A heartbeat alone can't tell a crashed tab from one whose timers stopped in
the background, so another tab could discard (or restore) the copies of a
still-live document once its heartbeat went stale.
- Recovery stores without locks can now announce an area for as long as the
app runs (RecoveryStore::announce/announced). The web shell implements it
with the browser's Web Locks (navigator.locks through js_sys::Reflect): a
tab holds a lock named after its area, which the browser releases only when
the tab is gone. Lock snapshots are refreshed every 10 s (once before the
first frame); a snapshot over a minute old counts every area as held.
- An area is gone only when no announcement holds it and its heartbeat is
stale. Where the store can't tell (no Web Locks), the owner repairs: each
heartbeat (also its first frame after a pause) and each recovery save write
again the copies missing from its area, and a heartbeat newer than the one
another tab wrote when taking the area over marks it running again.
- MemoryStore::announcing models Web Locks in tests; engine and UI tests cover
the issue's sequence. Native folder locks are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Japanese layout measures leading from the top of one line's ideographic
em box to the next (the right side, in vertical type), not from baseline
to baseline. The Paragraph panel menu now offers both:
- `ParaStyle.leading_model`: RomanBaseline (as before, the default) or
EmBoxTop. With EmBoxTop a line's leading is the space below it — the
next line's em box top is this line's plus its leading, and the next
baseline hangs from there by that line's tallest em box — and area
type's first line touches the top of the frame (its em box top on the
frame's top, at least Area Type Options' minimum). With baseline
leading a line's leading stays the space above it.
- Lines of one size are exactly as far apart either way; the models
differ for mixed sizes and for the first line of area type (fonts
whose ascent isn't the em box top: Hiragino's nearly is).
- The em box top comes from the font's vertical metrics (#343), else
0.88 em. Written only when EmBoxTop.
- `text.setFormat {leadingModel: "romanBaseline"|"emBoxTop"}`; menu items
Top-to-Top Leading / Bottom-to-Bottom Leading (checked as set); catalog
rows in ja and zh-hant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Rotate, Scale, Reflect and Shear tools answer Enter with their
dialog, but the shortcut handler only applied what a tool asks of the
UI for the keys it claims, so the request was dropped and Enter did
nothing. It now applies it for Enter, and consumes the key when a
dialog opened, since a dialog takes Enter as its OK in the same frame.
The Selection, Direct Selection and Group Selection tools open the
Move dialog the same way, on Enter and on a double-click on their
toolbar button (`tool.options`), as Object > Transform > Move does.
With nothing selected neither opens anything.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Opening a PDF whose fonts aren't installed keeps the text live in the fallback font (as
Illustrator substitutes and highlights missing fonts), and opening said so, but every export
then wrote the fallback font silently ("warnings": []), so a headless convert re-set the type
without a word.
- Exports that draw type now say so in their warnings, naming the missing families and the
fallback font: PDF (outlined or real text, also .ai and Save As), EPS, EMF/WMF, raster images
and SVG with outlined or embedded fonts. Live SVG text, DXF, text and native files name the
font itself and don't warn. Replacing the font (Find Font) clears it.
- The fonts a document uses (text.fonts' scope, Package's font list) come from one helper.
- textAs: outlines already keeps the glyphs the PDF draws (its embedded font program, installed
or not): now covered by a test with an embedded serif font that isn't installed, checked
against the installed font's and the fallback's outlines.
- docs/mcp.md and ROADMAP describe the warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A PDF's DeviceCMYK image opened as RGB (the interpreter's pixels as a PNG),
so every export wrote it as DeviceRGB or ICC RGB, silently. Images now keep
their CMYK samples, as CMYK colours already did:
- Model: CMYK images are blobs holding CMYK samples, a four-component JPEG
(Adobe's inverted samples) or a Deflate CMYK TIFF. vectorcraft-doc's cmyk
module reads their ink amounts (ImageBlob::is_cmyk, ::cmyk, capped at 64
megapixels) and writes the TIFF (ImageBlob::cmyk_tiff).
- PDF import: DeviceCMYK, CalCMYK and four-component ICC images keep their
samples. A JPEG with Decode [1 0 1 0 1 0 1 0] is kept byte for byte; any
other is decoded (8 or 16 bits, its Decode array applied) and stored as a
CMYK TIFF. Masked CMYK images and 1/2/4-bit ones open in RGB with a warning.
Placing a CMYK TIFF keeps it CMYK too.
- PDF export: CMYK images are written in CMYK (DeviceCMYK, or ICC-based with
the CMYK profile when colours are tagged: PDF/X-3, PDF/X-4, PDF/A). A CMYK
JPEG neither resampled nor recompressed passes through unchanged; others are
resampled in CMYK and compressed as ZIP or as a CMYK JPEG (jpeg-encoder,
which also replaces the ZIP fallback and its warning for images converted to
CMYK). Output conversion treats them like CMYK colours: Preserve Numbers and
PDF/X-1a keep their numbers, Convert to Destination converts them to another
CMYK profile or to RGB through a 17^4 lookup table (cms::CmykLut, now also
behind the renderer's ink table). A CMYK image that can't be decoded is
reported in the warnings.
- Canvas: CMYK images show through the working CMYK profile, as CMYK fills
do, and paint their own inks in ink planes (CMYK raster exports, CMYK
blending). SVG export writes TIFF images as PNG.
Illustrator's Output › No Conversion keeps colour data as it is
(https://helpx.adobe.com/illustrator/using/pdf-options.html).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A PDF-compatible .ai paints the editor's page (an opaque white rectangle the
size of the page) before its first optional-content layer and outside every
layer. It came in as art: an extra "Page 1" layer with a page-sized white path
behind the artwork, which hid white art and gave SVG/PNG/PDF exports an
opaque background.
For pages with the editor's private data (the way the importer already tells
a .ai from a PDF), the first art outside every layer, painted before any
layer, is dropped when it is a plain fill-only rectangle in an opaque,
non-spot white, with normal blending, equal to the crop box (0.5 pt
tolerance). Plain PDFs keep such a rectangle as art (as the reference app
does when opening a PDF), and so does anything else: grey, smaller or larger
rectangles, strokes, translucency, white inks, fills over the layers.
The white-cover test the soft-mask reader used is now a shared helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Adds a Spanish catalog (crates/ui-egui/src/i18n/es.tsv) covering the whole
interface like Japanese and Traditional Chinese: every menu string, every
tl! literal, the hint-bar fragments, plurals and the runtime strings the
other complete catalogs carry. It is written from the meaning of the
English labels in neutral, international Spanish (Latin American usage)
with the vocabulary users of vector illustration software know (Mesa de
trabajo, Muestras, Trazo, Relleno, Trazado, Pluma, Selección directa,
Buscatrazos, Motivo, Preajuste); no other application's localisation was
copied. Like Japanese it keeps the product, OpenType, the built-in
workspace names and the perspective grid preset names in English.
The language is registered with complete_menus (so the completeness
tests enforce it) and the one/other plural rule; every es-* system locale
(es-ES, es-MX, es-AR, es-419 ...) resolves to it.
Tests: es locale tags, Spanish vocabulary and plurals, Spanish letters in
the bundled UI fonts, and a new check that catalogs written with spaces
keep the leading/trailing spaces of joined fragments. ROADMAP, README and
docs/development.md list the language.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Drop the workspace [patch.crates-io] and restore windows-link's crates.io
source and checksum in Cargo.lock, so every normal build keeps the
checksum-verified crate. windows7.ps1 now applies vendor/windows-link with
--config, checks that only windows-link's lock entry moved, builds and tests
with --locked, checks the patched crate is the one in use, and restores
Cargo.lock afterwards.
- windows7.yml runs on demand and weekly instead of on every PR, pins every
action by commit SHA, and leaves the dependency check and host tests to the
script (-Test) so the Cargo arguments live in one place.
- ROADMAP, README, NOTICE and docs: experimental, unsupported, not verified by
maintainers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Up/Down stepping of #357 now serves every numeric field through one
helper: num_field (lengths, in their unit) and plain/mixed fields
(degrees, percent, counts, at their precision: a count ignores the
Ctrl/Cmd tenth), as in Illustrator's panels and dialogs. After a step
the new value is selected, so typing replaces it. The select-all code
the dialog focus and focus/double-click already duplicated becomes one
helper, and the tests move to tests_numfields.rs with its field harness
(which can now run with the window unfocused). ROADMAP.md notes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Alt held, a press on a path's stroke selects the whole path and
an Alt-drag copies it, as before #363 and as Group Selection does in
Illustrator; only a plain press on a segment selects its anchors and
reshapes it. Records the segment drag in ROADMAP.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Finder, Open With, a drop on the Dock icon and `open -a` failed with "VectorCraft cannot open
files in the PDF document format":
- The release Info.plist declared no document types, so Launch Services refused the files before
the app saw them. Info.plist.in now declares every format File › Open reads (the engine's
OPEN_EXTS; a test keeps them in step): VectorCraft owns its own documents and templates and is an
alternate for the others, so it takes over no other app's files. `cargo xtask bundle` now fills
in the same template instead of its own, shorter plist.
- macOS delivers such files as open-document events, not arguments. winit 0.30's application
delegate has no `application:openURLs:`, so AppKit fell back to NSDocumentController, which
refuses every file of a non-NSDocument app (the error in both issues). The new
`open_documents` module adds that method to the delegate's class when the app is about to finish
launching (before AppKit delivers launch files), queues the paths and wakes the UI, which opens
them with `io::open_path` like command-line files; errors go to the status bar too.
New direct macOS dependencies `objc2-foundation` 0.3 and `block2` 0.6 were already in Cargo.lock
(through winit, muda and rfd). The module allows `unsafe_code` for the Objective-C runtime call.
Fixes#354
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The web reads dropped files asynchronously, and the place inbox only kept
the drop point, so a file dropped on document A was placed into whatever
document was active when its bytes arrived. A drop on a canvas now carries
place::DropAt (the document's uid, the point, embed), and drop_files makes
that document active again before placing; when it has closed meanwhile,
nothing is placed and the status bar says so. The native drop path is
synchronous and goes through the same code, so it is unchanged in effect.
Test: a drop pending while another document opens lands in the first one
at the drop point; one whose document closes is not placed anywhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Taiwan vocabulary left over from the zh-hant rows #303 started from is
replaced with the mainland's, about 560 rows: 档案 → 文件, a Taiwan 文件
(document) → 文档, 工作区域 → 画板, 笔画 → 描边, 色票 → 色板, 遮色片 → 蒙版,
渐层 → 渐变, 偏好设定 → 首选项, 快速键 → 快捷键, 按一下 → 单击, 描述档 → 配置文件,
品质 → 质量, 汇出/汇入 → 导出/导入, 连结 → 链接, 点阵 → 栅格, a row 列 → 行,
「」 → “”, half-width parentheses; tool names that collided or were wrong
are fixed (Selection Tool 选择工具, Scale Tool 比例缩放工具, Warp 变形,
Puppet Warp 操控变形, Divide 分割, Exclude 差集, the 直排 type tools).
- 42 rows for strings that landed after #303 (Layers panel, graphics
processor preference, panel collapse, the font menu's filters).
- A catalog header documenting the format and the vocabulary, and a test
that zh-hans has no Traditional characters or Taiwan terms.
rows were the better base (hand-adjusted mainland terms in the menus and
dialogs), so no rows were taken from #316.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator sets a paragraph's direction (Left-to-Right / Right-to-Left
Paragraph Direction in the Paragraph panel, with the Middle Eastern
options) and keeps its alignment buttons physical; it has no automatic
alignment toggle. So:
- ParaStyle.direction (None: from each paragraph's first strong
character, as before; written only when set), the Paragraph panel's two
direction buttons with Show Indic Options (original icons), and
text.setFormat {direction: "auto"|"leftToRight"|"rightToLeft"}. The
layout uses it as the base direction.
- The Automatic alignment check box is gone. Justify::Auto stays as the
start of the paragraph's direction, set on new type only (text.create,
the Type tools, with the mojikumi default in one new_type_para()):
TextObject::point is Left again, so importers (PDF, SVG, DXF, EMF) keep
their own alignment. The alignment buttons show what Auto resolves to.
- Bidi only where there is something right to left: plain paragraphs skip
the algorithm (no per-layout allocation), it runs once per paragraph
(shaping takes the paragraph's levels instead of recomputing them; path
type computed it four times), and the shaper keeps Han, Hiragana,
Katakana and Bopomofo in one segment (splitting at every change of
script cost Japanese text a shaper call per kana-kanji switch).
- Vertical type keeps its logical order, so its glyphs and lines are not
marked right to left (the caret no longer runs backwards down a column).
- PDF import puts Hebrew and Arabic, which PDFs (and VectorCraft's own
export) draw in visual order, back in logical order with the direction
that shows it as drawn; with bidi layout it came back mirrored.
- SVG import pins the direction SVG implies (left to right unless
direction: rtl); SVG export also outlines right-to-left paragraphs.
- Docs (development.md), ROADMAP (folded into the Type entry, Type core
row) and README updated; catalog rows for the new labels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Unicode bidi (unicode-bidi, unicode-script, unicode-general-category):
each paragraph's direction from its first strong character, Hebrew and
Arabic shaped right to left, embedded Latin and numbers keep theirs,
lines wrapped in logical order and reordered per line by whole
clusters; source text, undo and style ranges stay logical.
- Caret, hit testing, selection and the arrow keys follow the visual
order.
- New text aligns automatically: right-to-left paragraphs right, others
left (Justify::Auto, text.setStyle {justify: "auto"}); the Paragraph
panel highlights the resolved alignment and has an Automatic alignment
toggle. Explicit alignments, and older documents', are kept.
- SVG export outlines bidirectional text (with a warning) until it can
be written as directional live text.
A file's saved selections are untrusted: on load at most 25 are kept, names
are trimmed, capped at 255 characters and unique, and ids the document
doesn't have are dropped (after fix_next_id such an id would select whatever
object is drawn next). Save and Edit Selection cap names the same way. The
limit, the name cleanup and the default "Selection N" live on
SavedSelection, shared by the engine, the Save Selection dialog and the
Select menu's slot table. docs/mcp.md documents the select.save /
savedList / recall / editSaved commands; ROADMAP counts 13 stubbed menu items
and names what's still missing (Update Selection, the Layers panel menu).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
normalize_panel walks DockTab::ALL and ICON_PANELS instead of repeating the
dock tab ids. vectorcraft://object/{id} turns only a missing object into
-32602; no document or an unreachable app stay backend errors, as before.
docs/mcp.md documents document.node's summary flag and the panel names
open_panel takes; control-protocol.md the window.panel names. The ROADMAP
states the measured speed-up (a leaf read on 2,000 objects: ~20 ms to ~0.06 ms).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- 28 rows for strings that landed on main after #317 was written (Layers
panel menu and options, Release to Layers, the Graphics Processor
preference), so the Japanese catalog stays complete.
- Fixes: Live Paint Bucket is ライブペイントツール (was the selection
tool's name), the File Info rating stars read {n} つ星 (were "rays"),
Flare Tool Options and Symbol Sprayer match their tool names, Rectangular
Grid matches its tool (長方形グリッド), recovery data is 復帰用データ
throughout, (今後対応予定) for every roadmap note.
- Consistent spelling: フォルダー, 切り替え, Web サイト, 英語 (米国), and
a half-width colon after every field label, as in the other 200 rows.
- tests: KEEPS_MENU_NAMES gets its own doc comment instead of taking
MENU_KEEP_AS_IS's.
- ROADMAP and docs/development.md: Japanese ships complete, Czech covers
the menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Paragraph panel's mojikumi control is one of the panel's options
(hidden with Hide Options) and appears when Preferences > Type > Show
East Asian Options is on, as Illustrator shows its Mojikumi and Kinsoku
sets; it is labelled Mojikumi Set. ROADMAP notes where it lives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add Snapping to the Artboard Tool
Merged with the Artboard tool's Alt-drag duplicate (#348): a copy snaps too, and to the artboard
and art it leaves behind (a move skips them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Text in fonts that aren't installed comes in as live type in the fallback font again, named as
before (Helvetica-Bold → Helvetica Bold), not outlines plus pink copies on a non-printing layer.
- The installed face that matches a PDF font is decided once per font from its first comparable
glyph, not per glyph (loading up to 64 faces each time, and switching style mid-line).
- Kangxi radicals are unified only for text from Adobe's CID tables, not ToUnicode maps.
- A line is laid out again only when tracking changed it.
- CidText::of is tested on data that isn't a CID-keyed CFF (embedded fonts are untrusted).
- NOTICE: Adobe CMap resources (BSD-3-Clause) bundled through hayro-cmap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the crates/ui-egui/src/i18n/pt-br.tsv catalog (Brazilian Portuguese):
every menu label, every tl! literal of the shell and the plural messages
(2533 strings + 13 plurals), written clean-room in ordinary Brazilian
Portuguese computing vocabulary, placeholders and trailing ellipses kept
in lockstep with the English source.
Register the language in i18n::LANGUAGES (code pt-br, native name
"Português (Brasil)", one/other plural rule) so the Language menu, the
preference and the system-locale match (pt_BR → pt-br) pick it up.
Extend the menu-label test to pt-br: it covers every menu label like cs
and ja, and keeps the MENU_KEEP_AS_IS strings (product name, language
names, workspace names, perspective grid presets) in English.
Update docs/development.md and ROADMAP.md accordingly.
Line-end Punctuation Half Width now also spaces Japanese from Latin
letters and digits (JLREQ 3.2.2): a quarter em of the Japanese
characters' size between a kana/kanji (or full-width letter) and a
Latin letter or digit, either way round — 雅楽 2026 年, not 雅楽2026年 —
horizontal and vertical (around sideways Latin).
- Not next to punctuation or symbols, not inside or around a
tate-chu-yoko block (it is set as one Japanese character), and none
left at the end of a line.
- Mojikumi None (older documents, imported text) is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The grid was drawn whenever its `visible` flag was set or a perspective
tool was active, and choosing the Perspective Grid tool (Shift+P) didn't set
the flag. So with the tool chosen, View > Perspective Grid > Hide Grid
(perspective.grid.show) turned the hidden flag on instead of off and the
grid stayed on screen however it was toggled.
Choosing a perspective tool now shows the grid (sets `visible`, view state,
no undo step), and the grid, its widget and the Perspective Grid tool's
handles are drawn only while it is visible. Hide Grid hides it with the
tool still chosen; choosing the tool again shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Parity: Object › Path › Remove Anchor Points now runs the new command (`path.removeAnchors`,
the menu's feature name) instead of `path.deleteAnchors`, which deleted the anchors with their
segments and opened closed paths; that stays the Delete key's command ("Delete Anchor Points",
off the menu). No second "Smart" item.
- Geometry: the refit moves to `vectorcraft_pathops::remove_anchor` on the existing least-squares
fitter (fixed end tangents, a golden-section search for where the curve passes the removed
point) instead of a ~1,000-candidate grid search in geom (about 4 ms per anchor, now well under
0.1 ms). Two straight sides stay one straight side (a rectangle loses a corner and becomes a
triangle), as Illustrator does; non-finite input leaves the handles alone.
- The Delete Anchor Point tool (`path.removeAnchor`) uses the same function, replacing its
heuristic handle stretch; the explicit id/anchor and `fit` params of the new command are dropped
as duplicates of it. The command is enabled by direct-selected anchors (`has_anchors`), not a
UI override.
- The Control bar shows an icon button (the Delete Anchor Point icon, tooltip "Remove Anchor
Points") instead of a 204 pt text button; the labels reuse the translated "Remove Anchor
Points"; zh-hant gains "Delete Anchor Points". The Pen test that pinned Alt-click as plain Pen
(Illustrator's Alt over an anchor is Convert Anchor Point) is dropped.
- Tests for the refit, closed paths, straight sides and bad input; docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
path.smartRemoveAnchor stays. Object › Path, the Control bar, the contextual task bar, Properties, and the canvas context menu run it on direct-selected anchors. The Pen no longer uses Alt/Option for this, so that key stays free for Convert Anchor Point.
Dragging a direction handle with Direct Selection or the Anchor Point tool
sent the pointer position straight to path.setHandle: Shift did nothing and
the handle never snapped, while the Pen already constrains the handles it
pulls out.
guides::snap_handle places a dragged handle: with Shift at a multiple of
45° from its anchor (the Pen's constraint, keeping the dragged length),
otherwise snapped as a drawn point is (smart guides, the grid, pixels).
Both tools use it and show the smart guides while the handle moves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Use the paint owner, as a dropped swatch does. The Asset Export panel's drop zone uses
the shared art_drop too. Note the new drag and drop in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
artboard.move with copy and artboard.duplicate now make the copy with one helper: a
new id that can't overflow and a name of its own (`<name> copy`, then `<name> copy 2`…,
so two copies of one artboard no longer share a name). `moved` lists the copies a copy
moved rather than the originals it left. Test it with and without moveArt, and note
Alt-drag in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
As in Illustrator, double-clicking an artboard's number goes to it (fits it in the
window) and double-clicking the name renames it. A row's Options button chooses the
Artboard tool on that row's artboard, clicking a row moves the Artboard tool to it
while it is chosen, and an artboard clicked with the Artboard tool becomes the active
one the panel highlights. Note it in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Illustrator's Alt-click on a layer's eye hides the other layers and, once they are
hidden, shows every layer again; the lock column does the same with Lock Others and
Unlock All Layers. Reuse the panel menu's commands (one undo step each, named as the
menu items) instead of toggling the row's siblings, so a sublayer's or an object's row
stands for its top-level layer. Document it in the ROADMAP and docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
