?}
or {"error"}. The host writes the file, and nothing when the plug-in
declines or returns bad data.
- An export gets 10 G instructions plus 4,000 per byte and 300 s.
Background Export's Cancel stops it between two slices of that
budget (Error::Cancelled), and a cancelled live-effect run is not
cached as a failure.
- plugin.run and Object › Plug-ins say where an exporter is instead of
calling it a live effect.
engine/tests/plugin_export.rs reads back what an exporter is handed
with wat::echo_exporter, an exporter whose file is its input or its
parameters (its base64 encoder is written in WAT). The document it is
given is document.save's JSON, without the large image's data, and its
parameters arrive defaulted, clamped and with the file's name and
extension. It also covers listing and removal, built-in extensions
winning, selectedOnly, declines, bad base64, missing data, warnings,
and Cancel stopping a plug-in that never returns. It is a test binary
of its own: installed plug-ins are process-wide, and the format-list
unit tests check exact lists. dialogs/tests_plugin_export.rs drives
Export As headlessly; plugins/tests/abi.rs covers the budget, the
parameters and the echo exporter; format/tests/native_v4.rs covers
json_part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HhvnnnD5fTFupK8WWq35un
With Include SVG Code on, Copy offered the SVG markup as plain text with every placed image
embedded as base64: a 13 MB photo made 17 MB of text. A paste reads the text first (eframe on
every paste key; on Linux and macOS it is the one format written, and holds_ours reads it again),
so each paste moved it through the system clipboard on the UI thread, and on GNOME the app
stopped responding.
The SVG markup now goes out as text only while the images it embeds total at most 1 MiB; above
that it is offered as image/svg+xml and PNG. Type keeps its text, and vector art keeps its SVG
text at any size (only embedded image bytes count).
Windows 11, Ryzen 5 2600X, 13 MB PNG, real Ctrl+C: the longest UI stall fell from 823-1021 ms
to 133 ms. Not run on Linux.
A lone object selected with ruler guides can be the key (the Selection
tool's click on it), and Align to the key moves the other selected
guides to its edge or centre: vertical guides to left, centre or right,
horizontal ones to top, centre or bottom. Parallel guides line up on a
key guide. Aligning to the selection or the artboard leaves guides alone.
A click with the Selection tool on a guide selected with objects makes
it the key (select.key {guide}), drawn thicker; a click on it again
cancels it. Align to Key Object is on with one object and a selected
guide and makes the guide the key. object.align lines the objects (or
selected anchors) up on the guide's line and leaves the guide where it
is: a vertical guide sets x only, a horizontal one y. The selection
keeps key_guide beside key, never both; it goes with the guide or the
objects, and follows the guide when earlier guides are deleted.
Distribute Spacing doesn't space from a key guide.
The list fills the panel down to its bottom bar and scrolls, also while a drag nears its top or
bottom edge (in the dock and in a flyout, as the Layers panel does).
Dragging in the list:
- an item (colour, text style or graphic) dropped on another of its kind lands just before or
after it, by the pointer's half, an accent line showing where, and joins that item's group;
- dropped elsewhere on a group (its header too, even collapsed) it goes into that group, and on
the ungrouped items out of its group, the section outlined; with every item grouped, a
"Drop here to take it out of its group" strip shows while one is dragged;
- a group dragged by its header goes before or after another group.
Colours and graphics still drag onto art and the canvas as before.
Engine: library.moveItem takes `before` / `after` (an item of the same kind) to place the item
in its kind's order, which the panel shows; the new library.moveGroup {group, to} moves a group.
Text styles drag as PanelDrag::LibraryItem, groups as PanelDrag::LibraryGroup, and a library
colour's Paint drag names its library item, so the panel tells it from a swatch dragged in.
Tests: reordering and moving in the engine, the commands in the library fuzz test, and panel
tests that drop styles and group headers and check the list scrolls and scrolls while dragging.
Strings translated in the 23 catalogs; docs/mcp.md and the parity row updated.
With the Anchor Point tool, a drag from an anchor pulls out smooth handles.
Shift held at the press now moves the anchor instead, its handles keeping
their offsets; Shift kept down during the drag keeps the move at 45° steps
(the constrain angle), released it frees it. A Shift-click that doesn't
move leaves the anchor as it was. A selected blend's spine points follow
the same rule (object.blend.spine.moveAnchor).
The move goes through a new engine command, path.moveAnchor
{id, subpath?, anchor, x, y}, since path.moveAnchors only acts on the
direct-selected anchors and the Anchor Point tool keeps no anchor selection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two review points on #2880.
The reproducibility claim needed qualifying. PDF encryption draws its AES
initialisation vectors and the file `/ID` from a random seed, which
`SOURCE_DATE_EPOCH` deliberately does not reach, so a PDF exported with a
password never repeats however the variable is set. The docs and the ROADMAP
line say so now.
The byte-identity test passes an explicit `created`, so it never exercised the
clock-or-variable fallback. `pinned_or` takes the environment and the clock as
arguments, and the new test shows the variable is preferred, that a blank,
negative or non-numeric value leaves it to the clock, and that a host with
neither has no date to record. The environment is injected rather than set: a
test that changes this process's environment is `unsafe` under edition 2024 and
would reach every other test running beside it, which is why `cursor_theme`
takes a lookup closure too.
VectorCraft had no Objects on Path. A click with the Objects on Path
tool attaches the selected objects to the path clicked. The tool is in
Edit Toolbar's Modify section and the Blend tool's flyout, and Object ›
Objects on Path › Attach and the context menu with two or more objects
selected choose it. The objects and the path go into an Objects on
Path group with the path at its bottom.
- object.objectsOnPath.attach orders the objects column by column from
left to right and top to bottom in each column. The first one sits
on the path's first anchor, the last one sits on the end of an open
path, and the rest are spread evenly by length; a closed path takes
them all the way round. Each object's attachment point (Pivot, one
of nine, default the center of its bounds without strokes) sits on
the path, and the object is turned to the path there. An object that
was rotated by an angle other than a multiple of 90° is first turned
to the nearest multiple of 90°. Rotate tilts every object by that
many degrees counter-clockwise. Symbol instances are measured by
their art. Guides, compound paths, type, paths without length and
graphs are refused with a reason.
- After every edit the objects go back on the path: editing the path
moves them, an object moved on its own goes back, and objects moved
into or out of the group in the Layers panel join the end of the
path or leave it. Scaling, shearing or reflecting the whole group
keeps each object's scale, shear or reflection, and the objects are
spread evenly along the transformed path again. Undo takes the path
and the objects back in one step, and a copied group stays live on
its own path.
- object.objectsOnPath.options changes Pivot and Rotate, and
object.objectsOnPath.expand leaves a plain group. Both act on the
groups that `ids` names, or on the groups of the selection when
`ids` is not given.
- The native file keeps the group live; SVG, PDF and the other exports
write plain art. The tool highlights the path under the pointer, has
a cursor entry, and Escape during a press cancels the click.
Part of #2545
Docs: docs/mcp.md, docs/target-app-parity.md.
Double-clicking the Live Paint Selection tool did nothing, and the tool
always selected faces and edges and highlighted them in red at 4 px.
It now opens Live Paint Selection Tool Options with Select Fills,
Select Strokes, Color and Width, the options the reference app's help
page on selecting objects lists.
- With Select Fills off, a click selects the edge nearest the pointer,
as Alt-click does. With Select Strokes off, Alt-click selects the
face under the pointer, as a click does. With both off, a click
selects no face or edge.
- Color (a layer color or a custom color) and Width (1 to 20 px) set
the highlight on the face or edge under the pointer.
- The defaults are the earlier behavior: both selections on, red
(#ff2a2a) and 4 px. The options are tool options (tool.setOption
{tool: "livePaintSelection"}): they last across tool switches and
are saved with the preferences.
Docs: docs/mcp.md, docs/target-app-parity.md.
With Locate Selected Objects on, an object selected on the canvas had the
layers and groups around it opened even when Show Layers Only, a search or
the filter left it without a row. The panel did not scroll to it, but the
rows stayed open, so they showed once the panel listed every row again.
The panel now opens the rows around the object only when the object has a
row once they are open. Otherwise it opens nothing and scrolls as with the
option off. The Layers panel entries in docs/mcp.md and
docs/target-app-parity.md describe this.
By default the Layers panel opens the layers around a row and scrolls
the row into view when its highlighted rows change, for example after
a click in the panel, a new layer or Locate Object. When no row is
highlighted and a selection makes another layer or sublayer the
active one, the panel does the same for that layer's row. Selecting
art on the canvas or by a command highlights no row, so by default
the panel does not open the layer or sublayer that holds the art or
the groups around it, and does not scroll to the art's row.
Panel Options gets Locate Selected Objects, off by default and kept
with the UI state. With it on, when the last selected object changes
on the canvas or by a command, the panel opens the layers and groups
around it and scrolls to its row, as after Locate Object, but does not
highlight the row. When the selection also changes the active layer,
the panel scrolls to the object's row instead of the layer's row.
When Show Layers Only, a search or the filter leaves the object
without a row, the panel scrolls as it does with the option off. A change made with the panel's own
rows, buttons or menu is not located, and a change made during a drag
is located when the drag ends. Locate Object is unchanged.
On a layer of 5,000 groups of 10 paths with every row open, the first
panel frame after a selection change took a median of 1.6 ms with the
option on and took a median of 1.4 ms with it off, in a release build.
Docs: docs/mcp.md (locateSelected), docs/target-app-parity.md.
Choosing a data set in the Variables panel, stepping through data sets
with the panel's arrows, and running `dataset.select`, `dataset.next`
and `dataset.prev` applied nothing and showed no message when no object
was bound to a variable that the data set has a value for. This
happens, for example, after Import Data Sets… defines new variables
without binding them.
The app now shows "nothing in data set A was applied: no object is
bound to a variable it has a value for" in the status bar, and the three
commands add it to the reply as `warning`. A data set with a value for
a bound variable gives no warning even when every object bound to it is
locked; `skipped` counts those objects. What applying a data set does
is unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
PNG, PDF, EPS, legacy `.ai`, packaged zips and saved `.vectorcraft` files
record the wall-clock time they were made in, so the same commands run twice
gave different bytes although the pixels matched (#2880):
PDF /CreationDate and /ModDate D:20261018155816 vs D:20261018155817
PNG the `Creation Time` tEXt entry
.vectorcraft one byte of the stored date
SVG carries no time, and already repeated
`metadata::output_time` is the time a file records: `SOURCE_DATE_EPOCH` when it
holds a non-negative whole number of seconds, else the clock, as the
reproducible-builds specification defines it. A date a command is given
(`file.new {created}`, a save's `modified`) still wins over the variable, and a
blank, negative or non-numeric value is ignored so that an export is never
refused over the environment.
`metadata::now_unix` keeps the real clock and now has exactly two callers, both
of which must not be pinnable from the environment: the recovery heartbeat, and
the seed PDF encryption draws on.
A .ai saved without PDF compatibility has only a placeholder page in
its PDF part. document.open reads such a file from its editing data,
but with `pages` given it failed with "the file holds only a
placeholder page", even for "1" on a file of one page.
When `pages` names every page of the file, document.open now reads
the editing data as it does without `pages`.
Docs: docs/mcp.md.
path.curvatureEdit, path.removeAnchor, path.convertAnchor,
path.reshapeSegment, path.split, path.setHandle and path.insertAnchor
read subpath as an unsigned integer and fell back to 0 for any other
value. A subpath of 1.5, -1 or "1" edited subpath 0 and the command
reported success. path.split read anchor and segment with as_u64 too
and treated any other value as absent, so a bad anchor beside a good
segment split at the segment.
These commands now refuse a subpath that is not a whole number of 0 or
more with "missing integer `subpath`", the error path.curvatureEdit,
path.removeAnchor, path.convertAnchor and path.reshapeSegment already
give for a bad anchor or segment, and path.split refuses such an anchor
or segment too. Without a subpath, or with null, they edit subpath 0 as
before. The document and the undo history stay as they were after each
error. The params text of the six commands that listed subpath as
required now marks it optional.
Docs: docs/mcp.md, docs/target-app-parity.md.
craft-docpath follows a network path only on the share the document is
on, and its caller contract asks for a document opened from a mapped
drive to be passed by its UNC path. fileio::document_path passed the
drive path as given, so a document opened as Z:\jobs\doc.vectorcraft
treated a link stored as \\server\share\img\logo.png, on the share
behind Z:, as on another computer: the image was missing, and
document.open, links.check and links.info gave refused: "the path is on
another computer".
On Windows, when a stored path is refused as on another computer and
the document is on a drive, document_path now reads the final path of
the document's folder (std::fs::canonicalize). When that names a share
(\\?\UNC\server\share\...), the path is checked again against the
document's path on that share. Links on other computers stay refused,
and paths that were followed resolve as before. Opening a document,
Link Info, links.check and the linked-file watch all use it. Other
systems are unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
Transform Each, Rasterize, Create Object Mosaic, Create Trim Marks and
Rearrange All Artboards read their optional numbers with f64_or, which
falls back to a default for a value that is not a JSON number.
object.transformEach {"scaleH": "50"} left the selected objects at
their size and reported success. Rasterize did the same with ppi,
Create Object Mosaic did the same with width, height, spacingX and
spacingY, Create Trim Marks did the same with offset, length, bleed and
weight, and Rearrange All Artboards did the same with spacing. Crop
Image cropped to the artboard when rect was a string or another value
that is not an array.
These commands now fail with "`<key>` must be a number, not <value>"
for a value that is not a number or null, as the transform commands
do, and change nothing. Transform Each checks scaleH, scaleV, moveH,
moveV and rotate. Crop Image refuses a rect that is not an array of
four numbers with "rect must be [x, y, width, height]", the message it
already gave for an array of the wrong length; a null rect crops to the
artboard, as a missing one does.
Docs: docs/mcp.md, docs/target-app-parity.md.
document.pdfInfo refused PostScript (an EPS, a .ps file, or a .ai in
PostScript form), mostly with "this is a PostScript file ..., not a
PDF", although document.open and file.place read the same file
through the EPS reader as one page.
It now answers {pages: 1, needsPassword: false, pageInfo: [{width,
height, rotation: 0, boxes: {}}]}. The page is the file's bounding box
(%%HiResBoundingBox when it has one, a US Letter page without one),
read from its comments without running its program. thumbnail: 1 is a
PNG of what that page prints, read by the EPS reader without any
editing data the file carries. A program whose header is only %! is
read as PostScript, as clipboard.importEps reads it.
Docs: docs/mcp.md, docs/target-app-parity.md.
style_weight reads W0–W9 style names (Hiragino, Morisawa…) as their weight classes before the English words, so SVG and CSS export write font-weight 600 for W6, and nearest-style matching weighs them too.
The Paragraph panel menu's Justification… was a disabled stub, and justified
lines stretched word spaces between fixed limits (80% to 150%).
Each paragraph now has Justification options: Word Spacing, Letter Spacing
and Glyph Scaling (Minimum, Desired, Maximum, in percent), Auto Leading and
Single Word Justification. Desired applies to every line; a justified line
fills its measure with word spacing first, then letter spacing, then glyph
scaling, each within its range, and past them its word spaces take the
rest. The Every-line Composer scores lines by that flexibility. Auto
Leading sets the leading of characters whose leading is Auto. A justified
line holding one word is spread between its letters (Full Justify) or
aligned left, centre or right.
The defaults are the documented ones (80/100/133, 0/0/0, 100/100/100, 120,
Full Justify), saved only when they differ. Because the default maximum
word spacing is 133%, justified paragraphs break differently than before;
the Every-line Composer's second pass is now unbounded for justified text
(it used to give up past four times the stretch and fall back to the
Single-line Composer, which the narrower default range would make common),
and lines that can't stretch at all are still refused.
text.setFormat takes wordSpacing, letterSpacing, glyphScaling ([min,
desired, max] or {min?, desired?, max?}), autoLeading and
singleWordJustification; Minimum ≤ Desired ≤ Maximum must hold or nothing
changes. Paragraph styles carry the options (New and Redefine capture
them), and Reset Panel resets them. Justification… opens a dialog
(ui.justification) with Preview; OK is disabled while a row is out of
order. Live SVG text places characters the options move, and a glyph that
Glyph Scaling scales is stretched to its width; PDF uses the glyphs'
transforms. Vertical type isn't glyph scaled; type on a path doesn't use
the options.
Docs: docs/mcp.md, docs/type-parity.md, docs/gaps.md.
Closes#2755.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The blend, envelope and gradient mesh commands read their optional
numbers with f64_or or as_f64, which fall back to a default for a value
that is not a JSON number. object.blend.make {"steps": "8"} made a
Smooth Color blend and reported success. Blend Options did the same
with steps, distance and value. Make with Warp, Reset with Warp and
Envelope Options did the same with bend, h and v (and their long
names). Make with Mesh, Reset with Mesh and Create Gradient Mesh did
the same with rows, cols and columns. Envelope Options did the same
with fidelity, Create Gradient Mesh did the same with highlight, and
Set Mesh Point Color did the same with opacity.
These commands now fail with "`<key>` must be a number, not <value>"
for a value that is not a number or null, as the transform commands
do, and change nothing. Envelope Options refuses the warp keys whether
or not a warp envelope is selected. Create Gradient Mesh refuses an
`at` that is not exactly two numbers with "`at` must be [x, y]".
Before, it took the first two entries of a longer array, and for any
other value it made a mesh with no lines through the point.
Docs: docs/mcp.md, docs/target-app-parity.md.
PathData::bounds measured each segment by its start, end and extrema,
as kurbo's bounding_box does. For a curve with a handle at about 1e308
in size, or an infinite one, kurbo's extrema computation overflows and
drops the extreme. The box then held only the anchors. The canvas check
after an edit reads that box for the selected objects, so path.create
kept a curve with handles at 1e308.
The new segment_bounds measures a segment by its control points when
one of them has an x or y that is infinite or larger in size than
f64::MAX / 16, and by its extrema otherwise, bit for bit as before.
curve_bounds joins those boxes as kurbo does, and PathData::bounds uses
it, so such a curve's box holds the whole curve and the canvas check
refuses an edit that leaves one selected.
Docs: docs/mcp.md, docs/target-app-parity.md.
The History panel menu had no Clear History, and VectorCraft had no
command that removes the undo and redo steps. In the reference app,
Clear History in the History panel menu removes the states after the
selected state, and it removes the states before it while their
changes remain in the document.
edit.clearHistory (Clear History) removes every step to undo and to
redo in the active document and returns how many it removed. The
document and the selection stay as they are, and clearing is not an
undo step. Typing or a drag still in progress becomes a step first, as
Undo makes it one, so its change stays in the document. The command is
disabled when there is no step to clear, and it waits while an input
method composes, as Undo does.
The History panel menu has Clear History after Step Forward. It runs
the command and is disabled when there is no step to clear.
Docs: docs/mcp.md, docs/target-app-parity.md.
The engine built the PDF options without a creation date, so the
writer dated every PDF and PDF-compatible .ai file with the time it
was written. A document created on 2020-01-01 (File › File Info
shows the date) exported as a PDF with today's date in /CreationDate
and xmp:CreateDate. SVG export with the metadata option already
writes the document's own date.
The options now carry the document's File Info created date and the
time of writing as the modification date. A document without a
creation date is dated with the time of writing, as before, so PDF/X
files still get their required date. The PDF writer writes one date
for both, so the export then sets /ModDate, xmp:ModifyDate and the
PDF/A history dates to the time of writing; /CreationDate and
xmp:CreateDate keep the document's date. The page information mark
and the embedded editing data's modification date keep the time of
writing.
Docs: docs/mcp.md (File Info), docs/target-app-parity.md.
Object > Expand and Object > Create Gradient Mesh mixed a freeform
gradient's points in display RGB and turned the result back into the
points' model with the profile-free formula. CMYK inks changed: points
of C50 M20 Y0 K10 gave mesh points of C45 M24 Y0 K22. RGB points were
stored as display sRGB, so with a working RGB space other than sRGB
the mesh showed other colors. Points colored along CMYK stops, a point
paint.freeform.splitLine added between CMYK points and a point
paint.freeform.addPoint added without a color came out as RGB.
Points that share a color model now mix in it: the C, M, Y and K
values mix as inks, and Gray, RGB and Lab components mix as they are.
Points in different models still mix in display RGB. Object > Expand
and Object > Create Gradient Mesh store the result in the working RGB
space, and in a CMYK document they store it as CMYK through the color
settings, as paint.setFill stores an RGB color. Freeform::recolor and
split_line mix with the new Color::lerp_keep_model, which
vectorcraft_doc::blend::lerp_color now calls.
Docs: docs/mcp.md, docs/target-app-parity.md.
pattern.options refused a new name that another pattern had, but not
one that a color swatch, a gradient swatch, a second swatch of the
pattern or a color group had. The rename then gave the pattern's swatch
that name, so two swatches, or a swatch and a color group, had one
name. The rename also gave the new name to every swatch that had the
old one, a color swatch included, and art linked to that color swatch
kept a link to a name no swatch had. Make and Save a Copy numbered a
pattern's or a swatch's name, but not a color group's.
pattern.options now refuses a name that a swatch or a color group has,
with "a swatch or color group named `<name>` exists". It takes a name
that only the pattern's own swatches have, such as a name Swatch
Options gave the pattern's swatch, when none of them still has the old
name. A rename gives the new name only to the pattern's swatches that
had the old one. Make and Save a Copy number a color group's name as
they number a swatch's. The new message has a row in the 17 catalogs
that translate every message (COMPLETE_MESSAGES) and in bg, da, id and
nl.
Docs: docs/mcp.md, docs/target-app-parity.md.
file.saveAsTemplate with format ait and aiVersion: "7" wrote the
legacy PostScript .ai of version 7 under the .ait name: for a
one-artboard test document, a 7,556-byte file starting %!PS-Adobe-3.0.
The web's Save as Template dialog showed the .ai Version menu for
.ait, whose Legacy (version 7) choice set aiVersion 7.
aiVersion 7 for a .ait is now an error, "aiVersion 7 writes legacy .ai
files; a .ait template is always PDF-compatible", and nothing is
written. The 17 catalogs that translate every message have a row for
it. The dialog shows no Version row for .ait, and aiVersion "pdf"
still writes the PDF-compatible template.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/file-format-parity.md
(two stale rows for .ai and .ait removed).
document.export, document.serialize, document.exportSelection and
Export for Screens rows answered "PDF-compatible .ait template files
can be opened but not written" for a .ait, although
file.saveAsTemplate writes them. The CLI's convert and run --export
call document.export, so vectorcraft-cli convert in.pdf out.ait
failed with that error.
The error now reads "PDF-compatible .ait template files are written
by file.saveAsTemplate", with a row in the 17 catalogs that translate
status messages and in bg, da, id and nl. convert and run --export
write a .ait with file.saveAsTemplate, which writes every artboard
with the .ai options. convert passes --replace-lossy and its .ai flags
on, and refuses --artboard and --range for a .ait.
Docs: docs/mcp.md, docs/target-app-parity.md.
In a CMYK document, paint.setFill stores an RGB color as CMYK through
the color settings, but the other commands that take a color stored it
as RGB: text.create, text.createInPath, text.setStyle and
text.setRangeStyle colors, a shapeBuilder.merge hex fill,
paint.editGradient stops, freeform gradient points, gradient mesh
points, the Symbol Stainer's color, and swatch.new {colors},
swatch.newGroup, swatch.editGroup and swatch.edit. The Mesh tool sent
the fill as a hex value, so a CMYK fill came in as RGB.
These commands now store such a color through paint::new_color, as
paint.setFill does, and take keepModel to keep RGB (shapeBuilder.merge
inside its fill object). A color the swatch
or gradient already has keeps its model, so stops sent back with a
moved offset keep their colors (the Gradient panel's ramp and the
Gradient tool send keepModel), and a stop that names a process
swatch takes the swatch's color as it is, in paint.setFill gradients
too. Where the app copies an existing color, it keeps the color's
model: the Color panel's sliders for gradient stops and freeform
points, a swatch put on a stop or a point (the stop popover, Alt-click
in the Swatches panel, a drop on the Gradient panel's ramp), the fill
the Mesh tool gives a new point or the Symbol Stainer applies, and the
colors the Color Guide, Color Themes and Recolor Artwork save as
swatches.
swatch.new {color, mode} converted RGB into CMYK before converting it
into mode, so the New Swatch dialog in RGB mode stored #00ff00 as
R101 G176 B62 in a CMYK document. With mode, the color is now
converted once.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Appearance panel's inline effect editor still showed eight choice
parameters as text fields holding the stored value: Revolve's edge,
Extrude & Bevel's bevel, every Warp style's orientation, Rasterize's
Color Model, Background and Anti-aliasing, and the channel of Levels
and Curves. Their dialogs built these lists in their own bodies, so
effect::choices did not hold them. Nothing checked a channel's value:
a typo was stored, and Levels or Curves drew it as RGB.
effect::own_choices now holds these lists, each label as its dialog
passes it to its dropdown or radio buttons. The dialogs read the lists
from it (Rasterize's Anti-aliasing from the AntiAlias list it is built
from), and the inline editor shows each one as a dropdown with the
dialog's translated labels; Rasterize's Color Model reads CMYK or RGB
by the document's mode. effect.apply and effect.setParams refuse a
Levels or Curves channel other than rgb, red, green or blue (r, g, b
and any letter case are read too) with "`channel` must be one of rgb,
red, green, blue", and the document and its undo history stay as they
were.
Docs: docs/mcp.md (effect params), docs/target-app-parity.md.
dotCooCoo