Object › Graph › Column… was a menu stub, so a graph's columns and bars
were always plain rectangles. The reference app fills them with a graph
design, vertically scaled, uniformly scaled, repeated with a value for
each copy, or stretched at a guide line.
graph.column (Column…) draws the columns, bars or stacked segments and
the legend swatch of the series picked with Group Selection with a
design saved by Object › Graph › Design. Vertically Scaled stretches the
design to each column's length at the column's width. Uniformly Scaled
scales it both ways to that length and centers it on the column.
Repeating stacks a copy for each Each Design Represents value out from
the zero line, and For Fractions chops the last copy at the value or
scales it down. Sliding keeps the part above the design's horizontal
guide line in proportion and stretches the part below. The design and
its options are saved with the graph, and the graph follows the design
when it is renamed or deleted. Columns drawn with a design cast no drop
shadow.
A marker or legend design made of one path is now drawn in a group of
its own. Painting a series with Group Selection then leaves the design's
paint alone, as it already did for designs of several objects.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object > Live Paint > Gap Options was a stub, and paint leaked through
any gap between the paths of a Live Paint group. The reference app's
Gap Options stop paint at small gaps, close them with unpainted paths
and preview them on the canvas.
livePaint.gapOptions (Gap Options) sets a group's options: detect (Gap
Detection), size (small 3 pt, medium 6 pt, large 12 pt, or a custom
size over 0 up to 72 pt), color (the Gap Preview Color, #rrggbb or a
layer color's name) and closeGaps, which adds an unpainted path across
each gap to the group's paths. A gap runs from a loose end of a path
to the nearest point of any path within the size, unless the paths
already join the two close by. With detection on, the faces are made
again as if a line closed each gap, and each face or edge keeps the
look of the old one it lies in or on. The options are stored on the
group, so they are saved, copied and undone with it, and Expand drops
them. Merge keeps the bottom group's options when its Gap Detection is
on, or else turns Gap Detection on with Small when another merged
group has it on. When Gap Detection is off in every merged group,
Merge keeps it off. livePaint.info lists the options and the gaps up
to the size wide that no path closes.
The menu item opens a Gap Options dialog. With Preview on, the options
apply live and the gaps show on the canvas in the preview color, and
OK keeps them as one undo step. vectorcraft-pathops gains find_gaps
and live_paint_with_gaps.
Docs: docs/mcp.md, docs/target-app-parity.md.
i18n: the 19 complete catalogs have rows for the dialog's labels, and
bg's Gap Options menu label now names gaps instead of line spacing.
Window › SVG Interactivity was a disabled menu item. VectorCraft could
not attach JavaScript to an object's events or link JavaScript files
for SVG export.
The SVG Interactivity panel lists 19 events, from onfocusin to
onscroll. Pick one, type its JavaScript and press Enter to add it to
the selected objects; the list shows their events. Remove Selected
Entry removes the picked event, and the panel menu's Clear Events
removes all of them. Link JavaScript Files… opens the JavaScript
Files dialog, which adds a path or URL to the document's list and
removes the selected one. Its Choose… button puts a picked file in
as a file:/// URL. The commands are svgInteractivity.info,
setEvent, removeEvent, clearEvents, addFile and removeFile, and
ui.javascriptFilesDialog. Each edit is one undo step. A document
links at most 64 files.
SVG export writes each event as an event attribute on the object's
element and each file as a <script xlink:href> element. With the SVG
Tiny 1.2 profile, export leaves the events out with a warning. SVG
import reads the listed event attributes and the script links back
as text. It never reads a linked file or runs a script, and it leaves
inline scripts and the links after the first 64 out with a warning.
The native format keeps both.
An unnamed <g> with data-* attributes of its own around a single
object now imports as a group. Before, import folded it into the
object, which then took the group's data-* or, when it had its own,
dropped the group's. An unnamed <g> with event attributes stays a
group in the same way. The SVG import fuzz tests now include event
attributes and <script> elements.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
docs/ui-parity.md.
Type › Optical Margin Alignment was a disabled menu item. The reference
app's Optical Margin Alignment hangs Roman punctuation and the edges of
letters such as W and A outside the margins of every paragraph of a
type object.
type.opticalMarginAlignment (Type › Optical Margin Alignment) turns it
on or off for the selected type in one undo step, and the menu item is
checked while the type has it on. In every left-to-right paragraph of
point and area type, quotation marks, hyphens, full stops and commas at
a line's start or end hang wholly outside the margin there. Asterisks,
tildes, ellipses, en and em dashes, colons and semicolons hang by half
their width, and A, V, W, Y, v, w and y hang by a tenth of theirs. A
punctuation mark followed by a quotation mark hangs with it.
Left-aligned lines hang at their left margin, right-aligned lines hang
at their right margin, and centered and justified lines hang at both.
Lines break where they did before, and the space that justification
adds between glyphs leaves out the gaps next to a hanging punctuation
mark.
The setting is off for new type and for documents from before it, and
the type object saves it only when it is on.
The Type menu's checks for Optical Margin Alignment, Type Orientation
and the Type on a Path effects now read the type inside a selected
group, as the commands do.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Object > Expand with Fill expanded gradient fills only. A pattern fill
stayed a live pattern, and object.expand.info did not report it, so the
dialog's Fill option was disabled for it. In the reference app, Expand
with Fill turns a pattern fill into the pattern's tiles, and the shape
becomes their clipping mask.
The Fill step now turns each visible pattern fill of a path or compound
path into a clip group shaped like the object, holding the tiles the
pattern lays over the object's box with fresh ids. The group isolates
the tiles' blending and takes the fill's opacity, blend mode and other
effects. Geometry effects of the fill or the object, such as Offset
Path, shape the group's outline and the box the tiles cover. A path in
the tile art with a random Transform effect is baked with its own id
first, and a path with a brush that varies at random (calligraphic or
scatter with Random variation, or bristle) is baked where the pattern
defines it first, so every tile matches the canvas. The object's other
fills and strokes stay on copies of it in paint order, and Expand stays
one undo step. Type with a pattern fill expands the same way once
Object outlines it, and object.expand.info reports pattern fills under
fill. It also reports gradient fills under a new gradient key, and the
dialog enables Expand Gradient To only when the selection has one. A
pattern fill stays as it is when it lays no tiles over the box, when a
group or type in its art has a random Transform effect, when the
pattern is scaled, rotated, reflected, stretched or sheared and its art
holds a symbol instance, and when the pattern is rotated, reflected,
stretched or sheared, or scaled while its art has geometry effects, and
its art has raster or 3D effects, or a geometry effect on a group or
type.
PatternDef gains instances_in_with, which places the tiles with a given
Scaling. Expand has stroke weights, effect distances and the tiles' own
pattern paints scale with the pattern's transform. When the pattern is
rotated, reflected, stretched or sheared, or scaled while its art has
geometry effects such as Roughen, the strokes and geometry effects of
the tiles' paths become filled art first (bake_appearance, and Outline
Stroke's conversion for brushed strokes), and their live shapes become
plain paths, in their opacity masks too. Tiles place their opacity
masks with them, unlinked ones included (place_art), which also fixes
unlinked masks in pattern tiles in PDF, EPS, EMF and WMF export and in
Distort Pattern Fills.
Faults in the shared code are fixed for every caller. assemble
dropped the effects of a sole part, so Expand lost a lone gradient
fill's own effects and Outline Stroke lost those of a stroke with a
gradient along or across it. Outline Stroke also dropped a brushed
stroke's raster effects from its brush art. Expand replaced an object
whose gradient fill could not be expanded with a plain copy; it now
leaves it as it was. Expand left the geometry effects of a gradient
fill, and with Object off those of the object, on the expanded art,
where they reshaped every strip; they now shape the clip group's
outline, and the gradient fits it, as for pattern fills.
bake_appearance dropped a stroke's raster effects from its filled
outline and filled the outline of a stroke with a gradient along or
across it with a gradient across the outline's box; it now keeps the
effects and makes the gradient meshes clipped to the outline, as
Outline Stroke does. Envelope Options > Distort Appearance uses it too.
PatternDef::offsets_covering overflowed on a region too large to count
in integers, as for a pattern scaled by 1e-20; it now gives no offsets.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md.
The toolbar listed the Touch Type tool (Shift+T), but choosing it did
nothing. The reference app's Touch Type tool moves, scales and rotates
one character of live type by dragging the handles of a box around it.
A click with the tool now selects one character and shows a box around
it. Dragging the box or its lower-left handle moves the character along
its line and up or down. The upper-left handle scales it vertically,
the lower-right handle scales it horizontally, the upper-right handle
scales it proportionally, and the upper-middle handle rotates it. A
character rotated by up to about 84 degrees follows the pointer too.
Near a quarter turn, a drag moves it only along its line. Escape
cancels a drag, and otherwise lets go of the character.
Each drag is one text.touchType command and one undo step. It sets the
character's baseline shift, scales and rotation, and moves it along its
line by changing its own kerning and the kerning of the character
before it, within the kerning range. The characters after it stay
where they are. Where the font kerned the character with its
neighbors, the two kerning values also keep the character in place
when it is only raised, scaled or rotated. The characters after it
stay where they were, or move by the change in its width when it is
scaled. The first character of a line and a right-to-left character
move only up and down. The type stays editable.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
File > Place read text files only as plain `.txt`, and an RTF file
could not be placed. The reference app lists RTF among the formats it
places as text, keeping the file's font and style settings.
File > Place now reads RTF files, written from the Rich Text Format
Specification 1.9.1, and sets their text as area type the way a text
file is placed. Each run keeps its font from the font table, its size,
bold and italic, underline, strikethrough, all caps, small caps,
superscript or subscript (in Document Setup's proportions), baseline
shift and its color from the color table. Each paragraph keeps its
alignment, left, right and first-line indents, space before and after,
and direction. Table cells are separated by tabs and each table row is
a paragraph. Unicode characters, Windows-1252 and Mac Roman bytes and
the special-character control words are read, and of a \upr group's
ANSI and Unicode text, the Unicode text is read. Hidden text, pictures,
objects, headers, footers, notes, field instructions and other
destinations are left out, and unknown control words are skipped.
A file is read as RTF when it starts with {\rtf, whatever its name,
except a .txt file, which stays plain text. RTF files share the 4 MiB
limit of text files. Groups nested more than 512 deep share the
formatting of the deepest one read, the font and color tables keep at
most 4,096 entries, and a file with more than 100,000 paragraphs or
runs is refused. The Place dialog lists RTF files, and file.place,
file.place.info and file.place.queue report the format `rtf`.
The tests in tests_textimport.rs fail without the change, and
text_import_fuzz.rs places random RTF token streams.
Docs: docs/file-format-parity.md, docs/mcp.md,
docs/target-app-parity.md.
A Shift-click or Ctrl/Cmd-click on a brush in the Brushes panel used to
apply the brush, as a plain click does. It now selects brushes without
applying one. Shift-click adds the brushes from the last brush clicked
without Shift (else the highlighted brush) to the clicked one, in the
order the panel shows them. Ctrl/Cmd-click adds the clicked brush to the
highlighted brushes or removes it. The panel highlights the selected
brushes, and the bottom bar's Delete Brush and the panel menu's
Duplicate Brush and Delete Brush act on all of them. A plain click
works as before and ends the multi-selection, and so does selecting
other art, another document or another current brush.
brush.delete and brush.duplicate also take {names: [name...]}. Each
call is one undo step, and an unknown name fails before anything
changes. brush.duplicate answers {names} for a names list.
Docs: docs/mcp.md, docs/target-app-parity.md.
Shift pressed while dragging a segment had no effect on the curve:
Direct Selection's curved-segment and spine-segment drags, the Anchor
Point tool and the Pen with Alt sent the pointer offset alone, and the
segment bent freely. The reference app keeps the handles in the
perpendicular direction and of equal length while Shift is held.
path.reshapeSegment and object.blend.spine.reshapeSegment take
perpendicular (default false, which keeps today's behavior). With it,
both of the segment's handles stand at right angles to the line between
its anchors, on the same side and at the same length, and the point at
t lies as far from that line as the moved point does. A smooth anchor
at either end stays smooth, as it does in a drag without perpendicular,
and a segment whose anchors coincide bends as it does without
perpendicular. With Direct Selection, Shift pressed once a curved
segment's drag has started sends perpendicular; Shift held at the press
still toggles the path's selection, as before. Direct Selection's
spine-segment drag and the Anchor Point tool's segment drag send Shift
as perpendicular too, so the Pen with Alt does as well. A straight
segment dragged with Direct Selection already moves at 45° steps with
Shift.
Docs: docs/mcp.md, docs/target-app-parity.md.
The EPS reader read PostScript by any name, but the Open and Place
dialogs hid .ps and .epsf files, and a .ps or .epsf file whose header
is only %! could not be opened or placed ("not a format VectorCraft
reads"). The reference app lists .eps, .epsf and .ps under Open and
Place.
- A read-only PostScript format (ps) joins the format table. A .ps
file opens and places through the EPS reader and reports the
ps format. document.export does not write .ps; file.print does.
- .epsf is an EPS extension.
- OPEN_EXTS and PLACE_EXTS list epsf and ps, so the dialogs, the CLI
help and the MCP open_file description list them.
UNASSOCIATED_EXTS lists them too: the macOS bundle declares neither.
- A .ps or .epsf file whose header is only %! now pastes as EPS when
copied in a file manager, as one with a %!PS header already did, and
clipboard.importEps reads PostScript whose header is only %!, which
it rejected before.
Docs: docs/mcp.md, docs/file-format-parity.md (.ps row),
docs/target-app-parity.md.
Native files remember the grid like the saved view, so reopening restores it.
Toggling it is still view state: no undo step, document not marked modified.
Fixes#1968
With several artboards selected, the Artboards panel menu's Duplicate
Artboards copied only the active one, and Copy and Cut with the
Artboard tool took only the tool's active artboard.
artboard.duplicate, artboard.copy and artboard.cut now take `indices`,
and without `index` or `indices` they act on the artboards the
Artboard tool has selected. Duplicate Artboards passes the selected
artboards and selects the copies. Duplicate and Cut are one undo step
each, and Paste adds every copied artboard back, with its art, in one
undo step. The copies keep their places relative to each other,
together right of the last artboard. A cut fails when it names every
artboard.
Docs: docs/mcp.md, docs/target-app-parity.md.
file.saveAsTemplate kept a name whose extension named another format
and wrote the template into it: {path: "card.png"} wrote .vctemplate
JSON to card.png, and card.pdf typed in the desktop save panel got it
too. file.saveAs {format: "ait"} answered that document.export writes
other formats, but document.export does not write .ait either.
file.saveAsTemplate now replaces another format's extension (card.png
is saved as card.vctemplate, or card.ait for format: "ait") and adds
the extension to a name whose extension names no format. The desktop
panel adds the template's extension to any name that does not end in
a template extension (card.pdf.vctemplate), as Save As adds its own.
Save and Save As still refuse ait, and the error now names
file.saveAsTemplate.
Docs: docs/mcp.md, docs/target-app-parity.md.
effect.apply and effect.setParams stored any string as the color of
Drop Shadow, Inner Glow, Outer Glow and Shift to Color. When the
effect could not read it, it drew its default color with no message,
so a typo such as #ff00 in the Drop Shadow dialog turned the shadow
black.
The commands now refuse such a color before they edit, with
"`color` must be a #rrggbb color", and the document and its undo
history stay as they were. Hex colors, the five named colors,
[r, g, b] and color objects still pass. The check runs in the
commands, so the app, command.batch steps and replayed journals get
it too. The effect dialog's OK shows the error and keeps the dialog
open, with Preview on or off. Saved documents open as before.
Docs: docs/mcp.md (effect params).
A raster export warns that "an image couldn't be decoded and is
missing from the picture" when the count of failed decodes rose while
it drew. A pattern fill draws from a tile kept for each thread, and a
tile taken from that cache draws none of its art. Only the export that
made the tile counted the image, and later exports of the document gave
no warning although their pictures lacked the image too. The raster
kept for a blurred or filtered object had the same fault: the renderer
that draws pattern tiles keeps those rasters from one tile to the next,
so a tile drawn again took such an object from its raster and counted
nothing.
A kept tile and a kept effect raster now store how many decodes failed
on their thread while they were made, and each draw from them adds that
number to the count again.
A style captured from text left out the attributes that the text's
JSON skips at their defaults, such as the Hyphenation options, the
Composer, tab stops, Auto kerning and the character alignment.
Redefining a paragraph or character style from text set
back to the defaults therefore did not reach the text using the
style: a paragraph that had the old Hyphen Limit or Single-line
Composer from the style kept it. setAttrs dropped a default value it
was given in the same way.
New and Redefine now capture every attribute of the selected text,
and charStyle.setAttrs and paraStyle.setAttrs keep a default value.
When a style changes, text whose value equals the old definition's
takes the new value, a default included. Local overrides on text that
uses a style other than the Normal styles stay, and an attribute that
setAttrs leaves out still leaves the text's value alone. The Character
Styles and Paragraph Styles panels compare the attributes a style holds
with the same attributes of the selection. A paragraph style made from
type with Auto alignment no longer shows "+" on that type.
Two existing behaviors change. Applying a style made with New or
Redefine from text, without Clear Overrides, now also sets the
attributes that text had at their defaults, such as Auto kerning, no
OpenType features, the Every-line Composer, no tab stops and the
default Hyphenation options. Redefining [Normal Paragraph Style] or
[Normal Character Style] from text gives every paragraph or run that
uses it those attributes too, so local values of them on that text are
reset.
Docs: docs/target-app-parity.md.
Batch over data sets names each output file after the document and the
data set, as the reference app's File + Data Set Name option does. It
joined that name onto the destination folder as it was, and a data set
name can hold any character. A data set named a/b failed to save, and
one named a/../../x wrote its file outside the destination folder. On
Windows, one named c\d also failed to save, and one named e:f left an
empty file.
The data set's name now goes through file_part, which Export for
Screens uses for its file name prefix and a format row's suffix, so
output file names have - in place of /, \ and : from a data set's name.
When two data sets then give the same name, compared without case, the
later ones get -2, -3 and so on, as artboard file names do, through a
distinct_names helper split out of unique_file_names. This covers the
folder destination and Override Save/Export.
Docs: docs/mcp.md, docs/target-app-parity.md.
TIFFs that store each channel as its own plane (PlanarConfiguration 2)
did not open, place or relink when they were CMYK or grayscale with
extra channels: the image decoder refuses planar CMYK, and the readers
for CMYK inks and for extra samples returned nothing for planar files.
The two readers now read every plane through the tiff crate and put
each pixel's samples together. A planar CMYK TIFF keeps its ink
amounts and is stored as a CMYK TIFF with each pixel's inks together,
at the file's resolution. Grayscale TIFFs with an alpha channel or
other extra channels, and CMYK TIFFs with alpha, read as their chunky
versions do.
A TIFF whose header claims more strips or tiles than the tiff decoder
can count is refused as too large to draw. The decoder multiplies
those counts without a check, which panics in builds with overflow
checks.
Part of #1466.
Docs: docs/file-format-parity.md, docs/target-app-parity.md.
dataset.import read only commas between cells and refused a file whose
first header cell wasn't `name`. A value that didn't match its
variable's kind, and a repeated data set name, were reported with the
row's record number, which is not the file line after a blank line or a
quoted line break. A data set name over 255 characters gave no line.
- When the header row, read with tabs between cells, has a tab and no
comma outside quotes, tabs separate the cells. A quoted cell may then
hold tabs and commas.
- Without a `name` column every header cell is a variable, and the rows
take the first free names Data Set 1, Data Set 2 and so on, as Capture
Data Set and blank name cells do. A first header cell `name`, in any
case, still holds the data set names.
- Value errors, a repeated data set name and a name over 255 characters
give the file line the row starts on.
- The Variables panel's Import Data Sets… dialog also lists .tsv files.
- import_fuzz.rs imports random text, random bytes and mutated exports,
comma- and tab-separated, into a document with bound text, visibility
and graph variables, selects up to three of the imported data sets in
turn, and exports every data set.
Docs: docs/mcp.md, docs/target-app-parity.md.
file.print, print.preview and print.setup took print settings only as
settings, so an agent had to read a preset with print.presets.list and
copy its settings into the call. They now take preset, the name of
[Default] or of a saved print preset in any case. The preset's settings
are used instead of the document's, settings applies over them, and
print.setup saves them with the document as one undo step. An unknown
name is a parameter error that lists the presets. The app's file.print
with params passes preset on to the engine.
Docs: docs/mcp.md, docs/target-app-parity.md.
PDF presets are kept one file each in a PDF Presets folder, ICC profiles as copies in a Color Profiles folder, next to the preferences; the desktop app and vectorcraft-cli use them. Adds color.removeProfile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The MCP server read one line, ran it and answered it before reading the next,
so notifications/cancelled was never seen during a call and every request
(even ping) waited behind a running export.
- vectorcraft_doc::cancel: a thread-local cancel token and progress sink that
long work polls. Checkpoints: PDF pages, PDF flattening, geometry bake,
raster-effect flattening, drawing objects, raster artboards, and before any
file is written. A cancelled command returns EngineError::Cancelled and
changes nothing.
- Server::serve reads on its own thread: notifications/cancelled drops a
queued request or stops the running one (no reply, as the MCP spec says),
engine-free requests (ping, the list methods, prompts/get) are answered at
once, a request that would wait behind a call running for 2 s is refused
with -32003 naming that call, and _meta.progressToken gets
notifications/progress (page n of m). Queue and output are bounded.
- The remote backend stops waiting for the app when the call is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A path with a Transform effect that makes copies and a gradient was still merged into one path by bake_leaf and expand_leaf, so the gradient spanned every copy. Route it through reshape / expand_outlined like the renderer does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.setProps and artboard.fitToSelection read an `index` that is
negative, fractional, a string or null as 0 and edited the first
artboard, and artboard.setProps edited the first artboard when the
call named no `index`. artboard.duplicate, artboard.copy and
artboard.cut took the Artboard tool's artboard for such an `index`.
artboard.reorder failed for it with "missing index".
These commands now read `index` as artboard.delete, artboard.move and
artboard.fitToArt do, and fail with "no such artboard" when it names
no artboard; the document and the clipboard stay as they were.
artboard.setProps without `index` fails with "missing index". Without
`index`, artboard.fitToSelection still fits the first artboard and the
copy commands still take the Artboard tool's artboard.
Docs: docs/mcp.md.
Found while testing crates/doc/src/graph.rs:429 (GraphSpec::to_csv) and crates/engine/src/cmd/graph.rs:85 (parse_csv)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
document.rasterEffectsSettings accepts a resolution from 1 to 2,400
ppi, but a file's raster_effects_ppi opened as it was saved. With 0,
-5 or 5000 in the file, object.rasterize without a ppi param failed
with "ppi must be between 1 and 2400", and document.rasterEffectsSettings
and document.info reported the stored value. With 0 or -5, EPS and
PDF export wrote a freeform gradient as a 1 x 1 px image, and EMF
export wrote every gradient as one. A saved New Document preset in the
preferences kept such a value too.
A file's or a saved preset's resolution outside 1 to 2,400 ppi is now
read as the nearer end of that range. Documents with a resolution in
range open as before.
Docs: docs/mcp.md (resolution, rasterEffectsPpi).
Expand had nothing for Intertwine groups. It reported success but left
the group live (it only dropped the members' live shapes), and its
Stroke and Fill options could not reach the members, so a second Expand
found nothing to do. Ungroup takes apart plain groups only, so it did
nothing either.
Expand's Object option now turns every Intertwine group in the selection
(inside groups too, inner ones first) into a plain group of what it
draws: its objects, keeping their ids and order, then each part drawn
over the others as a clip group. The group keeps its id, place,
transparency and appearance, everything happens in one undo step, and
the dialog enables Object for an Intertwine group. Ungroup then takes
the result apart, as with an expanded blend or repeat.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reverts the fallback that merged the layers of art selected on the canvas when no
layer row is highlighted: Illustrator's Merge Selected merges the highlighted rows
into the last one highlighted.
With no highlighted rows and art selected in two or more layers (Select All), layer.merge merges those layers; the panel menu enables it then.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The overflow marker was drawn by the Type tools only, so with the Selection tool a text box smaller than its text showed no sign that text was hidden. Session::overlays now adds the marker of every selected area type and type on a path that overflows, unless a Type tool is active (it draws its own). The verdict is cached per object and font generation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On main, cargo xtask wasm printed an unused-import warning for json in
crates/engine/src/cmd/fileio/action_batch.rs, and this check reported
it as an error:
RUSTFLAGS=-Dwarnings cargo check -p vectorcraft-engine --target wasm32-unknown-unknown
Every use of json! in action_batch.rs is in code compiled only for
native targets. The wasm32 version of action_batch uses Value only.
The json import now has the same #[cfg(not(target_arch = "wasm32"))]
attribute as the code that uses it. Native builds import the same
names as before.
Found while testing crates/engine/src/cmd/graph.rs:193 (fmt_value)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
document.rasterEffectsSettings accepts addAround from 0 to 1,000 pt,
but a file's raster_effects.addAround opened as it was saved. With
addAround 1e300, the area of a raster effect image overflowed f64,
the image scale became 0 and the image got the transform
[inf, NaN, NaN, inf, x, y]. PDF export left that image out, so the
drop shadow was missing.
A file's addAround now opens clamped to 0 to 1,000 pt. An effect
image whose area or scale is not finite is not made. Export then
keeps the object with its effects, and Expand Appearance expands it
without an image, as when its PNG can't be encoded.
Docs: docs/mcp.md (addAround).
Crop Image's trim (object.cropImage {trim: true}) decoded the image
within MAX_RASTER_ALLOC (2 GB) and then converted it to RGBA. The
decoder holds the decoded image, before conversion, to that allowance,
so a gray or 1-bit image within it could take up to four times as much
once converted.
Trim now reads the image's size from its header first and, when
width × height × 4 is over the allowance, fails before anything is
decoded, with the check and message Load Texture uses: "an image of
W × H pixels is too large to draw". Images within the allowance are
trimmed as before.
A raster export compared the process-wide count of images that could
not be decoded before and after it drew, and warned that "an image
couldn't be decoded and is missing from the picture" when the count
rose. Any other thread that failed to decode an image in that time
raised the count too: a second export, the UI thread drawing the
canvas, or the canvas, thumbnail and placed-document workers drawing a
document with such an image. The export then warned about an image it
does not contain. In the engine's tests,
options_not_applied_yet_and_document_features_warn failed in 5 of 60
runs of the tests_raster and tests_pdf* tests.
The count is now kept per thread. An export reads it on the thread it
draws on. That thread decodes every image the export draws that is not
already in the shared image store, and an image that failed to decode
is never stored.
Node editing as the public manual describes it: Direct Selection's anchor squares (hollow
or filled), Reshape Segment over a curved segment, Group Selection's plus (also Direct
Selection with Alt), the arrow hollow while a drag snaps, and Alt-copy arrowheads. The
Anchor Point caret, the Curvature pen and Free Transform's side-shear arrows (ShearH,
ShearV) are drawn in code. Lasso, the freehand, symbolism and other tools return cursors
of their own that borrow their old look until drawn (Cursor::stand_in).
crates/tools/src/cursors.toml lists every Cursor value, when it shows and its hotspot,
for whoever draws them; `cargo xtask cursors` (in ci) warns about a missing, unknown,
repeated or incomplete entry and never fails. The busy cursor is listed as missing (G1).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
View › Guides › Release Guides only cleared the guide flag on paths
made with Make Guides. Ruler guides could not become paths by any
route, and with only ruler guides selected the command released every
guide path in the document instead.
Release Guides now also releases the selected ruler guides. Each one
becomes an open straight path with no fill or stroke at the top of the
guide's layer: an artboard guide runs across its artboard, and a
canvas guide runs across the bounds of all the artboards. The ruler
guide is deleted, the released paths are selected, and the release is
one undo step. With no guide selected, every guide path is released,
as before.
view.guides.release takes index (a ruler guide) and ids (guide paths,
and the guide paths inside them). Both are refused while guides are
locked, and index takes only a guide on a shown, unlocked layer.
Docs: docs/mcp.md, docs/target-app-parity.md.
Issue #1935 asks for batch exports of many logo variations in many
formats, each format in its own folder. This builds on Export for
Screens, which already writes every chosen artboard in every format row.
Names: a file name pattern (`name`) names every file alike. Tokens:
<filename> (the document), <name> (the artboard, asset, layer or
object), <index>, a run of # (a counter, zero-padded to the run's
length, from counterStart; counterPer item or file), YYYYMMDD,
YYYY-MM-DD, <date>, <time>, <YYYY>, <MM>, <DD>, <format>, <scale> and
<suffix>. A trailing .ext is dropped. Words are not changed: only the
date patterns and the bracketed tokens are. `date` sets the day (the
default is today, UTC). Different files that a pattern names alike get
-2, -3... Without a pattern, two rows with one name still write the
first row only, as before.
Folders: `folders` puts all files in one folder, a folder per row (as
Create Sub-folders did), per extension, per item, or per item and then
extension.
What is exported: besides artboards, assets and the full document,
`layers` (each layer's art alone, sublayers included) and `selection`
(one file of the selection, or a file per object).
Formats: rows can also be EPS, AI and VectorCraft (a document of the
item alone, its one artboard). A PDF row with printer's marks (PDF
Print in the dialog: trim, registration, colour bars, page information,
suffix -print) sits next to a plain PDF row.
Presets: document.exportPresets.list, .save and .delete keep batch
export presets with the preferences, and `exportPreset` uses one under
the call's own params. Built-in: Logo Package (SVG, PNG 1x and 2x, PDF
and print PDF, a folder per format) and Print-Ready PDF.
Dialog: Layers and Selection tabs with thumbnails; an Export Preset
menu with Save and Delete; Folders; File Name with Insert for the
tokens, Start at, Prefix, and an example of the first file's name. The
OK button says Export Layer or Export Selection on those tabs.
Tests: the pattern tokens, the request's example (SVG, PNG, PDF and
print PDF for artboards 1-3, a folder per extension, the print PDF a
bigger page), folders by item and both, the counter by item and by
file, numbered duplicates, layers and the selection, EPS, AI and
VectorCraft per artboard, presets (built-in, saved, used, replaced,
deleted, kept with the preferences), bad params, and the dialog (every
tab, the example name, a pattern export into folders, the Layers and
Selection tabs, presets applied and saved). The three tests that
refused EPS and VectorCraft rows now check those files. New labels
are translated in all 19 catalogs.
dotCooCoo