Binding art in a hidden group or layer failed with "node N is locked",
even when nothing was locked. The error now says whether the object is
locked, is in a locked group or layer, or is in a hidden group or layer.
Make Text Dynamic and Make Visibility Dynamic reported their errors under
`variable.makeDynamic`, which is not a command id. They now name
`variable.makeTextDynamic` or `variable.makeVisibilityDynamic`.
A data set can hold values for only some variables: `dataset.new` and
`dataset.set` store only the values they are given, and selecting the
data set leaves the other variables alone. Update Data Set replaced the
active data set's values with the values the art reports for every
variable. After one Update, a data set that set only a visibility
variable also held the current text of the bound type, and selecting it
again wrote that text back. Update also dropped a variable's value when
its objects were locked or inside a hidden or locked layer or group,
because such objects report no value.
`dataset.update` now writes the art's current value for each variable
the active data set holds, and keeps the data set's value when the art
reports none. A variable that the data set does not hold stays out of
it, including one defined after the data set was captured;
`dataset.update {all: true}` also adds the other variables that the art
reports a value for. The reply adds `left`, the variables it did not
write. The Variables panel's Update Data Set button and menu item run
it without `all`.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Pen's pointer showed the new-path asterisk before the first anchor
and also while a path was being drawn, where a click adds the path's
next anchor. A new Cursor::PenDrawing, the pen nib without a badge, now
shows there. The close, convert and join badges still show over the
first anchor, the last anchor and another open path's end. The asterisk
shows only where a click starts a new path.
The Continue, Add and Delete badges now also show after another path
was selected while the Pen was still drawing (for example with a
Cmd-click). A click there already continued the path or added or
deleted an anchor, but the pointer showed the asterisk.
View › Proof Setup had two color blindness items, protanopia and
deuteranopia. A third item, Color blindness – Tritanopia-type, proofs
the canvas with a tritanopia simulation, and the Separations Preview
panel's Proof Setup list offers it too. `view.proofSetup` takes
`target: "tritanopia"`.
The simulation follows Brettel, Viénot and Mollon (1997): a color
keeps its L and M cone responses, and its S response is replaced so
that it lies on one of two half-planes. Both contain the neutral
axis; one passes through the 485 nm color and the other through the
660 nm color. The neutral axis runs to the display's white, so grays
keep their value. The matrices are computed at
compile time from the published inputs cited in the code. The
protanopia and deuteranopia matrices are unchanged.
A Pencil or Paintbrush stroke always left the path it drew or continued
selected. The reference app's Pencil and Paintbrush options have Keep
selected for this, and VectorCraft's Tool Options had no such row.
The Pencil and Paintbrush Tool Options now have a Keep selected
checkbox, on by default, which keeps today's behavior. When it is off,
a new path is not selected and the selection stays as it was, and a
continued path is removed from the selection while the rest stays. The
stroke is still one undo step. The option persists like the tools'
other options, and path.freehand and brush.freehand take keepSelected.
Docs: docs/target-app-parity.md, docs/ui-parity.md, docs/control-protocol.md.
In Draw Inside, a double-click with the Selection, Direct Selection or
Group Selection tool outside the object being drawn into now sets the
drawing mode to Draw Normal (view.drawMode {mode: "normal"}), as
Shift+D does. The object's geometric bounds, grown by the selection
tolerance, count as inside, and a double-click after the object was
deleted also returns to Draw Normal. The tool then takes the
double-click as before: with the Selection tool, a double-click on the
empty canvas still exits isolation mode, and one on another object
still isolates that object. Other tools leave Draw Inside on.
Docs: docs/target-app-parity.md.
Geometry effects on a group or layer, and effects on a symbol instance,
blend or repeat, outline the type inside it. outline_nested_text
replaced each type object with a plain group of its outlines, so the
type lost its opacity, blend mode, opacity mask, knockout shape
option, own effects and perspective, and hidden type was drawn,
exported and made visible by Expand Appearance.
outline_nested_text now replaces type with the art that as_art makes
for it, which is also what reshape makes for type with geometry
effects of its own. That art has the type's own geometry effects and
perspective applied and keeps its name, transparency, opacity mask
and other effects. as_art also keeps the object's visibility and
knockout shape option, so hidden type with a geometry effect of its
own is left out of exports. Type in a clip group's clipping path still
becomes its plain outlines and now keeps its visibility.
In a dev build, opening a native file whose area type has 2^60 rows
or 2^60 columns failed with an internal error ("capacity overflow"),
and opening one with 2^32 rows and 2^32 columns failed with "attempt
to multiply with overflow". Text layout reserved room for rows times
columns frame cells. `text.areaOptions` keeps both counts within 1 to
100, but reading a document kept the counts the file gave.
Reading a document now clamps each count to 1 to 100
(`AreaOptions::MAX_ROWS_COLUMNS`): a larger count reads as 100, and 0
reads as 1, as layout already treated it. Text layout clamps both
counts the same way. Area type with 1 to 100 rows and columns lays out
as before.
The cells of a frame now share one copy of the frame's flattened
polygons and one copy of the flattened text wrap shapes. Each cell held
its own copy: in a dev build, a test process that laid out text in 100
rows and 100 columns of a circle frame of radius 1,000,000 pt peaked at
1.33 GB of memory, and now peaks at 100 MB.
The Shape Builder merges faces by uniting their contours, and the edges
two faces share cancel out. The sweep can give two faces copies of a
shared edge whose ends lie a few times its tolerance apart, with the
difference left as pieces shorter than the tolerance. The union could
then keep the space between the copies: a hairline that joined a hole
as a spur, or a seam that cut a petal tip off the ring's outer outline
as an outline of its own. On Apple Silicon, turning one petal of the
rosette test by -180 degrees instead of 180 leaves a spur.
A Shape Builder action unites the picked faces first, and then what is
left of each shape. When two copies of a shared edge differ in the
first of these unions that unites the faces' contours, each point of
the faces' contours that lies within 16 times the sweep's tolerance of
a point kept before it now moves onto that point before that union and
each later one, with the handles next to it. A piece left within that
distance of one point is dropped. The planar map joins the ends of
copies of an edge within the same distance. Copies that share their
ends leave at most a hairline contour, which the merge drops as a
sliver. When the copies in that union all match exactly, the unions
take the contours unchanged. Only the Shape Builder's merges and
deletions unite faces this way, so Pathfinder output does not change.
Duplicate Artboards, the Artboard tool's Alt-drag (artboard.move with
copy) and Paste of a copied artboard gave the new artboard the largest
artboard id plus one, saturating. In a document with an artboard id
of 4,294,967,295 (u32::MAX), which only a hand-made file has, the copy
got that same id. Artboard guides record the id of their artboard.
Deleting either of the two artboards with that id then deleted the
guides of both, and guide.list reported the copy's guides on the
other one.
push_artboard_copy now takes the id from Document::next_artboard_id,
as artboard.new and Convert to Artboards do. Since the #1718 fix, that
function returns the smallest free id when the largest is u32::MAX.
In a document whose artboard ids are all below u32::MAX, a copy gets
the same id as before.
Docs: docs/target-app-parity.md.
file.new stamps metadata.created from the clock in whole seconds. Four
Alt-drag tests in tests_xform.rs compare the document under test with
one that a second session builds, and both sessions start from
session()'s file.new. When the clock reached a new second between the
two calls, the documents differed in created, and the test failed.
With a temporary change that made each clock read on a thread at least
one second later than the one before, all four failed.
session() in tests_xform.rs and persp_session() in
tests_persp_select.rs now pass "created": null to file.new, as #1894
did for doc_with_rect() in tests_ids_without_selection.rs. Two new
tests in #2067 compare two documents built on persp_session().
Transform Each had Reflect X and Reflect Y swapped relative to Effect › Distort ›
Transform and the Transform panel. Properties flip buttons also used inverted
tooltips. Align them so Horizontal is left-right and Vertical is top-bottom.
Co-authored-by: Cursor <cursoragent@cursor.com>
The Cmd-drag part of #1881 landed in #1897. This covers the two other
paths: an edit from outside the typing session (the Transform panel) and
a new interaction such as a dialog's preview now end the typing first.
With Align to Artboard chosen, the Align panel's six Distribute Objects
buttons and its two Distribute Spacing buttons acted on the selection.
object.distribute and object.distributeSpacing took no to or artboard
param. Distribute Objects kept the outermost objects where they were
and did nothing with two objects, and Distribute Spacing kept the first
object's left or top edge and the last object's right or bottom edge
where they were.
Both commands now take to ("selection", "artboard" or "key") and
artboard, and the panel sends its Align To choice as to. When to is
"artboard", the first object's left or top edge goes to the artboard's
left or top edge, and the last object's right or bottom edge goes to
the artboard's right or bottom edge. Distribute Objects spaces the
other objects evenly by its button's line, and two objects are enough.
Distribute Spacing without a spacing value makes the gaps between the
objects equal. Both commands use the same artboard as object.align.
The app passes the active artboard to both commands, and recorded
actions leave it out, so an action plays on the artboard that is
active when it plays. With "selection" or "key", or without to, both
commands work as before. Distribute Spacing with a spacing value still
keeps the key object in place with each of the three to values. With
anchor points selected, both commands still space the points among
themselves and do not use to.
Docs: docs/mcp.md, docs/target-app-parity.md.
Place flattened every top-level layer into its objects, so an SVG's clipped top-level group lost
its clip and its clipping path came in as a loose, invisible path; sublayers lost their clips the
same way. A clipping layer is now placed as one clip group, for SVG/DXF and for the art placed from
an artboard (PDF, EPS, placed documents) alike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The file had an empty prolog, so a PostScript interpreter stopped at its first operator: it
couldn't be printed, placed or previewed by anything that runs PostScript. The prolog's
procedure set (VectorCraft_Legacy, written from the PostScript Language Reference and the
version 7 specification) now gives every operator the writer emits its meaning: paths and their
painting with separate fill and stroke colours and overprints, the fill rule, compound paths
painted as one path, clipping groups and masks, guides that don't print, layers that are hidden
or don't print marking nothing, and images drawn from the hex samples on the comment lines after
XI. Gradients fill with the colour set before them (the first stop's), and the type and encoding
operators take their operands and mark nothing.
VectorCraft opens a file with that prolog from its program, as before: its page has flat
gradients and no type.
Every file the writer's tests write is now run through import_with(bytes, false) and must draw
what the document it was written from draws: its paths, fills, strokes and images in the same
places and colours, with type left out (type the writer outlines is compared as its glyphs'
outlines), gradients as their first stop, layers that don't print left out and hidden objects
shown when the options write them visible. A new test prints the sample with every layer shown.
The engine's flattened-image test also opens the file as PostScript.
Type is written as version 7 text objects (§15): point type, area type and type on a path, with
fonts by PostScript name re-encoded to Windows-1252, and each run's paint, size, scaling,
tracking, leading, alignment and indents; type 8-bit text can't hold (or all, with outlineText)
is outlines. The format hides only layers, so hidden objects go to a hidden layer above their
own (hiddenObjects "layer", the default), are left out ("omit") or show ("visible"). The .ai
reader reads legacy type (To … TO, TE, %AI3_BeginEncoding) and ignores Ar; the import fuzzer
gets legacy type tokens.
aiVersion 7 saves through the legacy writer, one file per artboard; range picks the artboards
and document.save writes them again. Appearances are expanded first. Transparent images
(see-through pixels, opacity or a blending mode) are flattened with the art under them into
opaque images clipped to where they change it (transparentImages "flatten", the default), or
left out ("omit"); both warn.
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
Use automatic vector smooth shading without a separate control.
Enable Cap by default and keep continuous rim curves and bounded seam joins.
Integrate the shared dialog with the other three 3D effects.
A PDF is refused when a stream in it would decode to more than 256 MB
or has decode parameters the reader can't apply, but the check looked
only at the file's objects. A stream written directly inside an array
or a dictionary, such as the /Function of a shading, was not checked.
On main at b12a52f7, a calculator function holding 257 MiB of deflated
spaces opened after 3.0 to 4.3 s with a peak of 550 to 818 MB when it
was written in an array, in a dictionary or as a shading's function.
The same stream as an object of its own was refused in 81 ms.
hostile in pages.rs now runs unsafe_stream on every stream that the
walk of the file's objects meets, at any depth in arrays and
dictionaries, before it decodes the stream as a calculator function.
It refuses such a file with the same message. The walk is the one the
nesting check made before (64 deep at most).
Preserve the writer and reader changes while integrating the current main.
The combined candidate passes all eight local CI gates and the 2,048-case
reader panic verification. Hosted checks remain required before landing.
Refs #1893, #1894.
A set whose entries sit in long, deeply nested sections kept every section's names again for each entry (up to hundreds of megabytes from a 4 MiB file); the names kept over all entries now stop at 8 MiB. Name matching compares character pairs in linear time, so a 20,000-entry set of long names is matched in about 2 s instead of 17 s.
Since #1442 (3acc29f8), a caller outside the app gets an error for a
parameter key that the command's params description doesn't name, and
every_description_parses requires each top-level entry of the params
object to start with a key. The note on query in importMatches.list had
a comma at the top level ("text in the name, target or label"), so the
description didn't parse: the test failed, and the command took any key.
The note is now in parentheses, and the command takes kind and query.
A test checks that shortcutSet.read and the three importMatches
commands take every key they read and refuse a misspelled one.
A shortcut set another app saved as slash-name text (a .kys file whose
text starts with a slash name and "{", such as "/Menus {") opens in
Import Shortcut Set from File › Open, from Edit › Keyboard Shortcuts ›
Import… in the desktop app, or from a drop on the window, whether or
not a document is open. The dialog proposes a target for an entry when
an earlier import kept one for that name, or else when one tool,
command or panel matches the name clearly by its id or by one of its
labels. It decodes the file's key and modifier codes from the codes
earlier imports kept, from the example in the AiCommandPalette README
(/Key 48 for the 0 key, with /Modifiers 0 taken as no modifiers), and
from VectorCraft's default shortcuts where at least two entries vote and
four votes in five agree. The user picks the remaining targets, presses
the key for each unknown key code or marks it No equivalent, and chooses
the modifiers for each unknown modifier code. Apply assigns the ready
rows with the Keyboard Shortcuts rules: a tool takes a single key,
optionally with Shift. It goes through the rows from the last one back
and leaves a row out when a later row it applies has the same shortcut
or the same tool, command or panel. Keyboard Shortcuts then shows the
result as unsaved changes until the user clicks OK. Copy Report copies
the set's name, the rows Apply leaves out and the parts of the file that
weren't read.
- shortcutSet.read is a query command: it reads a set and does not
modify the document or the preferences. It returns each entry with
its section, codes and line, and up to 1,000 skipped tokens, each cut
to 80 characters. It reads at most 4 MiB of text and 20,000 entries,
skips blocks nested more than 16 deep and cuts names at 1,024 bytes.
With a path it reads at most 4 MiB and 4 bytes of the file, and with
--automation-read-root (#832) the path must lie inside the read root.
A file whose text starts with "<", such as an XML shortcut file saved
as UTF-8, fails with "This shortcut file is in a form VectorCraft
can't read."
- importMatches.list, importMatches.set and importMatches.reset read
and change the matches kept with the preferences; resetting the
preferences keeps them. With Remember My Choices on (the default),
Apply keeps the targets and codes the user chose, and for the rows it
assigns, it also keeps the matched targets and the codes decoded by
agreement. A later import proposes them.
- The name matcher compares a name with ids by exact match and shared
words. It compares the name with labels, in English and in the
interface language, by exact match, shared words and character
pairs. It proposes a match only when one tool, command or panel
scores at least 0.6 and at least 0.1 more than the next one.
- When Import Shortcut Set is opened from Keyboard Shortcuts, Cancel,
Escape and ui.dialog.cancel close it and return to Keyboard Shortcuts
as it was (dialogs::PARENT). A document's queued Missing Fonts dialog
(#792) opens after Keyboard Shortcuts closes.
- File › Open has a "Shortcut sets" filter, and in the desktop app
Keyboard Shortcuts' Import… shows .json and .kys files.
Docs: docs/mcp.md, docs/control-protocol.md, docs/development.md,
docs/target-app-parity.md, docs/roadmap.md.
With the Type tool editing, a press with Ctrl (Cmd on the Mac) lends the
Selection tool for the drag. Its drag joined the open typing session, so its
preview started from the document before the typing: the type moved or
scaled and lost what had just been typed. The typing is now kept as its own
undo step before the lent tool takes the press, as Undo already does, and
typing goes on after the drag.
A tile was kept while the pattern's art and what it shows were unchanged,
but a brush the art is stroked with lives in the document's other data, and
every tile is drawn through the color settings. A tile whose art reads more
than itself now also remembers the document's other data, and every tile
remembers the color settings it was drawn through (both weakly).
With Separations Preview on, the renderer copied every node of the
document in every frame and separated each of its colors again. With
Overprint Preview on, it copied each object with an overprinting fill
or stroke in every frame, with the groups and layers that hold it. The
copies were new Arcs, so the geometry, stroke outline and raster
caches missed for each of them in every frame. In a release build,
drawing a 2880x1800 frame of a 50,000-path document again with the
same view and Separations Preview took 795 to 908 ms.
The renderer now keeps the art it prepared and what it was made from,
and in the next frame it uses that art again for each layer, symbol
art and member that has not changed. Only the objects that changed are
prepared again, with the layers and groups that hold them. All of the
art is prepared again when Discard White Overprint changes and, with
Separations Preview, when the plates shown, the proof setup, the
swatches, the Spot Colors option or the color settings change or a
profile is registered (cms::profiles_generation). The renderer now
draws that frame again in 98 to 107 ms, with the same pixels.
Docs: docs/target-app-parity.md.
hayro (0.7.2 and 0.8.0 alike) inflates Flate and LZW data with no ceiling, so a few megabytes
of zeros ask for gigabytes, and applies a predictor before checking its parameters: Columns 0
divides by zero (a panic, an abort on the web), a huge Columns allocates a row that large (an
abort everywhere). Both happen inside the reader, before any of our limits.
A file is refused ("a stream in it would decode to more than 256 MB, or its decode parameters
can't be applied") when a stream's decode parameters ask for a predictor the reader can't apply,
or when it decodes past 256 MB through Flate, LZW, run-length and the ASCII encodings before
them, decoded here with a ceiling (only streams large enough to get there are decoded). Every
object's stream is looked at once the file is open (decrypted, references followed), with the
inline images of anything that can be content; object and cross-reference streams, which the
reader decodes while it opens the file, are looked at first in the file's text.
A scatter brush whose art is an instance of a symbol stroked with that brush, or any brush whose
art is painted with a pattern whose tile is stroked with it, drew itself without end: a stack
overflow in a hand-written native file. Brush pieces already strip the brushes of their own
strokes; now what they draw by name that would draw a brushed stroke (a symbol instance, or a
pattern paint, also through the symbols and patterns those use) is left out too, in one place
(`stroke_pieces`, which every renderer and exporter calls with the document).
Probed the rest of item 2 of the depth follow-up with hand-written hostile inputs, kept as tests:
graph designs of deep art and of a symbol holding itself, Affinity groups nested to and past
both of its reader's caps, DXF blocks inserting themselves, EMF/WMF saving states without end,
and plug-in manifests and output nested 30,000 to 100,000 deep. None of them overflowed.
hayro-syntax 0.8.0 reads arrays and dictionaries 64 deep and no deeper wherever they are (the
file's text, object streams, the content of pages, forms, patterns, glyphs and masks), walks the
page tree without recursion and follows a chain of object streams once: what 0.7.2 overflowed
the stack on. hayro-interpret 0.8.0 comes with it (a new device interface: the importer's device
takes it as before). Our raw pre-scan of the file's text and page content goes: the reader's own
cap covers more, and the scan miscounted the bytes of unfiltered binary streams.
What 0.8.0 still builds by recursion with no cap is refused when the file opens: functions and
colour spaces built on themselves or on one another more than 16 deep, and calculator functions
whose procedures nest more than 64 deep. The import runs on a 16 MB thread, as the SVG importer
does.
hayro-syntax 0.8 turns on flate2's zlib-rs backend, which the whole app then deflates with: a
compressed native file is the same gzip stream as before (header and data), but its deflate
blocks now depend on how the data is fed, so the streaming test checks the header and the
unpacked data instead of the bytes.
The SVG importer runs on a thread of its own since #1852 (for its stack), and the automation
roots in force on the thread that opened the file didn't hold there: an agent confined to a
read root could have the app read any file an SVG links to. The reads now run in the scope of
the thread that asked.
The decoder's 512 MB limit is on the file's samples; a grey image within it
is four times that once converted to RGBA for the Eyedropper or a recolour,
which the web build can't allocate. The size is now read from the header and
held to the allowance the importers and the renderer use.
The rollback undid the batch's interaction, which holds the art, the selection
and panel state only: a Save As step's new file, format and saved state stayed,
and an Undo step (which ends the interaction) left the art and the history
undone. The batch now keeps the documents as they were and puts them back,
and settles a drag or typing in progress first, as Undo does, instead of
running inside it and keeping its baseline as the batch's step. Files the
steps wrote stay written.
Redo swapped the document and the history under a live interaction, whose
snapshot was still the document from before: the next preview or a cancel
brought that one back while the history recorded the redo, so the redone edit
was lost. Redo now settles the interaction first, the way Undo already did: a
drag that changed something is kept as the newest step (which ends the steps
to redo), one that changed nothing is dropped.
Type's layout bounds are a cache that isn't saved. On open they were
computed again only for type in the layers, so type in a symbol definition
(or a pattern tile, graph design or opacity mask) kept the rough estimate,
and an envelope warping it was fitted to a different box: warped type in a
symbol changed shape after a save and reopen. The refresh now goes through
every art tree, masks included.
A mask's art lives outside the layer tree (in the masked object's extras),
and the walks over linked colours skipped it: editing a global swatch
recoloured everything but the mask, which kept showing (or hiding) as
before, and a swatch used only in a mask counted as unused. The colour
walks now go into opacity masks: map_solid_paints (swatch edits, renames,
deletes, Merge and the like) and visit_paints (unused swatches).
dotCooCoo