* Layers: clip groups follow New Layer, Arrange, Reorder and Delete (#2203)
Adding, moving or deleting layers never touched Layer::clipped, so a
new layer above a clipping base split its group and became the base of
the layers clipped above it, and moving or deleting a base left its
clipped layers clipping to whatever ended up below them.
The new clip_group module applies Photoshop's rules, measured on #2203:
a layer added or moved joins the clip group it lands in; a clipped
layer moved stays clipped while it still sits on a clip group; the
layers clipped to a base that moves away or is deleted are released;
and a clipped run left with nothing below it is released. They are
applied by layer.new.layer (new clipToPrevious param, Photoshop's Use
Previous Layer to Create Clipping Mask), layer.arrange.*, layer.moveTo
(Layers panel drags, batches and ⌥-drag copies) and layer.delete.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Layers: the New Layer dialog (Layer › New › Layer…, ⇧⌘N)
Layer › New › Layer… made a layer straight away. It now opens
Photoshop's New Layer dialog: Name (focused and selected), Use Previous
Layer to Create Clipping Mask, Color, Mode, Opacity, and Fill with
<mode>-neutral color, greyed out with "(No neutral color exists for
<mode> mode.)" for modes that have none. OK makes the layer in one
history step.
layer.new.layer gains mode, opacity, color and fillNeutral params
(new engine module new_layer.rs) beside clipToPrevious. The neutral
colors (white for the darkening modes and Divide, black for the
lightening and difference modes, 50% gray for the light modes) are
checked by compositing at 8, 16 and 32 bits.
As in Photoshop, the Layers panel's New Layer button still makes a
layer at once and ⌥-click opens the dialog; commands with params
(automation, Actions, MCP) never show it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Actions: a command that runs other commands is recorded once (#3067)
A journaled command that called Session::execute journaled the inner
calls as well as its own entry, so a recorded action replayed them twice
(Straighten Layer: rotate + crop, then Straighten again). dispatch now
remembers the journal length when a command starts; when a replayable
command succeeds its entry replaces the entries of the commands it ran.
Edit > Transform > Again is not replayable and keeps its concrete transform.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Actions: Again on a Copy records its steps; taken-back steps are dropped (#3067)
- edit.transform.againCopy is not replayable, like Transform Again (#1440):
it records layer.duplicate + edit.transform, which play in a session
that never ran a transform. With one layer selected the duplicate names
no layer id, so it plays on any document.
- compound, Again on a Copy and Frame from Layers take back what they ran
when they fail; they now also drop those commands from the journal, so
recording does not replay an undone edit.
- Recording pauses while a replayable command runs: a script that plays an
action no longer flushes its earlier steps into the recording and loses
its own entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adding, moving or deleting layers never touched Layer::clipped, so a
new layer above a clipping base split its group and became the base of
the layers clipped above it, and moving or deleting a base left its
clipped layers clipping to whatever ended up below them.
The new clip_group module applies Photoshop's rules, measured on #2203:
a layer added or moved joins the clip group it lands in; a clipped
layer moved stays clipped while it still sits on a clip group; the
layers clipped to a base that moves away or is deleted are released;
and a clipped run left with nothing below it is released. They are
applied by layer.new.layer (new clipToPrevious param, Photoshop's Use
Previous Layer to Create Clipping Mask), layer.arrange.*, layer.moveTo
(Layers panel drags, batches and ⌥-drag copies) and layer.delete.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tools: Artboard tool (#2858)
Photoshop's Artboard tool in the Move flyout (V, ⇧V cycles Move ↔ Artboard):
dragging on an empty spot draws a new board (`layer.new.artboard`), clicking a
board selects it, dragging it moves it with its contents, and the selected
board's edge and corner handles resize it (`layer.artboard.set`,
moveContents: false). Each gesture is one undo step. Options bar: Size preset,
W/H, Make Portrait, Make Landscape, Add New Artboard. Original toolbar glyph
(assets/icons/artboard.svg, ATTRIBUTION.md row).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Artboard tool: '+' buttons add a board beside the selected one; ⇧ keeps proportions (#3033)
With the Artboard tool, the selected board shows a "+" button beside each
side. A click adds an empty board of the same size (background and preset
copied) on that side, the 100 px artboard gap away and past any board in
the way; ⌥-click adds a copy with its contents instead. A board left of or
above the canvas origin shifts the whole document right/down and grows the
canvas, so it stays visible. Both go through the new engine command
`layer.artboard.addBeside` {layer?, side, duplicate} (one undo step).
⇧ while dragging a corner handle keeps the board's aspect ratio: the
opposite corner stays and the board scales by the larger axis factor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Paths: Stroke Path with any brush-based tool and Simulate Pressure (#2978)
path.stroke now takes every brush-based tool of Photoshop's Stroke Path
dialog: besides the Brush, Pencil and Eraser it renders itself, the
Background Eraser, Clone and Pattern Stamp, Healing and Spot Healing
Brush, History Brush, Blur, Sharpen, Smudge, Dodge, Burn, Sponge, Color
Replacement and Mixer Brush run their paint.* command along each
subpath, in one history step, with only path.stroke journalled.
simulatePressure resamples each subpath and ramps the pressure from 0 at
its start to full at the middle and back to 0 at its end, so a brush
whose size follows pen pressure tapers at both ends.
The Stroke Path dialog (Pen/Path Selection right-click menu, the Paths
panel row menu, Alt-click on the panel's Stroke button) asks for the
tool and Simulate Pressure, as in Photoshop. Scorecard TOOL-214-11 done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Automation: classify path.stroke's params as a document vector path (#2978)
The new Stroke Path params doc says the tools run "along the path", which
registry_filesystem_path_params_are_classified reads as a possible host
file path. path.stroke strokes a document path and forwards only to
paint.* commands that take no files, so it joins the vector-path list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
select.rect takes an optional `line` ("row"|"column"); the canvas sends it
for the Single Row / Single Column Marquee, so History records
"Single Row Marquee" / "Single Column Marquee" instead of
"Rectangular Marquee". An unknown `line` is an error.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(crop): unlock Background when extending canvas (#3081)
* Crop: fill an extended Background with the background colour
Photoshop's Crop tool keeps the Background when the frame extends past
the canvas and fills the added area with the background colour, as an
opaque Canvas Size extension does. Do that instead of converting the
Background to a normal layer; other layers still get transparent pixels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Transform: Distort, Perspective and Warp keep shape layers live (#3009)
Edit › Transform › Distort / Perspective and Warp on a shape layer let the
user edit the box or mesh and then refused at commit ("needs a rasterized
shape"). Photoshop maps the shape's path and keeps it a shape.
- photocraft-vector: new `map` module. `map_points` sends every anchor and
control point through a map (Distort / Perspective: exact for straight
segments, exact end tangents for curves). `map_path` follows a curved map
(Warp), halving each segment until the mapped control points follow the
mapped curve within a tolerance (at most 64 pieces a segment, bounded in
total); straight segments whose image is straight stay straight.
- engine: `transform_layer` and `warp_layer` map a shape's path instead of
refusing; a live rectangle/ellipse/polygon/line becomes a plain path. A
linked vector mask now follows Distort / Perspective / Warp too. A map that
sends a point to infinity is an error, not a corrupt path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Transform Path: Distort, Perspective and Warp apply to paths (#3027)
path.transform accepted only an affine matrix, so the Free Transform
Path commit refused any box pulled out of a parallelogram ("Distort and
Perspective can't be applied to a path"), and Warp was not offered on a
path at all. path.transform now also takes a `quad` (with an optional
`rect` frame, default the path's control bounds) and a warp (`style`,
`mesh` or `warp`, as edit.transform.warp), validated (finite numbers,
magnitude at most 1e6, non-degenerate quad) and mapped with the
vector::map helpers from #3025. A parallelogram quad stays affine, so a
live shape stays live. The UI commit sends the quad or warp instead of
refusing, and Transform Path offers Warp; each is one undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Edit › Transform › Distort / Perspective and Warp on a shape layer let the
user edit the box or mesh and then refused at commit ("needs a rasterized
shape"). Photoshop maps the shape's path and keeps it a shape.
- photocraft-vector: new `map` module. `map_points` sends every anchor and
control point through a map (Distort / Perspective: exact for straight
segments, exact end tangents for curves). `map_path` follows a curved map
(Warp), halving each segment until the mapped control points follow the
mapped curve within a tolerance (at most 64 pieces a segment, bounded in
total); straight segments whose image is straight stay straight.
- engine: `transform_layer` and `warp_layer` map a shape's path instead of
refusing; a live rectangle/ellipse/polygon/line becomes a plain path. A
linked vector mask now follows Distort / Perspective / Warp too. A map that
sends a point to infinity is an error, not a corrupt path.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A file with no embedded ICC profile whose EXIF ColorSpace tag says sRGB
(what cameras write) now opens as sRGB, as in Photoshop: it is tagged
sRGB before the Color Settings policy runs, so it is kept, reported as a
mismatch, or converted like any embedded profile. Before, it was read as
untagged and took the working space, so with a wide working space such
as Display P3 its colours were reinterpreted.
Preferences › File Handling › Ignore EXIF Profile Tag (off by default)
restores the untagged reading, and is now shown in the dialog.
photocraft_codecs::exif_color_space reads the tag from the Exif sub-IFD,
bounds-checked; anything malformed reads as no tag. Settings that do
nothing: 43 → 42 of 150.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Installed ICC profiles in the profile menus, and Mirror in Print
- photocraft_engine::installed_profiles: scans the OS colour profile
folders (Windows, macOS, Linux), bounded and cached; new
edit.installedProfiles command.
- Print's Printer Profile and the Proof Setup, Convert to Profile and
Assign Profile dialogs list the installed profiles after the
built-ins; a profile given by path that isn't listed shows by name.
- file.print emulsionDown mirrors the page (PDF and preview), with a
Functions › Emulsion Down (mirror) checkbox.
- Print dialog: cm/mm/in, Height and Width fields, Print Resolution.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print dialog: translate Emulsion Down, Functions, Print Resolution in every catalog; cargo fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Type: ask to rasterize before Warp on live type (#3004)
Edit › Transform › Warp (the menu, or the warp toggle of an open transform
box) on editable type opened Warp mode, let the user shape the mesh, then
failed on commit with "Warp needs rasterized type". It now opens Photoshop's
"This type layer must be rasterized before proceeding…" prompt, the one the
pixel tools already use. OK applies an open transform box, rasterizes the
type (its own history state) and opens Warp on the pixels; Cancel does
nothing. The prompt's continuation is a menu command from an allow-list,
run with the egui context right after the confirm (control channel, OK
button) or on the next frame.
Distort and Perspective stay greyed for type (#2701), Puppet Warp and
Perspective Warp stay greyed for non-pixel layers, as in Photoshop.
Scorecard TYPE-218-9 -> done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Type: Warp on live type takes the warp styles, no rasterize prompt (#3004)
Photoshop 2026 keeps Edit › Transform › Warp enabled on live type and asks
nothing: the mesh can't be dragged, only the options bar's warp styles
(Warp Text's) apply, and the type stays editable. The earlier version of
this change asked to rasterize first; that is gone (and with it the prompt
continuation, which nothing else used).
Warp mode on a type layer now starts from the layer's own Warp Text style
over the unwarped type, ignores mesh drags and splits (Split, Grid and the
Custom style are greyed/hidden, the split menu items are greyed), and the
commit runs edit.transform.warp, which on type sets the Warp Text: one
history step, recordable, the layer stays Text. None takes a warp off. A
box scaled or rotated before toggling Warp is applied first.
Scorecard TYPE-218-9 note updated: Photoshop doesn't prompt for Warp;
Distort and Perspective stay greyed (#2701).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
`hasMask` in document inspection covers only raster masks, so a layer
with a vector mask looked unmasked to an agent. Layers, groups included,
now also report `hasVectorMask` and `vectorMaskEnabled` (null when there
is no vector mask). `hasMask` keeps its meaning.
* Select and Mask: Output To New Document, with or without a layer mask (#2998)
select.refineEdge takes output newDocument / newDocumentWithMask: a new
document like the source (size, mode, depth, resolution, profile) with
the active layer cut out by the refined edge, or with the matte as a
layer mask. The source document is left untouched. The dialog's Output
choice lists all six targets, translated in every catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: drop the duplicate pt-br New Layer row (main already has it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* File Handling: wire Image Previews to embed a PSD thumbnail (#204)
Preferences > File Handling > Image Previews is live for PSD/PSB saves. With
Always Save (the default) and Ask When Saving, the file carries Photoshop's
thumbnail image resource (1036: the 28-byte kJpegRGB header and a JFIF stream,
at most 160 px on the long side); Never Save writes none. The thumbnail is the
reduced composite converted to sRGB through the document's profile with
photocraft-cms (8/16/32-bit; Gray, CMYK and Lab become RGB), over white where
transparent. Ask When Saving has no Save As checkbox yet, so it saves the
preview, as Photoshop's checkbox starts on.
The preference reaches Save, Save As, Save a Copy and automation saves in the
app (ExportSettings.image_previews), and the engine's headless saves
(file.saveACopy, batch, Layers/Comps/Artboards to Files) through SaveOpts.
photocraft_io::ExportOptions gains image_previews (default on).
Settings that do nothing: 32 of 153 (#204).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* File Handling: rustfmt the Image Previews save path
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The first type.create starts the shared text engine, which scans every
system font once (3.5-5 s under load). panic_hunt billed that to
type.create against its 4 s deadline and failed intermittently. A real
hang reproduces, one-time setup does not: a timeout now counts only if a
rerun on a fresh session times out too.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Character section (Properties and Window > Character) shows one slider
per axis of the style's variable font below the font style (Weight, Width,
Slant, Italic, or the font's own tag), setting type.setStyle variations; a
drag is one history step. Optical size has no slider: the layout now sets
opsz to the type size unless the style sets it, as CSS font-optical-sizing
auto. Picking a font style or weight resets the wght axis to it, so an
earlier slider value no longer overrides the style the dropdown shows.
Scorecard TYPE-218-4 -> done.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add FITS read/write codec
FITS (the astronomy format) opens and saves as a flat image: the primary
HDU or first IMAGE extension; gray, or RGB when NAXIS3 = 3; BITPIX 8/16/
32/64/-32/-64 with BSCALE/BZERO/BLANK; rows follow ROWORDER (bottom-up by
default). Camera U16 data stays exact; float data is normalised to 0..1.
Header cards round-trip as text metadata (HIERARCH for long names).
Tile-compressed (fpack) files are refused as unsupported.
Wired into File > Open, Save As and the batch commands as .fits/.fit/.fts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test FITS open and save through photocraft-io
Gray 16-bit, RGB 8-bit and RGB 32-bit float documents round-trip exactly,
and header cards travel as the document's text metadata.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* FITS: hostile-header regression test (absurd axes, bad BITPIX, no END, HDU chains, overflowing sizes)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Keep Quick Mask's empty start and Select All apart (#2743)
Quick Mask stored "no selection" as an all-white mask, the same as Select
All. With Color Indicates Selected Areas that white was coloured over the
whole canvas, and leaving Quick Mask turned any all-white mask (a real
Select All too) into no selection.
The document now records that Quick Mask was entered with no selection.
The empty mask is white for Masked Areas and black for Selected Areas, so
neither shows colour; switching the option on an untouched empty mask
keeps it empty. On exit only that untouched white start becomes no
selection, so Select All survives the round trip. The flag is saved with
the document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Quick Mask tests: pass the active layer to channel_view::render (new main signature)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Fabio Lussi <198260595+itrycodinganditsbad@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Add a "Rainbows" group to the built-in Gradients panel with five presets: Rainbow,
Pastel Rainbow, Neon Rainbow, Oil Slick and Rainbow Fade. The three hue ramps sample 13
evenly spaced hues (red 0 deg to magenta 300 deg) so the transitions are smooth rather
than the seven coarse ROYGBIV points; Rainbow Fade reuses the classic ramp with
transparent ends. All colours are original (clean-room).
Covered by a new engine test, presets::tests::rainbow_gradient_presets.
Layer › Combine Shapes › Unite / Subtract Front Shape / Intersect Shape
Areas / Exclude Overlapping Shapes only changed the operations between the
components of the active layer. With two single-shape layers selected (the
report's case) the active layer had one component, so nothing happened.
With two or more shape layers selected and no `layer`/`subpath` param, the
commands now merge them into the top-most layer in one history step: the
bottom layer's components keep their operations and every component of the
layers above takes the chosen one, in stacking order, then the other layers
are removed. Merge Shape Components merges them the same way (each layer
combined) and bakes the result. Selected non-shape layers are left alone,
locked layers refuse the merge, and one selected layer behaves as before.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Select and Mask: live preview in Photoshop's view modes (#1754)
The Select and Mask dialog had no preview of the refined selection. It now
previews live in Photoshop's view modes: Onion Skin (default), Marching
Ants, Overlay, On Black, On White, Black & White and On Layers, with a
per-view Opacity, Show Edge (J) and Show Original (P). F cycles the views,
O/M/V/A/T/K/Y pick one and holding X shows the image without a view.
The view state lives in the dialog's fields, so ui.dialog.set drives it.
The preview runs select.refineEdge on the proxy with output=selection and
builds the view from it (veil fill layers, a layer mask, or the refined
selection, whose marching ants the canvas draws scaled back up), through
the existing filter-preview worker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Select and Mask: Refine Edge Brush (#2972)
Select and Mask had no Refine Edge Brush. select.refineEdge now takes
refineStrokes: [{"points":[[x,y],...],"size":px,"mode":"add|subtract"}],
applied in painting order. Added areas become unknown and take a colour
estimate: each pixel's colour projected on the line between the mean known
foreground and background colours around it (normalised convolution over
a box of the brush size, four times as far where none are near), so hair
or fur beyond the edge-detection band joins the selection. Subtracted
areas keep the original edge. Malformed or oversized strokes are rejected
(stroke / point / swept-area limits), never a panic.
The dialog gets the brush: Refine Edge Brush (R), Mode (Expand Detection
Area / Restore Original Edge, Alt swaps), Size ([ and ]) and Clear Brush
Strokes. With it on, dragging on the canvas paints strokes into the
dialog's refineStrokes field, so the live preview, Show Edge and OK use
them, and ui.dialog.set / agents drive them like any other param.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Color Sampler tool (#1046)
Add the Color Sampler to the Eyedropper (I) flyout: click to pin numbered
sample points to canvas pixels, drag to move, Alt-click (or drag off-canvas)
to remove, Clear All in the options bar, at most 10 per document. Each point
reads one composite pixel (RGB 0-255 and naive device CMYK, same as the
pointer readout) and the Info panel lists them under their number with the
position in the ruler unit; the readouts refresh when the document changes.
Points are per-document engine view state (DocState.color_samplers): they
belong to their document, are discarded on close, and are not saved to
.pcraft or PSD. They are driven by commands shared by the UI, CLI, control
channel and MCP (view.colorSamplers.add/.move/.delete/.clear/.list); the
mutations change no pixels and add no History step.
Points follow the canvas geometry (crop, Canvas Size, Image Size, Image
rotation/flip, rotated crop) through a pending Session.sampler_map that
Session::edit applies before culling the points that land outside the new
canvas; the count removed is reported in the status bar.
- engine: new sampler_cmds.rs (commands + shared readout helpers) and the
sampler_map wiring in lib.rs, image_cmds.rs, mode_cmds.rs, commands.rs,
analysis_cmds.rs (compound rolls points back on error).
- ui-egui: Tool::ColorSampler + original sampler.svg icon, toolbar slot,
Info panel list, options bar, pointer handling, overlay markers, cursor.
- docs/scorecard.md regenerated (TOOL-1649-1 no longer says the tool is
missing). No menu item, so parity is unchanged (627/627).
* Color Sampler follow-up: tool count, README, i18n, roadmap
The full ui-egui suite (not just the filtered tests) surfaced these gaps:
- state.rs: Tool::ALL.len() assertion 52 -> 53.
- README.md: "52 tools" -> "53 tools" and add Color Sampler to the list,
so readme_tool_list_matches_tool_all passes.
- i18n: the options-bar hint, "{n} of {max} sample points" and
"No document open" need entries in every catalog that claims complete
menus (every_tl_literal_is_translated); added to all 16 (coverage
1584/1584). The translations were drafted alongside the tool.
- docs/roadmap.md: drop Color Sampler from the missing-tools list and note
it landed.
* Color Sampler: fit main's new tools and Image Size resample type
Reset Tool covers ColorSampler, the test ViewXform sets aspect, and
Image Size checks Method::None instead of an Option.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Populate View › Proof Setup dialog fields from the active document's
current proofing condition rather than schema defaults or remembered
values from other documents. This ensures opening Custom Proof Setup and
confirming unchanged preserves the active proof profile and condition.
Fixes#3055.
Preferences › Units & Rulers › New Document Preset Resolutions did nothing:
Print Resolution was hidden as unread, and the File › New presets always used
300 / 72 ppi. As in Photoshop, print and photo presets now keep their size in
inches at the Print Resolution (Letter at 200 ppi is 1700 x 2200 px), and
screen presets keep their pixels at the Screen Resolution. The Clipboard
preset keeps the copied pixels. Values that are not positive and finite (a
hand-edited preferences file) leave the preset as listed, and sizes clamp to
the file.new limit.
Print Resolution is now shown in the Preferences dialog; settings that do
nothing: 43 -> 42 of 150.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
View › Rulers (⌘R) now writes unitsAndRulers.showRulers, which is applied
at launch and whenever the preference changes, so new and opened documents
show the rulers as last set, as in Photoshop. The Preferences dialog doesn't
list it: the View menu sets it.
Guides are Vec<f64> (doc, New Guide/Move Guide, guide layouts, artboard and
canvas geometry, snapping, PSD resource 1032), so a guide placed in ruler
units or read from a PSD's 1/32 px positions keeps its exact place.
Scorecard UI-217-20 done (part of #217).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > Type > Show Font Names in English (default on) now drives the
font menus (Type options bar, Character panel, style and Glyphs panels). With
it off, a family whose name table carries a non-English family name (e.g.
"MS Gothic" -> "ＭＳ ゴシック", "Microsoft YaHei" -> "微软雅黑") is listed by
that native name, sorted by the shown label, and the search matches either
name. Choosing it still applies the English family, so documents and PSD
output never change with the preference.
- text: FontDb::localized_family_names() reads each family's first face
(typographic family name, else family name) and a pure localized_name()
picks the first non-English record.
- ui-egui: sync_font_names() publishes the labels to the egui context once a
frame (cached per font generation); family_picker_in shows them.
- prefs: the row is no longer hidden; scorecard: dead settings 43 -> 42.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Every effect with a contour (Drop/Inner Shadow, Outer/Inner Glow, Satin,
Bevel & Emboss Gloss Contour and Contour element) now shows a contour
thumbnail with a preset picker and an Anti-aliased checkbox. Clicking the
thumbnail opens the Contour Editor: add/drag/delete points (the shared
point-curve editor), Corner per point, Input/Output, Preset, and Load…/Save…
of .shc contour files, read and written from Adobe's public File Formats
Specification (Contours). Edits go to the dialog's pending params, so the
preview follows and OK applies them in the one layer.layerStyle.replace.
- doc: Contour::Custom gains per-point corner flags (serde default).
- compose: contour_curve_lut splits the spline at corner points; CPU and
GPU effects use it.
- engine: the 12 standard presets with our own control points (older names
still accepted); `contour` params also take a curve object
{name, points, corners}; antiAlias params; Satin contour; the bevel
Contour element edits in place; contours_from_shc / contour_to_shc.
- io: PSD contour points read and write the Cnty (continuity) flag.
- psd: shc.rs parser/writer.
- scorecard FILE-215-15 missing -> partial.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Layers: Pattern Fill dialog for new and edited pattern fill layers (#2908)
Layer > New Fill Layer > Pattern... created the layer with default
settings and no dialog, and double-clicking a Pattern Fill thumbnail only
opened Properties, which has no pattern controls, so a pattern fill could
not be adjusted after creation.
Both now open Photoshop's Pattern Fill dialog: the pattern swatch picker,
Snap to Origin, Angle, Scale and Link with Layer, previewed live on the
canvas from a document snapshot. OK runs one engine command, so it is one
History step; Cancel changes nothing (a new layer is not created).
- engine: new `layer.fill.pattern.set` (pattern_fill_cmds) edits a Pattern
Fill's pattern, scale, angle, link and phase in one undo step, validating
every param; `preview` applies it or `layer.newFillLayer.pattern` to a
copy of the document for the dialog. `new_fill_layer`'s edit is shared
as `insert_fill_layer` so the preview is exactly what OK commits.
- ui: pattern_fill_ui (dialog body, OK, canvas preview), routed from the
menu item (no params) and Layer Content Options; explicit params still
run the engine directly. Catalog entries for the new strings.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Pattern Fill test: pick the swatch picker's Patterns button (main added a Patterns dock tab)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Tools: wire Enable Flick Panning for the Hand tool (#204)
Preferences > Tools > Enable Flick Panning (default on) was never read.
Like Photoshop, a Hand drag (the selected Hand, the Space-held Hand or a
middle-button drag) released while the pointer is still moving now keeps
the view gliding that way and slows smoothly to a stop; a click, new drag
or key press stops it. Off, the view stops where the drag ended.
flick_pan.rs holds the pure state: the release velocity from the last
80 ms of drag steps, an exponential friction step (tau 0.18 s, so a fast
flick rests in under a second), a start/stop speed threshold, and clamps
for huge, NaN or infinite numbers. The canvas drives it per frame with
request_repaint only while gliding; with Overscroll off the glide is
clamped like the scrollbars and stops at the pan limit.
Settings that do nothing: 43 -> 42 of 149 (docs/scorecard.md).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Preferences: show Enable Flick Panning now that the Hand tool reads it (#204)
Remove tools.enableFlickPanning from prefs::HIDDEN_UNTIL_IMPLEMENTED so the
prefs_usage test passes and the dialog shows it; regenerate the scorecard
(settings that do nothing: 36 of 153) and mark flick panning done in
docs/ui-parity.md.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Channels: keep RGB off while an alpha or mask is shown, and select from that channel.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Channels: rustfmt the RGB-off view check.
Co-authored-by: Cursor <cursoragent@cursor.com>
* channel view: pass the active layer to render in main's new tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: wire Tools › Show Transformation Values (#204)
The size and angle readouts beside the pointer (marquee W/H, Crop frame
W/H and angle, Crop Straighten angle) now go through
canvas::draw_value_readout, which draws them only while
tools.showTransformationValues is on, as in Photoshop. The brush HUD
isn't a transformation value and keeps drawing.
The preference leaves HIDDEN_UNTIL_IMPLEMENTED, so Preferences › Tools
shows it (its label is already translated). Settings that do nothing:
43 → 42 of 149.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: add my display name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* feat(engine): Always Create Smart Objects When Placing gates the Place layer kind (#204)
* scorecard: regenerate after wiring Always Create Smart Objects When Placing
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Smart Objects: linked smart objects follow their files while open
As Photoshop documents ("Linked Smart Objects update automatically when
the Photoshop document is open, provided the source file has changed"),
a linked smart object whose file another app saves is re-rendered
without Update Modified Content. The desktop app stamps the active
document's linked files (size + modification time) on a worker thread
every two seconds and when its window comes back to the front; each
changed file is one Update Modified Content undo step, independent of
the selected layer. Stamps are kept per document; a file that can't be
read yet leaves no step and is tried again; files changed while the
document was closed still wait for Update Modified Content.
layer.smartObjects.updateChanged runs one look (refused over the
control channel like the other layer.smartObjects commands).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Smart Objects: a linked file that can't be read is tried again once it changes, not on every look
A linked file the automatic update couldn't read (still being written, or a
format smart objects don't read) kept its old stamp, so every two-second look
saw it as changed and read it again on the UI thread. It now keeps its new
stamp and is tried again once it changes again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Katt <238968166+KattKnight@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Image Size: Photoshop's resampling, measured
Photoshop 25.4's Image Size was measured as a black box (synthetic 16-bit
images in, exact RAW out); every method but Preserve Details' enlargement is
linear, so each was taken apart from its impulse responses.
- Bicubic is the Keys cubic at a = -0.75, not Catmull-Rom.
- Bicubic Smoother (stretched x1.15, a = -0.625) and Bicubic Sharper
(x1.05, a = -1), with a growing with the reduction, and Bicubic Automatic.
- Reducing widens the filter by 1/s; below 1/4 the image is first averaged
down to four times the target. Bilinear is never widened and averages
whole pixels below 1/2. Positions are rounded to 1/128 pixel and stop at
the edge pixel's centre.
- Two passes, the smaller scale first, clipped and stored between them; the
bicubic filter is designed for the height's scale and serves both axes.
Bicubic Automatic splits a mixed resize into Sharper, then Smoother.
- Image Size and Fit Image take automatic, bicubicSmoother, bicubicSharper
and bicubicAutomatic; the dialog lists Photoshop's methods and opens on
the interpolation preference.
On 225 probes the mean error falls from 240-550 to under 0.5 levels of
32768; 8-bit results are identical to Photoshop's for 99 % of values.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Format: one rustfmt change main needs
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* perf: Duplicate Layer recomposites only where the copy draws (#2883)
Duplicating a layer reported no damage, so the canvas recomposited the
whole document after every Duplicate Layer (P8/P9). The copy itself was
already cheap (tiles are shared Arcs). Report the copy's change bounds
instead, through the step_damage walk extended to bounded additions:
self-contained added layers (not an adjustment, not a new clipping base,
no video or excluded channels) contribute their change bounds; anything
else still recomposites everything.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* perf: pasting a layer recomposites only where it draws (#2901)
Paste (and Paste in Place, Paste Into, Paste Outside) inserted the
pasted layer through Session::edit, which reports no damage, so every
paste recomposited the whole document (P10/P11). Capture the document
before the paste and report the new layer's change bounds with
note_insert, as Duplicate Layer does (#2884). Anything that isn't
self-contained (a new clipping base, video, excluded channels) still
recomposites everything.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(ui): add guide layout dialog with live preview
* test(ui): restore path helper used by save dialog assertions
* chore(i18n): avoid conflicts with appended catalog entries
* chore: avoid append conflict for contributor credit
* Merge main: one people.toml entry for Skyfuller1303, drop the duplicate joined helper
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Frame tool (K, its own toolbar slot after the Crop group) draws a
rectangular or elliptical frame; the options bar picks the shape, Shift
constrains to a square or circle and Alt draws from the centre. A frame
drawn over the selected pixel layer's content takes that layer in;
otherwise it is an empty frame.
Frames are built as Frame from Layers builds them: a group clipped by a
layer mask (rectangular or anti-aliased elliptical). The new engine
command layer.new.frame does it in one Session::edit, so one undo step.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Elliptical Marquee tested and wrote every pixel one at a time
(Surface::write_pixel), single-threaded, with no shared full tiles. The
add/subtract/intersect modes read both selections over the whole canvas
into f32 buffers. On 6000x4000 an ellipse took ~0.6-1.1 s and a mode
combination ~0.3-0.5 s.
ellipse_surface builds the shape per row: a run of fully selected pixels
(bounded analytically, checked with the exact f32 tests at both ends)
and edge pixels that get the original per-pixel coverage test. Tiles are
built in parallel, and fully selected tiles share one tile.
combine_surfaces maps two GRAY8 selections tile by tile through a
256x256 byte table, sharing tiles that come through unchanged. Both
produce exactly the old bytes (equivalence test against the old
per-pixel code).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
