A corner's radius was capped at half its shorter side whatever its neighbours did, so one corner of a 100 pt square rounded alone stopped at 50 pt. Each corner now rounds until its cut reaches the cuts its neighbours ask for: the whole side when the neighbour is square, halfway when both ask for more. The corner widget drag, the red limit outline and CSS border-radius export follow the same limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The snap ring on an anchor (or a dot on a line) and the rubber band now follow the snapped point, so both measured points visibly land on anchors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Shift click already snapped the second point to 45-degree steps, but the dashed line from the first point followed the raw pointer, so the constraint looked absent until the click.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The overflow marker was drawn by the Type tools only, so with the Selection tool a text box smaller than its text showed no sign that text was hidden. Session::overlays now adds the marker of every selected area type and type on a path that overflows, unless a Type tool is active (it draws its own). The verdict is cached per object and font generation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A double-click on an object or group fits one artboard to the visible bounds and does not open Artboard Options. The second click does not fit another artboard. Other artboards stay. Double-clicking empty artboard space still opens Artboard Options. Double-clicking the name drawn above an artboard renames it.
A Blob Brush stroke merged with every touching closed path of its
color that had no stroke, and the blob it drew or merged into was
always left selected. The Blob Brush Tool Options had Size only.
The Blob Brush Tool Options now have Keep selected and Merge only
with selection, both off by default. A blob that a stroke draws or
merges into is no longer left selected unless Keep selected is on,
and the rest of the selection stays as it was. While Merge only with
selection is on, a stroke merges only with selected blobs, and with
nothing selected it draws a new blob. The options persist like the
tool's Size, and path.blob takes keepSelected and mergeOnlySelection,
both false by default. Keep selected stays on by default for the
Pencil and Paintbrush.
Docs: docs/target-app-parity.md, docs/control-protocol.md.
The Selection tool shows two pie widgets just outside a selected live
ellipse while the bounding box shows: one at the Pie Start Angle and
one at the Pie End Angle. Dragging one sets its angle to the angle of
the outline's point that lies in the direction of the pointer from the
ellipse's center, in one undo step, through `object.setLiveShape`'s
`pieStart` or `pieEnd`. Double-clicking one makes the ellipse whole
again (0° to 360°). Where the two widgets coincide, as on a whole
ellipse, a press takes the End widget.
Docs: docs/target-app-parity.md, docs/ui-parity.md.
A Selection tool marquee selected every object it touched, a Group
Selection marquee selected the anchors inside it, and E pressed during
the drag did nothing. Now E switches either marquee to selecting only
the objects that lie entirely inside it, measured by their geometric
bounds, and E pressed again switches it back. Each marquee starts in
the default mode.
- The Selection tool selects a group only when the whole group lies
inside. Group Selection selects the objects inside groups, each as a
whole object. Shift still toggles. Direct Selection does not take E.
- The ruler guides the marquee selects with the art are limited the same
way: an artboard guide is selected when its whole length lies inside,
and a canvas guide is not selected.
- Tools receive letter keys as ToolKey::Letter. While a tool is busy, the
desktop app sends it each press of a letter it claims, without Cmd,
Ctrl or Alt and without key repeats, and headless press_key sends a
claimed letter the same way. With nothing dragged, press_key {key: "e"}
still chooses the tool bound to E.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Shaper Group had no arrow widget for switching between Face Selection
and Construction mode.
With the Shaper or Selection tool active, a selected Shaper Group, or a
group with one of its faces selected, now shows an arrow beside the
middle of the right side of its source shapes' bounds. A click on it
isolates the source shapes (object.isolate). A second click leaves
isolation with the group selected (object.exitIsolation). The arrow
points right in Face Selection mode and left in Construction mode.
In Construction mode a Shaper click selects an original shape of the
isolated group. Before, it selected the whole group outside the
isolation, and shaper.select with source could pick an original of
another Shaper Group lying above it.
Docs: docs/shaper.md, docs/target-app-parity.md.
Make and Edit choose the Intertwine tool: hovering highlights the overlap
area under the pointer, a click swaps which object is on top there, and a
path drawn around overlaps (Shift: a rectangle) arranges every overlap
inside it; Esc or Enter goes back to the tool chosen before. The overlap
faces move to vectorcraft-tools, shared by the tool and the command.
Clicks inside a raised area pick the member drawn on top there, the
Object menu gets the Intertwine submenu, and the new labels and the
predicate message are translated in the complete catalogs. docs/gaps.md
records what landed under G13.
The nine OFL faces in `assets/fonts` are compiled into every build of
vectorcraft-text: 3.4 MB of the binary, about 1.6 MB of a gzipped wasm.
An embedder that loads every font at run time with `FontDb::add_font`
(a web app serving its own font catalogue, say) ships them twice and
can't turn them off.
- vectorcraft-text: `bundled-fonts`, a default feature, holds the
`include_bytes!` list. Off, a database starts without them (craft-fonts
and system fonts are unaffected) and text has no glyphs until a font
is added, as when the bundled fonts fail to parse.
- vectorcraft-engine: a `bundled-fonts` default feature forwards to it,
so the apps and any embedder using the engine keep the fonts unless
they build it with `default-features = false`.
- The workspace declares vectorcraft-text without default features, so
no library crate turns the fonts back on. The tests of cad, metafile
and tools, which lay type out, ask for the feature in their
dev-dependencies; the other crates' tests get it through testkit.
`cargo test --workspace` builds with the fonts, as before. A new
integration test, `without_bundled_fonts`, covers the configuration
without them (`cargo test -p vectorcraft-text --no-default-features
--test without_bundled_fonts`): the database starts without them, text
in no font lays out with no glyphs, and a font added later is used and
is the fallback for families the database lacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Curvature tool built its curve as a uniform Catmull-Rom: both handles of a
smooth point a sixth of the chord between its neighbours, the ends of an open
path without handles. Uneven spacing overshot or looped, a J or U from three
points bent sharply at the middle with straight legs, and the end segments
looked flat.
- `curvature_spline` (draw2.rs) makes each stretch of three points follow the
circle through them: a smooth point's tangent is that circle's
(`smooth_handles`), each handle `chord / (3 cos²(α/2))` long, α between
handle and chord capped at 90° (`arc_handle`). The ends of an open path
mirror their neighbour's tangent in their chord (`end_handle`). A turn
tighter than 30° (`TIGHT_TURN`) shortens its handles, so a narrow V comes to
a point. Degenerate points become corners. `path.curvature` and the rubber
band use it.
- `catmull_rom` is unchanged for the Pencil and Paintbrush fitting.
- `bend_last` (from: smooth), `curvature_move` on a smooth point, the point
`curvature_insert` adds on a straight segment, and `path.convertAnchor` to
smooth without x/y (`curvature_smooth`) use the same rule.
- `curvature_extend` gives the new end its end handle unless Alt-clicked
(`corner` param on `path.curvatureEdit`).
- Neighbours of a point dragged on an existing path keep their tangents (a
Pen-drawn shape isn't reshaped); the path being drawn re-curves throughout.
When entering text edit mode via double-click from a selection tool
(Selection or Direct Selection), pressing Escape now returns to the specific
tool used before double-clicking (rather than always falling back to
Selection).
Additionally, when editing text while in isolation mode (such as when drilling
into nested groups with the Selection tool), pressing Escape exits text editing
while keeping isolation mode active; a second Escape press is required to exit
isolation mode.
- Record the previous tool in TypeTool on double-click from canvas.
- Return to prev_tool on ToolKey::Escape, consuming the key in shortcuts when claimed.
- Add unit test in vectorcraft-tools verifying Escape returns to prev_tool.
- Add integration tests in vectorcraft-ui-egui verifying Escape returns to Direct
Selection and that isolation mode persists until a second Escape.
- Update docs/target-app-parity.md and ROADMAP.md.
With the Direct Selection tool ("white arrow", shortcut 'a'), double-clicking
a text element (either standalone or nested inside a group) now switches to
the Type tool and immediately positions the caret at the clicked character,
matching the behavior previously introduced for the Selection tool in #284.
- In DirectSelectionTool::pointer, detect double-click hits on NodeKind::Text
when !self.group and emit Action::SwitchTool("type").
- Group Selection (group: true) retains its existing group cycling behavior.
- Add unit test in vectorcraft-tools verifying tool switch on both standalone
and grouped text.
- Add headless egui integration test in vectorcraft-ui-egui verifying tool switch,
caret positioning, and inline editing without triggering shortcuts.
- Update docs/target-app-parity.md and ROADMAP.md.
The Pen's pointer showed the new-path asterisk before the first anchor
and also while a path was being drawn, where a click adds the path's
next anchor. A new Cursor::PenDrawing, the pen nib without a badge, now
shows there. The close, convert and join badges still show over the
first anchor, the last anchor and another open path's end. The asterisk
shows only where a click starts a new path.
The Continue, Add and Delete badges now also show after another path
was selected while the Pen was still drawing (for example with a
Cmd-click). A click there already continued the path or added or
deleted an anchor, but the pointer showed the asterisk.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
The Control bar had no isolation controls. In isolation mode it now
shows an Exit Isolation Mode button (`object.exitIsolation`), except
while a pattern is edited: the isolation bar's Done and Cancel end
that edit. Outside isolation mode, with one group, compound path,
path, image, mesh or placed file selected, it shows an Isolate
Selected Object button (`object.isolate`). After a Direct Selection
click on a path inside a group, the button isolates that path. An
envelope's contents get no button: for them the Control bar shows the
envelope's Edit Envelope and Edit Contents buttons.
The button offers the kinds of object that the Selection tool's
double-click isolates. The double-click's check moves unchanged into
`vectorcraft_tools::select::isolates`, and both use it.
Docs: docs/target-app-parity.md.
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
The drag threshold kept `last` at the press position until it was crossed, so
Space held when the move that crossed it came moved the anchor by the whole
distance since the press. `last` now follows the pointer while the threshold
swallows the moves, and the threshold is measured from a separate `pressed`.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A press released within a few screen pixels is a click: the anchor stays a
corner with no handles, as in Illustrator, instead of getting near-zero
handles from a trembling hand. The threshold is in screen pixels, so it
does not change with zoom. It applies to new anchors, closing a path and
pulling a handle out of the last anchor.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The typed [ and ] now reach the Blob Brush, the Eraser and the Symbolism
tools, whose bracket keys are in the public shortcut lists. A size of the
Paintbrush's own (and path.freehand's scale) is left out until its
behaviour is decided: #1661 stays open for that.
The tools took `[` and `]` (the Blob Brush's and the Eraser's size, the
Symbolism tools' diameter and, with Shift, intensity), but the app never
passed the keys on: only `ui.key` over MCP reached them.
- The keyboard handler gives a typed `[`, `]`, `{` or `}` (Shift) to the
active tool when it claims the key. It reads the typed character, so
layouts where a bracket takes Option or AltGr (Option-8 on a Turkish
Mac) work too. A field with the keyboard, the Type tool and Cmd/Ctrl
shortcuts are left as they were.
- The Paintbrush has a size of its own, 10 to start as the Blob Brush's:
`[` and `]` take a point off or add one, and the next stroke is drawn
at size / 10 of the stroke weight (path.freehand `scale`). Public
references describe the keys as changing the size the Paintbrush draws
with, before drawing, the brush definition left as it is; so the
stroke weight new art takes stays, and the selected path keeps its
stroke. Every brush type, as the report and the Tuts+ guide describe;
the step is our own.
Escape still ends editing (an empty new point type is discarded) and the type
stays selected; the Type tool now claims Escape while editing and asks for the
Selection tool, so tool shortcuts work again without the mouse.
Escape while dragging anchors, handles, segments, objects, a type area, a blend
spine or a marquee with the Direct (or Group) Selection tool cancels the drag:
what it moved goes back and the release after it does nothing.
Marquee, anchor clicks, blend spines, and Group Selection only pick the
isolated object and what is inside it. A regression test covers a path
outside an isolated group.
A point placed by the Pen, the shape tools and the other drawing tools, and a
dragged anchor, lands where two paths cross, where a path crosses a ruler guide
and where two ruler guides cross, with the Smart Guides label "intersect".
With Double Click To Isolate on, the Selection tool isolated groups only. A
double-click on a single path, compound path, image, mesh or placed file now
isolates it too, as the public documentation describes. Type still switches to
the Type tool; blends, envelopes, repeats and symbol instances keep their own
editing modes.
While a single object is isolated only it is hit, marqueed and taken by Select
All, new art goes beside it in its group or layer, and a double-click on the
empty canvas leaves with it selected. object.isolate accepts any object except
type.
